2005-04-17 02:20:36 +04:00
|
|
|
/* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
|
|
|
|
*/
|
2006-01-02 12:14:23 +03:00
|
|
|
/*
|
2005-06-23 16:46:46 +04:00
|
|
|
*
|
2005-04-17 02:20:36 +04:00
|
|
|
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
|
|
|
|
* All Rights Reserved.
|
2005-06-23 16:46:46 +04:00
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the
|
|
|
|
* "Software"), to deal in the Software without restriction, including
|
|
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
|
|
* the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice (including the
|
|
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
|
|
* of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
|
|
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
|
|
|
|
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
|
|
|
|
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
|
|
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
2006-01-02 12:14:23 +03:00
|
|
|
*/
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2009-02-18 02:13:31 +03:00
|
|
|
#include <linux/device.h>
|
2012-10-02 21:01:07 +04:00
|
|
|
#include <drm/drmP.h>
|
|
|
|
#include <drm/i915_drm.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
#include "i915_drv.h"
|
2012-07-02 18:51:02 +04:00
|
|
|
#include "i915_trace.h"
|
2010-09-11 12:19:14 +04:00
|
|
|
#include "intel_drv.h"
|
2005-04-17 02:20:36 +04:00
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
#include <linux/console.h>
|
2011-08-30 19:04:30 +04:00
|
|
|
#include <linux/module.h>
|
2012-10-02 21:01:07 +04:00
|
|
|
#include <drm/drm_crtc_helper.h>
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
|
2009-01-05 00:55:33 +03:00
|
|
|
static struct drm_driver driver;
|
|
|
|
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
#define GEN_DEFAULT_PIPEOFFSETS \
|
|
|
|
.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
|
|
|
|
PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \
|
|
|
|
.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
|
|
|
|
TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }, \
|
|
|
|
.dpll_offsets = { DPLL_A_OFFSET, DPLL_B_OFFSET }, \
|
|
|
|
.dpll_md_offsets = { DPLL_A_MD_OFFSET, DPLL_B_MD_OFFSET }, \
|
|
|
|
.palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET }
|
|
|
|
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_i830_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_845g_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 2, .num_pipes = 1,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_i85x_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 2, .is_i85x = 1, .is_mobile = 1, .num_pipes = 2,
|
2010-04-15 22:03:30 +04:00
|
|
|
.cursor_needs_physical = 1,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
2013-11-28 19:30:02 +04:00
|
|
|
.has_fbc = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_i865g_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 2, .num_pipes = 1,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_i915g_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_i915gm_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 3, .is_mobile = 1, .num_pipes = 2,
|
2009-12-16 23:16:17 +03:00
|
|
|
.cursor_needs_physical = 1,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
2010-09-17 03:32:17 +04:00
|
|
|
.supports_tv = 1,
|
2013-11-28 19:30:02 +04:00
|
|
|
.has_fbc = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_i945g_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_i945gm_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2,
|
2009-12-16 23:16:17 +03:00
|
|
|
.has_hotplug = 1, .cursor_needs_physical = 1,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
2010-09-17 03:32:17 +04:00
|
|
|
.supports_tv = 1,
|
2013-11-28 19:30:02 +04:00
|
|
|
.has_fbc = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_i965g_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 4, .is_broadwater = 1, .num_pipes = 2,
|
2010-08-11 12:59:24 +04:00
|
|
|
.has_hotplug = 1,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_i965gm_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 4, .is_crestline = 1, .num_pipes = 2,
|
2010-12-05 19:49:51 +03:00
|
|
|
.is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1,
|
2010-09-17 03:32:17 +04:00
|
|
|
.supports_tv = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_g33_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 3, .is_g33 = 1, .num_pipes = 2,
|
2010-08-11 12:59:24 +04:00
|
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_g45_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2,
|
2010-08-11 12:59:24 +04:00
|
|
|
.has_pipe_cxsr = 1, .has_hotplug = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING | BSD_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_gm45_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 4, .is_g4x = 1, .num_pipes = 2,
|
2010-12-05 19:49:51 +03:00
|
|
|
.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
|
2010-08-11 12:59:24 +04:00
|
|
|
.has_pipe_cxsr = 1, .has_hotplug = 1,
|
2010-09-17 03:32:17 +04:00
|
|
|
.supports_tv = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING | BSD_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_pineview_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2,
|
2010-08-11 12:59:24 +04:00
|
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
2010-08-12 12:42:51 +04:00
|
|
|
.has_overlay = 1,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_ironlake_d_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 5, .num_pipes = 2,
|
2012-01-05 15:34:29 +04:00
|
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING | BSD_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_ironlake_m_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 5, .is_mobile = 1, .num_pipes = 2,
|
2010-12-05 19:49:51 +03:00
|
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
2011-05-06 02:24:21 +04:00
|
|
|
.has_fbc = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING | BSD_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-12-16 23:16:16 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_sandybridge_d_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 6, .num_pipes = 2,
|
2010-08-11 12:59:24 +04:00
|
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
2013-11-07 01:02:24 +04:00
|
|
|
.has_fbc = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING | BSD_RING | BLT_RING,
|
2012-01-17 20:43:53 +04:00
|
|
|
.has_llc = 1,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2009-11-02 23:08:22 +03:00
|
|
|
};
|
|
|
|
|
2010-05-20 12:33:46 +04:00
|
|
|
static const struct intel_device_info intel_sandybridge_m_info = {
|
2013-03-14 01:05:41 +04:00
|
|
|
.gen = 6, .is_mobile = 1, .num_pipes = 2,
|
2010-08-11 12:59:24 +04:00
|
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
2010-12-15 10:42:32 +03:00
|
|
|
.has_fbc = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING | BSD_RING | BLT_RING,
|
2012-01-17 20:43:53 +04:00
|
|
|
.has_llc = 1,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2010-01-08 02:08:18 +03:00
|
|
|
};
|
|
|
|
|
2013-03-15 22:17:54 +04:00
|
|
|
#define GEN7_FEATURES \
|
|
|
|
.gen = 7, .num_pipes = 3, \
|
|
|
|
.need_gfx_hws = 1, .has_hotplug = 1, \
|
2013-11-07 01:02:24 +04:00
|
|
|
.has_fbc = 1, \
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
