WSL2-Linux-Kernel/net/sunrpc/svcsock.c

1555 строки
40 KiB
C
Исходник Обычный вид История

/*
* linux/net/sunrpc/svcsock.c
*
* These are the RPC server socket internals.
*
* The server scheduling algorithm does not always distribute the load
* evenly when servicing a single client. May need to modify the
* svc_xprt_enqueue procedure...
*
* TCP support is largely untested and may be a little slow. The problem
* is that we currently do two separate recvfrom's, one for the 4-byte
* record length, and the second for the actual record. This could possibly
* be improved by always reading a minimum size of around 100 bytes and
* tucking any superfluous bytes away in a temporary store. Still, that
* leaves write requests out in the rain. An alternative may be to peek at
* the first skb in the queue, and if it matches the next TCP sequence
* number, to extract the record marker. Yuck.
*
* Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/fcntl.h>
#include <linux/net.h>
#include <linux/in.h>
#include <linux/inet.h>
#include <linux/udp.h>
#include <linux/tcp.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/file.h>
#include <linux/freezer.h>
#include <net/sock.h>
#include <net/checksum.h>
#include <net/ip.h>
#include <net/ipv6.h>
#include <net/tcp.h>
#include <net/tcp_states.h>
#include <asm/uaccess.h>
#include <asm/ioctls.h>
#include <linux/sunrpc/types.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/msg_prot.h>
#include <linux/sunrpc/svcsock.h>
#include <linux/sunrpc/stats.h>
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
#include <linux/sunrpc/xprt.h>
#define RPCDBG_FACILITY RPCDBG_SVCXPRT
static struct svc_sock *svc_setup_socket(struct svc_serv *, struct socket *,
int *errp, int flags);
static void svc_udp_data_ready(struct sock *, int);
static int svc_udp_recvfrom(struct svc_rqst *);
static int svc_udp_sendto(struct svc_rqst *);
static void svc_sock_detach(struct svc_xprt *);
static void svc_tcp_sock_detach(struct svc_xprt *);
static void svc_sock_free(struct svc_xprt *);
static struct svc_xprt *svc_create_socket(struct svc_serv *, int,
struct sockaddr *, int, int);
#ifdef CONFIG_DEBUG_LOCK_ALLOC
static struct lock_class_key svc_key[2];
static struct lock_class_key svc_slock_key[2];
static void svc_reclassify_socket(struct socket *sock)
{
struct sock *sk = sock->sk;
BUG_ON(sock_owned_by_user(sk));
switch (sk->sk_family) {
case AF_INET:
sock_lock_init_class_and_name(sk, "slock-AF_INET-NFSD",
&svc_slock_key[0],
"sk_xprt.xpt_lock-AF_INET-NFSD",
&svc_key[0]);
break;
case AF_INET6:
sock_lock_init_class_and_name(sk, "slock-AF_INET6-NFSD",
&svc_slock_key[1],
"sk_xprt.xpt_lock-AF_INET6-NFSD",
&svc_key[1]);
break;
default:
BUG();
}
}
#else
static void svc_reclassify_socket(struct socket *sock)
{
}
#endif
/*
* Release an skbuff after use
*/
static void svc_release_skb(struct svc_rqst *rqstp)
{
struct sk_buff *skb = rqstp->rq_xprt_ctxt;
if (skb) {
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
rqstp->rq_xprt_ctxt = NULL;
dprintk("svc: service %p, releasing skb %p\n", rqstp, skb);
skb_free_datagram_locked(svsk->sk_sk, skb);
}
}
union svc_pktinfo_u {
struct in_pktinfo pkti;
struct in6_pktinfo pkti6;
};
#define SVC_PKTINFO_SPACE \
CMSG_SPACE(sizeof(union svc_pktinfo_u))
static void svc_set_cmsg_data(struct svc_rqst *rqstp, struct cmsghdr *cmh)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
switch (svsk->sk_sk->sk_family) {
case AF_INET: {
struct in_pktinfo *pki = CMSG_DATA(cmh);
cmh->cmsg_level = SOL_IP;
cmh->cmsg_type = IP_PKTINFO;
pki->ipi_ifindex = 0;
pki->ipi_spec_dst.s_addr = rqstp->rq_daddr.addr.s_addr;
cmh->cmsg_len = CMSG_LEN(sizeof(*pki));
}
break;
case AF_INET6: {
struct in6_pktinfo *pki = CMSG_DATA(cmh);
cmh->cmsg_level = SOL_IPV6;
cmh->cmsg_type = IPV6_PKTINFO;
pki->ipi6_ifindex = 0;
ipv6_addr_copy(&pki->ipi6_addr,
&rqstp->rq_daddr.addr6);
cmh->cmsg_len = CMSG_LEN(sizeof(*pki));
}
break;
}
}
/*
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
* send routine intended to be shared by the fore- and back-channel
*/
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
int svc_send_common(struct socket *sock, struct xdr_buf *xdr,
struct page *headpage, unsigned long headoffset,
struct page *tailpage, unsigned long tailoffset)
{
int result;
int size;
struct page **ppage = xdr->pages;
size_t base = xdr->page_base;
unsigned int pglen = xdr->page_len;
unsigned int flags = MSG_MORE;
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
int slen;
int len = 0;
slen = xdr->len;
/* send head */
if (slen == xdr->head[0].iov_len)
flags = 0;
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
len = kernel_sendpage(sock, headpage, headoffset,
xdr->head[0].iov_len, flags);
if (len != xdr->head[0].iov_len)
goto out;
slen -= xdr->head[0].iov_len;
if (slen == 0)
goto out;
/* send page data */
size = PAGE_SIZE - base < pglen ? PAGE_SIZE - base : pglen;
while (pglen > 0) {
if (slen == size)
flags = 0;
result = kernel_sendpage(sock, *ppage, base, size, flags);
if (result > 0)
len += result;
if (result != size)
