ARM: dts: imx: Add support for Advantech/GE Bx50v3
Advantech has 3 carrier boards (B450v3, B650v3, B850v3) which use the Advantech BA-16 module (based on iMX6D). This file has the devicetree entries that are common to all 3 boards. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Justin Waters
Shawn Guo
Родитель
56c27310c1
Коммит
226d16c80c
|
|
@ -0,0 +1,225 @@
|
|||
/*
|
||||
* Copyright 2015 Timesys Corporation.
|
||||
* Copyright 2015 General Electric Company
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "imx6q-ba16.dtsi"
|
||||
|
||||
/ {
|
||||
clocks {
|
||||
mclk: clock@0 {
|
||||
compatible = "fixed-clock";
|
||||
reg = <0>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <22000000>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_wl18xx_vmmc: regulator-wl18xx {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vwl1807";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_wlan: regulator-wlan {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V_wlan";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "fsl,imx6q-ba16-sgtl5000",
|
||||
"fsl,imx-audio-sgtl5000";
|
||||
model = "imx6q-ba16-sgtl5000";
|
||||
ssi-controller = <&ssi1>;
|
||||
audio-codec = <&sgtl5000>;
|
||||
audio-routing =
|
||||
"MIC_IN", "Mic Jack",
|
||||
"Mic Jack", "Mic Bias",
|
||||
"LINE_IN", "Line In Jack",
|
||||
"Headphone Jack", "HP_OUT";
|
||||
mux-int-port = <1>;
|
||||
mux-ext-port = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&ecspi5 {
|
||||
fsl,spi-num-chipselects = <1>;
|
||||
cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi5>;
|
||||
status = "okay";
|
||||
|
||||
m25_eeprom: m25p80@0 {
|
||||
compatible = "atmel,at25";
|
||||
spi-max-frequency = <20000000>;
|
||||
size = <0x8000>;
|
||||
pagesize = <64>;
|
||||
reg = <0>;
|
||||
address-width = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pca9547: mux@70 {
|
||||
compatible = "nxp,pca9547";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mux1_i2c1: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0>;
|
||||
|
||||
ads7830: ads7830@48 {
|
||||
compatible = "ti,ads7830";
|
||||
reg = <0x48>;
|
||||
};
|
||||
|
||||
mma8453: mma8453@1c {
|
||||
compatible = "fsl,mma8453";
|
||||
reg = <0x1c>;
|
||||
};
|
||||
};
|
||||
|
||||
mux1_i2c2: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x1>;
|
||||
|
||||
eeprom: eeprom@50 {
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
mpl3115: mpl3115@60 {
|
||||
compatible = "fsl,mpl3115";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
mux1_i2c3: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x2>;
|
||||
};
|
||||
|
||||
mux1_i2c4: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x3>;
|
||||
|
||||
sgtl5000: codec@0a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
clocks = <&mclk>;
|
||||
VDDA-supply = <®_1p8v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
};
|
||||
};
|
||||
|
||||
mux1_i2c5: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x4>;
|
||||
|
||||
pca9539: pca9539@74 {
|
||||
compatible = "nxp,pca9539";
|
||||
reg = <0x74>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
mux1_i2c6: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x5>;
|
||||
};
|
||||
|
||||
mux1_i2c7: i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x6>;
|
||||
};
|
||||
|
||||
mux1_i2c8: i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usdhc4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc4>;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <®_wl18xx_vmmc>;
|
||||
no-1-8-v;
|
||||
non-removable;
|
||||
wakeup-source;
|
||||
keep-power-in-suspend;
|
||||
cap-power-off-card;
|
||||
max-frequency = <25000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
wlcore: wlcore@2 {
|
||||
compatible = "ti,wl1837";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
|
||||
tcxo-clock-frequency = <26000000>;
|
||||
};
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче