commit 82d3ec1d89 ("ASoC: Use schema reference for sound-name-prefix")
added name-prefix.yaml schema and the same reference was used in couple
of other schemas. But this is causing following warning and the same is
fixed in current patch.
Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
audio-codec@34: 'sound-name-prefix' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
audio-codec@36: 'sound-name-prefix' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
Fixes: 82d3ec1d89 ("ASoC: Use schema reference for sound-name-prefix")
Reported-by: Rob Herring <robh+dt@kernel.org>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1632238860-16947-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in the module description. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210920184152.18109-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These are only assigned to the ops field in the snd_soc_dai_link struct
which is a pointer to const struct snd_soc_ops. Make them const to allow
the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210920193947.10237-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revert 6e8cc4ddce ("spi: tegra20-slink: Declare runtime suspend and
resume functions conditionally") which was mistakenly applied to the
ASoC tree not the SPI tree (where it was also applied.
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
SOF is marking all componet drivers with module_get_upon_open = 1 which works
fine with normal PCM streams, however on compressed side the module get upon
open is not supported. The module_get works when module_get_upon_open is not set
becasue the snd_soc_component_module_get_when_probe() will pass NULL for the
substream parameter of snd_soc_component_module_get().
In order to re-use the existing infrastructure for module_get, the proposal is
to convert the mark_module to void pointer (like the pm mark) and implement
matching code for the compressed open/free to pcm open/close.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: soc-component: Convert the mark_module to void*
ASoC: compress/component: Use module_get_when_open/put_when_close for
cstream
include/sound/soc-component.h | 14 ++++----
sound/soc/soc-component.c | 61 +++++++++++++++--------------------
sound/soc/soc-compress.c | 43 +++++++++++++++++++++---
3 files changed, 71 insertions(+), 47 deletions(-)
--
2.33.0
Earlier as part of series [0], support for ADMAIF and I/O modules (such
as I2S, DMIC and DSPK) was added. This series aims at exposing some of
the AHUB internal modules (listed below), which can be used for audio
pre or post processing.
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These modules can be plugged into audio paths and relevant processing
can be done. The MUX routes are extended to allow add or remove above
modules in the path via mixer controls. This is similar to how specific
ADMAIF channels are connected to relevant I/O module instances at the
moment.
Some of these modules can alter PCM parameters. Consider example of
resampler (44.1 -> 48 kHz) in the path.
aplay(44.1 kHz) -> ADMAIF -> SFC -> (48 kHz) I2S -> (48kHz) Codec
The modules following SFC should be using converted sample rate and DAIs
need to be configured accordingly. The audio-graph driver provides a
mechanism to fixup the new parameters which can be specified in DT for a
given DAI. Then core uses these new values via fixup callback and then
pass it to respective DAIs hw_param() callback. The "convert-rate",
described in [1], property can be used when there is rate conversion in
the audio path. Similarly "convert-channels" can be used when there is
channel conversion in the path. There is no "convert-xxx" property for
sample size conversions. It can be added if necessary.
[0] https://www.lkml.org/lkml/2020/7/21/1357
[1] Documentation/devicetree/bindings/sound/audio-graph-port.yaml
Changelog
=========
v1 -> v2
--------
* Put comments for soft reset application in the drivers.
* Split out mute/volume control logic in put() calls of MVC driver and
use separate callbacks for the respective kcontrols.
* Update kcontrol put() callback in MVC driver to return 1 whenever
there is change. Similar change is done in other drivers too.
* Use name-prefix.yaml reference for the driver documentation now.
* Add sound-name-prefix pattern for MIXER driver and use prefix
accordingly in DT.
Sameer Pujar (13):
ASoC: soc-pcm: Don't reconnect an already active BE
ASoC: simple-card-utils: Increase maximum DAI links limit to 512
ASoC: audio-graph: Fixup CPU endpoint hw_params in a BE<->BE link
ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules
ASoC: tegra: Add routes for few AHUB modules
ASoC: tegra: Add Tegra210 based MVC driver
ASoC: tegra: Add Tegra210 based SFC driver
ASoC: tegra: Add Tegra210 based AMX driver
ASoC: tegra: Add Tegra210 based ADX driver
ASoC: tegra: Add Tegra210 based Mixer driver
arm64: defconfig: Enable few Tegra210 based AHUB drivers
arm64: tegra: Add few AHUB devices for Tegra210 and later
arm64: tegra: Extend APE audio support on Jetson platforms
.../bindings/sound/nvidia,tegra210-adx.yaml | 76 +
.../bindings/sound/nvidia,tegra210-ahub.yaml | 20 +
.../bindings/sound/nvidia,tegra210-amx.yaml | 76 +
.../bindings/sound/nvidia,tegra210-mixer.yaml | 74 +
.../bindings/sound/nvidia,tegra210-mvc.yaml | 76 +
.../bindings/sound/nvidia,tegra210-sfc.yaml | 73 +
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 1554 ++++++++-
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 120 +
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 1493 +++++++-
.../arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 1520 ++++++++-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 116 +
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 876 +++++
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 876 +++++
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 77 +
arch/arm64/configs/defconfig | 5 +
include/sound/simple_card_utils.h | 2 +-
sound/soc/generic/audio-graph-card.c | 4 +-
sound/soc/soc-pcm.c | 4 +
sound/soc/tegra/Kconfig | 48 +
sound/soc/tegra/Makefile | 10 +
sound/soc/tegra/tegra210_adx.c | 531 +++
sound/soc/tegra/tegra210_adx.h | 72 +
sound/soc/tegra/tegra210_ahub.c | 511 ++-
sound/soc/tegra/tegra210_amx.c | 600 ++++
sound/soc/tegra/tegra210_amx.h | 93 +
sound/soc/tegra/tegra210_mixer.c | 674 ++++
sound/soc/tegra/tegra210_mixer.h | 100 +
sound/soc/tegra/tegra210_mvc.c | 645 ++++
sound/soc/tegra/tegra210_mvc.h | 117 +
sound/soc/tegra/tegra210_sfc.c | 3549 ++++++++++++++++++++
sound/soc/tegra/tegra210_sfc.h | 78 +
31 files changed, 13647 insertions(+), 423 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
create mode 100644 sound/soc/tegra/tegra210_adx.c
create mode 100644 sound/soc/tegra/tegra210_adx.h
create mode 100644 sound/soc/tegra/tegra210_amx.c
create mode 100644 sound/soc/tegra/tegra210_amx.h
create mode 100644 sound/soc/tegra/tegra210_mixer.c
create mode 100644 sound/soc/tegra/tegra210_mixer.h
create mode 100644 sound/soc/tegra/tegra210_mvc.c
create mode 100644 sound/soc/tegra/tegra210_mvc.h
create mode 100644 sound/soc/tegra/tegra210_sfc.c
create mode 100644 sound/soc/tegra/tegra210_sfc.h
--
2.7.4
As part of the effort to remove our old APIs based on outdated terminology
update the Intel board drivers to use modern terminology.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20210920065508.7854-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct several errors in rt5682s dtschema:
1. The examples should be under "examples":
'example' is not one of ['$id', '$schema', 'title', 'description', 'examples', ...
2. Missing type for vendor properties
3. clock-names should be an array:
properties:clock-names:items: {'const': 'mclk'} is not of type 'array'
4. Example DTS should include headers:
[scripts/Makefile.lib:386: Documentation/devicetree/bindings/sound/realtek,rt5682s.example.dt.yaml] Error 1
5. Node name in example DTS misses unit address and does not match DT
convention (generic name):
Warning (reg_format): /example-0/rt5682s:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
6. Node address should be in size-cells:0 block in example DTS:
Warning (reg_format): /example-0/codec@1a:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Fixes: 50159fdb14 ("ASoC: dt-bindings: rt5682s: add bindings for rt5682s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210920112106.140918-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the ab8500 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210916141335.43818-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_get_ops() is not used and the struct sof_ops_table is only used by that
macro.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210920064156.4763-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This symbol is not used outside of rt5682s.c, so marks it static.
Fix the following sparse warning:
sound/soc/codecs/rt5682s.c:2848:39: warning: symbol
'rt5682s_soc_component_dev' was not declared. Should it be static?
sound/soc/codecs/rt5682s.c:2842:30: warning: symbol
'rt5682s_aif2_dai_ops' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1631955726-77693-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Mixer supports mixing of up to ten 7.1 audio input streams and
generate five outputs (each of which can be any combination of the
ten input streams)
This patch registers Mixer driver with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device.
The DAI driver exposes Mixer interfaces, which can be used to connect
different components in the ASoC layer. Makefile and Kconfig support
is added to allow build the driver. It can be enabled in the DT via
"nvidia,tegra210-amixer" compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-11-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Audio Demultiplexer (ADX) block takes an input stream with up to
16 channels and demultiplexes it into four output streams of up to 16
channels each. A byte RAM helps to form output frames by any combination
of bytes from the input frame. Its design is identical to that of byte
RAM in the AMX except that the data flow direction is reversed.
This patch registers ADX driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes ADX interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver. It can be enabled in the DT via "nvidia,tegra210-adx"
compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Audio Multiplexer (AMX) block can multiplex up to four input streams
each of which can have maximum 16 channels and generate an output stream
with maximum 16 channels. A byte RAM helps to form an output frame by
any combination of bytes from the input frames.
This patch registers AMX driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes AMX interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver. It can be enabled in the DT via "nvidia,tegra210-amx" for
Tegra210 and Tegra186. For Tegra194 and later, "nvidia,tegra194-amx" can
be used.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-9-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Sampling Frequency Converter (SFC) converts the sampling frequency
of the input signal from one frequency to another. It supports sampling
frequency conversions of streams of up to two channels (stereo).
This patch registers SFC driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes SFC interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver. It can be enabled in the DT via "nvidia,tegra210-sfc"
compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-8-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Master Volume Control (MVC) provides gain or attenuation to a digital
signal path. It can be used in input or output signal path for per-stream
volume control or it can be used as master volume control. The MVC block
has one input and one output. The input digital stream can be mono or
multi-channel (up to 7.1 channels) stream. An independent mute control is
also included in the MVC block.
This patch registers MVC driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes MVC interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver. It can be enabled in the DT via "nvidia,tegra210-mvc"
compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-7-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add routing support for following modules of AHUB:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These modules can be plugged into audio path as per the need using
routing controls similar to the already existing routes to I/O modules
such as I2S, DMIC and DSPK.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-6-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds YAML schema for DT bindings of few AHUB modules.
These devices will be registered as ASoC components and bindings
will be used on Tegra210 and later chips. The bindings for below
mentioned modules are added:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1631551342-25469-5-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When multiple components are connected back to back in an audio path,
hw_param fixup may be required for CPU or Codec endpoint of BE<->BE
DAI links. Currently fixup support is available for Codec and this
commit adds similar feature for CPU endpoint of a BE<->BE link.
For example a resampler component can be plugged into an audio path.
[ FE -> BE1 -> ... -> resampler -> ... BEn ]
The resampler DAI links can be:
BEx (CPU) -> resampler input (Codec)
resampler output (CPU) -> BEy (Codec)
Thus input and output sample rate parameters for resampler can be
fixed up as per the resample requirement.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1631551342-25469-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current limit of 128 is not sufficient when more components are
added to the audio map on Tegra210 and later platforms. Thus it is
resulting in probe failure.
The requirement is of nearly ~200 DAI links. To give sufficient room
for future additions the maximum limit is increased to 512 DAI links.
This is a preparatory patch to add more components like resampler,
mixer, multiplexers, demultiplexers and volume controllers to Tegra210
and later platforms.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1631551342-25469-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases, multiple FE components have the same BE component in their
respective DPCM paths. One such example would be a mixer component, which
can receive two or more inputs and sends a mixed output. In such cases,
to avoid reconfiguration of already active DAI (mixer output DAI in this
case), check the BE stream state to filter out the redundancy.
In summary, allow connection of BE if the respective current stream state
is either NEW or CLOSED.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the try_module_get() and module_put() is not possible for
compressed streams if the module_get_upon_open is set to 1 which means that\
the components are not protected in a same way as components when normal
audio is used.
SOF is setting module_get_upon_open to 1 for component drivers which works
correctly for audio stream but when compressed stream is used then the
module is not protected.
Convert the compress open and free operation to mimic the steps of it's
pcm counterpart to fix this issue.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210901095255.3617-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mark_module of the snd_soc_component is strict snd_pcm_substream type
which prevents it to be used by compressed streams.
Change the type to void* along with the snd_soc_component_module_get()
and snd_soc_component_module_put() to allow the same mark to be used by
compressed when it's module_get_upon_open is set to 1.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210901095255.3617-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
Rename the parameter for ipc_trace_message() to match it's content and use
%#x" for hexadecimal prints in remaining places.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: SOF: ipc: Clarify the parameter name for ipc_trace_message()
ASoC: SOF: ipc: Print 0x prefix for errors in
ipc_trace/stream_message()
sound/soc/sof/ipc.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--
2.33.0
As part of moving to remove the old style defines for the bus clocks update
the 88pm860x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210916140847.50900-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
From the name sof_arch_ops one can not decipher that these ops are DSP
architecture ops.
Rename it to dsp_arch_ops and change also the macro to retrieve the DSP
architecture specific ops as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210916130308.7969-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the snd_sof_dsp_send_msg() failed then we have already returned from
sof_ipc_tx_message_unlocked() with the error message.
There is no need to check if ret is really 0 after this and we can return
directly the return value from tx_wait_done()
At the same time make the remaining checks for error (ret) to match.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210916125725.25934-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev_err() in ipc_trace_message() and ipc_stream_message() is missing
the 0x prefix for the hexadecimal number when printed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210917085823.27222-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ipc_trace_message() receives the type not the ID.
Use the same naming as the ipc_stream_message() function: msg_type to
help the reader to follow the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210917085823.27222-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some headsets CS42L42 autodetect mode is not working correctly.
They will be detected as unknown types or as headphones. According
to the CS42L42 datasheet, if the headset autodetect failed,
then the driver should switch to manual mode and perform a manual steps sequence.
These steps were missing in the current driver code. This patch will add manual
mode fallback steps in case autodetect failed. The default behavior is not affected,
manual mode runs only when autodetect failed.
Tested for regression with autodetect with all known headsets - no regression.
Tested with all headsets customers reported as false detected:
Gumdrop DropTech B1 - detected as headset OK
HUAWEI AM115 - detected as headset OK
UGREEN EP103 - detected as headset OK
HONOR AM116 - detected as headset OK
Stefan Binding (1):
ASoC: cs42l42: Implement Manual Type detection as fallback
sound/soc/codecs/cs42l42.c | 104 ++++++++++++++++++++++++++++++++-----
sound/soc/codecs/cs42l42.h | 54 +++++++++++++++++++
2 files changed, 146 insertions(+), 12 deletions(-)
--
2.25.1
Hi,
The probe debug feature of SOF can be used to extract streams of data from a
given point of a pipeline for analysis.
The support is implemented by using the ALSA/ASoC compress support for the
capture stream, but the code can not be used by/for a normal compressed data
stream. It is a debug feature.
Merge the probe implementation in the core (compress.c/h and probe.c/h) into
one file: sof-probes.c/h
Rename the Intel HDA specific probe implementation from hda-compressc.c to
hda-probes.c
We also need to add IPC logging support for the probes messages and drop the
unused references to SOF compress to have reasonably clean code.
Regards,
Peter
---
Peter Ujfalusi (5):
ASoC: SOF: ipc: Add probe message logging to ipc_log_header()
ASoC: SOF: pcm: Remove non existent CONFIG_SND_SOC_SOF_COMPRESS
reference
ASoC: SOF: probe: Merge and clean up the probe and compress files
ASoC: SOF: Intel: Rename hda-compress.c to hda-probes.c
ASoC: SOF: sof-probes: Correct the function names used for
snd_soc_cdai_ops
Ranjani Sridharan (1):
ASoC: SOF: compress: move and export sof_probe_compr_ops
sound/soc/sof/Makefile | 3 +-
sound/soc/sof/compress.c | 147 ---------
sound/soc/sof/compress.h | 32 --
sound/soc/sof/core.c | 2 +-
sound/soc/sof/debug.c | 2 +-
sound/soc/sof/intel/Makefile | 2 +-
sound/soc/sof/intel/hda-dai.c | 16 +-
.../intel/{hda-compress.c => hda-probes.c} | 0
sound/soc/sof/ipc.c | 23 ++
sound/soc/sof/pcm.c | 6 +-
sound/soc/sof/probe.h | 85 ------
sound/soc/sof/sof-priv.h | 5 -
sound/soc/sof/{probe.c => sof-probes.c} | 280 +++++++++++-------
sound/soc/sof/sof-probes.h | 38 +++
14 files changed, 248 insertions(+), 393 deletions(-)
delete mode 100644 sound/soc/sof/compress.c
delete mode 100644 sound/soc/sof/compress.h
rename sound/soc/sof/intel/{hda-compress.c => hda-probes.c} (100%)
delete mode 100644 sound/soc/sof/probe.h
rename sound/soc/sof/{probe.c => sof-probes.c} (52%)
create mode 100644 sound/soc/sof/sof-probes.h
--
2.33.0
As part of retiring the old macros defining the DAI clocking mode in the
DAI format update the au1x drivers to use the new style macros.
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Atmel drivers to use the new style defines for clocking in DAI
formats.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Fix warnings and errors in DT bindings
Add newline at end of file
Replace 'unevaluatedProperties' with 'additionalProperties'
Add spi context to DT example
Add #sound-dai-cells to DT example
Rename to 'cirrus,cs35l41.yaml'
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210915191422.2371623-1-drhodes@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SAI1 instance to imx8m_dai array.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210916073725.359561-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Relocate the INIT_WORK() at the same place where we schedule the work to
make the code simpler and easier to follow.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210916124902.24248-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some headsets are not detected correctly by Automatic Type Detection
on cs42l42. Instead, Manual Type Detection can be used to give a
more accurate value.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210916102750.9212-2-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_cdai_ops have startup and shutdown callbacks defined unlike
the component callbacks where open and free is used.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210916103211.1573-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The hda-compress.c is implementing the SOF probe support for intel HDA
platforms using compress API.
To avoid the confusion, rename it to reflect this.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210916103211.1573-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe debug functionality is implemented via compress support and it
was spread across two set of files:
probe.c/h
compress.c/h
Merge the two files into sof-probes.s/h and clean them up by removing
unused struct definitions, functions. We can also move most of the
functions static as they are only used internally.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210916103211.1573-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_probe_compr_ops are not platform-specific. So move
it to common compress code and export the symbol. The
compilation of the common compress code is already dependent
on the selection of CONFIG_SND_SOC_SOF_DEBUG_PROBES, so no
need to check the Kconfig section for defining sof_probe_compr_ops
again.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210916103211.1573-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SND_SOC_SOF_COMPRESS is not valid Kconfig option, remove it.
At the same time remove the also the declaration of the non existent
sof_compressed_ops.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210916103211.1573-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Probe related messages are missing from the logging, for example the
PROBE_INIT would show up as:
ipc tx: 0xc0010000: unknown GLB command
ipc tx succeeded: 0xc0010000: unknown GLB command
Add code to handle the probe messages to have human readable output
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210916103211.1573-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_sof_debugfs_io_item() only used within debug.c, no need to export
it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210915122116.18317-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not access the sdev->bar[] directly to make the code generic, use the
new generic ops for handing the regions for debugfs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210915122116.18317-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the generic iomem callback for debugfs_add_region_item to avoid
regression when the core switches to use the generic interface for
the regions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210915122116.18317-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sameer Pujar
Colin Ian King
Shengjiu Wang
Rikard Falkeborn
Mark Brown
Wolfram Sang
Peter Ujfalusi
Krzysztof Kozlowski
Jiapeng Chong
David Rhodes
Charles Keepax
Viorel Suman
Vitaly Rodionov
Stefan Binding
Ranjani Sridharan