microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

i.MX arm64 device tree update for 5.12: 

- New board support: Beacon i.MX8M Nano development kit, i.MX8MM Nitrogen,
   Gateworks i.MX 8M Mini Development Kits, phyBOARD-Pollux-i.MX8MP,
   Librem5 Evergreen.
 - Update imx8mm-beacon to drop unused clock-names reference, and add
   more pinctrl states for USDHC1.
 - Support soc unique ID read with NVMEM on i.MX8M SoCs.
 - A series from Biwen Li to add interrupt line for RTC device on
   Layerscape SoCs.
 - A couple of patch sets to update imx8mq-librem5 support around
   regulators, RTC, charger, display, etc.
 - A series from Joakim Zhang to improve i.MX8M FEC device configuration.
 - A series from Kuldeep Singh to enable flexcan support for LX2160A and
   LS1028A.
 - A series from Lucas Stach to update ZII devices around audio, USB, I2C
   pin configuration and UCS1002 ALERT.
 - A series from Michael Walle to update Layerscape device trees to use
   constants in the clockgen phandle, add sl28 variant 1 and enable SATA.
 - A few patches from Russell King to improve support for a couple of
   LX2160A boards.
 - A series from Shengjiu Wang to add more audio support for imx8mn-evk.
 - Other small and random updates.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAboLUUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM7uogf8CiWlrW3nvc/IQczBsgqr0QpFFVY/
 z5Le9xqsIa7ZEdA2tVryi8IyH4BSrpwPANk2aGgb2L9Ktjs8N8KC+RnQ2OZrIyDk
 m3dY0lnAYcfYFVUyJDVQHz4AJLHHfbMRjT25NRrxrUVSXxaPbaFlLlk1bT+TCTNx
 lPavxy+ch60JYET85ZYgM9A1mqKfhAxNMr7JNJODWjoQTNDQy88K2zymVYYaZZ0p
 2xMJ7dnuNleAdU3ndaG3K7G9hv0SlfAlR+TdKzgYTE7S0e4W6phwH37Nu3XnT3SY
 ToBqv/qSx1Hv1LAuLTMAWIOZiKoOVq1kqdgMR7d1+gsKi6QlIPGC92BvFw==
 =ajVN
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.12:

- New board support: Beacon i.MX8M Nano development kit, i.MX8MM Nitrogen,
  Gateworks i.MX 8M Mini Development Kits, phyBOARD-Pollux-i.MX8MP,
  Librem5 Evergreen.
- Update imx8mm-beacon to drop unused clock-names reference, and add
  more pinctrl states for USDHC1.
- Support soc unique ID read with NVMEM on i.MX8M SoCs.
- A series from Biwen Li to add interrupt line for RTC device on
  Layerscape SoCs.
- A couple of patch sets to update imx8mq-librem5 support around
  regulators, RTC, charger, display, etc.
- A series from Joakim Zhang to improve i.MX8M FEC device configuration.
- A series from Kuldeep Singh to enable flexcan support for LX2160A and
  LS1028A.
- A series from Lucas Stach to update ZII devices around audio, USB, I2C
  pin configuration and UCS1002 ALERT.
- A series from Michael Walle to update Layerscape device trees to use
  constants in the clockgen phandle, add sl28 variant 1 and enable SATA.
- A few patches from Russell King to improve support for a couple of
  LX2160A boards.
- A series from Shengjiu Wang to add more audio support for imx8mn-evk.
- Other small and random updates.

* tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits)
  arm64: dts: imx: Add i.mx8mm nitrogen basic dts support
  arm64: dts: zii-rmb3: enable RMI4 reduced reporting
  arm64: dts: zii-ultra: only trigger IRQ on falling edge ucs1002 ALERT pin
  arm64: dts: zii-ultra: limit USB ports to USB2 speed
  arm64: dts: zii-ultra: fix i2c pin configuration
  arm64: dts: zii-ultra: add sound support
  arm64: dts: ls1028a: Enable flexcan support for LS1028A-RDB/QDS
  arm64: dts: ls1028a: Update flexcan properties
  arm64: dts: lx2160a: Add flexcan support
  arm64: dts: fsl-ls1012a-frdm: add spi-uart device
  arm64: dts: fsl-ls1012a-rdb: add i2c devices
  arm64: dts: imx8mn-beacon-som: Enable QSPI on SOM
  arm64: dts: imx8mn: Add fspi node
  arm64: dts: Add Librem5 Evergreen
  arm64: dts: imx8mq-librem5: set regulators boot-on
  arm64: dts: imx8mq-librem5: enable the LCD panel
  arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator
  arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger
  arm64: dts: imx8mq-librem5: Don't mark buck3 as always on
  arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z
  ...

Link: https://lore.kernel.org/r/20210204120150.26186-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2021-02-09 18:03:39 +01:00
Родитель 48a60549d2 da1a6b8bec
Коммит 60c9579a01
54 изменённых файлов: 4542 добавлений и 274 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

8
arch/arm64/boot/dts/freescale/Makefile
Просмотреть файл

@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
@ -33,16 +34,23 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb

21
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
Просмотреть файл

@ -7,6 +7,7 @@
*/
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
#include "fsl-ls1012a.dtsi"
/ {
@ -57,6 +58,26 @@
};
};
&dspi {
bus-num = <0>;
status = "okay";
serial@0 {
compatible = "nxp,sc16is740";
reg = <0>;
spi-max-frequency = <4000000>;
clocks = <&sc16is7xx_clk>;
interrupt-parent = <&gpio1>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
sc16is7xx_clk: clock-sc16is7xx {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
};
&duart0 {
status = "okay";
};

5
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
Просмотреть файл

@ -13,6 +13,11 @@
model = "LS1012A QDS Board";
compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
aliases {
mmc0 = &esdhc0;
mmc1 = &esdhc1;
};
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;

50
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
Просмотреть файл

@ -7,11 +7,17 @@
*/
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
#include "fsl-ls1012a.dtsi"
/ {
model = "LS1012A RDB Board";
compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
aliases {
mmc0 = &esdhc0;
mmc1 = &esdhc1;
};
};
&duart0 {
@ -33,6 +39,50 @@
&i2c0 {
status = "okay";
accelerometer@1e {
compatible = "nxp,fxos8700";
reg = <0x1e>;
interrupt-parent = <&gpio26>;
interrupts = <13 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "INT1";
};
gyroscope@20 {
compatible = "nxp,fxas21002c";
reg = <0x20>;
};
gpio@24 {
compatible = "nxp,pcal9555a";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@25 {
compatible = "nxp,pcal9555a";
reg = <0x25>;
gpio-controller;
#gpio-cells = <2>;
};
gpio26: gpio@26 {
compatible = "nxp,pcal9555a";
reg = <0x26>;
interrupt-parent = <&gpio0>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
current-sensor@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <2000>;
};
};
&qspi {

60
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
Просмотреть файл

@ -7,6 +7,7 @@
*
*/
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@ -34,7 +35,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
#cooling-cells = <2>;
cpu-idle-states = <&CPU_PH20>;
};
@ -148,7 +149,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 0>, <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@ -156,7 +160,8 @@
compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <0 62 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@ -174,7 +179,8 @@
compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
reg = <0x0 0x1580000 0x0 0x10000>;
interrupts = <0 65 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@ -341,7 +347,8 @@
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -351,7 +358,8 @@
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -362,7 +370,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@ -372,7 +381,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@ -380,7 +390,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@ -409,7 +420,7 @@
"fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
big-endian;
};
@ -418,8 +429,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b50000 0x0 0x10000>;
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>,
<&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 47>,
@ -432,8 +449,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b60000 0x0 0x10000>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>,
<&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 45>,
@ -453,8 +476,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
clocks = <&clockgen 4 3>,
<&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
};
usb0: usb@2f00000 {
@ -473,7 +498,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
dma-coherent;
status = "disabled";
};

4
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
Просмотреть файл

@ -107,3 +107,7 @@
ethernet = <&enetc_port2>;
status = "okay";
};
&sata {
status = "okay";
};

62
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts Normal file
Просмотреть файл

@ -0,0 +1,62 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Device Tree file for the Kontron SMARC-sAL28 board.
*
* This is for the network variant 1 which has one ethernet port. It is
* different than the base variant, which also has one port, but here the
* port is connected via RGMII. This port is not TSN aware.
* None of the four SerDes lanes are used by the module, instead they are
* all led out to the carrier for customer use.
*
* Copyright (C) 2020 Michael Walle <michael@walle.cc>
*
*/
/dts-v1/;
#include "fsl-ls1028a-kontron-sl28.dts"
#include <dt-bindings/net/qca-ar803x.h>
/ {
model = "Kontron SMARC-sAL28 (4 Lanes)";
compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
};
&enetc_port0 {
status = "disabled";
/*
* Delete both the phy-handle to the old phy0 label as well as
* the mdio node with the old phy node with the old phy0 label.
*/
/delete-property/ phy-handle;
/delete-node/ mdio;
};
&enetc_port1 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@4 {
reg = <0x4>;
eee-broken-1000t;
eee-broken-100tx;
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
vddio-supply = <&vddh>;
vddio: vddio-regulator {
regulator-name = "VDDIO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddh: vddh-regulator {
regulator-name = "VDDH";
};
};
};
};

5
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
Просмотреть файл

@ -8,6 +8,8 @@
*/
/dts-v1/;
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls1028a-kontron-sl28.dts"
/ {
@ -120,7 +122,8 @@
mclk: clock-mclk@f130080 {
compatible = "fsl,vf610-sai-clock";
reg = <0x0 0xf130080 0x0 0x80>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
#clock-cells = <0>;
};
};

8
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
Просмотреть файл

@ -109,6 +109,14 @@
};
};
&can0 {
status = "okay";
};
&can1 {
status = "okay";
};
&dspi0 {
bus-num = <0>;
status = "okay";

16
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
Просмотреть файл

@ -85,6 +85,22 @@
};
};
&can0 {
status = "okay";
can-transceiver {
max-bitrate = <5000000>;
};
};
&can1 {
status = "okay";
can-transceiver {
max-bitrate = <5000000>;
};
};
&esdhc {
sd-uhs-sdr104;
sd-uhs-sdr50;

182
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
Просмотреть файл

@ -8,6 +8,7 @@
*
*/
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@ -30,7 +31,7 @@
compatible = "arm,cortex-a72";
reg = <0x0>;
enable-method = "psci";
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@ -41,7 +42,7 @@
compatible = "arm,cortex-a72";
reg = <0x1>;
enable-method = "psci";
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@ -205,9 +206,20 @@
};
dcfg: syscon@1e00000 {
compatible = "fsl,ls1028a-dcfg", "syscon";
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd";
reg = <0x0 0x1e00000 0x0 0x10000>;
ranges = <0x0 0x0 0x1e00000 0x10000>;
little-endian;
fspi_clk: clock-controller@900 {
compatible = "fsl,ls1028a-flexspi-clk";
reg = <0x900 0x4>;
#clock-cells = <0>;
clocks = <&clockgen QORIQ_CLK_HWACCEL 0>;
clock-output-names = "fspi_clk";
};
};
rst: syscon@1e60000 {
@ -235,7 +247,8 @@
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -245,7 +258,8 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -255,7 +269,8 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -265,7 +280,8 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -275,7 +291,8 @@
#size-cells = <0>;
reg = <0x0 0x2040000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -285,7 +302,8 @@
#size-cells = <0>;
reg = <0x0 0x2050000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -295,7 +313,8 @@
#size-cells = <0>;
reg = <0x0 0x2060000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -305,7 +324,8 @@
#size-cells = <0>;
reg = <0x0 0x2070000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -317,7 +337,7 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 2 0>, <&clockgen 2 0>;
clocks = <&fspi_clk>, <&fspi_clk>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
@ -329,7 +349,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 62>, <&edma0 0 60>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
@ -344,7 +365,8 @@
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 58>, <&edma0 0 56>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
@ -359,7 +381,8 @@
reg = <0x0 0x2120000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 54>, <&edma0 0 2>;
dma-names = "tx", "rx";
spi-num-chipselects = <3>;
@ -372,7 +395,7 @@
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
clocks = <&clockgen 2 1>;
clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@ -385,7 +408,7 @@
reg = <0x0 0x2150000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
clocks = <&clockgen 2 1>;
clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
broken-cd;
@ -395,19 +418,25 @@
};
can0: can@2180000 {
compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
compatible = "fsl,lx2160ar1-flexcan";
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sysclk>, <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg", "per";
status = "disabled";
};
can1: can@2190000 {
compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
compatible = "fsl,lx2160ar1-flexcan";
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sysclk>, <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg", "per";
status = "disabled";
};
@ -416,7 +445,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -424,7 +454,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -433,7 +464,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2260000 0x0 0x1000>;
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 32>,
@ -445,7 +477,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2270000 0x0 0x1000>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 30>,
@ -457,7 +490,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2280000 0x0 0x1000>;
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 28>,
@ -469,7 +503,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2290000 0x0 0x1000>;
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 26>,
@ -481,7 +516,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x22a0000 0x0 0x1000>;
interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 24>,
@ -493,7 +529,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x22b0000 0x0 0x1000>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 22>,
@ -512,8 +549,10 @@
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
clock-names = "dmamux0", "dmamux1";
clocks = <&clockgen 4 1>,
<&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
};
gpio1: gpio@2300000 {
@ -575,7 +614,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -747,14 +787,20 @@
cluster1_core0_watchdog: watchdog@c000000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: watchdog@c010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
@ -763,8 +809,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf100000 0x0 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 4>,
@ -778,8 +830,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf110000 0x0 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 6>,
@ -793,8 +851,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf120000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 8>,
@ -808,8 +872,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf130000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 10>,
@ -823,8 +893,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf140000 0x0 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 12>,
@ -838,8 +914,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf150000 0x0 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 14>,
@ -960,7 +1042,7 @@
ethernet@0,4 {
compatible = "fsl,enetc-ptp";
reg = <0x000400 0 0 0 0>;
clocks = <&clockgen 2 3>;
clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
little-endian;
fsl,extts-fifo;
};
@ -1055,8 +1137,10 @@
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "DE", "SE";
clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
<&clockgen 2 2>;
clocks = <&dpclk>,
<&clockgen QORIQ_CLK_HWACCEL 2>,
<&clockgen QORIQ_CLK_HWACCEL 2>,
<&clockgen QORIQ_CLK_HWACCEL 2>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
arm,malidp-arqos-value = <0xd000d000>;

98
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
Просмотреть файл

@ -8,6 +8,7 @@
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@ -44,7 +45,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@ -54,7 +55,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@ -64,7 +65,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@ -74,7 +75,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@ -311,6 +312,31 @@
compatible = "fsl,ls1043a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x1570000 0x10000>;
extirq: interrupt-controller@1ac {
compatible = "fsl,ls1043a-extirq";
#interrupt-cells = <2>;
#address-cells = <0>;
interrupt-controller;
reg = <0x1ac 4>;
interrupt-map =
<0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
<3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0xffffffff 0x0>;
};
};
crypto: crypto@1700000 {
@ -377,7 +403,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <0 99 0x4>;
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 0>, <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@ -476,7 +505,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 64 0x4>;
clock-names = "dspi";
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@ -489,7 +519,8 @@
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <0 65 0x4>;
clock-names = "dspi";
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@ -502,7 +533,8 @@
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 0x4>;
clock-names = "i2c";
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
@ -516,7 +548,8 @@
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <0 57 0x4>;
clock-names = "i2c";
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@ -527,7 +560,8 @@
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <0 58 0x4>;
clock-names = "i2c";
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@ -538,7 +572,8 @@
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <0 59 0x4>;
clock-names = "i2c";
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@ -546,28 +581,32 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <0 54 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
};
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <0 54 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
};
duart2: serial@21d0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <0 55 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
};
duart3: serial@21d0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <0 55 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
};
gpio1: gpio@2300000 {
@ -679,7 +718,7 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <0 48 0x4>;
clocks = <&clockgen 0 0>;
clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
clock-names = "ipg";
status = "disabled";
};
@ -688,7 +727,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <0 49 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@ -697,7 +737,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <0 50 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@ -706,7 +747,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <0 51 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@ -715,7 +757,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <0 52 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@ -724,7 +767,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <0 53 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@ -733,7 +777,8 @@
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <0 83 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "wdog";
big-endian;
};
@ -750,8 +795,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
clocks = <&clockgen 4 0>,
<&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
};
usb0: usb@2f00000 {
@ -793,7 +840,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 0x4>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
dma-coherent;
};

3
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
Просмотреть файл

@ -3,6 +3,7 @@
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
* Copyright 2019-2020 NXP
*
* Mingkai Hu <mingkai.hu@nxp.com>
*/
@ -74,6 +75,8 @@
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
/* IRQ_RTC_B -> IRQ05, active low */
interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
};
};

98
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
Просмотреть файл

@ -8,6 +8,7 @@
* Mingkai Hu <mingkai.hu@nxp.com>
*/
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@ -39,7 +40,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@ -49,7 +50,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x1>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@ -59,7 +60,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x2>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@ -69,7 +70,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x3>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@ -295,7 +296,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -303,7 +307,7 @@
compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 2 1>;
clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@ -314,6 +318,31 @@
compatible = "fsl,ls1046a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x1570000 0x10000>;
extirq: interrupt-controller@1ac {
compatible = "fsl,ls1046a-extirq", "fsl,ls1043a-extirq";
#interrupt-cells = <2>;
#address-cells = <0>;
interrupt-controller;
reg = <0x1ac 4>;
interrupt-map =
<0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
<3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0xffffffff 0x0>;
};
};
crypto: crypto@1700000 {
@ -454,7 +483,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@ -466,7 +496,8 @@
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
@ -479,7 +510,8 @@
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -489,7 +521,8 @@
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -499,7 +532,8 @@
#size-cells = <0>;
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -507,7 +541,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -515,7 +550,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -523,7 +559,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -531,7 +568,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@ -579,7 +617,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@ -588,7 +627,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@ -597,7 +637,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@ -606,7 +647,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@ -615,7 +657,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@ -624,7 +667,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@ -633,7 +677,8 @@
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
big-endian;
};
@ -649,8 +694,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
clocks = <&clockgen 4 1>,
<&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
};
usb0: usb@2f00000 {
@ -689,7 +736,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
};
msi1: msi-controller@1580000 {

6
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
Просмотреть файл

@ -2,7 +2,7 @@
/*
* Device Tree file for NXP LS1088A RDB Board.
*
* Copyright 2017 NXP
* Copyright 2017-2020 NXP
*
* Harninder Rai <harninder.rai@nxp.com>
*
@ -158,8 +158,8 @@
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
/* IRQ10_B */
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
/* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
};
};
};

122
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
Просмотреть файл

@ -7,6 +7,7 @@
* Harninder Rai <harninder.rai@nxp.com>
*
*/
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@ -30,7 +31,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@ -39,7 +40,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@ -48,7 +49,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@ -57,7 +58,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@ -66,7 +67,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x100>;
clocks = <&clockgen 1 1>;
clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@ -75,7 +76,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x101>;
clocks = <&clockgen 1 1>;
clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@ -84,7 +85,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x102>;
clocks = <&clockgen 1 1>;
clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@ -93,7 +94,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x103>;
clocks = <&clockgen 1 1>;
clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@ -220,6 +221,37 @@
little-endian;
};
isc: syscon@1f70000 {
compatible = "fsl,ls1088a-isc", "syscon";
reg = <0x0 0x1f70000 0x0 0x10000>;
little-endian;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x1f70000 0x10000>;
extirq: interrupt-controller@14 {
compatible = "fsl,ls1088a-extirq";
#interrupt-cells = <2>;
#address-cells = <0>;
interrupt-controller;
reg = <0x14 4>;
interrupt-map =
<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0xffffffff 0x0>;
};
};
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
@ -279,7 +311,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
spi-num-chipselects = <6>;
status = "disabled";
};
@ -287,7 +320,8 @@
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@ -295,7 +329,8 @@
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@ -360,7 +395,8 @@
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 7>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@ -370,7 +406,8 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 7>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@ -380,7 +417,8 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 7>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@ -390,7 +428,8 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 7>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@ -403,7 +442,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@ -412,7 +454,7 @@
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
clock-frequency = <0>;
clocks = <&clockgen 2 1>;
clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@ -447,7 +489,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@ -698,7 +741,8 @@
ptp-timer@8b95000 {
compatible = "fsl,dpaa2-ptp";
reg = <0x0 0x8b95000 0x0 0x100>;
clocks = <&clockgen 4 0>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
little-endian;
fsl,extts-fifo;
};
@ -787,56 +831,80 @@
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: wdt@c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core2_watchdog: wdt@c020000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc020000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core3_watchdog: wdt@c030000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc030000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core0_watchdog: wdt@c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core1_watchdog: wdt@c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core2_watchdog: wdt@c120000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc120000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core3_watchdog: wdt@c130000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc130000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};

17
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
Просмотреть файл

@ -9,6 +9,7 @@
*
*/
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls208xa.dtsi"
&cpu {
@ -16,7 +17,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@ -26,7 +27,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@ -36,7 +37,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x100>;
clocks = <&clockgen 1 1>;
clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@ -46,7 +47,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x101>;
clocks = <&clockgen 1 1>;
clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@ -56,7 +57,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x200>;
clocks = <&clockgen 1 2>;
clocks = <&clockgen QORIQ_CLK_CMUX 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
@ -66,7 +67,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x201>;
clocks = <&clockgen 1 2>;
clocks = <&clockgen QORIQ_CLK_CMUX 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
@ -76,7 +77,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x300>;
clocks = <&clockgen 1 3>;
clocks = <&clockgen QORIQ_CLK_CMUX 3>;
next-level-cache = <&cluster3_l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@ -86,7 +87,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x301>;
clocks = <&clockgen 1 3>;
clocks = <&clockgen QORIQ_CLK_CMUX 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;

17
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
Просмотреть файл

@ -9,6 +9,7 @@
*
*/
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls208xa.dtsi"
&cpu {
@ -16,7 +17,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@ -26,7 +27,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x1>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@ -36,7 +37,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x100>;
clocks = <&clockgen 1 1>;
clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@ -46,7 +47,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x101>;
clocks = <&clockgen 1 1>;
clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@ -56,7 +57,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x200>;
clocks = <&clockgen 1 2>;
clocks = <&clockgen QORIQ_CLK_CMUX 2>;
next-level-cache = <&cluster2_l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@ -66,7 +67,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x201>;
clocks = <&clockgen 1 2>;
clocks = <&clockgen QORIQ_CLK_CMUX 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
@ -76,7 +77,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x300>;
clocks = <&clockgen 1 3>;
clocks = <&clockgen QORIQ_CLK_CMUX 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;
@ -86,7 +87,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x301>;
clocks = <&clockgen 1 3>;
clocks = <&clockgen QORIQ_CLK_CMUX 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;

4
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
Просмотреть файл

@ -3,7 +3,7 @@
* Device Tree file for Freescale LS2080A RDB Board.
*
* Copyright 2016 Freescale Semiconductor, Inc.
* Copyright 2017 NXP
* Copyright 2017-2020 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
@ -56,6 +56,8 @@
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
/* IRQ_RTC_B -> IRQ06, active low */
interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
};
};

118
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
Просмотреть файл

@ -3,12 +3,13 @@
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
* Copyright 2017 NXP
* Copyright 2017-2020 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
*/
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@ -277,6 +278,37 @@
little-endian;
};
isc: syscon@1f70000 {
compatible = "fsl,ls2080a-isc", "syscon";
reg = <0x0 0x1f70000 0x0 0x10000>;
little-endian;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x1f70000 0x10000>;
extirq: interrupt-controller@14 {
compatible = "fsl,ls2080a-extirq", "fsl,ls1088a-extirq";
#interrupt-cells = <2>;
#address-cells = <0>;
interrupt-controller;
reg = <0x14 4>;
interrupt-map =
<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0xffffffff 0x0>;
};
};
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
@ -325,84 +357,112 @@
serial0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 0x4>; /* Level high type */
};
serial1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 0x4>; /* Level high type */
};
serial2: serial@21d0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 33 0x4>; /* Level high type */
};
serial3: serial@21d0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 33 0x4>; /* Level high type */
};
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: wdt@c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core0_watchdog: wdt@c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core1_watchdog: wdt@c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster3_core0_watchdog: wdt@c200000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc200000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster3_core1_watchdog: wdt@c210000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc210000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster4_core0_watchdog: wdt@c300000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc300000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster4_core1_watchdog: wdt@c310000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc310000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
@ -453,7 +513,8 @@
ptp-timer@8b95000 {
compatible = "fsl,dpaa2-ptp";
reg = <0x0 0x8b95000 0x0 0x100>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
little-endian;
fsl,extts-fifo;
};
@ -864,7 +925,8 @@
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 26 0x4>; /* Level high type */
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <0>;
@ -875,7 +937,8 @@
compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@ -934,7 +997,8 @@
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 0x4>; /* Level high type */
clock-names = "i2c";
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
};
i2c1: i2c@2010000 {
@ -945,7 +1009,8 @@
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 0x4>; /* Level high type */
clock-names = "i2c";
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
};
i2c2: i2c@2020000 {
@ -956,7 +1021,8 @@
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 0x4>; /* Level high type */
clock-names = "i2c";
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
};
i2c3: i2c@2030000 {
@ -967,7 +1033,8 @@
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 0x4>; /* Level high type */
clock-names = "i2c";
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
};
ifc: ifc@2240000 {
@ -991,7 +1058,10 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
@ -1089,7 +1159,8 @@
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
interrupts = <0 133 0x4>; /* Level high type */
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
};
@ -1098,7 +1169,8 @@
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3210000 0x0 0x10000>;
interrupts = <0 136 0x4>; /* Level high type */
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
};

3
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
Просмотреть файл

@ -40,6 +40,7 @@
rgmii_phy1: ethernet-phy@1 {
reg = <1>;
qca,smarteee-tw-us-1g = <24>;
};
};
@ -134,8 +135,6 @@
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
// IRQ10_B
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
};
};

12
arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
Просмотреть файл

@ -8,6 +8,7 @@
/dts-v1/;
#include "fsl-lx2160a-cex7.dtsi"
#include <dt-bindings/input/linux-event-codes.h>
/ {
aliases {
@ -18,6 +19,17 @@
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
key {
label = "power";
linux,can-disable;
linux,code = <KEY_POWER>;
gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
};
};
};
&emdio2 {

10
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
Просмотреть файл

@ -14,6 +14,8 @@
aliases {
crypto = &crypto;
mmc0 = &esdhc0;
mmc1 = &esdhc1;
serial0 = &uart0;
};
@ -31,6 +33,14 @@
};
};
&can0 {
status = "okay";
};
&can1 {
status = "okay";
};
&crypto {
status = "okay";
};

24
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
Просмотреть файл

@ -2,7 +2,7 @@
//
// Device Tree file for LX2160ARDB
//
// Copyright 2018 NXP
// Copyright 2018-2020 NXP
/dts-v1/;
@ -14,6 +14,8 @@
aliases {
crypto = &crypto;
mmc0 = &esdhc0;
mmc1 = &esdhc1;
serial0 = &uart0;
};
@ -87,6 +89,22 @@
};
};
&can0 {
status = "okay";
can-transceiver {
max-bitrate = <5000000>;
};
};
&can1 {
status = "okay";
can-transceiver {
max-bitrate = <5000000>;
};
};
&esdhc0 {
sd-uhs-sdr104;
sd-uhs-sdr50;
@ -175,8 +193,8 @@
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
// IRQ10_B
interrupts = <0 150 0x4>;
/* IRQ_RTC_B -> IRQ08, active low */
interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>;
};
};

147
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
Просмотреть файл

@ -4,6 +4,7 @@
//
// Copyright 2018-2020 NXP
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@ -30,7 +31,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x0>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -47,7 +48,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x1>;
clocks = <&clockgen 1 0>;
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -64,7 +65,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x100>;
clocks = <&clockgen 1 1>;
clocks = <&clockgen QORIQ_CLK_CMUX 1>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -81,7 +82,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x101>;
clocks = <&clockgen 1 1>;
clocks = <&clockgen QORIQ_CLK_CMUX 1>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -98,7 +99,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x200>;
clocks = <&clockgen 1 2>;
clocks = <&clockgen QORIQ_CLK_CMUX 2>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -115,7 +116,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x201>;
clocks = <&clockgen 1 2>;
clocks = <&clockgen QORIQ_CLK_CMUX 2>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -132,7 +133,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x300>;
clocks = <&clockgen 1 3>;
clocks = <&clockgen QORIQ_CLK_CMUX 3>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -149,7 +150,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x301>;
clocks = <&clockgen 1 3>;
clocks = <&clockgen QORIQ_CLK_CMUX 3>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -166,7 +167,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x400>;
clocks = <&clockgen 1 4>;
clocks = <&clockgen QORIQ_CLK_CMUX 4>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -183,7 +184,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x401>;
clocks = <&clockgen 1 4>;
clocks = <&clockgen QORIQ_CLK_CMUX 4>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -200,7 +201,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x500>;
clocks = <&clockgen 1 5>;
clocks = <&clockgen QORIQ_CLK_CMUX 5>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -217,7 +218,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x501>;
clocks = <&clockgen 1 5>;
clocks = <&clockgen QORIQ_CLK_CMUX 5>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -234,7 +235,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x600>;
clocks = <&clockgen 1 6>;
clocks = <&clockgen QORIQ_CLK_CMUX 6>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -251,7 +252,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x601>;
clocks = <&clockgen 1 6>;
clocks = <&clockgen QORIQ_CLK_CMUX 6>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -268,7 +269,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x700>;
clocks = <&clockgen 1 7>;
clocks = <&clockgen QORIQ_CLK_CMUX 7>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -285,7 +286,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x701>;
clocks = <&clockgen 1 7>;
clocks = <&clockgen QORIQ_CLK_CMUX 7>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@ -664,6 +665,37 @@
little-endian;
};
isc: syscon@1f70000 {
compatible = "fsl,lx2160a-isc", "syscon";
reg = <0x0 0x1f70000 0x0 0x10000>;
little-endian;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x1f70000 0x10000>;
extirq: interrupt-controller@14 {
compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq";
#interrupt-cells = <2>;
#address-cells = <0>;
interrupt-controller;
reg = <0x14 4>;
interrupt-map =
<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0xffffffff 0x0>;
};
};
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
@ -685,7 +717,8 @@
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@ -697,7 +730,8 @@
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@ -708,7 +742,8 @@
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@ -719,7 +754,8 @@
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@ -730,7 +766,8 @@
reg = <0x0 0x2040000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@ -742,7 +779,8 @@
reg = <0x0 0x2050000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@ -753,7 +791,8 @@
reg = <0x0 0x2060000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@ -764,7 +803,8 @@
reg = <0x0 0x2070000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 15>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@ -776,7 +816,10 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
<&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
@ -787,7 +830,8 @@
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 7>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(8)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <0>;
@ -800,7 +844,8 @@
#size-cells = <0>;
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 7>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(8)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <1>;
@ -813,7 +858,8 @@
#size-cells = <0>;
reg = <0x0 0x2120000 0x0 0x10000>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 7>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(8)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <2>;
@ -824,7 +870,8 @@
compatible = "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
dma-coherent;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
@ -837,7 +884,8 @@
compatible = "fsl,esdhc";
reg = <0x0 0x2150000 0x0 0x10000>;
interrupts = <0 63 0x4>; /* Level high type */
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
dma-coherent;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
@ -847,6 +895,30 @@
status = "disabled";
};
can0: can@2180000 {
compatible = "fsl,lx2160ar1-flexcan";
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(8)>,
<&clockgen QORIQ_CLK_SYSCLK 0>;
clock-names = "ipg", "per";
fsl,clk-source = <0>;
status = "disabled";
};
can1: can@2190000 {
compatible = "fsl,lx2160ar1-flexcan";
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(8)>,
<&clockgen QORIQ_CLK_SYSCLK 0>;
clock-names = "ipg", "per";
fsl,clk-source = <0>;
status = "disabled";
};
uart0: serial@21c0000 {
compatible = "arm,sbsa-uart","arm,pl011";
reg = <0x0 0x21c0000 0x0 0x1000>;
@ -973,7 +1045,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@ -984,7 +1057,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@ -995,7 +1069,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@ -1006,7 +1081,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@ -1279,7 +1355,8 @@
ptp-timer@8b95000 {
compatible = "fsl,dpaa2-ptp";
reg = <0x0 0x8b95000 0x0 0x100>;
clocks = <&clockgen 4 1>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
little-endian;
fsl,extts-fifo;
};

2
arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
Просмотреть файл

@ -14,6 +14,8 @@
aliases {
crypto = &crypto;
mmc0 = &esdhc0;
mmc1 = &esdhc1;
serial0 = &uart0;
};

1
arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
Просмотреть файл

@ -102,7 +102,6 @@
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
clock-names = "xclk";
DCVDD-supply = <&reg_audio>;
DBVDD-supply = <&reg_audio>;
AVDD-supply = <&reg_audio>;

4
arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
Просмотреть файл

@ -256,8 +256,10 @@
&usdhc1 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <4>;
non-removable;
cap-power-off-card;

393
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts Normal file
Просмотреть файл

@ -0,0 +1,393 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Boundary Devices i.MX8MMini Nitrogen8MM Rev2 board.
* Adrien Grassein <adrien.grassein@gmail.com.com>
*/
/dts-v1/;
#include "imx8mm.dtsi"
/ {
model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2";
compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm";
};
&A53_0 {
cpu-supply = <&reg_buck3>;
};
&A53_1 {
cpu-supply = <&reg_buck3>;
};
&A53_2 {
cpu-supply = <&reg_buck3>;
};
&A53_3 {
cpu-supply = <&reg_buck3>;
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@4 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <4>;
interrupts-extended = <&gpio3 16 IRQ_TYPE_LEVEL_LOW>;
};
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic@8 {
compatible = "nxp,pf8121a";
reg = <0x8>;
regulators {
reg_ldo1: ldo1 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
reg_ldo2: ldo2 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
reg_ldo3: ldo3 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
reg_ldo4: ldo4 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
reg_buck1: buck1 {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_buck2: buck2 {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_buck3: buck3 {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_buck4: buck4 {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_buck5: buck5 {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_buck6: buck6 {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_buck7: buck7 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_vsnvs: vsnvs {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
};
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
i2cmux@70 {
compatible = "nxp,pca9540";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c3 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
compatible = "microcrystal,rv4162";
reg = <0x68>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3a_rv4162>;
interrupts-extended = <&gpio4 22 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
};
};
};
};
/* console */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
assigned-clocks = <&clk IMX8MM_CLK_UART2>;
assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
status = "okay";
};
/* eMMC */
&usdhc1 {
bus-width = <8>;
sdhci-caps-mask = <0x80000000 0x0>;
non-removable;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
status = "okay";
};
/* sdcard */
&usdhc2 {
bus-width = <4>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
vqmmc-supply = <&reg_ldo2>;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x159
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09
MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x09
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
pinctrl_i2c3a_rv4162: i2c3a-rv4162grp {
fsl,pins = <
MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0
MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0
MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0
MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0
MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x141
>;
};
pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4
MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4
MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4
MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4
>;
};
pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6
MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6
MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6
MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x03
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x140
>;
};
};

495
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi Normal file
Просмотреть файл

@ -0,0 +1,495 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2020 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/net/ti-dp83867.h>
/ {
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0x80000000>;
};
gpio-keys {
compatible = "gpio-keys";
user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
interrupts = <0>;
};
key-erased {
label = "key_erased";
linux,code = <BTN_2>;
interrupt-parent = <&gsc>;
interrupts = <1>;
};
eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
interrupts = <7>;
};
};
};
&A53_0 {
cpu-supply = <&buck3_reg>;
};
&A53_1 {
cpu-supply = <&buck3_reg>;
};
&A53_2 {
cpu-supply = <&buck3_reg>;
};
&A53_3 {
cpu-supply = <&buck3_reg>;
};
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
ddrc_opp_table: opp-table {
compatible = "operating-points-v2";
opp-25M {
opp-hz = /bits/ 64 <25000000>;
};
opp-100M {
opp-hz = /bits/ 64 <100000000>;
};
opp-750M {
opp-hz = /bits/ 64 <750000000>;
};
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
pinctrl-0 = <&pinctrl_gsc>;
interrupt-parent = <&gpio2>;
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
#address-cells = <1>;
#size-cells = <0>;
channel@6 {
gw,mode = <0>;
reg = <0x06>;
label = "temp";
};
channel@8 {
gw,mode = <1>;
reg = <0x08>;
label = "vdd_bat";
};
channel@16 {
gw,mode = <4>;
reg = <0x16>;
label = "fan_tach";
};
channel@82 {
gw,mode = <2>;
reg = <0x82>;
label = "vdd_vin";
gw,voltage-divider-ohms = <22100 1000>;
};
channel@84 {
gw,mode = <2>;
reg = <0x84>;
label = "vdd_adc1";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@86 {
gw,mode = <2>;
reg = <0x86>;
label = "vdd_adc2";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@88 {
gw,mode = <2>;
reg = <0x88>;
label = "vdd_dram";
};
channel@8c {
gw,mode = <2>;
reg = <0x8c>;
label = "vdd_1p2";
};
channel@8e {
gw,mode = <2>;
reg = <0x8e>;
label = "vdd_1p0";
};
channel@90 {
gw,mode = <2>;
reg = <0x90>;
label = "vdd_2p5";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@92 {
gw,mode = <2>;
reg = <0x92>;
label = "vdd_3p3";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@98 {
gw,mode = <2>;
reg = <0x98>;
label = "vdd_0p95";
};
channel@9a {
gw,mode = <2>;
reg = <0x9a>;
label = "vdd_1p8";
};
channel@a2 {
gw,mode = <2>;
reg = <0xa2>;
label = "vdd_gsc";
gw,voltage-divider-ohms = <10000 10000>;
};
};
fan-controller@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "gw,gsc-fan";
reg = <0x0a>;
};
};
gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gsc>;
interrupts = <4>;
};
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
pmic@69 {
compatible = "mps,mp5416";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
reg = <0x69>;
regulators {
buck1 {
regulator-name = "vdd_0p95";
regulator-min-microvolt = <805000>;
regulator-max-microvolt = <1000000>;
regulator-max-microamp = <2500000>;
regulator-boot-on;
};
buck2 {
regulator-name = "vdd_soc";
regulator-min-microvolt = <805000>;
regulator-max-microvolt = <900000>;
regulator-max-microamp = <1000000>;
regulator-boot-on;
};
buck3_reg: buck3 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <805000>;
regulator-max-microvolt = <1000000>;
regulator-max-microamp = <2200000>;
regulator-boot-on;
};
buck4 {
regulator-name = "vdd_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-max-microamp = <500000>;
regulator-boot-on;
};
ldo1 {
regulator-name = "nvcc_snvs_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-max-microamp = <300000>;
regulator-boot-on;
};
ldo2 {
regulator-name = "vdd_snvs_0p8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-boot-on;
};
ldo3 {
regulator-name = "vdd_0p95";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-boot-on;
};
ldo4 {
regulator-name = "vdd_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
};
};
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
eeprom@52 {
compatible = "atmel,24c32";
reg = <0x52>;
pagesize = <32>;
};
};
/* console */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
/* eMMC */
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x19
>;
};
pinctrl_gsc: gscgrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x159
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
>;
};
};

19
arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts Normal file
Просмотреть файл

@ -0,0 +1,19 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2020 Gateworks Corporation
*/
/dts-v1/;
#include "imx8mm.dtsi"
#include "imx8mm-venice-gw700x.dtsi"
#include "imx8mm-venice-gw71xx.dtsi"
/ {
model = "Gateworks Venice GW71xx-0x i.MX8MM Development Kit";
compatible = "gw,imx8mm-gw71xx-0x", "fsl,imx8mm";
chosen {
stdout-path = &uart2;
};
};

186
arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi Normal file
Просмотреть файл

@ -0,0 +1,186 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2020 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
aliases {
usb0 = &usbotg1;
usb1 = &usbotg2;
};
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_usb_otg1_vbus: regulator-usb-otg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb1_en>;
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
accelerometer@19 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
compatible = "st,lis2de12";
reg = <0x19>;
st,drdy-int-pin = <1>;
interrupt-parent = <&gpio4>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT1";
};
};
/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* off-board header */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&usbotg1 {
dr_mode = "otg";
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */
MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */
MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */
MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */
MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */
MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000041 /* DIO2 */
MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000041 /* DIO2 */
>;
};
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19
MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
>;
};
pinctrl_reg_usb1_en: regusb1grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41
MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
>;
};
};

20
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts Normal file
Просмотреть файл

@ -0,0 +1,20 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2020 Gateworks Corporation
*/
/dts-v1/;
#include "imx8mm.dtsi"
#include "imx8mm-venice-gw700x.dtsi"
#include "imx8mm-venice-gw72xx.dtsi"
/ {
model = "Gateworks Venice GW72xx-0x i.MX8MM Development Kit";
compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
chosen {
stdout-path = &uart2;
};
};

311
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi Normal file
Просмотреть файл

@ -0,0 +1,311 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2020 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
aliases {
usb0 = &usbotg1;
usb1 = &usbotg2;
};
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg1_vbus: regulator-usb-otg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb1_en>;
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usb_otg2_vbus: regulator-usb-otg2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb2_en>;
compatible = "regulator-fixed";
regulator-name = "usb_otg2_vbus";
gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
accelerometer@19 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
compatible = "st,lis2de12";
reg = <0x19>;
st,drdy-int-pin = <1>;
interrupt-parent = <&gpio4>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT1";
};
};
/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
/* off-board header */
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* off-board header */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
/* RS232 */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbotg1 {
dr_mode = "otg";
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
vbus-supply = <&reg_usb_otg2_vbus>;
status = "okay";
};
/* microSD */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */
MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */
MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */
MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */
MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */
MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */
MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */
MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */
>;
};
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19
MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
>;
};
pinctrl_reg_usb1_en: regusb1grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41
MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41
>;
};
pinctrl_reg_usb2_en: regusb2grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41
>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
>;
};
};

19
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts Normal file
Просмотреть файл

@ -0,0 +1,19 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2020 Gateworks Corporation
*/
/dts-v1/;
#include "imx8mm.dtsi"
#include "imx8mm-venice-gw700x.dtsi"
#include "imx8mm-venice-gw73xx.dtsi"
/ {
model = "Gateworks Venice GW73xx-0x i.MX8MM Development Kit";
compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
chosen {
stdout-path = &uart2;
};
};

362
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi Normal file
Просмотреть файл

@ -0,0 +1,362 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2020 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
aliases {
usb0 = &usbotg1;
usb1 = &usbotg2;
};
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg1_vbus: regulator-usb-otg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb1_en>;
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usb_otg2_vbus: regulator-usb-otg2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb2_en>;
compatible = "regulator-fixed";
regulator-name = "usb_otg2_vbus";
gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_wifi_en: regulator-wifi-en {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_wl>;
compatible = "regulator-fixed";
regulator-name = "wl";
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
startup-delay-us = <100>;
enable-active-high;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
accelerometer@19 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
compatible = "st,lis2de12";
reg = <0x19>;
st,drdy-int-pin = <1>;
interrupt-parent = <&gpio4>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT1";
};
};
/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
/* off-board header */
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* bluetooth HCI */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
bluetooth {
compatible = "brcm,bcm4330-bt";
shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
/* RS232 */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbotg1 {
dr_mode = "otg";
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
vbus-supply = <&reg_usb_otg2_vbus>;
status = "okay";
};
/* SDIO WiFi */
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wifi_en>;
status = "okay";
};
/* microSD */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */
MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */
MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */
MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */
MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */
MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */
MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */
MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */
>;
};
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159
>;
};
pinctrl_bten: btengrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19
MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
>;
};
pinctrl_reg_wl: regwlgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41
>;
};
pinctrl_reg_usb1_en: regusb1grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41
MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41
>;
};
pinctrl_reg_usb2_en: regusb2grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41
>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x140
MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
>;
};
};

23
arch/arm64/boot/dts/freescale/imx8mm.dtsi
Просмотреть файл

@ -257,10 +257,12 @@
};
soc@0 {
compatible = "simple-bus";
compatible = "fsl,imx8mm-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
nvmem-cells = <&imx8mm_uid>;
nvmem-cell-names = "soc_unique_id";
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
@ -518,9 +520,17 @@
#address-cells = <1>;
#size-cells = <1>;
imx8mm_uid: unique-id@410 {
reg = <0x4 0x8>;
};
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
fec_mac_address: mac-address@90 {
reg = <0x90 6>;
};
};
anatop: anatop@30360000 {
@ -909,13 +919,18 @@
assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
<&clk IMX8MM_CLK_ENET_TIMER>,
<&clk IMX8MM_CLK_ENET_REF>,
<&clk IMX8MM_CLK_ENET_TIMER>;
<&clk IMX8MM_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
<&clk IMX8MM_SYS_PLL2_100M>,
<&clk IMX8MM_SYS_PLL2_125M>;
assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
<&clk IMX8MM_SYS_PLL2_125M>,
<&clk IMX8MM_SYS_PLL2_50M>;
assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
nvmem-cells = <&fec_mac_address>;
nvmem-cell-names = "mac-address";
nvmem_macaddr_swap;
fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};

307
arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi Normal file
Просмотреть файл

@ -0,0 +1,307 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright 2020 Compass Electronics Group, LLC
*/
/ {
leds {
compatible = "gpio-leds";
led-0 {
label = "gen_led0";
gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-1 {
label = "gen_led1";
gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-2 {
label = "gen_led2";
gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led3>;
label = "heartbeat";
gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
reg_audio: regulator-audio {
compatible = "regulator-fixed";
regulator-name = "3v3_aud";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
regulator-name = "vsd_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg_vbus: regulator-usb {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb_otg>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sound {
compatible = "fsl,imx-audio-wm8962";
model = "wm8962-audio";
audio-cpu = <&sai3>;
audio-codec = <&wm8962>;
audio-routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
"Ext Spk", "SPKOUTL",
"Ext Spk", "SPKOUTR",
"AMIC", "MICBIAS",
"IN3R", "AMIC";
};
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_espi2>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
eeprom@0 {
compatible = "microchip,at25160bn", "atmel,at25";
reg = <0>;
spi-max-frequency = <5000000>;
spi-cpha;
spi-cpol;
pagesize = <32>;
size = <2048>;
address-width = <16>;
};
};
&i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
pca6416_0: gpio@20 {
compatible = "nxp,pcal6416";
reg = <0x20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcal6414>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio4>;
interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
};
pca6416_1: gpio@21 {
compatible = "nxp,pcal6416";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio4>;
interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
};
wm8962: audio-codec@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
clock-names = "xclk";
DCVDD-supply = <&reg_audio>;
DBVDD-supply = <&reg_audio>;
AVDD-supply = <&reg_audio>;
CPVDD-supply = <&reg_audio>;
MICVDD-supply = <&reg_audio>;
PLLVDD-supply = <&reg_audio>;
SPKVDD1-supply = <&reg_audio>;
SPKVDD2-supply = <&reg_audio>;
gpio-cfg = <
0x0000 /* 0:Default */
0x0000 /* 1:Default */
0x0000 /* 2:FN_DMICCLK */
0x0000 /* 3:Default */
0x0000 /* 4:FN_DMICCDAT */
0x0000 /* 5:Default */
>;
};
};
&easrc {
fsl,asrc-rate = <48000>;
status = "okay";
};
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
fsl,sai-mclk-direction-output;
status = "okay";
};
&snvs_pwrkey {
status = "okay";
};
&uart2 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clk IMX8MN_CLK_UART3>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usb_otg_vbus>;
disable-over-current;
dr_mode="otg";
status = "okay";
};
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
bus-width = <4>;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
};
&iomuxc {
pinctrl_espi2: espi2grp {
fsl,pins = <
MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82
MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82
MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82
MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
>;
};
pinctrl_led3: led3grp {
fsl,pins = <
MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x41
>;
};
pinctrl_pcal6414: pcal6414-gpiogrp {
fsl,pins = <
MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19
>;
};
pinctrl_reg_usb_otg: reg-otggrp {
fsl,pins = <
MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19
>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40
MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x41
MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
>;
};
};

19
arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts Normal file
Просмотреть файл

@ -0,0 +1,19 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright 2020 Compass Electronics Group, LLC
*/
/dts-v1/;
#include "imx8mn.dtsi"
#include "imx8mn-beacon-som.dtsi"
#include "imx8mn-beacon-baseboard.dtsi"
/ {
model = "Beacon EmbeddedWorks i.MX8M Nano Development Kit";
compatible = "beacon,imx8mn-beacon-kit", "fsl,imx8mn";
chosen {
stdout-path = &uart2;
};
};

466
arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi Normal file
Просмотреть файл

@ -0,0 +1,466 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright 2020 Compass Electronics Group, LLC
*/
/ {
aliases {
rtc0 = &rtc;
rtc1 = &snvs_rtc;
spi0 = &flexspi;
};
usdhc1_pwrseq: usdhc1_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1_gpio>;
reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
clocks = <&osc_32k>;
clock-names = "ext_clock";
post-power-on-delay-ms = <80>;
};
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0x80000000>;
};
};
&A53_0 {
cpu-supply = <&buck2_reg>;
};
&A53_1 {
cpu-supply = <&buck2_reg>;
};
&A53_2 {
cpu-supply = <&buck2_reg>;
};
&A53_3 {
cpu-supply = <&buck2_reg>;
};
/* DDR controller is running LPDDR at 800MHz which requires 0.95V */
&a53_opp_table {
opp-1200000000 {
opp-microvolt = <950000>;
};
};
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
ddrc_opp_table: opp-table {
compatible = "operating-points-v2";
opp-25M {
opp-hz = /bits/ 64 <25000000>;
};
opp-100M {
opp-hz = /bits/ 64 <100000000>;
};
opp-800M {
opp-hz = /bits/ 64 <800000000>;
};
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
phy-supply = <&buck6_reg>;
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
};
&flexspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi>;
status = "okay";
flash@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
regulators {
buck1_reg: BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
};
buck2_reg: BUCK2 {
regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-idle-voltage = <900000>;
};
buck3_reg: BUCK3 {
// BUCK5 in datasheet
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
buck4_reg: BUCK4 {
// BUCK6 in datasheet
regulator-name = "buck4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
buck5_reg: BUCK5 {
// BUCK7 in datasheet
regulator-name = "buck5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
regulator-always-on;
};
buck6_reg: BUCK6 {
// BUCK8 in datasheet
regulator-name = "buck6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: LDO1 {
regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: LDO4 {
regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
eeprom@50 {
compatible = "microchip,24c64", "atmel,24c64";
pagesize = <32>;
read-only; /* Manufacturing EEPROM programmed at factory */
reg = <0x50>;
};
rtc: rtc@51 {
compatible = "nxp,pcf85263";
reg = <0x51>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
assigned-clocks = <&clk IMX8MN_CLK_UART1>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
clocks = <&osc_32k>;
max-speed = <4000000>;
clock-names = "extclk";
};
};
&usdhc1 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
non-removable;
cap-power-off-card;
pm-ignore-notify;
keep-power-in-suspend;
mmc-pwrseq = <&usdhc1_pwrseq>;
status = "okay";
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan>;
interrupt-parent = <&gpio2>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
};
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
pinctrl_flexspi: flexspigrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2
MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
>;
};
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140
MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140
MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19
MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19
MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19
MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141
>;
};
pinctrl_usdhc1_gpio: usdhc1gpiogrp {
fsl,pins = <
MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
>;
};
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
>;
};
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
>;
};
pinctrl_wlan: wlangrp {
fsl,pins = <
MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9 0x111
>;
};
};

75
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
Просмотреть файл

@ -46,6 +46,40 @@
pinctrl-0 = <&pinctrl_ir>;
linux,autosuspend-period = <125>;
};
wm8524: audio-codec {
#sound-dai-cells = <0>;
compatible = "wlf,wm8524";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_wlf>;
wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
clock-names = "mclk";
};
sound-wm8524 {
compatible = "fsl,imx-audio-wm8524";
model = "wm8524-audio";
audio-cpu = <&sai3>;
audio-codec = <&wm8524>;
audio-asrc = <&easrc>;
audio-routing =
"Line Out Jack", "LINEVOUTL",
"Line Out Jack", "LINEVOUTR";
};
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
spdif-controller = <&spdif1>;
spdif-out;
spdif-in;
};
};
&easrc {
fsl,asrc-rate = <48000>;
status = "okay";
};
&fec1 {
@ -124,10 +158,29 @@
};
};
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
fsl,sai-mclk-direction-output;
status = "okay";
};
&snvs_pwrkey {
status = "okay";
};
&spdif1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif1>;
assigned-clocks = <&clk IMX8MN_CLK_SPDIF1>;
assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
status = "okay";
};
&uart2 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@ -210,6 +263,12 @@
>;
};
pinctrl_gpio_wlf: gpiowlfgrp {
fsl,pins = <
MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
>;
};
pinctrl_ir: irgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f
@ -249,6 +308,22 @@
>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
>;
};
pinctrl_spdif1: spdif1grp {
fsl,pins = <
MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6
MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6
>;
};
pinctrl_typec1: typec1grp {
fsl,pins = <
MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159

44
arch/arm64/boot/dts/freescale/imx8mn.dtsi
Просмотреть файл

@ -241,10 +241,12 @@
};
soc@0 {
compatible = "simple-bus";
compatible = "fsl,imx8mn-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
nvmem-cells = <&imx8mn_uid>;
nvmem-cell-names = "soc_unique_id";
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
@ -531,9 +533,17 @@
#address-cells = <1>;
#size-cells = <1>;
imx8mn_uid: unique-id@410 {
reg = <0x4 0x8>;
};
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
fec_mac_address: mac-address@90 {
reg = <0x90 6>;
};
};
anatop: anatop@30360000 {
@ -581,7 +591,9 @@
<&clk IMX8MN_CLK_NOC>,
<&clk IMX8MN_CLK_AUDIO_AHB>,
<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MN_SYS_PLL3>;
<&clk IMX8MN_SYS_PLL3>,
<&clk IMX8MN_AUDIO_PLL1>,
<&clk IMX8MN_AUDIO_PLL2>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
<&clk IMX8MN_ARM_PLL_OUT>,
<&clk IMX8MN_SYS_PLL3_OUT>,
@ -589,7 +601,9 @@
assigned-clock-rates = <0>, <0>, <0>,
<400000000>,
<400000000>,
<600000000>;
<600000000>,
<393216000>,
<361267200>;
};
src: reset-controller@30390000 {
@ -875,6 +889,19 @@
status = "disabled";
};
flexspi: spi@30bb0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nxp,imx8mm-fspi";
reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_QSPI_ROOT>,
<&clk IMX8MN_CLK_QSPI_ROOT>;
clock-names = "fspi", "fspi_en";
status = "disabled";
};
sdma1: dma-controller@30bd0000 {
compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
@ -903,13 +930,18 @@
assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
<&clk IMX8MN_CLK_ENET_TIMER>,
<&clk IMX8MN_CLK_ENET_REF>,
<&clk IMX8MN_CLK_ENET_TIMER>;
<&clk IMX8MN_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
<&clk IMX8MN_SYS_PLL2_100M>,
<&clk IMX8MN_SYS_PLL2_125M>;
assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
<&clk IMX8MN_SYS_PLL2_125M>,
<&clk IMX8MN_SYS_PLL2_50M>;
assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
nvmem-cells = <&fec_mac_address>;
nvmem-cell-names = "mac-address";
nvmem_macaddr_swap;
fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};

161
arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts Normal file
Просмотреть файл

@ -0,0 +1,161 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020 PHYTEC Messtechnik GmbH
* Author: Teresa Remmet <t.remmet@phytec.de>
*/
/dts-v1/;
#include <dt-bindings/leds/leds-pca9532.h>
#include <dt-bindings/pwm/pwm.h>
#include "imx8mp-phycore-som.dtsi"
/ {
model = "PHYTEC phyBOARD-Pollux i.MX8MP";
compatible = "phytec,imx8mp-phyboard-pollux-rdk",
"phytec,imx8mp-phycore-som", "fsl,imx8mp";
chosen {
stdout-path = &uart2;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
off-on-delay-us = <12000>;
};
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
leds@62 {
compatible = "nxp,pca9533";
reg = <0x62>;
led1 {
type = <PCA9532_TYPE_LED>;
};
led2 {
type = <PCA9532_TYPE_LED>;
};
led3 {
type = <PCA9532_TYPE_LED>;
};
};
};
&snvs_pwrkey {
status = "okay";
};
/* debug console */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
/* SD-Card */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_usdhc2_vmmc>;
bus-width = <4>;
status = "okay";
};
&iomuxc {
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
>;
};
pinctrl_usdhc2_pins: usdhc2-gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
};

293
arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi Normal file
Просмотреть файл

@ -0,0 +1,293 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020 PHYTEC Messtechnik GmbH
* Author: Teresa Remmet <t.remmet@phytec.de>
*/
#include <dt-bindings/net/ti-dp83867.h>
#include "imx8mp.dtsi"
/ {
model = "PHYTEC phyCORE-i.MX8MP";
compatible = "phytec,imx8mp-phycore-som", "fsl,imx8mp";
aliases {
rtc0 = &rv3028;
rtc1 = &snvs_rtc;
};
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0x80000000>;
};
};
&A53_0 {
cpu-supply = <&buck2>;
};
&A53_1 {
cpu-supply = <&buck2>;
};
&A53_2 {
cpu-supply = <&buck2>;
};
&A53_3 {
cpu-supply = <&buck2>;
};
/* ethernet 1 */
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy1>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
enet-phy-lane-no-swap;
};
};
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
pmic: pmic@25 {
reg = <0x25>;
compatible = "nxp,pca9450c";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio4>;
interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1: BUCK1 {
regulator-compatible = "BUCK1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
buck2: BUCK2 {
regulator-compatible = "BUCK2";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
buck4: BUCK4 {
regulator-compatible = "BUCK4";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
buck5: BUCK5 {
regulator-compatible = "BUCK5";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
buck6: BUCK6 {
regulator-compatible = "BUCK6";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
ldo1: LDO1 {
regulator-compatible = "LDO1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo2: LDO2 {
regulator-compatible = "LDO2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
ldo3: LDO3 {
regulator-compatible = "LDO3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4: LDO4 {
regulator-compatible = "LDO4";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo5: LDO5 {
regulator-compatible = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
eeprom@51 {
compatible = "atmel,24c32";
reg = <0x51>;
pagesize = <32>;
};
rv3028: rtc@52 {
compatible = "microcrystal,rv3028";
reg = <0x52>;
trickle-resistor-ohms = <3000>;
};
};
/* eMMC */
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x11
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
>;
};
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1e3
MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1e3
>;
};
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x141
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
>;
};
};

23
arch/arm64/boot/dts/freescale/imx8mp.dtsi
Просмотреть файл

@ -218,10 +218,12 @@
};
soc@0 {
compatible = "simple-bus";
compatible = "fsl,imx8mp-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
nvmem-cells = <&imx8mp_uid>;
nvmem-cell-names = "soc_unique_id";
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
@ -328,9 +330,17 @@
#address-cells = <1>;
#size-cells = <1>;
imx8mp_uid: unique-id@420 {
reg = <0x8 0x8>;
};
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
eth_mac1: mac-address@90 {
reg = <0x90 6>;
};
};
anatop: anatop@30360000 {
@ -762,13 +772,18 @@
assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
<&clk IMX8MP_CLK_ENET_TIMER>,
<&clk IMX8MP_CLK_ENET_REF>,
<&clk IMX8MP_CLK_ENET_TIMER>;
<&clk IMX8MP_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
<&clk IMX8MP_SYS_PLL2_100M>,
<&clk IMX8MP_SYS_PLL2_125M>;
assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
<&clk IMX8MP_SYS_PLL2_125M>,
<&clk IMX8MP_SYS_PLL2_50M>;
assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
nvmem-cells = <&eth_mac1>;
nvmem-cell-names = "mac-address";
fsl,stop-mode = <&gpr 0x10 3>;
nvmem_macaddr_swap;
status = "disabled";
};
};

20
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
Просмотреть файл

@ -244,11 +244,6 @@
cpu-supply = <&buck2_reg>;
};
&clk {
assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
assigned-clock-rates = <786432000>, <722534400>;
};
&dphy {
status = "okay";
};
@ -298,6 +293,7 @@
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <900000>;
rohm,dvs-idle-voltage = <850000>;
@ -319,6 +315,7 @@
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-enable-ramp-delay = <200>;
rohm,dvs-run-voltage = <900000>;
};
@ -334,6 +331,7 @@
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
buck6_reg: BUCK6 {
@ -341,6 +339,7 @@
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
buck7_reg: BUCK7 {
@ -348,6 +347,7 @@
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
regulator-always-on;
};
buck8_reg: BUCK8 {
@ -355,6 +355,7 @@
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: LDO1 {
@ -380,6 +381,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: LDO4 {
@ -387,12 +389,14 @@
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo5_reg: LDO5 {
regulator-name = "ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo6_reg: LDO6 {
@ -400,6 +404,7 @@
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo7_reg: LDO7 {
@ -407,6 +412,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};
@ -886,6 +892,10 @@
status = "okay";
};
&snvs_rtc {
status = "disabled";
};
&sai2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2>;

6
arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
Просмотреть файл

@ -10,6 +10,12 @@
compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
};
&a53_opp_table {
opp-1000000000 {
opp-microvolt = <1000000>;
};
};
&accel_gyro {
mount-matrix = "1", "0", "0",
"0", "1", "0",

35
arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts Normal file
Просмотреть файл

@ -0,0 +1,35 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
/dts-v1/;
#include "imx8mq-librem5.dtsi"
/ {
model = "Purism Librem 5r4";
compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq";
};
&accel_gyro {
mount-matrix = "1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
&bat {
maxim,rsns-microohm = <1667>;
};
&bq25895 {
ti,battery-regulation-voltage = <4200000>; /* uV */
ti,charge-current = <1500000>; /* uA */
ti,termination-current = <144000>; /* uA */
};
&led_backlight {
led-max-microamp = <25000>;
};
&proximity {
proximity-near-level = <10>;
};

113
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
Просмотреть файл

@ -82,6 +82,20 @@
enable-active-high;
};
reg_lcd_1v8: regulator-lcd-1v8 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dsien>;
regulator-name = "LCD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&reg_vdd_1v8>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
/* Otherwise i2c3 is not functional */
regulator-always-on;
};
reg_lcd_3v4: regulator-lcd-3v4 {
compatible = "regulator-fixed";
regulator-name = "LCD_3V4";
@ -99,6 +113,14 @@
regulator-max-microvolt = <3300000>;
};
reg_vdd_1v8: regulator-vdd-1v8 {
compatible = "regulator-fixed";
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&buck7_reg>;
};
reg_vdd_3v3: regulator-vdd-3v3 {
compatible = "regulator-fixed";
regulator-name = "VDD_3V3";
@ -106,13 +128,6 @@
regulator-max-microvolt = <3300000>;
};
reg_vdd_1v8: regulator-vdd-1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
reg_vsys_3v4: regulator-vsys-3v4 {
compatible = "regulator-fixed";
regulator-name = "VSYS_3V4";
@ -275,7 +290,7 @@
pinctrl_charger_in: chargeringrp {
fsl,pins = <
/* CHRG_INT */
MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x00
MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80
/* CHG_STATUS_B */
MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80
>;
@ -295,6 +310,17 @@
>;
};
pinctrl_dsirst: dsirstgrp {
fsl,pins = <
/* DSI_RST */
MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x83
/* DSI_TE */
MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28 0x83
/* TP_RST */
MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x83
>;
};
pinctrl_ecspi1: ecspigrp {
fsl,pins = <
MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83
@ -458,6 +484,13 @@
>;
};
pinctrl_touch: touchgrp {
fsl,pins = <
/* TP_INT */
MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27 0x80
>;
};
pinctrl_typec: typecgrp {
fsl,pins = <
/* TYPEC_MUX_EN */
@ -649,6 +682,7 @@
regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <900000>;
rohm,dvs-idle-voltage = <850000>;
@ -660,6 +694,7 @@
regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-idle-voltage = <900000>;
@ -670,8 +705,8 @@
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
rohm,dvs-run-voltage = <900000>;
regulator-always-on;
};
buck4_reg: BUCK4 {
@ -685,6 +720,7 @@
regulator-name = "buck5";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
@ -692,6 +728,7 @@
regulator-name = "buck6";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
@ -699,6 +736,7 @@
regulator-name = "buck7";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
regulator-always-on;
};
@ -706,6 +744,7 @@
regulator-name = "buck8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
@ -713,6 +752,7 @@
regulator-name = "ldo1";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
/* leave on for snvs power button */
regulator-always-on;
};
@ -721,6 +761,7 @@
regulator-name = "ldo2";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
/* leave on for snvs power button */
regulator-always-on;
};
@ -729,6 +770,7 @@
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
@ -736,6 +778,7 @@
regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
@ -752,6 +795,7 @@
regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
@ -760,6 +804,7 @@
regulator-name = "ldo7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
@ -796,12 +841,12 @@
compatible = "tps65132";
reg = <0x3e>;
outp {
reg_lcd_avdd: outp {
regulator-name = "LCD_AVDD";
vin-supply = <&reg_lcd_3v4>;
};
outn {
reg_lcd_avee: outn {
regulator-name = "LCD_AVEE";
vin-supply = <&reg_lcd_3v4>;
};
@ -879,10 +924,13 @@
touchscreen@38 {
compatible = "edt,edt-ft5506";
reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touch>;
interrupt-parent = <&gpio1>;
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
touchscreen-size-x = <720>;
touchscreen-size-y = <1440>;
vcc-supply = <&reg_lcd_1v8>;
};
};
@ -919,6 +967,45 @@
ti,use-vinmin-threshold = <1>; /* enable VINDPM */
ti,vinmin-threshold = <3900000>; /* uV */
monitored-battery = <&bat>;
power-supplies = <&typec_pd>;
};
};
&lcdif {
status = "okay";
};
&mipi_dsi {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
lcd_panel: panel@0 {
compatible = "mantix,mlaf057we51-x";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dsirst>;
avdd-supply = <&reg_lcd_avdd>;
avee-supply = <&reg_lcd_avee>;
vddi-supply = <&reg_lcd_1v8>;
backlight = <&backlight_dsi>;
reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
port {
panel_in: endpoint {
remote-endpoint = <&mipi_dsi_out>;
};
};
};
ports {
port@1 {
reg = <1>;
mipi_dsi_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
@ -1072,6 +1159,8 @@
};
&usdhc1 {
assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
assigned-clock-rates = <400000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@ -1084,6 +1173,8 @@
};
&usdhc2 {
assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
assigned-clock-rates = <200000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;

