commit 54cf39ec16335dadbe1ba008d8e5e98dae3e26f8 upstream.
The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are
associated to an index that is used to select the right measurement
resolution and its corresponding measurement time. The current
implementation selects the measurement resolution and the temperature
measurement time properly, but it does not select the right humidity
measurement time in all cases.
In summary, the 40 and 70 humidity measurement times are swapped.
The reason for that is probably the unusual coding for the measurement
resolution. According to the datasheet, the bits [7,0] of the "user
register" are used as follows to select the bit resolution:
--------------------------------------------------
| Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) |
--------------------------------------------------
| 0 | 0 | 12 | 14 | 16000 | 50000 |
--------------------------------------------------
| 0 | 1 | 8 | 12 | 3000 | 13000 |
--------------------------------------------------
| 1 | 0 | 10 | 13 | 5000 | 25000 |
--------------------------------------------------
| 1 | 1 | 11 | 11 | 8000 | 7000 |
--------------------------------------------------
*This table is available in the official datasheet, page 13/21. I have
just appended the times provided in the humidity/temperature tables,
pages 3/21, 5/21. Note that always a pair of resolutions is selected.
The sampling frequencies [20, 40, 70, 120] are assigned to a linear
index [0..3] which is then coded as follows [1]:
Index [7,0]
--------------
idx 0 0,0
idx 1 1,0
idx 2 0,1
idx 3 1,1
That is done that way because the temperature measurements are being
used as the reference for the sampling frequency (the frequencies and
the temperature measurement times are correlated), so increasing the
index always reduces the temperature measurement time and its
resolution. Therefore, the temperature measurement time array is as
simple as [50000, 25000, 13000, 7000]
On the other hand, the humidity resolution cannot follow the same
pattern because of the way it is coded in the "user register", where
both resolutions are selected at the same time. The humidity measurement
time array is the following: [16000, 3000, 5000, 8000], which defines
the following assignments:
Index [7,0] Trh
-----------------------
idx 0 0,0 16000 -> right, [0,0] selects 12 bits (Trh = 16000)
idx 1 1,0 3000 -> wrong! [1,0] selects 10 bits (Trh = 5000)
idx 2 0,1 5000 -> wrong! [0,1] selects 8 bits (Trh = 3000)
idx 3 1,1 8000 -> right, [1,1] selects 11 bits (Trh = 8000)
The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0],
which is not the case for the reason explained above.
So a simple modification is required to obtain the right humidity
measurement time array, swapping the values in the positions 1 and 2.
The right table should be the following: [16000, 5000, 3000, 8000]
Fix the humidity measurement time array with the right idex/value
coding.
[1] The actual code that makes this coding and assigns it to the current
value of the "user register" is the following:
config_reg &= 0x7E;
config_reg |= ((i & 1) << 7) + ((i & 2) >> 1);
Fixes: d574a87cc3 ("Add meas-spec sensors common part")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7771c8c80d ]
cros_ec_sensors_push_data() reads `indio_dev->active_scan_mask` and
calls iio_push_to_buffers_with_timestamp() without making sure the
`indio_dev` stays in buffer mode. There is a race if `indio_dev` exits
buffer mode right before cros_ec_sensors_push_data() accesses them.
An use-after-free on `indio_dev->active_scan_mask` was observed. The
call trace:
[...]
_find_next_bit
cros_ec_sensors_push_data
cros_ec_sensorhub_event
blocking_notifier_call_chain
cros_ec_irq_thread
It was caused by a race condition: one thread just freed
`active_scan_mask` at [1]; while another thread tried to access the
memory at [2].
Fix it by calling iio_device_claim_buffer_mode() to ensure the
`indio_dev` can't exit buffer mode during cros_ec_sensors_push_data().
[1]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/industrialio-buffer.c#L1189
[2]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c#L198
Cc: stable@vger.kernel.org
Fixes: aa984f1ba4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230829030622.1571852-1-tzungbi@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8a4629055e upstream.
The struct cros_ec_command contains several integer fields and a
trailing array. An allocation size neglecting the integer fields can
lead to buffer overrun.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Yiyuan Guo <yguoaz@gmail.com>
Fixes: 974e6f02e2 ("iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.")
Link: https://lore.kernel.org/r/20230630143719.1513906-1-yguoaz@gmail.com
Cc: <Stable@vger.kerenl.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0b4ae3f6d1 ]
Instead of registering callback to process sensor events right at
initialization time, wait for the sensor to be register in the iio
subsystem.
Events can come at probe time (in case the kernel rebooted abruptly
without switching the sensor off for instance), and be sent to IIO core
before the sensor is fully registered.
Fixes: aa984f1ba4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220711144716.642617-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 474010127e ]
Right now the (framework) mlock lock is (ab)used for multiple purposes:
1- protecting concurrent accesses over the odr local cache
2- avoid changing samplig frequency whilst buffer is running
Let's start by handling situation #1 with a local lock.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The "idx" is validated at the start of the loop but it gets incremented
during the iteration so it needs to be checked again.
Fixes: 50dd64d57e ("iio: common: ssp_sensors: Add sensorhub driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210909091336.GA26312@kili
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ssp_print_mcu_debug() function should return negative error codes on
error. Returning "length" is meaningless. This change does not affect
runtime because the callers only care about zero/non-zero.
Reported-by: Jonathan Cameron <jic23@kernel.org>
Fixes: 50dd64d57e ("iio: common: ssp_sensors: Add sensorhub driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210914105333.GA11657@kili
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
HZ unit conversion macros are available in units.h, use them and remove
the duplicate definition.
Link: https://lkml.kernel.org/r/20210816114732.1834145-8-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Christian Eggers <ceggers@arri.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The st-sensors drivers have changed in structure over time, and includes
have not always kept up with this. Let's bring them back to nearer
the ideal.
Identified with the include-what-you-use tool and careful checking of
its suggestions.
Note I haven't been particularly aggressive here, so this is just the
cases where the include obviously isn't needed rather than the more
subtle corners.
Note I took the opportunity to add mod_devicetable.h as I generally
prefer to see that when acpi or of match tables are present.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210608175149.4019289-1-jic23@kernel.org
General driver churn doesn't always include updates of header includes.
Manual review of the output of the include-what-you-use checker lead to the
following cleanup. Hopefuly this brings things back to a good state for the
hid-sensor drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210608205510.4033887-1-jic23@kernel.org
A namespace for exported symbols makes clear who is a provider
and who is a consumer of the certain resources. Besides that,
it doesn't pollute the common namespace.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210614162447.5392-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The call to pm_runtime_put_noidle() in remove() callback is not
balanced by any gets
Note this doesn't cause any problems beyond reader confusion as the runtime
pm core protects against the reference counter going negative.
Whilst here, use pm_runtiem_resume_and_get() to simplify code a little.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210509113354.660190-9-jic23@kernel.org
Continuing from Alexandru Ardelean's introduction of the split between
driver modifiable fields and those that should only be set by the core.
This could have been done in two steps to make the actual move after
introducing iio_device_id() but there seemed limited point to that
given how mechanical the majority of the patch is.
Includes fixup from Alex for missing mxs-lradc-adc conversion.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210426174911.397061-2-jic23@kernel.org
This is already set to the same value in devm_iio_device_alloc()
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jyoti Bhayana <jbhayana@google.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210426170251.351957-9-jic23@kernel.org
During commit 067fda1c06 ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_triggered_buffer_{setup,cleanup}() functions got moved under the
hid-sensor-trigger module.
The above change works fine, if any of the sensors get built. However, when
only the common hid-sensor-trigger module gets built (and none of the
drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced.
Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets
selected.
All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this
change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.
Fixes: 067fda1c06 ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger")
Reported-by: Thomas Deutschmann <whissi@gentoo.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
Updated to use devm_iio_kfifo_buffer_setup() in place of now
removed devm_iio_kfifo_allocate()
Take3 branch because first 2 versions including wrong version of
patch.
Commit 2e2366c2d1 ("iio: cros_ec: unify hw fifo attributes into the core file")
should be reverted as it set buffer extended attributes at
the wrong place. However, to revert it will requires to revert more
commits:
commit 165aea80e2 ("iio: cros_ec: use devm_iio_triggered_buffer_setup_ext()")
commit 21232b4456 ("iio: buffer: remove iio_buffer_set_attrs() helper")).
and we would still have conflict with more recent development.
commit ee708e6baa ("iio: buffer: introduce support for attaching more IIO buffers")
Instead, this commit reverts the first 2 commits without re-adding
iio_buffer_set_attrs() and set the buffer extended attributes at the
right place:
1. Instead of adding has_fw_fifo, deduct it from the configuration:
- EC must support FIFO (EC_FEATURE_MOTION_SENSE_FIFO) set.
- sensors send data a regular interval (accelerometer, gyro,
magnetomer, barometer, light sensor).
- "Legacy accelerometer" is only present on EC without FIFO, so we don't
need to set buffer attributes.
2. devm_iio_triggered_buffer_setup_ext() does not need to be called when
EC does not support FIFO, as there is no FIFO to manage.
3. Use devm_iio_triggered_buffer_setup_ext() when EC has a FIFO to
specify the buffer extended attributes.
Fixes: 2e2366c2d1 ("iio: cros_ec: unify hw fifo attributes into the core file")
Fixes: 165aea80e2 ("iio: cros_ec: use devm_iio_triggered_buffer_setup_ext()")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210318184857.2679181-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
cros_ec_sensors_read_data_unsafe() had wrong function name in kernel-doc
This shows up with W=1 builds.
No fixes tag because I don't want to waste time on this being
backported.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210313145341.116088-1-jic23@kernel.org
When allocated with [devm_]iio_trigger_alloc(), set trig device parent to
the device the trigger is allocated for by default.
It can always be reassigned in the probe routine.
Change iio_trigger_alloc() API to add the device pointer to be coherent
with devm_iio_trigger_alloc, using similar interface to
iio_device_alloc().
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-2-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change provides ARM SCMI Protocol based IIO device.
This driver provides support for Accelerometer and Gyroscope using
SCMI Sensor Protocol extensions added in the SCMIv3.0 ARM specification
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jyoti Bhayana <jbhayana@google.com>
Link: https://lore.kernel.org/r/20210212172235.507028-2-jbhayana@google.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210309231259.78050-2-jbhayana@google.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some hid sensors may use relative sensitivity such as als sensor.
This patch adds relative sensitivity checking for all hid sensors.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/20210207070048.23935-2-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No functional change has been made with this patch. The main intent here
is to reduce code repetition of getting sensitivity attribute.
In the current implementation, sensor_hub_input_get_attribute_info() is
called from multiple drivers to get attribute info for sensitivity
field. Moving this to common place will avoid code repetition.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210201054921.18214-2-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All drivers that already call devm_iio_kfifo_allocate() &
iio_device_attach_buffer() are simple to convert to
iio_device_attach_kfifo_buffer() in a single go.
This change does that; the unwind order is preserved.
What is important, is that the devm_iio_kfifo_buffer_setup() be called
after the indio_dev->modes is assigned, to make sure that
INDIO_BUFFER_SOFTWARE flag is set and not overridden by the assignment to
indio_dev->modes.
Also, the INDIO_BUFFER_SOFTWARE has been removed from the assignments of
'indio_dev->modes' because it is set by devm_iio_kfifo_buffer_setup().
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>x
Link: https://lore.kernel.org/r/20210215104043.91251-4-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently, only the 112bit PROM with 7 words is supported. However the ms58xx
family also have devices with a 128bit PROM on 8 words. See AN520:
C-CODE EXAMPLE FOR MS56XX, MS57XX (EXCEPT ANALOG SENSOR), AND MS58XX SERIES
PRESSURE SENSORS and the various device datasheets.
The difference is that the CRC is the 4 LSBs of word7 instead of being the
4 MSBs of word0.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210109231148.1168104-6-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The CRC calculation always happens on 8 words which is why there is an
extra element in the prom array of struct ms_tp_dev. However, on ms5637 and
similar, only 7 words are readable.
Then, set MS_SENSORS_TP_PROM_WORDS_NB to 8 and stop passing a len parameter
to ms_sensors_tp_crc_valid as this simply hide the fact that it is
hardcoded.
Finally, use the newly introduced hw->prom_len to know how many words can be
read.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210109231148.1168104-5-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some sensors in the ms58xx family have a different PROM length and a
different number of available resolution. introduce struct ms_tp_hw_data to
handle those differences.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210109231148.1168104-3-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Hinge sensor is a common custom sensor on laptops. It calculates
the angle between the lid (screen) and the base (keyboard). In addition,
it also exposes screen and the keyboard angles with respect to the
ground. Applications can easily get laptop's status in space through
this sensor, in order to display appropriate user interface.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Link: https://lore.kernel.org/r/20201215054444.9324-3-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Return a boolean value in st_sensors_new_samples_available routine in
order to avoid an infinite loop in st_sensors_irq_thread if
stat_drdy.addr is not defined or stat_drdy read fails
Fixes: 90efe05562 ("iio: st_sensors: harden interrupt handling")
Reported-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/c9ec69ed349e7200c779fd7a5bf04c1aaa2817aa.1607438132.git.lorenzo@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.
Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).
Listed by manufacturer
- dht11 temperature(drop)
- adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
adi,adis16480 adi,adf4350
- ams,as3935
- asahi-kasei,ak8974
- atmel,sama5d2-adc
- avago,apds9300 avago,apds9960
- bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
- brcm,iproc-static-adc
- capella,cm36651
- domintech,dmard06(drop)
- fsl,mag3110 fsl,mma8452 fsl,vf610-dac
- hoperf,hp03
- honeywell,hmc5843
- kionix,kxcjk1013
- maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
maxim,max31856 maxim,max31855k maxim,max44009
maxim,max5481 maxim,max5821
- meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
- mediatek,mt2701-auxadc
- melexis,mlx90614 melexis,mlx90632
- memsic,mmc35240(drop)
- microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
- murata,zap2326
- nxp,fxas21002c nxp,lpc1850-dac
- pni,rm3100
- qcom,pm8018-adc qcom,spmi-iadc
- renesas,isl29501 renesas,rcar-gyroadc
- samsung,sensorhub-rinato
- sensiron,sgp30
- sentech,sx9500
- sharp,gp2ap020a00f
- st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
- ti,adc084s021 ti,ads124s08
ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
- upisemi,us51882
- vishay,vcnl4035
- x-powers,axp209
New device support
* adi,ad5685
- Add support for AD5338R dual output 10-bit DAC
- Add DT-binding doc.
* mediatek,mt6360
- New driver for this SoC ADC with bindings and using new channel label
support in the IIO core.
* st,lsm6dsx
- Add support for LSM6DST
Core:
* Add "label" to device channels, provided via a new core callback. Including
DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup
Features
* semtech,sx9310
- Add control of hardware gain, proximity thresholds, hysteresis and
debounce.
- Increase what information on hardware configuration can be provided
via DT.
Cleanup and minor features
* adi,ad5685
- Add of_match_table
* adi,ad7292
- Drop pointless spi_set_drvdata() call
* adi,ad7298
- Drop platform data and tidy up external reference config.
* adi,ad7303
- Drop platform data handling as unused.
* adi,ad7768
- Add new label attribute for channels provided from dt.
* adi,ad7887
- devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
- Drop pointless spi_set_drvdata() call
* adi,adis16209
- Drop pointless spi_set_drvdata() call
* adi,adis16240
- White space fixup
* adi,adxl372
- use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
- Drop pointless semicolon.
* amstaos,tsl2563
- Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
- Use of_device_get_match_data() instead of open coding it.
- Constify some driver data
- Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
- Drop platform data as mostly dead code.
- Tidy up reference voltage logic
* atmel-sama5d2
- Drop a pointless semicolon
- Merge buffer and trigger init into a separate function
- Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
- Drop a pointless semicolon
* bosch,bmc150
- Drop a pointless semicolon
- Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
- Drop a pointless semicolon
* fsl,mma8452
- Constification
* (google),cros_ec
- Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
- Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
- Drop a pointless semicolon
* invensense,icm426xx
- Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
- Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
- Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
- Stop relying on users counter form input device in ISR.
* st,lsm6dsx
- add vdd and vddio regulator control (including binding update)
* st,stm32-adc
- Tidy up code for dma transfers.
- Adapt clock duty cycle for proper functioning. Note no known problems
with existing boards.
* st,vl53l0x-i2c
- Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
- Put back i2c_device_id table as needed for greybus probing.
-----BEGIN PGP SIGNATURE-----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=kkcj
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 5.11 cycle
Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.
Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).
Listed by manufacturer
- dht11 temperature(drop)
- adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
adi,adis16480 adi,adf4350
- ams,as3935
- asahi-kasei,ak8974
- atmel,sama5d2-adc
- avago,apds9300 avago,apds9960
- bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
- brcm,iproc-static-adc
- capella,cm36651
- domintech,dmard06(drop)
- fsl,mag3110 fsl,mma8452 fsl,vf610-dac
- hoperf,hp03
- honeywell,hmc5843
- kionix,kxcjk1013
- maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
maxim,max31856 maxim,max31855k maxim,max44009
maxim,max5481 maxim,max5821
- meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
- mediatek,mt2701-auxadc
- melexis,mlx90614 melexis,mlx90632
- memsic,mmc35240(drop)
- microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
- murata,zap2326
- nxp,fxas21002c nxp,lpc1850-dac
- pni,rm3100
- qcom,pm8018-adc qcom,spmi-iadc
- renesas,isl29501 renesas,rcar-gyroadc
- samsung,sensorhub-rinato
- sensiron,sgp30
- sentech,sx9500
- sharp,gp2ap020a00f
- st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
- ti,adc084s021 ti,ads124s08
ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
- upisemi,us51882
- vishay,vcnl4035
- x-powers,axp209
New device support
* adi,ad5685
- Add support for AD5338R dual output 10-bit DAC
- Add DT-binding doc.
* mediatek,mt6360
- New driver for this SoC ADC with bindings and using new channel label
support in the IIO core.
* st,lsm6dsx
- Add support for LSM6DST
Core:
* Add "label" to device channels, provided via a new core callback. Including
DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup
Features
* semtech,sx9310
- Add control of hardware gain, proximity thresholds, hysteresis and
debounce.
- Increase what information on hardware configuration can be provided
via DT.
Cleanup and minor features
* adi,ad5685
- Add of_match_table
* adi,ad7292
- Drop pointless spi_set_drvdata() call
* adi,ad7298
- Drop platform data and tidy up external reference config.
* adi,ad7303
- Drop platform data handling as unused.
* adi,ad7768
- Add new label attribute for channels provided from dt.
* adi,ad7887
- devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
- Drop pointless spi_set_drvdata() call
* adi,adis16209
- Drop pointless spi_set_drvdata() call
* adi,adis16240
- White space fixup
* adi,adxl372
- use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
- Drop pointless semicolon.
* amstaos,tsl2563
- Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
- Use of_device_get_match_data() instead of open coding it.
- Constify some driver data
- Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
- Drop platform data as mostly dead code.
- Tidy up reference voltage logic
* atmel-sama5d2
- Drop a pointless semicolon
- Merge buffer and trigger init into a separate function
- Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
- Drop a pointless semicolon
* bosch,bmc150
- Drop a pointless semicolon
- Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
- Drop a pointless semicolon
* fsl,mma8452
- Constification
* (google),cros_ec
- Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
- Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
- Drop a pointless semicolon
* invensense,icm426xx
- Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
- Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
- Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
- Stop relying on users counter form input device in ISR.
* st,lsm6dsx
- add vdd and vddio regulator control (including binding update)
* st,stm32-adc
- Tidy up code for dma transfers.
- Adapt clock duty cycle for proper functioning. Note no known problems
with existing boards.
* st,vl53l0x-i2c
- Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
- Put back i2c_device_id table as needed for greybus probing.
* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
...