goto out;
slen -= size;
pglen -= size;
size = PAGE_SIZE < pglen ? PAGE_SIZE : pglen;
base = 0;
ppage++;
}
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
/* send tail */
if (xdr->tail[0].iov_len) {
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
result = kernel_sendpage(sock, tailpage, tailoffset,
xdr->tail[0].iov_len, 0);
if (result > 0)
len += result;
}
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
out:
return len;
}
/*
* Generic sendto routine
*/
static int svc_sendto(struct svc_rqst *rqstp, struct xdr_buf *xdr)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
struct socket *sock = svsk->sk_sock;
union {
struct cmsghdr hdr;
long all[SVC_PKTINFO_SPACE / sizeof(long)];
} buffer;
struct cmsghdr *cmh = &buffer.hdr;
int len = 0;
unsigned long tailoff;
unsigned long headoff;
RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]);
if (rqstp->rq_prot == IPPROTO_UDP) {
struct msghdr msg = {
.msg_name = &rqstp->rq_addr,
.msg_namelen = rqstp->rq_addrlen,
.msg_control = cmh,
.msg_controllen = sizeof(buffer),
.msg_flags = MSG_MORE,
};
svc_set_cmsg_data(rqstp, cmh);
if (sock_sendmsg(sock, &msg, 0) < 0)
goto out;
}
tailoff = ((unsigned long)xdr->tail[0].iov_base) & (PAGE_SIZE-1);
headoff = 0;
len = svc_send_common(sock, xdr, rqstp->rq_respages[0], headoff,
rqstp->rq_respages[0], tailoff);
out:
dprintk("svc: socket %p sendto([%p %Zu... ], %d) = %d (addr %s)\n",
svsk, xdr->head[0].iov_base, xdr->head[0].iov_len,
xdr->len, len, svc_print_addr(rqstp, buf, sizeof(buf)));
return len;
}
/*
* Report socket names for nfsdfs
*/
static int svc_one_sock_name(struct svc_sock *svsk, char *buf, int remaining)
{
const struct sock *sk = svsk->sk_sk;
const char *proto_name = sk->sk_protocol == IPPROTO_UDP ?
"udp" : "tcp";
int len;
switch (sk->sk_family) {
case PF_INET:
len = snprintf(buf, remaining, "ipv4 %s %pI4 %d\n",
proto_name,
&inet_sk(sk)->inet_rcv_saddr,
inet_sk(sk)->inet_num);
break;
case PF_INET6:
len = snprintf(buf, remaining, "ipv6 %s %pI6 %d\n",
proto_name,
&inet6_sk(sk)->rcv_saddr,
inet_sk(sk)->inet_num);
break;
default:
len = snprintf(buf, remaining, "*unknown-%d*\n",
sk->sk_family);
}
if (len >= remaining) {
*buf = '\0';
return -ENAMETOOLONG;
}
return len;
}
/**
* svc_sock_names - construct a list of listener names in a string
* @serv: pointer to RPC service
* @buf: pointer to a buffer to fill in with socket names
* @buflen: size of the buffer to be filled
* @toclose: pointer to '\0'-terminated C string containing the name
* of a listener to be closed
*
* Fills in @buf with a '\n'-separated list of names of listener
* sockets. If @toclose is not NULL, the socket named by @toclose
* is closed, and is not included in the output list.
*
* Returns positive length of the socket name string, or a negative
* errno value on error.
*/
int svc_sock_names(struct svc_serv *serv, char *buf, const size_t buflen,
const char *toclose)
{
struct svc_sock *svsk, *closesk = NULL;
int len = 0;
if (!serv)
return 0;
spin_lock_bh(&serv->sv_lock);
list_for_each_entry(svsk, &serv->sv_permsocks, sk_xprt.xpt_list) {
int onelen = svc_one_sock_name(svsk, buf + len, buflen - len);
if (onelen < 0) {
len = onelen;
break;
}
if (toclose && strcmp(toclose, buf + len) == 0)
closesk = svsk;
else
len += onelen;
}
spin_unlock_bh(&serv->sv_lock);
if (closesk)
/* Should unregister with portmap, but you cannot
* unregister just one protocol...
*/
svc_close_xprt(&closesk->sk_xprt);
else if (toclose)
return -ENOENT;
return len;
}
EXPORT_SYMBOL_GPL(svc_sock_names);
/*
* Check input queue length
*/
static int svc_recv_available(struct svc_sock *svsk)
{
struct socket *sock = svsk->sk_sock;
int avail, err;
err = kernel_sock_ioctl(sock, TIOCINQ, (unsigned long) &avail);
return (err >= 0)? avail : err;
}
/*
* Generic recvfrom routine.
*/
static int svc_recvfrom(struct svc_rqst *rqstp, struct kvec *iov, int nr,
int buflen)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
struct msghdr msg = {
.msg_flags = MSG_DONTWAIT,
};
int len;
rqstp->rq_xprt_hlen = 0;
len = kernel_recvmsg(svsk->sk_sock, &msg, iov, nr, buflen,
msg.msg_flags);
dprintk("svc: socket %p recvfrom(%p, %Zu) = %d\n",
svsk, iov[0].iov_base, iov[0].iov_len, len);
return len;
}
/*
* Set socket snd and rcv buffer lengths
*/
static void svc_sock_setbufsize(struct socket *sock, unsigned int snd,
unsigned int rcv)
{
#if 0
mm_segment_t oldfs;
oldfs = get_fs(); set_fs(KERNEL_DS);
sock_setsockopt(sock, SOL_SOCKET, SO_SNDBUF,
(char*)&snd, sizeof(snd));
sock_setsockopt(sock, SOL_SOCKET, SO_RCVBUF,
(char*)&rcv, sizeof(rcv));
#else
/* sock_setsockopt limits use to sysctl_?mem_max,
* which isn't acceptable. Until that is made conditional
* on not having CAP_SYS_RESOURCE or similar, we go direct...
* DaveM said I could!
*/
lock_sock(sock->sk);
sock->sk->sk_sndbuf = snd * 2;
sock->sk->sk_rcvbuf = rcv * 2;
sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK;
sock->sk->sk_write_space(sock->sk);
release_sock(sock->sk);
#endif
}
/*
* INET callback when data has been received on the socket.
