PCI: pciehp: Ignore Link State Changes after powering off a slot

During a safe hot remove, the OS powers off the slot, which may cause a
Data Link Layer State Changed event.  The slot has already been set to
OFF_STATE, so that event results in re-enabling the device, making it
impossible to safely remove it.

Clear out the Presence Detect Changed and Data Link Layer State Changed
events when the disabled slot has settled down.

It is still possible to re-enable the device if it remains in the slot
after pressing the Attention Button by pressing it again.

Fixes the problem that Micah reported below: an NVMe drive power button may
not actually turn off the drive.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203237
Reported-by: Micah Parrish <micah.parrish@hpe.com>
Tested-by: Micah Parrish <micah.parrish@hpe.com>
Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
[bhelgaas: changelog, add bugzilla URL]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org	# v4.19+
This commit is contained in:
Sergey Miroshnichenko 2019-03-12 15:05:48 +03:00 коммит произвёл Bjorn Helgaas
Родитель 9cde402a59
Коммит 3943af9d01
1 изменённых файлов: 4 добавлений и 0 удалений

Просмотреть файл

@ -115,6 +115,10 @@ static void remove_board(struct controller *ctrl, bool safe_removal)
* removed from the slot/adapter.
*/
msleep(1000);
/* Ignore link or presence changes caused by power off */
atomic_and(~(PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC),
&ctrl->pending_events);
}
/* turn off Green LED */