The downstream TLMM binding covers a group of TLMM-related hardware
blocks, but the upstream binding only captures the particular block
related to controlling the TLMM pins from an OS. In the translation of
the driver from downstream, the offset of 0x100000 was lost for the UFS
and SDC pingroups.
Fixes: d5d348a327 ("pinctrl: qcom: Add SM8350 pinctrl driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20211104170835.1993686-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It has been observed that dual edge triggered wakeirq GPIOs on SDM845
doesn't trigger interrupts on the falling edge.
Enabling wakeirq_dual_edge_errata for SDM845 indicates that the PDC in
SDM845 suffers from the same problem described, and worked around, by
Doug in 'c3c0c2e18d94 ("pinctrl: qcom: Handle broken/missing PDC dual
edge IRQs on sc7180")', so enable the workaround for SDM845 as well.
The specific problem seen without this is that gpio-keys does not detect
the falling edge of the LID gpio on the Lenovo Yoga C630 and as such
consistently reports the LID as closed.
Fixes: e35a6ae0eb ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211102034115.1946036-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
apple_gpio_irq_type can possibly return -EINVAL which triggers the
following compile error with gcc 9 because the type no longer fits
into the mask.
drivers/pinctrl/pinctrl-apple-gpio.c: In function 'apple_gpio_irq_set_type':
././include/linux/compiler_types.h:335:38: error: call to '__compiletime_assert_289' declared with attribute error: FIELD_PREP: value too large for the field
335 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
[...]
drivers/pinctrl/pinctrl-apple-gpio.c:294:7: note: in expansion of macro 'FIELD_PREP'
294 | FIELD_PREP(REG_GPIOx_MODE, irqtype));
| ^~~~~~~~~~
Fix this by making the return value always valid and instead checking
for REG_GPIOx_IN_IRQ_OFF in apple_gpio_irq_set_type and return -EINVAL
from there.
Fixes: a0f160ffcb ("pinctrl: add pinctrl/GPIO driver for Apple SoCs")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20211101150640.46553-1-sven@svenpeter.dev
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When PINCTRL_QCOM_SPMI_PMIC or PINCTRL_QCOM_SSBI_PMIC
is selected, and GPIOLIB is not selected, Kbuild
gives the following warnings:
WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP
Depends on [n]: GPIOLIB [=n]
Selected by [y]:
- PINCTRL_QCOM_SPMI_PMIC [=y] && PINCTRL [=y] && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && OF [=y] && SPMI [=y]
WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP
Depends on [n]: GPIOLIB [=n]
Selected by [y]:
- PINCTRL_QCOM_SSBI_PMIC [=y] && PINCTRL [=y] && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && OF [=y]
This is because these config options enable GPIOLIB_IRQCHIP
without selecting or depending on GPIOLIB, despite
GPIOLIB_IRQCHIP depending on GPIOLIB.
These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20211029004610.35131-1-julianbraha@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Instead of returning const pointer from tegra_pinctrl_get_group()
the return value is being casted.
This change helps return const pointer.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On some Lenovo AMD Gen2 platforms the IRQ for the SCI and pinctrl drivers
are shared. Due to how the s2idle loop handling works, this case needs
an extra explicit check whether the interrupt was caused by SCI or by
the GPIO controller.
To fix this rework the existing IRQ handler function to function as a
checker and an IRQ handler depending on the calling arguments.
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1738
Reported-by: Joerie de Gram <j.de.gram@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20211101014853.6177-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- Add infrastructure for per-parent interrupt data to support
the Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC.
This is used in all modern Apple silicon such as the M1
laptops but also in at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO
driver to use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML.
-----BEGIN PGP SIGNATURE-----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=4Ms6
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The most interesting aspect is that we now have initial support for
the Apple pin controller as used in the M1 laptops and the iPhones
which is a step forward for using Linux efficiently on this Apple
silicon.
