2019-04-27 20:32:56 +03:00
|
|
|
// SPDX-License-Identifier: GPL-2.0+
|
2008-10-07 17:46:22 +04:00
|
|
|
/*
|
|
|
|
* net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
|
dsa: add switch chip cascading support
The initial version of the DSA driver only supported a single switch
chip per network interface, while DSA-capable switch chips can be
interconnected to form a tree of switch chips. This patch adds support
for multiple switch chips on a network interface.
An example topology for a 16-port device with an embedded CPU is as
follows:
+-----+ +--------+ +--------+
| |eth0 10| switch |9 10| switch |
| CPU +----------+ +-------+ |
| | | chip 0 | | chip 1 |
+-----+ +---++---+ +---++---+
|| ||
|| ||
||1000baseT ||1000baseT
||ports 1-8 ||ports 9-16
This requires a couple of interdependent changes in the DSA layer:
- The dsa platform driver data needs to be extended: there is still
only one netdevice per DSA driver instance (eth0 in the example
above), but each of the switch chips in the tree needs its own
mii_bus device pointer, MII management bus address, and port name
array. (include/net/dsa.h) The existing in-tree dsa users need
some small changes to deal with this. (arch/arm)
- The DSA and Ethertype DSA tagging modules need to be extended to
use the DSA device ID field on receive and demultiplex the packet
accordingly, and fill in the DSA device ID field on transmit
according to which switch chip the packet is heading to.
(net/dsa/tag_{dsa,edsa}.c)
- The concept of "CPU port", which is the switch chip port that the
CPU is connected to (port 10 on switch chip 0 in the example), needs
to be extended with the concept of "upstream port", which is the
port on the switch chip that will bring us one hop closer to the CPU
(port 10 for both switch chips in the example above).
- The dsa platform data needs to specify which ports on which switch
chips are links to other switch chips, so that we can enable DSA
tagging mode on them. (For inter-switch links, we always use
non-EtherType DSA tagging, since it has lower overhead. The CPU
link uses dsa or edsa tagging depending on what the 'root' switch
chip supports.) This is done by specifying "dsa" for the given
port in the port array.
- The dsa platform data needs to be extended with information on via
which port to reach any given switch chip from any given switch chip.
This info is specified via the per-switch chip data struct ->rtable[]
array, which gives the nexthop ports for each of the other switches
in the tree.
For the example topology above, the dsa platform data would look
something like this:
static struct dsa_chip_data sw[2] = {
{
.mii_bus = &foo,
.sw_addr = 1,
.port_names[0] = "p1",
.port_names[1] = "p2",
.port_names[2] = "p3",
.port_names[3] = "p4",
.port_names[4] = "p5",
.port_names[5] = "p6",
.port_names[6] = "p7",
.port_names[7] = "p8",
.port_names[9] = "dsa",
.port_names[10] = "cpu",
.rtable = (s8 []){ -1, 9, },
}, {
.mii_bus = &foo,
.sw_addr = 2,
.port_names[0] = "p9",
.port_names[1] = "p10",
.port_names[2] = "p11",
.port_names[3] = "p12",
.port_names[4] = "p13",
.port_names[5] = "p14",
.port_names[6] = "p15",
.port_names[7] = "p16",
.port_names[10] = "dsa",
.rtable = (s8 []){ 10, -1, },
},
},
static struct dsa_platform_data pd = {
.netdev = &foo,
.nr_switches = 2,
.sw = sw,
};
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-20 12:52:09 +03:00
|
|
|
* Copyright (c) 2008-2009 Marvell Semiconductor
|
2008-10-07 17:46:22 +04:00
|
|
|
*/
|
|
|
|
|
2013-01-08 20:05:54 +04:00
|
|
|
#include <linux/delay.h>
|
2017-10-13 21:18:07 +03:00
|
|
|
#include <linux/etherdevice.h>
|
2013-01-08 20:05:54 +04:00
|
|
|
#include <linux/jiffies.h>
|
2008-10-07 17:46:22 +04:00
|
|
|
#include <linux/list.h>
|
2012-01-24 14:41:40 +04:00
|
|
|
#include <linux/module.h>
|
2008-10-07 17:46:22 +04:00
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include <linux/phy.h>
|
2011-11-27 21:06:08 +04:00
|
|
|
#include <net/dsa.h>
|