*/
static void svc_udp_data_ready(struct sock *sk, int count)
{
struct svc_sock *svsk = (struct svc_sock *)sk->sk_user_data;
if (svsk) {
dprintk("svc: socket %p(inet %p), count=%d, busy=%d\n",
svsk, sk, count,
test_bit(XPT_BUSY, &svsk->sk_xprt.xpt_flags));
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
svc_xprt_enqueue(&svsk->sk_xprt);
}
if (sk_sleep(sk) && waitqueue_active(sk_sleep(sk)))
wake_up_interruptible(sk_sleep(sk));
}
/*
* INET callback when space is newly available on the socket.
*/
static void svc_write_space(struct sock *sk)
{
struct svc_sock *svsk = (struct svc_sock *)(sk->sk_user_data);
if (svsk) {
dprintk("svc: socket %p(inet %p), write_space busy=%d\n",
svsk, sk, test_bit(XPT_BUSY, &svsk->sk_xprt.xpt_flags));
svc_xprt_enqueue(&svsk->sk_xprt);
}
if (sk_sleep(sk) && waitqueue_active(sk_sleep(sk))) {
dprintk("RPC svc_write_space: someone sleeping on %p\n",
svsk);
wake_up_interruptible(sk_sleep(sk));
}
}
static void svc_tcp_write_space(struct sock *sk)
{
struct socket *sock = sk->sk_socket;
if (sk_stream_wspace(sk) >= sk_stream_min_wspace(sk) && sock)
clear_bit(SOCK_NOSPACE, &sock->flags);
svc_write_space(sk);
}
/*
* See net/ipv6/ip_sockglue.c : ip_cmsg_recv_pktinfo
*/
static int svc_udp_get_dest_address4(struct svc_rqst *rqstp,
struct cmsghdr *cmh)
{
struct in_pktinfo *pki = CMSG_DATA(cmh);
if (cmh->cmsg_type != IP_PKTINFO)
return 0;
rqstp->rq_daddr.addr.s_addr = pki->ipi_spec_dst.s_addr;
return 1;
}
/*
* See net/ipv6/datagram.c : datagram_recv_ctl
*/
static int svc_udp_get_dest_address6(struct svc_rqst *rqstp,
struct cmsghdr *cmh)
{
struct in6_pktinfo *pki = CMSG_DATA(cmh);
if (cmh->cmsg_type != IPV6_PKTINFO)
return 0;
ipv6_addr_copy(&rqstp->rq_daddr.addr6, &pki->ipi6_addr);
return 1;
}
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
/*
* Copy the UDP datagram's destination address to the rqstp structure.
* The 'destination' address in this case is the address to which the
* peer sent the datagram, i.e. our local address. For multihomed
* hosts, this can change from msg to msg. Note that only the IP
* address changes, the port number should remain the same.
*/
static int svc_udp_get_dest_address(struct svc_rqst *rqstp,
struct cmsghdr *cmh)
{
switch (cmh->cmsg_level) {
case SOL_IP:
return svc_udp_get_dest_address4(rqstp, cmh);
case SOL_IPV6:
return svc_udp_get_dest_address6(rqstp, cmh);
}
return 0;
}
/*
* Receive a datagram from a UDP socket.
*/
static int svc_udp_recvfrom(struct svc_rqst *rqstp)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
struct svc_serv *serv = svsk->sk_xprt.xpt_server;
struct sk_buff *skb;
union {
struct cmsghdr hdr;
long all[SVC_PKTINFO_SPACE / sizeof(long)];
} buffer;
struct cmsghdr *cmh = &buffer.hdr;
struct msghdr msg = {
.msg_name = svc_addr(rqstp),
.msg_control = cmh,
.msg_controllen = sizeof(buffer),
.msg_flags = MSG_DONTWAIT,
};
size_t len;
int err;
if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags))
/* udp sockets need large rcvbuf as all pending
* requests are still in that buffer. sndbuf must
* also be large enough that there is enough space
* for one reply per thread. We count all threads
* rather than threads in a particular pool, which
* provides an upper bound on the number of threads
* which will access the socket.
*/
svc_sock_setbufsize(svsk->sk_sock,
(serv->sv_nrthreads+3) * serv->sv_max_mesg,
(serv->sv_nrthreads+3) * serv->sv_max_mesg);
clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
skb = NULL;
err = kernel_recvmsg(svsk->sk_sock, &msg, NULL,
0, 0, MSG_PEEK | MSG_DONTWAIT);
if (err >= 0)
skb = skb_recv_datagram(svsk->sk_sk, 0, 1, &err);
if (skb == NULL) {
if (err != -EAGAIN) {
/* possibly an icmp error */
dprintk("svc: recvfrom returned error %d\n", -err);
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
}
return -EAGAIN;
}
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
len = svc_addr_len(svc_addr(rqstp));
if (len == 0)
return -EAFNOSUPPORT;
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
rqstp->rq_addrlen = len;
if (skb->tstamp.tv64 == 0) {
skb->tstamp = ktime_get_real();
/* Don't enable netstamp, sunrpc doesn't
need that much accuracy */
}
svsk->sk_sk->sk_stamp = skb->tstamp;
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); /* there may be more data... */
len = skb->len - sizeof(struct udphdr);
rqstp->rq_arg.len = len;
rqstp->rq_prot = IPPROTO_UDP;
if (!svc_udp_get_dest_address(rqstp, cmh)) {
if (net_ratelimit())
printk(KERN_WARNING
"svc: received unknown control message %d/%d; "
"dropping RPC reply datagram\n",
cmh->cmsg_level, cmh->cmsg_type);
skb_free_datagram_locked(svsk->sk_sk, skb);
return 0;
}
if (skb_is_nonlinear(skb)) {
/* we have to copy */
local_bh_disable();
if (csum_partial_copy_to_xdr(&rqstp->rq_arg, skb)) {
local_bh_enable();
/* checksum error */
skb_free_datagram_locked(svsk->sk_sk, skb);
return 0;
}
local_bh_enable();
skb_free_datagram_locked(svsk->sk_sk, skb);
} else {
/* we can use it in-place */
rqstp->rq_arg.head[0].iov_base = skb->data +
sizeof(struct udphdr);
rqstp->rq_arg.head[0].iov_len = len;
if (skb_checksum_complete(skb)) {
skb_free_datagram_locked(svsk->sk_sk, skb);
return 0;
}
rqstp->rq_xprt_ctxt = skb;
}
rqstp->rq_arg.page_base = 0;
if (len <= rqstp->rq_arg.head[0].iov_len) {
rqstp->rq_arg.head[0].iov_len = len;
rqstp->rq_arg.page_len = 0;
rqstp->rq_respages = rqstp->rq_pages+1;
} else {
rqstp->rq_arg.page_len = len - rqstp->rq_arg.head[0].iov_len;
rqstp->rq_respages = rqstp->rq_pages + 1 +
DIV_ROUND_UP(rqstp->rq_arg.page_len, PAGE_SIZE);
}
if (serv->sv_stats)
serv->sv_stats->netudpcnt++;
return len;
}
static int
svc_udp_sendto(struct svc_rqst *rqstp)
{
int error;
error = svc_sendto(rqstp, &rqstp->rq_res);
if (error == -ECONNREFUSED)
/* ICMP error on earlier request. */
error = svc_sendto(rqstp, &rqstp->rq_res);
return error;
}
static void svc_udp_prep_reply_hdr(struct svc_rqst *rqstp)
{
}
static int svc_udp_has_wspace(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
struct svc_serv *serv = xprt->xpt_server;
unsigned long required;
/*
* Set the SOCK_NOSPACE flag before checking the available
* sock space.
