commit 977fe773dcc7098d8eaf4ee6382cb51e13e784cb upstream.
This reverts commit 1a19755519.
This commit causes interrupts to be lost for FCoE devices, since it changed
sping locks from "bh" to "irqsave".
Instead, a work queue should be used, and will be addressed in a separate
commit.
Fixes: 1a19755519 ("scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock")
Signed-off-by: Lee Duncan <lduncan@suse.com>
Link: https://lore.kernel.org/r/c578cdcd46b60470535c4c4a953e6a1feca0dffd.1707500786.git.lduncan@suse.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a19755519 ]
There is a long call chain that &fip->ctlr_lock is acquired by isr
fnic_isr_msix_wq_copy() under hard IRQ context. Thus other process context
code acquiring the lock should disable IRQ, otherwise deadlock could happen
if the IRQ preempts the execution while the lock is held in process context
on the same CPU.
[ISR]
fnic_isr_msix_wq_copy()
-> fnic_wq_copy_cmpl_handler()
-> fnic_fcpio_cmpl_handler()
-> fnic_fcpio_flogi_reg_cmpl_handler()
-> fnic_flush_tx()
-> fnic_send_frame()
-> fcoe_ctlr_els_send()
-> spin_lock_bh(&fip->ctlr_lock)
[Process Context]
1. fcoe_ctlr_timer_work()
-> fcoe_ctlr_flogi_send()
-> spin_lock_bh(&fip->ctlr_lock)
2. fcoe_ctlr_recv_work()
-> fcoe_ctlr_recv_handler()
-> fcoe_ctlr_recv_els()
-> fcoe_ctlr_announce()
-> spin_lock_bh(&fip->ctlr_lock)
3. fcoe_ctlr_recv_work()
-> fcoe_ctlr_recv_handler()
-> fcoe_ctlr_recv_els()
-> fcoe_ctlr_flogi_retry()
-> spin_lock_bh(&fip->ctlr_lock)
4. -> fcoe_xmit()
-> fcoe_ctlr_els_send()
-> spin_lock_bh(&fip->ctlr_lock)
spin_lock_bh() is not enough since fnic_isr_msix_wq_copy() is a
hardirq.
These flaws were found by an experimental static analysis tool I am
developing for irq-related deadlock.
The patch fix the potential deadlocks by spin_lock_irqsave() to disable
hard irq.
Fixes: 794d98e77f ("[SCSI] libfcoe: retry rejected FLOGI to another FCF if possible")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Link: https://lore.kernel.org/r/20230817074708.7509-1-dg573847474@gmail.com
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4155658cee ]
fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when
fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed
&fcoe_sw_transport on fcoe_transports list. This causes panic when
reinserting module.
BUG: unable to handle page fault for address: fffffbfff82e2213
RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe]
Call Trace:
<TASK>
do_one_initcall+0xd0/0x4e0
load_module+0x5eee/0x7210
...
Fixes: 78a582463c ("[SCSI] fcoe: convert fcoe.ko to become an fcoe transport provider driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221115092442.133088-1-chenzhongjin@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47b6a122c7 ]
If device_register() returns an error, the name allocated by dev_set_name()
needs to be freed. As the comment of device_register() says, one should use
put_device() to give up the reference in the error path. Fix this by
calling put_device(), then the name can be freed in kobject_cleanup().
The 'fcf' is freed in fcoe_fcf_device_release(), so the kfree() in the
error path can be removed.
The 'ctlr' is freed in fcoe_ctlr_device_release(), so don't use the error
label, just return NULL after calling put_device().
Fixes: 9a74e884ee ("[SCSI] libfcoe: Add fcoe_sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112094310.3633291-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54db804d5d ]
Fix the following Wstringop-overflow warnings when building with GCC-11:
drivers/scsi/fcoe/fcoe.c: In function ‘fcoe_netdev_config’:
drivers/scsi/fcoe/fcoe.c:744:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
744 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, 1, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/fcoe/fcoe.c:744:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/fcoe/fcoe.c:36:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
drivers/scsi/fcoe/fcoe.c:747:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
747 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
748 | 2, 0);
| ~~~~~
drivers/scsi/fcoe/fcoe.c:747:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/fcoe/fcoe.c:36:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
CC drivers/scsi/bnx2fc/bnx2fc_io.o
In function ‘bnx2fc_net_config’,
inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
833 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
834 | 1, 0);
| ~~~~~
drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/bnx2fc/bnx2fc.h:53,
from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
In function ‘bnx2fc_net_config’,
inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
839 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
840 | 2, 0);
| ~~~~~
drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/bnx2fc/bnx2fc.h:53,
from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’:
drivers/scsi/qedf/qedf_main.c:3520:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
3520 | qedf->wwnn = fcoe_wwn_from_mac(qedf->mac, 1, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c:3520:30: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/qedf/qedf.h:9,
from drivers/scsi/qedf/qedf_main.c:23:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c:3521:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
3521 | qedf->wwpn = fcoe_wwn_from_mac(qedf->mac, 2, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c:3521:30: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/qedf/qedf.h:9,
from drivers/scsi/qedf/qedf_main.c:23:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
by changing the array size to the correct value of ETH_ALEN in the
argument declaration.
Also, fix a couple of checkpatch warnings:
WARNING: function definition argument 'unsigned int' should also have an identifier name
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/181
Fixes: 85b4aa4926 ("[SCSI] fcoe: Fibre Channel over Ethernet")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy() avoid using an inline const buffer
argument and instead just statically initialize the destination array
directly.
Link: https://lore.kernel.org/r/20210602180000.3326448-1-keescook@chromium.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suppress the following compiler warning:
warning: cast to smaller integer type
'enum fip_mode' from 'void *' [-Wvoid-pointer-to-enum-cast]
enum fip_mode fip_mode = (enum fip_mode)kp->arg;
^~~~~~~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20210415220826.29438-9-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fcoe/fcoe_ctlr.c:1314: warning: expecting prototype for fcoe_ctlr_recv_els(). Prototype was for fcoe_ctlr_recv_clr_vlink() instead
drivers/scsi/fcoe/fcoe_ctlr.c:2963: warning: expecting prototype for fcoe_ctlr_vlan_disk_reply(). Prototype was for fcoe_ctlr_vlan_disc_reply() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-6-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fcoe/fcoe.c:2782: warning: expecting prototype for fcoe_vport_set_symbolic_name(). Prototype was for fcoe_set_vport_symbolic_name() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-4-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, qla2xxx,
smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
cleanups, a major power management rework and a load of assorted minor
updates. There are a few core updates (formatting fixes being the big
one) but nothing major this cycle.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
hwhOv6Uto89gLCWSEz8=
=KUPT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
linux/netdevice.h is included in very many places, touching any
of its dependecies causes large incremental builds.
Drop the linux/ethtool.h include, linux/netdevice.h just needs
a forward declaration of struct ethtool_ops.
Fix all the places which made use of this implicit include.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed. The other main changes are two
driver updates (arcmsr, pm80xx) and assorted minor clean ups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX5MkQCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRkuAPsEAR/W
NS7J7j66rF2x15xGR2CNB4R6FEBSd/hdOPp7cQEA4rtLKKI53W4oydKsfTux6N6o
MLZJIHM5nTitk++AVQs=
=QgpC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed.
The other main changes are two driver updates (arcmsr, pm80xx) and
assorted minor clean ups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: qla2xxx: Fix return of uninitialized value in rval
scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands
scsi: sr: Initialize ->cmd_len
scsi: arcmsr: Update driver version to v1.50.00.02-20200819
scsi: arcmsr: Add support for ARC-1886 series RAID controllers
scsi: arcmsr: Fix device hot-plug monitoring timer stop
scsi: arcmsr: Remove unnecessary syntax
scsi: pm80xx: Driver version update
scsi: pm80xx: Increase the number of outstanding I/O supported to 1024
scsi: pm80xx: Remove DMA memory allocation for ccb and device structures
scsi: pm80xx: Increase number of supported queues
scsi: sym53c8xx_2: Fix sizeof() mismatch
scsi: isci: Fix a typo in a comment
scsi: qla4xxx: Fix inconsistent format argument type
scsi: myrb: Fix inconsistent format argument types
scsi: myrb: Remove redundant assignment to variable timeout
scsi: bfa: Fix error return in bfad_pci_init()
scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup()
scsi: snic: Simplify the return expression of svnic_cq_alloc()
scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc()
...