This change switches to the new iio_triggered_buffer_setup_ext()
function and removes the iio_buffer_set_attrs() call, for assigning the
HW FIFO attributes to the buffer.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200929125949.69934-9-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change switches to the new devm_iio_triggered_buffer_setup_ext()
function and removes the iio_buffer_set_attrs() call, for assigning the
HW FIFO attributes to the buffer.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200929125949.69934-8-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Minimal and maximal frequencies supported by a sensor is queried.
On some older machines, these frequencies are not returned properly and
the EC returns 0 instead.
When returned maximal frequency is 0, ignore the information and use
default frequencies instead.
Fixes: ae7b02ad2f ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200630153730.3302889-1-gwendal@chromium.org
CC: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
cros-ec:
* Error code cleanup across cros-ec by Guenter.
* Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status.
cros_ec_typec:
* Landed initial USB4 support in typec connector class driver for cros_ec.
* Role switch bugfix on disconnect, and reordering configuration steps.
cros_ec_lightbar:
* Fix buffer outsize and result for get_lightbar_version.
misc:
* Remove config MFD_CROS_EC, now that transition from MFD is complete.
* Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCX5G2IAAKCRBzbaomhzOw
wo4JAQC7BcJJwYgoVnRQvYd4xXCEsl/F9cVFJJLRYAH/PA4x6gEA+wfdIxebAXbO
RapU2HOppxiQGFkr+0FX5xV+O7cRNAo=
=gkul
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros-ec:
- Error code cleanup across cros-ec by Guenter
- Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status
cros_ec_typec:
- Landed initial USB4 support in typec connector class driver for
cros_ec
- Role switch bugfix on disconnect, and reordering configuration
steps
cros_ec_lightbar:
- Fix buffer outsize and result for get_lightbar_version
misc:
- Remove config MFD_CROS_EC, now that transition from MFD is complete
- Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard
keymap"
* tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA
platform/chrome: Use kobj_to_dev() instead of container_of()
platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer()
platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites
platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config
platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
platform/chrome: cros_ec_trace: Add fields to command traces
platform/chrome: cros_ec_typec: Re-order connector configuration steps
platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect
platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()
platform/chrome: cros_ec_typec: USB4 support
pwm: cros-ec: Simplify EC error handling
platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT
pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
platform/chrome: cros_ec_sysfs: Report range of error codes from EC
cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status
iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
The intent here is to minimize the use of iio_buffer_set_attrs(). Since we
are planning to add support for multiple IIO buffers per IIO device, the
issue has to do with:
1. Accessing 'indio_dev->buffer' directly (as is done with
'iio_buffer_set_attrs(indio_dev->buffer, <attrs>)').
2. The way that the buffer attributes would get handled or expanded when
there are more buffers per IIO device. Current a sysfs kobj_type expands
into a 'device' object that expands into an 'iio_dev' object.
We will need to change this, so that the sysfs attributes for IIO
buffers expand into IIO buffers at some point.
Right now, the current IIO framework works fine for the
'1 IIO device == 1 IIO buffer' case (that is now).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20200923130339.997902-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use PLATFORM_DEVID_NONE define instead of "-1" value because:
- it brings some meaning,
- it might point attention why auto device ID was not used.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200921204939.20341-1-krzk@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A follow-up patch will extend the number of errors reported by
cros_ec_cmd_xfer_status(). Specifically, the function will return
-EOPNOTSUPP if a command is not supported by the EC. Prepare for it.
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
BMI160 Minimium gyroscope frequency in normal mode is 25Hz.
When older EC firmware do not report their sensors frequencies,
use 25Hz as the minimum for gyroscope to be sure it works on BMI160.
Fixes: ae7b02ad2f ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Probably due to docrot.
Fixes the following W=1 kernel build warning(s):
drivers/iio/common/ms_sensors/ms_sensors_i2c.c:186: warning: Function parameter or member 'client' not described in 'ms_sensors_read_serial'
drivers/iio/common/ms_sensors/ms_sensors_i2c.c:186: warning: Excess function parameter 'cli' description in 'ms_sensors_read_serial'
Cc: William Markezana <william.markezana@meas-spec.com>
Cc: Ludovic Tancerel <ludovic.tancerel@maplehightech.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do
if grep 'parent =' $file | grep -v trig | grep -vq devm_; then
echo "$file -> $(grep "parent =" $file)"
fi
done
-----------
The output is bearable [after the semantic patch is applied].