*/
set_bit(SOCK_NOSPACE, &svsk->sk_sock->flags);
required = atomic_read(&svsk->sk_xprt.xpt_reserved) + serv->sv_max_mesg;
if (required*2 > sock_wspace(svsk->sk_sk))
return 0;
clear_bit(SOCK_NOSPACE, &svsk->sk_sock->flags);
return 1;
}
static struct svc_xprt *svc_udp_accept(struct svc_xprt *xprt)
{
BUG();
return NULL;
}
static struct svc_xprt *svc_udp_create(struct svc_serv *serv,
struct sockaddr *sa, int salen,
int flags)
{
return svc_create_socket(serv, IPPROTO_UDP, sa, salen, flags);
}
static struct svc_xprt_ops svc_udp_ops = {
.xpo_create = svc_udp_create,
.xpo_recvfrom = svc_udp_recvfrom,
.xpo_sendto = svc_udp_sendto,
.xpo_release_rqst = svc_release_skb,
.xpo_detach = svc_sock_detach,
.xpo_free = svc_sock_free,
.xpo_prep_reply_hdr = svc_udp_prep_reply_hdr,
.xpo_has_wspace = svc_udp_has_wspace,
.xpo_accept = svc_udp_accept,
};
static struct svc_xprt_class svc_udp_class = {
.xcl_name = "udp",
.xcl_owner = THIS_MODULE,
.xcl_ops = &svc_udp_ops,
.xcl_max_payload = RPCSVC_MAXPAYLOAD_UDP,
};
static void svc_udp_init(struct svc_sock *svsk, struct svc_serv *serv)
{
int err, level, optname, one = 1;
svc_xprt_init(&svc_udp_class, &svsk->sk_xprt, serv);
clear_bit(XPT_CACHE_AUTH, &svsk->sk_xprt.xpt_flags);
svsk->sk_sk->sk_data_ready = svc_udp_data_ready;
svsk->sk_sk->sk_write_space = svc_write_space;
/* initialise setting must have enough space to
* receive and respond to one request.
* svc_udp_recvfrom will re-adjust if necessary
*/
svc_sock_setbufsize(svsk->sk_sock,
3 * svsk->sk_xprt.xpt_server->sv_max_mesg,
3 * svsk->sk_xprt.xpt_server->sv_max_mesg);
/* data might have come in before data_ready set up */
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
/* make sure we get destination address info */
switch (svsk->sk_sk->sk_family) {
case AF_INET:
level = SOL_IP;
optname = IP_PKTINFO;
break;
case AF_INET6:
level = SOL_IPV6;
optname = IPV6_RECVPKTINFO;
break;
default:
BUG();
}
err = kernel_setsockopt(svsk->sk_sock, level, optname,
(char *)&one, sizeof(one));
dprintk("svc: kernel_setsockopt returned %d\n", err);
}
/*
* A data_ready event on a listening socket means there's a connection
* pending. Do not use state_change as a substitute for it.
*/
static void svc_tcp_listen_data_ready(struct sock *sk, int count_unused)
{
struct svc_sock *svsk = (struct svc_sock *)sk->sk_user_data;
dprintk("svc: socket %p TCP (listen) state change %d\n",
sk, sk->sk_state);
/*
* This callback may called twice when a new connection
* is established as a child socket inherits everything
* from a parent LISTEN socket.
* 1) data_ready method of the parent socket will be called
* when one of child sockets become ESTABLISHED.
* 2) data_ready method of the child socket may be called
* when it receives data before the socket is accepted.
* In case of 2, we should ignore it silently.
*/
if (sk->sk_state == TCP_LISTEN) {
if (svsk) {
set_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags);
svc_xprt_enqueue(&svsk->sk_xprt);
} else
printk("svc: socket %p: no user data\n", sk);
}
if (sk_sleep(sk) && waitqueue_active(sk_sleep(sk)))
wake_up_interruptible_all(sk_sleep(sk));
}
/*
* A state change on a connected socket means it's dying or dead.