|
2013-10-06 04:57:11 +04:00
|
|
|
.has_llc = 1
|
2013-03-15 22:17:54 +04:00
|
|
|
|
2011-04-29 01:32:07 +04:00
|
|
|
static const struct intel_device_info intel_ivybridge_d_info = {
|
2013-03-15 22:17:54 +04:00
|
|
|
GEN7_FEATURES,
|
|
|
|
.is_ivybridge = 1,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2011-04-29 01:32:07 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct intel_device_info intel_ivybridge_m_info = {
|
2013-03-15 22:17:54 +04:00
|
|
|
GEN7_FEATURES,
|
|
|
|
.is_ivybridge = 1,
|
|
|
|
.is_mobile = 1,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2011-04-29 01:32:07 +04:00
|
|
|
};
|
|
|
|
|
2013-04-06 00:12:45 +04:00
|
|
|
static const struct intel_device_info intel_ivybridge_q_info = {
|
|
|
|
GEN7_FEATURES,
|
|
|
|
.is_ivybridge = 1,
|
|
|
|
.num_pipes = 0, /* legal, last one wins */
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2013-04-06 00:12:45 +04:00
|
|
|
};
|
|
|
|
|
2012-03-29 00:39:21 +04:00
|
|
|
static const struct intel_device_info intel_valleyview_m_info = {
|
2013-03-15 22:17:54 +04:00
|
|
|
GEN7_FEATURES,
|
|
|
|
.is_mobile = 1,
|
|
|
|
.num_pipes = 2,
|
2012-03-29 00:39:21 +04:00
|
|
|
.is_valleyview = 1,
|
2013-01-24 17:29:56 +04:00
|
|
|
.display_mmio_offset = VLV_DISPLAY_BASE,
|
2013-11-07 01:02:24 +04:00
|
|
|
.has_fbc = 0, /* legal, last one wins */
|
2013-04-16 08:48:03 +04:00
|
|
|
.has_llc = 0, /* legal, last one wins */
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2012-03-29 00:39:21 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct intel_device_info intel_valleyview_d_info = {
|
2013-03-15 22:17:54 +04:00
|
|
|
GEN7_FEATURES,
|
|
|
|
.num_pipes = 2,
|
2012-03-29 00:39:21 +04:00
|
|
|
.is_valleyview = 1,
|
2013-01-24 17:29:56 +04:00
|
|
|
.display_mmio_offset = VLV_DISPLAY_BASE,
|
2013-11-07 01:02:24 +04:00
|
|
|
.has_fbc = 0, /* legal, last one wins */
|
2013-04-16 08:48:03 +04:00
|
|
|
.has_llc = 0, /* legal, last one wins */
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2012-03-29 00:39:21 +04:00
|
|
|
};
|
|
|
|
|
2012-03-29 19:32:18 +04:00
|
|
|
static const struct intel_device_info intel_haswell_d_info = {
|
2013-03-15 22:17:54 +04:00
|
|
|
GEN7_FEATURES,
|
|
|
|
.is_haswell = 1,
|
2013-04-22 21:40:39 +04:00
|
|
|
.has_ddi = 1,
|
2013-04-22 21:40:41 +04:00
|
|
|
.has_fpga_dbg = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2012-03-29 19:32:18 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct intel_device_info intel_haswell_m_info = {
|
2013-03-15 22:17:54 +04:00
|
|
|
GEN7_FEATURES,
|
|
|
|
.is_haswell = 1,
|
|
|
|
.is_mobile = 1,
|
2013-04-22 21:40:39 +04:00
|
|
|
.has_ddi = 1,
|
2013-04-22 21:40:41 +04:00
|
|
|
.has_fpga_dbg = 1,
|
2013-10-15 21:02:57 +04:00
|
|
|
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2011-04-29 01:32:07 +04:00
|
|
|
};
|
|
|
|
|
2013-11-04 04:47:33 +04:00
|
|
|
static const struct intel_device_info intel_broadwell_d_info = {
|
2013-11-03 08:07:32 +04:00
|
|
|
.gen = 8, .num_pipes = 3,
|
2013-11-04 04:47:33 +04:00
|
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
|
|
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
|
|
|
|
.has_llc = 1,
|
|
|
|
.has_ddi = 1,
|
2014-02-21 04:01:20 +04:00
|
|
|
.has_fbc = 1,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2013-11-04 04:47:33 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct intel_device_info intel_broadwell_m_info = {
|
2013-11-03 08:07:32 +04:00
|
|
|
.gen = 8, .is_mobile = 1, .num_pipes = 3,
|
2013-11-04 04:47:33 +04:00
|
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
|
|
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
|
|
|
|
.has_llc = 1,
|
|
|
|
.has_ddi = 1,
|
2014-02-21 04:01:20 +04:00
|
|
|
.has_fbc = 1,
|
drm/i915: Reorganize display pipe register accesses
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-04 16:22:24 +04:00
|
|
|
GEN_DEFAULT_PIPEOFFSETS,
|
2013-11-04 04:47:33 +04:00
|
|
|
};
|
|
|
|
|
2013-07-27 00:32:51 +04:00
|
|
|
/*
|
|
|
|
* Make sure any device matches here are from most specific to most
|
|
|
|
* general. For example, since the Quanta match is based on the subsystem
|
|
|
|
* and subvendor IDs, we need it to come before the more general IVB
|
|
|
|
* PCI ID matches, otherwise we'll use the wrong info struct above.
|
|
|
|
*/
|
|
|
|
#define INTEL_PCI_IDS \
|
|
|
|
INTEL_I830_IDS(&intel_i830_info), \
|
|
|
|
INTEL_I845G_IDS(&intel_845g_info), \
|
|
|
|
INTEL_I85X_IDS(&intel_i85x_info), \
|
|
|
|
INTEL_I865G_IDS(&intel_i865g_info), \
|
|
|
|
INTEL_I915G_IDS(&intel_i915g_info), \
|
|
|
|
INTEL_I915GM_IDS(&intel_i915gm_info), \
|
|
|
|
INTEL_I945G_IDS(&intel_i945g_info), \
|
|
|
|
INTEL_I945GM_IDS(&intel_i945gm_info), \
|
|
|
|
INTEL_I965G_IDS(&intel_i965g_info), \
|
|
|
|
INTEL_G33_IDS(&intel_g33_info), \
|
|
|
|
INTEL_I965GM_IDS(&intel_i965gm_info), \
|
|
|
|
INTEL_GM45_IDS(&intel_gm45_info), \
|
|
|
|
INTEL_G45_IDS(&intel_g45_info), \
|
|
|
|
INTEL_PINEVIEW_IDS(&intel_pineview_info), \
|
|
|
|
INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info), \
|
|
|
|
INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info), \
|
|
|
|
INTEL_SNB_D_IDS(&intel_sandybridge_d_info), \
|
|
|
|
INTEL_SNB_M_IDS(&intel_sandybridge_m_info), \
|
|
|
|
INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */ \
|
|
|
|
INTEL_IVB_M_IDS(&intel_ivybridge_m_info), \
|
|
|
|
INTEL_IVB_D_IDS(&intel_ivybridge_d_info), \
|
|
|
|
INTEL_HSW_D_IDS(&intel_haswell_d_info), \
|
|
|
|
INTEL_HSW_M_IDS(&intel_haswell_m_info), \
|
|
|
|
INTEL_VLV_M_IDS(&intel_valleyview_m_info), \
|
2013-11-04 04:47:33 +04:00
|
|
|
INTEL_VLV_D_IDS(&intel_valleyview_d_info), \
|
|
|
|
INTEL_BDW_M_IDS(&intel_broadwell_m_info), \
|
|
|
|
INTEL_BDW_D_IDS(&intel_broadwell_d_info)
|
2013-07-27 00:32:51 +04:00
|
|
|
|
2010-07-05 21:01:47 +04:00
|
|
|
static const struct pci_device_id pciidlist[] = { /* aka */
|
2013-07-27 00:32:51 +04:00
|
|
|
INTEL_PCI_IDS,
|
2009-12-16 23:16:15 +03:00
|
|
|
{0, 0, 0}
|
2005-04-17 02:20:36 +04:00
|
|
|
};
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
#if defined(CONFIG_DRM_I915_KMS)
|
|
|
|
MODULE_DEVICE_TABLE(pci, pciidlist);
|
|
|
|
#endif
|
|
|
|
|
2011-08-16 23:34:10 +04:00
|
|
|
void intel_detect_pch(struct drm_device *dev)
|
2010-04-07 12:15:53 +04:00
|
|
|
{
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
struct pci_dev *pch;
|
|
|
|
|
2013-04-06 00:12:44 +04:00
|
|
|
/* In all current cases, num_pipes is equivalent to the PCH_NOP setting
|
|
|
|
* (which really amounts to a PCH but no South Display).
|
|
|
|
*/
|
|
|
|
if (INTEL_INFO(dev)->num_pipes == 0) {
|
|
|
|
dev_priv->pch_type = PCH_NOP;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2010-04-07 12:15:53 +04:00
|
|
|
/*
|
|
|
|
* The reason to probe ISA bridge instead of Dev31:Fun0 is to
|
|
|
|
* make graphics device passthrough work easy for VMM, that only
|
|
|
|
* need to expose ISA bridge to let driver know the real hardware
|
|
|
|
* underneath. This is a requirement from virtualization team.
|
2013-06-19 17:10:23 +04:00
|
|
|
*
|
|
|
|
* In some virtualized environments (e.g. XEN), there is irrelevant
|
|
|
|
* ISA bridge in the system. To work reliably, we should scan trhough
|
|
|
|
* all the ISA bridge devices and check for the first match, instead
|
|
|
|
* of only checking the first one.
