net: phy: broadcom: extract all registers to brcmphy.h
Commit 439d39a9ac ("net: phy: broadcom:
extract register definitions") added a bunch of registers to brcmphy.h
but left some to broadcom.c, move all of them to the header file since
the BCM54xx and BCM7xxx PHY drivers do share all of these registers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Florian Fainelli
David S. Miller
Родитель
5aa8dbbd5f
Коммит
3af20efc0f
|
|
@ -25,110 +25,6 @@
|
|||
#define BRCM_PHY_REV(phydev) \
|
||||
((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
|
||||
|
||||
/*
|
||||
* Broadcom LED source encodings. These are used in BCM5461, BCM5481,
|
||||
* BCM5482, and possibly some others.
|
||||
*/
|
||||
#define BCM_LED_SRC_LINKSPD1 0x0
|
||||
#define BCM_LED_SRC_LINKSPD2 0x1
|
||||
#define BCM_LED_SRC_XMITLED 0x2
|
||||
#define BCM_LED_SRC_ACTIVITYLED 0x3
|
||||
#define BCM_LED_SRC_FDXLED 0x4
|
||||
#define BCM_LED_SRC_SLAVE 0x5
|
||||
#define BCM_LED_SRC_INTR 0x6
|
||||
#define BCM_LED_SRC_QUALITY 0x7
|
||||
#define BCM_LED_SRC_RCVLED 0x8
|
||||
#define BCM_LED_SRC_MULTICOLOR1 0xa
|
||||
#define BCM_LED_SRC_OPENSHORT 0xb
|
||||
#define BCM_LED_SRC_OFF 0xe /* Tied high */
|
||||
#define BCM_LED_SRC_ON 0xf /* Tied low */
|
||||
|
||||
|
||||
/*
|
||||
* BCM5482: Shadow registers
|
||||
* Shadow values go into bits [14:10] of register 0x1c to select a shadow
|
||||
* register to access.
|
||||
*/
|
||||
/* 00101: Spare Control Register 3 */
|
||||
#define BCM54XX_SHD_SCR3 0x05
|
||||
#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001
|
||||
#define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002
|
||||
#define BCM54XX_SHD_SCR3_TRDDAPD 0x0004
|
||||
|
||||
/* 01010: Auto Power-Down */
|
||||
#define BCM54XX_SHD_APD 0x0a
|
||||
#define BCM54XX_SHD_APD_EN 0x0020
|
||||
|
||||
#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */
|
||||
/* LED3 / ~LINKSPD[2] selector */
|
||||
#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4)
|
||||
/* LED1 / ~LINKSPD[1] selector */
|
||||
#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0)
|
||||
#define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */
|
||||
#define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */
|
||||
#define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */
|
||||
#define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */
|
||||
#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */
|
||||
#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */
|
||||
|
||||
|
||||
/*
|
||||
* EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17)
|
||||
*/
|
||||
#define MII_BCM54XX_EXP_AADJ1CH0 0x001f
|
||||
#define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200
|
||||
#define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100
|
||||
#define MII_BCM54XX_EXP_AADJ1CH3 0x601f
|
||||
#define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002
|
||||
#define MII_BCM54XX_EXP_EXP08 0x0F08
|
||||
#define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001
|
||||
#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200
|
||||
#define MII_BCM54XX_EXP_EXP75 0x0f75
|
||||
#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c
|
||||
#define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001
|
||||
#define MII_BCM54XX_EXP_EXP96 0x0f96
|
||||
#define MII_BCM54XX_EXP_EXP96_MYST 0x0010
|
||||
#define MII_BCM54XX_EXP_EXP97 0x0f97
|
||||
#define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c
|
||||
|
||||
/*
|
||||
* BCM5482: Secondary SerDes registers
|
||||
*/
|
||||
#define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */
|
||||
#define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */
|
||||
#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */
|
||||
#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */
|
||||
#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */
|
||||
|
||||
|
||||
/*****************************************************************************/
|
||||
/* Fast Ethernet Transceiver definitions. */
|
||||
/*****************************************************************************/
|
||||
|
||||
#define MII_BRCM_FET_INTREG 0x1a /* Interrupt register */
|
||||
#define MII_BRCM_FET_IR_MASK 0x0100 /* Mask all interrupts */
|
||||
#define MII_BRCM_FET_IR_LINK_EN 0x0200 /* Link status change enable */
|
||||
#define MII_BRCM_FET_IR_SPEED_EN 0x0400 /* Link speed change enable */
|
||||
#define MII_BRCM_FET_IR_DUPLEX_EN 0x0800 /* Duplex mode change enable */
|
||||
#define MII_BRCM_FET_IR_ENABLE 0x4000 /* Interrupt enable */
|
||||
|
||||
#define MII_BRCM_FET_BRCMTEST 0x1f /* Brcm test register */
|
||||
#define MII_BRCM_FET_BT_SRE 0x0080 /* Shadow register enable */
|
||||
|
||||
|
||||
/*** Shadow register definitions ***/
|
||||
|
||||
#define MII_BRCM_FET_SHDW_MISCCTRL 0x10 /* Shadow misc ctrl */
|
||||
#define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */
|
||||
|
||||
#define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */
|
||||
#define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003
|
||||
#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001
|
||||
|
||||
#define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */
|
||||
#define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */
|
||||
|
||||
|
||||
MODULE_DESCRIPTION("Broadcom PHY driver");
|
||||
MODULE_AUTHOR("Maciej W. Rozycki");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
|
|||
|
|
@ -92,4 +92,107 @@
|
|||
|
||||
#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000
|
||||
|
||||
/*
|
||||
* Broadcom LED source encodings. These are used in BCM5461, BCM5481,
|
||||
* BCM5482, and possibly some others.
