Since the kernel will rely on a single canonical set of NOPs, make sure
objtool uses the exact same ones.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210312115749.136357911@infradead.org
Add an explicit __ignore_sync_check__ marker which will be used to mark
lines which are supposed to be ignored by file synchronization check
scripts, its advantage being that it explicitly denotes such lines in
the code.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210304174237.31945-4-bp@alien8.de
Commit ab234a260b ("x86/pv: Rework arch_local_irq_restore() to not
use popf") replaced "push %reg; popf" with something like: "test
$0x200, %reg; jz 1f; sti; 1:", which breaks the pushf/popf symmetry
that commit ea24213d80 ("objtool: Add UACCESS validation") relies
on.
The result is:
drivers/gpu/drm/amd/amdgpu/si.o: warning: objtool: si_common_hw_init()+0xf36: PUSHF stack exhausted
Meanwhile, commit c9c324dc22 ("objtool: Support stack layout changes
in alternatives") makes that we can actually use stack-ops in
alternatives, which means we can revert 1ff865e343 ("x86,smap: Fix
smap_{save,restore}() alternatives").
That in turn means we can limit the PUSHF/POPF handling of
ea24213d80 to those instructions that are in alternatives.
Fixes: ab234a260b ("x86/pv: Rework arch_local_irq_restore() to not use popf")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/YEY4rIbQYa5fnnEp@hirez.programming.kicks-ass.net
Teach objtool to parse options from the OBJTOOL_ARGS environment
variable.
This enables things like:
$ OBJTOOL_ARGS="--backup" make O=defconfig-build/ kernel/ponies.o
to obtain both defconfig-build/kernel/ponies.o{,.orig} and easily
inspect what objtool actually did.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210226110004.252553847@infradead.org
Ensure there's a single place that parses check_options, in
preparation for extending where to get options from.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210226110004.193108106@infradead.org
Teach objtool to write backups files, such that it becomes easier to
see what objtool did to the object file.
Backup files will be ${name}.orig.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/YD4obT3aoXPWl7Ax@hirez.programming.kicks-ass.net
When there's a SIB byte, the register otherwise denoted by r/m will
then be denoted by SIB.base REX.b will now extend this. SIB.index == SP
is magic and notes an index value zero.
This means that there's a bunch of alternative (longer) encodings for
the same thing. Eg. 'ModRM.mod != 3, ModRM.r/m = AX' can be encoded as
'ModRM.mod != 3, ModRM.r/m = SP, SIB.base = AX, SIB.index = SP' which is actually 4
different encodings because the value of SIB.scale is irrelevant,
giving rise to 5 different but equal encodings.
Support these encodings and clean up the SIB handling in general.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173627.472967498@infradead.org
Since the CFI_reg number now matches the instruction encoding order do
away with the op_to_cfi_reg[] and use direct assignment.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173627.362004522@infradead.org
Since we can now have multiple stack-ops per instruction, we don't
need to special case LEAVE and can simply emit the composite
operations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173627.253273977@infradead.org
Current LEA decoding is a bunch of special cases, properly decode the
instruction, with exception of full SIB and RIP-relative modes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173627.143250641@infradead.org
Make them match the instruction encoding numbering.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173627.033720313@infradead.org
rewind_stack_do_exit()
UNWIND_HINT_FUNC
/* Prevent any naive code from trying to unwind to our caller. */
xorl %ebp, %ebp
movq PER_CPU_VAR(cpu_current_top_of_stack), %rax
leaq -PTREGS_SIZE(%rax), %rsp
UNWIND_HINT_REGS
call do_exit
Does unspeakable things to the stack, which objtool currently fails to
detect due to a limitation in instruction decoding. This will be
rectified after which the above will result in:
arch/x86/entry/entry_64.o: warning: objtool: .text+0xab: unsupported stack register modification
Allow the UNWIND_HINT on the next instruction to suppress this, it
will overwrite the state anyway.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173626.918498579@infradead.org
The irq stack switching was moved out of the ASM entry code in course of
the entry code consolidation. It ended up being suboptimal in various
ways.
- Make the stack switching inline so the stackpointer manipulation is not
longer at an easy to find place.
- Get rid of the unnecessary indirect call.
- Avoid the double stack switching in interrupt return and reuse the
interrupt stack for softirq handling.
- A objtool fix for CONFIG_FRAME_POINTER=y builds where it got confused
about the stack pointer manipulation.
-----BEGIN PGP SIGNATURE-----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=Sqr1
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2021-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq entry updates from Thomas Gleixner:
"The irq stack switching was moved out of the ASM entry code in course
of the entry code consolidation. It ended up being suboptimal in
various ways.
This reworks the X86 irq stack handling:
- Make the stack switching inline so the stackpointer manipulation is
not longer at an easy to find place.
- Get rid of the unnecessary indirect call.
- Avoid the double stack switching in interrupt return and reuse the
interrupt stack for softirq handling.
- A objtool fix for CONFIG_FRAME_POINTER=y builds where it got
confused about the stack pointer manipulation"
* tag 'x86-entry-2021-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix stack-swizzle for FRAME_POINTER=y
um: Enforce the usage of asm-generic/softirq_stack.h
x86/softirq/64: Inline do_softirq_own_stack()
softirq: Move do_softirq_own_stack() to generic asm header
softirq: Move __ARCH_HAS_DO_SOFTIRQ to Kconfig
x86: Select CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK
x86/softirq: Remove indirection in do_softirq_own_stack()
x86/entry: Use run_sysvec_on_irqstack_cond() for XEN upcall
x86/entry: Convert device interrupts to inline stack switching
x86/entry: Convert system vectors to irq stack macro
x86/irq: Provide macro for inlining irq stack switching
x86/apic: Split out spurious handling code
x86/irq/64: Adjust the per CPU irq stack pointer by 8
x86/irq: Sanitize irq stack tracking
x86/entry: Fix instrumentation annotation
Patch series "kasan: HW_TAGS tests support and fixes", v4.
This patchset adds support for running KASAN-KUnit tests with the
hardware tag-based mode and also contains a few fixes.
This patch (of 15):
There's a number of internal KASAN functions that are used across multiple
source code files and therefore aren't marked as static inline. To avoid
littering the kernel function names list with generic function names,
prefix all such KASAN functions with kasan_.
As a part of this change:
- Rename internal (un)poison_range() to kasan_(un)poison() (no _range)
to avoid name collision with a public kasan_unpoison_range().
- Rename check_memory_region() to kasan_check_range(), as it's a more
fitting name.
Link: https://lkml.kernel.org/r/cover.1610733117.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I719cc93483d4ba288a634dba80ee6b7f2809cd26
Link: https://lkml.kernel.org/r/13777aedf8d3ebbf35891136e1f2287e2f34aaba.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Generate __mcount_loc in objtool (Peter Zijlstra)
- Support running objtool against vmlinux.o (Sami Tolvanen)
- Clang LTO enablement for x86 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=htKJ
-----END PGP SIGNATURE-----
Merge tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more clang LTO updates from Kees Cook:
"Clang LTO x86 enablement.
Full disclosure: while this has _not_ been in linux-next (since it
initially looked like the objtool dependencies weren't going to make
v5.12), it has been under daily build and runtime testing by Sami for
quite some time. These x86 portions have been discussed on lkml, with
Peter, Josh, and others helping nail things down.
The bulk of the changes are to get objtool working happily. The rest
of the x86 enablement is very small.
Summary:
- Generate __mcount_loc in objtool (Peter Zijlstra)
- Support running objtool against vmlinux.o (Sami Tolvanen)
- Clang LTO enablement for x86 (Sami Tolvanen)"
Link: https://lore.kernel.org/lkml/20201013003203.4168817-26-samitolvanen@google.com/
Link: https://lore.kernel.org/lkml/cover.1611263461.git.jpoimboe@redhat.com/
* tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: lto: force rebuilds when switching CONFIG_LTO
x86, build: allow LTO to be selected
x86, cpu: disable LTO for cpu.c
x86, vdso: disable LTO only for vDSO
kbuild: lto: postpone objtool
objtool: Split noinstr validation from --vmlinux
x86, build: use objtool mcount
tracing: add support for objtool mcount
objtool: Don't autodetect vmlinux.o
objtool: Fix __mcount_loc generation with Clang's assembler
objtool: Add a pass for generating __mcount_loc
This change adds a --noinstr flag to objtool to allow us to specify
that we're processing vmlinux.o without also enabling noinstr
validation. This is needed to avoid false positives with LTO when we
run objtool on vmlinux.o without CONFIG_DEBUG_ENTRY.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
With LTO, we run objtool on vmlinux.o, but don't want noinstr
validation. This change requires --vmlinux to be passed to objtool
explicitly.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
When objtool generates relocations for the __mcount_loc section, it
tries to reference __fentry__ calls by their section symbol offset.
However, this fails with Clang's integrated assembler as it may not
generate section symbols for every section. This patch looks up a
function symbol instead if the section symbol is missing, similarly
to commit e81e072443 ("objtool: Support Clang non-section symbols
in ORC generation").
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Add the --mcount option for generating __mcount_loc sections
needed for dynamic ftrace. Using this pass requires the kernel to
be compiled with -mfentry and CC_USING_NOP_MCOUNT to be defined
in Makefile.
Link: https://lore.kernel.org/lkml/20200625200235.GQ4781@hirez.programming.kicks-ass.net/
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[Sami: rebased, dropped config changes, fixed to actually use --mcount,
and wrote a commit message.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
- Make objtool work for big-endian cross compiles
- Make stack tracking via stack pointer memory operations match push/pop
semantics to prepare for architectures w/o PUSH/POP instructions.
- Add support for analyzing alternatives
- Improve retpoline detection and handling
- Improve assembly code coverage on x86
- Provide support for inlined stack switching
-----BEGIN PGP SIGNATURE-----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=0AHf
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2021-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Thomas Gleixner:
- Make objtool work for big-endian cross compiles
- Make stack tracking via stack pointer memory operations match
push/pop semantics to prepare for architectures w/o PUSH/POP
instructions.
- Add support for analyzing alternatives
- Improve retpoline detection and handling
- Improve assembly code coverage on x86
- Provide support for inlined stack switching
* tag 'objtool-core-2021-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
objtool: Support stack-swizzle
objtool,x86: Additionally decode: mov %rsp, (%reg)
x86/unwind/orc: Change REG_SP_INDIRECT
x86/power: Support objtool validation in hibernate_asm_64.S
x86/power: Move restore_registers() to top of the file
x86/power: Annotate indirect branches as safe
x86/acpi: Support objtool validation in wakeup_64.S
x86/acpi: Annotate indirect branch as safe
x86/ftrace: Support objtool vmlinux.o validation in ftrace_64.S
x86/xen/pvh: Annotate indirect branch as safe
x86/xen: Support objtool vmlinux.o validation in xen-head.S
x86/xen: Support objtool validation in xen-asm.S
objtool: Add xen_start_kernel() to noreturn list
objtool: Combine UNWIND_HINT_RET_OFFSET and UNWIND_HINT_FUNC
objtool: Add asm version of STACK_FRAME_NON_STANDARD
objtool: Assume only ELF functions do sibling calls
x86/ftrace: Add UNWIND_HINT_FUNC annotation for ftrace_stub
objtool: Support retpoline jump detection for vmlinux.o
objtool: Fix ".cold" section suffix check for newer versions of GCC
objtool: Fix retpoline detection in asm code
...
When objtool encounters the stack-swizzle:
mov %rsp, (%[tos])
mov %[tos], %rsp
...
pop %rsp
Inside a FRAME_POINTER=y build, things go a little screwy because
clearly we're not adjusting the cfa->base. This then results in the
pop %rsp not being detected as a restore of cfa->base so it will turn
into a regular POP and offset the stack, resulting in:
kernel/softirq.o: warning: objtool: do_softirq()+0xdb: return with modified stack frame
Therefore, have "mov %[tos], %rsp" act like a PUSH (it sorta is
anyway) to balance the things out. We're not too concerned with the
actual stack_size for frame-pointer builds, since we don't generate
ORC data for them anyway.
Fixes: aafeb14e9d ("objtool: Support stack-swizzle")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/YC6UC+rc9KKmQrkd@hirez.programming.kicks-ass.net
When exporting static_call_key; with EXPORT_STATIC_CALL*(), the module
can use static_call_update() to change the function called. This is
not desirable in general.
Not exporting static_call_key however also disallows usage of
static_call(), since objtool needs the key to construct the
static_call_site.
Solve this by allowing objtool to create the static_call_site using
the trampoline address when it builds a module and cannot find the
static_call_key symbol. The module loader will then try and map the
trampole back to a key before it constructs the normal sites list.
Doing this requires a trampoline -> key associsation, so add another
magic section that keeps those.
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210127231837.ifddpn7rhwdaepiu@treble
I've always been bothered by the endless (fragile) boilerplate for
rbtree, and I recently wrote some rbtree helpers for objtool and
figured I should lift them into the kernel and use them more widely.
Provide:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
Inlining and constant propagation should see the compiler inline the
whole thing, including the various compare functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Merge in the recent paravirt changes to resolve conflicts caused
by objtool annotations.
Conflicts:
arch/x86/xen/xen-asm.S
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Natively support the stack swizzle pattern:
mov %rsp, (%[tos])
mov %[tos], %rsp
...
pop %rsp
It uses the vals[] array to link the first two stack-ops, and detect
the SP to SP_INDIRECT swizzle.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Where we already decode: mov %rsp, %reg, also decode mov %rsp, (%reg).
Nothing should match for this new stack-op.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Currently REG_SP_INDIRECT is unused but means (%rsp + offset),
change it to mean (%rsp) + offset.
The reason is that we're going to swizzle stack in the middle of a C
function with non-trivial stack footprint. This means that when the
unwinder finds the ToS, it needs to dereference it (%rsp) and then add
the offset to the next frame, resulting in: (%rsp) + offset
This is somewhat unfortunate, since REG_BP_INDIRECT is used (by DRAP)
and thus needs to retain the current (%rbp + offset).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
The ORC metadata generated for UNWIND_HINT_FUNC isn't actually very
func-like. With certain usages it can cause stack state mismatches
because it doesn't set the return address (CFI_RA).
Also, users of UNWIND_HINT_RET_OFFSET no longer need to set a custom
return stack offset. Instead they just need to specify a func-like
situation, so the current ret_offset code is hacky for no good reason.
Solve both problems by simplifying the RET_OFFSET handling and
converting it into a more useful UNWIND_HINT_FUNC.
If we end up needing the old 'ret_offset' functionality again in the
future, we should be able to support it pretty easily with the addition
of a custom 'sp_offset' in UNWIND_HINT_FUNC.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/db9d1f5d79dddfbb3725ef6d8ec3477ad199948d.1611263462.git.jpoimboe@redhat.com
There's an inconsistency in how sibling calls are detected in
non-function asm code, depending on the scope of the object. If the
target code is external to the object, objtool considers it a sibling
call. If the target code is internal but not a function, objtool
*doesn't* consider it a sibling call.
This can cause some inconsistencies between per-object and vmlinux.o
validation.
Instead, assume only ELF functions can do sibling calls. This generally
matches existing reality, and makes sibling call validation consistent
between vmlinux.o and per-object.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/0e9ab6f3628cc7bf3bde7aa6762d54d7df19ad78.1611263461.git.jpoimboe@redhat.com
Objtool converts direct retpoline jumps to type INSN_JUMP_DYNAMIC, since
that's what they are semantically.
That conversion doesn't work in vmlinux.o validation because the
indirect thunk function is present in the object, so the intra-object
jump check succeeds before the retpoline jump check gets a chance.
Rearrange the checks: check for a retpoline jump before checking for an
intra-object jump.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/4302893513770dde68ddc22a9d6a2a04aca491dd.1611263461.git.jpoimboe@redhat.com
With my version of GCC 9.3.1 the ".cold" subfunctions no longer have a
numbered suffix, so the trailing period is no longer there.
Presumably this doesn't yet trigger a user-visible bug since most of the
subfunction detection logic is duplicated. I only found it when
testing vmlinux.o validation.
Fixes: 54262aa283 ("objtool: Fix sibling call detection")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/ca0b5a57f08a2fbb48538dd915cc253b5edabb40.1611263461.git.jpoimboe@redhat.com
The JMP_NOSPEC macro branches to __x86_retpoline_*() rather than the
__x86_indirect_thunk_*() wrappers used by C code. Detect jumps to
__x86_retpoline_*() as retpoline dynamic jumps.
Presumably this doesn't trigger a user-visible bug. I only found it
when testing vmlinux.o validation.
Fixes: 39b735332c ("objtool: Detect jumps to retpoline thunks")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/31f5833e2e4f01e3d755889ac77e3661e906c09f.1611263461.git.jpoimboe@redhat.com
Thanks to a recent binutils change which doesn't generate unused
symbols, it's now possible for thunk_64.o be completely empty without
CONFIG_PREEMPTION: no text, no data, no symbols.
We could edit the Makefile to only build that file when
CONFIG_PREEMPTION is enabled, but that will likely create confusion
if/when the thunks end up getting used by some other code again.
Just ignore it and move on.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1254
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
This is basically a revert of commit 644592d328 ("objtool: Fail the
kernel build on fatal errors").
That change turned out to be more trouble than it's worth. Failing the
build is an extreme measure which sometimes gets too much attention and
blocks CI build testing.
These fatal-type warnings aren't yet as rare as we'd hope, due to the
ever-increasing matrix of supported toolchains/plugins and their
fast-changing nature as of late.
Also, there are more people (and bots) looking for objtool warnings than
ever before, so even non-fatal warnings aren't likely to be ignored for
long.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The ORC unwinder showed a warning [1] which revealed the stack layout
didn't match what was expected. The problem was that paravirt patching
had replaced "CALL *pv_ops.irq.save_fl" with "PUSHF;POP". That changed
the stack layout between the PUSHF and the POP, so unwinding from an
interrupt which occurred between those two instructions would fail.
Part of the agreed upon solution was to rework the custom paravirt
patching code to use alternatives instead, since objtool already knows
how to read alternatives (and converging runtime patching infrastructure
is always a good thing anyway). But the main problem still remains,
which is that runtime patching can change the stack layout.
Making stack layout changes in alternatives was disallowed with commit
7117f16bf4 ("objtool: Fix ORC vs alternatives"), but now that paravirt
is going to be doing it, it needs to be supported.