2015-11-10 18:51:36 +03:00
|
|
|
#include "mv88e6060.h"
|
2008-10-07 17:46:22 +04:00
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
static int reg_read(struct mv88e6060_priv *priv, int addr, int reg)
|
2008-10-07 17:46:22 +04:00
|
|
|
{
|
2016-04-13 03:40:42 +03:00
|
|
|
return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
|
2008-10-07 17:46:22 +04:00
|
|
|
}
|
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val)
|
2008-10-07 17:46:22 +04:00
|
|
|
{
|
2016-04-13 03:40:42 +03:00
|
|
|
return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
|
2008-10-07 17:46:22 +04:00
|
|
|
}
|
|
|
|
|
2016-04-17 20:23:55 +03:00
|
|
|
static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
|
2008-10-07 17:46:22 +04:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
2015-11-10 18:51:36 +03:00
|
|
|
ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
|
2008-10-07 17:46:22 +04:00
|
|
|
if (ret >= 0) {
|
2015-11-10 18:51:36 +03:00
|
|
|
if (ret == PORT_SWITCH_ID_6060)
|
2014-10-29 20:44:54 +03:00
|
|
|
return "Marvell 88E6060 (A0)";
|
2015-11-10 18:51:36 +03:00
|
|
|
if (ret == PORT_SWITCH_ID_6060_R1 ||
|
|
|
|
ret == PORT_SWITCH_ID_6060_R2)
|
2014-10-29 20:44:54 +03:00
|
|
|
return "Marvell 88E6060 (B0)";
|
2015-11-10 18:51:36 +03:00
|
|
|
if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
|
2008-10-07 17:46:22 +04:00
|
|
|
return "Marvell 88E6060";
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2017-11-11 02:22:52 +03:00
|
|
|
static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds,
|
|
|
|
int port)
|
2016-08-22 17:01:01 +03:00
|
|
|
{
|
|
|
|
return DSA_TAG_PROTO_TRAILER;
|
|
|
|
}
|
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
|
2008-10-07 17:46:22 +04:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
int ret;
|
2013-01-08 20:05:54 +04:00
|
|
|
unsigned long timeout;
|
2008-10-07 17:46:22 +04:00
|
|
|
|
2013-01-08 20:05:53 +04:00
|
|
|
/* Set all ports to the disabled state. */
|
2015-11-10 18:51:36 +03:00
|
|
|
for (i = 0; i < MV88E6060_PORTS; i++) {
|
2019-04-27 20:32:59 +03:00
|
|
|
ret = reg_read(priv, REG_PORT(i), PORT_CONTROL);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2019-04-27 20:32:58 +03:00
|
|
|
ret = reg_write(priv, REG_PORT(i), PORT_CONTROL,
|
|
|
|
ret & ~PORT_CONTROL_STATE_MASK);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2008-10-07 17:46:22 +04:00
|
|
|
}
|
|
|
|
|
2013-01-08 20:05:53 +04:00
|
|
|
/* Wait for transmit queues to drain. */
|
2013-01-08 20:05:54 +04:00
|
|
|
usleep_range(2000, 4000);
|
2008-10-07 17:46:22 +04:00
|
|
|
|
2013-01-08 20:05:53 +04:00
|
|
|
/* Reset the switch. */
|
2019-04-27 20:32:58 +03:00
|
|
|
ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
|
|
|
|
GLOBAL_ATU_CONTROL_SWRESET |
|
|
|
|
GLOBAL_ATU_CONTROL_LEARNDIS);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2008-10-07 17:46:22 +04:00
|
|
|
|
2013-01-08 20:05:53 +04:00
|
|
|
/* Wait up to one second for reset to complete. */
|
2013-01-08 20:05:54 +04:00
|
|
|
timeout = jiffies + 1 * HZ;
|
|
|
|
while (time_before(jiffies, timeout)) {
|
2019-04-27 20:32:59 +03:00
|
|
|
ret = reg_read(priv, REG_GLOBAL, GLOBAL_STATUS);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2015-11-10 18:51:36 +03:00
|
|
|
if (ret & GLOBAL_STATUS_INIT_READY)
|
2008-10-07 17:46:22 +04:00
|
|
|
break;
|
|
|
|
|
2013-01-08 20:05:54 +04:00
|
|
|
usleep_range(1000, 2000);
|
2008-10-07 17:46:22 +04:00
|
|
|
}
|
2013-01-08 20:05:54 +04:00
|
|
|
if (time_after(jiffies, timeout))
|
2008-10-07 17:46:22 +04:00
|
|
|
return -ETIMEDOUT;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
static int mv88e6060_setup_global(struct mv88e6060_priv *priv)
|
2008-10-07 17:46:22 +04:00
|
|
|
{
|
2019-04-27 20:32:58 +03:00
|
|
|
int ret;
|
|
|
|
|
2013-01-08 20:05:53 +04:00
|
|
|
/* Disable discarding of frames with excessive collisions,
|
2008-10-07 17:46:22 +04:00
|
|
|
* set the maximum frame size to 1536 bytes, and mask all
|
|
|
|
* interrupt sources.
