[ Upstream commit 6d4341638516bf97b9a34947e0bd95035a8230a5 ]
Couple of Minor fixes:
- hcall return values are long. Fix that for h_get_mpp, h_get_ppp and
parse_ppp_data
- If hcall fails, values set should be at-least zero. It shouldn't be
uninitialized values. Fix that for h_get_mpp and h_get_ppp
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240412092047.455483-3-sshegde@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20933531be0577cdd782216858c26150dbc7936f ]
Move the prototypes into mpc10x.h which is included by all the relevant
C files, fixes:
arch/powerpc/platforms/embedded6xx/ls_uart.c:59:6: error: no previous prototype for 'avr_uart_configure'
arch/powerpc/platforms/embedded6xx/ls_uart.c:82:6: error: no previous prototype for 'avr_uart_send'
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240305123410.3306253-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daa8ab5904 ]
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again.
pseries_lpar_read_hblkrm_characteristics() ignores this, making it
possible to incorrectly detect TLB block invalidation characteristics
at boot.
Move the RTAS call into a coventional rtas_busy_delay()-based loop.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 1211ee61b4 ("powerpc/pseries: Read TLB Block Invalidate Characteristics")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-3-26929c8cce78@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d08633e5f ]
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again.
lparcfg's parse_system_parameter_string() ignores this, making it
possible to intermittently report incorrect SPLPAR characteristics.
Move the RTAS call into a coventional rtas_busy_delay()-based loop.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-4-26929c8cce78@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e64e71056f ]
pnv_ioda_setup_pe_res() calls opal to map a resource with a PE. However,
the code assumes the resource is allocated and it uses the resource
address to find out the segment(s) which need to be mapped to the
PE. In the unlikely case where the resource hasn't been allocated, the
computation for the segment number is garbage, which can lead to
invalid memory access and potentially a kernel crash, such as:
[ ] pci_bus 0002:02: Configuring PE for bus
[ ] pci 0002:02 : [PE# fc] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fc
[ ] BUG: Kernel NULL pointer dereference on write at 0x00000000
[ ] Faulting instruction address: 0xc00000000005eac4
[ ] Oops: Kernel access of bad area, sig: 7 [#1]
[ ] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
[ ] Modules linked in:
[ ] CPU: 12 PID: 1 Comm: swapper/20 Not tainted 5.10.50-openpower1 #2
[ ] NIP: c00000000005eac4 LR: c00000000005ea44 CTR: 0000000030061b9c
[ ] REGS: c000200007383650 TRAP: 0300 Not tainted (5.10.50-openpower1)
[ ] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44000224 XER: 20040000
[ ] CFAR: c00000000005eaa0 DAR: 0000000000000000 DSISR: 02080000 IRQMASK: 0
[ ] GPR00: c00000000005dd98 c0002000073838e0 c00000000185de00 c000200fff018960
[ ] GPR04: 00000000000000fc 0000000000000003 0000000000000000 0000000000000000
[ ] GPR08: 0000000000000000 0000000000000000 0000000000000000 9000000000001033
[ ] GPR12: 0000000031cb0000 c000000ffffe6a80 c000000000010a58 0000000000000000
[ ] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ ] GPR20: 0000000000000000 0000000000000000 0000000000000000 c00000000711e200
[ ] GPR24: 0000000000000100 c000200009501120 c00020000cee2800 00000000000003ff
[ ] GPR28: c000200fff018960 0000000000000000 c000200ffcb7fd00 0000000000000000
[ ] NIP [c00000000005eac4] pnv_ioda_setup_pe_res+0x94/0x1a0
[ ] LR [c00000000005ea44] pnv_ioda_setup_pe_res+0x14/0x1a0
[ ] Call Trace:
[ ] [c0002000073838e0] [c00000000005eb98] pnv_ioda_setup_pe_res+0x168/0x1a0 (unreliable)
[ ] [c000200007383970] [c00000000005dd98] pnv_pci_ioda_dma_dev_setup+0x43c/0x970
[ ] [c000200007383a60] [c000000000032cdc] pcibios_bus_add_device+0x78/0x18c
[ ] [c000200007383aa0] [c00000000028f2bc] pci_bus_add_device+0x28/0xbc
[ ] [c000200007383b10] [c00000000028f3a0] pci_bus_add_devices+0x50/0x7c