|
2010-04-07 12:15:53 +04:00
|
|
|
*/
|
|
|
|
pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
|
2013-06-19 17:10:23 +04:00
|
|
|
while (pch) {
|
|
|
|
struct pci_dev *curr = pch;
|
2010-04-07 12:15:53 +04:00
|
|
|
if (pch->vendor == PCI_VENDOR_ID_INTEL) {
|
2012-11-20 21:12:07 +04:00
|
|
|
unsigned short id;
|
2010-04-07 12:15:53 +04:00
|
|
|
id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
|
2012-11-20 21:12:07 +04:00
|
|
|
dev_priv->pch_id = id;
|
2010-04-07 12:15:53 +04:00
|
|
|
|
2011-04-29 01:48:02 +04:00
|
|
|
if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
|
|
|
|
dev_priv->pch_type = PCH_IBX;
|
|
|
|
DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
|
2012-11-01 01:52:27 +04:00
|
|
|
WARN_ON(!IS_GEN5(dev));
|
2011-04-29 01:48:02 +04:00
|
|
|
} else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
|
2010-04-07 12:15:53 +04:00
|
|
|
dev_priv->pch_type = PCH_CPT;
|
|
|
|
DRM_DEBUG_KMS("Found CougarPoint PCH\n");
|
2012-11-01 01:52:27 +04:00
|
|
|
WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
|
2011-04-07 23:33:56 +04:00
|
|
|
} else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
|
|
|
|
/* PantherPoint is CPT compatible */
|
|
|
|
dev_priv->pch_type = PCH_CPT;
|
2013-10-01 13:12:33 +04:00
|
|
|
DRM_DEBUG_KMS("Found PantherPoint PCH\n");
|
2012-11-01 01:52:27 +04:00
|
|
|
WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
|
2012-03-29 19:32:20 +04:00
|
|
|
} else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
|
|
|
|
dev_priv->pch_type = PCH_LPT;
|
|
|
|
DRM_DEBUG_KMS("Found LynxPoint PCH\n");
|
2012-11-01 01:52:27 +04:00
|
|
|
WARN_ON(!IS_HASWELL(dev));
|
2013-04-13 01:16:54 +04:00
|
|
|
WARN_ON(IS_ULT(dev));
|
2013-11-03 08:07:35 +04:00
|
|
|
} else if (IS_BROADWELL(dev)) {
|
|
|
|
dev_priv->pch_type = PCH_LPT;
|
|
|
|
dev_priv->pch_id =
|
|
|
|
INTEL_PCH_LPT_LP_DEVICE_ID_TYPE;
|
|
|
|
DRM_DEBUG_KMS("This is Broadwell, assuming "
|
|
|
|
"LynxPoint LP PCH\n");
|
2013-11-08 09:40:41 +04:00
|
|
|
} else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
|
|
|
|
dev_priv->pch_type = PCH_LPT;
|
|
|
|
DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
|
|
|
|
WARN_ON(!IS_HASWELL(dev));
|
|
|
|
WARN_ON(!IS_ULT(dev));
|
2013-06-19 17:10:23 +04:00
|
|
|
} else {
|
|
|
|
goto check_next;
|
2010-04-07 12:15:53 +04:00
|
|
|
}
|
2013-06-19 17:10:23 +04:00
|
|
|
pci_dev_put(pch);
|
|
|
|
break;
|
2010-04-07 12:15:53 +04:00
|
|
|
}
|
2013-06-19 17:10:23 +04:00
|
|
|
check_next:
|
|
|
|
pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, curr);
|
|
|
|
pci_dev_put(curr);
|
2010-04-07 12:15:53 +04:00
|
|
|
}
|
2013-06-19 17:10:23 +04:00
|
|
|
if (!pch)
|
|
|
|
DRM_DEBUG_KMS("No PCH found?\n");
|
2010-04-07 12:15:53 +04:00
|
|
|
}
|
|
|
|
|
2012-04-06 01:47:36 +04:00
|
|
|
bool i915_semaphore_is_enabled(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
if (INTEL_INFO(dev)->gen < 6)
|
2013-12-17 12:56:53 +04:00
|
|
|
return false;
|
2012-04-06 01:47:36 +04:00
|
|
|
|
2013-11-05 07:45:44 +04:00
|
|
|
/* Until we get further testing... */
|
|
|
|
if (IS_GEN8(dev)) {
|
2014-01-21 13:24:25 +04:00
|
|
|
WARN_ON(!i915.preliminary_hw_support);
|
2013-12-17 12:56:53 +04:00
|
|
|
return false;
|
2013-11-05 07:45:44 +04:00
|
|
|
}
|
|
|
|
|
2014-01-21 13:24:25 +04:00
|
|
|
if (i915.semaphores >= 0)
|
|
|
|
return i915.semaphores;
|
2012-04-06 01:47:36 +04:00
|
|
|
|
2012-04-02 22:48:43 +04:00
|
|
|
#ifdef CONFIG_INTEL_IOMMU
|
2012-04-06 01:47:36 +04:00
|
|
|
/* Enable semaphores on SNB when IO remapping is off */
|
2012-04-02 22:48:43 +04:00
|
|
|
if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
|
|
|
|
return false;
|
|
|
|
#endif
|
2012-04-06 01:47:36 +04:00
|
|
|
|
2013-12-17 12:56:53 +04:00
|
|
|
return true;
|
2012-04-06 01:47:36 +04:00
|
|
|
}
|
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
static int i915_drm_freeze(struct drm_device *dev)
|
2007-11-22 07:14:14 +03:00
|
|
|
{
|
2010-02-19 01:06:27 +03:00
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
2013-03-26 20:25:45 +04:00
|
|
|
struct drm_crtc *crtc;
|
2010-02-19 01:06:27 +03:00
|
|
|
|
2013-12-07 02:32:13 +04:00
|
|
|
intel_runtime_pm_get(dev_priv);
|
|
|
|
|
i915: ignore lid open event when resuming
i915 driver needs to do modeset when
1. system resumes from sleep
2. lid is opened
In PM_SUSPEND_MEM state, all the GPEs are cleared when system resumes,
thus it is the i915_resume code does the modeset rather than intel_lid_notify().
But in PM_SUSPEND_FREEZE state, this will be broken because
system is still responsive to the lid events.
1. When we close the lid in Freeze state, intel_lid_notify() sets modeset_on_lid.
2. When we reopen the lid, intel_lid_notify() will do a modeset,
before the system is resumed.
here is the error log,
[92146.548074] WARNING: at drivers/gpu/drm/i915/intel_display.c:1028 intel_wait_for_pipe_off+0x184/0x190 [i915]()
[92146.548076] Hardware name: VGN-Z540N
[92146.548078] pipe_off wait timed out
[92146.548167] Modules linked in: hid_generic usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec parport_pc snd_hwdep ppdev snd_pcm_oss i915 snd_mixer_oss snd_pcm arc4 iwldvm snd_seq_dummy mac80211 snd_seq_oss snd_seq_midi fbcon tileblit font bitblit softcursor drm_kms_helper snd_rawmidi snd_seq_midi_event coretemp drm snd_seq kvm btusb bluetooth snd_timer iwlwifi pcmcia tpm_infineon i2c_algo_bit joydev snd_seq_device intel_agp cfg80211 snd intel_gtt yenta_socket pcmcia_rsrc sony_laptop agpgart microcode psmouse tpm_tis serio_raw mxm_wmi soundcore snd_page_alloc tpm acpi_cpufreq lpc_ich pcmcia_core tpm_bios mperf processor lp parport firewire_ohci firewire_core crc_itu_t sdhci_pci sdhci thermal e1000e
[92146.548173] Pid: 4304, comm: kworker/0:0 Tainted: G W 3.8.0-rc3-s0i3-v3-test+ #9
[92146.548175] Call Trace:
[92146.548189] [<c10378e2>] warn_slowpath_common+0x72/0xa0
[92146.548227] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548263] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548270] [<c10379b3>] warn_slowpath_fmt+0x33/0x40
[92146.548307] [<f86398b4>] intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548344] [<f86399c2>] intel_disable_pipe+0x102/0x190 [i915]
[92146.548380] [<f8639ea4>] ? intel_disable_plane+0x64/0x80 [i915]
[92146.548417] [<f8639f7c>] i9xx_crtc_disable+0xbc/0x150 [i915]
[92146.548456] [<f863ebee>] intel_crtc_update_dpms+0x5e/0x90 [i915]
[92146.548493] [<f86437cf>] intel_modeset_setup_hw_state+0x42f/0x8f0 [i915]
[92146.548535] [<f8645b0b>] intel_lid_notify+0x9b/0xc0 [i915]
[92146.548543] [<c15610d3>] notifier_call_chain+0x43/0x60
[92146.548550] [<c105d1e1>] __blocking_notifier_call_chain+0x41/0x80
[92146.548556] [<c105d23f>] blocking_notifier_call_chain+0x1f/0x30
[92146.548563] [<c131a684>] acpi_lid_send_state+0x78/0xa4
[92146.548569] [<c131aa9e>] acpi_button_notify+0x3b/0xf1
[92146.548577] [<c12df56a>] ? acpi_os_execute+0x17/0x19
[92146.548582] [<c12e591a>] ? acpi_ec_sync_query+0xa5/0xbc
[92146.548589] [<c12e2b82>] acpi_device_notify+0x16/0x18
[92146.548595] [<c12f4904>] acpi_ev_notify_dispatch+0x38/0x4f
[92146.548600] [<c12df0e8>] acpi_os_execute_deferred+0x20/0x2b
[92146.548607] [<c1051208>] process_one_work+0x128/0x3f0
[92146.548613] [<c1564f73>] ? common_interrupt+0x33/0x38
[92146.548618] [<c104f8c0>] ? wake_up_worker+0x30/0x30
[92146.548624] [<c12df0c8>] ? acpi_os_wait_events_complete+0x1e/0x1e
[92146.548629] [<c10524f9>] worker_thread+0x119/0x3b0
[92146.548634] [<c10523e0>] ? manage_workers+0x240/0x240
[92146.548640] [<c1056e84>] kthread+0x94/0xa0
[92146.548647] [<c1060000>] ? ftrace_raw_output_sched_stat_runtime+0x70/0xf0
[92146.548652] [<c15649b7>] ret_from_kernel_thread+0x1b/0x28
[92146.548658] [<c1056df0>] ? kthread_create_on_node+0xc0/0xc0
three different modeset flags are introduced in this patch
MODESET_ON_LID_OPEN: do modeset on next lid open event
MODESET_DONE: modeset already done
MODESET_SUSPENDED: suspended, only do modeset when system is resumed
In this way,
1. when lid is closed, MODESET_ON_LID_OPEN is set so that
we'll do modeset on next lid open event.
2. when lid is opened, MODESET_DONE is set
so that duplicate lid open events will be ignored.
3. when system suspends, MODESET_SUSPENDED is set.
In this case, we will not do modeset on any lid events.
Plus, locking mechanism is also introduced to avoid racing.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-05 11:41:53 +04:00
|
|
|
/* ignore lid events during suspend */
|
|
|
|
mutex_lock(&dev_priv->modeset_restore_lock);
|
|
|
|
dev_priv->modeset_restore = MODESET_SUSPENDED;
|
|
|
|
mutex_unlock(&dev_priv->modeset_restore_lock);
|
|
|
|
|
2013-08-19 20:18:09 +04:00
|
|
|
/* We do a lot of poking in a lot of registers, make sure they work
|
|
|
|
* properly. */
|
|
|
|
hsw_disable_package_c8(dev_priv);
|
2014-02-18 02:02:02 +04:00
|
|
|
intel_display_set_init_power(dev_priv, true);
|
2013-01-25 22:59:15 +04:00
|
|
|
|
2010-12-07 02:20:40 +03:00
|
|
|
drm_kms_helper_poll_disable(dev);
|
|
|
|
|
2007-11-22 07:14:14 +03:00
|
|
|
pci_save_state(dev->pdev);
|
|
|
|
|
2009-02-18 02:13:31 +03:00
|
|
|
/* If KMS is active, we do the leavevt stuff here */
|
2009-02-24 02:41:09 +03:00
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
|
2013-07-09 18:51:37 +04:00
|
|
|
int error;
|
|
|
|
|
2013-10-16 14:50:01 +04:00
|
|
|
error = i915_gem_suspend(dev);
|
2010-02-07 23:48:24 +03:00
|
|
|
if (error) {
|
2009-02-24 02:41:09 +03:00
|
|
|
dev_err(&dev->pdev->dev,
|
2010-02-07 23:48:24 +03:00
|
|
|
"GEM idle failed, resume might fail\n");
|
|
|
|
return error;
|
|
|
|
}
|
2012-07-26 21:21:47 +04:00
|
|
|
|
2012-11-02 22:14:00 +04:00
|
|
|
cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
|
|
|
|
|
2009-02-24 02:41:09 +03:00
|
|
|
drm_irq_uninstall(dev);
|
2013-03-05 12:50:58 +04:00
|
|
|
dev_priv->enable_hotplug_processing = false;
|
2013-03-26 20:25:45 +04:00
|
|
|
/*
|
|
|
|
* Disable CRTCs directly since we want to preserve sw state
|
|
|
|
* for _thaw.
|
|
|
|
*/
|
2013-11-26 21:13:41 +04:00
|
|
|
mutex_lock(&dev->mode_config.mutex);
|
2013-03-26 20:25:45 +04:00
|
|
|
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
|
|
|
|
dev_priv->display.crtc_disable(crtc);
|
2013-11-26 21:13:41 +04:00
|
|
|
mutex_unlock(&dev->mode_config.mutex);
|
2013-04-17 15:04:50 +04:00
|
|
|
|
|
|
|
intel_modeset_suspend_hw(dev);
|
2009-02-18 02:13:31 +03:00
|
|
|
}
|
|
|
|
|
2013-10-16 20:21:30 +04:00
|
|
|
i915_gem_suspend_gtt_mappings(dev);
|
|
|
|
|
2009-06-23 05:05:12 +04:00
|
|
|
i915_save_state(dev);
|
|
|
|
|
2010-08-19 19:09:23 +04:00
|
|
|
intel_opregion_fini(dev);
|
2008-08-05 22:37:25 +04:00
|
|
|
|
2012-03-28 13:48:49 +04:00
|
|
|
console_lock();
|
2013-06-10 18:48:09 +04:00
|
|
|
intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED);
|
2012-03-28 13:48:49 +04:00
|
|
|
console_unlock();
|
|
|
|
|
2010-02-19 01:06:27 +03:00
|
|
|
return 0;
|
2010-02-07 23:48:24 +03:00
|
|
|
}
|
|
|
|
|
2010-02-01 08:38:10 +03:00
|
|
|
int i915_suspend(struct drm_device *dev, pm_message_t state)
|
2010-02-07 23:48:24 +03:00
|
|
|
{
|
|
|
|
int error;
|
|
|
|
|
|
|
|
if (!dev || !dev->dev_private) {
|
|
|
|
DRM_ERROR("dev: %p\n", dev);
|
|
|
|
DRM_ERROR("DRM not initialized, aborting suspend.\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (state.event == PM_EVENT_PRETHAW)
|
|
|
|
return 0;
|
|
|
|
|
2010-12-07 02:20:40 +03:00
|
|
|
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
|
|
return 0;
|
2010-09-08 12:45:11 +04:00
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
error = i915_drm_freeze(dev);
|
|
|
|
if (error)
|
|
|
|
return error;
|
|
|
|
|
2008-02-20 03:02:20 +03:00
|
|
|
if (state.event == PM_EVENT_SUSPEND) {
|
|
|
|
/* Shut down the device */
|
|
|
|
pci_disable_device(dev->pdev);
|
|
|
|
pci_set_power_state(dev->pdev, PCI_D3hot);
|
|
|
|
}
|
2007-11-22 07:14:14 +03:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-11-02 22:13:59 +04:00
|
|
|
void intel_console_resume(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct drm_i915_private *dev_priv =
|
|
|
|
container_of(work, struct drm_i915_private,
|
|
|
|
console_resume_work);
|
|
|
|
struct drm_device *dev = dev_priv->dev;
|
|
|
|
|
|
|
|
console_lock();
|
2013-06-10 18:48:09 +04:00
|
|
|
intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
|
2012-11-02 22:13:59 +04:00
|
|
|
console_unlock();
|
|
|
|
}
|
|
|
|
|
2013-03-26 20:25:46 +04:00
|
|
|
