Граф коммитов

449 Коммитов

Автор SHA1 Сообщение Дата
Vivek Goyal 70087dc38c blk-throttle: Use task_subsys_state() to determine a task's blkio_cgroup
Currentlly we first map the task to cgroup and then cgroup to
blkio_cgroup. There is a more direct way to get to blkio_cgroup
from task using task_subsys_state(). Use that.

The real reason for the fix is that it also avoids a race in generic
cgroup code. During remount/umount rebind_subsystems() is called and
it can do following with and rcu protection.

cgrp->subsys[i] = NULL;

That means if somebody got hold of cgroup under rcu and then it tried
to do cgroup->subsys[] to get to blkio_cgroup, it would get NULL which
is wrong. I was running into this race condition with ltp running on a
upstream derived kernel and that lead to crash.

So ideally we should also fix cgroup generic code to wait for rcu
grace period before setting pointer to NULL. Li Zefan is not very keen
on introducing synchronize_wait() as he thinks it will slow
down moun/remount/umount operations.

So for the time being atleast fix the kernel crash by taking a more
direct route to blkio_cgroup.

One tester had reported a crash while running LTP on a derived kernel
and with this fix crash is no more seen while the test has been
running for over 6 days.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-16 15:24:08 +02:00
Jens Axboe 5f45c69589 cfq-iosched: read_lock() does not always imply rcu_read_lock()
For some configurations of CONFIG_PREEMPT that is not true. So
get rid of __call_for_each_cic() and always uses the explicitly
rcu_read_lock() protected call_for_each_cic() instead.

This fixes a potential bug related to IO scheduler removal or
online switching.

Thanks to Paul McKenney for clarifying this.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 09:10:35 +02:00
Christoph Hellwig 24ecfbe27f block: add blk_run_queue_async
Instead of overloading __blk_run_queue to force an offload to kblockd
add a new blk_run_queue_async helper to do it explicitly.  I've kept
the blk_queue_stopped check for now, but I suspect it's not needed
as the check we do when the workqueue items runs should be enough.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 11:41:33 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Li, Shaohua c4ade94fc0 cfq-iosched: removing unnecessary think time checking
Removing think time checking. A high thinktime queue might means the queue
dispatches several requests and then do away. Limitting such queue seems
meaningless. And also this can simplify code. This is suggested by Vivek.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-23 08:30:34 +01:00
Justin TerAvest 62a37f6bad cfq-iosched: Don't clear queue stats when preempt.
For v2, I added back lines to cfq_preempt_queue() that were removed
during updates for accounting unaccounted_time. Thanks for pointing out
that I'd missed these, Vivek.

Previous commit "cfq-iosched: Don't set active queue in preempt" wrongly
cleared stats for preempting queues when it shouldn't have, because when
we choose a queue to preempt, it still isn't necessarily scheduled next.

Thanks to Vivek Goyal for figuring this out and understanding how the
preemption code works.

Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-23 08:25:44 +01:00
Justin TerAvest eda5e0c91f cfq-iosched: Don't set active queue in preempt
Commit "Add unaccounted time to timeslice_used" changed the behavior of
cfq_preempt_queue to set cfqq active. Vivek pointed out that other
preemption rules might get involved, so we shouldn't manually set which
queue is active.

This cleans up the code to just clear the queue stats at preemption
time.

Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-22 21:26:49 +01:00
Justin TerAvest 8184f93ece cfq-iosched: Don't update group weights when on service tree
Version 3 is updated to apply to for-2.6.39/core.

For version 2, I took Vivek's advice and made sure we update the group
weight from cfq_group_service_tree_add().

If a weight was updated while a group is on the service tree, the
calculation for the total weight of the service tree can be adjusted
improperly, which either leads to bad service tree weights, or
potentially crashes (if total_weight becomes 0).

This patch defers updates to the weight until a group is off the service
tree.

Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-17 16:12:36 +01:00
Justin TerAvest 167400d340 blk-cgroup: Add unaccounted time to timeslice_used.
There are two kind of times that tasks are not charged for: the first
seek and the extra time slice used over the allocated timeslice. Both
of these exported as a new unaccounted_time stat.

I think it would be good to have this reported in 'time' as well, but
that is probably a separate discussion.

Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-12 16:54:00 +01:00
Jens Axboe 4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Jens Axboe 7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Jens Axboe b873c5d692 Merge branch 'block-for-2.6.39-core' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tj/misc into for-2.6.39/core 2011-03-07 09:40:21 +01:00
Gui Jianfeng a60327107b cfq-iosched: Fix update_vdisktime logic
The update_vdisktime logic is broken since commit
b54ce60eb7, st->min_vdisktime never makes
a progress. Fix it.

Thanks Vivek for pointing it out.

Signed-off-by: Gui Jianfeng <guijianfen@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-07 09:28:09 +01:00
Shaohua Li ef8a41df8c cfq-iosched: give busy sync queue no dispatch limit
If there are a sync and an async queue and the sync queue's think time
is small, we can ignore the sync queue's dispatch quantum. Because the
sync queue will always preempt the async queue, we don't need to care
about async's latency.  This can fix a performance regression of
aiostress test, which is introduced by commit f8ae6e3eb8. The issue
should exist even without the commit, but the commit amplifies the
impact.

The initial post does the same optimization for RT queue too, but since
I have no real workload for it, Vivek suggests to drop it.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-07 09:26:29 +01:00
Jens Axboe 93803e0140 cfq-iosched: fix race in cfq_set_request()
We need to hold the queue lock over the reference increment,
it's not atomic anymore.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-07 08:59:06 +01:00
Tejun Heo e83a46bbb1 Merge branch 'for-linus' of ../linux-2.6-block into block-for-2.6.39/core
This merge creates two set of conflicts.  One is simple context
conflicts caused by removal of throtl_scheduled_delayed_work() in
for-linus and removal of throtl_shutdown_timer_wq() in
for-2.6.39/core.

The other is caused by commit 255bb490c8 (block: blk-flush shouldn't
call directly into q->request_fn() __blk_run_queue()) in for-linus
crashing with FLUSH reimplementation in for-2.6.39/core.  The conflict
isn't trivial but the resolution is straight-forward.

* __blk_run_queue() calls in flush_end_io() and flush_data_end_io()
  should be called with @force_kblockd set to %true.

* elv_insert() in blk_kick_flush() should use
  %ELEVATOR_INSERT_REQUEUE.

Both changes are to avoid invoking ->request_fn() directly from
request completion path and closely match the changes in the commit
255bb490c8.

Signed-off-by: Tejun Heo <tj@kernel.org>
2011-03-04 19:09:02 +01:00
Tejun Heo 1654e7411a block: add @force_kblockd to __blk_run_queue()
__blk_run_queue() automatically either calls q->request_fn() directly
or schedules kblockd depending on whether the function is recursed.
blk-flush implementation needs to be able to explicitly choose
kblockd.  Add @force_kblockd.

All the current users are converted to specify %false for the
parameter and this patch doesn't introduce any behavior change.

stable: This is prerequisite for fixing ide oops caused by the new
        blk-flush implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02 08:48:05 -05:00
Justin TerAvest 0bbfeb8320 cfq-iosched: Always provide group isolation.
Effectively, make group_isolation=1 the default and remove the tunable.
The setting group_isolation=0 was because by default we idle on
sync-noidle tree and on fast devices, this can be very harmful for
throughput.

However, this problem can also be addressed by tuning slice_idle and
possibly group_idle on faster storage devices.

This change simplifies the CFQ code by removing the feature entirely.

Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-01 15:05:08 -05:00
Jens Axboe 6fae9c2513 Merge commit 'v2.6.38-rc6' into for-2.6.39/core
Conflicts:
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-01 15:04:39 -05:00
Mike Snitzer c186794dbb block: share request flush fields with elevator_private
Flush requests are never put on the IO scheduler.  Convert request
structure's elevator_private* into an array and have the flush fields
share a union with it.

Reclaim the space lost in 'struct request' by moving 'completion_data'
back in the union with 'rb_node'.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-02-11 11:08:00 +01:00
Justin TerAvest 02a8f01b5a cfq-iosched: Don't wait if queue already has requests.
Commit 7667aa0630 added logic to wait for
the last queue of the group to become busy (have at least one request),
so that the group does not lose out for not being continuously
backlogged. The commit did not check for the condition that the last
queue already has some requests. As a result, if the queue already has
requests, wait_busy is set. Later on, cfq_select_queue() checks the
flag, and decides that since the queue has a request now and wait_busy
is set, the queue is expired.  This results in early expiration of the
queue.

This patch fixes the problem by adding a check to see if queue already
has requests. If it does, wait_busy is not set. As a result, time slices
do not expire early.

The queues with more than one request are usually buffered writers.
Testing shows improvement in isolation between buffered writers.