*/
static void svc_tcp_state_change(struct sock *sk)
{
struct svc_sock *svsk = (struct svc_sock *)sk->sk_user_data;
dprintk("svc: socket %p TCP (connected) state change %d (svsk %p)\n",
sk, sk->sk_state, sk->sk_user_data);
if (!svsk)
printk("svc: socket %p: no user data\n", sk);
else {
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
svc_xprt_enqueue(&svsk->sk_xprt);
}
if (sk_sleep(sk) && waitqueue_active(sk_sleep(sk)))
wake_up_interruptible_all(sk_sleep(sk));
}
static void svc_tcp_data_ready(struct sock *sk, int count)
{
struct svc_sock *svsk = (struct svc_sock *)sk->sk_user_data;
dprintk("svc: socket %p TCP data ready (svsk %p)\n",
sk, sk->sk_user_data);
if (svsk) {
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
svc_xprt_enqueue(&svsk->sk_xprt);
}
if (sk_sleep(sk) && waitqueue_active(sk_sleep(sk)))
wake_up_interruptible(sk_sleep(sk));
}
/*
* Accept a TCP connection
*/
static struct svc_xprt *svc_tcp_accept(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
struct sockaddr_storage addr;
struct sockaddr *sin = (struct sockaddr *) &addr;
struct svc_serv *serv = svsk->sk_xprt.xpt_server;
struct socket *sock = svsk->sk_sock;
struct socket *newsock;
struct svc_sock *newsvsk;
int err, slen;
RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]);
dprintk("svc: tcp_accept %p sock %p\n", svsk, sock);
if (!sock)
return NULL;
clear_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags);
err = kernel_accept(sock, &newsock, O_NONBLOCK);
if (err < 0) {
if (err == -ENOMEM)
printk(KERN_WARNING "%s: no more sockets!\n",
serv->sv_name);
else if (err != -EAGAIN && net_ratelimit())
printk(KERN_WARNING "%s: accept failed (err %d)!\n",
serv->sv_name, -err);
return NULL;
}
set_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags);
err = kernel_getpeername(newsock, sin, &slen);
if (err < 0) {
if (net_ratelimit())
printk(KERN_WARNING "%s: peername failed (err %d)!\n",
serv->sv_name, -err);
goto failed; /* aborted connection or whatever */
}
/* Ideally, we would want to reject connections from unauthorized
* hosts here, but when we get encryption, the IP of the host won't
* tell us anything. For now just warn about unpriv connections.
*/
if (!svc_port_is_privileged(sin)) {
dprintk(KERN_WARNING
"%s: connect from unprivileged port: %s\n",
serv->sv_name,
__svc_print_addr(sin, buf, sizeof(buf)));
}
dprintk("%s: connect from %s\n", serv->sv_name,
__svc_print_addr(sin, buf, sizeof(buf)));
/* make sure that a write doesn't block forever when
* low on memory
*/
newsock->sk->sk_sndtimeo = HZ*30;
if (!(newsvsk = svc_setup_socket(serv, newsock, &err,
(SVC_SOCK_ANONYMOUS | SVC_SOCK_TEMPORARY))))
goto failed;
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
svc_xprt_set_remote(&newsvsk->sk_xprt, sin, slen);
err = kernel_getsockname(newsock, sin, &slen);
if (unlikely(err < 0)) {
dprintk("svc_tcp_accept: kernel_getsockname error %d\n", -err);
slen = offsetof(struct sockaddr, sa_data);
}
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
svc_xprt_set_local(&newsvsk->sk_xprt, sin, slen);
if (serv->sv_stats)
serv->sv_stats->nettcpconn++;
return &newsvsk->sk_xprt;
failed:
sock_release(newsock);
return NULL;
}
/*
* Receive data.
* If we haven't gotten the record length yet, get the next four bytes.
* Otherwise try to gobble up as much as possible up to the complete
* record length.
*/
static int svc_tcp_recv_record(struct svc_sock *svsk, struct svc_rqst *rqstp)
{
struct svc_serv *serv = svsk->sk_xprt.xpt_server;
int len;
if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags))
/* sndbuf needs to have room for one request
* per thread, otherwise we can stall even when the
* network isn't a bottleneck.
*
* We count all threads rather than threads in a
* particular pool, which provides an upper bound
* on the number of threads which will access the socket.
*
* rcvbuf just needs to be able to hold a few requests.
* Normally they will be removed from the queue
* as soon a a complete request arrives.
*/
svc_sock_setbufsize(svsk->sk_sock,
(serv->sv_nrthreads+3) * serv->sv_max_mesg,
3 * serv->sv_max_mesg);
clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
if (svsk->sk_tcplen < sizeof(rpc_fraghdr)) {
int want = sizeof(rpc_fraghdr) - svsk->sk_tcplen;
struct kvec iov;
iov.iov_base = ((char *) &svsk->sk_reclen) + svsk->sk_tcplen;
iov.iov_len = want;
if ((len = svc_recvfrom(rqstp, &iov, 1, want)) < 0)
goto error;
svsk->sk_tcplen += len;
if (len < want) {
dprintk("svc: short recvfrom while reading record "
"length (%d of %d)\n", len, want);
goto err_again; /* record header not complete */
}
svsk->sk_reclen = ntohl(svsk->sk_reclen);
if (!(svsk->sk_reclen & RPC_LAST_STREAM_FRAGMENT)) {
/* FIXME: technically, a record can be fragmented,
* and non-terminal fragments will not have the top
* bit set in the fragment length header.