One way to do so would be to modify the ORC table when the code gets
patched. But ORC is simple -- a good thing! -- and it's best to leave
it alone.
Instead, support stack layout changes by "flattening" all possible stack
states (CFI) from parallel alternative code streams into a single set of
linear states. The only necessary limitation is that CFI conflicts are
disallowed at all possible instruction boundaries.
For example, this scenario is allowed:
Alt1 Alt2 Alt3
0x00 CALL *pv_ops.save_fl CALL xen_save_fl PUSHF
0x01 POP %RAX
0x02 NOP
...
0x05 NOP
...
0x07 <insn>
The unwind information for offset-0x00 is identical for all 3
alternatives. Similarly offset-0x05 and higher also are identical (and
the same as 0x00). However offset-0x01 has deviating CFI, but that is
only relevant for Alt3, neither of the other alternative instruction
streams will ever hit that offset.
This scenario is NOT allowed:
Alt1 Alt2
0x00 CALL *pv_ops.save_fl PUSHF
0x01 NOP6
...
0x07 NOP POP %RAX
The problem here is that offset-0x7, which is an instruction boundary in
both possible instruction patch streams, has two conflicting stack
layouts.
[ The above examples were stolen from Peter Zijlstra. ]
The new flattened CFI array is used both for the detection of conflicts
(like the second example above) and the generation of linear ORC
entries.
BTW, another benefit of these changes is that, thanks to some related
cleanups (new fake nops and alt_group struct) objtool can finally be rid
of fake jumps, which were a constant source of headaches.
[1] https://lkml.kernel.org/r/20201111170536.arx2zbn4ngvjoov7@treble
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Create a new struct associated with each group of alternatives
instructions. This will help with the removal of fake jumps, and more
importantly with adding support for stack layout changes in
alternatives.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Decouple ORC entries from instructions. This simplifies the
control/data flow, and is going to make it easier to support alternative
instructions which change the stack layout.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Currently objtool headers are being included either by their base name
or included via ../ from a parent directory. In case of a base name usage:
#include "warn.h"
#include "arch_elf.h"
it does not make it apparent from which directory the file comes from.
To make it slightly better, and actually to avoid name clashes some arch
specific files have "arch_" suffix. And files from an arch folder have
to revert to including via ../ e.g:
#include "../../elf.h"
With additional architectures support and the code base growth there is
a need for clearer headers naming scheme for multiple reasons:
1. to make it instantly obvious where these files come from (objtool
itself / objtool arch|generic folders / some other external files),
2. to avoid name clashes of objtool arch specific headers, potential
obtool arch generic headers and the system header files (there is
/usr/include/elf.h already),
3. to avoid ../ includes and improve code readability.
4. to give a warm fuzzy feeling to developers who are mostly kernel
developers and are accustomed to linux kernel headers arranging
scheme.
Doesn't this make it instantly obvious where are these files come from?
#include <objtool/warn.h>
#include <arch/elf.h>
And doesn't it look nicer to avoid ugly ../ includes? Which also
guarantees this is elf.h from the objtool and not /usr/include/elf.h.
#include <objtool/elf.h>
This patch defines and implements new objtool headers arranging
scheme. Which is:
- all generic headers go to include/objtool (similar to include/linux)
- all arch headers go to arch/$(SRCARCH)/include/arch (to get arch
prefix). This is similar to linux arch specific "asm/*" headers but we
are not abusing "asm" name and calling it what it is. This also helps
to prevent name clashes (arch is not used in system headers or kernel
exports).
To bring objtool to this state the following things are done:
1. current top level tools/objtool/ headers are moved into
include/objtool/ subdirectory,
2. arch specific headers, currently only arch/x86/include/ are moved into
arch/x86/include/arch/ and were stripped of "arch_" suffix,
3. new -I$(srctree)/tools/objtool/include include path to make
includes like <objtool/warn.h> possible,
4. rewriting file includes,
5. make git not to ignore include/objtool/ subdirectory.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Correct objtool orc generation endianness problems to enable fully
functional x86 cross-compiles on big endian hardware.
Introduce bswap_if_needed() macro, which does a byte swap if target
endianness doesn't match the host, i.e. cross-compilation for little
endian on big endian and vice versa. The macro is used for conversion
of multi-byte values which are read from / about to be written to a
target native endianness ELF file.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Relocations generated in elf_rebuild_rel[a]_reloc_section() are broken
if objtool is built and run on a big endian system.
The following errors pop up during x86 cross-compilation:
x86_64-9.1.0-ld: fs/efivarfs/inode.o: bad reloc symbol index (0x2000000 >= 0x22) for offset 0 in section `.orc_unwind_ip'
x86_64-9.1.0-ld: final link failed: bad value
Convert those functions to use gelf_update_rel[a](), similar to what
elf_write_reloc() does.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Co-developed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Architectures without PUSH/POP instructions will always access the stack
though memory operations (SRC/DEST_INDIRECT). Make those operations have
the same effect on the CFA as PUSH/POP, with no stack pointer
modification.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
On arm64, the compiler can set the frame pointer either
with a move operation or with and add operation like:
add (SP + constant), BP
For a simple move operation, the CFA base is changed from SP to BP.
Handle also changing the CFA base when the frame pointer is set with
an addition instruction.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
A valid stack frame should contain both the return address and the
previous frame pointer value.
On x86, the return value is placed on the stack by the calling
instructions. On other architectures, the callee needs to explicitly
save the return address on the stack.
Add the necessary checks to verify a function properly sets up all the
elements of the stack frame.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Building with the Clang assembler shows the following warning:
arch/x86/kernel/ftrace_64.o: warning: objtool: missing symbol for insn at offset 0x16
The Clang assembler strips section symbols. That ends up giving
objtool's find_func_containing() much more test coverage than normal.
Turns out, find_func_containing() doesn't work so well for overlapping
symbols:
2: 000000000000000e 0 NOTYPE LOCAL DEFAULT 2 fgraph_trace
3: 000000000000000f 0 NOTYPE LOCAL DEFAULT 2 trace
4: 0000000000000000 165 FUNC GLOBAL DEFAULT 2 __fentry__
5: 000000000000000e 0 NOTYPE GLOBAL DEFAULT 2 ftrace_stub
The zero-length NOTYPE symbols are inside __fentry__(), confusing the
rbtree search for any __fentry__() offset coming after a NOTYPE.
Try to avoid this problem by not adding zero-length symbols to the
rbtree. They're rare and aren't needed in the rbtree anyway.
One caveat, this actually might not end up being the right fix.
Non-empty overlapping symbols, if they exist, could have the same
problem. But that would need bigger changes, let's see if we can get
away with the easy fix for now.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xfnP
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"Fix a segfault that occurs when built with Clang"
* tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix seg fault with Clang non-section symbols
The Clang assembler likes to strip section symbols, which means objtool
can't reference some text code by its section. This confuses objtool
greatly, causing it to seg fault.
The fix is similar to what was done before, for ORC reloc generation:
e81e072443 ("objtool: Support Clang non-section symbols in ORC generation")
Factor out that code into a common helper and use it for static call
reloc generation as well.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://github.com/ClangBuiltLinux/linux/issues/1207
Link: https://lkml.kernel.org/r/ba6b6c0f0dd5acbba66e403955a967d9fdd1726a.1607983452.git.jpoimboe@redhat.com
Several Makefiles in tools/ need to define the host toolchain variables.
Move their definition to tools/scripts/Makefile.include
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-2-jean-philippe@linaro.org
- Most of the changes are cleanups and reorganization to make the objtool code
more arch-agnostic. This is in preparation for non-x86 support.
Fixes:
- KASAN fixes.
- Handle unreachable trap after call to noreturn functions better.
- Ignore unreachable fake jumps.
- Misc smaller fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KX5o
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Most of the changes are cleanups and reorganization to make the
objtool code more arch-agnostic. This is in preparation for non-x86
support.
Other changes:
- KASAN fixes
- Handle unreachable trap after call to noreturn functions better
- Ignore unreachable fake jumps
- Misc smaller fixes & cleanups"
* tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf build: Allow nested externs to enable BUILD_BUG() usage
objtool: Allow nested externs to enable BUILD_BUG()
objtool: Permit __kasan_check_{read,write} under UACCESS
objtool: Ignore unreachable trap after call to noreturn functions
objtool: Handle calling non-function symbols in other sections
objtool: Ignore unreachable fake jumps
objtool: Remove useless tests before save_reg()
objtool: Decode unwind hint register depending on architecture
objtool: Make unwind hint definitions available to other architectures
objtool: Only include valid definitions depending on source file type
objtool: Rename frame.h -> objtool.h
objtool: Refactor jump table code to support other architectures
objtool: Make relocation in alternative handling arch dependent
objtool: Abstract alternative special case handling
objtool: Move macros describing structures to arch-dependent code
objtool: Make sync-check consider the target architecture
objtool: Group headers to check in a single list
objtool: Define 'struct orc_entry' only when needed
objtool: Skip ORC entry creation for non-text sections
objtool: Move ORC logic out of check()
...
applied to indirect function calls. Remove a data load (indirection) by
modifying the text.
They give the flexibility of function pointers, but with better
performance. (This is especially important for cases where
retpolines would otherwise be used, as retpolines can be pretty
slow.)
API overview:
DECLARE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL_NULL(name, typename);
static_call(name)(args...);
static_call_cond(name)(args...);
static_call_update(name, func);
x86 is supported via text patching, otherwise basic indirect calls are used,
with function pointers.
There's a second variant using inline code patching, inspired by jump-labels,
implemented on x86 as well.
The new APIs are utilized in the x86 perf code, a heavy user of function pointers,
where static calls speed up the PMU handler by 4.2% (!).
The generic implementation is not really excercised on other architectures,
outside of the trivial test_static_call_init() self-test.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JvpF
-----END PGP SIGNATURE-----
Merge tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull static call support from Ingo Molnar:
"This introduces static_call(), which is the idea of static_branch()
applied to indirect function calls. Remove a data load (indirection)
by modifying the text.
They give the flexibility of function pointers, but with better
performance. (This is especially important for cases where retpolines
would otherwise be used, as retpolines can be pretty slow.)
API overview:
DECLARE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL_NULL(name, typename);
static_call(name)(args...);
static_call_cond(name)(args...);
static_call_update(name, func);
x86 is supported via text patching, otherwise basic indirect calls are
used, with function pointers.
There's a second variant using inline code patching, inspired by
jump-labels, implemented on x86 as well.
The new APIs are utilized in the x86 perf code, a heavy user of
function pointers, where static calls speed up the PMU handler by
4.2% (!).
The generic implementation is not really excercised on other
architectures, outside of the trivial test_static_call_init()
self-test"
* tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
static_call: Fix return type of static_call_init
tracepoint: Fix out of sync data passing by static caller
tracepoint: Fix overly long tracepoint names
x86/perf, static_call: Optimize x86_pmu methods
tracepoint: Optimize using static_call()
static_call: Allow early init
static_call: Add some validation
static_call: Handle tail-calls
static_call: Add static_call_cond()
x86/alternatives: Teach text_poke_bp() to emulate RET
static_call: Add simple self-test for static calls
x86/static_call: Add inline static call implementation for x86-64
x86/static_call: Add out-of-line static call implementation
static_call: Avoid kprobes on inline static_call()s
static_call: Add inline static call infrastructure
static_call: Add basic static call infrastructure
compiler.h: Make __ADDRESSABLE() symbol truly unique
jump_label,module: Fix module lifetime for __jump_label_mod_text_reserved()
module: Properly propagate MODULE_STATE_COMING failure
module: Fix up module_notifier return values
...
- Add deadlock detection for recursive read-locks. The rationale is outlined
in:
224ec489d3cd: ("lockdep/Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used to
switch between two copies of protected data. This allows the read path,
typically NMIs, to safely interrupt the write side critical section.
We utilize this new variant for sched-clock, and to make x86 TSC handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Iq51
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"These are the locking updates for v5.10:
- Add deadlock detection for recursive read-locks.
The rationale is outlined in commit 224ec489d3 ("lockdep/
Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used
to switch between two copies of protected data. This allows the
read path, typically NMIs, to safely interrupt the write side
critical section.
We utilize this new variant for sched-clock, and to make x86 TSC
handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes"
* tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"
lockdep: Fix lockdep recursion
lockdep: Fix usage_traceoverflow
locking/atomics: Check atomic-arch-fallback.h too
locking/seqlock: Tweak DEFINE_SEQLOCK() kernel doc
lockdep: Optimize the memory usage of circular queue
seqlock: Unbreak lockdep
seqlock: PREEMPT_RT: Do not starve seqlock_t writers
seqlock: seqcount_LOCKNAME_t: Introduce PREEMPT_RT support
seqlock: seqcount_t: Implement all read APIs as statement expressions
seqlock: Use unique prefix for seqcount_t property accessors
seqlock: seqcount_LOCKNAME_t: Standardize naming convention
seqlock: seqcount latch APIs: Only allow seqcount_latch_t
rbtree_latch: Use seqcount_latch_t
x86/tsc: Use seqcount_latch_t
timekeeping: Use seqcount_latch_t
time/sched_clock: Use seqcount_latch_t
seqlock: Introduce seqcount_latch_t
mm/swap: Do not abuse the seqcount_t latching API
time/sched_clock: Use raw_read_seqcount_latch() during suspend
...
encounter an MCE in kernel space but while copying from user memory by
sending them a SIGBUS on return to user space and umapping the faulty
memory, by Tony Luck and Youquan Song.
* memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
* New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
* Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the hw
eval phase and they don't make it into production.
* Misc fixes, improvements and cleanups, as always.
-----BEGIN PGP SIGNATURE-----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=u1Wg
-----END PGP SIGNATURE-----
Merge tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Extend the recovery from MCE in kernel space also to processes which
encounter an MCE in kernel space but while copying from user memory
by sending them a SIGBUS on return to user space and umapping the
faulty memory, by Tony Luck and Youquan Song.
- memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
- New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
- Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the
hw eval phase and they don't make it into production.
- Misc fixes, improvements and cleanups, as always.
* tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Allow for copy_mc_fragile symbol checksum to be generated
x86/mce: Decode a kernel instruction to determine if it is copying from user
x86/mce: Recover from poison found while copying from user space
x86/mce: Avoid tail copy when machine check terminated a copy from user
x86/mce: Add _ASM_EXTABLE_CPY for copy user access
x86/mce: Provide method to find out the type of an exception handler
x86/mce: Pass pointer to saved pt_regs to severity calculation routines
x86/copy_mc: Introduce copy_mc_enhanced_fast_string()
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
x86/mce: Drop AMD-specific "DEFERRED" case from Intel severity rule list
x86/mce: Add Skylake quirk for patrol scrub reported errors
RAS/CEC: Convert to DEFINE_SHOW_ATTRIBUTE()
x86/mce: Annotate mce_rd/wrmsrl() with noinstr
x86/mce/dev-mcelog: Do not update kflags on AMD systems
x86/mce: Stop mce_reign() from re-computing severity for every CPU
x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR
x86/mce: Increase maximum number of banks to 64
x86/mce: Delay clearing IA32_MCG_STATUS to the end of do_machine_check()
x86/MCE/AMD, EDAC/mce_amd: Remove struct smca_hwid.xec_bitmap
RAS/CEC: Fix cec_init() prototype
Pull KCSAN updates for v5.10 from Paul E. McKenney:
- Improve kernel messages.
- Be more permissive with bitops races under KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y.
- Optimize debugfs stat counters.
- Introduce the instrument_*read_write() annotations, to provide a
finer description of certain ops - using KCSAN's compound instrumentation.
Use them for atomic RNW and bitops, where appropriate.
Doing this might find new races.
(Depends on the compiler having tsan-compound-read-before-write=1 support.)
- Support atomic built-ins, which will help certain architectures, such as s390.
- Misc enhancements and smaller fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently BUILD_BUG() macro is expanded to smth like the following:
do {
extern void __compiletime_assert_0(void)
__attribute__((error("BUILD_BUG failed")));
if (!(!(1)))
__compiletime_assert_0();
} while (0);
If used in a function body this obviously would produce build errors
with -Wnested-externs and -Werror.
Build objtool with -Wno-nested-externs to enable BUILD_BUG() usage.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The motivations to go rework memcpy_mcsafe() are that the benefit of
doing slow and careful copies is obviated on newer CPUs, and that the
current opt-in list of CPUs to instrument recovery is broken relative to
those CPUs. There is no need to keep an opt-in list up to date on an
ongoing basis if pmem/dax operations are instrumented for recovery by
default. With recovery enabled by default the old "mcsafe_key" opt-in to
careful copying can be made a "fragile" opt-out. Where the "fragile"
list takes steps to not consume poison across cachelines.
The discussion with Linus made clear that the current "_mcsafe" suffix
was imprecise to a fault. The operations that are needed by pmem/dax are
to copy from a source address that might throw #MC to a destination that
may write-fault, if it is a user page.
So copy_to_user_mcsafe() becomes copy_mc_to_user() to indicate
the separate precautions taken on source and destination.
copy_mc_to_kernel() is introduced as a non-SMAP version that does not
expect write-faults on the destination, but is still prepared to abort
with an error code upon taking #MC.
The original copy_mc_fragile() implementation had negative performance
implications since it did not use the fast-string instruction sequence
to perform copies. For this reason copy_mc_to_kernel() fell back to
plain memcpy() to preserve performance on platforms that did not indicate
the capability to recover from machine check exceptions. However, that
capability detection was not architectural and now that some platforms
can recover from fast-string consumption of memory errors the memcpy()
fallback now causes these more capable platforms to fail.
Introduce copy_mc_enhanced_fast_string() as the fast default
implementation of copy_mc_to_kernel() and finalize the transition of
copy_mc_fragile() to be a platform quirk to indicate 'copy-carefully'.
With this in place, copy_mc_to_kernel() is fast and recovery-ready by
default regardless of hardware capability.
Thanks to Vivek for identifying that copy_user_generic() is not suitable
as the copy_mc_to_user() backend since the #MC handler explicitly checks
ex_has_fault_handler(). Thanks to the 0day robot for catching a
performance bug in the x86/copy_mc_to_user implementation.
[ bp: Add the "why" for this change from the 0/2th message, massage. ]
Fixes: 92b0729c34 ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Reported-by: Erwin Tsaur <erwin.tsaur@intel.com>
Reported-by: 0day robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Erwin Tsaur <erwin.tsaur@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/160195562556.2163339.18063423034951948973.stgit@dwillia2-desk3.amr.corp.intel.com
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
With CONFIG_UBSAN_TRAP enabled, the compiler may insert a trap
instruction after a call to a noreturn function. In this case, objtool
warns that the UD2 instruction is unreachable.
This is a behavior seen with Clang, from the oldest version capable of
building the mainline x64_64 kernel (9.0), to the latest experimental
version (12.0).
Objtool silences similar warnings (trap after dead end instructions), so
so expand that check to include dead end functions.
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Rong Chen <rong.a.chen@intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Philip Li <philip.li@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: kasan-dev@googlegroups.com
Cc: x86@kernel.org
Cc: clang-built-linux@googlegroups.com
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1148
Link: https://lore.kernel.org/lkml/CAKwvOdmptEpi8fiOyWUo=AiZJiX+Z+VHJOM2buLPrWsMTwLnyw@mail.gmail.com
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Relocation for a call destination could point to a symbol that has
type STT_NOTYPE.
Lookup such a symbol when no function is available.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
When a function is annotated with STACK_FRAME_NON_STANDARD, objtool
doesn't validate its code paths. It also skips sibling call detection
within the function.
But sibling call detection is actually needed for the case where the
ignored function doesn't have any return instructions. Otherwise
objtool naively marks the function as implicit static noreturn, which
affects the reachability of its callers, resulting in "unreachable
instruction" warnings.
Fix it by just enabling sibling call detection for ignored functions.
The 'insn->ignore' check in add_jump_destinations() is no longer needed
after
e6da956795 ("objtool: Don't use ignore flag for fake jumps").
Fixes the following warning:
arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction
which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.1599751464.git.jpoimboe@redhat.com
It is possible for alternative code to unconditionally jump out of the
alternative region. In such a case, if a fake jump is added at the end
of the alternative instructions, the fake jump will never be reached.
Since the fake jump is just a mean to make sure code validation does not
go beyond the set of alternatives, reaching it is not a requirement.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
save_reg already checks that the register being saved does not already
have a saved state.
Remove redundant checks before processing a register storing operation.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The set of registers that can be included in an unwind hint and their
encoding will depend on the architecture. Have arch specific code to
decode that register.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Unwind hints are useful to provide objtool with information about stack
states in non-standard functions/code.
While the type of information being provided might be very arch
specific, the mechanism to provide the information can be useful for
other architectures.
Move the relevant unwint hint definitions for all architectures to
see.
[ jpoimboe: REGS_IRET -> REGS_PARTIAL ]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The way to identify jump tables and retrieve all the data necessary to
handle the different execution branches is not the same on all
architectures. In order to be able to add other architecture support,
define an arch-dependent function to process jump-tables.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Raphael Gault <raphael.gault@arm.com>
[J.T.: Move arm64 bits out of this patch,
Have only one function to find the start of the jump table,
for now assume that the jump table format will be the same as
x86]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
As pointed out by the comment in handle_group_alt(), support of
relocation for instructions in an alternative group depends on whether
arch specific kernel code handles it.
So, let objtool arch specific code decide whether a relocation for
the alternative section should be accepted.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Some alternatives associated with a specific feature need to be treated
in a special way. Since the features and how to treat them vary from one
architecture to another, move the special case handling to arch specific
code.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Some macros are defined to describe the size and layout of structures
exception_table_entry, jump_entry and alt_instr. These values can vary
from one architecture to another.
Have the values be defined by arch specific code.
Suggested-by: Raphael Gault <raphael.gault@arm.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Do not take into account outdated headers unrelated to the build of the
current architecture.
[ jpoimboe: use $SRCARCH directly ]
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
In order to support multiple architectures and potentially different
sets of headers to compare against their kernel equivalent, it is
simpler to have all headers to check in a single list.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Implementation of ORC requires some definitions that are currently
provided by the target architecture headers. Do not depend on these
definitions when the orc subcommand is not implemented.
This avoid requiring arches with no orc implementation to provide dummy
orc definitions.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Orc generation is only done for text sections, but some instructions
can be found in non-text sections (e.g. .discard.text sections).
Skip setting their orc sections since their whole sections will be
skipped for orc generation.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Now that the objtool_file can be obtained outside of the check function,
orc generation builtin no longer requires check to explicitly call its
orc related functions.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Structure objtool_file can be used by different subcommands. In fact
it already is, by check and orc.
Provide a function that allows to initialize objtool_file, that builtin
can call, without relying on check to do the correct setup for them and
explicitly hand the objtool_file to them.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
GCC can turn our static_call(name)(args...) into a tail call, in which
case we get a JMP.d32 into the trampoline (which then does a further
tail-call).
Teach objtool to recognise and mark these in .static_call_sites and
adjust the code patching to deal with this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20200818135805.101186767@infradead.org
Add the inline static call implementation for x86-64. The generated code
is identical to the out-of-line case, except we move the trampoline into
it's own section.
Objtool uses the trampoline naming convention to detect all the call
sites. It then annotates those call sites in the .static_call_sites
section.
During boot (and module init), the call sites are patched to call
directly into the destination function. The temporary trampoline is
then no longer used.
[peterz: merged trampolines, put trampoline in section]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20200818135804.864271425@infradead.org
Adds the new __tsan_read_write compound instrumentation to objtool's
uaccess whitelist.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Adds the new TSAN functions that may be emitted for atomic builtins to
objtool's uaccess whitelist.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
- Add support for non-rela relocations, in preparation to merge 'recordmcount'
functionality into objtool.
- Fix assumption that broke under --ffunction-sections (LTO) builds.
- Misc cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/CbB
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Add support for non-rela relocations, in preparation to merge
'recordmcount' functionality into objtool
- Fix assumption that broke under --ffunction-sections (LTO) builds
- Misc cleanups
* tag 'objtool-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add support for relocations without addends
objtool: Rename rela to reloc
objtool: Use sh_info to find the base for .rela sections
objtool: Do not assume order of parent/child functions
Address KCOV vs noinstr. There is no function attribute to selectively
suppress KCOV instrumentation, instead teach objtool to NOP out the
calls in noinstr functions.
This cures a bunch of KCOV crashes (as used by syzcaller).
-----BEGIN PGP SIGNATURE-----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=0Wd6
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
"Three fixes from Peter Zijlstra suppressing KCOV instrumentation in
noinstr sections.
Peter Zijlstra says:
"Address KCOV vs noinstr. There is no function attribute to
selectively suppress KCOV instrumentation, instead teach objtool
to NOP out the calls in noinstr functions"
This cures a bunch of KCOV crashes (as used by syzcaller)"
* tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix noinstr vs KCOV
objtool: Provide elf_write_{insn,reloc}()
objtool: Clean up elf_write() condition
Since many compilers cannot disable KCOV with a function attribute,
help it to NOP out any __sanitizer_cov_*() calls injected in noinstr
code.
This turns:
12: e8 00 00 00 00 callq 17 <lockdep_hardirqs_on+0x17>
13: R_X86_64_PLT32 __sanitizer_cov_trace_pc-0x4
into:
12: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
13: R_X86_64_NONE __sanitizer_cov_trace_pc-0x4
Just like recordmcount does.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
This provides infrastructure to rewrite instructions; this is
immediately useful for helping out with KCOV-vs-noinstr, but will
also come in handy for a bunch of variable sized jump-label patches
that are still on ice.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
With there being multiple ways to change the ELF data, let's more
concisely track modification.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The UBSAN instrumentation only inserts external CALLs when things go
'BAD', much like WARN(). So treat them similar to WARN()s for noinstr,
that is: allow them, at the risk of taking the machine down, to get
their message out.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently objtool only collects information about relocations with
addends. In recordmcount, which we are about to merge into objtool,
some supported architectures do not use rela relocations.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Reviewed-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Before supporting additional relocation types rename the relevant
types and functions from "rela" to "reloc". This work be done with
the following regex:
sed -e 's/struct rela/struct reloc/g' \
-e 's/\([_\*]\)rela\(s\{0,1\}\)/\1reloc\2/g' \
-e 's/tmprela\(s\{0,1\}\)/tmpreloc\1/g' \
-e 's/relasec/relocsec/g' \
-e 's/rela_list/reloc_list/g' \
-e 's/rela_hash/reloc_hash/g' \
-e 's/add_rela/add_reloc/g' \
-e 's/rela->/reloc->/g' \
-e '/rela[,\.]/{ s/\([^\.>]\)rela\([\.,]\)/\1reloc\2/g ; }' \
-e 's/rela =/reloc =/g' \
-e 's/relas =/relocs =/g' \
-e 's/relas\[/relocs[/g' \
-e 's/relaname =/relocname =/g' \
-e 's/= rela\;/= reloc\;/g' \
-e 's/= relas\;/= relocs\;/g' \
-e 's/= relaname\;/= relocname\;/g' \
-e 's/, rela)/, reloc)/g' \
-e 's/\([ @]\)rela\([ "]\)/\1reloc\2/g' \
-e 's/ rela$/ reloc/g' \
-e 's/, relaname/, relocname/g' \
-e 's/sec->rela/sec->reloc/g' \
-e 's/(\(!\{0,1\}\)rela/(\1reloc/g' \
-i \
arch.h \
arch/x86/decode.c \
check.c \
check.h \
elf.c \
elf.h \
orc_gen.c \
special.c
Notable exceptions which complicate the regex include gelf_*
library calls and standard/expected section names which still use
"rela" because they encode the type of relocation expected. Also, keep
"rela" in the struct because it encodes a specific type of relocation
we currently expect.
It will eventually turn into a member of an anonymous union when a
susequent patch adds implicit addend, or "rel", relocation support.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
ELF doesn't require .rela section names to match the base section. Use
the section index in sh_info to find the section instead of looking it
up by name.
LLD, for example, generates a .rela section that doesn't match the base
section name when we merge sections in a linker script for a binary
compiled with -ffunction-sections.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
If a .cold function is examined prior to it's parent, the link
to the parent/child function can be overwritten when the parent
is examined. Only update pfunc and cfunc if they were previously
nil to prevent this from happening.
This fixes an issue seen when compiling with -ffunction-sections.
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Objtool currently only compiles for x86 architectures. This is
fine as it presently does not support tooling for other
architectures. However, we would like to be able to convert other
kernel tools to run as objtool sub commands because they too
process ELF object files. This will allow us to convert tools
such as recordmcount to use objtool's ELF code.
Since much of recordmcount's ELF code is copy-paste code to/from
a variety of other kernel tools (look at modpost for example) this
means that if we can convert recordmcount we can convert more.
We define weak definitions for subcommand entry functions and other weak
definitions for shared functions critical to building existing
subcommands. These return 127 when the command is missing which signify
tools that do not exist on all architectures. In this case the "check"
and "orc" tools do not exist on all architectures so we only add them
for x86. Future changes adding support for "check", to arm64 for
example, can then modify the SUBCMD_CHECK variable when building for
arm64.
Objtool is not currently wired in to KConfig to be built for other
architectures because it's not needed for those architectures and
there are no commands it supports other than those for x86. As more
command support is enabled on various architectures the necessary
KConfig changes can be made (e.g. adding "STACK_VALIDATION") to
trigger building objtool.
[ jpoimboe: remove aliases, add __weak macro, add error messages ]
Cc: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The objtool_file structure describes the files objtool works on,
is used by the check subcommand, and the check.h header is included
by the orc subcommands so it's presently used by all subcommands.
Since the structure will be useful in all subcommands besides check,
and some subcommands may not want to include check.h to get the
definition, split the structure out into a new header meant for use
by all objtool subcommands.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Reviewed-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
When the user requests help it's not an error so do not exit with
a non-zero exit code. This is not especially useful for a user but
any script that might wish to check that objtool --help is at least
available can't rely on the exit code to crudely check that, for
example, building an objtool executable succeeds.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Ingo Molnar
Peter Zijlstra
Borislav Petkov
Linus Torvalds
Andrey Konovalov
Sami Tolvanen
Josh Poimboeuf
Vasily Gorbik
Martin Schwidefsky
Julien Thierry
Jean-Philippe Brucker
Dan Williams
Jann Horn
Ilie Halip
Raphael Gault
Marco Elver
Thomas Gleixner
Matt Helsley
Kristen Carlson Accardi