Our current FW loading process is the same for all FWs:
- Pin FW to GGTT at the start of the ggtt->uc_fw node
- Load the FW
- Unpin
This worked because we didn't have a case where 2 FWs would be loaded on
the same GGTT at the same time. On MTL, however, this can happen if both
GTs are reset at the same time, so we can't pin everything in the same
spot and we need to use separate offset. For simplicity, instead of
calculating the exact required size, we reserve a 2MB slot for each fw.
v2: fail fetch if FW is > 2MBs, improve comments (John)
v3: more comment improvements (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-3-daniele.ceraolospurio@intel.com
The FW binaries are independently loaded on each GT. On MTL, the memory
is shared so we could potentially re-use a single allocation, but on
discrete multi-gt platforms we are going to need independent copies,
so it is easier to do the same on MTL as well, given that the amount
of duplicated memory is relatively small (~500K).
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-2-daniele.ceraolospurio@intel.com
On MTL the primary GT doesn't have any media capabilities, so no video
engines and no HuC. We must therefore skip the HuC fetch and load on
that specific case. Given that other multi-GT platforms might have HuC
on the primary GT, we can't just check for that and it is easier to
instead check for the lack of VCS engines.
Based on code from Aravind Iddamsetty
v2: clarify which engine_mask is used for each GT and why (Tvrtko)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-1-daniele.ceraolospurio@intel.com
This workaround is added for Media tile of MTL A step. It is to help
pcode workaround which handles the hardware issue seen during package C2/C3
transitions due to RC6 entry/exit transitions on Media tile. As a part of
workaround pcode expect kmd to send mailbox message "media busy" when
components of Media tile are in use and "media idle" otherwise.
As per workaround description gucrc need to be disabled so enabled
host based RC for Media tile.
v2:
- Correct workaround id (Matt)
- Fix review comments (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103184559.2306481-1-badal.nilawar@intel.com
Run a workload on tiles simultaneously by requesting for RP0 frequency.
Pcode can however limit the frequency being granted due to throttling
reasons. This test checks if there is any throttling but does not fail
if RP0 is not granted due to throttle reasons
v2: Fix build error
v3: Use IS_ERR_OR_NULL to check worker
Addressed cosmetic review comments (Tvrtko)
v4: do not skip test on media engines if gt type is GT_MEDIA.
Use correct PERF_LIMIT_REASONS register for MTL (Vinay)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109112541.275021-2-riana.tauro@intel.com
Convert some usages of legacy DRM logging macros into versions which tell
us on which device have the events occurred.
v2:
* Don't have struct drm_device as local. (Jani, Ville)
v3:
* Store gt, not i915, in workaround list. (John)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109104633.2579245-1-tvrtko.ursulin@linux.intel.com
We rely on page_sizes.sg in setup_scratch_page() reporting the correct
value if the underlying sgl is not contiguous, however in
get_pages_internal() we are only looking at the layout of the created
pages when calculating the sg_page_sizes, and not the final sgl, which
could in theory be completely different. In such a situation we might
incorrectly think we have a 64K scratch page, when it is actually only
4K or similar split over multiple non-contiguous entries, which could
lead to broken behaviour when touching the scratch space within the
padding of a 64K GTT page-table. For most of the other backends we
already just call i915_sg_dma_sizes() on the final mapping, so rather
just move that into __i915_gem_object_set_pages() to avoid such issues
coming back to bite us later.
v2: Update missing conversion in gvt
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108103238.165447-1-matthew.auld@intel.com
Rather than getting some hard to debug uaf, add some warns to hopefully
catch issues with userfault_count being non-zero when destroying the
object. Also if we somehow add an object to lmem_userfault_list that
somehow doesn't map lmem.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7469
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107165414.56970-2-matthew.auld@intel.com
In the fault handler, make sure we check if the BO maps lmem after
we schedule the migration, since the current resource might change from
lmem to smem, if the pages are in the non-cpu visible portion of lmem.
This then leads to adding the object to the lmem_userfault_list even
though the current resource is no longer lmem. If we then destroy the
object, the list might still contain a link to the now free object, since
we only remove it if the object is still in lmem.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7469
Fixes: ad74457a6b ("drm/i915/dgfx: Release mmap on rpm suspend")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107165414.56970-1-matthew.auld@intel.com
Headers in include/ should be included using the system header #include
syntax.
Fixes: 887a193b4f ("drm/i915/pxp: add huc authentication and loading command")
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107140454.2680954-1-jani.nikula@intel.com
On MTL there are no BCS engines on the media GT, so we can't always use
BCS0 in the test. There is no actual reason to use a BCS engine over an
engine of a different class, so switch to using any available engine.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102214310.2829310-1-daniele.ceraolospurio@intel.com
There is no userspace user for this CS yet, we only need it for internal
kernel ops (e.g. HuC, PXP), so don't expose it.
v2: even if it's not exposed, rename the engine so it is easier to
identify in the debug logs (Matt)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102171047.2787951-6-daniele.ceraolospurio@intel.com
The GSC CS re-uses the same interrupt bits that the GSC used in older
platforms. This means that we can now have an engine interrupt coming
out of OTHER_CLASS, so we need to handle that appropriately.
v2: clean up the if statement for the engine irq (Tvrtko)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102171047.2787951-4-daniele.ceraolospurio@intel.com
Starting on MTL, the GSC is no longer managed with direct MMIO access,
but we instead have a dedicated command streamer for it. As a first step
for adding support for this CS, add the required definitions.
Note that, although it is now a CS, the GSC retains its old
class:instance value (OTHER_CLASS instance 6)
Bspec: 65308, 45605
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102171047.2787951-2-daniele.ceraolospurio@intel.com
The engine busyness stats has a worker function to do things like
64bit extend the 32bit hardware counters. The GuC's reset prepare
function flushes out this worker function to ensure no corruption
happens during the reset. Unforunately, the worker function has an
infinite wait for active resets to finish before doing its work. Thus
a deadlock would occur if the worker function had actually started
just as the reset starts.
The function being used to lock the reset-in-progress mutex is called
intel_gt_reset_trylock(). However, as noted it does not follow
standard 'trylock' conventions and exit if already locked. So rename
the current _trylock function to intel_gt_reset_lock_interruptible(),
which is the behaviour it actually provides. In addition, add a new
implementation of _trylock and call that from the busyness stats
worker instead.
v2: Rename existing trylock to interruptible rather than trying to
preserve the existing (confusing) naming scheme (review comments from
Tvrtko).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102192109.2492625-3-John.C.Harrison@Intel.com
If a context has already been registered prior to first submission
then context init code was not being called. The noticeable effect of
that was the scheduling priority was left at zero (meaning super high
priority) instead of being set to normal. This would occur with
kernel contexts at start of day as they are manually pinned up front
rather than on first submission. So add a call to initialise those
when they are pinned.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102192109.2492625-2-John.C.Harrison@Intel.com
Some of the GuC state dump messages were adding extra line feeds. When
printing via a DRM printer to dmesg, for example, that messes up the
log formatting as it loses any prefixing from the printer. Given that
the extra line feeds are just in the middle of random bits of GuC
state, there isn't any real need for them. So just remove them
completely.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031220007.4176835-1-John.C.Harrison@Intel.com
The conversion looks harmless, however the addr value is updated inside
the loop with the previous vm_end, which then incorrectly leads to
for_each_vma_range() iterating over stuff outside the range we care
about. Fix this by storing the end value separately. Also fix the case
where the range doesn't intersect with any vma, or if the vma itself
doesn't extend the entire range, which must mean we have hole at the
end. Both should result in an error, as per the previous behaviour.
v2: Fix the cases where the range is empty, or if there's a hole at
the end of the range
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7247
Testcase: igt@gem_userptr_blits@probe
Fixes: f683b9d613 ("i915: use the VMA iterator")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028130635.465839-1-matthew.auld@intel.com
Needed to bring in v6.1-rc1 which contains commit f683b9d613 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/series/110083/ .
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Driver Changes:
- Fix for #7306: [Arc A380] white flickering when using arc as a
secondary gpu (Matt A)
- Add Wa_18017747507 for DG2 (Wayne)
- Avoid spurious WARN on DG1 due to incorrect cache_dirty flag
(Niranjana, Matt A)
- Corrections to CS timestamp support for Gen5 and earlier (Ville)
- Fix a build error used with clang compiler on hwmon (GG)
- Improvements to LMEM handling with RPM (Anshuman, Matt A)
- Cleanups in dmabuf code (Mike)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com
UAPI Changes:
Cross-subsystem Changes:
- dma-buf: locking improvements
- firmware: New API in the RaspberryPi firmware driver used by vc4
Core Changes:
- client: Null pointer dereference fix in drm_client_buffer_delete()
- mm/buddy: Add back random seed log
- ttm: Convert ttm_resource to use size_t for its size, fix for an
undefined behaviour
Driver Changes:
- bridge:
- adv7511: use dev_err_probe
- it6505: Fix return value check of pm_runtime_get_sync
- panel:
- sitronix: Fixes and clean-ups
- lcdif: Increase DMA burst size
- rockchip: runtime_pm improvements
- vc4: Fix for a regression preventing the use of 4k @ 60Hz, and
further HDMI rate constraints check.
- vmwgfx: Cursor improvements
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCY2N8/gAKCRDj7w1vZxhR
xT1TAQDiwdSyL/bzOk/WYggmj5wmFqb2PPFbFRt/DOTLl52ZdwEAmtE9I2WKvY8w
sxZYF9gfFnQC3id7YwNs+CDb1kAangc=
=6GBd
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-11-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
- dma-buf: locking improvements
- firmware: New API in the RaspberryPi firmware driver used by vc4
Core Changes:
- client: Null pointer dereference fix in drm_client_buffer_delete()
- mm/buddy: Add back random seed log
- ttm: Convert ttm_resource to use size_t for its size, fix for an
undefined behaviour
Driver Changes:
- bridge:
- adv7511: use dev_err_probe
- it6505: Fix return value check of pm_runtime_get_sync
- panel:
- sitronix: Fixes and clean-ups
- lcdif: Increase DMA burst size
- rockchip: runtime_pm improvements
- vc4: Fix for a regression preventing the use of 4k @ 60Hz, and
further HDMI rate constraints check.
- vmwgfx: Cursor improvements
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103083437.ksrh3hcdvxaof62l@houat
The goal in launching the request smoketest is to have sufficient tasks
running across the system such that we are likely to detect concurrency
issues. We aim to have 2 tasks using the same engine, gt, device (each
level of locking around submission and signaling) running at the same
time. While tasks may not be running all the time as they synchronise
with the gpu, they will be running most of the time, in which case
having many more tasks than cores available is wasteful (and
dramatically increases the workload causing excess runtime). Aim to
limit the number of tasks such that there is at least 2 running per
engine, spreading surplus cores around the engines (rather than running
a task per core per engine.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102155709.31717-1-nirmoy.das@intel.com
Use REG_FIELD_PREP() and a constant value for hwm_field_scale_and_write()
If the first argument of FIELD_PREP() is not a compile-time constant value
or unsigned long long type, this routine of the __BF_FIELD_CHECK() macro
used internally by the FIELD_PREP() macro always returns false.
BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \
__bf_cast_unsigned(_reg, ~0ull), \
_pfx "type of reg too small for mask"); \
And it returns a build error by the option among the clang
compilation options. [-Werror,-Wtautological-constant-out-of-range-compare]
Reported build error while using clang compiler:
drivers/gpu/drm/i915/i915_hwmon.c:115:16: error: result of comparison of
constant 18446744073709551615 with expression of type 'typeof (_Generic((field_msk),
char: (unsigned char)0, unsigned char: (unsigned char)0, signed char: (unsigned char)0,
unsigned short: (unsigned short)0, short: (unsigned short)0, unsigned int:
(unsigned int)0, int: (unsigned int)0, unsigned long: (unsigned long)0, long:
(unsigned long)0, unsigned long long: (unsigned long long)0, long long:
(unsigned long long)0, default: (field_msk)))' (aka 'unsigned int') is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
bits_to_set = FIELD_PREP(field_msk, nval);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP'
__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK'
BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
./include/linux/build_bug.h:39:58: note: expanded from macro 'BUILD_BUG_ON_MSG'
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
./include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
v2: Use REG_FIELD_PREP() macro instead of FIELD_PREP() (Jani)
Fixes: 99f55efb79 ("drm/i915/hwmon: Power PL1 limit and TDP setting")
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
[Joonas: Wrapped commit message error line length to be more reasonable]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221029044230.32128-1-gwan-gyeong.mun@intel.com
Currently on DG1, which does not have LLC, we hit the below
warning while rebinding an userptr invalidated object.
WARNING: CPU: 4 PID: 13008 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:34 __i915_gem_object_set_pages+0x296/0x2d0 [i915]
...
RIP: 0010:__i915_gem_object_set_pages+0x296/0x2d0 [i915]
...
Call Trace:
<TASK>
i915_gem_userptr_get_pages+0x175/0x1a0 [i915]
____i915_gem_object_get_pages+0x32/0xb0 [i915]
i915_gem_object_userptr_submit_init+0x286/0x470 [i915]
eb_lookup_vmas+0x2ff/0xcf0 [i915]
? __intel_wakeref_get_first+0x55/0xb0 [i915]
i915_gem_do_execbuffer+0x785/0x21d0 [i915]
i915_gem_execbuffer2_ioctl+0xe7/0x3d0 [i915]
We shouldn't be setting the obj->cache_dirty for DGFX,
fix it.
Fixes: d70af57944 ("drm/i915/shmem: ensure flush during swap-in on non-LLC")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reported-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102051416.27327-1-niranjana.vishwanathapura@intel.com
As reported by Michał, the drm_mm and drm_buddy unit tests lost the
printk with seed value after they were refactored into KUnit.
Add kunit_info with seed value information to assure reproducibility.
Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028221755.340487-1-arthurgrillo@riseup.net
The drm_gem_vunmap() will crash with a NULL dereference if the passed
object pointer is NULL. It wasn't a problem before we added the locking
support to drm_gem_vunmap function because the mapping argument was always
NULL together with the object. Make drm_client_buffer_delete() to check
whether GEM is NULL before trying to unmap the GEM, it will happen on
framebuffer creation error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/dri-devel/Y1kFEGxT8MVlf32V@kili/
Fixes: 79e2cf2e7a ("drm/gem: Take reservation lock for vmap/vunmap operations")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221030154412.8320-3-dmitry.osipenko@collabora.com
The dma_buf_detach() locks attach->dmabuf->resv and then unlocks
dmabuf->resv, which could be a two different locks from a static
code checker perspective. In particular this triggers Smatch to
report the "double unlock" error. Make the locking pointers consistent.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/dri-devel/Y1fLfsccW3AS%2Fo+%2F@kili/
Fixes: 809d9c72c2 ("dma-buf: Move dma_buf_attach() to dynamic locking specification")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221030154412.8320-2-dmitry.osipenko@collabora.com
Now that we know the ring timestamp frequency on gen4/5 we
can run the perf tests that depend on sampling the timestamp.
On g4x/ilk we must read the udw of the 64bit timestamp
register. Details in {g4x,gen5)_read_clock_frequency().
When executing the read via the CS i965 doesn't seem to need
the double read trick that CPU mmio reads need.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-7-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Now that we actually know the cs timestamp frequency on gen4/5
let's run the corresponding test.
On g4x/ilk we must read the udw of the 64bit timestamp
register. Details in {g4x,gen5)_read_clock_frequency().
The one extra caveat is that on i965 (or at least CL, don't
recall if I ever tested on BW) we must read the register
twice to get an up to date value. For some unknown reason
the first read tends to return a stale value.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-6-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
On ilk the UDW of TIMESTAMP increments every 1000 ns,
LDW is mbz. In order to represent that we'd need 52 bits,
but we only have 32 bits. Even worse most things want to
only deal with 32 bits of timestamp. So let's just set
up the timestamp frequency as if we only had the UDW.
On ctg/elk 63:20 of TIMESTAMP increments every 1/4 ns, 19:0
are mbz. To make life simpler let's ignore the LDW and set up
timestamp frequency based on the UDW only (increments every
1024 ns).
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-2-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
There are two command register files, CMD1 and CMD2, where only the CMD2
contains additional register sub-files BK0..3 . Pull the register file
selection call into separate function instead of duplicating it all over
the driver. The CMD2BK2 file is undocumented in datasheet, and is used
for BIST. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014231042.468033-1-marex@denx.de
The RTNI field is multiplied by 16 and incremented by 512 before being
used as the minimum number of pixel clock per horizontal line, hence
it is necessary to subtract those 512 bytes from htotal and then divide
the result by 16 before writing the value into the RTNI field. Fix the
calculation.
Fixes: de2b491784 ("drm/panel/panel-sitronix-st7701: Infer horizontal pixel count from TFT mode")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221012221159.88397-1-marex@denx.de
If a axi bus master with a higher priority do a lot of memory access
FIFO underruns can be inspected. Increase the burst size to 256B to
avoid such underruns and to improve the memory access efficiency.
Fixes: 9db35bb349 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101164615.778299-1-m.felsch@pengutronix.de
- More VBT specific code clean-up, doc, organization,
and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmNcHTsACgkQ+mJfZA7r
E8pXrwgAgYH8DQu+/C+gu4cB7wOQC+flrCAinCRaxE88q7iWDoQoY+XFdBLq9vEM
QWNAmnUG53+z1rW1+EAVoIDhRz7yYnsxScLj/FijJl52hNNP3QkZP4iZuAMJyQy2
NYDOQyzvLBGmOIDgz+4YBtqk28eiX8x0+sYSA/JuLU5lL1zXFeXt2pFt2kcAnT/S
Fe1MajA3TxLO9lAhnEzEUD3X/xLz5D/91BQS+7OL8n24Hxb9kBZ0N1UbwDOCDegc
NEGpQmJTJnkGTAEQ8tlqnvMgHUbGmm3OEImamfC2QGvIdolF8zax9baNKoUts7BZ
CaBDK2NK//W+sYl52Tig4pCv36bPdw==
=91XL
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2022-10-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Hotplug code clean-up and organization (Jani, Gustavo)
- More VBT specific code clean-up, doc, organization,
and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com
Cursor snooping depended on implicit size and format which made debugging
quite difficult. Make the code easier to following by making everything
explicit and instead of using magic numbers predefine all the
parameters the code depends on.
Also fixes incorrectly computed pitches for non-aligned cursor snoops.
Fix which has no practical effect because non-aligned cursor snoops
are not used by the X11 driver and Wayland cursors will go through
mob cursors, instead of surface dma's.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-2-zack@kde.org
Invalid userspace dma surface copies could potentially overflow
the memcpy from the surface to the snooped image leading to crashes.
To fix it the dimensions of the copybox have to be validated
against the expected size of the snooped cursor.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2ac863719e ("vmwgfx: Snoop DMA transfers with non-covering sizes")
Cc: <stable@vger.kernel.org> # v3.2+
Reviewed-by: Michael Banack <banackm@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-1-zack@kde.org
Update open coded for loop to use the standard scatterlist
for_each_sg API.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-4-matthew.auld@intel.com
Some minor cleanup of some variables for consistency.
Normalize struct sg_table to sgt.
Normalize struct dma_buf_attachment to attach.
checkpatch issues sizeof(), !NULL updates.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-3-matthew.auld@intel.com
Using PAGE_SIZE here potentially hides issues so bump that to something
larger. This should also make it possible for iommu to coalesce entries
for us. With that in place verify we can write from the GPU using the
importers sg_table, followed by checking that our writes match when read
from the CPU side.
v2: Switch over to igt_gpu_fill_dw(), which looks to be more widely
supported than the migrate stuff (at least OOTB).
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7306
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-2-matthew.auld@intel.com
We need to iterate over the original entries here for the sg_table,
pulling out the struct page for each one, to be remapped. However
currently this incorrectly iterates over the final dma mapped entries,
which is likely just one gigantic sg entry if the iommu is enabled,
leading to us only mapping the first struct page (and any physically
contiguous pages following it), even if there is potentially lots more
data to follow.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7306
Fixes: 1286ff7397 ("i915: add dmabuf/prime buffer sharing support.")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: <stable@vger.kernel.org> # v3.5+
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-1-matthew.auld@intel.com
Daniele Ceraolo Spurio
Tvrtko Ursulin
Badal Nilawar
Riana Tauro
Umesh Nerlige Ramappa
Matthew Auld
Jani Nikula
John Harrison
Joonas Lahtinen
Dave Airlie
Chris Wilson
Gwan-gyeong Mun
Niranjana Vishwanathapura
Arthur Grillo
Dmitry Osipenko
Gaosheng Cui
Ville Syrjälä
Marek Vasut
Wayne Boyer
Marco Felsch
Zack Rusin
Michael J. Ruhl