WSL2-Linux-Kernel/drivers/net/usb/qmi_wwan.c

583 строки
20 KiB
C
Исходник Обычный вид История

/*
* Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
#include <linux/usb/cdc-wdm.h>
/* The name of the CDC Device Management driver */
#define DM_DRIVER "cdc_wdm"
/*
* This driver supports wwan (3G/LTE/?) devices using a vendor
* specific management protocol called Qualcomm MSM Interface (QMI) -
* in addition to the more common AT commands over serial interface
* management
*
* QMI is wrapped in CDC, using CDC encapsulated commands on the
* control ("master") interface of a two-interface CDC Union
* resembling standard CDC ECM. The devices do not use the control
* interface for any other CDC messages. Most likely because the
* management protocol is used in place of the standard CDC
* notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE
*
* Handling a protocol like QMI is out of the scope for any driver.
* It can be exported as a character device using the cdc-wdm driver,
* which will enable userspace applications ("modem managers") to
* handle it. This may be required to use the network interface
* provided by the driver.
*
* These devices may alternatively/additionally be configured using AT
* commands on any of the serial interfaces driven by the option driver
*
* This driver binds only to the data ("slave") interface to enable
* the cdc-wdm driver to bind to the control interface. It still
* parses the CDC functional descriptors on the control interface to
* a) verify that this is indeed a handled interface (CDC Union
* header lists it as slave)
* b) get MAC address and other ethernet config from the CDC Ethernet
* header
* c) enable user bind requests against the control interface, which
* is the common way to bind to CDC Ethernet Control Model type
* interfaces
* d) provide a hint to the user about which interface is the
* corresponding management interface
*/
static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
{
int status = -1;
struct usb_interface *control = NULL;
u8 *buf = intf->cur_altsetting->extra;
int len = intf->cur_altsetting->extralen;
struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
struct usb_cdc_union_desc *cdc_union = NULL;
struct usb_cdc_ether_desc *cdc_ether = NULL;
u32 required = 1 << USB_CDC_HEADER_TYPE | 1 << USB_CDC_UNION_TYPE;
u32 found = 0;
atomic_t *pmcount = (void *)&dev->data[1];
atomic_set(pmcount, 0);
/*
* assume a data interface has no additional descriptors and
* that the control and data interface are numbered
* consecutively - this holds for the Huawei device at least
*/
if (len == 0 && desc->bInterfaceNumber > 0) {
control = usb_ifnum_to_if(dev->udev, desc->bInterfaceNumber - 1);
if (!control)
goto err;
buf = control->cur_altsetting->extra;
len = control->cur_altsetting->extralen;
dev_dbg(&intf->dev, "guessing \"control\" => %s, \"data\" => this\n",
dev_name(&control->dev));
}
while (len > 3) {
struct usb_descriptor_header *h = (void *)buf;
/* ignore any misplaced descriptors */
if (h->bDescriptorType != USB_DT_CS_INTERFACE)
goto next_desc;
/* buf[2] is CDC descriptor subtype */
switch (buf[2]) {
case USB_CDC_HEADER_TYPE:
if (found & 1 << USB_CDC_HEADER_TYPE) {
dev_dbg(&intf->dev, "extra CDC header\n");
goto err;
}
if (h->bLength != sizeof(struct usb_cdc_header_desc)) {
dev_dbg(&intf->dev, "CDC header len %u\n", h->bLength);
goto err;
}
break;
case USB_CDC_UNION_TYPE:
if (found & 1 << USB_CDC_UNION_TYPE) {
dev_dbg(&intf->dev, "extra CDC union\n");
goto err;
}
if (h->bLength != sizeof(struct usb_cdc_union_desc)) {
dev_dbg(&intf->dev, "CDC union len %u\n", h->bLength);
goto err;
}
cdc_union = (struct usb_cdc_union_desc *)buf;
break;
case USB_CDC_ETHERNET_TYPE:
if (found & 1 << USB_CDC_ETHERNET_TYPE) {
dev_dbg(&intf->dev, "extra CDC ether\n");
goto err;
}
if (h->bLength != sizeof(struct usb_cdc_ether_desc)) {
dev_dbg(&intf->dev, "CDC ether len %u\n", h->bLength);
goto err;
}
cdc_ether = (struct usb_cdc_ether_desc *)buf;
break;
}
/*
* Remember which CDC functional descriptors we've seen. Works
* for all types we care about, of which USB_CDC_ETHERNET_TYPE
* (0x0f) is the highest numbered
*/
if (buf[2] < 32)
found |= 1 << buf[2];
next_desc:
len -= h->bLength;
buf += h->bLength;
}
/* did we find all the required ones? */
if ((found & required) != required) {
dev_err(&intf->dev, "CDC functional descriptors missing\n");
goto err;
}
/* give the user a helpful hint if trying to bind to the wrong interface */
if (cdc_union && desc->bInterfaceNumber == cdc_union->bMasterInterface0) {
dev_err(&intf->dev, "leaving \"control\" interface for " DM_DRIVER " - try binding to %s instead!\n",
dev_name(&usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0)->dev));
goto err;
}
/* errors aren't fatal - we can live with the dynamic address */
if (cdc_ether) {
dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize);
usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress);
}
/* success! point the user to the management interface */
if (control)
dev_info(&intf->dev, "Use \"" DM_DRIVER "\" for QMI interface %s\n",
dev_name(&control->dev));
/* XXX: add a sysfs symlink somewhere to help management applications find it? */
/* collect bulk endpoints now that we know intf == "data" interface */
status = usbnet_get_endpoints(dev, intf);
err:
return status;
}
/* using a counter to merge subdriver requests with our own into a combined state */
static int qmi_wwan_manage_power(struct usbnet *dev, int on)
{
atomic_t *pmcount = (void *)&dev->data[1];
int rv = 0;
dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(pmcount), on);
if ((on && atomic_add_return(1, pmcount) == 1) || (!on && atomic_dec_and_test(pmcount))) {
/* need autopm_get/put here to ensure the usbcore sees the new value */
rv = usb_autopm_get_interface(dev->intf);
if (rv < 0)
goto err;
dev->intf->needs_remote_wakeup = on;
usb_autopm_put_interface(dev->intf);
}
err:
return rv;
}
static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
{
struct usbnet *dev = usb_get_intfdata(intf);
return qmi_wwan_manage_power(dev, on);
}
/* Some devices combine the "control" and "data" functions into a
* single interface with all three endpoints: interrupt + bulk in and
* out
*
* Setting up cdc-wdm as a subdriver owning the interrupt endpoint
* will let it provide userspace access to the encapsulated QMI
* protocol without interfering with the usbnet operations.
*/
static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf)
{
int rv;
struct usb_driver *subdriver = NULL;
atomic_t *pmcount = (void *)&dev->data[1];
/* ZTE makes devices where the interface descriptors and endpoint
* configurations of two or more interfaces are identical, even
* though the functions are completely different. If set, then
* driver_info->data is a bitmap of acceptable interface numbers
* allowing us to bind to one such interface without binding to
* all of them
*/
if (dev->driver_info->data &&
!test_bit(intf->cur_altsetting->desc.bInterfaceNumber, &dev->driver_info->data)) {
dev_info(&intf->dev, "not on our whitelist - ignored");
rv = -ENODEV;
goto err;
}
atomic_set(pmcount, 0);
/* collect all three endpoints */
rv = usbnet_get_endpoints(dev, intf);
if (rv < 0)
goto err;
/* require interrupt endpoint for subdriver */
if (!dev->status) {
rv = -EINVAL;
goto err;
}
subdriver = usb_cdc_wdm_register(intf, &dev->status->desc, 512, &qmi_wwan_cdc_wdm_manage_power);
if (IS_ERR(subdriver)) {
rv = PTR_ERR(subdriver);
goto err;
}
/* can't let usbnet use the interrupt endpoint */
dev->status = NULL;
/* save subdriver struct for suspend/resume wrappers */
dev->data[0] = (unsigned long)subdriver;
err:
return rv;
}
/* Gobi devices uses identical class/protocol codes for all interfaces regardless
* of function. Some of these are CDC ACM like and have the exact same endpoints
* we are looking for. This leaves two possible strategies for identifying the
* correct interface:
* a) hardcoding interface number, or
* b) use the fact that the wwan interface is the only one lacking additional
* (CDC functional) descriptors
*
* Let's see if we can get away with the generic b) solution.
