The hypervisor may request the perf subsystem to schedule a time window
to directly access the LBR records msrs for its own use. Normally, it would
create a guest LBR event with callstack mode enabled, which is scheduled
along with other ordinary LBR events on the host but in an exclusive way.
To avoid wasting a counter for the guest LBR event, the perf tracks its
hw->idx via INTEL_PMC_IDX_FIXED_VLBR and assigns it with a fake VLBR
counter with the help of new vlbr_constraint. As with the BTS event,
there is actually no hardware counter assigned for the guest LBR event.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200514083054.62538-5-like.xu@linux.intel.com
The LBR records msrs are model specific. The perf subsystem has already
obtained the base addresses of LBR records based on the cpu model.
Therefore, an interface is added to allow callers outside the perf
subsystem to obtain these LBR information. It's useful for hypervisors
to emulate the LBR feature for guests with less code.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200613080958.132489-4-like.xu@linux.intel.com
For intel_pmu_en/disable_event(), reorder the branches checks for hw->idx
and make them sorted by probability: gp,fixed,bts,others.
Clean up the x86_assign_hw_event() by converting multiple if-else
statements to a switch statement.
To skip x86_perf_event_update() and x86_perf_event_set_period(),
it's generic to replace "idx == INTEL_PMC_IDX_FIXED_BTS" check with
'!hwc->event_base' because that should be 0 for all non-gp/fixed cases.
Wrap related bit operations into intel_set/clear_masks() and make the main
path more cleaner and readable.
No functional changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Original-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200613080958.132489-3-like.xu@linux.intel.com
The MSR variable type can be 'unsigned int', which uses less memory than
the longer 'unsigned long'. Fix 'struct x86_pmu' for that. The lbr_nr won't
be a negative number, so make it 'unsigned int' as well.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200613080958.132489-2-like.xu@linux.intel.com
The OMAP developers are particularly active at hunting down regressions,
so this is a separate branch with OMAP specific fixes for the v5.8:
As Tony explains
"The recent display subsystem (DSS) related platform data changes
caused display related regressions for suspend and resume. Looks like
I only tested suspend and resume before dropping the legacy platform
data, and forgot to test it after dropping it. Turns out the main issue
was that we no longer have platform code calling pm_runtime_suspend
for DSS like we did for the legacy platform data case, and that fix
is still being discussed on the dri-devel list and will get merged
separately. The DSS related testing exposed a pile other other display
related issues that also need fixing though":
- Fix ti-sysc optional clock handling and reset status checks
for devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested
to avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Other OMAP changes from Tony include:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
- Prevent pocketgeagle header line signal from accidentally setting
micro-SD write protection signal by removing the default mux
- Fix NFSroot flakeyness after resume for duover by switching the
smsc911x gpio interrupt to back to level sensitive
- Fix regression for omap4 clockevent source after recent system
timer changes
- Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid"
phy-mode
- One patch to convert am3/am4 DT files to use the regular sdhci-omap
driver instead of the old hsmmc driver, this was meant for the
merge window but got lost in the process.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=FFTv
-----END PGP SIGNATURE-----
Merge tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM OMAP fixes from Arnd Bergmann:
"The OMAP developers are particularly active at hunting down
regressions, so this is a separate branch with OMAP specific
fixes for v5.8:
As Tony explains
"The recent display subsystem (DSS) related platform data changes
caused display related regressions for suspend and resume. Looks
like I only tested suspend and resume before dropping the legacy
platform data, and forgot to test it after dropping it. Turns out
the main issue was that we no longer have platform code calling
pm_runtime_suspend for DSS like we did for the legacy platform data
case, and that fix is still being discussed on the dri-devel list
and will get merged separately. The DSS related testing exposed a
pile other other display related issues that also need fixing
though":
- Fix ti-sysc optional clock handling and reset status checks for
devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested to
avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Other OMAP changes from Tony include:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
- Prevent pocketgeagle header line signal from accidentally setting
micro-SD write protection signal by removing the default mux
- Fix NFSroot flakeyness after resume for duover by switching the
smsc911x gpio interrupt to back to level sensitive
- Fix regression for omap4 clockevent source after recent system
timer changes
- Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid"
phy-mode
- One patch to convert am3/am4 DT files to use the regular sdhci-omap
driver instead of the old hsmmc driver, this was meant for the
merge window but got lost in the process"
* tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode
ARM: dts: Fix omap4 system timer source clocks
ARM: dts: Fix duovero smsc interrupt for suspend
ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect
Revert "bus: ti-sysc: Increase max softreset wait"
ARM: dts: am437x-epos-evm: remove lcd timings
ARM: dts: am437x-gp-evm: remove lcd timings
ARM: dts: am437x-sk-evm: remove lcd timings
ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes
ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks
ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag
ARM: dts: Fix am33xx.dtsi USB ranges length
bus: ti-sysc: Increase max softreset wait
ARM: OMAP2+: Fix legacy mode dss_reset
bus: ti-sysc: Fix uninitialized framedonetv_irq
bus: ti-sysc: Ignore clockactivity unless specified as a quirk
bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit
ARM: dts: omap4-droid4: Fix spi configuration and increase rate
bus: ti-sysc: Flush posted write on enable and disable
soc: ti: omap-prm: use atomic iopoll instead of sleeping one
...
Here are a couple of bug fixes, mostly for devicetree files
NXP i.MX:
- Use correct voltage on some i.MX8M board device trees to
avoid hardware damage
- Code fixes for a compiler warning and incorrect reference
counting, both harmless.
- Fix the i.MX8M SoC driver to correctly identify imx8mp
- Fix watchdog configuration in imx6ul-kontron device tree.
Broadcom:
- A small regression fix for the Raspberry-Pi firmware driver
- A Kconfig change to use the correct timer driver on Northstar
- A DT fix for the Luxul XWC-2000 machine
- Two more DT fixes for NSP SoCs
STmicroelectronics STI
- Revert one broken patch for L2 cache configuration
ARM Versatile Express:
- Fix a regression by reverting a broken DT cleanup
TEE drivers:
- MAINTAINERS: change tee mailing list
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=P5b/
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a couple of bug fixes, mostly for devicetree files
NXP i.MX:
- Use correct voltage on some i.MX8M board device trees to avoid
hardware damage
- Code fixes for a compiler warning and incorrect reference counting,
both harmless.
- Fix the i.MX8M SoC driver to correctly identify imx8mp
- Fix watchdog configuration in imx6ul-kontron device tree.
Broadcom:
- A small regression fix for the Raspberry-Pi firmware driver
- A Kconfig change to use the correct timer driver on Northstar
- A DT fix for the Luxul XWC-2000 machine
- Two more DT fixes for NSP SoCs
STmicroelectronics STI
- Revert one broken patch for L2 cache configuration
ARM Versatile Express:
- Fix a regression by reverting a broken DT cleanup
TEE drivers:
- MAINTAINERS: change tee mailing list"
* tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
Revert "ARM: sti: Implement dummy L2 cache's write_sec"
soc: imx8m: fix build warning
ARM: imx6: add missing put_device() call in imx6q_suspend_init()
ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
soc: imx8m: Correct i.MX8MP UID fuse offset
ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
ARM: dts: NSP: Correct FA2 mailbox node
ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
MAINTAINERS: change tee mailing list
ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP
ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000
arm: dts: vexpress: Move mcc node back into motherboard node
- Robustness fix for TPM log parsing code
- kobject refcount fix for the ESRT parsing code
- Two efivarfs fixes to make it behave more like an ordinary file system
- Style fixup for zero length arrays
- Fix a regression in path separator handling in the initrd loader
- Fix a missing prototype warning
- Add some kerneldoc headers for newly introduced stub routines
- Allow support for SSDT overrides via EFI variables to be disabled
- Report CPU mode and MMU state upon entry for 32-bit ARM
- Use the correct stack pointer alignment when entering from mixed mode
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=F0bv
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
- Fix build regression on v4.8 and older
- Robustness fix for TPM log parsing code
- kobject refcount fix for the ESRT parsing code
- Two efivarfs fixes to make it behave more like an ordinary file
system
- Style fixup for zero length arrays
- Fix a regression in path separator handling in the initrd loader
- Fix a missing prototype warning
- Add some kerneldoc headers for newly introduced stub routines
- Allow support for SSDT overrides via EFI variables to be disabled
- Report CPU mode and MMU state upon entry for 32-bit ARM
- Use the correct stack pointer alignment when entering from mixed mode
* tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm: Print CPU boot mode and MMU state at boot
efi/libstub: arm: Omit arch specific config table matching array on arm64
efi/x86: Setup stack correctly for efi_pe_entry
efi: Make it possible to disable efivar_ssdt entirely
efi/libstub: Descriptions for stub helper functions
efi/libstub: Fix path separator regression
efi/libstub: Fix missing-prototype warning for skip_spaces()
efi: Replace zero-length array and use struct_size() helper
efivarfs: Don't return -EINTR when rate-limiting reads
efivarfs: Update inode modification time for successful writes
efi/esrt: Fix reference count leak in esre_create_sysfs_entry.
efi/tpm: Verify event log header before parsing
efi/x86: Fix build with gcc 4
The most anticipated fix in this pull request is probably the horrible build
fix for the RANDSTRUCT fail that didn't make -rc2. Also included is the cleanup
that removes those BUILD_BUG_ON()s and replaces it with ugly unions.
Also included is the try_to_wake_up() race fix that was first triggered by
Paul's RCU-torture runs, but was independently hit by Dave Chinner's fstest
runs as well.
-----BEGIN PGP SIGNATURE-----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=EGOe
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
"The most anticipated fix in this pull request is probably the horrible
build fix for the RANDSTRUCT fail that didn't make -rc2. Also included
is the cleanup that removes those BUILD_BUG_ON()s and replaces it with
ugly unions.
Also included is the try_to_wake_up() race fix that was first
triggered by Paul's RCU-torture runs, but was independently hit by
Dave Chinner's fstest runs as well"
* tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cfs: change initial value of runnable_avg
smp, irq_work: Continue smp_call_function*() and irq_work*() integration
sched/core: s/WF_ON_RQ/WQ_ON_CPU/
sched/core: Fix ttwu() race
sched/core: Fix PI boosting between RT and DEADLINE tasks
sched/deadline: Initialize ->dl_boosted
sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption
sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build fail
* Use the proper length type in the 32-bit truncate() syscall variant,
by Jiri Slaby.
* Reinit IA32_FEAT_CTL during wakeup to fix the case where after
resume, VMXON would #GP due to VMX not being properly enabled, by Sean
Christopherson.
* Fix a static checker warning in the resctrl code, by Dan Carpenter.
* Add a CR4 pinning mask for bits which cannot change after boot, by
Kees Cook.
* Align the start of the loop of __clear_user() to 16 bytes, to improve
performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming.
-----BEGIN PGP SIGNATURE-----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=hxkd
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- AMD Memory bandwidth counter width fix, by Babu Moger.
- Use the proper length type in the 32-bit truncate() syscall variant,
by Jiri Slaby.
- Reinit IA32_FEAT_CTL during wakeup to fix the case where after
resume, VMXON would #GP due to VMX not being properly enabled, by
Sean Christopherson.
- Fix a static checker warning in the resctrl code, by Dan Carpenter.
- Add a CR4 pinning mask for bits which cannot change after boot, by
Kees Cook.
- Align the start of the loop of __clear_user() to 16 bytes, to improve
performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming.
* tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/64: Align start of __clear_user() loop to 16-bytes
x86/cpu: Use pinning mask for CR4 bits needing to be 0
x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get()
x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup
syscalls: Fix offset type of ksys_ftruncate()
x86/resctrl: Fix memory bandwidth counter width for AMD
A single commit that uses "arch_" atomic operations to avoid the
instrumentation that comes with the non-"arch_" versions. In preparation
for that commit, it also has another commit that makes these "arch_"
atomic operations available to generic code.
Without these commits, KCSAN uses can see pointless errors.
Both from Peter Zijlstra.
-----BEGIN PGP SIGNATURE-----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=amVp
-----END PGP SIGNATURE-----
Merge tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU-vs-KCSAN fixes from Borislav Petkov:
"A single commit that uses "arch_" atomic operations to avoid the
instrumentation that comes with the non-"arch_" versions.
In preparation for that commit, it also has another commit that makes
these "arch_" atomic operations available to generic code.
Without these commits, KCSAN uses can see pointless errors"
* tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Fixup noinstr warnings
locking/atomics: Provide the arch_atomic_ interface to generic code
Address KCOV vs noinstr. There is no function attribute to selectively
suppress KCOV instrumentation, instead teach objtool to NOP out the
calls in noinstr functions.
This cures a bunch of KCOV crashes (as used by syzcaller).
-----BEGIN PGP SIGNATURE-----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=0Wd6
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
"Three fixes from Peter Zijlstra suppressing KCOV instrumentation in
noinstr sections.
Peter Zijlstra says:
"Address KCOV vs noinstr. There is no function attribute to
selectively suppress KCOV instrumentation, instead teach objtool
to NOP out the calls in noinstr functions"
This cures a bunch of KCOV crashes (as used by syzcaller)"
* tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix noinstr vs KCOV
objtool: Provide elf_write_{insn,reloc}()
objtool: Clean up elf_write() condition
These patches address a number of instrumentation issues that were found after
the x86/entry overhaul. When combined with rcu/urgent and objtool/urgent, these
patches make UBSAN/KASAN/KCSAN happy again.
Part of making this all work is bumping the minimum GCC version for KASAN
builds to gcc-8.3, the reason for this is that the __no_sanitize_address
function attribute is broken in GCC releases before that.
No known GCC version has a working __no_sanitize_undefined, however because the
only noinstr violation that results from this happens when an UB is found, we
treat it like WARN. That is, we allow it to violate the noinstr rules in order
to get the warning out.
-----BEGIN PGP SIGNATURE-----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=fcu1
-----END PGP SIGNATURE-----
Merge tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry fixes from Borislav Petkov:
"This is the x86/entry urgent pile which has accumulated since the
merge window.
It is not the smallest but considering the almost complete entry core
rewrite, the amount of fixes to follow is somewhat higher than usual,
which is to be expected.
Peter Zijlstra says:
'These patches address a number of instrumentation issues that were
found after the x86/entry overhaul. When combined with rcu/urgent
and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy
again.
Part of making this all work is bumping the minimum GCC version for
KASAN builds to gcc-8.3, the reason for this is that the
__no_sanitize_address function attribute is broken in GCC releases
before that.
No known GCC version has a working __no_sanitize_undefined, however
because the only noinstr violation that results from this happens
when an UB is found, we treat it like WARN. That is, we allow it to
violate the noinstr rules in order to get the warning out'"
* tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix #UD vs WARN more
x86/entry: Increase entry_stack size to a full page
x86/entry: Fixup bad_iret vs noinstr
objtool: Don't consider vmlinux a C-file
kasan: Fix required compiler version
compiler_attributes.h: Support no_sanitize_undefined check with GCC 4
x86/entry, bug: Comment the instrumentation_begin() usage for WARN()
x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*()
x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline()
compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr
kasan: Bump required compiler version
x86, kcsan: Add __no_kcsan to noinstr
kcsan: Remove __no_kcsan_or_inline
x86, kcsan: Remove __no_kcsan_or_inline usage
Some performance regression on reaim benchmark have been raised with
commit 070f5e860e ("sched/fair: Take into account runnable_avg to classify group")
The problem comes from the init value of runnable_avg which is initialized
with max value. This can be a problem if the newly forked task is finally
a short task because the group of CPUs is wrongly set to overloaded and
tasks are pulled less agressively.
Set initial value of runnable_avg equals to util_avg to reflect that there
is no waiting time so far.
Fixes: 070f5e860e ("sched/fair: Take into account runnable_avg to classify group")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200624154422.29166-1-vincent.guittot@linaro.org
Instead of relying on BUG_ON() to ensure the various data structures
line up, use a bunch of horrible unions to make it all automatic.
Much of the union magic is to ensure irq_work and smp_call_function do
not (yet) see the members of their respective data structures change
name.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20200622100825.844455025@infradead.org
Use a better name for this poorly named flag, to avoid confusion...
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20200622100825.785115830@infradead.org
Paul reported rcutorture occasionally hitting a NULL deref:
sched_ttwu_pending()
ttwu_do_wakeup()
check_preempt_curr() := check_preempt_wakeup()
find_matching_se()
is_same_group()
if (se->cfs_rq == pse->cfs_rq) <-- *BOOM*
Debugging showed that this only appears to happen when we take the new
code-path from commit:
2ebb177175 ("sched/core: Offload wakee task activation if it the wakee is descheduling")
and only when @cpu == smp_processor_id(). Something which should not
be possible, because p->on_cpu can only be true for remote tasks.
Similarly, without the new code-path from commit:
c6e7bd7afa ("sched/core: Optimize ttwu() spinning on p->on_cpu")
this would've unconditionally hit:
smp_cond_load_acquire(&p->on_cpu, !VAL);
and if: 'cpu == smp_processor_id() && p->on_cpu' is possible, this
would result in an instant live-lock (with IRQs disabled), something
that hasn't been reported.
The NULL deref can be explained however if the task_cpu(p) load at the
beginning of try_to_wake_up() returns an old value, and this old value
happens to be smp_processor_id(). Further assume that the p->on_cpu
load accurately returns 1, it really is still running, just not here.
Then, when we enqueue the task locally, we can crash in exactly the
observed manner because p->se.cfs_rq != rq->cfs_rq, because p's cfs_rq
is from the wrong CPU, therefore we'll iterate into the non-existant
parents and NULL deref.
The closest semi-plausible scenario I've managed to contrive is
somewhat elaborate (then again, actual reproduction takes many CPU
hours of rcutorture, so it can't be anything obvious):
X->cpu = 1
rq(1)->curr = X
CPU0 CPU1 CPU2
// switch away from X
LOCK rq(1)->lock
smp_mb__after_spinlock
dequeue_task(X)
X->on_rq = 9
switch_to(Z)
X->on_cpu = 0
UNLOCK rq(1)->lock
// migrate X to cpu 0
LOCK rq(1)->lock
dequeue_task(X)
set_task_cpu(X, 0)
X->cpu = 0
UNLOCK rq(1)->lock
LOCK rq(0)->lock
enqueue_task(X)
X->on_rq = 1
UNLOCK rq(0)->lock
// switch to X
LOCK rq(0)->lock
smp_mb__after_spinlock
switch_to(X)
X->on_cpu = 1
UNLOCK rq(0)->lock
// X goes sleep
X->state = TASK_UNINTERRUPTIBLE
smp_mb(); // wake X
ttwu()
LOCK X->pi_lock
smp_mb__after_spinlock
if (p->state)
cpu = X->cpu; // =? 1
smp_rmb()
// X calls schedule()
LOCK rq(0)->lock
smp_mb__after_spinlock
dequeue_task(X)
X->on_rq = 0
if (p->on_rq)
smp_rmb();
if (p->on_cpu && ttwu_queue_wakelist(..)) [*]
smp_cond_load_acquire(&p->on_cpu, !VAL)
cpu = select_task_rq(X, X->wake_cpu, ...)
if (X->cpu != cpu)
switch_to(Y)
X->on_cpu = 0
UNLOCK rq(0)->lock
However I'm having trouble convincing myself that's actually possible
on x86_64 -- after all, every LOCK implies an smp_mb() there, so if ttwu
observes ->state != RUNNING, it must also observe ->cpu != 1.
(Most of the previous ttwu() races were found on very large PowerPC)
Nevertheless, this fully explains the observed failure case.
Fix it by ordering the task_cpu(p) load after the p->on_cpu load,
which is easy since nothing actually uses @cpu before this.
Fixes: c6e7bd7afa ("sched/core: Optimize ttwu() spinning on p->on_cpu")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200622125649.GC576871@hirez.programming.kicks-ass.net
syzbot reported the following warning:
WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628
enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504
At deadline.c:628 we have:
623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se)
624 {
625 struct dl_rq *dl_rq = dl_rq_of_se(dl_se);
626 struct rq *rq = rq_of_dl_rq(dl_rq);
627
628 WARN_ON(dl_se->dl_boosted);
629 WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline));
[...]
}
Which means that setup_new_dl_entity() has been called on a task
currently boosted. This shouldn't happen though, as setup_new_dl_entity()
is only called when the 'dynamic' deadline of the new entity
is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this
condition.
Digging through the PI code I noticed that what above might in fact happen
if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the
first branch of boosting conditions we check only if a pi_task 'dynamic'
deadline is earlier than mutex holder's and in this case we set mutex
holder to be dl_boosted. However, since RT 'dynamic' deadlines are only
initialized if such tasks get boosted at some point (or if they become
DEADLINE of course), in general RT 'dynamic' deadlines are usually equal
to 0 and this verifies the aforementioned condition.
Fix it by checking that the potential donor task is actually (even if
temporary because in turn boosted) running at DEADLINE priority before
using its 'dynamic' deadline value.
Fixes: 2d3d891d33 ("sched/deadline: Add SCHED_DEADLINE inheritance logic")
Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomain
syzbot reported the following warning triggered via SYSC_sched_setattr():
WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 setup_new_dl_entity /kernel/sched/deadline.c:594 [inline]
WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_dl_entity /kernel/sched/deadline.c:1370 [inline]
WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_task_dl+0x1c17/0x2ba0 /kernel/sched/deadline.c:1441
This happens because the ->dl_boosted flag is currently not initialized by
__dl_clear_params() (unlike the other flags) and setup_new_dl_entity()
rightfully complains about it.
Initialize dl_boosted to 0.
Fixes: 2d3d891d33 ("sched/deadline: Add SCHED_DEADLINE inheritance logic")
Reported-by: syzbot+5ac8bac25f95e8b221e7@syzkaller.appspotmail.com
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Daniel Wagner <dwagner@suse.de>
Link: https://lkml.kernel.org/r/20200617072919.818409-1-juri.lelli@redhat.com
This function is concerned with the long-term CPU mask, not the
transitory mask the task might have while migrate disabled. Before
this patch, if a task was migrate-disabled at the time
__set_cpus_allowed_ptr() was called, and the new mask happened to be
equal to the CPU that the task was running on, then the mask update
would be lost.
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200617121742.cpxppyi7twxmpin7@linutronix.de
- Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device
trees.
- Fix i.MX8MP UID fuse offset in i.MX8M SoC driver.
- Fix watchdog configuration in imx6ul-kontron device tree.
- Fix one build warning seen on building soc-imx8m driver with
x86_64-randconfig.
- Add missing put_device() call for a couple of mach-imx PM functions.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7zM08UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5HNAf+Kw6EPNxYom/MJ4P92gxLAtPA6AO4
+WuLYmSphhgmGAQLFU4UiTH/2sYXmT7fSDwLhfZI5XJp6j8J89Hxe2kyMomvIT92
Xbbzp7fr+2FPGgyI6ImiKTFeSZiT0LPq5fs1uF2lTP6+/SklF9yy5ynUvNULrD4b
iSAXOZkMz6Ft8dn1zYrTKPIYfsTe1zXsDgw8a9sc+0LfgiR5cBTq359jHrN5Q0Tq
NYoOHT+8V5C8BVmzp5I1zoghZEayPT2Ui1JIwBiyVij8KqZvYY3wckjPqgdfQ1vK
IzGksPWRojKAw2RKA59kpUR/pgoZH3GYnfjmCAIOkMnMSgAqz1inZZq2oA==
=iERQ
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.8:
- Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device
trees.
- Fix i.MX8MP UID fuse offset in i.MX8M SoC driver.
- Fix watchdog configuration in imx6ul-kontron device tree.
- Fix one build warning seen on building soc-imx8m driver with
x86_64-randconfig.
- Add missing put_device() call for a couple of mach-imx PM functions.
* tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: fix build warning
ARM: imx6: add missing put_device() call in imx6q_suspend_init()
ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
soc: imx8m: Correct i.MX8MP UID fuse offset
ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
Link: https://lore.kernel.org/r/20200624111725.GA24312@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.8, please pull the following:
- Andy provides a fix for the Raspberry Pi firmware driver to print the
correct time upon boot. This is a fallout from a converstion to use
the ptT format
-----BEGIN PGP SIGNATURE-----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=mIdj
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers fixes
for 5.8, please pull the following:
- Andy provides a fix for the Raspberry Pi firmware driver to print the
correct time upon boot. This is a fallout from a converstion to use
the ptT format
* tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux:
ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
Link: https://lore.kernel.org/r/20200619202250.19029-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.8, please pull the following:
- Matthew adds a missing select to permit the use of the standard ARM
SP804 timers on Norsthstar Plus (NSP)
-----BEGIN PGP SIGNATURE-----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=dF5I
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs machine/Kconfig fixes
for 5.8, please pull the following:
- Matthew adds a missing select to permit the use of the standard ARM
SP804 timers on Norsthstar Plus (NSP)
* tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux:
ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP
Link: https://lore.kernel.org/r/20200619202250.19029-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
5.8, please pull the following:
- Rafal adds a missing 'device_type' property to the Luxul XWC-2000
required for the memory nodes to be correctly parsed by Linux
- Matthew provides two fixes for the NSP SoCs, one to disable the PL330
DMA controller by default since it can be left in reset by the
bootloader and the second to correct the flow accelerator mailbox node
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl7tHWoACgkQh9CWnEQH
BwRDchAA2hFRfyOVO/HZR4g30bUBDAQ4jBfHGHHdMsH3EiGWwLJvxmMjc/1Bu41M
0lJgtr1D+CESY9CopV42l4c0tckPVyBpbmVAhlBKadkCOLfk6tuvZ3cKAxx6FA2g
BMRvxx/dKQ5rhQu2AN43bw7izeLMvU0Pz3Tgtshd84A8ntXnP3ElaNqhtiAHsu83
OjpVpLebaK6eQxoeByZn/zoqmlKCHd3+8n/OTid5VWr4TdmlowK+ziJle7bAmaGi
r5Cqqsfl03s0vca3NaDhQbmD05gQIkVzVSg64ujSFPG8GgqFscG4Zti8lRv4BJUZ
7HT+3bwiymx06czW1tG3kjDTz4ae5WyzgEabhfKGn4fcJUI49wtB4hdVZD3pjQXh
sb8u4Pqy+CTGkrxX6U+8UNuav5JCqU52MtLBTFz98xuZsMnjFADxohx2pcKhgLpR
eOkrUbz/jtesCbuT4UnhxE2mBsjQHrB8UB1/iknOO+7BA1ulRhpCjpHgkOdNeDvM
dpOYIpj0p/YZaQaTztepyecdT7z9GwaOJ9Y+AQotSz8unhiEJpBLWK2Hz2j+PB1D
oxnYtlG8fPObJmaw0dAfmsS2CXCsi+d88AmDOjaJNFbnfxXaVKyCHf8Ud3bxR0CV
qitQkZlEr30NWxvP1s0jR+HHy3Q9phYMaf+KsRdBuTdCukePR9Y=
=SUaO
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.8/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.8, please pull the following:
- Rafal adds a missing 'device_type' property to the Luxul XWC-2000
required for the memory nodes to be correctly parsed by Linux
- Matthew provides two fixes for the NSP SoCs, one to disable the PL330
DMA controller by default since it can be left in reset by the
bootloader and the second to correct the flow accelerator mailbox node
* tag 'arm-soc/for-5.8/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: NSP: Correct FA2 mailbox node
ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000
Link: https://lore.kernel.org/r/20200619202250.19029-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 7b8e0188fa.
Initially, STiH410-B2260 was supposed to be secured, that's why
l2c_write_sec was stubbed to avoid secure register access from
non secure world.
But by default, STiH410-B2260 is running in non secure mode,
so L2 cache register accesses are authorized, l2c_write_sec stub
is not needed.
With this patch, L2 cache is configured and performance are enhanced.
Link: https://lore.kernel.org/r/20200618172456.29475-1-patrice.chotard@st.com
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few fixes for various devices:
- Prevent pocketgeagle header line signal from accidentally setting
micro-SD write protection signal by removing the default mux
- Fix NFSroot flakeyness after resume for duover by switching the
smsc911x gpio interrupt to back to level sensitive
- Fix regression for omap4 clockevent source after recent system
timer changes
- Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid"
phy-mode
-----BEGIN PGP SIGNATURE-----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=Hqfw
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes
Few dts fixes for omaps for v5.8
Few fixes for various devices:
- Prevent pocketgeagle header line signal from accidentally setting
micro-SD write protection signal by removing the default mux
- Fix NFSroot flakeyness after resume for duover by switching the
smsc911x gpio interrupt to back to level sensitive
- Fix regression for omap4 clockevent source after recent system
timer changes
- Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid"
phy-mode
* tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode
ARM: dts: Fix omap4 system timer source clocks
ARM: dts: Fix duovero smsc interrupt for suspend
ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect
Link: https://lore.kernel.org/r/pull-1592499282-121092@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I forgot to send a pull request earlier for converting am3 and am4 to
use sdhci-omap driver instead of the old omap_hsmmc driver.
There was a display subsystem related suspend and resume regression found
recently and looks like I forgot to send a pull request for this patch
while debugging the regression. This patch has been tested without the
display subsystem, and has been in Linux next for several weeks now, so
would be good to have merged for v5.8.
-----BEGIN PGP SIGNATURE-----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=UNki
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.8/dt-missed-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes
Missed sdhci patch for am3 and am4
I forgot to send a pull request earlier for converting am3 and am4 to
use sdhci-omap driver instead of the old omap_hsmmc driver.
There was a display subsystem related suspend and resume regression found
recently and looks like I forgot to send a pull request for this patch
while debugging the regression. This patch has been tested without the
display subsystem, and has been in Linux next for several weeks now, so
would be good to have merged for v5.8.
* tag 'omap-for-v5.8/dt-missed-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver
Link: https://lore.kernel.org/r/pull-1591637467-607254@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Change the TEE mailing list in MAINTAINERS
* tag 'tee-ml-for-v5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee:
MAINTAINERS: change tee mailing list
Link: https://lore.kernel.org/r/20200616075948.GA2288211@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The recent display subsystem (DSS) related platform data changes caused
display related regressions for suspend and resume. Looks like I only
tested suspend and resume before dropping the legacy platform data, and
forgot to test it after dropping it. Turns out the main issue was that
we no longer have platform code calling pm_runtime_suspend for DSS like
we did for the legacy platform data case, and that fix is still being
discussed on the dri-devel list and will get merged separately. The DSS
related testing exposed a pile other other display related issues that
also need fixing though:
- Fix ti-sysc optional clock handling and reset status checks
for devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested
to avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Then there is a pile of other fixes not related to the DSS:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
-----BEGIN PGP SIGNATURE-----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=fT9A
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.8
The recent display subsystem (DSS) related platform data changes caused
display related regressions for suspend and resume. Looks like I only
tested suspend and resume before dropping the legacy platform data, and
forgot to test it after dropping it. Turns out the main issue was that
we no longer have platform code calling pm_runtime_suspend for DSS like
we did for the legacy platform data case, and that fix is still being
discussed on the dri-devel list and will get merged separately. The DSS
related testing exposed a pile other other display related issues that
also need fixing though:
- Fix ti-sysc optional clock handling and reset status checks
for devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested
to avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Then there is a pile of other fixes not related to the DSS:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
* tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
Revert "bus: ti-sysc: Increase max softreset wait"
ARM: dts: am437x-epos-evm: remove lcd timings
ARM: dts: am437x-gp-evm: remove lcd timings
ARM: dts: am437x-sk-evm: remove lcd timings
ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes
ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks
ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag
ARM: dts: Fix am33xx.dtsi USB ranges length
bus: ti-sysc: Increase max softreset wait
ARM: OMAP2+: Fix legacy mode dss_reset
bus: ti-sysc: Fix uninitialized framedonetv_irq
bus: ti-sysc: Ignore clockactivity unless specified as a quirk
bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit
ARM: dts: omap4-droid4: Fix spi configuration and increase rate
bus: ti-sysc: Flush posted write on enable and disable
soc: ti: omap-prm: use atomic iopoll instead of sleeping one
Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The cell name stored in the afs_cell struct is a 64-char + NUL buffer -
when it needs to be able to handle up to AFS_MAXCELLNAME (256 chars) + NUL.
Fix this by changing the array to a pointer and allocating the string.
Found using Coverity.
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=5BTi
-----END PGP SIGNATURE-----
Merge tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six cifs/smb3 fixes, three of them for stable.
Fixes xfstests 451, 313 and 316"
* tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: misc: Use array_size() in if-statement controlling expression
cifs: update ctime and mtime during truncate
cifs/smb3: Fix data inconsistent when punch hole
cifs/smb3: Fix data inconsistent when zero file range
cifs: Fix double add page to memcg when cifs_readpages
cifs: Fix cached_fid refcnt leak in open_shroot
Six small fixes, five in drivers and one to correct another minor
regression from cc97923a5b ("block: move dma drain handling to
scsi") where we still need the drain stub to be built in to the kernel
for the modular libata, non-modular SAS driver case.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXvdzJCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZ9rAQDyfZbP
IIIqNRr8MSBVxnb50LjmLl4NZH7xWzjch0oRfwD/ZS/QRoe/nNQUsiW65yK83ueC
QBz3bxQWAwKm0yFGzqY=
=gHK+
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six small fixes, five in drivers and one to correct another minor
regression from cc97923a5b ("block: move dma drain handling to
scsi") where we still need the drain stub to be built in to the kernel
for the modular libata, non-modular SAS driver case"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptscsih: Fix read sense data size
scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action
scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset()
scsi: libata: Fix the ata_scsi_dma_need_drain stub
scsi: qla2xxx: Keep initiator ports after RSCN
scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request
Pull i2c fixes from Wolfram Sang:
"This contains a 5.8 regression fix for the Designware driver, a
register bitfield fix for the fsi driver, and a missing sanity check
for the I2C core"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: check returned size of emulated smbus block read
i2c: fsi: Fix the port number field in status register
i2c: designware: Adjust bus speed independently of ACPI
Here are a small number of tiny staging driver fixes for 5.8-rc3.
Not much here, but there were some reported problems to be fixed:
- 3 wfx driver fixes
- rtl8723bs driver fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXvcv3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynlKQCgty4E/Ey6Tfi6RhskXoR6qY0h0ooAmgNUsVvc
qpuJ2oK5bC4pwYtXBEFt
=dTn7
-----END PGP SIGNATURE-----
Merge tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a small number of tiny staging driver fixes for 5.8-rc3.
Not much here, but there were some reported problems to be fixed:
- three wfx driver fixes
- rtl8723bs driver fix
All of these have been in linux-next with no reported issues"
* tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate()
staging: wfx: fix coherency of hif_scan() prototype
staging: wfx: drop useless loop
staging: wfx: fix AC priority
Here are some small USB fixes for 5.8-rc3 to resolve some reported
issues.
Nothing major here:
- gadget driver fixes
- cdns3 driver fixes
- xhci fixes
- renesas_usbhs driver fixes
- some new device support with ids
- documentation update
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXvcu5w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymcewCgrSLzmFCeXWeoK5qIyv+hRaBu1eoAoJ2eDihC
5ahPGEU1CGstW3Rp0Yhv
=LAT6
-----END PGP SIGNATURE-----
Merge tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.8-rc3 to resolve some reported
issues.
Nothing major here:
- gadget driver fixes
- cdns3 driver fixes
- xhci fixes
- renesas_usbhs driver fixes
- some new device support with ids
- documentation update
All of these have been in linux-next with no reported issues"
* tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
usb: renesas_usbhs: getting residue from callback_result
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
xhci: Poll for U0 after disabling USB2 LPM
xhci: Return if xHCI doesn't support LPM
usb: host: xhci-mtk: avoid runtime suspend when removing hcd
xhci: Fix enumeration issue when setting max packet size for FS devices.
xhci: Fix incorrect EP_STATE_MASK
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
usb: gadget: udc: Potential Oops in error handling code
usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe()
usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs
USB: ohci-sm501: Add missed iounmap() in remove
cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip
...
Some tiny char/misc driver fixes for 5.8-rc3.
"largest" changes are in the mei driver, to resolve some reported
problems and add some new device ids. There's also a binder bugfix, an
fpga driver build fix, and some assorted habanalabs fixes.
All of these, except for the habanalabs fixes, have been in linux-next
with no reported issues. The habanalabs driver changes showed up in my
tree on Friday, but as they are totally self-contained, all should be
good there.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXvcvdw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUegCfef+R3pnqXZMwhFq78cbwqjk7eEoAn0YI2E4E
f3o8/tqTRpE2JzU1iCaM
=IXum
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Some tiny char/misc driver fixes for 5.8-rc3.
The "largest" changes are in the mei driver, to resolve some reported
problems and add some new device ids. There's also a binder bugfix, an
fpga driver build fix, and some assorted habanalabs fixes.
All of these, except for the habanalabs fixes, have been in linux-next
with no reported issues. The habanalabs driver changes showed up in my
tree on Friday, but as they are totally self-contained, all should be
good there"
* tag 'char-misc-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: increase h/w timer when checking idle
habanalabs: Correct handling when failing to enqueue CB
habanalabs: increase GAUDI QMAN ARB WDT timeout
habanalabs: rename mmu_write() to mmu_asid_va_write()
habanalabs: use PI in MMU cache invalidation
habanalabs: block scalar load_and_exe on external queue
mei: me: add tiger lake point device ids for H platforms.
mei: me: disable mei interface on Mehlow server platforms
binder: fix null deref of proc->context
fpga: zynqmp: fix modular build
rate on family 0x15 CPUs
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl73JTwACgkQEsHwGGHe
VUrKhw/9FwG6ow1vBVqwqwBItAlJ7wVBSE27iLnPoCtIIsvci1duAysJ03WlfeDf
KnqhpHYRmzLwUYmDggzlumltE4aR0wgTDaknCC6SdkWEpzdNBgFxtTUPZwmRR25m
TJDuVbdbqpV8sKc3E/5YY1Z7FLAeSJJJLKTMyWnm8FXpTXfQ9zbBQtvOoJS2+tpb
k2H/jlw/ws4K7YLs/YiHD8oBpC+S2vEZGRq9iaOJ0Hze47+IpHdg0uSWG/aMlgr8
IkPwOP6bbuSxfZWeG+y15VGexPyo2IDMK1bEV4nxrkl9vr/m+q2dcmGPh3qQmy4N
/JdF8bCTiyw8AKwCHUkVP6I9kML9aIHiHVlfcCkpHB5EsC8WEJi/d5Ilf0Wq99HX
gDEsO3abOaleCqsntdfkk4ZANgHcnx90kToQLNgsjmIPz/qCx9btWgTQkOTb0khw
po6pExW+JRQ6Q9ZSUe5N15tWKoMIiJE/7mtnbTOXtxzCAcj7Fw+wAFhDo91cmtti
3CSIftzN7yyd/ruNa/XcJ/Aq+GYNnx7N5zz6nLo6sDsWeO4URWLigV7HLuH+3OPi
wedlzyjqwFYx9Blv9Uu1FnvpOv/qt6ofMnqiEOgyOpKu7kiwuYJ0LX10Q8n/R5k3
iwxTD3LofYSo3RSJbQ1f9qio789TRbtTj4l+/WVFn+wyNXDDFNA=
=Ti/g
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"A single fix for amd64_edac restoring the reporting of the DRAM scrub
rate on family 0x15 CPUs"
* tag 'edac_urgent_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Read back the scrub rate PCI register on F15h
Stable Fixes:
- xprtrdma: Fix handling of RDMA_ERROR replies
- sunrpc: Fix rollback in rpc_gssd_dummy_populate()
- pNFS/flexfiles: Fix list corruption if the mirror count changes
- NFSv4: Fix CLOSE not waiting for direct IO completion
- SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
Other Fixes:
- xprtrdma: Fix a use-after-free with r_xprt->rx_ep
- Fix other xprtrdma races during disconnect
- NFS: Fix memory leak of export_path
-----BEGIN PGP SIGNATURE-----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=BzX9
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"Stable Fixes:
- xprtrdma: Fix handling of RDMA_ERROR replies
- sunrpc: Fix rollback in rpc_gssd_dummy_populate()
- pNFS/flexfiles: Fix list corruption if the mirror count changes
- NFSv4: Fix CLOSE not waiting for direct IO completion
- SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
Other Fixes:
- xprtrdma: Fix a use-after-free with r_xprt->rx_ep
- Fix other xprtrdma races during disconnect
- NFS: Fix memory leak of export_path"
* tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
NFSv4 fix CLOSE not waiting for direct IO compeletion
pNFS/flexfiles: Fix list corruption if the mirror count changes
nfs: Fix memory leak of export_path
sunrpc: fixed rollback in rpc_gssd_dummy_populate()
xprtrdma: Fix handling of RDMA_ERROR replies
xprtrdma: Clean up disconnect
xprtrdma: Clean up synopsis of rpcrdma_flush_disconnect()
xprtrdma: Use re_connect_status safely in rpcrdma_xprt_connect()
xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed
-----BEGIN PGP SIGNATURE-----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=ar3Q
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Three small fixes:
- Close a corner case for polled IO resubmission (Pavel)
- Toss commands when exiting (Pavel)
- Fix SQPOLL conditional reschedule on perpetually busy submit
(Xuan)"
* tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
io_uring: fix current->mm NULL dereference on exit
io_uring: fix hanging iopoll in case of -EAGAIN
io_uring: fix io_sq_thread no schedule when busy
-----BEGIN PGP SIGNATURE-----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=pQH7
-----END PGP SIGNATURE-----
Merge tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- multipath deadlock fixes (Anton)
- NUMA fixes (Max)
- RDMA completion vector fix (Max)
- IO deadlock fix (Sagi)
- multipath reference fix (Sagi)
- NS mutation fix (Sagi)
- Use right allocator when freeing bip in error path (Chengguang)
* tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
nvme-multipath: fix bogus request queue reference put
nvme-multipath: fix deadlock due to head->lock
nvme: don't protect ns mutation with ns->head->lock
nvme-multipath: fix deadlock between ana_work and scan_work
nvme: fix possible deadlock when I/O is blocked
nvme-rdma: assign completion vector correctly
nvme-loop: initialize tagset numa value to the value of the ctrl
nvme-tcp: initialize tagset numa value to the value of the ctrl
nvme-pci: initialize tagset numa value to the value of the ctrl
nvme-pci: override the value of the controller's numa node
nvme: set initial value for controller's numa node
block: release bip in a right way in error path
Considering the amount of dm-zoned changes that went in during the
5.8 merge window these fixes are not that surprising.
- A few DM writecache target fixes.
- A fix to Documentation index to include DM ebs target docs.
- Small cleanup to use struct_size() in DM core's retrieve_deps().
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl72SdYTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWtzXB/4y42NJLrH8EXNW/bGIpPlexpbWRW29
5z6V1VL/q/s9AWrDunLsvhMAtx38FjHJO6i8GQld/gKRtEbOMHfEItsyrQZqKoSr
M1NzlthuwFnUS30Uq6i06/ihdH5DDEhTElLs7+Q7pvNUd+KiI0mTgM/y856x3s4p
4OMG1qEi6AnwvYFyCgu/w7/LLBYRipis+j+cm9Y0cTZujh4QBTeeQdBsu++fit2G
7U1jkddiQSlb8DrbziRt9JK5WrvR4WpQmP9bnK1SxZtKY/55ZNpuNmFnUmUCgUAY
Y7CEafoElJ6XYTBzKgYSDqY/eutXSzaxn1euDWizDS4H7kdgDS+3uVT9
=zq2g
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Quite a few DM zoned target fixes and a Zone append fix in DM core.
Considering the amount of dm-zoned changes that went in during the
5.8 merge window these fixes are not that surprising.
- A few DM writecache target fixes.
- A fix to Documentation index to include DM ebs target docs.
- Small cleanup to use struct_size() in DM core's retrieve_deps().
* tag 'for-5.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm writecache: add cond_resched to loop in persistent_memory_claim()
dm zoned: Fix reclaim zone selection
dm zoned: Fix random zone reclaim selection
dm: update original bio sector on Zone Append
dm zoned: Fix metadata zone size check
docs: device-mapper: add dm-ebs.rst to an index file
dm ioctl: use struct_size() helper in retrieve_deps()
dm writecache: skip writecache_wait when using pmem mode
dm writecache: correct uncommitted_block when discarding uncommitted entry
dm zoned: assign max_io_len correctly
dm zoned: fix uninitialized pointer dereference
The main change here is a fix for a number of unsafe interactions
between kdb and the console system. The fixes are specific to kdb (pure
kgdb debugging does not use the console system at all). On systems with
an NMI then kdb, if it is enabled, must get messages to the user despite
potentially running from some "difficult" calling contexts. These fixes
avoid using the console system where we have been provided an
alternative (safer) way to interact with the user and, if using the
console system in unavoidable, use oops_in_progress for deadlock
avoidance. These fixes also ensure kdb honours the console enable flag.
Also included is a fix that wraps kgdb trap handling in an RCU read lock
to avoids triggering diagnostic warnings. This is a wide lock scope but
this is OK because kgdb is a stop-the-world debugger. When we stop the
world we put all the CPUs into holding pens and this inhibits RCU update
anyway.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=ovnT
-----END PGP SIGNATURE-----
Merge tag 'kgdb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb fixes from Daniel Thompson:
"The main change here is a fix for a number of unsafe interactions
between kdb and the console system. The fixes are specific to kdb
(pure kgdb debugging does not use the console system at all). On
systems with an NMI then kdb, if it is enabled, must get messages to
the user despite potentially running from some "difficult" calling
contexts. These fixes avoid using the console system where we have
been provided an alternative (safer) way to interact with the user
and, if using the console system in unavoidable, use oops_in_progress
for deadlock avoidance. These fixes also ensure kdb honours the
console enable flag.
Also included is a fix that wraps kgdb trap handling in an RCU read
lock to avoids triggering diagnostic warnings. This is a wide lock
scope but this is OK because kgdb is a stop-the-world debugger. When
we stop the world we put all the CPUs into holding pens and this
inhibits RCU update anyway"
* tag 'kgdb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: Avoid suspicious RCU usage warning
kdb: Switch to use safer dbg_io_ops over console APIs
kdb: Make kdb_printf() console handling more robust
kdb: Check status of console prior to invoking handlers
kdb: Re-factor kdb_printf() message write code
A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y.
Two minor build fixes.
Thanks to:
Aneesh Kumar K.V, Arseny Solokha, Harish.
-----BEGIN PGP SIGNATURE-----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=TvGN
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y.
- Two minor build fixes.
Thanks to: Aneesh Kumar K.V, Arseny Solokha, Harish.
* tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build failure in ebb tests
powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUAL
powerpc/fsl_booke/32: Fix build with CONFIG_RANDOMIZE_BASE
This contains a handful of fixes I'd like to target for rc3. Most of them fix
issues with the conversion of our vDSO to C. There is also one fix to the
SiFive PRCI driver that I picked up as it's causing boot issues on the
hardware.
* A fix to allow kernels with dynamic ftrace to use the vDSO.
* Some build fixes for the C vDSO functions.
* A fix to the PRCI driver's memory allocation, which was the cause of some
boot panics with FREELIST_RANDOM.
-----BEGIN PGP SIGNATURE-----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=Pupr
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a handful of fixes I'd like to target for rc3.
Most of them fix issues with the conversion of our vDSO to C. There is
also one fix to the SiFive PRCI driver that I picked up as it's
causing boot issues on the hardware.
- A fix to allow kernels with dynamic ftrace to use the vDSO.
- Some build fixes for the C vDSO functions.
- A fix to the PRCI driver's memory allocation, which was the cause
of some boot panics with FREELIST_RANDOM"
* tag 'riscv-for-linus-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup __vdso_gettimeofday broke dynamic ftrace
riscv: Add extern declarations for vDSO time-related functions
clk: sifive: allocate sufficient memory for struct __prci_data
riscv: Add -fPIC option to CFLAGS_vgettimeofday.o
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl71tgEQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNB5sB/48VLEeDtkRtHVQntLG9SFogwDkHjkRW/lo
kgO5APEcdhZZq3mBY2fIww5iX5Et7vRpx8ovempmqZGhO9B4ZMSNG0DFxoYdtXTU
jgox+LzkW+hYldK1Bv03ioLZgIz6Lc8zyK6kRB7NuDN88VEVds0ksYmcAojeIN9b
vmpquEAoVppm0VPjt6VA0xQ6HtiKfvlV7PW6Pqs0dKovnNY982jRXBMzaGBbDFQ7
3eKmW4PBru/Ew16J172vf/0sBJQBiZrSdXCqv/USKvPHkUDkJiYsaWLpsWx4m4to
bE/OS6aWx94NcgxPUca3y2G2OhPU+VFiXjuJ0kvzt4EJIuW/CGUf
=2kBR
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The big fix here is to our vDSO sigreturn trampoline as, after a
painfully long stint of debugging, it turned out that fixing some of
our CFI directives in the merge window lit up a bunch of logic in
libgcc which has been shown to SEGV in some cases during asynchronous
pthread cancellation.
It looks like we can fix this by extending the directives to restore
most of the interrupted register state from the sigcontext, but it's
risky and hard to test so we opted to remove the CFI directives for
now and rely on the unwinder fallback path like we used to.
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist
arm64: perf: Report the PC value in REGS_ABI_32 mode
kselftest: arm64: Remove redundant clean target
arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist
arm64: Don't insert a BTI instruction at inner labels
arm64: vdso: Don't use gcc plugins for building vgettimeofday.c
arm64: vdso: Only pass --no-eh-frame-hdr when linker supports it
arm64: Depend on newer binutils when building PAC
arm64: compat: Remove 32-bit sigreturn code from the vDSO
arm64: compat: Always use sigpage for sigreturn trampoline
arm64: compat: Allow 32-bit vdso and sigpage to co-exist
arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline
Like Xu
Wei Wang
Linus Torvalds
Vincent Guittot
Peter Zijlstra
Juri Lelli
Scott Wood
Arnd Bergmann
Patrice Chotard
David Howells