Граф коммитов

31 Коммитов

Автор SHA1 Сообщение Дата
Bernd Schmidt dbdf20db53 Blackfin arch: Faster C implementation of no-MPU CPLB handler
This is a mixture ofcMichael McTernan's patch and the existing cplb-mpu code.

We ditch the old cplb-nompu implementation, which is a good example of
why a good algorithm in a HLL is preferrable to a bad algorithm written in
assembly.  Rather than try to construct a table of all posible CPLBs and
search it, we just create a (smaller) table of memory regions and
their attributes.  Some of the data structures are now unified for both
the mpu and nompu cases.  A lot of needless complexity in cplbinit.c is
removed.

Further optimizations:
  * compile cplbmgr.c with a lot of -ffixed-reg options, and omit saving
    these registers on the stack when entering a CPLB exception.
  * lose cli/nop/nop/sti sequences for some workarounds - these don't
  * make
    sense in an exception context

Additional code unification should be possible after this.

[Mike Frysinger <vapier.adi@gmail.com>:
 - convert CPP if statements to C if statements
 - remove redundant statements
 - use a do...while loop rather than a for loop to get slightly better
   optimization and to avoid gcc "may be used uninitialized" warnings ...
   we know that the [id]cplb_nr_bounds variables will never be 0, so this
   is OK
 - the no-mpu code was the last user of MAX_MEM_SIZE and with that rewritten,
   we can punt it
 - add some BUG_ON() checks to make sure we dont overflow the small
   cplb_bounds array
 - add i/d cplb entries for the bootrom because there is functions/data in
   there we want to access
 - we do not need a NULL trailing entry as any time we access the bounds
   arrays, we use the nr_bounds variable
]

Signed-off-by: Michael McTernan <mmcternan@airvana.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Graf Yang dbc895f955 Blackfin arch: smp patch cleanup from LKML review
1. Use inline get_l1_... functions instead of macro
2. Fix compile issue about smp barrier functions

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger 0b82e27444 Blackfin arch: fix unused warning for some blackfin derivatives
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Graf Yang 8f65873e47 Blackfin arch: SMP supporting patchset: Blackfin kernel and memory management code
Blackfin dual core BF561 processor can support SMP like features.
https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like

In this patch, we provide SMP extend to Blackfin kernel and memory management code

Singed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Jie Zhang b2c2f30388 Blackfin arch: fix bug - shared lib function in L2 failed be called
Allow user space to access L2 SRAM.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28 15:57:49 +08:00
Robin Getz 9df10281e1 Blackfin arch: Use DTEST rather than DMA to poke at L1 SRAM during exception context
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08 18:03:33 +08:00
Robin Getz 5e95320f9f Blackfin arch: rename blackfin_sram.c to sram-alloc.c
rename blackfin_sram.c to sram-alloc.c (we know it is a blackfin file,
since it is in arch/blackfin) - and there is no "driver" code in there,
it is just an allocator/deallocator for L1 and L2 sram.

Also fix a problem that checkpatch pointed out

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08 17:22:49 +08:00
Vegard Nossum 226a6ec311 Blackfin arch: sram: use 'unsigned long' for irqflags
Using just 'unsigned' will make flags an unsigned int. While this is
arguably not an error on blackfin where sizeof(int) == sizeof(long),
the patch is still justified on the grounds of principle.

The patch was generated using the Coccinelle semantic patch framework.

Cc: Julia Lawall <julia@diku.dk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-28 17:28:46 +08:00
Sonic Zhang 225f7e1eb5 Blackfin arch: Fix bug - when to rmmod the L1_module, it stucks and then reboot the board.
Fix this by correcting the wrong pointer

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-25 18:00:45 +08:00
Mike Frysinger 07aa7be570 Blackfin arch: convert L2 defines to be the same as the L1 defines
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-13 16:16:11 +08:00
Linus Torvalds 7f268a2ba7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits)
  Blackfin arch: If we double fault, rather than hang forever, reset
  Blackfin arch: When icache is off, make sure people know it
  Blackfin arch: Fix bug - skip single step in high priority interrupt handler instead of disabling all interrupts in single step debugging.
  Blackfin arch: cache the values of vco/sclk/cclk as the overhead of doing so (~24 bytes) is worth avoiding the software mult/div routines
  Blackfin arch: fix bug - IMDMA is not type struct dma_register
  Blackfin arch: check the EXTBANKS field of the DDRCTL1 register to see if we are using both memory banks
  Blackfin arch: Apply Bluetechnix CM-BF527 board support patch
  Blackfin arch: Add unwinding for stack info, and a little more detail on trace buffer
  Blackfin arch: Add ISP1760 board resources to BF548-EZKIT
  Blackfin arch: fix bug - detect 0.1 silicon revision BF527-EZKIT as 0.0 version
  Blackfin arch: add missing IORESOURCE_MEM flags to UART3
  Blackfin arch: Add return value check in bfin_sir_probe(), remove SSYNC().
  Blackfin arch:  Extend sram malloc to handle L2 SRAM.
  Blackfin arch: Remove useless config option.
  Blackfin arch:  change L1 malloc to base on slab cache and lists.
  Blackfin arch: use local labels and ENDPROC() markings
  Blackfin arch: Do not need this dualcore test module in kernel.
  Blackfin arch: Allow ptrace to peek and poke application data in L1 data SRAM.
  Blackfin arch: Add ANOMALY_05000368 workaround
  Blackfin arch: Functional power management support
  ...
2008-07-26 13:23:17 -07:00
Johannes Weiner a2e9c44337 blackfin: use generic show_mem()
Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:10 -07:00
Sonic Zhang 262c3825a9 Blackfin arch: Extend sram malloc to handle L2 SRAM.
Extend system call to alloc L2 SRAM in application.
Automatically move following sections to L2 SRAM:
1. kernel built-in l2 attribute section
2. kernel module l2 attribute section
3. elf-fdpic application l2 attribute section

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 15:42:41 +08:00
Sonic Zhang 5d481f4975 Blackfin arch: change L1 malloc to base on slab cache and lists.
Remove the sram piece limitation and improve the performance to
alloc/free sram piece data.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 14:51:31 +08:00
Mike Frysinger 260d5d3517 Blackfin arch: Fix bug - do not overflow the buffer given to us which tends to happen when CONFIG_L1_MAX_PIECE is increased past its default
Singed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-14 16:34:05 +08:00
Meihui Fan c5b50df8f0 [Blackfin] arch: fix bug - make sure we check the right L1 length
Signed-off-by: Meihui Fan <mhfan@hhcn.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 08:55:26 +08:00
Bryan Wu c051489df8 [Blackfin] arch: kill section mismatch warnings
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-29 12:02:10 +08:00
Yi Li 856783b37a [Blackfin] arch: add "memmap=nn[KMG]@ss[KMG]" and "memmap=nn[KMG]$ss[KMG]" options to blackfin, based on arch/i386/kernel/e820.c
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-09 02:26:01 +08:00
Yi Li ee7883b746 [Blackfin] arch: fix bug kernel boot message: memory information is not reasonable
Some of the information in kernel boot message is not reasonable.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3846

 - use _rambase as the start of kernel image.
   kernel is in the region [_rambase, _ramstart]
 - count in pages in per-cpu-page list as available memory
 - reserved memory now include: [0 - 4K] for bad pointer catching,
   memory reserved for abnormaly 05000263, memory reserved by kernel itself.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27 19:56:17 +08:00
Bernd Schmidt b97b8a9983 [Blackfin] arch: Initial checkin of the memory protection support.
Enable it with CONFIG_MPU.

Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27 18:39:16 +08:00
Mike Frysinger 70b63ba739 Blackfin arch: do not include linux/autoconf.h
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:22:53 +08:00
Robin Getz b76f98761a Blackfin arch: show_mem can not be marked as init, since it is called during OOM condition
show_mem can not be marked as init, since it is called during
OOM condition from /mm/oom_kill.c:out_of_memory() and
/mm/page_alloc.c:__alloc_pages()

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 17:25:15 +08:00
Yoann Padioleau dd00cc486a some kmalloc/memset ->kzalloc (tree wide)
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

Here is a short excerpt of the semantic patch performing
this transformation:

@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@

 x =
- kmalloc
+ kzalloc
  (E1,E2)
  ...  when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);

@@
expression E1,E2,E3;
@@

- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)

[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:50 -07:00
Mike Frysinger 1d1894749c Blackfin arch: combine the common code of free_initrd_mem and free_initmem
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 12:32:00 +08:00
Mike Frysinger 1f83b8f148 Blackfin arch: cleanup warnings from checkpatch -- no functional changes
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 22:58:21 +08:00
Mike Frysinger 43a3188ea3 Blackfin arch: make sure we initialize our L1 Data B section properly based on the linked kernel
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14 13:33:37 +08:00
Mike Frysinger bc61b4e69d Blackfin arch: implement a basic /proc/sram file for L1 allocation visibility
implement a basic /proc/sram file for L1 allocation visibility until we can
rewrite the entire L1 allocator (which would include a proper mechanism)

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14 13:21:08 +08:00
Mike Frysinger 321f6e0f51 Blackfin arch: mark our memory init functions with __init so they get freed after init
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 15:31:30 +08:00
Simon Arlott d2d50aa97d Blackfin arch: spelling fixes
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 15:31:30 +08:00
Aubrey Li e3defffe91 Blackfin arch: ISP1761 doesn't work for USB flash disk
ZONE_DMA is required for some drivers subsystem, such as USB/SCSI.

Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:50:21 -07:00
Bryan Wu 1394f03221 blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix!  Tinyboards.

The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc.  (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000.  Since then ADI has put this core into its Blackfin
processor family of devices.  The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set.  It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.

The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf

The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc

This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/

We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel

[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:58 -07:00