* But apparently no known nfs clients send fragmented
* records. */
if (net_ratelimit())
printk(KERN_NOTICE "RPC: multiple fragments "
"per record not supported\n");
goto err_delete;
}
svsk->sk_reclen &= RPC_FRAGMENT_SIZE_MASK;
dprintk("svc: TCP record, %d bytes\n", svsk->sk_reclen);
if (svsk->sk_reclen > serv->sv_max_mesg) {
if (net_ratelimit())
printk(KERN_NOTICE "RPC: "
"fragment too large: 0x%08lx\n",
(unsigned long)svsk->sk_reclen);
goto err_delete;
}
}
/* Check whether enough data is available */
len = svc_recv_available(svsk);
if (len < 0)
goto error;
if (len < svsk->sk_reclen) {
dprintk("svc: incomplete TCP record (%d of %d)\n",
len, svsk->sk_reclen);
goto err_again; /* record not complete */
}
len = svsk->sk_reclen;
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
return len;
error:
if (len == -EAGAIN)
dprintk("RPC: TCP recv_record got EAGAIN\n");
return len;
err_delete:
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
err_again:
return -EAGAIN;
}
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
static int svc_process_calldir(struct svc_sock *svsk, struct svc_rqst *rqstp,
struct rpc_rqst **reqpp, struct kvec *vec)
{
struct rpc_rqst *req = NULL;
u32 *p;
u32 xid;
u32 calldir;
int len;
len = svc_recvfrom(rqstp, vec, 1, 8);
if (len < 0)
goto error;
p = (u32 *)rqstp->rq_arg.head[0].iov_base;
xid = *p++;
calldir = *p;
if (calldir == 0) {
/* REQUEST is the most common case */
vec[0] = rqstp->rq_arg.head[0];
} else {
/* REPLY */
if (svsk->sk_bc_xprt)
req = xprt_lookup_rqst(svsk->sk_bc_xprt, xid);
if (!req) {
printk(KERN_NOTICE
"%s: Got unrecognized reply: "
"calldir 0x%x sk_bc_xprt %p xid %08x\n",
__func__, ntohl(calldir),
svsk->sk_bc_xprt, xid);
vec[0] = rqstp->rq_arg.head[0];
goto out;
}
memcpy(&req->rq_private_buf, &req->rq_rcv_buf,
sizeof(struct xdr_buf));
/* copy the xid and call direction */
memcpy(req->rq_private_buf.head[0].iov_base,
rqstp->rq_arg.head[0].iov_base, 8);
vec[0] = req->rq_private_buf.head[0];
}
out:
vec[0].iov_base += 8;
vec[0].iov_len -= 8;
len = svsk->sk_reclen - 8;
error:
*reqpp = req;
return len;
}
/*
* Receive data from a TCP socket.
*/
static int svc_tcp_recvfrom(struct svc_rqst *rqstp)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
struct svc_serv *serv = svsk->sk_xprt.xpt_server;
int len;
struct kvec *vec;
int pnum, vlen;
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
struct rpc_rqst *req = NULL;
dprintk("svc: tcp_recv %p data %d conn %d close %d\n",
svsk, test_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags),
test_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags),
test_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags));
len = svc_tcp_recv_record(svsk, rqstp);
if (len < 0)
goto error;
vec = rqstp->rq_vec;
vec[0] = rqstp->rq_arg.head[0];
vlen = PAGE_SIZE;
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
/*
* We have enough data for the whole tcp record. Let's try and read the
* first 8 bytes to get the xid and the call direction. We can use this
* to figure out if this is a call or a reply to a callback. If
* sk_reclen is < 8 (xid and calldir), then this is a malformed packet.
* In that case, don't bother with the calldir and just read the data.
* It will be rejected in svc_process.
*/
if (len >= 8) {
len = svc_process_calldir(svsk, rqstp, &req, vec);
if (len < 0)
goto err_again;
vlen -= 8;
}
pnum = 1;
while (vlen < len) {
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
vec[pnum].iov_base = (req) ?
page_address(req->rq_private_buf.pages[pnum - 1]) :
page_address(rqstp->rq_pages[pnum]);
vec[pnum].iov_len = PAGE_SIZE;
pnum++;
vlen += PAGE_SIZE;
}
rqstp->rq_respages = &rqstp->rq_pages[pnum];
/* Now receive data */
len = svc_recvfrom(rqstp, vec, pnum, len);
if (len < 0)
goto err_again;
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
/*
* Account for the 8 bytes we read earlier
*/
len += 8;
if (req) {
xprt_complete_rqst(req->rq_task, len);
len = 0;
goto out;
}
dprintk("svc: TCP complete record (%d bytes)\n", len);
rqstp->rq_arg.len = len;
rqstp->rq_arg.page_base = 0;
if (len <= rqstp->rq_arg.head[0].iov_len) {
rqstp->rq_arg.head[0].iov_len = len;
rqstp->rq_arg.page_len = 0;
} else {
rqstp->rq_arg.page_len = len - rqstp->rq_arg.head[0].iov_len;
}
rqstp->rq_xprt_ctxt = NULL;
rqstp->rq_prot = IPPROTO_TCP;
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 18:32:28 +04:00
out:
/* Reset TCP read info */
svsk->sk_reclen = 0;
svsk->sk_tcplen = 0;
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
svc_xprt_copy_addrs(rqstp, &svsk->sk_xprt);
if (serv->sv_stats)
serv->sv_stats->nettcpcnt++;
return len;
err_again:
if (len == -EAGAIN) {
dprintk("RPC: TCP recvfrom got EAGAIN\n");
return len;
}
error:
if (len != -EAGAIN) {
printk(KERN_NOTICE "%s: recvfrom returned errno %d\n",
svsk->sk_xprt.xpt_server->sv_name, -len);
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
}
return -EAGAIN;
}
/*
* Send out data on TCP socket.
*/
static int svc_tcp_sendto(struct svc_rqst *rqstp)
{
struct xdr_buf *xbufp = &rqstp->rq_res;
int sent;
__be32 reclen;
/* Set up the first element of the reply kvec.
* Any other kvecs that may be in use have been taken
* care of by the server implementation itself.
*/
reclen = htonl(0x80000000|((xbufp->len ) - 4));
memcpy(xbufp->head[0].iov_base, &reclen, 4);
if (test_bit(XPT_DEAD, &rqstp->rq_xprt->xpt_flags))
return -ENOTCONN;
sent = svc_sendto(rqstp, &rqstp->rq_res);
if (sent != xbufp->len) {
printk(KERN_NOTICE
"rpc-srv/tcp: %s: %s %d when sending %d bytes "
"- shutting down socket\n",
rqstp->rq_xprt->xpt_server->sv_name,
(sent<0)?"got error":"sent only",
sent, xbufp->len);
set_bit(XPT_CLOSE, &rqstp->rq_xprt->xpt_flags);
svc_xprt_enqueue(rqstp->rq_xprt);
sent = -EAGAIN;
}
return sent;
}
/*
* Setup response header. TCP has a 4B record length field.
*/
static void svc_tcp_prep_reply_hdr(struct svc_rqst *rqstp)
{
struct kvec *resv = &rqstp->rq_res.head[0];
/* tcp needs a space for the record length... */
svc_putnl(resv, 0);
}
static int svc_tcp_has_wspace(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
struct svc_serv *serv = svsk->sk_xprt.xpt_server;
int required;
if (test_bit(XPT_LISTENER, &xprt->xpt_flags))
return 1;
required = atomic_read(&xprt->xpt_reserved) + serv->sv_max_mesg;
if (sk_stream_wspace(svsk->sk_sk) >= required)
return 1;
set_bit(SOCK_NOSPACE, &svsk->sk_sock->flags);
return 0;
}
static struct svc_xprt *svc_tcp_create(struct svc_serv *serv,
struct sockaddr *sa, int salen,
int flags)
{
return svc_create_socket(serv, IPPROTO_TCP, sa, salen, flags);
}
static struct svc_xprt_ops svc_tcp_ops = {
.xpo_create = svc_tcp_create,
.xpo_recvfrom = svc_tcp_recvfrom,
.xpo_sendto = svc_tcp_sendto,
.xpo_release_rqst = svc_release_skb,
.xpo_detach = svc_tcp_sock_detach,
.xpo_free = svc_sock_free,
.xpo_prep_reply_hdr = svc_tcp_prep_reply_hdr,
.xpo_has_wspace = svc_tcp_has_wspace,
.xpo_accept = svc_tcp_accept,
};
static struct svc_xprt_class svc_tcp_class = {
.xcl_name = "tcp",
.xcl_owner = THIS_MODULE,
.xcl_ops = &svc_tcp_ops,
.xcl_max_payload = RPCSVC_MAXPAYLOAD_TCP,
};
void svc_init_xprt_sock(void)
{
svc_reg_xprt_class(&svc_tcp_class);
svc_reg_xprt_class(&svc_udp_class);
}
void svc_cleanup_xprt_sock(void)
{
svc_unreg_xprt_class(&svc_tcp_class);
svc_unreg_xprt_class(&svc_udp_class);
}
static void svc_tcp_init(struct svc_sock *svsk, struct svc_serv *serv)
{
struct sock *sk = svsk->sk_sk;
svc_xprt_init(&svc_tcp_class, &svsk->sk_xprt, serv);
set_bit(XPT_CACHE_AUTH, &svsk->sk_xprt.xpt_flags);
if (sk->sk_state == TCP_LISTEN) {
dprintk("setting up TCP socket for listening\n");
set_bit(XPT_LISTENER, &svsk->sk_xprt.xpt_flags);
sk->sk_data_ready = svc_tcp_listen_data_ready;
set_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags);
} else {
dprintk("setting up TCP socket for reading\n");
sk->sk_state_change = svc_tcp_state_change;
sk->sk_data_ready = svc_tcp_data_ready;
sk->sk_write_space = svc_tcp_write_space;
svsk->sk_reclen = 0;
svsk->sk_tcplen = 0;
tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF;
/* initialise setting must have enough space to
* receive and respond to one request.
* svc_tcp_recvfrom will re-adjust if necessary
*/
svc_sock_setbufsize(svsk->sk_sock,
3 * svsk->sk_xprt.xpt_server->sv_max_mesg,
3 * svsk->sk_xprt.xpt_server->sv_max_mesg);
set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
if (sk->sk_state != TCP_ESTABLISHED)
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
}
}
void svc_sock_update_bufs(struct svc_serv *serv)
{
/*
* The number of server threads has changed. Update
* rcvbuf and sndbuf accordingly on all sockets
*/
struct list_head *le;
spin_lock_bh(&serv->sv_lock);
list_for_each(le, &serv->sv_permsocks) {
struct svc_sock *svsk =
list_entry(le, struct svc_sock, sk_xprt.xpt_list);
set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
}
list_for_each(le, &serv->sv_tempsocks) {
struct svc_sock *svsk =
list_entry(le, struct svc_sock, sk_xprt.xpt_list);
set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
}
spin_unlock_bh(&serv->sv_lock);
}
EXPORT_SYMBOL_GPL(svc_sock_update_bufs);
/*
* Initialize socket for RPC use and create svc_sock struct
* XXX: May want to setsockopt SO_SNDBUF and SO_RCVBUF.
*/
static struct svc_sock *svc_setup_socket(struct svc_serv *serv,
struct socket *sock,
int *errp, int flags)
{
struct svc_sock *svsk;
struct sock *inet;
int pmap_register = !(flags & SVC_SOCK_ANONYMOUS);
dprintk("svc: svc_setup_socket %p\n", sock);
if (!(svsk = kzalloc(sizeof(*svsk), GFP_KERNEL))) {
*errp = -ENOMEM;
return NULL;
}
inet = sock->sk;
/* Register socket with portmapper */
if (*errp >= 0 && pmap_register)
*errp = svc_register(serv, inet->sk_family, inet->sk_protocol,
ntohs(inet_sk(inet)->inet_sport));
if (*errp < 0) {
kfree(svsk);
return NULL;
}
inet->sk_user_data = svsk;
svsk->sk_sock = sock;
svsk->sk_sk = inet;
svsk->sk_ostate = inet->sk_state_change;
svsk->sk_odata = inet->sk_data_ready;
svsk->sk_owspace = inet->sk_write_space;
/* Initialize the socket */
if (sock->type == SOCK_DGRAM)
svc_udp_init(svsk, serv);
else
svc_tcp_init(svsk, serv);
dprintk("svc: svc_setup_socket created %p (inet %p)\n",
svsk, svsk->sk_sk);
return svsk;
}
/**
* svc_addsock - add a listener socket to an RPC service
* @serv: pointer to RPC service to which to add a new listener
* @fd: file descriptor of the new listener
* @name_return: pointer to buffer to fill in with name of listener
* @len: size of the buffer
*
* Fills in socket name and returns positive length of name if successful.
* Name is terminated with '\n'. On error, returns a negative errno
* value.