static void intel_resume_hotplug(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
|
|
struct intel_encoder *encoder;
|
|
|
|
|
|
|
|
mutex_lock(&mode_config->mutex);
|
|
|
|
DRM_DEBUG_KMS("running encoder hotplug functions\n");
|
|
|
|
|
|
|
|
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
|
|
|
|
if (encoder->hot_plug)
|
|
|
|
encoder->hot_plug(encoder);
|
|
|
|
|
|
|
|
mutex_unlock(&mode_config->mutex);
|
|
|
|
|
|
|
|
/* Just fire off a uevent and let userspace tell us what to do */
|
|
|
|
drm_helper_hpd_irq_event(dev);
|
|
|
|
}
|
|
|
|
|
2013-09-13 01:06:43 +04:00
|
|
|
static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
|
2007-11-22 07:14:14 +03:00
|
|
|
{
|
2009-02-18 02:13:31 +03:00
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
2010-02-07 23:48:24 +03:00
|
|
|
int error = 0;
|
2008-08-05 22:37:25 +04:00
|
|
|
|
2013-09-16 18:38:36 +04:00
|
|
|
intel_uncore_early_sanitize(dev);
|
|
|
|
|
2013-09-13 01:06:43 +04:00
|
|
|
intel_uncore_sanitize(dev);
|
|
|
|
|
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET) &&
|
|
|
|
restore_gtt_mappings) {
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
|
|
i915_gem_restore_gtt_mappings(dev);
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
}
|
|
|
|
|
2014-02-18 02:02:02 +04:00
|
|
|
intel_power_domains_init_hw(dev_priv);
|
2013-09-16 18:38:35 +04:00
|
|
|
|
2010-02-19 01:06:27 +03:00
|
|
|
i915_restore_state(dev);
|
2010-08-19 19:09:23 +04:00
|
|
|
intel_opregion_setup(dev);
|
2010-02-19 01:06:27 +03:00
|
|
|
|
2009-02-18 02:13:31 +03:00
|
|
|
/* KMS EnterVT equivalent */
|
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
|
2012-12-01 18:04:25 +04:00
|
|
|
intel_init_pch_refclk(dev);
|
2014-01-17 01:28:44 +04:00
|
|
|
drm_mode_config_reset(dev);
|
2012-05-09 14:56:28 +04:00
|
|
|
|
2009-02-18 02:13:31 +03:00
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
|
|
|
2012-02-02 12:58:12 +04:00
|
|
|
error = i915_gem_init_hw(dev);
|
2009-02-18 02:13:31 +03:00
|
|
|
mutex_unlock(&dev->struct_mutex);
|
2009-02-24 02:41:09 +03:00
|
|
|
|
2013-03-05 12:50:58 +04:00
|
|
|
/* We need working interrupts for modeset enabling ... */
|
|
|
|
drm_irq_install(dev);
|
|
|
|
|
2012-05-09 14:56:28 +04:00
|
|
|
intel_modeset_init_hw(dev);
|
2013-03-26 20:25:45 +04:00
|
|
|
|
|
|
|
drm_modeset_lock_all(dev);
|
|
|
|
intel_modeset_setup_hw_state(dev, true);
|
|
|
|
drm_modeset_unlock_all(dev);
|
2013-03-05 12:50:58 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* ... but also need to make sure that hotplug processing
|
|
|
|
* doesn't cause havoc. Like in the driver load code we don't
|
|
|
|
* bother with the tiny race here where we might loose hotplug
|
|
|
|
* notifications.
|
|
|
|
* */
|
2012-12-11 17:05:07 +04:00
|
|
|
intel_hpd_init(dev);
|
2013-03-05 12:50:58 +04:00
|
|
|
dev_priv->enable_hotplug_processing = true;
|
2013-03-26 20:25:46 +04:00
|
|
|
/* Config may have changed between suspend and resume */
|
|
|
|
intel_resume_hotplug(dev);
|
2011-01-05 23:01:26 +03:00
|
|
|
}
|
2011-01-05 23:01:25 +03:00
|
|
|
|
2010-08-19 19:09:23 +04:00
|
|
|
intel_opregion_init(dev);
|
|
|
|
|
2012-11-02 22:13:59 +04:00
|
|
|
/*
|
|
|
|
* The console lock can be pretty contented on resume due
|
|
|
|
* to all the printk activity. Try to keep it out of the hot
|
|
|
|
* path of resume if possible.
|
|
|
|
*/
|
|
|
|
if (console_trylock()) {
|
2013-06-10 18:48:09 +04:00
|
|
|
intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
|
2012-11-02 22:13:59 +04:00
|
|
|
console_unlock();
|
|
|
|
} else {
|
|
|
|
schedule_work(&dev_priv->console_resume_work);
|
|
|
|
}
|
|
|
|
|
2013-08-19 20:18:09 +04:00
|
|
|
/* Undo what we did at i915_drm_freeze so the refcount goes back to the
|
|
|
|
* expected level. */
|
|
|
|
hsw_enable_package_c8(dev_priv);
|
|
|
|
|
i915: ignore lid open event when resuming
i915 driver needs to do modeset when
1. system resumes from sleep
2. lid is opened
In PM_SUSPEND_MEM state, all the GPEs are cleared when system resumes,
thus it is the i915_resume code does the modeset rather than intel_lid_notify().
But in PM_SUSPEND_FREEZE state, this will be broken because
system is still responsive to the lid events.
1. When we close the lid in Freeze state, intel_lid_notify() sets modeset_on_lid.
2. When we reopen the lid, intel_lid_notify() will do a modeset,
before the system is resumed.
here is the error log,
[92146.548074] WARNING: at drivers/gpu/drm/i915/intel_display.c:1028 intel_wait_for_pipe_off+0x184/0x190 [i915]()
[92146.548076] Hardware name: VGN-Z540N
[92146.548078] pipe_off wait timed out
[92146.548167] Modules linked in: hid_generic usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec parport_pc snd_hwdep ppdev snd_pcm_oss i915 snd_mixer_oss snd_pcm arc4 iwldvm snd_seq_dummy mac80211 snd_seq_oss snd_seq_midi fbcon tileblit font bitblit softcursor drm_kms_helper snd_rawmidi snd_seq_midi_event coretemp drm snd_seq kvm btusb bluetooth snd_timer iwlwifi pcmcia tpm_infineon i2c_algo_bit joydev snd_seq_device intel_agp cfg80211 snd intel_gtt yenta_socket pcmcia_rsrc sony_laptop agpgart microcode psmouse tpm_tis serio_raw mxm_wmi soundcore snd_page_alloc tpm acpi_cpufreq lpc_ich pcmcia_core tpm_bios mperf processor lp parport firewire_ohci firewire_core crc_itu_t sdhci_pci sdhci thermal e1000e
[92146.548173] Pid: 4304, comm: kworker/0:0 Tainted: G W 3.8.0-rc3-s0i3-v3-test+ #9
[92146.548175] Call Trace:
[92146.548189] [<c10378e2>] warn_slowpath_common+0x72/0xa0
[92146.548227] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548263] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548270] [<c10379b3>] warn_slowpath_fmt+0x33/0x40
[92146.548307] [<f86398b4>] intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548344] [<f86399c2>] intel_disable_pipe+0x102/0x190 [i915]
[92146.548380] [<f8639ea4>] ? intel_disable_plane+0x64/0x80 [i915]
[92146.548417] [<f8639f7c>] i9xx_crtc_disable+0xbc/0x150 [i915]
[92146.548456] [<f863ebee>] intel_crtc_update_dpms+0x5e/0x90 [i915]
[92146.548493] [<f86437cf>] intel_modeset_setup_hw_state+0x42f/0x8f0 [i915]
[92146.548535] [<f8645b0b>] intel_lid_notify+0x9b/0xc0 [i915]
[92146.548543] [<c15610d3>] notifier_call_chain+0x43/0x60
[92146.548550] [<c105d1e1>] __blocking_notifier_call_chain+0x41/0x80
[92146.548556] [<c105d23f>] blocking_notifier_call_chain+0x1f/0x30
[92146.548563] [<c131a684>] acpi_lid_send_state+0x78/0xa4
[92146.548569] [<c131aa9e>] acpi_button_notify+0x3b/0xf1
[92146.548577] [<c12df56a>] ? acpi_os_execute+0x17/0x19
[92146.548582] [<c12e591a>] ? acpi_ec_sync_query+0xa5/0xbc
[92146.548589] [<c12e2b82>] acpi_device_notify+0x16/0x18
[92146.548595] [<c12f4904>] acpi_ev_notify_dispatch+0x38/0x4f
[92146.548600] [<c12df0e8>] acpi_os_execute_deferred+0x20/0x2b
[92146.548607] [<c1051208>] process_one_work+0x128/0x3f0
[92146.548613] [<c1564f73>] ? common_interrupt+0x33/0x38
[92146.548618] [<c104f8c0>] ? wake_up_worker+0x30/0x30
[92146.548624] [<c12df0c8>] ? acpi_os_wait_events_complete+0x1e/0x1e
[92146.548629] [<c10524f9>] worker_thread+0x119/0x3b0
[92146.548634] [<c10523e0>] ? manage_workers+0x240/0x240
[92146.548640] [<c1056e84>] kthread+0x94/0xa0
[92146.548647] [<c1060000>] ? ftrace_raw_output_sched_stat_runtime+0x70/0xf0
[92146.548652] [<c15649b7>] ret_from_kernel_thread+0x1b/0x28
[92146.548658] [<c1056df0>] ? kthread_create_on_node+0xc0/0xc0
three different modeset flags are introduced in this patch
MODESET_ON_LID_OPEN: do modeset on next lid open event
MODESET_DONE: modeset already done
MODESET_SUSPENDED: suspended, only do modeset when system is resumed
In this way,
1. when lid is closed, MODESET_ON_LID_OPEN is set so that
we'll do modeset on next lid open event.
2. when lid is opened, MODESET_DONE is set
so that duplicate lid open events will be ignored.
3. when system suspends, MODESET_SUSPENDED is set.
In this case, we will not do modeset on any lid events.
Plus, locking mechanism is also introduced to avoid racing.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-05 11:41:53 +04:00
|
|
|
mutex_lock(&dev_priv->modeset_restore_lock);
|
|
|
|
dev_priv->modeset_restore = MODESET_DONE;
|
|
|
|
mutex_unlock(&dev_priv->modeset_restore_lock);
|
2013-12-07 02:32:13 +04:00
|
|
|
|
|
|
|
intel_runtime_pm_put(dev_priv);
|
2010-02-07 23:48:24 +03:00
|
|
|
return error;
|
|
|
|
}
|
|
|
|
|
2012-11-02 22:14:02 +04:00
|
|
|
static int i915_drm_thaw(struct drm_device *dev)
|
|
|
|
{
|
2013-11-04 19:28:47 +04:00
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET))
|
2013-10-16 20:21:30 +04:00
|
|
|
i915_check_and_clear_faults(dev);
|
2012-11-02 22:14:02 +04:00
|
|
|
|
2013-09-13 01:06:43 +04:00
|
|
|
return __i915_drm_thaw(dev, true);
|
2010-02-07 23:48:24 +03:00
|
|
|
}
|
|
|
|
|
2010-02-01 08:38:10 +03:00
|
|
|
int i915_resume(struct drm_device *dev)
|
2010-02-07 23:48:24 +03:00
|
|
|
{
|
2012-11-02 22:14:02 +04:00
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
2010-09-08 12:45:11 +04:00
|
|
|
int ret;
|
|
|
|
|
2010-12-07 02:20:40 +03:00
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
|
|
return 0;
|
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
if (pci_enable_device(dev->pdev))
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
pci_set_master(dev->pdev);
|
|
|
|
|
2012-11-02 22:14:02 +04:00
|
|
|
/*
|
|
|
|
* Platforms with opregion should have sane BIOS, older ones (gen3 and
|
2013-09-13 01:06:43 +04:00
|
|
|
* earlier) need to restore the GTT mappings since the BIOS might clear
|
|
|
|
* all our scratch PTEs.
|
2012-11-02 22:14:02 +04:00
|
|
|
*/
|
2013-09-13 01:06:43 +04:00
|
|
|
ret = __i915_drm_thaw(dev, !dev_priv->opregion.header);
|
2010-09-08 12:45:11 +04:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
drm_kms_helper_poll_enable(dev);
|
|
|
|
return 0;
|
2007-11-22 07:14:14 +03:00
|
|
|
}
|
|
|
|
|
2009-09-15 01:48:45 +04:00
|
|
|
/**
|
2011-11-28 22:15:17 +04:00
|
|
|
* i915_reset - reset chip after a hang
|
2009-09-15 01:48:45 +04:00
|
|
|
* @dev: drm device to reset
|
|
|
|
*
|
|
|
|
* Reset the chip. Useful if a hang is detected. Returns zero on successful
|
|
|
|
* reset or otherwise an error code.
|
|
|
|
*
|
|
|
|
* Procedure is fairly simple:
|
|
|
|
* - reset the chip using the reset reg
|
|
|
|
* - re-init context state
|
|
|
|
* - re-init hardware status page
|
|
|
|
* - re-init ring buffer
|
|
|
|
* - re-init interrupt state
|
|
|
|
* - re-init display
|
|
|
|
*/
|
2012-04-27 17:17:44 +04:00
|
|
|
int i915_reset(struct drm_device *dev)
|
2009-09-15 01:48:45 +04:00
|
|
|
{
|
|
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
2013-05-28 13:38:44 +04:00
|
|
|
bool simulated;
|
2010-09-11 14:17:19 +04:00
|
|
|
int ret;
|
2009-09-15 01:48:45 +04:00
|
|
|
|
2014-01-21 13:24:25 +04:00
|
|
|
if (!i915.reset)
|
2010-12-23 16:33:15 +03:00
|
|
|
return 0;
|
|
|
|
|
2012-07-05 00:18:39 +04:00
|
|
|
mutex_lock(&dev->struct_mutex);
|
2009-09-15 01:48:45 +04:00
|
|
|
|
2010-09-30 19:53:18 +04:00
|
|
|
i915_gem_reset(dev);
|
2010-09-19 15:31:36 +04:00
|
|
|
|
2013-05-28 13:38:44 +04:00
|
|
|
simulated = dev_priv->gpu_error.stop_rings != 0;
|
|
|
|
|
2013-08-30 17:19:28 +04:00
|
|
|
ret = intel_gpu_reset(dev);
|
|
|
|
|
|
|
|
/* Also reset the gpu hangman. */
|
|
|
|
if (simulated) {
|
|
|
|
DRM_INFO("Simulated gpu hang, resetting stop_rings\n");
|
|
|
|
dev_priv->gpu_error.stop_rings = 0;
|
|
|
|
if (ret == -ENODEV) {
|
2013-11-07 12:48:57 +04:00
|
|
|
DRM_INFO("Reset not implemented, but ignoring "
|
|
|
|
"error for simulated gpu hangs\n");
|
2013-08-30 17:19:28 +04:00
|
|
|
ret = 0;
|
|
|
|
}
|
2013-05-28 13:38:44 +04:00
|
|
|
}
|
2013-08-30 17:19:28 +04:00
|
|
|
|
2010-09-11 14:17:19 +04:00
|
|
|
if (ret) {
|
2013-11-07 12:48:57 +04:00
|
|
|
DRM_ERROR("Failed to reset chip: %i\n", ret);
|
2010-05-17 17:23:52 +04:00
|
|
|
mutex_unlock(&dev->struct_mutex);
|
2010-09-19 15:38:26 +04:00
|
|
|
return ret;
|
2009-09-15 01:48:45 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Ok, now get things going again... */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Everything depends on having the GTT running, so we need to start
|
|
|
|
* there. Fortunately we don't need to do this unless we reset the
|
|
|
|
* chip at a PCI level.
|
|
|
|
*
|
|
|
|
* Next we need to restore the context, but we don't use those
|
|
|
|
* yet either...
|
|
|
|
*
|
|
|
|
* Ring buffer needs to be re-initialized in the KMS case, or if X
|
|
|
|
* was running at the time of the reset (i.e. we weren't VT
|
|
|
|
* switched away).
|
|
|
|
*/
|
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET) ||
|
2013-07-09 18:51:37 +04:00
|
|
|
!dev_priv->ums.mm_suspended) {
|
|
|
|
dev_priv->ums.mm_suspended = 0;
|
2010-11-18 04:31:13 +03:00
|
|
|
|
2013-10-14 21:01:36 +04:00
|
|
|
ret = i915_gem_init_hw(dev);
|
2012-06-19 20:40:00 +04:00
|
|
|
mutex_unlock(&dev->struct_mutex);
|
2013-10-14 21:01:36 +04:00
|
|
|
if (ret) {
|
|
|
|
DRM_ERROR("Failed hw init on reset %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
2012-04-10 17:50:11 +04:00
|
|
|
|
2009-09-15 01:48:45 +04:00
|
|
|
drm_irq_uninstall(dev);
|
|
|
|
drm_irq_install(dev);
|
2014-02-04 21:32:31 +04:00
|
|
|
|
|
|
|
/* rps/rc6 re-init is necessary to restore state lost after the
|
|
|
|
* reset and the re-install of drm irq. Skip for ironlake per
|
|
|
|
* previous concerns that it doesn't respond well to some forms
|
|
|
|
* of re-init after reset. */
|
|
|
|
if (INTEL_INFO(dev)->gen > 5) {
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
|
|
intel_enable_gt_powersave(dev);
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
}
|
|
|
|
|
2012-12-11 17:05:07 +04:00
|
|
|
intel_hpd_init(dev);
|
2012-04-27 17:17:41 +04:00
|
|
|
} else {
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
2009-09-15 01:48:45 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-12-22 03:09:25 +04:00
|
|
|
static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
2009-01-05 00:55:33 +03:00
|
|
|
{
|
2012-06-25 17:58:49 +04:00
|
|
|
struct intel_device_info *intel_info =
|
|
|
|
(struct intel_device_info *) ent->driver_data;
|
|
|
|
|
2014-01-21 13:24:25 +04:00
|
|
|
if (IS_PRELIMINARY_HW(intel_info) && !i915.preliminary_hw_support) {
|
2013-08-24 03:00:07 +04:00
|
|
|
DRM_INFO("This hardware requires preliminary hardware support.\n"
|
|
|
|
"See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
2011-02-01 22:43:02 +03:00
|
|
|
/* Only bind to function 0 of the device. Early generations
|
|
|
|
* used function 1 as a placeholder for multi-head. This causes
|
|
|
|
* us confusion instead, especially on the systems where both
|
|
|
|
* functions have the same PCI-ID!
|
|
|
|
*/
|
|
|
|
if (PCI_FUNC(pdev->devfn))
|
|
|
|
return -ENODEV;
|
|
|
|
|
2013-12-11 14:34:33 +04:00
|
|
|
driver.driver_features &= ~(DRIVER_USE_AGP);
|
2012-06-25 17:58:49 +04:00
|
|
|
|
2010-05-27 23:40:25 +04:00
|
|
|
return drm_get_pci_dev(pdev, ent, &driver);
|
2009-01-05 00:55:33 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
i915_pci_remove(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
|
|
|
|
|
|
drm_put_dev(dev);
|
|
|
|
}
|
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
static int i915_pm_suspend(struct device *dev)
|
2009-01-05 00:55:33 +03:00
|
|
|
{
|
2010-02-07 23:48:24 +03:00
|
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
struct drm_device *drm_dev = pci_get_drvdata(pdev);
|
|
|
|
int error;
|
2009-01-05 00:55:33 +03:00
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
if (!drm_dev || !drm_dev->dev_private) {
|
|
|
|
dev_err(dev, "DRM not initialized, aborting suspend.\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
2009-01-05 00:55:33 +03:00
|
|
|
|
2010-12-07 02:20:40 +03:00
|
|
|
if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
|
|
return 0;
|
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
error = i915_drm_freeze(drm_dev);
|
|
|
|
if (error)
|
|
|
|
return error;
|
2009-01-05 00:55:33 +03:00
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
pci_disable_device(pdev);
|
|
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
2009-12-16 08:36:10 +03:00
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
return 0;
|
2009-12-16 08:36:10 +03:00
|
|
|
}
|
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
static int i915_pm_resume(struct device *dev)
|
2009-12-16 08:36:10 +03:00
|
|
|
{
|
2010-02-07 23:48:24 +03:00
|
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
struct drm_device *drm_dev = pci_get_drvdata(pdev);
|
|
|
|
|
|
|
|
return i915_resume(drm_dev);
|
2009-12-16 08:36:10 +03:00
|
|
|
}
|
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
static int i915_pm_freeze(struct device *dev)
|
2009-12-16 08:36:10 +03:00
|
|
|
{
|
2010-02-07 23:48:24 +03:00
|
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
struct drm_device *drm_dev = pci_get_drvdata(pdev);
|
|
|
|
|
|
|
|
if (!drm_dev || !drm_dev->dev_private) {
|
|
|
|
dev_err(dev, "DRM not initialized, aborting suspend.\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
return i915_drm_freeze(drm_dev);
|
2009-12-16 08:36:10 +03:00
|
|
|
}
|
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
static int i915_pm_thaw(struct device *dev)
|
2009-12-16 08:36:10 +03:00
|
|
|
{
|
2010-02-07 23:48:24 +03:00
|
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
struct drm_device *drm_dev = pci_get_drvdata(pdev);
|
|
|
|
|
|
|
|
return i915_drm_thaw(drm_dev);
|
2009-12-16 08:36:10 +03:00
|
|
|
}
|
|
|
|
|
2010-02-07 23:48:24 +03:00
|
|
|
static int i915_pm_poweroff(struct device *dev)
|
2009-12-16 08:36:10 +03:00
|
|
|
{
|
2010-02-07 23:48:24 +03:00
|
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
struct drm_device *drm_dev = pci_get_drvdata(pdev);
|
|
|
|
|
2010-02-19 01:06:27 +03:00
|
|
|
return i915_drm_freeze(drm_dev);
|
2009-12-16 08:36:10 +03:00
|
|
|
}
|
|
|
|
|
2013-12-07 02:32:13 +04:00
|
|
|
static int i915_runtime_suspend(struct device *device)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = to_pci_dev(device);
|
|
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
|
|
|
|
WARN_ON(!HAS_RUNTIME_PM(dev));
|
|
|
|
|
|
|
|
DRM_DEBUG_KMS("Suspending device\n");
|
|
|
|
|
2013-12-13 21:22:31 +04:00
|
|
|
i915_gem_release_all_mmaps(dev_priv);
|
|
|
|
|
2013-12-13 21:22:30 +04:00
|
|
|
del_timer_sync(&dev_priv->gpu_error.hangcheck_timer);
|
2013-12-07 02:32:13 +04:00
|
|
|
dev_priv->pm.suspended = true;
|
2014-01-15 03:36:15 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* current versions of firmware which depend on this opregion
|
|
|
|
* notification have repurposed the D1 definition to mean
|
|
|
|
* "runtime suspended" vs. what you would normally expect (D3)
|
|
|
|
* to distinguish it from notifications that might be sent
|
|
|
|
* via the suspend path.