Cc: stable@kernel.org
Signed-off-by: Justin TerAvest <teravest@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-02-09 14:22:36 +01:00
Vivek Goyal ba5bd520f6 cfq: rename a function to give it more appropriate name
o Rename a function to give it more approprate name. We are calculating
  cfq queue slice and function name gives the impression as if cfq group
  slice length is being calculated.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-19 08:25:02 -07:00
Shaohua Li c553f8e335 block cfq: compensate preempted queue even if it has no slice assigned
If a queue is preempted before it gets slice assigned, the queue doesn't get
compensation, which looks unfair. For such queue, we compensate it for a whole
slice.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-14 08:41:03 +01:00
Shaohua Li f8ae6e3eb8 block cfq: make queue preempt work for queues from different workload
I got this:
             fio-874   [007]  2157.724514:   8,32   m   N cfq874 preempt
             fio-874   [007]  2157.724519:   8,32   m   N cfq830 slice expired t=1
             fio-874   [007]  2157.724520:   8,32   m   N cfq830 sl_used=1 disp=0 charge=1 iops=0 sect=0
             fio-874   [007]  2157.724521:   8,32   m   N cfq830 set_active wl_prio:0 wl_type:0
             fio-874   [007]  2157.724522:   8,32   m   N cfq830 Not idling. st->count:1

cfq830 is an async queue, and preempted by a sync queue cfq874. But since we
have cfqg->saved_workload_slice mechanism, the preempt is a nop.
Looks currently our preempt is totally broken if the two queues are not from
the same workload type.
Below patch fixes it. This will might make async queue starvation, but it's
what our old code does before cgroup is added.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-14 08:41:02 +01:00
Linus Torvalds 275220f0fc Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...
2011-01-13 10:45:01 -08:00
Shaohua Li 329a67815b block cfq: don't use atomic_t for cfq_group
cfq_group->ref is used with queue_lock hold, the only exception is
cfq_set_request, which looks like a bug to me, so ref doesn't need
to be an atomic and atomic operation is slower.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-07 08:48:28 +01:00
Shaohua Li 30d7b9448f block cfq: don't use atomic_t for cfq_queue
cfq_queue->ref is used with queue_lock hold, so ref doesn't need to be an atomic
and atomic operation is slower.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-07 08:46:59 +01:00
Gui Jianfeng 7278c9c19b cfq-iosched: don't check cfqg in choose_service_tree()
When cfq_choose_cfqg() is called in select_queue(), there must be at least one
backlogged CFQ queue waiting for dispatching, hence there must be at least one
backlogged CFQ group on service tree. So we never call choose_service_tree()
with cfqg == NULL.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:57:14 +01:00
Shaohua Li writes e4ea0c16a8 block cfq: select new workload if priority changed
If priority is changed, continuing to check workload_expires and service tree
count of the previous workload does not make sense. We should always choose
the workload with lowest key of new priority in such case.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-13 14:32:22 +01:00
Gui Jianfeng 760701bfe1 cfq-iosched: Get rid of on_st flag
It's able to check whether a CFQ group on a service tree by
checking "cfqg->rb_node". There's no need to maintain an
extra flag here.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-30 20:52:47 +01:00
Gui Jianfeng b54ce60eb7 cfq-iosched: Get rid of st->active
When a cfq group is running, it won't be dequeued from service tree, so
there's no need to store the active one in st->active. Just gid rid of it.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-30 20:52:46 +01:00
Jens Axboe a02056349c Merge branch 'v2.6.37-rc2' into for-2.6.38/core 2010-11-16 10:09:42 +01:00
Shaohua Li 2b9408a459 cfq-iosched: don't schedule a dispatch for a non-idle queue
Vivek suggests we don't need schedule a dispatch when an idle queue
becomes nonidle. And he is right, cfq_should_preempt already covers
the logic.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-09 14:51:13 +01:00
Shaohua Li 8e1ac66551 cfq-iosched: don't idle if a deep seek queue is slow
If a deep seek queue slowly deliver requests but disk is much faster, idle
for the queue just wastes disk throughput. If the queue delevers all requests
before half its slice is used, the patch disable idle for it.
In my test, application delivers 32 requests one time, the disk can accept
128 requests at maxium and disk is fast. without the patch, the throughput
is just around 30m/s, while with it, the speed is about 80m/s. The disk is
a SSD, but is detected as a rotational disk. I can configure it as SSD, but
I thought the deep seek queue logic should be fixed too, for example,
considering a fast raid.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 15:01:04 +01:00
Shaohua Li d2d59e18a1 cfq-iosched: schedule dispatch for noidle queue
A queue is idle at cfq_dispatch_requests(), but it gets noidle later. Unless
other task explictly does unplug or all requests are drained, we will not
deliever requests to the disk even cfq_arm_slice_timer doesn't make the
queue idle. For example, cfq_should_idle() returns true because of
service_tree->count == 1, and then other queues are added. Note, I didn't
see obvious performance impacts so far with the patch, but just thought
this could be a problem.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 15:01:03 +01:00
Shaohua Li c1e44756fd cfq-iosched: do cleanup
Some functions should return boolean.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 15:01:02 +01:00
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Linus Torvalds e9dd2b6837 Merge branch 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits)
  cfq-iosched: Fix a gcc 4.5 warning and put some comments
  block: Turn bvec_k{un,}map_irq() into static inline functions
  block: fix accounting bug on cross partition merges
  block: Make the integrity mapped property a bio flag
  block: Fix double free in blk_integrity_unregister
  block: Ensure physical block size is unsigned int
  blkio-throttle: Fix possible multiplication overflow in iops calculations
  blkio-throttle: limit max iops value to UINT_MAX
  blkio-throttle: There is no need to convert jiffies to milli seconds
  blkio-throttle: Fix link failure failure on i386
  blkio: Recalculate the throttled bio dispatch time upon throttle limit change
  blkio: Add root group to td->tg_list
  blkio: deletion of a cgroup was causes oops
  blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n
  block: set the bounce_pfn to the actual DMA limit rather than to max memory
  block: revert bad fix for memory hotplug causing bounces
  Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK
  block: set the bounce_pfn to the actual DMA limit rather than to max memory
  block: Prevent hang_check firing during long I/O
  cfq: improve fsync performance for small files
  ...

Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h
2010-10-22 17:00:32 -07:00
Vivek Goyal b4627321e1 cfq-iosched: Fix a gcc 4.5 warning and put some comments
- Andi encountedred following warning with gcc 4.5

  linux/block/cfq-iosched.c: In function ‘cfq_dispatch_requests’:
  linux/block/cfq-iosched.c:2156:3: warning: array subscript is above array
  bounds

- Warning happens due to following code.

  slice = group_slice * count /
		max_t(unsigned, cfqg->busy_queues_avg[cfqd->serving_prio],
		cfq_group_busy_queues_wl(cfqd->serving_prio, cfqd, cfqg));

  gcc is complaining about cfqg->busy_queues_avg[] being indexed by CFQ
  prio classes (RT, BE and IDLE) while the array size is only 2.

- At run time, we never access cfqg->busy_queues_avg[IDLE] and return from
  function before this code hits.

- To fix warning increase the array size though it will remain unused. This
  patch also puts some comments to clarify some of the confusions.

- I have taken Jens's patch and modified it a bit.

- Compile tested with gcc 4.4 and boot tested. I don't have gcc 4.5
  running, Andi can you please test it with gcc 4.5 to make sure it
  worked.

Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-22 09:48:43 +02:00
Vivek Goyal fe0714377e blkio: Recalculate the throttled bio dispatch time upon throttle limit change
o Currently any cgroup throttle limit changes are processed asynchronousy and
  the change does not take affect till a new bio is dispatched from same group.

o It might happen that a user sets a redicuously low limit on throttling.
  Say 1 bytes per second on reads. In such cases simple operations like mount
  a disk can wait for a very long time.

o Once bio is throttled, there is no easy way to come out of that wait even if
  user increases the read limit later.

o This patch fixes it. Now if a user changes the cgroup limits, we recalculate
  the bio dispatch time according to new limits.

o Can't take queueu lock under blkcg_lock, hence after the change I wake
  up the dispatch thread again which recalculates the time. So there are some
  variables being synchronized across two threads without lock and I had to
  make use of barriers. Hoping I have used barriers correctly. Any review of
  memory barrier code especially will help.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:49:49 +02:00
Vivek Goyal 180be2a042 cfq-iosched: fix a kernel OOPs when usb key is inserted
Mike reported a kernel crash when a usb key hotplug is performed while all
kernel thrads are not in a root cgroup and are running in one of the child
cgroups of blkio controller.