[ ] [c000200007383b50] [c00000000028f3c4] pci_bus_add_devices+0x74/0x7c
[ ] [c000200007383b90] [c00000000028f3c4] pci_bus_add_devices+0x74/0x7c
[ ] [c000200007383bd0] [c00000000069ad0c] pcibios_init+0xf0/0x104
[ ] [c000200007383c50] [c0000000000106d8] do_one_initcall+0x84/0x1c4
[ ] [c000200007383d20] [c0000000006910b8] kernel_init_freeable+0x264/0x268
[ ] [c000200007383dc0] [c000000000010a68] kernel_init+0x18/0x138
[ ] [c000200007383e20] [c00000000000cbfc] ret_from_kernel_thread+0x5c/0x80
[ ] Instruction dump:
[ ] 7f89e840 409d000c 7fbbf840 409c000c 38210090 4848f448 809c002c e95e0120
[ ] 7ba91764 38a00003 57a7043e 38c00000 <7c8a492e> 5484043e e87e0018 4bff23bd
Hitting the problem is not that easy. It was seen with a (semi-bogus)
PCI device with a class code of 0. The generic PCI framework doesn't
allocate resources in such a case.
The patch is simply skipping resources which are still flagged with
IORESOURCE_UNSET.
We don't have the problem with 64-bit mem resources, as the address of
the resource is checked to be within the range of the 64-bit mmio
window. See pnv_ioda_reserve_dev_m64_pe() and pnv_pci_is_m64().
Reported-by: Andrew Jeffery <andrew@aj.id.au>
Fixes: 23e79425fe ("powerpc/powernv: Simplify pnv_ioda_setup_pe_seg()")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230120093215.19496-1-fbarrat@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e123015c0ba859cf48aa7f89c5016cc6e98e018d ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: b9ef7b4b86 ("powerpc: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231126095739.1501990-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8649829a1dd25199bbf557b2621cedb4bf9b3050 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: 2717a33d60 ("powerpc/opal-irqchip: Use interrupt names if present")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127030755.1546750-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a260f2dd827bbc82cc60eb4f4d8c22707d80742 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Add a null pointer check, and release 'ent' to avoid memory leaks.
Fixes: bfd2f0d49a ("powerpc/powernv: Get rid of old scom_controller abstraction")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231208085937.107210-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd68ffce69f6cf8ddd3a3c32549d1d2275e49fc5 ]
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
dump_stack_lvl+0xa4/0xfc (unreliable)
print_report+0x214/0x63c
kasan_report+0x140/0x2e0
__asan_load8+0xa8/0xe0
dlpar_memory+0x298/0x1658
handle_dlpar_errorlog+0x130/0x1d0
dlpar_store+0x18c/0x3e0
kobj_attr_store+0x68/0xa0
sysfs_kf_write+0xc4/0x110
kernfs_fop_write_iter+0x26c/0x390
vfs_write+0x2d4/0x4e0
ksys_write+0xac/0x1a0
system_call_exception+0x268/0x530
system_call_vectored_common+0x15c/0x2ec
Allocated by task 1:
kasan_save_stack+0x48/0x80
kasan_set_track+0x34/0x50
kasan_save_alloc_info+0x34/0x50
__kasan_kmalloc+0xd0/0x120
__kmalloc+0x8c/0x320
kmalloc_array.constprop.0+0x48/0x5c
drmem_init+0x2a0/0x41c
do_one_initcall+0xe0/0x5c0
kernel_init_freeable+0x4ec/0x5a0
kernel_init+0x30/0x1e0
ret_from_kernel_user_thread+0x14/0x1c
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 51925fb3c5 ("powerpc/pseries: Implement memory hotplug remove in the kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-1-fb8f2bb7c557@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a74197b65e69c46fe6e53f7df2f4d6ce9ffe012 ]
Fix build errors when CURRITUCK=y and I2C is not builtin (=m or is
not set). Fixes these build errors:
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `avr_halt_system':
ppc476.c:(.text+0x58): undefined reference to `i2c_smbus_write_byte_data'
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `ppc47x_device_probe':
ppc476.c:(.init.text+0x18): undefined reference to `i2c_register_driver'
Fixes: 2a2c74b2ef ("IBM Akebono: Add the Akebono platform")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202312010820.cmdwF5X9-lkp@intel.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201055159.8371-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit feea65a338 upstream.