In fcoe_sysfs_fcf_del(), we first deleted the fcf from the list and then
freed it if ctlr_dev was not NULL. This was causing a memory leak.
Free the fcf even if ctlr_dev is NULL.
Link: https://lore.kernel.org/r/20200729081824.30996-3-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Santosh Vernekar <svernekar@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mainly due to misdocumentation or bitrotted descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fcoe/fcoe_transport.c:396: warning: Function parameter or member 'skb' not described in 'fcoe_check_wait_queue'
drivers/scsi/fcoe/fcoe_transport.c:447: warning: Function parameter or member 't' not described in 'fcoe_queue_timer'
drivers/scsi/fcoe/fcoe_transport.c:447: warning: Excess function parameter 'lport' description in 'fcoe_queue_timer'
drivers/scsi/fcoe/fcoe_transport.c:682: warning: Function parameter or member 'netdev' not described in 'fcoe_netdev_map_lookup'
Link: https://lore.kernel.org/r/20200713074645.126138-7-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mostly missing or incorrect (bitrotted) function parameters.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fcoe/fcoe_ctlr.c:139: warning: Function parameter or member 'mode' not described in 'fcoe_ctlr_init'
drivers/scsi/fcoe/fcoe_ctlr.c:604: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_encaps'
drivers/scsi/fcoe/fcoe_ctlr.c:1312: warning: Function parameter or member 'skb' not described in 'fcoe_ctlr_recv_clr_vlink'
drivers/scsi/fcoe/fcoe_ctlr.c:1312: warning: Excess function parameter 'fh' description in 'fcoe_ctlr_recv_clr_vlink'
drivers/scsi/fcoe/fcoe_ctlr.c:1781: warning: Function parameter or member 't' not described in 'fcoe_ctlr_timeout'
drivers/scsi/fcoe/fcoe_ctlr.c:1781: warning: Excess function parameter 'arg' description in 'fcoe_ctlr_timeout'
drivers/scsi/fcoe/fcoe_ctlr.c:1904: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_recv_flogi'
drivers/scsi/fcoe/fcoe_ctlr.c:2166: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop_locked'
drivers/scsi/fcoe/fcoe_ctlr.c:2166: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop_locked'
drivers/scsi/fcoe/fcoe_ctlr.c:2188: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop'
drivers/scsi/fcoe/fcoe_ctlr.c:2188: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop'
drivers/scsi/fcoe/fcoe_ctlr.c:2204: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop_final'
drivers/scsi/fcoe/fcoe_ctlr.c:2204: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop_final'
drivers/scsi/fcoe/fcoe_ctlr.c:2273: warning: Function parameter or member 'frport' not described in 'fcoe_ctlr_vn_parse'
drivers/scsi/fcoe/fcoe_ctlr.c:2273: warning: Excess function parameter 'rdata' description in 'fcoe_ctlr_vn_parse'
drivers/scsi/fcoe/fcoe_ctlr.c:2804: warning: Function parameter or member 'frport' not described in 'fcoe_ctlr_vlan_parse'
drivers/scsi/fcoe/fcoe_ctlr.c:2804: warning: Excess function parameter 'rdata' description in 'fcoe_ctlr_vlan_parse'
drivers/scsi/fcoe/fcoe_ctlr.c:2900: warning: Excess function parameter 'min_len' description in 'fcoe_ctlr_vlan_send'
drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Function parameter or member 'fip' not described in 'fcoe_ctlr_vlan_recv'
drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Function parameter or member 'skb' not described in 'fcoe_ctlr_vlan_recv'
drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Excess function parameter 'lport' description in 'fcoe_ctlr_vlan_recv'
drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Excess function parameter 'fp' description in 'fcoe_ctlr_vlan_recv'
drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Function parameter or member 'callback' not described in 'fcoe_ctlr_disc_start'
drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_start'
drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_start'
[mkp: fixed function name in comment]
Link: https://lore.kernel.org/r/20200713074645.126138-6-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A couple of headers make no attempt to document their associated function
parameters. Others looks as if they are suffering with a little bitrot.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fcoe/fcoe.c:654: warning: Function parameter or member 'lport' not described in 'fcoe_netdev_features_change'
drivers/scsi/fcoe/fcoe.c:654: warning: Function parameter or member 'netdev' not described in 'fcoe_netdev_features_change'
drivers/scsi/fcoe/fcoe.c:2039: warning: Function parameter or member 'ctlr_dev' not described in 'fcoe_ctlr_mode'
drivers/scsi/fcoe/fcoe.c:2039: warning: Excess function parameter 'cdev' description in 'fcoe_ctlr_mode'
drivers/scsi/fcoe/fcoe.c:2144: warning: Function parameter or member 'fcoe' not described in 'fcoe_dcb_create'
drivers/scsi/fcoe/fcoe.c:2144: warning: Excess function parameter 'netdev' description in 'fcoe_dcb_create'
drivers/scsi/fcoe/fcoe.c:2144: warning: Excess function parameter 'port' description in 'fcoe_dcb_create'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'lport' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'did' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'fp' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'op' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'resp' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'arg' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'timeout' not described in 'fcoe_elsct_send'
Link: https://lore.kernel.org/r/20200713074645.126138-5-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/fcoe/fcoe.c:1918:3-4: Unneeded semicolon
drivers/scsi/fcoe/fcoe.c:1930:3-4: Unneeded semicolon
Link: https://lore.kernel.org/r/20200421034008.27865-1-yanaijie@huawei.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi,
lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates.
The only core change this time around is the addition of request
batching for virtio. Since batching requires an additional flag to
use, it should be invisible to the rest of the drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXYQE/yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXs9AP4usPY5
OpMlF6OiKFNeJrCdhCScVghf9uHbc7UA6cP+EgD/bCtRgcDe1ZjOTYWdeTwvwWqA
ltWYonnv6Lg3b1f9yqI=
=jRC/
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi,
lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates. The
only core change this time around is the addition of request batching
for virtio. Since batching requires an additional flag to use, it
should be invisible to the rest of the drivers"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (264 commits)
scsi: hisi_sas: Fix the conflict between device gone and host reset
scsi: hisi_sas: Add BIST support for phy loopback
scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation
scsi: hisi_sas: Remove some unused function arguments
scsi: hisi_sas: Remove redundant work declaration
scsi: hisi_sas: Remove hisi_sas_hw.slot_complete
scsi: hisi_sas: Assign NCQ tag for all NCQ commands
scsi: hisi_sas: Update all the registers after suspend and resume
scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device
scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails
scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled
scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset()
scsi: hisi_sas: add debugfs auto-trigger for internal abort time out
scsi: virtio_scsi: unplug LUNs when events missed
scsi: scsi_dh_rdac: zero cdb in send_mode_select()
scsi: fcoe: fix null-ptr-deref Read in fc_release_transport
scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code
scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code
scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code
scsi: ufs: Use kmemdup in ufshcd_read_string_desc()
...
In fcoe_if_init, if fc_attach_transport(&fcoe_vport_fc_functions)
fails, need to free the previously memory and return fail, otherwise
will trigger null-ptr-deref Read in fc_release_transport.
fcoe_exit
fcoe_if_exit
fc_release_transport(fcoe_vport_scsi_transport)
Link: https://lore.kernel.org/r/1566279789-58207-1-git-send-email-zhengbin13@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pointer fh is being assigned a return value from the call to
skb_transport_header however this value is never read and fh is being
re-assigned immediately afterwards with a new value. Since there are
side-effects from calling skb_transport_header the call is redundant and
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use accessor functions for skb fragment's page_offset instead
of direct references, in preparation for bvec conversion.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using the generic 'fc_rport_priv' structure as argument and then
having to painstakingly outcast this to fcoe_rport we should be passing the
fcoe_rport structure itself and reduce complexity.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Gcc-9 complains for a memset across pointer boundaries, which happens as
the code tries to allocate a flexible array on the stack. Turns out we
cannot do this without relying on gcc-isms, so with this patch we'll embed
the fc_rport_priv structure into fcoe_rport, can use the normal
'container_of' outcast, and will only have to do a memset over one
structure.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
#define relative to FCOE CTLR start with FCOE_CTLR, except
FCOE_CTRL_SOL_TOV.
This is likely a typo and CTRL should be CTLR here as well.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for unifying the skb_frag and bio_vec, use the fine
accessors which already exist and use skb_frag_t instead of
struct skb_frag_struct.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 111 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1917d42d14 ("fcoe: use enum for fip_mode") introduces a separate
enum for the fip_mode that shall be used during initialisation handling
until it is passed to fcoe_ctrl_link_up to set the initial fip_state. That
change was incomplete and gcc quietly converted in various places between
the fip_mode and the fip_state enum values with implicit enum conversions,
which fortunately cannot cause any issues in the actual code's execution.
clang however warns about these implicit enum conversions in the scsi
drivers. This commit consolidates the use of the two enums, guided by
clang's enum-conversion warnings.
This commit now completes the use of the fip_mode: It expects and uses
fip_mode in {bnx2fc,fcoe}_interface_create and fcoe_ctlr_init, and it calls
fcoe_ctrl_set_set() with the correct values in fcoe_ctlr_link_up(). It
also breaks the association between FIP_MODE_AUTO and FIP_ST_AUTO to
indicate these two enums are distinct.
Link: https://github.com/ClangBuiltLinux/linux/issues/151
Fixes: 1917d42d14 ("fcoe: use enum for fip_mode")
Reported-by: Dmitry Golovin <dima@golovin.in>
Original-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
CC: Lukas Bulwahn <lukas.bulwahn@gmail.com>
CC: Nick Desaulniers <ndesaulniers@google.com>
CC: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There's no need to export fcoe_ctlr_destroy_store as a symbol, so remove
the EXPORT_SYMBOL() line for it.
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We are trying to get rid of BUS_ATTR() and the usage of that in the fcoe
driver can be trivially converted to use BUS_ATTR_WO(), so use that
instead.
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/fcoe/fcoe.c: In function 'fcoe_recv_frame':
drivers/scsi/fcoe/fcoe.c:1672:20: warning:
variable 'port' set but not used [-Wunused-but-set-variable]
drivers/scsi/fcoe/fcoe.c: In function 'fcoe_device_notification':
drivers/scsi/fcoe/fcoe.c:1861:20: warning:
variable 'port' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page. Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the
continuing absence of Nic we have target updates for tcmu and target
core (all with reviews and acks). The biggest observable change is
going to be that we're (again) trying to switch to mulitqueue as the
default (a user can still override the setting on the kernel command
line). Other major core stuff is the removal of the remaining
Microchannel drivers, an update of the internal timers and some
reworks of completion and result handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW3R3niYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishauRAP4yfBKK
dbxF81c/Bxi/Stk16FWkOOrjs4CizwmnMcpM5wD/UmM9o6ebDzaYpZgA8wIl7X/N
o/JckEZZpIp+5NySZNc=
=ggLB
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr.
In addition, with the continuing absence of Nic we have target updates
for tcmu and target core (all with reviews and acks).
The biggest observable change is going to be that we're (again) trying
to switch to mulitqueue as the default (a user can still override the
setting on the kernel command line).
Other major core stuff is the removal of the remaining Microchannel
drivers, an update of the internal timers and some reworks of
completion and result handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
scsi: ufs: remove unnecessary query(DM) UPIU trace
scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
scsi: aacraid: Spelling fix in comment
scsi: mpt3sas: Fix calltrace observed while running IO & reset
scsi: aic94xx: fix an error code in aic94xx_init()
scsi: st: remove redundant pointer STbuffer
scsi: qla2xxx: Update driver version to 10.00.00.08-k
scsi: qla2xxx: Migrate NVME N2N handling into state machine
scsi: qla2xxx: Save frame payload size from ICB
scsi: qla2xxx: Fix stalled relogin
scsi: qla2xxx: Fix race between switch cmd completion and timeout
scsi: qla2xxx: Fix Management Server NPort handle reservation logic
scsi: qla2xxx: Flush mailbox commands on chip reset
scsi: qla2xxx: Fix unintended Logout
scsi: qla2xxx: Fix session state stuck in Get Port DB
scsi: qla2xxx: Fix redundant fc_rport registration
scsi: qla2xxx: Silent erroneous message
scsi: qla2xxx: Prevent sysfs access when chip is down
scsi: qla2xxx: Add longer window for chip reset
...
KASAN reports a use-after-free in fcoe_ctlr_els_send() when we're sending a
LOGO and have FIP debugging enabled. This is because we're first freeing
the skb and then printing the frame's DID. But the DID is a member of the
FC frame header which in turn is the skb's payload.
Exchange the debug print and kfree_skb() calls so we're not touching the
freed data.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When calling either fc_rport_logon() or fc_rport_logoff() during rport list
traversal we cannot use the RCU list traversal, as either of these
functions will be taking a mutex. So we need to partially revert commit
a407c59339 to take the disc mutex during traversal. We should, however,
continue to use krefs to ensure that the rport object will not be freed
from under us.
Fixes: a407c59339 ("scsi: libfc: Fixup disc_mutex handling")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
updates.
There's no major behaviour change or additions to the core in all of
this, so the potential for regressions should be small (biggest
potential being in the scsi error handler changes).
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3O85
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
updates.
There's no major behaviour change or additions to the core in all of
this, so the potential for regressions should be small (biggest
potential being in the scsi error handler changes)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: lpfc: Fix hard lock up NMI in els timeout handling.
scsi: mpt3sas: remove a stray KERN_INFO
scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event()
scsi: aacraid: use timespec64 instead of timeval
scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions
scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
scsi: mpt3sas: fix dma_addr_t casts
scsi: be2iscsi: Use kasprintf
scsi: storvsc: Avoid excessive host scan on controller change
scsi: lpfc: fix kzalloc-simple.cocci warnings
scsi: mpt3sas: Update mpt3sas driver version.
scsi: mpt3sas: Fix sparse warnings
scsi: mpt3sas: Fix nvme drives checking for tlr.
scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info
scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives.
scsi: mpt3sas: scan and add nvme device after controller reset
scsi: mpt3sas: Set NVMe device queue depth as 128
scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.
scsi: mpt3sas: API's to remove nvme drive from sml
scsi: mpt3sas: API 's to support NVMe drive addition to SML
...
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: linux-scsi@vger.kernel.org
Cc: fcoe-devel@open-fcoe.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Lee Duncan
Chengfeng Ye
Chen Zhongjin
Yang Yingliang
Gustavo A. R. Silva
Kees Cook
Bart Van Assche
Lee Jones
Linus Torvalds
Jakub Kicinski
Tom Rix
Qinglang Miao
Javed Hasan
Miaohe Lin
Jason Yan
zhengbin
Colin Ian King
David S. Miller
Jonathan Lemon
Hannes Reinecke
Christophe JAILLET
Matthew Wilcox (Oracle)
Thomas Gleixner
Sedat Dilek
Greg Kroah-Hartman
YueHaibing
Christoph Hellwig
Johannes Thumshirn