	BUG: unable to handle kernel NULL pointer dereference at 0000002c
	IP: [<c11c7b08>] cfq_get_queue+0x232/0x412
	*pde = 00000000
	Oops: 0000 [#1] PREEMPT
	last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/host3/scsi_host/host3/uevent

	[..]
	Pid: 30039, comm: scsi_scan_3 Not tainted 2.6.35.2-fg.roam #1 Volvi2                         /Aspire 4315
	EIP: 0060:[<c11c7b08>] EFLAGS: 00010086 CPU: 0
	EIP is at cfq_get_queue+0x232/0x412
	EAX: f705f9c0 EBX: e977abac ECX: 00000000 EDX: 00000000
	ESI: f00da400 EDI: f00da4ec EBP: e977a800 ESP: dff8fd00
	 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
	Process scsi_scan_3 (pid: 30039, ti=dff8e000 task=f6b6c9a0 task.ti=dff8e000)
	Stack:
	 00000000 00000000 00000001 01ff0000 f00da508 00000000 f00da524 f00da540
	<0> e7994940 dd631750 f705f9c0 e977a820 e977ac44 f00da4d0 00000001 f6b6c9a0
	<0> 00000010 00008010 0000000b 00000000 00000001 e977a800 dd76fac0 00000246
	Call Trace:
	 [<c11c7f10>] ? cfq_set_request+0x228/0x34c
	 [<c11c7ce8>] ? cfq_set_request+0x0/0x34c
	 [<c11bb3b9>] ? elv_set_request+0xf/0x1c
	 [<c11bdd51>] ? get_request+0x1ad/0x22f
	 [<c11bddf2>] ? get_request_wait+0x1f/0x11a
	 [<c11d013b>] ? kvasprintf+0x33/0x3b
	 [<c127b537>] ? scsi_execute+0x1d/0x103
	 [<c127b675>] ? scsi_execute_req+0x58/0x83
	 [<c127c391>] ? scsi_probe_and_add_lun+0x188/0x7c2
	 [<c12718c6>] ? attribute_container_add_device+0x15/0xfa
	 [<c11c95d1>] ? kobject_get+0xf/0x13
	 [<c126d1db>] ? get_device+0x10/0x14
	 [<c127be93>] ? scsi_alloc_target+0x217/0x24d
	 [<c127cbd8>] ? __scsi_scan_target+0x95/0x480
	 [<c10204eb>] ? dequeue_entity+0x14/0x1fe
	 [<c1020491>] ? update_curr+0x165/0x1ab
	 [<c1020491>] ? update_curr+0x165/0x1ab
	 [<c127d00d>] ? scsi_scan_channel+0x4a/0x76
	 [<c127d0b0>] ? scsi_scan_host_selected+0x77/0xad
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c127d137>] ? do_scsi_scan_host+0x51/0x56
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c127d14a>] ? do_scan_async+0xe/0x11a
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c10354c5>] ? kthread+0x5e/0x63
	 [<c1035467>] ? kthread+0x0/0x63
	 [<c1002af6>] ? kernel_thread_helper+0x6/0x10
	Code: 44 24 1c 54 83 44 24 18 54 83 fa 03 75 94 8b 06 c7 86 64 02 00 00 01 00 00 00 83 e0 03 09 f0 89 06 8b 44 24 28 8b 90 58 01 00 00 <8b> 42 2c 85 c0 75 03 8b 42 08 8d 54 24 48 52 8d 4c 24 50 51 68
	EIP: [<c11c7b08>] cfq_get_queue+0x232/0x412 SS:ESP 0068:dff8fd00
	CR2: 000000000000002c
	---[ end trace 9a88306573f69b12 ]---

The problem here is that we don't have bdi->dev information available when
thread does some IO.  Hence when dev_name() tries to access bdi->dev, it
crashes.

This problem does not happen if kernel threads are in root group as root
group is statically allocated at device initialization time and we don't
hit this piece of code.

Fix it by delaying the filling of major and minor number information of
device in blk_group.  Initially a blk_group is created with 0 as device
information and this information is filled later once some more IO comes
in from same group.

Reported-by: Mike Kazantsev <mk.fraggod@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-21 11:49:17 +02:00
Corrado Zoccolo 749ef9f842 cfq: improve fsync performance for small files
Fsync performance for small files achieved by cfq on high-end disks is
lower than what deadline can achieve, due to idling introduced between
the sync write happening in process context and the journal commit.

Moreover, when competing with a sequential reader, a process writing
small files and fsync-ing them is starved.

This patch fixes the two problems by:
- marking journal commits as WRITE_SYNC, so that they get the REQ_NOIDLE
  flag set,
- force all queues that have REQ_NOIDLE requests to be put in the noidle
  tree.

Having the queue associated to the fsync-ing process and the one associated
 to journal commits in the noidle tree allows:
- switching between them without idling,
- fairness vs. competing idling queues, since they will be serviced only
  after the noidle tree expires its slice.

Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-20 15:24:50 +02:00
Vivek Goyal 062a644d61 blk-cgroup: Prepare the base for supporting more than one IO control policies
o This patch prepares the base for introducing new IO control policies.
  Currently all the code is written knowing there is only one policy
  and that is proportional bandwidth. Creating infrastructure for newer
  policies to come in.

o Also there were many functions which were generated using macro. It was
  very confusing. Got rid of those.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:42:04 +02:00
Vivek Goyal c4e7893ebc cfq-iosched: blktrace print per slice sector stats
o Divyesh had gotten rid of this code in the past. I want to re-introduce it
  back as it helps me a lot during debugging.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 12:25:03 +02:00
Vivek Goyal 80bdf0c78f cfq-iosched: Implement tunable group_idle
o Implement a new tunable group_idle, which allows idling on the group
  instead of a cfq queue. Hence one can set slice_idle = 0 and not idle
  on the individual queues but idle on the group. This way on fast storage
  we can get fairness between groups at the same time overall throughput
  improves.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 12:24:26 +02:00
Vivek Goyal 02b35081fc cfq-iosched: Do group share accounting in IOPS when slice_idle=0
o Implement another CFQ mode where we charge group in terms of number
  of requests dispatched instead of measuring the time. Measuring in terms
  of time is not possible when we are driving deeper queue depths and there
  are requests from multiple cfq queues in the request queue.

o This mode currently gets activated if one sets slice_idle=0 and associated
  disk supports NCQ. Again the idea is that on an NCQ disk with idling disabled
  most of the queues will dispatch 1 or more requests and then cfq queue
  expiry happens and we don't have a way to measure time. So start providing
  fairness in terms of IOPS.

o Currently IOPS mode works only with cfq group scheduling. CFQ is following
  different scheduling algorithms for queue and group scheduling. These IOPS
  stats are used only for group scheduling hence in non-croup mode nothing
  should change.

o For CFQ group scheduling one can disable slice idling so that we don't idle
  on queue and drive deeper request queue depths (achieving better throughput),
  at the same time group idle is enabled so one should get service
  differentiation among groups.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 12:23:53 +02:00
Vivek Goyal b6508c1618 cfq-iosched: Do not idle if slice_idle=0
Do not idle either on cfq queue or service tree if slice_idle=0. User does
not want any queue or service tree idling. Currently even if slice_idle=0,
we were waiting for request to finish before expiring the queue and that
can lead to lower queue depths.

Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 12:23:33 +02:00
Christoph Hellwig 7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
Christoph Hellwig 33659ebbae block: remove wrappers for request type/flags
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:17:56 +02:00
Vivek Goyal e98ef89b30 cfq-iosched: Fixed boot warning with BLK_CGROUP=y and CFQ_GROUP_IOSCHED=n
Hi Jens,

Few days back Ingo noticed a CFQ boot time warning. This patch fixes it.
The issue here is that with CFQ_GROUP_IOSCHED=n, CFQ should not really
be making blkio stat related calls.

> Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With
> some
> configs i get bad spinlock warnings during bootup:
>
> [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750
> usecs
> [   28.972003] calling  b44_init+0x0/0x55 @ 1
> [   28.976009] bus: 'pci': add driver b44
> [   28.976374]  sda:
> [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
> [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, +.owner_cpu: 0
> [   28.980000] Pid: 117, comm: async/0 Not tainted +2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
> [   28.980000] Call Trace:
> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
> [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
> [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
> [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
> [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
> [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
> [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-18 19:57:47 +02:00
Jeff Moyer c10b61f091 cfq: Don't allow queue merges for queues that have no process references
Hi,

A user reported a kernel bug when running a particular program that did
the following:

created 32 threads
- each thread took a mutex, grabbed a global offset, added a buffer size
  to that offset, released the lock
- read from the given offset in the file
- created a new thread to do the same
- exited

The result is that cfq's close cooperator logic would trigger, as the
threads were issuing I/O within the mean seek distance of one another.
This workload managed to routinely trigger a use after free bug when
walking the list of merge candidates for a particular cfqq
(cfqq->new_cfqq).  The logic used for merging queues looks like this:

static void cfq_setup_merge(struct cfq_queue *cfqq, struct cfq_queue *new_cfqq)
{
	int process_refs, new_process_refs;
	struct cfq_queue *__cfqq;

	/* Avoid a circular list and skip interim queue merges */
	while ((__cfqq = new_cfqq->new_cfqq)) {
		if (__cfqq == cfqq)
			return;
		new_cfqq = __cfqq;
	}

	process_refs = cfqq_process_refs(cfqq);
	/*
	 * If the process for the cfqq has gone away, there is no
	 * sense in merging the queues.
	 */
	if (process_refs == 0)
		return;

	/*
	 * Merge in the direction of the lesser amount of work.
	 */
	new_process_refs = cfqq_process_refs(new_cfqq);
	if (new_process_refs >= process_refs) {
		cfqq->new_cfqq = new_cfqq;
		atomic_add(process_refs, &new_cfqq->ref);
	} else {
		new_cfqq->new_cfqq = cfqq;
		atomic_add(new_process_refs, &cfqq->ref);
	}
}

When a merge candidate is found, we add the process references for the
queue with less references to the queue with more.  The actual merging
of queues happens when a new request is issued for a given cfqq.  In the
case of the test program, it only does a single pread call to read in
1MB, so the actual merge never happens.