*/
int svc_addsock(struct svc_serv *serv, const int fd, char *name_return,
const size_t len)
{
int err = 0;
struct socket *so = sockfd_lookup(fd, &err);
struct svc_sock *svsk = NULL;
if (!so)
return err;
if ((so->sk->sk_family != PF_INET) && (so->sk->sk_family != PF_INET6))
err = -EAFNOSUPPORT;
else if (so->sk->sk_protocol != IPPROTO_TCP &&
so->sk->sk_protocol != IPPROTO_UDP)
err = -EPROTONOSUPPORT;
else if (so->state > SS_UNCONNECTED)
err = -EISCONN;
else {
if (!try_module_get(THIS_MODULE))
err = -ENOENT;
else
svsk = svc_setup_socket(serv, so, &err,
SVC_SOCK_DEFAULTS);
if (svsk) {
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
struct sockaddr_storage addr;
struct sockaddr *sin = (struct sockaddr *)&addr;
int salen;
if (kernel_getsockname(svsk->sk_sock, sin, &salen) == 0)
svc_xprt_set_local(&svsk->sk_xprt, sin, salen);
clear_bit(XPT_TEMP, &svsk->sk_xprt.xpt_flags);
spin_lock_bh(&serv->sv_lock);
list_add(&svsk->sk_xprt.xpt_list, &serv->sv_permsocks);
spin_unlock_bh(&serv->sv_lock);
svc_xprt_received(&svsk->sk_xprt);
err = 0;
} else
module_put(THIS_MODULE);
}
if (err) {
sockfd_put(so);
return err;
}
return svc_one_sock_name(svsk, name_return, len);
}
EXPORT_SYMBOL_GPL(svc_addsock);
/*
* Create socket for RPC service.
*/
static struct svc_xprt *svc_create_socket(struct svc_serv *serv,
int protocol,
struct sockaddr *sin, int len,
int flags)
{
struct svc_sock *svsk;
struct socket *sock;
int error;
int type;
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
struct sockaddr_storage addr;
struct sockaddr *newsin = (struct sockaddr *)&addr;
int newlen;
int family;
int val;
RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]);
dprintk("svc: svc_create_socket(%s, %d, %s)\n",
serv->sv_program->pg_name, protocol,
__svc_print_addr(sin, buf, sizeof(buf)));
if (protocol != IPPROTO_UDP && protocol != IPPROTO_TCP) {
printk(KERN_WARNING "svc: only UDP and TCP "
"sockets supported\n");
return ERR_PTR(-EINVAL);
}
type = (protocol == IPPROTO_UDP)? SOCK_DGRAM : SOCK_STREAM;
switch (sin->sa_family) {
case AF_INET6:
family = PF_INET6;
break;
case AF_INET:
family = PF_INET;
break;
default:
return ERR_PTR(-EINVAL);
}
error = sock_create_kern(family, type, protocol, &sock);
if (error < 0)
return ERR_PTR(error);
svc_reclassify_socket(sock);
/*
* If this is an PF_INET6 listener, we want to avoid
* getting requests from IPv4 remotes. Those should
* be shunted to a PF_INET listener via rpcbind.
*/
val = 1;
if (family == PF_INET6)
kernel_setsockopt(sock, SOL_IPV6, IPV6_V6ONLY,
(char *)&val, sizeof(val));
if (type == SOCK_STREAM)
sock->sk->sk_reuse = 1; /* allow address reuse */
error = kernel_bind(sock, sin, len);
if (error < 0)
goto bummer;
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
newlen = len;
error = kernel_getsockname(sock, newsin, &newlen);
if (error < 0)
goto bummer;
if (protocol == IPPROTO_TCP) {
if ((error = kernel_listen(sock, 64)) < 0)
goto bummer;
}
if ((svsk = svc_setup_socket(serv, sock, &error, flags)) != NULL) {
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
svc_xprt_set_local(&svsk->sk_xprt, newsin, newlen);
return (struct svc_xprt *)svsk;
}
bummer:
dprintk("svc: svc_create_socket error = %d\n", -error);
sock_release(sock);
return ERR_PTR(error);
}
/*
* Detach the svc_sock from the socket so that no
* more callbacks occur.
*/
static void svc_sock_detach(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
struct sock *sk = svsk->sk_sk;
dprintk("svc: svc_sock_detach(%p)\n", svsk);
/* put back the old socket callbacks */
sk->sk_state_change = svsk->sk_ostate;
sk->sk_data_ready = svsk->sk_odata;
sk->sk_write_space = svsk->sk_owspace;
if (sk_sleep(sk) && waitqueue_active(sk_sleep(sk)))
wake_up_interruptible(sk_sleep(sk));
}
/*
* Disconnect the socket, and reset the callbacks
*/
static void svc_tcp_sock_detach(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
dprintk("svc: svc_tcp_sock_detach(%p)\n", svsk);
svc_sock_detach(xprt);
if (!test_bit(XPT_LISTENER, &xprt->xpt_flags))
kernel_sock_shutdown(svsk->sk_sock, SHUT_RDWR);
}
/*
* Free the svc_sock's socket resources and the svc_sock itself.
*/
static void svc_sock_free(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
dprintk("svc: svc_sock_free(%p)\n", svsk);
if (svsk->sk_sock->file)
sockfd_put(svsk->sk_sock);
else
sock_release(svsk->sk_sock);
kfree(svsk);
}
/*
* Create a svc_xprt.
*
* For internal use only (e.g. nfsv4.1 backchannel).
* Callers should typically use the xpo_create() method.
*/
struct svc_xprt *svc_sock_create(struct svc_serv *serv, int prot)
{
struct svc_sock *svsk;
struct svc_xprt *xprt = NULL;
dprintk("svc: %s\n", __func__);
svsk = kzalloc(sizeof(*svsk), GFP_KERNEL);
if (!svsk)
goto out;
xprt = &svsk->sk_xprt;
if (prot == IPPROTO_TCP)
svc_xprt_init(&svc_tcp_class, xprt, serv);
else if (prot == IPPROTO_UDP)
svc_xprt_init(&svc_udp_class, xprt, serv);
else
BUG();
out:
dprintk("svc: %s return %p\n", __func__, xprt);
return xprt;
}
EXPORT_SYMBOL_GPL(svc_sock_create);
/*
* Destroy a svc_sock.
*/
void svc_sock_destroy(struct svc_xprt *xprt)
{
if (xprt)
kfree(container_of(xprt, struct svc_sock, sk_xprt));
}
EXPORT_SYMBOL_GPL(svc_sock_destroy);