Core changes:
- Add infrastructure for per-parent interrupt data to support the
Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC. This is
used in all modern Apple silicon such as the M1 laptops but also in
at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to
use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML"
* tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits)
pinctrl: add pinctrl/GPIO driver for Apple SoCs
dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl
dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl
gpio: Allow per-parent interrupt data
pinctrl: tegra: Fix warnings and error
pinctrl: intel: Kconfig: Add configuration menu to Intel pin control
pinctrl: tegra: Use correct offset for pin group
pinctrl: core: fix possible memory leak in pinctrl_enable()
pinctrl: bcm2835: Allow building driver as a module
pinctrl: equilibrium: Fix function addition in multiple groups
pinctrl: tegra: Add pinmux support for Tegra194
pinctrl: tegra: include lpdr pin properties
pinctrl: mediatek: add support for MT7986 SoC
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: microchip sgpio: use reset driver
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding
dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells
pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip
pinctrl: qcom: spmi-mpp: hardcode IRQ counts
pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip
...
This driver adds support for the pinctrl / GPIO hardware found
on some Apple SoCs.
Co-developed-by: Stan Skowronek <stan@corellium.com>
Signed-off-by: Stan Skowronek <stan@corellium.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211026175815.52703-5-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Adding a configuration menu to hold many Intel pin control drivers
helps to make the display more concise.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Function tegra_pinctrl_gpio_request_enable() and
tegra_pinctrl_gpio_disable_free() uses pin offset instead
of group offset, causing the driver to use wrong offset
to enable gpio.
Add a helper function tegra_pinctrl_get_group() to parse the
pin group and determine correct offset.
Signed-off-by: Kartik K <kkartik@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://lore.kernel.org/r/20211025110959.27751-1-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the pinctrl-bcm2835 driver to support being built as as a module
by converting it to a module_platform_driver() with the appropriate
module license, authors and description.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://lore.kernel.org/r/20211019221127.1953001-1-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Ignore the same function with multiple groups.
Fix a typo in error print.
Fixes: 1948d5c51d ("pinctrl: Add pinmux & GPIO controller driver for a new SoC")
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Link: https://lore.kernel.org/r/20211020093815.20870-1-rtanwar@maxlinear.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit includes pinctrl driver for Mediatek MT7986
The difference of pinctrl between mt7986a and mt7986b
is that pin-41 to pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Link: https://lore.kernel.org/r/20211022124036.5291-3-sam.shih@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On lan966x platform when the switch gets reseted then also the sgpio
gets reseted. The fix for this is to extend also the sgpio driver to
call the reset driver which will be reseted only once by the first
driver that is probed.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20211018085754.1066056-3-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
spmi-mpp did not have any irqchip support so consumers of this in
device tree would need to call gpio[d]_to_irq() in order to get the
proper IRQ on the underlying PMIC. IRQ chips in device tree should be
usable from the start without the consumer having to make an additional
call to get the proper IRQ on the parent. This patch adds hierarchical
IRQ chip support to the spmi-mpp code to correct this issue.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-17-dmitry.baryshkov@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The probing of this driver calls platform_irq_count, which will
setup all of the IRQs that are configured in device tree. In
preparation for converting this driver to be a hierarchical IRQ
chip, hardcode the IRQ count based on the hardware type so that all
the IRQs are not configured immediately and are configured on an
as-needed basis later in the boot process.
This change will also allow for the removal of the interrupts property
later in this patch series once the hierarchical IRQ chip support is in.
This patch also removes the generic qcom,spmi-mpp OF match since we
don't know the number of pins. All of the existing upstream bindings
already include the more-specific binding.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-16-dmitry.baryshkov@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
ssbi-mpp did not have any irqchip support so consumers of this in
device tree would need to call gpio[d]_to_irq() in order to get the
proper IRQ on the underlying PMIC. IRQ chips in device tree should be
usable from the start without the consumer having to make an additional
call to get the proper IRQ on the parent. This patch adds hierarchical
IRQ chip support to the ssbi-mpp code to correct this issue.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-15-dmitry.baryshkov@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The probing of this driver calls platform_irq_count, which will
setup all of the IRQs that are configured in device tree. In
preparation for converting this driver to be a hierarchical IRQ
chip, hardcode the IRQ count based on the hardware type so that all
the IRQs are not configured immediately and are configured on an
as-needed basis later in the boot process.
This change will also allow for the removal of the interrupts property
later in this patch series once the hierarchical IRQ chip support is in.
This patch also removes the generic qcom,ssbi-mpp OF match since we
don't know the number of pins. All of the existing upstream bindings
already include the more-specific binding.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-14-dmitry.baryshkov@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some systems such as the Microsoft Surface Laptop 4 leave interrupts
enabled and configured for use in sleep states on boot, which cause
unexpected behaviour such as spurious wakes and failed resumes in
s2idle states.