Normally, this is fine, as when the queue exits, we simply drop the
references we took on the other cfqqs in the merge chain:

	/*
	 * If this queue was scheduled to merge with another queue, be
	 * sure to drop the reference taken on that queue (and others in
	 * the merge chain).  See cfq_setup_merge and cfq_merge_cfqqs.
	 */
	__cfqq = cfqq->new_cfqq;
	while (__cfqq) {
		if (__cfqq == cfqq) {
			WARN(1, "cfqq->new_cfqq loop detected\n");
			break;
		}
		next = __cfqq->new_cfqq;
		cfq_put_queue(__cfqq);
		__cfqq = next;
	}

However, there is a hole in this logic.  Consider the following (and
keep in mind that each I/O keeps a reference to the cfqq):

q1->new_cfqq = q2   // q2 now has 2 process references
q3->new_cfqq = q2   // q2 now has 3 process references

// the process associated with q2 exits
// q2 now has 2 process references

// queue 1 exits, drops its reference on q2
// q2 now has 1 process reference

// q3 exits, so has 0 process references, and hence drops its references
// to q2, which leaves q2 also with 0 process references

q4 comes along and wants to merge with q3

q3->new_cfqq still points at q2!  We follow that link and end up at an
already freed cfqq.

So, the fix is to not follow a merge chain if the top-most queue does
not have a process reference, otherwise any queue in the chain could be
already freed.  I also changed the logic to disallow merging with a
queue that does not have any process references.  Previously, we did
this check for one of the merge candidates, but not the other.  That
doesn't really make sense.

Without the attached patch, my system would BUG within a couple of
seconds of running the reproducer program.  With the patch applied, my
system ran the program for over an hour without issues.

This addresses the following bugzilla:
    https://bugzilla.kernel.org/show_bug.cgi?id=16217

Thanks a ton to Phil Carns for providing the bug report and an excellent
reproducer.

[ Note for stable: this applies to 2.6.32/33/34 ].

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Phil Carns <carns@mcs.anl.gov>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-17 20:17:35 +02:00
Shaohua Li d02a2c077f cfq-iosched: fix an oops caused by slab leak
I got below oops when unloading cfq-iosched. Considering scenario:
queue A merge to B, C merge to D and B will be merged to D. Before B is merged
to D, we do split B. We should put B's reference for D.

[  807.768536] =============================================================================
[  807.768539] BUG cfq_queue: Objects remaining on kmem_cache_close()
[  807.768541] -----------------------------------------------------------------------------
[  807.768543]
[  807.768546] INFO: Slab 0xffffea0003e6b4e0 objects=26 used=1 fp=0xffff88011d584fd8 flags=0x200000000004082
[  807.768550] Pid: 5946, comm: rmmod Tainted: G        W   2.6.34-07097-gf4b87de-dirty #724
[  807.768552] Call Trace:
[  807.768560]  [<ffffffff81104e8d>] slab_err+0x8f/0x9d
[  807.768564]  [<ffffffff811059e1>] ? flush_cpu_slab+0x0/0x93
[  807.768569]  [<ffffffff8164be52>] ? add_preempt_count+0xe/0xca
[  807.768572]  [<ffffffff8164bd9c>] ? sub_preempt_count+0xe/0xb6
[  807.768577]  [<ffffffff81648871>] ? _raw_spin_unlock+0x15/0x30
[  807.768580]  [<ffffffff8164bd9c>] ? sub_preempt_count+0xe/0xb6
[  807.768584]  [<ffffffff811061bc>] list_slab_objects+0x9b/0x19f
[  807.768588]  [<ffffffff8164bf0a>] ? add_preempt_count+0xc6/0xca
[  807.768591]  [<ffffffff81109e27>] kmem_cache_destroy+0x13f/0x21d
[  807.768597]  [<ffffffffa000ff13>] cfq_slab_kill+0x1a/0x43 [cfq_iosched]
[  807.768601]  [<ffffffffa000ffcf>] cfq_exit+0x93/0x9e [cfq_iosched]
[  807.768606]  [<ffffffff810973a2>] sys_delete_module+0x1b1/0x219
[  807.768612]  [<ffffffff8102fb5b>] system_call_fastpath+0x16/0x1b
[  807.768618] INFO: Object 0xffff88011d584618 @offset=1560
[  807.768622] INFO: Allocated in cfq_get_queue+0x11e/0x274 [cfq_iosched] age=7173 cpu=1 pid=5496
[  807.768626] =============================================================================

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-25 10:17:26 +02:00
Konstantin Khlebnikov 80b15c7389 cfq-iosched: compact io_context radix_tree
Use small consequent indexes as radix tree keys instead of sparse cfqd address.

This change will reduce radix tree depth from 11 (6 for 32-bit hosts)
to 1 if host have <=64 disks under cfq control, or to 0 if there only one disk.
So, this patch save 10*560 bytes for each process (5*296 for 32-bit hosts)

For each cfqd allocate cic index from ida.
To unlink dead cic from tree without cfqd access store index into ->key.
(bit 0 -- dead mark, bits 1..30 -- index: ida produce id in range 0..2^31-1)

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-24 09:06:59 +02:00
Konstantin Khlebnikov bca4b914b5 cfq-iosched: remove dead_key from cfq_io_context
Remove ->dead_key field from cfq_io_context to shrink its size to 128 bytes.
(64 bytes for 32-bit hosts)

Use lower bit in ->key as dead-mark, instead of moving key to separate field.
After this for dead cfq_io_context we got cic->key != cfqd automatically.
Thus, io_context's last-hit cache should work without changing.

Now to check ->key for non-dead state compare it with cfqd,
instead of checking ->key for non-null value as it was before.

Plus remove obsolete race protection in cfq_cic_lookup.
This race gone after v2.6.24-1728-g4ac845a

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-24 09:06:59 +02:00
Jens Axboe ee9a3607fb Merge branch 'master' into for-2.6.35
Conflicts:
	fs/ext3/fsync.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 21:27:26 +02:00
Paul E. McKenney f1ac2502e1 block: remove all rcu head initializations
Remove all rcu head inits. We don't care about the RCU head state before passing
it to call_rcu() anyway. Only leave the "on_stack" variants so debugobjects can
keep track of objects on stack.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:01:02 +02:00
Vivek Goyal dcf097b247 blk-cgroup: Fix RCU correctness warning in cfq_init_queue()
It is necessary to be in an RCU read-side critical section when invoking
css_id(), so this patch adds one to blkiocg_add_blkio_group().  This is
actually a false positive, because this is called at initialization time
and hence always refers to the root cgroup, which cannot go away.

[  103.790505] ===================================================
[  103.790509] [ INFO: suspicious rcu_dereference_check() usage. ]
[  103.790511] ---------------------------------------------------
[  103.790514] kernel/cgroup.c:4432 invoked rcu_dereference_check() without protection!
[  103.790517]
[  103.790517] other info that might help us debug this:
[  103.790519]
[  103.790521]
[  103.790521] rcu_scheduler_active = 1, debug_locks = 1
[  103.790524] 4 locks held by bash/4422:
[  103.790526]  #0:  (&buffer->mutex){+.+.+.}, at: [<ffffffff8114befa>] sysfs_write_file+0x3c/0x144
[  103.790537]  #1:  (s_active#102){.+.+.+}, at: [<ffffffff8114bfa5>] sysfs_write_file+0xe7/0x144
[  103.790544]  #2:  (&q->sysfs_lock){+.+.+.}, at: [<ffffffff812263b1>] queue_attr_store+0x49/0x8f
[  103.790552]  #3:  (&(&blkcg->lock)->rlock){......}, at: [<ffffffff8122e4db>] blkiocg_add_blkio_group+0x2b/0xad
[  103.790560]
[  103.790561] stack backtrace:
[  103.790564] Pid: 4422, comm: bash Not tainted 2.6.34-rc4-blkio-second-crash #81
[  103.790567] Call Trace:
[  103.790572]  [<ffffffff81068f57>] lockdep_rcu_dereference+0x9d/0xa5
[  103.790577]  [<ffffffff8107fac1>] css_id+0x44/0x57
[  103.790581]  [<ffffffff8122e503>] blkiocg_add_blkio_group+0x53/0xad
[  103.790586]  [<ffffffff81231936>] cfq_init_queue+0x139/0x32c
[  103.790591]  [<ffffffff8121f2d0>] elv_iosched_store+0xbf/0x1bf
[  103.790595]  [<ffffffff812263d8>] queue_attr_store+0x70/0x8f
[  103.790599]  [<ffffffff8114bfa5>] ? sysfs_write_file+0xe7/0x144
[  103.790603]  [<ffffffff8114bfc6>] sysfs_write_file+0x108/0x144
[  103.790609]  [<ffffffff810f527f>] vfs_write+0xae/0x10b
[  103.790612]  [<ffffffff81069863>] ? trace_hardirqs_on_caller+0x10c/0x130
[  103.790616]  [<ffffffff810f539c>] sys_write+0x4a/0x6e
[  103.790622]  [<ffffffff81002b5b>] system_call_fastpath+0x16/0x1b
[  103.790625]

Located-by: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-06 08:54:00 +02:00
Dmitry Monakhov 50eaeb323a cfq-iosched: fix broken cfq_ref_get_cfqf() for CONFIG_BLK_CGROUP=y && CFQ_GROUP_IOSCHED=n
We should return the cfq_group for this case, not NULL.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28 19:51:38 +02:00
Vivek Goyal afc24d49c1 blk-cgroup: config options re-arrangement
This patch fixes few usability and configurability issues.

o All the cgroup based controller options are configurable from
  "Genral Setup/Control Group Support/" menu. blkio is the only exception.
  Hence make this option visible in above menu and make it configurable from
  there to bring it inline with rest of the cgroup based controllers.

o Get rid of CONFIG_DEBUG_CFQ_IOSCHED.

  This option currently does two things.

  - Enable printing of cgroup paths in blktrace
  - Enables CONFIG_DEBUG_BLK_CGROUP, which in turn displays additional stat
    files in cgroup.

  If we are using group scheduling, blktrace data is of not really much use
  if cgroup information is not present. To get this data, currently one has to
  also enable CONFIG_DEBUG_CFQ_IOSCHED, which in turn brings the overhead of
  all the additional debug stat files which is not desired.

  Hence, this patch moves printing of cgroup paths under
  CONFIG_CFQ_GROUP_IOSCHED.

  This allows us to get rid of CONFIG_DEBUG_CFQ_IOSCHED completely. Now all
  the debug stat files are controlled only by CONFIG_DEBUG_BLK_CGROUP which
  can be enabled through config menu.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Divyesh Shah <dpshah@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-26 19:27:56 +02:00
Vivek Goyal e5ff082e8a blkio: Fix another BUG_ON() crash due to cfqq movement across groups
o Once in a while, I was hitting a BUG_ON() in blkio code. empty_time was
  assuming that upon slice expiry, group can't be marked empty already (except
  forced dispatch).

  But this assumption is broken if cfqq can move (group_isolation=0) across
  groups after receiving a request.

  I think most likely in this case we got a request in a cfqq and accounted
  the rq in one group, later while adding the cfqq to tree, we moved the queue
  to a different group which was already marked empty and after dispatch from
  slice we found group already marked empty and raised alarm.

  This patch does not error out if group is already marked empty. This can
  introduce some empty_time stat error only in case of group_isolation=0. This
  is better than crashing. In case of group_isolation=1 we should still get
  same stats as before this patch.

[  222.308546] ------------[ cut here ]------------
[  222.309311] kernel BUG at block/blk-cgroup.c:236!
[  222.309311] invalid opcode: 0000 [#1] SMP
[  222.309311] last sysfs file: /sys/devices/virtual/block/dm-3/queue/scheduler
[  222.309311] CPU 1
[  222.309311] Modules linked in: dm_round_robin dm_multipath qla2xxx scsi_transport_fc dm_zero dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
[  222.309311]
[  222.309311] Pid: 4780, comm: fio Not tainted 2.6.34-rc4-blkio-config #68 0A98h/HP xw8600 Workstation
[  222.309311] RIP: 0010:[<ffffffff8121ad88>]  [<ffffffff8121ad88>] blkiocg_set_start_empty_time+0x50/0x83
[  222.309311] RSP: 0018:ffff8800ba6e79f8  EFLAGS: 00010002
[  222.309311] RAX: 0000000000000082 RBX: ffff8800a13b7990 RCX: ffff8800a13b7808
[  222.309311] RDX: 0000000000002121 RSI: 0000000000000082 RDI: ffff8800a13b7a30
[  222.309311] RBP: ffff8800ba6e7a18 R08: 0000000000000000 R09: 0000000000000001
[  222.309311] R10: 000000000002f8c8 R11: ffff8800ba6e7ad8 R12: ffff8800a13b78ff
[  222.309311] R13: ffff8800a13b7990 R14: 0000000000000001 R15: ffff8800a13b7808
[  222.309311] FS:  00007f3beec476f0(0000) GS:ffff880001e40000(0000) knlGS:0000000000000000
[  222.309311] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  222.309311] CR2: 000000000040e7f0 CR3: 00000000a12d5000 CR4: 00000000000006e0
[  222.309311] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  222.309311] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  222.309311] Process fio (pid: 4780, threadinfo ffff8800ba6e6000, task ffff8800b3d6bf00)
[  222.309311] Stack:
[  222.309311]  0000000000000001 ffff8800bab17a48 ffff8800bab17a48 ffff8800a13b7800
[  222.309311] <0> ffff8800ba6e7a68 ffffffff8121da35 ffff880000000001 00ff8800ba5c5698
[  222.309311] <0> ffff8800ba6e7a68 ffff8800a13b7800 0000000000000000 ffff8800bab17a48
[  222.309311] Call Trace:
[  222.309311]  [<ffffffff8121da35>] __cfq_slice_expired+0x2af/0x3ec
[  222.309311]  [<ffffffff8121fd7b>] cfq_dispatch_requests+0x2c8/0x8e8
[  222.309311]  [<ffffffff8120f1cd>] ? spin_unlock_irqrestore+0xe/0x10
[  222.309311]  [<ffffffff8120fb1a>] ? blk_insert_cloned_request+0x70/0x7b
[  222.309311]  [<ffffffff81210461>] blk_peek_request+0x191/0x1a7
[  222.309311]  [<ffffffffa0002799>] dm_request_fn+0x38/0x14c [dm_mod]
[  222.309311]  [<ffffffff810ae61f>] ? sync_page_killable+0x0/0x35
[  222.309311]  [<ffffffff81210fd4>] __generic_unplug_device+0x32/0x37
[  222.309311]  [<ffffffff81211274>] generic_unplug_device+0x2e/0x3c
[  222.309311]  [<ffffffffa00011a6>] dm_unplug_all+0x42/0x5b [dm_mod]
[  222.309311]  [<ffffffff8120ca37>] blk_unplug+0x29/0x2d
[  222.309311]  [<ffffffff8120ca4d>] blk_backing_dev_unplug+0x12/0x14
[  222.309311]  [<ffffffff81109a7a>] block_sync_page+0x35/0x39
[  222.309311]  [<ffffffff810ae616>] sync_page+0x41/0x4a
[  222.309311]  [<ffffffff810ae62d>] sync_page_killable+0xe/0x35
[  222.309311]  [<ffffffff8158aa59>] __wait_on_bit_lock+0x46/0x8f
[  222.309311]  [<ffffffff810ae4f5>] __lock_page_killable+0x66/0x6d
[  222.309311]  [<ffffffff81056f9c>] ? wake_bit_function+0x0/0x33
[  222.309311]  [<ffffffff810ae528>] lock_page_killable+0x2c/0x2e
[  222.309311]  [<ffffffff810afbc5>] generic_file_aio_read+0x361/0x4f0
[  222.309311]  [<ffffffff810ea044>] do_sync_read+0xcb/0x108
[  222.309311]  [<ffffffff811e42f7>] ? security_file_permission+0x16/0x18
[  222.309311]  [<ffffffff810ea6ab>] vfs_read+0xab/0x108
[  222.309311]  [<ffffffff810ea7c8>] sys_read+0x4a/0x6e
[  222.309311]  [<ffffffff81002b5b>] system_call_fastpath+0x16/0x1b
[  222.309311] Code: 58 01 00 00 00 48 89 c6 75 0a 48 83 bb 60 01 00 00 00 74 09 48 8d bb a0 00 00 00 eb 35 41 fe cc 74 0d f6 83 c0 01 00 00 04 74 04 <0f> 0b eb fe 48 89 75 e8 e8 be e0 de ff 66 83 8b c0 01 00 00 04
[  222.309311] RIP  [<ffffffff8121ad88>] blkiocg_set_start_empty_time+0x50/0x83
[  222.309311]  RSP <ffff8800ba6e79f8>
[  222.309311] ---[ end trace 32b4f71dffc15712 ]---

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-26 19:25:11 +02:00
Vivek Goyal 7f1dc8a2d2 blkio: Fix blkio crash during rq stat update
blkio + cfq was crashing even when two sequential readers were put in two
separate cgroups (group_isolation=0).

The reason being that cfqq can migrate across groups based on its being
sync-noidle or not, it can happen that at request insertion time, cfqq
belonged to one cfqg and at request dispatch time, it belonged to root
group. In this case request stats per cgroup can go wrong and it also runs
into BUG_ON().

This patch implements rq stashing away a cfq group pointer and not relying
on cfqq->cfqg pointer alone for rq stat accounting.

[   65.163523] ------------[ cut here ]------------
[   65.164301] kernel BUG at block/blk-cgroup.c:117!
[   65.164301] invalid opcode: 0000 [#1] SMP
[   65.164301] last sysfs file: /sys/devices/pci0000:00/0000:00:05.0/0000:60:00.1/host9/rport-9:0-0/target9:0:0/9:0:0:2/block/sde/stat
[   65.164301] CPU 1
[   65.164301] Modules linked in: dm_round_robin dm_multipath qla2xxx scsi_transport_fc dm_zero dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
[   65.164301]
[   65.164301] Pid: 4505, comm: fio Not tainted 2.6.34-rc4-blk-for-35 #34 0A98h/HP xw8600 Workstation
[   65.164301] RIP: 0010:[<ffffffff8121924f>]  [<ffffffff8121924f>] blkiocg_update_io_remove_stats+0x5b/0xaf
[   65.164301] RSP: 0018:ffff8800ba5a79e8  EFLAGS: 00010046
[   65.164301] RAX: 0000000000000096 RBX: ffff8800bb268d60 RCX: 0000000000000000
[   65.164301] RDX: ffff8800bb268eb8 RSI: 0000000000000000 RDI: ffff8800bb268e00
[   65.164301] RBP: ffff8800ba5a7a08 R08: 0000000000000064 R09: 0000000000000001
[   65.164301] R10: 0000000000079640 R11: ffff8800a0bd5bf0 R12: ffff8800bab4af01
[   65.164301] R13: ffff8800bab4af00 R14: ffff8800bb1d8928 R15: 0000000000000000
[   65.164301] FS:  00007f18f75056f0(0000) GS:ffff880001e40000(0000) knlGS:0000000000000000
[   65.164301] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   65.164301] CR2: 000000000040e7f0 CR3: 00000000ba52b000 CR4: 00000000000006e0
[   65.164301] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   65.164301] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   65.164301] Process fio (pid: 4505, threadinfo ffff8800ba5a6000, task ffff8800ba45ae80)
[   65.164301] Stack:
[   65.164301]  ffff8800ba5a7a08 ffff8800ba722540 ffff8800bab4af68 ffff8800bab4af68
[   65.164301] <0> ffff8800ba5a7a38 ffffffff8121d814 ffff8800ba722540 ffff8800bab4af68
[   65.164301] <0> ffff8800ba722540 ffff8800a08f6800 ffff8800ba5a7a68 ffffffff8121d8ca
[   65.164301] Call Trace:
[   65.164301]  [<ffffffff8121d814>] cfq_remove_request+0xe4/0x116
[   65.164301]  [<ffffffff8121d8ca>] cfq_dispatch_insert+0x84/0xe1
[   65.164301]  [<ffffffff8121e833>] cfq_dispatch_requests+0x767/0x8e8
[   65.164301]  [<ffffffff8120e524>] ? submit_bio+0xc3/0xcc
[   65.164301]  [<ffffffff810ad657>] ? sync_page_killable+0x0/0x35
[   65.164301]  [<ffffffff8120ea8d>] blk_peek_request+0x191/0x1a7
[   65.164301]  [<ffffffffa000109c>] ? dm_get_live_table+0x44/0x4f [dm_mod]
[   65.164301]  [<ffffffffa0002799>] dm_request_fn+0x38/0x14c [dm_mod]
[   65.164301]  [<ffffffff810ad657>] ? sync_page_killable+0x0/0x35
[   65.164301]  [<ffffffff8120f600>] __generic_unplug_device+0x32/0x37
[   65.164301]  [<ffffffff8120f8a0>] generic_unplug_device+0x2e/0x3c
[   65.164301]  [<ffffffffa00011a6>] dm_unplug_all+0x42/0x5b [dm_mod]
[   65.164301]  [<ffffffff8120b063>] blk_unplug+0x29/0x2d
[   65.164301]  [<ffffffff8120b079>] blk_backing_dev_unplug+0x12/0x14
[   65.164301]  [<ffffffff81108a82>] block_sync_page+0x35/0x39
[   65.164301]  [<ffffffff810ad64e>] sync_page+0x41/0x4a
[   65.164301]  [<ffffffff810ad665>] sync_page_killable+0xe/0x35
[   65.164301]  [<ffffffff81589027>] __wait_on_bit_lock+0x46/0x8f
[   65.164301]  [<ffffffff810ad52d>] __lock_page_killable+0x66/0x6d
[   65.164301]  [<ffffffff81055fd4>] ? wake_bit_function+0x0/0x33
[   65.164301]  [<ffffffff810ad560>] lock_page_killable+0x2c/0x2e
[   65.164301]  [<ffffffff810aebfd>] generic_file_aio_read+0x361/0x4f0
[   65.164301]  [<ffffffff810e906c>] do_sync_read+0xcb/0x108
[   65.164301]  [<ffffffff811e32a3>] ? security_file_permission+0x16/0x18
[   65.164301]  [<ffffffff810e96d3>] vfs_read+0xab/0x108
[   65.164301]  [<ffffffff810e97f0>] sys_read+0x4a/0x6e
[   65.164301]  [<ffffffff81002b5b>] system_call_fastpath+0x16/0x1b
[   65.164301] Code: 00 74 1c 48 8b 8b 60 01 00 00 48 85 c9 75 04 0f 0b eb fe 48 ff c9 48 89 8b 60 01 00 00 eb 1a 48 8b 8b 58 01 00 00 48 85 c9 75 04 <0f> 0b eb fe 48 ff c9 48 89 8b 58 01 00 00 45 84 e4 74 16 48 8b
[   65.164301] RIP  [<ffffffff8121924f>] blkiocg_update_io_remove_stats+0x5b/0xaf
[   65.164301]  RSP <ffff8800ba5a79e8>
[   65.164301] ---[ end trace 1b2b828753032e68 ]---

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-21 17:44:16 +02:00
Divyesh Shah 8d2a91f896 blkio: Initialize blkg->stats_lock for the root cfqg too
This fixes the lockdep warning reported by Gui Jianfeng.

Signed-off-by: Divyesh Shah <dpshah@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-16 08:10:51 +02:00
Divyesh Shah 28baf44299 blkio: Fix compile errors
Fixes compile errors in blk-cgroup code for empty_time stat and a merge fix in
CFQ. The first error was when CONFIG_DEBUG_CFQ_IOSCHED is not set.

Signed-off-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-14 11:22:38 +02:00
Jens Axboe 4facdaec1c Merge branch 'master' into for-2.6.35
Conflicts:
	block/blk-cgroup.c
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-13 20:03:21 +02:00
Divyesh Shah a11cdaa7af block: Update to io-controller stats
Changelog from v1:
o Call blkiocg_update_idle_time_stats() at cfq_rq_enqueued() instead of at
  dispatch time.

Changelog from original patchset: (in response to Vivek Goyal's comments)
o group blkiocg_update_blkio_group_dequeue_stats() with other DEBUG functions
o rename blkiocg_update_set_active_queue_stats() to
  blkiocg_update_avg_queue_size_stats()
o s/request/io/ in blkiocg_update_request_add_stats() and
  blkiocg_update_request_remove_stats()
o Call cfq_del_timer() at request dispatch() instead of
  blkiocg_update_idle_time_stats()

Signed-off-by: Divyesh Shah<dpshah@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-13 19:59:17 +02:00
Gui Jianfeng 34d0f179d6 io-controller: Add a new interface "weight_device" for IO-Controller
Currently, IO Controller makes use of blkio.weight to assign weight for
all devices. Here a new user interface "blkio.weight_device" is introduced to
assign different weights for different devices. blkio.weight becomes the
default value for devices which are not configured by "blkio.weight_device"

You can use the following format to assigned specific weight for a given
device:
#echo "major:minor weight" > blkio.weight_device

major:minor represents device number.