As reported by Mahesh & Aneesh, opal_prd_msg_notifier() triggers a
FORTIFY_SOURCE warning:
memcpy: detected field-spanning write (size 32) of single field "&item->msg" at arch/powerpc/platforms/powernv/opal-prd.c:355 (size 4)
WARNING: CPU: 9 PID: 660 at arch/powerpc/platforms/powernv/opal-prd.c:355 opal_prd_msg_notifier+0x174/0x188 [opal_prd]
NIP opal_prd_msg_notifier+0x174/0x188 [opal_prd]
LR opal_prd_msg_notifier+0x170/0x188 [opal_prd]
Call Trace:
opal_prd_msg_notifier+0x170/0x188 [opal_prd] (unreliable)
notifier_call_chain+0xc0/0x1b0
atomic_notifier_call_chain+0x2c/0x40
opal_message_notify+0xf4/0x2c0
This happens because the copy is targeting item->msg, which is only 4
bytes in size, even though the enclosing item was allocated with extra
space following the msg.
To fix the warning define struct opal_prd_msg with a union of the header
and a flex array, and have the memcpy target the flex array.
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reported-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Tested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230821142820.497107-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fb4ee2b30c ]
This drops rather useless ddw_enabled flag as direct_mapping implies
it anyway.
While at this, fix indents in enable_ddw().
This should not cause any behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211108040320.3857636-3-aik@ozlabs.ru
Stable-dep-of: 3bf983e4e93c ("powerpc/pseries/iommu: enable_ddw incorrectly returns direct mapping for SR-IOV device")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95f1a128cd728a7257d78e868f1f5a145fc43736 ]
If the vcpu_associativity alloc memory successfully but the
pcpu_associativity fails to alloc memory, the vcpu_associativity
memory leaks.
Fixes: d62c8deeb6 ("powerpc/pseries: Provide vcpu dispatch statistics")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1671003983-10794-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afda85b963 ]
If device_register() returns error in ibmebus_bus_init(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop
the reference count that was set in device_initialize() when it fails,
so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eac030b22e ]
lppaca_shared_proc() takes a pointer to the lppaca which is typically
accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads
to checking if preemption is enabled, for example:
BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693
caller is lparcfg_data+0x408/0x19a0
CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2
Call Trace:
dump_stack_lvl+0x154/0x200 (unreliable)
check_preemption_disabled+0x214/0x220
lparcfg_data+0x408/0x19a0
...
This isn't actually a problem however, as it does not matter which
lppaca is accessed, the shared proc state will be the same.
vcpudispatch_stats_procfs_init() already works around this by disabling
preemption, but the lparcfg code does not, erroring any time
/proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.
Instead of disabling preemption on the caller side, rework
lppaca_shared_proc() to not take a pointer and instead directly access
the lppaca, bypassing any potential preemption checks.
Fixes: f13c13a005 ("powerpc: Stop using non-architected shared_proc field in lppaca")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rework to avoid needing a definition in paca.h and lppaca.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4f913c980 ]
Currently pointer iov is being dereferenced before the null check of iov
which can lead to null pointer dereference errors. Fix this by moving the
iov null check before the dereferencing.
Detected using cppcheck static analysis:
linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either
the condition '!iov' is redundant or there is possible null pointer
dereference: iov. [nullPointerRedundantCheck]
num_vfs = iov->num_vfs;
^
Fixes: 052da31d45 ("powerpc/powernv/sriov: De-indent setup and teardown")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230608095849.1147969-1-colin.i.king@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4bda59b47 ]
The refcount on mm is dropped before the coprocessor is detached.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 7bc6f71bdf ("powerpc/vas: Define and use common vas_window struct")
Fixes: b22f2d88e4 ("powerpc/pseries/vas: Integrate API with open/close windows")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230607101024.14559-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9d2ccf00bd upstream.
Currently in tce_freemulti_pSeriesLP() there is no limit on how many
TCEs are passed to the H_STUFF_TCE hcall. This has not caused an issue
until now, but newer firmware releases have started enforcing a limit of
512 TCEs per call.
The limit is correct per the specification (PAPR v2.12 § 14.5.4.2.3).
The code has been in it's current form since it was initially merged.
Cc: stable@vger.kernel.org
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
[mpe: Tweak change log wording & add PAPR reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230525143454.56878-1-gbatra@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f7aacc5eb upstream.
For an SR-IOV device, while enabling DDW, a new table is created and
added at index 1 in the group. In the below 2 scenarios, the table is
incorrectly referenced at index 0 (which is where the table is for
default DMA window).
1. When adding DDW
This issue is exposed with "slub_debug". Error thrown out from
dma_iommu_dma_supported()
Warning: IOMMU offset too big for device mask
mask: 0xffffffff, table offset: 0x800000000000000
2. During Dynamic removal of the PCI device.
Error is from iommu_tce_table_put() since a NULL table pointer is
passed in.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505184701.91613-1-gbatra@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7b69600d4d ]
Use "%pa" format specifier for resource_size_t to avoid compiler
printk format warnings.
../arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/flipper-pic.c:148:9: note: in expansion of macro 'pr_info'
148 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
| ^~~~~~~
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:174:9: note: in expansion of macro 'pr_info'
174 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
| ^~~~~~~
../arch/powerpc/platforms/embedded6xx/wii.c: In function 'wii_ioremap_hw_regs':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/wii.c:77:17: note: in expansion of macro 'pr_info'
77 | pr_info("%s at 0x%08x mapped to 0x%p\n", name,
| ^~~~~~~
Fixes: 028ee972f0 ("powerpc: gamecube/wii: flipper interrupt controller support")
Fixes: 9c21025c78 ("powerpc: wii: hollywood interrupt controller support")
Fixes: 5a7ee3198d ("powerpc: wii: platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-3-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7538c97e2b ]
Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.
../arch/powerpc/platforms/512x/clock-commonclk.c: In function 'mpc5121_clk_provide_backwards_compat':
../arch/powerpc/platforms/512x/clock-commonclk.c:989:44: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
989 | snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
| ^~~~~~~~~ ~~~~~~~~~
| |
| resource_size_t {aka long long unsigned int}
Prevents 24 such warnings.
Fixes: 01f25c3716 ("clk: mpc512x: add backwards compat to the CCF code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b277fc793d ]
Platform device helper routines won't update the NUMA distance table
while creating a platform device, even if the device is present on a
NUMA node that doesn't have memory or CPU. This is especially true for
pmem devices. If the target node of the pmem device is not online, we
find the nearest online node to the device and associate the pmem device
with that online node. To find the nearest online node, we should have
the numa distance table updated correctly. Update the distance
information during the device probe.
For a papr scm device on NUMA node 3 distance_lookup_table value for
distance_ref_points_depth = 2 before and after fix is below:
Before fix:
node 3 distance depth 0 - 0
node 3 distance depth 1 - 0
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1
After fix
node 3 distance depth 0 - 3
node 3 distance depth 1 - 1
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1
Without the fix, the nearest numa node to the pmem device (NUMA node 3)
will be picked as 4. After the fix, we get the correct numa node which
is 5.
Fixes: da1115fdbd ("powerpc/nvdimm: Pick nearby online node if the device node is not online")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230404041433.1781804-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aafbfa5f5 ]
rtas-error-log-max is not the name of an RTAS function, so rtas_token()
is not the appropriate API for retrieving its value. We already have
rtas_get_error_log_max() which returns a sensible value if the property
is absent for any reason, so use that instead.
Fixes: 8d633291b4 ("powerpc/eeh: pseries platform EEH error log retrieval")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop no-longer possible error handling as noticed by ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-6-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3def164a5c ]
slot_errbuf_lock has declared and initialized by DEFINE_SPINLOCK,
so we don't need to spin_lock_init again, drop it.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1652232476-9696-1-git-send-email-baihaowen@meizu.com
Stable-dep-of: 9aafbfa5f5 ("powerpc/pseries/eeh: use correct API for error log size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d0eea4152 ]
If platform_device_add() is not called or failed, it can not call
platform_device_del() to clean up memory, it should call
platform_device_put() in error case.