93
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
Просмотреть файл

@ -10,6 +10,56 @@
/ {
model = "ZII Ultra RMB3 Board";
compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq";
sound1 {
compatible = "simple-audio-card";
simple-audio-card,name = "front";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound1_codec>;
simple-audio-card,frame-master = <&sound1_codec>;
simple-audio-card,widgets =
"Headphone", "Headphone Jack Front";
simple-audio-card,routing =
"Headphone Jack Front", "HPA1 HPLEFT",
"Headphone Jack Front", "HPA1 HPRIGHT",
"HPA1 LEFTIN", "HPL",
"HPA1 RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&hpa1>;
sound1_cpu: simple-audio-card,cpu {
sound-dai = <&sai2>;
};
sound1_codec: simple-audio-card,codec {
sound-dai = <&codec1>;
clocks = <&cs2000>;
};
};
sound2 {
compatible = "simple-audio-card";
simple-audio-card,name = "periph";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound2_codec>;
simple-audio-card,frame-master = <&sound2_codec>;
simple-audio-card,widgets =
"Headphone", "Headphone Jack Back";
simple-audio-card,routing =
"Headphone Jack Back", "HPA1 HPLEFT",
"Headphone Jack Back", "HPA1 HPRIGHT",
"HPA1 LEFTIN", "HPL",
"HPA1 RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&hpa2>;
sound2_cpu: simple-audio-card,cpu {
sound-dai = <&sai3>;
};
sound2_codec: simple-audio-card,codec {
sound-dai = <&codec2>;
clocks = <&cs2000>;
};
};
};
&ecspi1 {
@ -27,6 +77,27 @@
};
};
&hpa2 {
sound-name-prefix = "HPA1";
};
&i2c1 {
codec2: codec@18 {
compatible = "ti,tlv320dac3100";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_codec2>;
reg = <0x18>;
#sound-dai-cells = <0>;
HPVDD-supply = <&reg_3p3v>;
SPRVDD-supply = <&reg_3p3v>;
SPLVDD-supply = <&reg_3p3v>;
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
};
};
&i2c2 {
temp-sense@48 {
compatible = "national,lm75";
@ -56,6 +127,8 @@
touchscreen-inverted-x;
touchscreen-swapped-x-y;
syna,sensor-type = <1>;
syna,delta-x-threshold = <5>;
syna,delta-y-threshold = <10>;
};
rmi4-f12@12 {
@ -79,11 +152,23 @@
};
};
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
status = "okay";
};
&usbhub {
swap-dx-lanes = <0>;
};
&iomuxc {
pinctrl_codec2: dac2grp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x41
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19
@ -92,4 +177,12 @@
MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
>;
};
};

30
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
Просмотреть файл

@ -10,6 +10,36 @@
/ {
model = "ZII Ultra Zest Board";
compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq";
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "front";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound_codec>;
simple-audio-card,frame-master = <&sound_codec>;
simple-audio-card,widgets =
"Headphone", "Headphone Jack Front",
"Headphone", "Headphone Jack Back";
simple-audio-card,routing =
"Headphone Jack Front", "HPA1 HPLEFT",
"Headphone Jack Front", "HPA1 HPRIGHT",
"Headphone Jack Back", "HPA2 HPLEFT",
"Headphone Jack Back", "HPA2 HPRIGHT",
"HPA1 LEFTIN", "HPL",
"HPA1 RIGHTIN", "HPR",
"HPA2 LEFTIN", "HPL",
"HPA2 RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&hpa1>, <&hpa2>;
sound_cpu: simple-audio-card,cpu {
sound-dai = <&sai2>;
};
sound_codec: simple-audio-card,codec {
sound-dai = <&codec1>;
clocks = <&cs2000>;
};
};
};
&i2c4 {

118
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
Просмотреть файл

@ -77,6 +77,15 @@
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
vin-supply = <&reg_3p3_main>;
regulator-name = "GEN_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usdhc2_vmmc: regulator-vsd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2>;
@ -102,6 +111,18 @@
900000 0x0>;
regulator-always-on;
};
cs2000_ref: cs2000-ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
cs2000_in_dummy: cs2000-in-dummy {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
};
&A53_0 {
@ -283,9 +304,19 @@
reg = <0x32>;
interrupt-parent = <&gpio3>;
interrupts = <17 IRQ_TYPE_EDGE_BOTH>,
<18 IRQ_TYPE_EDGE_BOTH>;
<18 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "a_det", "alert";
};
hpa2: amp@60 {
compatible = "ti,tpa6130a2";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpa2>;
reg = <0x60>;
power-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
Vdd-supply = <&reg_5p0_main>;
sound-name-prefix = "HPA2";
};
};
&i2c2 {
@ -378,11 +409,36 @@
};
};
codec1: codec@18 {
compatible = "ti,tlv320dac3100";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_codec1>;
reg = <0x18>;
#sound-dai-cells = <0>;
HPVDD-supply = <&reg_3p3v>;
SPRVDD-supply = <&reg_3p3v>;
SPLVDD-supply = <&reg_3p3v>;
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
hpa1: amp@60 {
compatible = "ti,tpa6130a2";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpa1>;
reg = <0x60>;
power-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
Vdd-supply = <&reg_5p0_main>;
sound-name-prefix = "HPA1";
};
ds1341: rtc@68 {
compatible = "dallas,ds1341";
reg = <0x68>;
@ -407,6 +463,16 @@
compatible = "zii,rave-wdt";
reg = <0x38>;
};
cs2000: clkgen@4e {
compatible = "cirrus,cs2000-cp";
reg = <0x4e>;
#clock-cells = <0>;
clock-names = "clk_in", "ref_clk";
clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24000000>;
};
};
&i2c4 {
@ -416,6 +482,12 @@
status = "okay";
};
&sai2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@ -468,6 +540,7 @@
&usb_dwc3_0 {
dr_mode = "host";
maximum-speed = "high-speed";
status = "okay";
};
@ -478,6 +551,7 @@
&usb_dwc3_1 {
dr_mode = "host";
maximum-speed = "high-speed";
status = "okay";
};
@ -551,6 +625,12 @@
>;
};
pinctrl_codec1: dac1grp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x41
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
@ -583,29 +663,29 @@
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000022
MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000a2
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000022
MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000a2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000022
MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000a2
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f
MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f
MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000022
MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x400000a2
>;
};
@ -642,12 +722,32 @@
>;
};
pinctrl_sai2: sai2grp {
fsl,pins = <
MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
>;
};
pinctrl_switch_irq: switchgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
>;
};
pinctrl_tpa1: tpa6130-1grp {
fsl,pins = <
MX8MQ_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x41
>;
};
pinctrl_tpa2: tpa6130-2grp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41
>;
};
pinctrl_ts: tsgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x96

72
arch/arm64/boot/dts/freescale/imx8mq.dtsi
Просмотреть файл

@ -11,6 +11,7 @@
#include "dt-bindings/input/input.h"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interconnect/imx8mq.h>
#include "imx8mq-pinfunc.h"
/ {
@ -286,11 +287,13 @@
};
soc@0 {
compatible = "simple-bus";
compatible = "fsl,imx8mq-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
nvmem-cells = <&imx8mq_uid>;
nvmem-cell-names = "soc_unique_id";
bus@30000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
@ -522,6 +525,8 @@
<&clk IMX8MQ_VIDEO_PLL1>,
<&clk IMX8MQ_VIDEO_PLL1_OUT>;
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
interconnect-names = "dram";
status = "disabled";
port@0 {
@ -555,9 +560,17 @@
#address-cells = <1>;
#size-cells = <1>;
imx8mq_uid: soc-uid@410 {
reg = <0x4 0x8>;
};
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
fec_mac_address: mac-address@90 {
reg = <0x90 6>;
};
};
anatop: syscon@30360000 {
@ -826,6 +839,8 @@
clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
<&clk IMX8MQ_CLK_ECSPI1_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -838,6 +853,8 @@
clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
<&clk IMX8MQ_CLK_ECSPI2_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -850,6 +867,8 @@
clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
<&clk IMX8MQ_CLK_ECSPI3_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -1016,9 +1035,14 @@
reg = <0x30a00300 0x100>;
clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
clock-names = "phy_ref";
assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
assigned-clock-rates = <24000000>;
assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
<&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
<&clk IMX8MQ_CLK_DSI_PHY_REF>,
<&clk IMX8MQ_VIDEO_PLL1>;
assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
<&clk IMX8MQ_VIDEO_PLL1>,
<&clk IMX8MQ_VIDEO_PLL1_OUT>;
assigned-clock-rates = <0>, <0>, <24000000>, <594000000>;
#phy-cells = <0>;
power-domains = <&pgc_mipi>;
status = "disabled";
@ -1152,12 +1176,50 @@
<&clk IMX8MQ_CLK_ENET_PHY_REF>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI>,
<&clk IMX8MQ_CLK_ENET_TIMER>,
<&clk IMX8MQ_CLK_ENET_REF>,
<&clk IMX8MQ_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
<&clk IMX8MQ_SYS2_PLL_100M>,
<&clk IMX8MQ_SYS2_PLL_125M>,
<&clk IMX8MQ_SYS2_PLL_50M>;
assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
nvmem-cells = <&fec_mac_address>;
nvmem-cell-names = "mac-address";
nvmem_macaddr_swap;
fsl,stop-mode = <&iomuxc_gpr 0x10 3>;
status = "disabled";
};
};
noc: interconnect@32700000 {
compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
reg = <0x32700000 0x100000>;
clocks = <&clk IMX8MQ_CLK_NOC>;
fsl,ddrc = <&ddrc>;
#interconnect-cells = <1>;
operating-points-v2 = <&noc_opp_table>;
noc_opp_table: opp-table {
compatible = "operating-points-v2";
opp-133M {
opp-hz = /bits/ 64 <133333333>;
};
opp-400M {
opp-hz = /bits/ 64 <400000000>;
};
opp-800M {
opp-hz = /bits/ 64 <800000000>;
};
};
};
bus@32c00000 { /* AIPS4 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
@ -1315,6 +1377,7 @@
<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
fsl,max-link-speed = <2>;
linux,pci-domain = <0>;
power-domains = <&pgc_pcie>;
resets = <&src IMX8MQ_RESET_PCIEPHY>,
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
@ -1344,6 +1407,7 @@
<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
fsl,max-link-speed = <2>;
linux,pci-domain = <1>;
power-domains = <&pgc_pcie>;
resets = <&src IMX8MQ_RESET_PCIEPHY2>,
<&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,

6
arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
Просмотреть файл

@ -6,6 +6,8 @@
*
*/
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
fman0: fman@1a00000 {
#address-cells = <1>;
#size-cells = <1>;
@ -15,7 +17,7 @@ fman0: fman@1a00000 {
reg = <0x0 0x1a00000 0x0 0xfe000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 3 0>;
clocks = <&clockgen QORIQ_CLK_FMAN 0>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x800 0x10>;
ptimer-handle = <&ptp_timer0>;
@ -81,6 +83,6 @@ ptp_timer0: ptp-timer@1afe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x0 0x1afe000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 3 0>;
clocks = <&clockgen QORIQ_CLK_FMAN 0>;
fsl,extts-fifo;
};