There is a mix of trigger assignments with some iio device parent
assignments that are removed via this patch.
JC: A few more added via inspection of all parent =
statements in drivers/iio. Some of these may just have crossed with this
series, others were less obvious to scripting due to some cross
file / module boundary calls.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
EC does not currently preserve range across sensor reinit.
If sensor is powered down at suspend, it will default to the EC default
range at resume, not the range set by the host.
Save range if modified, and apply at resume.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Usual mixed back but with a few subsystem wide or device type
wide cleanups.
New device support
* adis16475
- New driver supporting adis16470, adis16475, adis16477, adis16465,
adis16467, adis16500, adis16505 and adis16507.
Includes some rework of the adis library to simplify using it
for this new driver.
* ak8974
- Add support for Alps hscdt008a. ID only. Related patches add support
for scale.
* atlas-sensor
- Add support for RTD-SM OEM temperature sensor.
* cm32181
- Add support for CM3218 including support for SMBUS alert via
ACPI resources.
* ltc2632
- Add support for ltc2634-12/10/8 DACS including handling per
device type numbers of channels.
Major Features
* cm32181
- ACPI bindings including parsing CPM0 and CPM1 custom ACPI tables.
Includes minor tidy ups and fixes.
* vcnl4000
- Add event support
- Add buffered data capture support
- Add control of sampling frequency
Cleanups and minor fixes.
* core
- Trivial rework of iio_device_alloc to use an early return and
improve readability.
- Precursors to addition of multiple buffer support. So far
minor refactoring.
* subsystem wide
- Use get_unaligned_be24 slightly improve readability over open
coding it.
* adis drivers
- Use iio_get_debugfs_dentry access function.
* bh1780, cm32181, cm3232, gp2ap02a00f, opt3001, st_uvis25, vl6180,
dmard06, kxsd9
- Drop use of of_match_ptr to allow ACPI based probing via PRP0001.
Part of clear out of this to avoid cut and paste into new drivers.
* ad5592r, ad5593r
- Fix typos
* ad5933
- Use managed interfaces to automate error handling and remove.
* ak8974
- Fix wrong number of 'real bits' for buffered data.
- Refactor to pull measurement code out as separate function.
bmp280
- Fix lack of clamp on range during data capture.
* at91-sama5d2_adc
- Handle unfinished conversions correctly.
- Allow use of triggers other than it's own.
- Reorganize buffer setup and tear down as part of long running
subsystem wide rework.
* ccs811
- Add DT binding docs and match table.
- Support external reset and wakeup pins.
* hid-sensors
- Reorganize buffer setup and tear down as part of long running
subsystem wide rework.
* ltr501
- Constify some structs.
* vcnl4000
- Fix an endian issue by using explicit byte swapped i2c accessors.
-----BEGIN PGP SIGNATURE-----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=mYqq
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new device support, cleanups and features for IIO in the 5.8 cycle
Usual mixed back but with a few subsystem wide or device type
wide cleanups.
New device support
* adis16475
- New driver supporting adis16470, adis16475, adis16477, adis16465,
adis16467, adis16500, adis16505 and adis16507.
Includes some rework of the adis library to simplify using it
for this new driver.
* ak8974
- Add support for Alps hscdt008a. ID only. Related patches add support
for scale.
* atlas-sensor
- Add support for RTD-SM OEM temperature sensor.
* cm32181
- Add support for CM3218 including support for SMBUS alert via
ACPI resources.
* ltc2632
- Add support for ltc2634-12/10/8 DACS including handling per
device type numbers of channels.
Major Features
* cm32181
- ACPI bindings including parsing CPM0 and CPM1 custom ACPI tables.
Includes minor tidy ups and fixes.
* vcnl4000
- Add event support
- Add buffered data capture support
- Add control of sampling frequency
Cleanups and minor fixes.
* core
- Trivial rework of iio_device_alloc to use an early return and
improve readability.
- Precursors to addition of multiple buffer support. So far
minor refactoring.