|
|
|
|
*/
|
|
|
|
intel_opregion_notify_adapter(dev, PCI_D1);
|
2013-12-07 02:32:13 +04:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int i915_runtime_resume(struct device *device)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = to_pci_dev(device);
|
|
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
|
|
|
|
WARN_ON(!HAS_RUNTIME_PM(dev));
|
|
|
|
|
|
|
|
DRM_DEBUG_KMS("Resuming device\n");
|
|
|
|
|
2013-12-07 02:34:21 +04:00
|
|
|
intel_opregion_notify_adapter(dev, PCI_D0);
|
2013-12-07 02:32:13 +04:00
|
|
|
dev_priv->pm.suspended = false;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2010-06-06 18:40:20 +04:00
|
|
|
static const struct dev_pm_ops i915_pm_ops = {
|
2011-08-16 23:34:10 +04:00
|
|
|
.suspend = i915_pm_suspend,
|
|
|
|
.resume = i915_pm_resume,
|
|
|
|
.freeze = i915_pm_freeze,
|
|
|
|
.thaw = i915_pm_thaw,
|
|
|
|
.poweroff = i915_pm_poweroff,
|
|
|
|
.restore = i915_pm_resume,
|
2013-12-07 02:32:13 +04:00
|
|
|
.runtime_suspend = i915_runtime_suspend,
|
|
|
|
.runtime_resume = i915_runtime_resume,
|
2009-12-16 08:36:10 +03:00
|
|
|
};
|
|
|
|
|
2012-05-17 15:27:22 +04:00
|
|
|
static const struct vm_operations_struct i915_gem_vm_ops = {
|
2008-11-12 21:03:55 +03:00
|
|
|
.fault = i915_gem_fault,
|
2009-02-12 01:01:46 +03:00
|
|
|
.open = drm_gem_vm_open,
|
|
|
|
.close = drm_gem_vm_close,
|
2008-11-12 21:03:55 +03:00
|
|
|
};
|
|
|
|
|
2011-10-31 18:28:57 +04:00
|
|
|
static const struct file_operations i915_driver_fops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.open = drm_open,
|
|
|
|
.release = drm_release,
|
|
|
|
.unlocked_ioctl = drm_ioctl,
|
|
|
|
.mmap = drm_gem_mmap,
|
|
|
|
.poll = drm_poll,
|
|
|
|
.read = drm_read,
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
|
|
.compat_ioctl = i915_compat_ioctl,
|
|
|
|
#endif
|
|
|
|
.llseek = noop_llseek,
|
|
|
|
};
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
static struct drm_driver driver = {
|
2011-08-25 21:55:54 +04:00
|
|
|
/* Don't use MTRRs here; the Xserver or userspace app should
|
|
|
|
* deal with them for Intel hardware.
|
2005-11-11 15:30:27 +03:00
|
|
|
*/
|
2008-07-30 23:06:12 +04:00
|
|
|
.driver_features =
|
2013-12-11 14:34:33 +04:00
|
|
|
DRIVER_USE_AGP |
|
2013-08-25 20:29:01 +04:00
|
|
|
DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
|
|
|
|
DRIVER_RENDER,
|
2005-11-10 14:16:34 +03:00
|
|
|
.load = i915_driver_load,
|
2007-11-22 07:14:14 +03:00
|
|
|
.unload = i915_driver_unload,
|
2008-07-30 23:06:12 +04:00
|
|
|
.open = i915_driver_open,
|
2005-11-10 14:16:34 +03:00
|
|
|
.lastclose = i915_driver_lastclose,
|
|
|
|
.preclose = i915_driver_preclose,
|
2008-07-30 23:06:12 +04:00
|
|
|
.postclose = i915_driver_postclose,
|
2010-01-09 02:45:33 +03:00
|
|
|
|
|
|
|
/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
|
|
|
|
.suspend = i915_suspend,
|
|
|
|
.resume = i915_resume,
|
|
|
|
|
2005-07-10 11:31:26 +04:00
|
|
|
.device_is_agp = i915_driver_device_is_agp,
|
2008-11-28 07:22:24 +03:00
|
|
|
.master_create = i915_master_create,
|
|
|
|
.master_destroy = i915_master_destroy,
|
2009-02-18 04:08:49 +03:00
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
2009-07-02 06:26:52 +04:00
|
|
|
.debugfs_init = i915_debugfs_init,
|
|
|
|
.debugfs_cleanup = i915_debugfs_cleanup,
|
2009-02-18 04:08:49 +03:00
|
|
|
#endif
|
2008-07-30 23:06:12 +04:00
|
|
|
.gem_free_object = i915_gem_free_object,
|
2008-11-12 21:03:55 +03:00
|
|
|
.gem_vm_ops = &i915_gem_vm_ops,
|
2012-05-10 17:25:09 +04:00
|
|
|
|
|
|
|
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
|
|
|
|
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
|
|
|
|
.gem_prime_export = i915_gem_prime_export,
|
|
|
|
.gem_prime_import = i915_gem_prime_import,
|
|
|
|
|
2011-02-07 05:16:14 +03:00
|
|
|
.dumb_create = i915_gem_dumb_create,
|
|
|
|
.dumb_map_offset = i915_gem_mmap_gtt,
|
2013-07-16 11:12:04 +04:00
|
|
|
.dumb_destroy = drm_gem_dumb_destroy,
|
2005-04-17 02:20:36 +04:00
|
|
|
.ioctls = i915_ioctls,
|
2011-10-31 18:28:57 +04:00
|
|
|
.fops = &i915_driver_fops,
|
2005-11-10 14:16:34 +03:00
|
|
|
.name = DRIVER_NAME,
|
|
|
|
.desc = DRIVER_DESC,
|
|
|
|
.date = DRIVER_DATE,
|
|
|
|
.major = DRIVER_MAJOR,
|
|
|
|
.minor = DRIVER_MINOR,
|
|
|
|
.patchlevel = DRIVER_PATCHLEVEL,
|
2005-04-17 02:20:36 +04:00
|
|
|
};
|
|
|
|
|
2010-12-14 20:16:38 +03:00
|
|
|
static struct pci_driver i915_pci_driver = {
|
|
|
|
.name = DRIVER_NAME,
|
|
|
|
.id_table = pciidlist,
|
|
|
|
.probe = i915_pci_probe,
|
|
|
|
.remove = i915_pci_remove,
|
|
|
|
.driver.pm = &i915_pm_ops,
|
|
|
|
};
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
static int __init i915_init(void)
|
|
|
|
{
|
|
|
|
driver.num_ioctls = i915_max_ioctl;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If CONFIG_DRM_I915_KMS is set, default to KMS unless
|
|
|
|
* explicitly disabled with the module pararmeter.
|
|
|
|
*
|
|
|
|
* Otherwise, just follow the parameter (defaulting to off).
|
|
|
|
*
|
|
|
|
* Allow optional vga_text_mode_force boot option to override
|
|
|
|
* the default behavior.
|
|
|
|
*/
|
|
|
|
#if defined(CONFIG_DRM_I915_KMS)
|
2014-01-21 13:24:25 +04:00
|
|
|
if (i915.modeset != 0)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
driver.driver_features |= DRIVER_MODESET;
|
|
|
|
#endif
|
2014-01-21 13:24:25 +04:00
|
|
|
if (i915.modeset == 1)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
driver.driver_features |= DRIVER_MODESET;
|
|
|
|
|
|
|
|
#ifdef CONFIG_VGA_CONSOLE
|
2014-01-21 13:24:25 +04:00
|
|
|
if (vgacon_text_force() && i915.modeset == -1)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
driver.driver_features &= ~DRIVER_MODESET;
|
|
|
|
#endif
|
|
|
|
|
2013-11-14 01:11:25 +04:00
|
|
|
if (!(driver.driver_features & DRIVER_MODESET)) {
|
2011-01-23 13:45:14 +03:00
|
|
|
driver.get_vblank_timestamp = NULL;
|
2013-11-14 01:11:25 +04:00
|
|
|
#ifndef CONFIG_DRM_I915_UMS
|
|
|
|
/* Silently fail loading to not upset userspace. */
|
|
|
|
return 0;
|
|
|
|
#endif
|
|
|
|
}
|
2011-01-23 13:45:14 +03:00
|
|
|
|
2010-12-14 20:16:38 +03:00
|
|
|
return drm_pci_init(&driver, &i915_pci_driver);
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit i915_exit(void)
|
|
|
|
{
|
2013-11-15 20:16:33 +04:00
|
|
|
#ifndef CONFIG_DRM_I915_UMS
|
|
|
|
if (!(driver.driver_features & DRIVER_MODESET))
|
|
|
|
return; /* Never loaded a driver. */
|
|
|
|
#endif
|
|
|
|
|
2010-12-14 20:16:38 +03:00
|
|
|
drm_pci_exit(&driver, &i915_pci_driver);
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
module_init(i915_init);
|
|
|
|
module_exit(i915_exit);
|
|
|
|
|
2005-09-25 08:28:13 +04:00
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
2005-04-17 02:20:36 +04:00
|
|
|
MODULE_LICENSE("GPL and additional rights");
|