*/
static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf)
{
int rv = -EINVAL;
/* ignore any interface with additional descriptors */
if (intf->cur_altsetting->extralen)
goto err;
rv = qmi_wwan_bind_shared(dev, intf);
err:
return rv;
}
static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf)
{
struct usb_driver *subdriver = (void *)dev->data[0];
if (subdriver && subdriver->disconnect)
subdriver->disconnect(intf);
dev->data[0] = (unsigned long)NULL;
}
/* suspend/resume wrappers calling both usbnet and the cdc-wdm
* subdriver if present.
*
* NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
* wrappers for those without adding usbnet reset support first.
*/
static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
struct usb_driver *subdriver = (void *)dev->data[0];
int ret;
ret = usbnet_suspend(intf, message);
if (ret < 0)
goto err;
if (subdriver && subdriver->suspend)
ret = subdriver->suspend(intf, message);
if (ret < 0)
usbnet_resume(intf);
err:
return ret;
}
static int qmi_wwan_resume(struct usb_interface *intf)
{
struct usbnet *dev = usb_get_intfdata(intf);
struct usb_driver *subdriver = (void *)dev->data[0];
int ret = 0;
if (subdriver && subdriver->resume)
ret = subdriver->resume(intf);
if (ret < 0)
goto err;
ret = usbnet_resume(intf);
if (ret < 0 && subdriver && subdriver->resume && subdriver->suspend)
subdriver->suspend(intf, PMSG_SUSPEND);
err:
return ret;
}
static const struct driver_info qmi_wwan_info = {
.description = "QMI speaking wwan device",
.flags = FLAG_WWAN,
.bind = qmi_wwan_bind,
.manage_power = qmi_wwan_manage_power,
};
static const struct driver_info qmi_wwan_shared = {
.description = "QMI speaking wwan device with combined interface",
.flags = FLAG_WWAN,
.bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
};
static const struct driver_info qmi_wwan_gobi = {
.description = "Qualcomm Gobi wwan/QMI device",
.flags = FLAG_WWAN,
.bind = qmi_wwan_bind_gobi,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
};
/* ZTE suck at making USB descriptors */
static const struct driver_info qmi_wwan_force_int1 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
.bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
.data = BIT(1), /* interface whitelist bitmap */
};
static const struct driver_info qmi_wwan_force_int4 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
.bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
.data = BIT(4), /* interface whitelist bitmap */
};
/* Sierra Wireless provide equally useless interface descriptors
* Devices in QMI mode can be switched between two different
* configurations:
* a) USB interface #8 is QMI/wwan
* b) USB interfaces #8, #19 and #20 are QMI/wwan
*
* Both configurations provide a number of other interfaces (serial++),
* some of which have the same endpoint configuration as we expect, so
* a whitelist or blacklist is necessary.
*
* FIXME: The below whitelist should include BIT(20). It does not
* because I cannot get it to work...