* subsystem wide
- Use get_unaligned_be24 slightly improve readability over open
coding it.
* adis drivers
- Use iio_get_debugfs_dentry access function.
* bh1780, cm32181, cm3232, gp2ap02a00f, opt3001, st_uvis25, vl6180,
dmard06, kxsd9
- Drop use of of_match_ptr to allow ACPI based probing via PRP0001.
Part of clear out of this to avoid cut and paste into new drivers.
* ad5592r, ad5593r
- Fix typos
* ad5933
- Use managed interfaces to automate error handling and remove.
* ak8974
- Fix wrong number of 'real bits' for buffered data.
- Refactor to pull measurement code out as separate function.
bmp280
- Fix lack of clamp on range during data capture.
* at91-sama5d2_adc
- Handle unfinished conversions correctly.
- Allow use of triggers other than it's own.
- Reorganize buffer setup and tear down as part of long running
subsystem wide rework.
* ccs811
- Add DT binding docs and match table.
- Support external reset and wakeup pins.
* hid-sensors
- Reorganize buffer setup and tear down as part of long running
subsystem wide rework.
* ltr501
- Constify some structs.
* vcnl4000
- Fix an endian issue by using explicit byte swapped i2c accessors.
* tag 'iio-for-5.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (74 commits)
iio: light: ltr501: Constify structs
staging: iio: ad5933: attach life-cycle of kfifo buffer to parent device and use managed calls throughout
iio: bmp280: fix compensation of humidity
iio: light: cm32181: Fix integartion time typo
iio: light: cm32181: Add support for parsing CPM0 and CPM1 ACPI tables
iio: light: cm32181: Make lux_per_bit and lux_per_bit_base_it runtime settings
iio: light: cm32181: Use units of 1/100000th for calibscale and lux_per_bit
iio: light: cm32181: Change reg_init to use a bitmap of which registers to init
iio: light: cm32181: Handle CM3218 ACPI devices with 2 I2C resources
iio: light: cm32181: Clean up the probe function a bit
iio: light: cm32181: Add support for the CM3218
iio: light: cm32181: Add some extra register defines
iio: light: cm32181: Add support for ACPI enumeration
iio: light: cm32181: Switch to new style i2c-driver probe function
iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger
iio: vcnl4000: Add buffer support for VCNL4010/20.
iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
iio: vcnl4000: Add event support for VCNL4010/20.
iio: vcnl4000: Factorize data reading and writing.
iio: vcnl4000: Fix i2c swapped word reading.
...
The main intent here is to get rid of the iio_buffer_set_attrs() helper, or
at least rework it's usage a bit.
The problem with that helper is that it needs a pointer to the buffer,
which makes supporting multiple buffers per IIO device a bit more
cumbersome.
The hid_sensor_setup_trigger() is pretty much used in the same way:
- iio_triggered_buffer_setup() gets called before
- then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets
called which may attach some fifo attributes
This change merges the 2 together under the hid_sensor_setup_trigger()
function. Only the &iio_pollfunc_store_time is passed to all devices, so
it's not even required to pass it explicitly outside of the common
hid_sensor_setup_trigger() function.
Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common
place code can help the rework of the buffer code, since it is in one
place.
One detail of the change is that there are 2 drivers that use
devm_iio_triggered_buffer_setup(). That function gets implicitly
replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers
call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger,
the iio_triggered_buffer_cleanup() piggy backs on the
hid_sensor_remove_trigger() call, which should cover the cleanup.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use these functions instead of open-coding them.
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Javier Carrasco
Tzung-Bi Shih
Yiyuan Guo
Gwendal Grignou
Miquel Raynal
Dan Carpenter
Linus Torvalds
Daniel Lezcano
Jonathan Cameron
Andy Shevchenko
Tom Rix
Alexandru Ardelean
Cristian Marussi
Jyoti Bhayana
Ye Xiang
Alexandru Ardelean
Ahmad Fatoum
Greg Kroah-Hartman
Alexandre Belloni
Lorenzo Bianconi
Krzysztof Kozlowski
Guenter Roeck
Lee Jones
Keyur Patel