|
|
|
|
*/
|
2019-04-27 20:32:58 +03:00
|
|
|
ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL,
|
|
|
|
GLOBAL_CONTROL_MAX_FRAME_1536);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2008-10-07 17:46:22 +04:00
|
|
|
|
2018-12-01 02:58:36 +03:00
|
|
|
/* Disable automatic address learning.
|
2008-10-07 17:46:22 +04:00
|
|
|
*/
|
2019-04-27 20:32:58 +03:00
|
|
|
return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
|
|
|
|
GLOBAL_ATU_CONTROL_LEARNDIS);
|
2008-10-07 17:46:22 +04:00
|
|
|
}
|
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
|
2008-10-07 17:46:22 +04:00
|
|
|
{
|
|
|
|
int addr = REG_PORT(p);
|
2019-04-27 20:32:58 +03:00
|
|
|
int ret;
|
2008-10-07 17:46:22 +04:00
|
|
|
|
2013-01-08 20:05:53 +04:00
|
|
|
/* Do not force flow control, disable Ingress and Egress
|
2008-10-07 17:46:22 +04:00
|
|
|
* Header tagging, disable VLAN tunneling, and set the port
|
|
|
|
* state to Forwarding. Additionally, if this is the CPU
|
|
|
|
* port, enable Ingress and Egress Trailer tagging mode.
|
|
|
|
*/
|
2019-04-27 20:32:58 +03:00
|
|
|
ret = reg_write(priv, addr, PORT_CONTROL,
|
|
|
|
dsa_is_cpu_port(priv->ds, p) ?
|
2015-11-10 18:51:36 +03:00
|
|
|
PORT_CONTROL_TRAILER |
|
|
|
|
PORT_CONTROL_INGRESS_MODE |
|
|
|
|
PORT_CONTROL_STATE_FORWARDING :
|
|
|
|
PORT_CONTROL_STATE_FORWARDING);
|
2019-04-27 20:32:58 +03:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
2008-10-07 17:46:22 +04:00
|
|
|
|
2013-01-08 20:05:53 +04:00
|
|
|
/* Port based VLAN map: give each port its own address
|
2008-10-07 17:46:22 +04:00
|
|
|
* database, allow the CPU port to talk to each of the 'real'
|
|
|
|
* ports, and allow each of the 'real' ports to only talk to
|
|
|
|
* the CPU port.
|
|
|
|
*/
|
2019-04-27 20:32:58 +03:00
|
|
|
ret = reg_write(priv, addr, PORT_VLAN_MAP,
|
|
|
|
((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
|
|
|
|
(dsa_is_cpu_port(priv->ds, p) ?
|
|
|
|
dsa_user_ports(priv->ds) :
|
|
|
|
BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2008-10-07 17:46:22 +04:00
|
|
|
|
2013-01-08 20:05:53 +04:00
|
|
|
/* Port Association Vector: when learning source addresses
|
2008-10-07 17:46:22 +04:00
|
|
|
* of packets, add the address to the address database using
|
|
|
|
* a port bitmap that has only the bit for this port set and
|
|
|
|
* the other bits clear.
|
|
|
|
*/
|
2019-04-27 20:32:58 +03:00
|
|
|
return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p));
|
2008-10-07 17:46:22 +04:00
|
|
|
}
|
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
|
2017-10-13 21:18:07 +03:00
|
|
|
{
|
|
|
|
u8 addr[ETH_ALEN];
|
2019-04-27 20:32:58 +03:00
|
|
|
int ret;
|
2017-10-13 21:18:07 +03:00
|
|
|
u16 val;
|
|
|
|
|
|
|
|
eth_random_addr(addr);
|
|
|
|
|
|
|
|
val = addr[0] << 8 | addr[1];
|
|
|
|
|
|
|
|
/* The multicast bit is always transmitted as a zero, so the switch uses
|
|
|
|
* bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
|
|
|
|
*/
|
|
|
|
val &= 0xfeff;
|
|
|
|
|
2019-04-27 20:32:58 +03:00
|
|
|
ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23,
|
|
|
|
(addr[2] << 8) | addr[3]);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2017-10-13 21:18:07 +03:00
|
|
|
|
2019-04-27 20:32:58 +03:00
|
|
|
return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45,
|
|
|
|
(addr[4] << 8) | addr[5]);
|
2017-10-13 21:18:07 +03:00
|
|
|
}
|
|
|
|
|
2008-10-07 17:46:22 +04:00
|
|
|
static int mv88e6060_setup(struct dsa_switch *ds)
|
|
|
|
{
|
2019-04-27 20:32:57 +03:00
|
|
|
struct mv88e6060_priv *priv = ds->priv;
|
2008-10-07 17:46:22 +04:00
|
|
|
int ret;
|
2016-04-13 03:40:42 +03:00
|
|
|
int i;
|
2008-10-07 17:46:22 +04:00
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
priv->ds = ds;
|
|
|
|
|
|
|
|
ret = mv88e6060_switch_reset(priv);
|