As interrupts should not be enabled until they are claimed and
explicitly enabled, disabling any interrupts mistakenly left enabled by
firmware should be safe.
Signed-off-by: Sachi King <nakato@nakato.io>
Link: https://lore.kernel.org/r/20211009033240.21543-1-nakato@nakato.io
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If some bits in a pin Pull-Up control register (PUPR) control pin
pull-down instead of pin pull-up, there are two pinmux_bias_reg entries:
a first one with the puen field filled in, listing pins with pull-up
functionality, and a second one with the pud field filled in, listing
pins with pull-down functionality. On encountering the second entry,
where puen is NULL, the for-loop terminates early, causing the remaining
bias registers not to be checked. In addition, sh_pfc_check_bias_reg()
does not handle such entries.
Fix this by treating pinmux_bias_reg.puen and pinmux_bias_reg.pud the
same.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/29526d06fa223cffd785cdb264b756a202b11cea.1633615652.git.geert+renesas@glider.be
The GENMASK(h, l) macro creates a contiguous bitmask starting at bit
position @l and ending at position @h, inclusive.
This did not trigger any error checks, as the individual register fields
cover at most 3 of the 4 available bits.
Fixes: 08df16e07a ("pinctrl: sh-pfc: checker: Add drive strength register checks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8f82d6147fbe3367d4c83962480e97f58d9c96a2.1633615652.git.geert+renesas@glider.be
If some bits in a pin Pull-Up control register (PUPR) control pin
pull-down instead of pin pull-up, there are two pinmux_bias_reg entries:
a first one with the puen field filled in, listing pins with pull-up
functionality, and a second one with the pud field filled in, listing
pins with pull-down functionality. On encountering the second entry,
where puen is NULL, the for-loop terminates early, causing the remaining
bias registers not to be saved/restored during PSCI system suspend.
Fortunately this does not trigger on any supported system yet, as PSCI
is only used on R-Car Gen3 and RZ/G2 systems, which all have separate
pin Pull-Enable (PUEN) and pin Pull-Up/Down control (PUD) registers.
Avoid this ever becoming a problem by treating pinmux_bias_reg.puen and
pinmux_bias_reg.pud the same. Note that a register controlling both
pull-up and pull-down pins would be saved and restored twice, which is
harmless.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/59d2fbddff685b6a7a82ff17d2b37633e30e8860.1633615652.git.geert+renesas@glider.be
When resuming from low power, the driver attempts to restore the
configuration of some pins. This is done by a call to:
stm32_pinctrl_restore_gpio_regs(struct stm32_pinctrl *pctl, u32 pin)
where 'pin' must be a valid pin value (i.e. matching some 'groups->pin').
Fix the current implementation which uses some wrong 'pin' value.
Fixes: e2f3cf18c3 ("pinctrl: stm32: add suspend/resume management")
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20211008122517.617633-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since the 'st,package' property is optional, outputting the "No package
detected" warning-level log when the property is absent is unsuitable.
Remove that log.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20211008122454.617556-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit a49d784d5a.
The updated binding was wrong / invalid and has been reverted. There
isn't any upstream kernel DTS using it and Broadcom isn't known to use
it neither. There is close to zero chance this will cause regression for
anyone.
Actually in-kernel bcm5301x.dtsi still uses the old good binding and so
it's broken since the driver update. This revert fixes it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20211008205938.29925-3-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is one build fix for Arm platforms that ended up impacting most
architectures because of the way the drivers/firmware Kconfig file is
wired up:
The CONFIG_QCOM_SCM dependency have caused a number of randconfig
regressions over time, and some still remain in v5.15-rc4. The
fix we agreed on in the end is to make this symbol selected by any
driver using it, and then building it even for non-Arm platforms with
CONFIG_COMPILE_TEST.
To make this work on all architectures, the drivers/firmware/Kconfig
file needs to be included for all architectures to make the symbol
itself visible.
In a separate discussion, we found that a sound driver patch that is
pending for v5.16 needs the same change to include this Kconfig file,
so the easiest solution seems to have my Kconfig rework included in v5.15.
There is a small merge conflict against an earlier partial fix for the
QCOM_SCM dependency problems.
Finally, the branch also includes a small unrelated build fix for NOMMU
architectures.
Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=187C
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"There is one build fix for Arm platforms that ended up impacting most
architectures because of the way the drivers/firmware Kconfig file is
wired up:
The CONFIG_QCOM_SCM dependency have caused a number of randconfig
regressions over time, and some still remain in v5.15-rc4. The fix we
agreed on in the end is to make this symbol selected by any driver
using it, and then building it even for non-Arm platforms with
CONFIG_COMPILE_TEST.
To make this work on all architectures, the drivers/firmware/Kconfig
file needs to be included for all architectures to make the symbol
itself visible.
In a separate discussion, we found that a sound driver patch that is
pending for v5.16 needs the same change to include this Kconfig file,
so the easiest solution seems to have my Kconfig rework included in
v5.15.
Finally, the branch also includes a small unrelated build fix for
NOMMU architectures"
Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/
* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
qcom_scm: hide Kconfig symbol
firmware: include drivers/firmware/Kconfig unconditionally
Now that SCM can be a loadable module, we have to add another
dependency to avoid link failures when ipa or adreno-gpu are
built-in:
aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe':
ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available'
ld.lld: error: undefined symbol: qcom_scm_is_available
>>> referenced by adreno_gpu.c
>>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a
This can happen when CONFIG_ARCH_QCOM is disabled and we don't select
QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd
use a similar dependency here to what we have for QCOM_RPROC_COMMON,
but that causes dependency loops from other things selecting QCOM_SCM.
This appears to be an endless problem, so try something different this
time:
- CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on'
but that is simply selected by all of its users
- All the stubs in include/linux/qcom_scm.h can go away
- arm-smccc.h needs to provide a stub for __arm_smccc_smc() to
allow compile-testing QCOM_SCM on all architectures.
- To avoid a circular dependency chain involving RESET_CONTROLLER
and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement.
According to my testing this still builds fine, and the QCOM
platform selects this symbol already.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix duplicate port register on RZ/G2L,
- A minor improvement.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYVbW0AAKCRCKwlD9ZEnx
cN0bAP9QEve6bHzqf5I3/nIRMX36ePaRsjw8ZDXLqRdTylkr9QD9FGYdLY5HRZ7N
aibnftFS3skf6NtByYtyOA2htOXLlw4=
=+4Pj
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.16
- Fix duplicate port register on RZ/G2L,
- A minor improvement.
I2C pins's resistance value can be controlled by rsel register.
This patch provides rsel (resistance selection) setting on MT8195
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210924080632.28410-6-zhiyong.tao@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch supports rsel(resistance selection) feature for I2C pins.
It provides more resistance selection solution in different ICs.
It provides rsel define and si unit solution by identifying
"mediatek,rsel_resistance_in_si_unit" property in pio dtsi node.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210924080632.28410-5-zhiyong.tao@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently, if the GPIO is configured as output in the bootloader
and user changes the mode to input in HLOS, it would end up
getting configured as input/output. Functionally, this is fine;
however, there may be some requirements where the output needs
to be disabled so that it can be used only for input.
Add support to enable/disable output mode through "output-enable"
or "output-disable" pinctrl properties.
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631588246-4811-3-git-send-email-quic_subbaram@quicinc.com
[Drop copyright change which is already upstrean in -rcN]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove the duplicate port register 22h and replace it with missing port
register 21h.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922074140.22178-1-biju.das.jz@bp.renesas.com
Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
It's a porting of pinctrl-scuba driver from CAF msm-4.19 kernel. The
egpio and wake bits are removed.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210923033224.29719-3-shawn.guo@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds pincontrol driver for tlmm block found in SM6350 SoC
This patch is based on downstream copyleft code.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210923161450.15278-2-konrad.dybcio@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Bjorn Andersson
Arnd Bergmann
Sven Peter
Sergio Paracuellos
Julian Braha
Prathamesh Shete
Mario Limonciello
Linus Torvalds
Joey Gouly
Cai Huoqing
Yang Yingliang
Florian Fainelli
Rahul Tanwar
Suresh Mangipudi
Sam Shih
Horatiu Vultur
Dmitry Baryshkov
Chanho Park
Linus Walleij
Sachi King
Geert Uytterhoeven
Andrey Gusakov
Du Huanpeng
Fabien Dessenne
Rafał Miłecki
Kunihiko Hayashi
Luca Weiss
Zhiyong Tao
Subbaraman Narayanamurthy
Biju Das
Shawn Guo
Konrad Dybcio