Fixes: 26f6cb9993 ("[POWERPC] fsl_soc: add support for fsl_spi")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221029111626.429971-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5836947613 ]
The error handling path of mpc52xx_lpbfifo_probe() has a request_irq()
that is not balanced by a corresponding free_irq().
Add the missing call, as already done in the remove function.
Fixes: 3c9059d79f ("powerpc/5200: add LocalPlus bus FIFO device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dec1496d46ccd5311d0f6e9f9ca4238be11bf6a6.1643440531.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3e5d9e53e ]
Generally the hypervisor decides to allocate a window on different
VAS instances. But if user space wishes to allocate on the current VAS
instance where the process is executing, the kernel has to pass
associativity domain IDs to allocate VAS window HCALL.
To determine the associativity domain IDs for the current CPU,
smp_processor_id() is passed to node associativity HCALL which may
return H_P2 (-55) error during DLPAR CPU event. This is because Linux
CPU numbers (smp_processor_id()) are not the same as the hypervisor's
view of CPU numbers.
Fix the issue by passing hard_smp_processor_id() with
VPHN_FLAG_VCPU flag (PAPR 14.11.6.1 H_HOME_NODE_ASSOCIATIVITY).
Fixes: b22f2d88e4 ("powerpc/pseries/vas: Integrate API with open/close windows")
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Update change log to mention Linux vs HV CPU numbers]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/55380253ea0c11341824cd4c0fc6bbcfc5752689.camel@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71a92e99c4 ]
After using 'np' returned by of_find_node_by_path(), of_node_put()
need be called to decrease the refcount.
Fixes: 11fe909d23 ("powerpc/powernv: Add OPAL exports attributes to sysfs")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220906141703.118192-1-zhengyongjun3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d73b46c3c1 ]
The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.
This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.
This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 446cda1b21 ]
Since commit 4bf4f42a2f ("powerpc/kbuild: Set default generic
machine type for 32-bit compile"), when building a 32 bits kernel
with a bi-arch version of GCC, or when building a book3s/32 kernel,
the option -mcpu=powerpc is passed to GCC at all time, relying on it
being eventually overriden by a subsequent -mcpu=xxxx.
But when building the same kernel with a 32 bits only version of GCC,
that is not done, relying on gcc being built with the expected default
CPU.
This logic has two problems. First, it is a bit fragile to rely on
whether the GCC version is bi-arch or not, because today we can have
bi-arch versions of GCC configured with a 32 bits default. Second,
there are some versions of GCC which don't support -mcpu=powerpc,
for instance for e500 SPE-only versions.
So, stop relying on this approximative logic and allow the user to
decide whether he/she wants to use the toolchain's default CPU or if
he/she wants to set one, and allow only possible CPUs based on the
selected target.
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d4df724691351531bf46d685d654689e5dfa0d74.1657549153.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ef3d06f1b ]
The existing logic in KVM to support guests calling H_RANDOM only works
on Power8, because it looks for an RNG in the device tree, but on Power9
we just use darn.
In addition the existing code needs to work in real mode, so we have the
special cased powernv_get_random_real_mode() to deal with that.
Instead just have KVM call ppc_md.get_random_seed(), and do the real
mode check inside of there, that way we use whatever RNG is available,
including darn on Power9.
Fixes: e928e9cb36 ("KVM: PPC: Book3S HV: Add fast real-mode H_RANDOM implementation.")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Rebase on previous commit, update change log appropriately]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220727143219.2684192-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df5d4b616e ]
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
Add missing of_node_put() in the error path to avoid refcount leak.
Fixes: ce21b3c964 ("[CELL] add support for MSI on Axon-based Cell systems")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605065129.63906-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ac059dacf ]
of_find_node_by_path() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 0afacde3df ("[POWERPC] spufs: allow isolated mode apps by starting the SPE loader")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220603121543.22884-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9be013b2a9 ]
Commit 0e00a8c9fd ("powerpc: Allow CPU selection also on PPC32")
enlarged the CPU selection logic to PPC32 by removing depend to
PPC64, and failed to restrict that depend to E5500_CPU and E6500_CPU.
Fortunately that got unnoticed because -mcpu=8540 will override the
-mcpu=e500mc64 or -mpcu=e6500 as they are ealier, but that's
fragile and may no be right in the future.
Add back the depend PPC64 on E5500_CPU and E6500_CPU.
Fixes: 0e00a8c9fd ("powerpc: Allow CPU selection also on PPC32")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8abab4888da69ff78b73a56f64d9678a7bf684e9.1657549153.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 90b5d4fe0b upstream.
On a bare-metal Power8 system that doesn't have an "ibm,power-rng", a
malicious QEMU and guest that ignore the absence of the
KVM_CAP_PPC_HWRNG flag, and calls H_RANDOM anyway, will dereference a
NULL pointer.
In practice all Power8 machines have an "ibm,power-rng", but let's not
rely on that, add a NULL check and early return in
powernv_get_random_real_mode().
Fixes: e928e9cb36 ("KVM: PPC: Book3S HV: Add fast real-mode H_RANDOM implementation.")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220727143219.2684192-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8875028265 upstream.
The platform device for the rng must be created much later in boot.
Otherwise it tries to connect to a parent that doesn't yet exist,
resulting in this splat:
[ 0.000478] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_get() is being called.
[ 0.002925] [c000000002a0fb30] [c00000000073b0bc] kobject_get+0x8c/0x100 (unreliable)
[ 0.003071] [c000000002a0fba0] [c00000000087e464] device_add+0xf4/0xb00
[ 0.003194] [c000000002a0fc80] [c000000000a7f6e4] of_device_add+0x64/0x80
[ 0.003321] [c000000002a0fcb0] [c000000000a800d0] of_platform_device_create_pdata+0xd0/0x1b0
[ 0.003476] [c000000002a0fd00] [c00000000201fa44] pnv_get_random_long_early+0x240/0x2e4
[ 0.003623] [c000000002a0fe20] [c000000002060c38] random_init+0xc0/0x214
This patch fixes the issue by doing the platform device creation inside
of machine_subsys_initcall.
Fixes: f3eac42665 ("powerpc/powernv: wire up rng during setup_arch")
Cc: stable@vger.kernel.org
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Change "of node" to "platform device" in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220630121654.1939181-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e561e472a3 upstream.
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: a489043f46 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3eac42665 upstream.
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call.
Complicating things, however, is that POWER8 systems need some per-cpu
state and kmalloc, which isn't available at this stage. So we split
things up into an early phase and a later opportunistic phase. This
commit also removes some noisy log messages that don't add much.
Fixes: a4da0d50b2 ("powerpc: Implement arch_get_random_long/int() for powernv")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add of_node_put(), use pnv naming, minor change log editing]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621140849.127227-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20a9689b36 upstream.
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: c25769fdda ("powerpc/microwatt: Add support for hardware random number generator")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-2-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d51f86cfd8 upstream.
The dssall ("Data Stream Stop All") instruction is obsolete altogether
with other Data Cache Instructions since ISA 2.03 (year 2006).
LLVM IAS does not support it but PPC970 seems to be using it.
This switches dssall to .long as there is no much point in fixing LLVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-6-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5bb99fd409 ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from cpm_powersave_off().
Fixes: d164f6d4f9 ("powerpc/4xx: Add suspend and idle support")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192941.20955-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c127d130f6 ]
In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this
function is called to initialize registers for receive and fault
windows. But the real address is passed in winctx->rx_fifo for
receive windows and the virtual address for fault windows which
causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by
assigning only real address to rx_fifo in vas_rx_win_attr struct
for both receive and fault windows.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/338e958c7ab8f3b266fa794a1f80f99b9671829e.camel@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b74196af37 ]
Dump capture would fail if capture kernel is not of the endianess as the
production kernel, because the in-memory data structure (struct
opal_fadump_mem_struct) shared across production kernel and capture
kernel assumes the same endianess for both the kernels, which doesn't
have to be true always. Fix it by having a well-defined endianess for
struct opal_fadump_mem_struct.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161902744901.86147.14719228311655123526.stgit@hbathini
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a76e520ee ]
Since the IBM A2 CPU support was removed, see commit
fb5a515704 ("powerpc: Remove platforms/wsp and associated pieces"),
the only 64-bit Book3E CPUs we support are Freescale (NXP) ones.
However our Kconfig still allows configurating a kernel that has 64-bit
Book3E support, but no Freescale CPU support enabled. Such a kernel
would never boot, it doesn't know about any CPUs.
It also causes build errors, as reported by lkp, because
PPC_BARRIER_NOSPEC is not enabled in such a configuration:
powerpc64-linux-ld: arch/powerpc/net/bpf_jit_comp64.o:(.toc+0x0):
undefined reference to `powerpc_security_features'
To fix this, force PPC_FSL_BOOK3E to be selected whenever we are
building a 64-bit Book3E kernel.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220304061222.2478720-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8667d0d64d upstream.
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:1190: Error: unrecognized opcode: `stbcix'
{standard input}:1433: Error: unrecognized opcode: `lwzcix'
{standard input}:1453: Error: unrecognized opcode: `stbcix'
{standard input}:1460: Error: unrecognized opcode: `stwcix'
{standard input}:1596: Error: unrecognized opcode: `stbcix'
...
Rework to add assembler directives [1] around the instruction. Going
through them one by one shows that the changes should be safe. Like
__get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
which according to the name is specific to power9. And __raw_rm_read*()
are only called in things that are powernv or book3s_hv specific.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Cc: stable@vger.kernel.org
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Make commit subject more descriptive]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-2-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fe2640bd7a ]
In remove_phb_dynamic() we use &phb->io_resource, after we've called
device_unregister(&host_bridge->dev). But the unregister may have freed
phb, because pcibios_free_controller_deferred() is the release function
for the host_bridge.
If there are no outstanding references when we call device_unregister()
then phb will be freed out from under us.
This has gone mainly unnoticed, but with slub_debug and page_poison
enabled it can lead to a crash:
PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr"
#0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc
#1 [c0000000e4f075d0] oops_end at c000000000029608
#2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4
#3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8
#4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30
Data SLB Access [380] exception frame:
R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100
R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9
R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff
R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000
R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000
R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003
R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005
R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0
R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8
R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800
R30: c00000004d1d2400 R31: c00000004d1d2540
NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474
CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003
CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3
DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2
[NIP : release_resource+56]
[LR : release_resource+48]
#5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable)
#6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648
#7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io]
#8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io]
#9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c
#10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504
#11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868
#12 [c0000000e4f07c70] new_sync_write at c00000000054339c
#13 [c0000000e4f07d10] vfs_write at c000000000546624
#14 [c0000000e4f07d60] ksys_write at c0000000005469f4
#15 [c0000000e4f07db0] system_call_exception at c000000000030840
#16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168
To avoid it, we can take a reference to the host_bridge->dev until we're
done using phb. Then when we drop the reference the phb will be freed.
Fixes: 2dd9c11b9d ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)")
Reported-by: David Dai <zdai@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Link: https://lore.kernel.org/r/20220318034219.1188008-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fd46e551f ]
mpc8xx_pic_init() should return -ENOMEM instead of 0 when
irq_domain_add_linear() return NULL. This cause mpc8xx_pics_init to continue
executing even if mpc8xx_pic_host is NULL.
Fixes: cc76404fea ("powerpc/8xx: Fix possible device node reference leak")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220223070223.26845-1-hbh25y@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anjali K
Shrikanth Hegde
Michael Ellerman
Nathan Lynch
Frederic Barrat
Kunwu Chan
Randy Dunlap
Alexey Kardashevskiy
Wang Yufen
ruanjinjie
Russell Currey
Colin Ian King
Nicholas Piggin
Gaurav Batra
Aneesh Kumar K.V
Haowen Bai
Yang Yingliang
Christophe JAILLET
Haren Myneni
Zheng Yongjun
Christophe Leroy
Jason A. Donenfeld
Miaoqian Lin
Lv Ruyi
Hari Bathini
Anders Roxell
Hangyu Hua