And you can remove weight for a given device as following:
#echo "major:minor 0" > blkio.weight_device

V1->V2 changes:
- use user interface "weight_device" instead of "policy" suggested by Vivek
- rename some struct suggested by Vivek
- rebase to 2.6-block "for-linus" branch
- remove an useless list_empty check pointed out by Li Zefan
- some trivial typo fix

V2->V3 changes:
- Move policy_*_node() functions up to get rid of forward declarations
- rename related functions by adding prefix "blkio_"

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-13 10:14:20 +02:00
Linus Torvalds 2f4084209a Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits)
  cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch
  loop: Update mtime when writing using aops
  block: expose the statistics in blkio.time and blkio.sectors for the root cgroup
  backing-dev: Handle class_create() failure
  Block: Fix block/elevator.c elevator_get() off-by-one error
  drbd: lc_element_by_index() never returns NULL
  cciss: unlock on error path
  cfq-iosched: Do not merge queues of BE and IDLE classes
  cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging
  i2o: Remove the dangerous kobj_to_i2o_device macro
  block: remove 16 bytes of padding from struct request on 64bits
  cfq-iosched: fix a kbuild regression
  block: make CONFIG_BLK_CGROUP visible
  Remove GENHD_FL_DRIVERFS
  block: Export max number of segments and max segment size in sysfs
  block: Finalize conversion of block limits functions
  block: Fix overrun in lcm() and move it to lib
  vfs: improve writeback_inodes_wb()
  paride: fix off-by-one test
  drbd: fix al-to-on-disk-bitmap for 4k logical_block_size
  ...
2010-04-09 11:50:29 -07:00
Divyesh Shah 3440c49f5c cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch
When CFQ dispatches requests forcefully due to a barrier or changing iosched,
it runs through all cfqq's dispatching requests and then expires each queue.
However, it does not activate a cfqq before flushing its IOs resulting in
using stale values for computing slice_used.
This patch fixes it by calling activate queue before flushing reuqests from
each queue.

This is useful mostly for barrier requests because when the iosched is changing
it really doesnt matter if we have incorrect accounting since we're going to
break down all structures anyway.

We also now expire the current timeslice before moving on with the dispatch
to accurately account slice used for that cfqq.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 09:29:57 +02:00
Divyesh Shah 812df48d12 blkio: Add more debug-only per-cgroup stats
1) group_wait_time - This is the amount of time the cgroup had to wait to get a
  timeslice for one of its queues from when it became busy, i.e., went from 0
  to 1 request queued. This is different from the io_wait_time which is the
  cumulative total of the amount of time spent by each IO in that cgroup waiting
  in the scheduler queue. This stat is a great way to find out any jobs in the
  fleet that are being starved or waiting for longer than what is expected (due
  to an IO controller bug or any other issue).
2) empty_time - This is the amount of time a cgroup spends w/o any pending
   requests. This stat is useful when a job does not seem to be able to use its
   assigned disk share by helping check if that is happening due to an IO
   controller bug or because the job is not submitting enough IOs.
3) idle_time - This is the amount of time spent by the IO scheduler idling
   for a given cgroup in anticipation of a better request than the exising ones
   from other queues/cgroups.

All these stats are recorded using start and stop events. When reading these
stats, we do not add the delta between the current time and the last start time
if we're between the start and stop events. We avoid doing this to make sure
that these numbers are always monotonically increasing when read. Since we're
using sched_clock() which may use the tsc as its source, it may induce some
inconsistency (due to tsc resync across cpus) if we included the current delta.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 08:36:08 +02:00
Divyesh Shah cdc1184cf4 blkio: Add io_queued and avg_queue_size stats
These stats are useful for getting a feel for the queue depth of the cgroup,
i.e., how filled up its queues are at a given instant and over the existence of
the cgroup. This ability is useful when debugging problems in the wild as it
helps understand the application's IO pattern w/o having to read through the
userspace code (coz its tedious or just not available) or w/o the ability
to run blktrace (since you may not have root access and/or not want to disturb
performance).

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 08:36:08 +02:00
Divyesh Shah 812d402648 blkio: Add io_merged stat
This includes both the number of bios merged into requests belonging to this
cgroup as well as the number of requests merged together.
In the past, we've observed different merging behavior across upstream kernels,
some by design some actual bugs. This stat helps a lot in debugging such
problems when applications report decreased throughput with a new kernel
version.

This needed adding an extra elevator function to capture bios being merged as I
did not want to pollute elevator code with blkiocg knowledge and hence needed
the accounting invocation to come from CFQ.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 08:36:07 +02:00
Divyesh Shah 84c124da9f blkio: Changes to IO controller additional stats patches
that include some minor fixes and addresses all comments.

Changelog: (most based on Vivek Goyal's comments)
o renamed blkiocg_reset_write to blkiocg_reset_stats
o more clarification in the documentation on io_service_time and io_wait_time
o Initialize blkg->stats_lock
o rename io_add_stat to blkio_add_stat and declare it static
o use bool for direction and sync
o derive direction and sync info from existing rq methods
o use 12 for major:minor string length
o define io_service_time better to cover the NCQ case
o add a separate reset_stats interface
o make the indexed stats a 2d array to simplify macro and function pointer code
o blkio.time now exports in jiffies as before
o Added stats description in patch description and
  Documentation/cgroup/blkio-controller.txt
o Prefix all stats functions with blkio and make them static as applicable
o replace IO_TYPE_MAX with IO_TYPE_TOTAL
o Moved #define constant to top of blk-cgroup.c
o Pass dev_t around instead of char *
o Add note to documentation file about resetting stats
o use BLK_CGROUP_MODULE in addition to BLK_CGROUP config option in #ifdef
  statements
o Avoid struct request specific knowledge in blk-cgroup. blk-cgroup.h now has
  rq_direction() and rq_sync() functions which are used by CFQ and when using
  io-controller at a higher level, bio_* functions can be added.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 08:31:19 +02:00
Ricky Benitez a74b2adae0 block: expose the statistics in blkio.time and blkio.sectors for the root cgroup
Currently, the io statistics for the root cgroup are maintained, but
they are not shown because the device information is not available at
the point that the root blkio cgroup is created. This patch updates
the device information when the statistics are updated so that the
statistics become visible.

Signed-off-by: Ricky Benitez <rickyb@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-05 18:22:17 +02:00
Divyesh Shah 9195291e5f blkio: Increment the blkio cgroup stats for real now
We also add start_time_ns and io_start_time_ns fields to struct request
here to record the time when a request is created and when it is
dispatched to device. We use ns uints here as ms and jiffies are
not very useful for non-rotational media.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-02 08:44:37 +02:00
Divyesh Shah 303a3acb23 blkio: Add io controller stats like
- io_service_time
- io_wait_time
- io_serviced
- io_service_bytes

These stats are accumulated per operation type helping us to distinguish between
read and write, and sync and async IO. This patch does not increment any of
these stats.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-02 08:44:36 +02:00
Divyesh Shah 9a0785b0da blkio: Remove per-cfqq nr_sectors as we'll be passing
that info at request dispatch with other stats now. This patch removes the
existing support for accounting sectors for a blkio_group. This will be added
back differently in the next two patches.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-02 08:44:36 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Divyesh Shah 39c01b219f cfq-iosched: Do not merge queues of BE and IDLE classes
Even if they are found to be co-operating.

The prio_trees do not have any IDLE cfqqs on them. cfq_close_cooperator()
is called from cfq_select_queue() and cfq_completed_request(). The latter
ensures that the close cooperator code does not get invoked if the current
cfqq is of class IDLE but the former doesn't seem to have any such checks.
So an IDLE cfqq may get merged with a BE cfqq from the same group which
should be avoided.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-25 15:46:38 +01:00
Divyesh Shah b1ffe737f5 cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging
These have helped us debug some issues we've noticed in earlier IO
controller versions and should be useful now as well. The extra logging
covers:
- idling behavior. Since there are so many conditions based on which we decide
to idle or not, this patch adds a log message for some conditions that we've
found useful.
- workload slices and current prio and workload type

Changelog from v1:
o moved log message from cfq_set_active_queue() to __cfq_set_active_queue()
o changed queue_count to st->count

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-25 15:45:03 +01:00
Shaohua Li e9ce335df5 cfq-iosched: fix a kbuild regression
Alex Shi reported a kbuild regression which is about 10% performance lost.
He bisected to this commit: 3dde36ddea.
The reason is cfqq_close() can't find close cooperator. Restoring
cfq_rq_close()'s threshold to original value makes the regression go away.

Since for_preempt parameter isn't used anymore, this patch deletes it.

Reported-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-19 08:03:04 +01:00
Richard Kennedy 73e9ffdd0c cfq: remove 8 bytes of padding from cfq_rb_root on 64 bit builds
Reorder cfq_rb_root to remove 8 bytes of padding on 64 bit builds.