|
||||
*/
|
||||
#define BCM_LED_SRC_LINKSPD1 0x0
|
||||
#define BCM_LED_SRC_LINKSPD2 0x1
|
||||
#define BCM_LED_SRC_XMITLED 0x2
|
||||
#define BCM_LED_SRC_ACTIVITYLED 0x3
|
||||
#define BCM_LED_SRC_FDXLED 0x4
|
||||
#define BCM_LED_SRC_SLAVE 0x5
|
||||
#define BCM_LED_SRC_INTR 0x6
|
||||
#define BCM_LED_SRC_QUALITY 0x7
|
||||
#define BCM_LED_SRC_RCVLED 0x8
|
||||
#define BCM_LED_SRC_MULTICOLOR1 0xa
|
||||
#define BCM_LED_SRC_OPENSHORT 0xb
|
||||
#define BCM_LED_SRC_OFF 0xe /* Tied high */
|
||||
#define BCM_LED_SRC_ON 0xf /* Tied low */
|
||||
|
||||
|
||||
/*
|
||||
* BCM5482: Shadow registers
|
||||
* Shadow values go into bits [14:10] of register 0x1c to select a shadow
|
||||
* register to access.
|
||||
*/
|
||||
/* 00101: Spare Control Register 3 */
|
||||
#define BCM54XX_SHD_SCR3 0x05
|
||||
#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001
|
||||
#define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002
|
||||
#define BCM54XX_SHD_SCR3_TRDDAPD 0x0004
|
||||
|
||||
/* 01010: Auto Power-Down */
|
||||
#define BCM54XX_SHD_APD 0x0a
|
||||
#define BCM54XX_SHD_APD_EN 0x0020
|
||||
|
||||
#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */
|
||||
/* LED3 / ~LINKSPD[2] selector */
|
||||
#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4)
|
||||
/* LED1 / ~LINKSPD[1] selector */
|
||||
#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0)
|
||||
#define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */
|
||||
#define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */
|
||||
#define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */
|
||||
#define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */
|
||||
#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */
|
||||
#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */
|
||||
|
||||
|
||||
/*
|
||||
* EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17)
|
||||
*/
|
||||
#define MII_BCM54XX_EXP_AADJ1CH0 0x001f
|
||||
#define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200
|
||||
#define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100
|
||||
#define MII_BCM54XX_EXP_AADJ1CH3 0x601f
|
||||
#define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002
|
||||
#define MII_BCM54XX_EXP_EXP08 0x0F08
|
||||
#define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001
|
||||
#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200
|
||||
#define MII_BCM54XX_EXP_EXP75 0x0f75
|
||||
#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c
|
||||
#define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001
|
||||
#define MII_BCM54XX_EXP_EXP96 0x0f96
|
||||
#define MII_BCM54XX_EXP_EXP96_MYST 0x0010
|
||||
#define MII_BCM54XX_EXP_EXP97 0x0f97
|
||||
#define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c
|
||||
|
||||
/*
|
||||
* BCM5482: Secondary SerDes registers
|
||||
*/
|
||||
#define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */
|
||||
#define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */
|
||||
#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */
|
||||
#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */
|
||||
#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */
|
||||
|
||||
|
||||
/*****************************************************************************/
|
||||
/* Fast Ethernet Transceiver definitions. */
|
||||
/*****************************************************************************/
|
||||
|
||||
#define MII_BRCM_FET_INTREG 0x1a /* Interrupt register */
|
||||
#define MII_BRCM_FET_IR_MASK 0x0100 /* Mask all interrupts */
|
||||
#define MII_BRCM_FET_IR_LINK_EN 0x0200 /* Link status change enable */
|
||||
#define MII_BRCM_FET_IR_SPEED_EN 0x0400 /* Link speed change enable */
|
||||
#define MII_BRCM_FET_IR_DUPLEX_EN 0x0800 /* Duplex mode change enable */
|
||||
#define MII_BRCM_FET_IR_ENABLE 0x4000 /* Interrupt enable */
|
||||
|
||||
#define MII_BRCM_FET_BRCMTEST 0x1f /* Brcm test register */
|
||||
#define MII_BRCM_FET_BT_SRE 0x0080 /* Shadow register enable */
|
||||
|
||||
|
||||
/*** Shadow register definitions ***/
|
||||
|
||||
#define MII_BRCM_FET_SHDW_MISCCTRL 0x10 /* Shadow misc ctrl */
|
||||
#define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */
|
||||
|
||||
#define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */
|
||||
#define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003
|
||||
#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001
|
||||
|
||||
#define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */
|
||||
#define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */
|
||||
|
||||
#endif /* _LINUX_BRCMPHY_H */
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче