Граф коммитов

13620 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 4aabab2181 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (50 commits)
  [ARM] sa1100: remove boot time RTC initialisation
  [ARM] sa1100: stop doing our own rtc management over suspend
  [ARM] 4474/1: Do not check the PSR_F_BIT in valid_user_regs
  [ARM] 4473/2:  Take the HWCAP definitions out of the elf.h file
  [ARM] pxa: move platform devices to separate header file
  [ARM] pxa: move device registration into CPU-specific file
  [ARM] pxa: remove boot time RTC initialisation
  [ARM] pxa: stop doing our own rtc management over suspend
  [ARM] 4451/1: pxa: make dma.c generic and remove cpu specific dma code
  [ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq()
  [ARM] 4440/1: PXA: enable the checking of ICIP2 for IRQs
  [ARM] 4438/1: PXA: remove #ifdef .. #endif from pxa_gpio_demux_handler()
  [ARM] 4437/1: PXA: move the GPIO IRQ initialization code to pxa_init_irq_gpio()
  [ARM] 4436/1: PXA: move low IRQ initialization code to pxa_init_irq_low()
  [ARM] 4435/1: PXA: remove PXA_INTERNAL_IRQS
  [ARM] 4434/1: PXA: remove PXA_IRQ_SKIP
  [ARM] pxa: Fix PXA27x suspend type validation, remove pxa_pm_prepare()
  [ARM] pxa: move pm_ops structure into CPU specific files
  [ARM] pxa: introduce cpu_is_pxaXXX macros
  [ARM] pxa: remove MMC register defines from pxa-regs.h
  ...
2007-07-12 14:17:12 -07:00
Linus Torvalds 702ed6ef37 Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix sysfs_create_file return value handling
  [CPUFREQ] ondemand: fix tickless accounting and software coordination bug
  [CPUFREQ] ondemand: add a check to avoid negative load calculation
  [CPUFREQ] Keep userspace governor quiet when it is not being used
  [CPUFREQ] Longhaul - Proper register access
  [CPUFREQ] Kconfig powernow-k8 driver should depend on ACPI P-States driver
  [CPUFREQ] Longhaul - Replace ACPI functions with direct I/O
  [CPUFREQ] Longhaul - Remove duplicate multipliers
  [CPUFREQ] Longhaul - Embedded "conservative"
  [CPUFREQ] acpi-cpufreq: Proper ReadModifyWrite of PERF_CTL MSR
  [CPUFREQ] check return value of sysfs_create_file
  [CPUFREQ] Longhaul - Check ACPI "BM DMA in progress" bit
  [CPUFREQ] Longhaul - Move old_ratio to correct place
  [CPUFREQ] Longhaul - VT8237 support
  [CPUFREQ] Longhaul - Use all kinds of support
  [CPUFREQ] powernow-k8: clarify number of cores.
2007-07-12 13:42:43 -07:00
Linus Torvalds 0806ca2ab3 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Support multiple CPUs going through OS_MCA
  [IA64] silence GCC ia64 unused variable warnings
  [IA64] prevent MCA when performing MMIO mmap to PCI config space
  [IA64] add sn_register_pmi_handler oemcall
  [IA64] Stop bit for brl instruction
  [IA64] SN: Correct ROM resource length for BIOS copy
  [IA64] Don't set psr.ic and psr.i simultaneously
2007-07-12 13:41:29 -07:00
Linus Torvalds 21ba0f88ae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...
2007-07-12 13:40:57 -07:00
Linus Torvalds dc690d8ef8 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits)
  sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes
  sysfs: make directory dentries and inodes reclaimable
  sysfs: implement sysfs_get_dentry()
  sysfs: move sysfs_drop_dentry() to dir.c and make it static
  sysfs: restructure add/remove paths and fix inode update
  sysfs: use sysfs_mutex to protect the sysfs_dirent tree
  sysfs: consolidate sysfs spinlocks
  sysfs: make kobj point to sysfs_dirent instead of dentry
  sysfs: implement sysfs_find_dirent() and sysfs_get_dirent()
  sysfs: implement SYSFS_FLAG_REMOVED flag
  sysfs: rename sysfs_dirent->s_type to s_flags and make room for flags
  sysfs: make sysfs_drop_dentry() access inodes using ilookup()
  sysfs: Fix oops in sysfs_drop_dentry on x86_64
  sysfs: use singly-linked list for sysfs_dirent tree
  sysfs: slim down sysfs_dirent->s_active
  sysfs: move s_active functions to fs/sysfs/dir.c
  sysfs: fix root sysfs_dirent -> root dentry association
  sysfs: use iget_locked() instead of new_inode()
  sysfs: reorganize sysfs_new_indoe() and sysfs_create()
  sysfs: fix parent refcounting during rename and move
  ...
2007-07-12 13:40:20 -07:00
Linus Torvalds e1bd2ac5a6 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (183 commits)
  [TG3]: Update version to 3.78.
  [TG3]: Add missing NVRAM strapping.
  [TG3]: Enable auto MDI.
  [TG3]: Fix the polarity bit.
  [TG3]: Fix irq_sync race condition.
  [NET_SCHED]: ematch: module autoloading
  [TCP]: tcp probe wraparound handling and other changes
  [RTNETLINK]: rtnl_link: allow specifying initial device address
  [RTNETLINK]: rtnl_link API simplification
  [VLAN]: Fix MAC address handling
  [ETH]: Validate address in eth_mac_addr
  [NET]: Fix races in net_rx_action vs netpoll.
  [AF_UNIX]: Rewrite garbage collector, fixes race.
  [NETFILTER]: {ip, nf}_conntrack_sctp: fix remotely triggerable NULL ptr dereference (CVE-2007-2876)
  [NET]: Make all initialized struct seq_operations const.
  [UDP]: Fix length check.
  [IPV6]: Remove unneeded pointer idev from addrconf_cleanup().
  [DECNET]: Another unnecessary net/tcp.h inclusion in net/dn.h
  [IPV6]: Make IPV6_{RECV,2292}RTHDR boolean options.
  [IPV6]: Do not send RH0 anymore.
  ...

Fixed up trivial conflict in Documentation/feature-removal-schedule.txt
manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 13:31:22 -07:00
Russell King ca9ced7f67 Merge branches 'at91', 'davinci', 'imx', 'iop', 'ixp', 'ks8695', 'misc', 'pxa' and 's3c' into devel 2007-07-12 21:30:18 +01:00
Russell King fcae8e0988 [ARM] sa1100: remove boot time RTC initialisation
The RTC library code contains everything necessary to set the
system time from the RTC; for similar reasons as the previous
commit, it's far better to let the RTC library code sort this
out rather than implement something which might not be
appropriate for everyone.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 21:29:45 +01:00
Russell King f3ebbc20ab [ARM] sa1100: stop doing our own rtc management over suspend
Remove the RTC management over a suspend/resume cycle.  As per the
corresponding PXA patch, the RTC library code handles updating
system time on resume.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 21:29:06 +01:00
Linus Torvalds 0b9062f6b5 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Rename PC speaker code
  [MIPS] Don't use genrtc.
  [MIPS] Remove unused time.c for swarm
  [MIPS] Sparse: Use NULL for pointer
  [MIPS] Fix a sparse warning in arch/mips/pci/pci.c
  [MIPS] SMTC: Interrupt mask backstop hack
  [MIPS] separate platform_device registration for VR41xx RTC
  [MIPS] Separate platform_device registration for VR41xx GPIO
  [MIPS] MIPSsim: Fix build.
  [MIPS] separate platform_device registration for VR41xx serial interface
  [MIPS] Include cacheflush.h in uncache.c
  [MIPS] Cleanup tlbdebug.h
  [MIPS] Change names of local variables to silence sparse (part 2)
  [MIPS] Workaround for a sparse warning in include/asm-mips/io.h
  [MIPS] RM: Use only phyiscal address for 82596 and 53c710
  [MIPS] Hydrogen3: Remove remaining bits of code.
  [MIPS] DEC: Fix modpost warning.
  Revert "[MIPS] DEC: Fix modpost warning."
  [MIPS] Fix resume for 64K page size on R4000 class processors.
2007-07-12 13:28:54 -07:00
Linus Torvalds 82afee684f Merge master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits)
  Blackfin serial driver: supporting BF548-EZKIT serial port
  Video Console: Blackfin doesnt support VGA console
  Blackfin arch: Add peripheral io API to gpio header file
  Blackfin arch: set up gpio interrupt IRQ_PJ9 for BF54x ATAPI PATA driver
  Blackfin arch: add missing CONFIG_LARGE_ALLOCS when upstream merging
  Blackfin arch: as pointed out by Robert P. J. Day, update the CPU_FREQ name to match current Kconfig
  Blackfin arch: extract the entry point from the linked kernel
  Blackfin arch: clean up some coding style issues
  Blackfin arch: combine the common code of free_initrd_mem and free_initmem
  Blackfin arch: Add Support for Peripheral PortMux and resouce allocation
  Blackfin arch: use PAGE_SIZE when doing aligns rather than hardcoded values
  Blackfin arch: fix bug set dma_address properly in dma_map_sg
  Blackfin arch: Disable CACHELINE_ALIGNED_L1 for BF54x by default
  Blackfin arch: Port the dm9000 driver to Blackfin by using the correct low-level io routines
  Blackfin arch: There is no CDPRIO Bit in the EBIU_AMGCTL Register of BF54x arch
  Blackfin arch: scrub dead code
  Blackfin arch: Fix Warning add some defines in BF54x header file
  Blackfin arch: add BF54x missing GPIO access functions
  Blackfin arch: Some memory and code optimizations - Fix SYS_IRQS
  Blackfin arch: Enable BF54x PIN/GPIO interrupts
  ...
2007-07-12 13:25:24 -07:00
H. Peter Anvin c397368232 Remove old i386 setup code
This removes the old i386 setup code.  This is done as a separate patch
to avoid breaking git bisect as some of the i386 code was also used by
the old x86-64 code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:56 -07:00
H. Peter Anvin 91a6c462b0 Use the new x86 setup code for x86-64; unify with i386
This unifies arch/*/boot (except arch/*/boot/compressed) between
i386 and x86-64, and uses the new x86 setup code for x86-64 as well.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 4fd06960f1 Use the new x86 setup code for i386
This patch hooks the new x86 setup code into the Makefile machinery.  It
also adapts boot/tools/build.c to a two-file (as opposed to three-file)
universe, and simplifies it substantially.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin f2d98ae63d Linker script for the new x86 setup code
Linker script to define the layout of the new x86 setup code.
Includes assert for size overflow and a misaligned setup header.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 626073132b Assembly header and main routine for new x86 setup code
The assembly header and initialization code, and the main() routine.
main.c also contains some miscellaneous very short routines.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 7052fdd890 Code for actual protected-mode entry
This is the code which actually does the switch to protected mode,
including all preparation.  It is also responsible for invoking the
boot loader hooks, if present.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 5e8ddcbe86 Video mode probing support for the new x86 setup code
Video mode probing for the new x86 setup code.  This code breaks down
different drivers into modules.  This code deliberately drops support
for a lot of the vendor-specific mode probing present in the assembly
version, since a lot of those probes have been found to be stale in
current versions of those chips -- frequently, support for those modes
have been dropped from recent video BIOSes due to space constraints,
but the video BIOS signatures are still the same.

However, additional drivers should be extremely straightforward to plug
in, if desirable.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 337496eb73 Voyager support for the new x86 setup code
Voyager support for the new x86 setup code.  This implements the same
functionality as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 449f2ab946 Memory probing support for the new x86 setup code
Probe memory (INT 15h: E820, E801, 88).

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 3b53d3045b MCA support for new x86 setup code
MCA probing support for the new x86 setup code.  This implements the
same functionality as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin d13444a5a5 EDD probing code for the new x86 setup code
Probe EDD and MBR signatures, in order to make it easier to map
physical hard drives to BIOS drives.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 31b54f40e1 CPU features verification for the new x86 setup code
Verify that the CPU has enough features to run the kernel.  This may
entail enabling features on some CPUs.

By doing this in the setup code we can be guaranteed to still be able to
write to the console through the BIOS.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 0008ea39bd Version string for the new x86 setup code
Module which only includes the kernel version string.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 1543610ad7 Console-writing code for the new x86 setup code
This implements writing text to the console, including printf().

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin e44c22f65f Command-line parsing code for the new x86 setup code
Simple command-line parser which allows us to access the kernel command
line from the setup code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 49df18fa3f APM probing code
APM probing code for the new x86 setup code.  This implements the
same functionality as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 5a8a8128bc A20 handling code
A20 handling code for the new x86 setup code.  This implements the same
algorithms as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 5be8656615 String-handling functions for the new x86 setup code.
strcmp(), memcpy(), memset(), as well as routines to copy to and from
other segments (as pointed to by fs and gs).

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin ad7e906d56 Simple bitops for the new x86 setup code.
A simple collection of bitops for the new x86 setup code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin 62bd0337d0 Top header file for new x86 setup code
Top header file for the new x86 setup code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin f7f4a5fbd2 Header file to produce 16-bit code with gcc
gcc for i386 can be used with the assembly prefix ".code16gcc" to generate
16-bit (real-mode) code.  This header file provides the assembly prefix.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin 77e1dd654b x86-64: add CONFIG_PHYSICAL_ALIGN for consistency with i386
Add CONFIG_PHYSICAL_ALIGN (currently as a hardcoded constant) to provide
consistency with i386.  This value is manifest in the bzImage header.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin 48c7ae674f Make struct boot_params a real structure, and remove obsolete fields
Make struct boot_params a real structure, and remove the handling of
some obsolete fields, in particular hd*_info, which was only used by
the ST-506 driver, and likely to be wrong for that driver on any
modern BIOS.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin 9c25d134b3 Make definitions for struct e820entry and struct e820map consistent
Make definitions for struct e820entry and struct e820map
consistent between i386 and x86-64.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin 85414b693a Define zero-page offset 0x1e4 as a scratch field, and use it
The relocatable kernel code needs a scratch field for the decompressor
to determine its own location.  It was using a location inside
struct screen_info; reserve a free location and document it as scratch
instead.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
Venki Pallipadi 1d67953f2b Use a new CPU feature word to cover features that are spread around
Some Intel features are spread around in different CPUID leafs like 0x5,
0x6 and 0xA.  Make this feature detection code common across i386 and
x86_64.

Display Intel Dynamic Acceleration feature in /proc/cpuinfo. This feature
will be enabled automatically by current acpi-cpufreq driver.

Refer to Intel Software Developer's Manual for more details about the feature.

Thanks to hpa (H Peter Anvin) for the making the actual code detecting the
scattered features data-driven.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin de32e04175 x86 Kconfig: change X86_MINIMUM_CPU_MODEL to X86_MINIMUM_CPU_FAMILY
The X86_MINIMUM_CPU_MODEL name isn't really right, so change it to
X86_MINIMUM_CPU_FAMILY.  Also, the default minimum should be 3, not 0.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin ec481536b1 Unify the CPU features vectors between i386 and x86-64
Unify the handling of the CPU features vectors between i386 and x86-64.
This also adopts the collapsing of features which are required at
compile-time into constant tests from x86-64 to i386.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
Ralf Baechle de61b542b8 [MIPS] Rename PC speaker code
While the PC speaker is wired up to the i8254 there is more to the i8254
than just the PC speaker so this code was getting in the way under its
current name.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:23 +01:00
Ralf Baechle fdc1f93847 [MIPS] Don't use genrtc.
The only pseudo-legitimate MIPS user of genrtc was a systems that doesn't
have an RTC in hardware at all.  At this point faking one is a little
pointless ...
2007-07-12 17:41:21 +01:00
Yoichi Yuasa 1f2c6d6b0c [MIPS] Remove unused time.c for swarm
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:21 +01:00
Atsushi Nemoto 28fc582cc9 [MIPS] Sparse: Use NULL for pointer
This fixes a sparse warning:

arch/mips/kernel/traps.c:376:44: warning: Using plain integer as NULL pointer

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:20 +01:00
Atsushi Nemoto 8ed07a1cce [MIPS] Fix a sparse warning in arch/mips/pci/pci.c
Fixes this warning:

arch/mips/pci/pci.c:284:18: warning: symbol 'dev' shadows an earlier one
arch/mips/pci/pci.c:272:17: originally declared here

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:17 +01:00
Kevin D. Kissell 0db34215c7 [MIPS] SMTC: Interrupt mask backstop hack
To support multiple TC microthreads acting as "CPUs" within a VPE,
VPE-wide interrupt mask bits must be specially manipulated during
interrupt handling. To support legacy drivers and interrupt controller
management code, SMTC has a "backstop" to track and if necessary restore
the interrupt mask. This has some performance impact on interrupt service
overhead. Disable it only if you know what you are doing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:17 +01:00
Yoichi Yuasa bd0765098b [MIPS] separate platform_device registration for VR41xx RTC
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:15 +01:00
Yoichi Yuasa 44173fb2e8 [MIPS] Separate platform_device registration for VR41xx GPIO
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:15 +01:00
Ralf Baechle a74b460518 [MIPS] MIPSsim: Fix build.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:14 +01:00
Yoichi Yuasa 891649409e [MIPS] separate platform_device registration for VR41xx serial interface
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:13 +01:00
Atsushi Nemoto 8c41286edf [MIPS] Include cacheflush.h in uncache.c
This fixes this sparse warning:

arch/mips/lib/uncached.c:38:22: warning: symbol 'run_uncached' was not declared. Should it be static?

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:13 +01:00