WSL2-Linux-Kernel/drivers/clk/meson/Makefile

#
# Makefile for Meson specific clk
#

obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-pll-div.o
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-input.o clk-dualdiv.o
obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO)	+= clk-triphase.o sclk-div.o
obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO)	+= axg-audio.o
obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
clk: meson: Add support for Meson clock controller This patchset adds the infrastructure for registering and managing the core clocks found on Amlogic MesonX SoCs. In particular: - PLLs - CPU clock - Fixed rate clocks, fixed factor clocks, ... Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 2015-06-01 14:13:53 +03:00			`#`
			`# Makefile for Meson specific clk`
			`#`

clk: meson: Add vid_pll divider driver Add support the VID_PLL fully programmable divider used right after the HDMI PLL clock source. It is used to achieve complex fractional division with a programmble bitfield. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: http://lkml.kernel.org/r/1541516257-16157-2-git-send-email-narmstrong@baylibre.com 2018-11-06 17:57:34 +03:00			`obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-pll-div.o`
clk: meson: add dual divider clock driver Add the dual divider driver. This special divider make a weighted average between 2 dividers to reach fractional divider values. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181221160239.26265-4-jbrunet@baylibre.com 2018-12-21 19:02:37 +03:00			`obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-input.o clk-dualdiv.o`
clk: meson: add axg audio sclk divider driver Add a driver to control the clock divider found in the sample clock generator of the axg audio clock controller. The sclk divider accumulates specific features which make the generic divider unsuitable to control it: - zero based divider (div = val + 1), but zero value gates the clock, so minimum divider value is 2. - lrclk variant may adjust the duty cycle depending the divider value and the 'hi' value. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> 2018-05-22 19:34:55 +03:00			`obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o sclk-div.o`
clk: meson: aoclk: refactor common code into dedicated file We try to refactor the common code into one dedicated file, while preparing to add new Meson-AXG aoclk driver, this would help us to better share the code by all aoclk drivers. Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> 2018-05-03 16:26:20 +03:00			`obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o`
clk: meson: Rename meson8b-clkc.c to reflect gxbb naming convention Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1472319654-59048-2-git-send-email-serveralex@gmail.com 2016-08-27 20:40:49 +03:00			`obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o`
clk: meson: gxbb-ao: replace cec-32k with the dual divider Replace the cec-32k clock of gxbb-ao with the simpler dual divider driver. The dual divider implements only the dividing part. All the other bits are now exposed using simple elements, such as gates and muxes Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181221160239.26265-5-jbrunet@baylibre.com 2018-12-21 19:02:38 +03:00			`obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o`
clk: meson-axg: Add AO Clock and Reset controller driver Adds a Clock and Reset controller driver for the Always-On part of the Amlogic Meson-AXG SoC. Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> 2018-05-03 16:26:23 +03:00			`obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o`
clk: meson: axg: add the audio clock controller driver The axg audio clock controller is the clock generation unit for the amlogic audio subsystem of A113 based SoCs. It may be clocked by 8 different plls provided by the primary clock controller and also by 10 slave bit clocks and 10 slave sample clocks which may be provided by external components, such as audio codecs, through the SoC pads. It contains several muxes, dividers and gates which are fed into the the different devices of the audio subsystem. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> 2018-05-22 19:34:57 +03:00			`obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o`
clk: meson: add regmap clocks Meson clock controllers need to move the classical iomem registers to regmap. This is triggered because the HHI controllers found on the GXBB and GXL host more than just clocks. To properly handle this, we would like to migrate HHI to syscon. Also GXBB AO clock controller already use regmap, AXG AO and Audio clock controllers will as well. The purpose of this change is to provide a common structure to these meson controllers (and possibly others) for regmap based clocks. This change provides the basic gate, mux and divider, based on the helpers provided by the related generic clocks Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2018-02-12 17:58:32 +03:00			`obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o`