*/
static const struct driver_info qmi_wwan_sierra = {
.description = "Sierra Wireless wwan/QMI device",
.flags = FLAG_WWAN,
.bind = qmi_wwan_bind_gobi,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
.data = BIT(8) | BIT(19), /* interface whitelist bitmap */
};
#define HUAWEI_VENDOR_ID 0x12D1
#define QMI_GOBI_DEVICE(vend, prod) \
USB_DEVICE(vend, prod), \
.driver_info = (unsigned long)&qmi_wwan_gobi
static const struct usb_device_id products[] = {
{ /* Huawei E392, E398 and possibly others sharing both device id and more... */
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = HUAWEI_VENDOR_ID,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 8, /* NOTE: This is the *slave* interface of the CDC Union! */
.driver_info = (unsigned long)&qmi_wwan_info,
},
{ /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = HUAWEI_VENDOR_ID,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 56, /* NOTE: This is the *slave* interface of the CDC Union! */
.driver_info = (unsigned long)&qmi_wwan_info,
},
{ /* Huawei E392, E398 and possibly others in "Windows mode"
* using a combined control and data interface without any CDC
* functional descriptors
*/
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = HUAWEI_VENDOR_ID,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 17,
.driver_info = (unsigned long)&qmi_wwan_shared,
},
{ /* Pantech UML290 */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x106c,
.idProduct = 0x3718,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = 0xf0,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_shared,
},
{ /* ZTE MF820D */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x19d2,
.idProduct = 0x0167,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = 0xff,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
{ /* ZTE (Vodafone) K3520-Z */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x19d2,
.idProduct = 0x0055,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = 0xff,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int1,
},
{ /* ZTE (Vodafone) K3565-Z */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x19d2,
.idProduct = 0x0063,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = 0xff,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
{ /* ZTE (Vodafone) K3570-Z */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x19d2,
.idProduct = 0x1008,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = 0xff,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
{ /* ZTE (Vodafone) K3571-Z */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x19d2,
.idProduct = 0x1010,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = 0xff,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
{ /* ZTE (Vodafone) K3765-Z */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x19d2,
.idProduct = 0x2002,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = 0xff,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
{ /* ZTE (Vodafone) K4505-Z */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x19d2,
.idProduct = 0x0104,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = 0xff,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
{ /* Sierra Wireless MC77xx in QMI mode */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x1199,
.idProduct = 0x68a2,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = 0xff,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_sierra,
},
{QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
{QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
{QMI_GOBI_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
{QMI_GOBI_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
{QMI_GOBI_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
{QMI_GOBI_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
{QMI_GOBI_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
{QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
{QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
{QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */
{QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */
{QMI_GOBI_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */
{QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */
{QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */
{QMI_GOBI_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */
{QMI_GOBI_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9004)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9005)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9006)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9007)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9008)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
{QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
{QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
{QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
{ } /* END */
};
MODULE_DEVICE_TABLE(usb, products);
static struct usb_driver qmi_wwan_driver = {
.name = "qmi_wwan",
.id_table = products,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
.suspend = qmi_wwan_suspend,
.resume = qmi_wwan_resume,
.reset_resume = qmi_wwan_resume,
.supports_autosuspend = 1,
USB: Disable hub-initiated LPM for comms devices. Hub-initiated LPM is not good for USB communications devices. Comms devices should be able to tell when their link can go into a lower power state, because they know when an incoming transmission is finished. Ideally, these devices would slam their links into a lower power state, using the device-initiated LPM, after finishing the last packet of their data transfer. If we enable the idle timeouts for the parent hubs to enable hub-initiated LPM, we will get a lot of useless LPM packets on the bus as the devices reject LPM transitions when they're in the middle of receiving data. Worse, some devices might blindly accept the hub-initiated LPM and power down their radios while they're in the middle of receiving a transmission. The Intel Windows folks are disabling hub-initiated LPM for all USB communications devices under a xHCI USB 3.0 host. In order to keep the Linux behavior as close as possible to Windows, we need to do the same in Linux. Set the disable_hub_initiated_lpm flag for for all USB communications drivers. I know there aren't currently any USB 3.0 devices that implement these class specifications, but we should be ready if they do. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jan Dumon <j.dumon@option.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Kan Yan <kanyan@broadcom.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Herton Ronaldo Krzesinski <herton@canonical.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-04-23 21:08:51 +04:00
.disable_hub_initiated_lpm = 1,
};
static int __init qmi_wwan_init(void)
{
return usb_register(&qmi_wwan_driver);
}
module_init(qmi_wwan_init);
static void __exit qmi_wwan_exit(void)
{
usb_deregister(&qmi_wwan_driver);
}
module_exit(qmi_wwan_exit);
MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver");
MODULE_LICENSE("GPL");