2008-10-07 17:46:22 +04:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* @@@ initialise atu */
|
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
ret = mv88e6060_setup_global(priv);
|
2008-10-07 17:46:22 +04:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
ret = mv88e6060_setup_addr(priv);
|
2017-10-13 21:18:07 +03:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2015-11-10 18:51:36 +03:00
|
|
|
for (i = 0; i < MV88E6060_PORTS; i++) {
|
2019-04-27 20:32:57 +03:00
|
|
|
ret = mv88e6060_setup_port(priv, i);
|
2008-10-07 17:46:22 +04:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv88e6060_port_to_phy_addr(int port)
|
|
|
|
{
|
2015-11-10 18:51:36 +03:00
|
|
|
if (port >= 0 && port < MV88E6060_PORTS)
|
2008-10-07 17:46:22 +04:00
|
|
|
return port;
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
|
|
|
|
{
|
2019-04-27 20:32:57 +03:00
|
|
|
struct mv88e6060_priv *priv = ds->priv;
|
2008-10-07 17:46:22 +04:00
|
|
|
int addr;
|
|
|
|
|
|
|
|
addr = mv88e6060_port_to_phy_addr(port);
|
|
|
|
if (addr == -1)
|
|
|
|
return 0xffff;
|
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
return reg_read(priv, addr, regnum);
|
2008-10-07 17:46:22 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
|
|
|
|
{
|
2019-04-27 20:32:57 +03:00
|
|
|
struct mv88e6060_priv *priv = ds->priv;
|
2008-10-07 17:46:22 +04:00
|
|
|
int addr;
|
|
|
|
|
|
|
|
addr = mv88e6060_port_to_phy_addr(port);
|
|
|
|
if (addr == -1)
|
|
|
|
return 0xffff;
|
|
|
|
|
2019-04-27 20:32:57 +03:00
|
|
|
return reg_write(priv, addr, regnum, val);
|
2008-10-07 17:46:22 +04:00
|
|
|
}
|
|
|
|
|
2017-01-09 01:52:08 +03:00
|
|
|
static const struct dsa_switch_ops mv88e6060_switch_ops = {
|
2016-08-22 17:01:01 +03:00
|
|
|
.get_tag_protocol = mv88e6060_get_tag_protocol,
|
2008-10-07 17:46:22 +04:00
|
|
|
.setup = mv88e6060_setup,
|
|
|
|
.phy_read = mv88e6060_phy_read,
|
|
|
|
.phy_write = mv88e6060_phy_write,
|
|
|
|
};
|
|
|
|
|
2019-04-28 03:56:21 +03:00
|
|
|
static int mv88e6060_probe(struct mdio_device *mdiodev)
|
|
|
|
{
|
|
|
|
struct device *dev = &mdiodev->dev;
|
|
|
|
struct mv88e6060_priv *priv;
|
|
|
|
struct dsa_switch *ds;
|
|
|
|
const char *name;
|
|
|
|
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
|
|
if (!priv)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
priv->bus = mdiodev->bus;
|
|
|
|
priv->sw_addr = mdiodev->addr;
|
|
|
|
|
|
|
|
name = mv88e6060_get_name(priv->bus, priv->sw_addr);
|
|
|
|
if (!name)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
dev_info(dev, "switch %s detected\n", name);
|
|
|
|
|
|
|
|
ds = dsa_switch_alloc(dev, MV88E6060_PORTS);
|
|
|
|
if (!ds)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
ds->priv = priv;
|
|
|
|
ds->dev = dev;
|
|
|
|
ds->ops = &mv88e6060_switch_ops;
|
|
|
|
|
|
|
|
dev_set_drvdata(dev, ds);
|
|
|
|
|
|
|
|
return dsa_register_switch(ds);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv88e6060_remove(struct mdio_device *mdiodev)
|
|
|
|
{
|
|
|
|
struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
|
|
|
|
|
|
|
|
dsa_unregister_switch(ds);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct of_device_id mv88e6060_of_match[] = {
|
|
|
|
{
|
|
|
|
.compatible = "marvell,mv88e6060",
|
|
|
|
},
|
|
|
|
{ /* sentinel */ },
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct mdio_driver mv88e6060_driver = {
|
|
|
|
.probe = mv88e6060_probe,
|
|
|
|
.remove = mv88e6060_remove,
|
|
|
|
.mdiodrv.driver = {
|
|
|
|
.name = "mv88e6060",
|
|
|
|
.of_match_table = mv88e6060_of_match,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2019-04-28 03:56:22 +03:00
|
|
|
mdio_module_driver(mv88e6060_driver);
|
2011-11-25 18:37:16 +04:00
|
|
|
|
|
|
|
MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
|
|
|
|
MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_ALIAS("platform:mv88e6060");
|