Consequently removing 56 bytes from cfq_group and 64 bytes from
cfq_data.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-01 10:50:20 +01:00
Shaohua Li abc3c744d0 cfq-iosched: quantum check tweak
Currently a queue can only dispatch up to 4 requests if there are other queues.
This isn't optimal, device can handle more requests, for example, AHCI can
handle 31 requests. I can understand the limit is for fairness, but we could
do a tweak: if the queue still has a lot of slice left, sounds we could
ignore the limit. Test shows this boost my workload (two thread randread of
a SSD) from 78m/s to 100m/s.
Thanks for suggestions from Corrado and Vivek for the patch.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-01 09:20:54 +01:00
Corrado Zoccolo 53c583d226 cfq-iosched: requests "in flight" vs "in driver" clarification
Counters for requests "in flight" and "in driver" are used asymmetrically
in cfq_may_dispatch, and have slightly different meaning.
We split the rq_in_flight counter (was sync_flight) to count both sync
and async requests, in order to use this one, which is more accurate in
some corner cases.
The rq_in_driver counter is coalesced, since individual sync/async counts
are not used any more.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-28 19:45:05 +01:00
Corrado Zoccolo 41647e7a91 cfq-iosched: rethink seeky detection for SSDs
CFQ currently applies the same logic of detecting seeky queues and
grouping them together for rotational disks as well as SSDs.
For SSDs, the time to complete a request doesn't depend on the
request location, but only on the size.
This patch therefore changes the criterion to group queues by
request size in case of SSDs, in order to achieve better fairness.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-28 19:41:25 +01:00
Corrado Zoccolo 3dde36ddea cfq-iosched: rework seeky detection
Current seeky detection is based on average seek lenght.
This is suboptimal, since the average will not distinguish between:
* a process doing medium sized seeks
* a process doing some sequential requests interleaved with larger seeks
and even a medium seek can take lot of time, if the requested sector
happens to be behind the disk head in the rotation (50% probability).

Therefore, we change the seeky queue detection to work as follows:
* each request can be classified as sequential if it is very close to
  the current head position, i.e. it is likely in the disk cache (disks
  usually read more data than requested, and put it in cache for
  subsequent reads). Otherwise, the request is classified as seeky.
* an history window of the last 32 requests is kept, storing the
  classification result.
* A queue is marked as seeky if more than 1/8 of the last 32 requests
  were seeky.

This patch fixes a regression reported by Yanmin, on mmap 64k random
reads.

Reported-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-28 19:41:25 +01:00
Gui Jianfeng 024f906616 cfq: Remove useless css reference get
There's no need to take css reference here, for the caller
has already called rcu_read_lock() to prevent cgroup from
being removed.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26 08:56:15 +01:00
Richard Kennedy c4081ba5c9 cfq: reorder cfq_queue removing padding on 64bit
This removes 8 bytes of padding from struct cfq_queue on 64 bit builds,
shrinking it's size to 256 bytes, so fitting into 1 fewer cachelines and
allowing 1 more object/slab in it's kmem_cache.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
----
patch against 2.6.33-rc8
tested on x86_64 AMDX2
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-22 13:49:24 +01:00
Shaohua Li ae54abed63 cfq-iosched: split seeky coop queues after one slice
Currently we split seeky coop queues after 1s, which is too big. Below patch
marks seeky coop queue split_coop flag after one slice. After that, if new
requests come in, the queues will be splitted. Patch is suggested by Corrado.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-05 13:11:45 +01:00
Vivek Goyal 1efe8fe1c2 cfq-iosched: Do not idle on async queues
Few weeks back, Shaohua Li had posted similar patch. I am reposting it
with more test results.

This patch does two things.

- Do not idle on async queues.

- It also changes the write queue depth CFQ drives (cfq_may_dispatch()).
  Currently, we seem to driving queue depth of 1 always for WRITES. This is
  true even if there is only one write queue in the system and all the logic
  of infinite queue depth in case of single busy queue as well as slowly
  increasing queue depth based on last delayed sync request does not seem to
  be kicking in at all.

This patch will allow deeper WRITE queue depths (subjected to the other
WRITE queue depth contstraints like cfq_quantum and last delayed sync
request).

Shaohua Li had reported getting more out of his SSD. For me, I have got
one Lun exported from an HP EVA and when pure buffered writes are on, I
can get more out of the system. Following are test results of pure
buffered writes (with end_fsync=1) with vanilla and patched kernel. These
results are average of 3 sets of run with increasing number of threads.

AVERAGE[bufwfs][vanilla]
-------
job       Set NR  ReadBW(KB/s)   MaxClat(us)    WriteBW(KB/s)  MaxClat(us)
---       --- --  ------------   -----------    -------------  -----------
bufwfs    3   1   0              0              95349          474141
bufwfs    3   2   0              0              100282         806926
bufwfs    3   4   0              0              109989         2.7301e+06
bufwfs    3   8   0              0              116642         3762231
bufwfs    3   16  0              0              118230         6902970

AVERAGE[bufwfs] [patched kernel]
-------
bufwfs    3   1   0              0              270722         404352
bufwfs    3   2   0              0              206770         1.06552e+06
bufwfs    3   4   0              0              195277         1.62283e+06
bufwfs    3   8   0              0              260960         2.62979e+06
bufwfs    3   16  0              0              299260         1.70731e+06

I also ran buffered writes along with some sequential reads and some
buffered reads going on in the system on a SATA disk because the potential
risk could be that we should not be driving queue depth higher in presence
of sync IO going to keep the max clat low.

With some random and sequential reads going on in the system on one SATA
disk I did not see any significant increase in max clat. So it looks like
other WRITE queue depth control logic is doing its job. Here are the
results.

AVERAGE[brr, bsr, bufw together] [vanilla]
-------
job       Set NR  ReadBW(KB/s)   MaxClat(us)    WriteBW(KB/s)  MaxClat(us)
---       --- --  ------------   -----------    -------------  -----------
brr       3   1   850            546345         0              0
bsr       3   1   14650          729543         0              0
bufw      3   1   0              0              23908          8274517

brr       3   2   981.333        579395         0              0
bsr       3   2   14149.7        1175689        0              0
bufw      3   2   0              0              21921          1.28108e+07

brr       3   4   898.333        1.75527e+06    0              0
bsr       3   4   12230.7        1.40072e+06    0              0
bufw      3   4   0              0              19722.3        2.4901e+07

brr       3   8   900            3160594        0              0
bsr       3   8   9282.33        1.91314e+06    0              0
bufw      3   8   0              0              18789.3        23890622

AVERAGE[brr, bsr, bufw mixed] [patched kernel]
-------
job       Set NR  ReadBW(KB/s)   MaxClat(us)    WriteBW(KB/s)  MaxClat(us)
---       --- --  ------------   -----------    -------------  -----------
brr       3   1   837            417973         0              0
bsr       3   1   14357.7        591275         0              0
bufw      3   1   0              0              24869.7        8910662

brr       3   2   1038.33        543434         0              0
bsr       3   2   13351.3        1205858        0              0
bufw      3   2   0              0              18626.3        13280370

brr       3   4   913            1.86861e+06    0              0
bsr       3   4   12652.3        1430974        0              0
bufw      3   4   0              0              15343.3        2.81305e+07

brr       3   8   890            2.92695e+06    0              0
bsr       3   8   9635.33        1.90244e+06    0              0
bufw      3   8   0              0              17200.3        24424392

So looks like it might make sense to include this patch.

Thanks
Vivek

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-02 20:46:10 +01:00
Divyesh Shah 875feb63b9 cfq-iosched: Respect ioprio_class when preempting
In cfq_should_preempt(), we currently allow some cases where a non-RT request
can preempt an ongoing RT cfqq timeslice. This should not happen.
Examples include:

o A sync_noidle wl type non-RT request pre-empting a sync_noidle wl type cfqq
  on which we are idling.
o Once we have per-cgroup async queues, a non-RT sync request pre-empting a RT
  async cfqq.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-01-11 16:16:18 +01:00
Shaohua Li 2f7a2d89a8 cfq-iosched: don't regard requests with long distance as close
seek_mean could be very big sometimes, using it as close criteria is meaningless
as this doen't improve any performance. So if it's big, let's fallback to
default value.

Reviewed-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-28 13:18:44 +01:00
Vivek Goyal 65b32a573e cfq-iosched: Remove prio_change logic for workload selection
o CFQ now internally divides cfq queues in therr workload categories. sync-idle,
  sync-noidle and async. Which workload to run depends primarily on rb_key
  offset across three service trees. Which is a combination of mulitiple things
  including what time queue got queued on the service tree.

  There is one exception though. That is if we switched the prio class, say
  we served some RT tasks and again started serving BE class, then with-in
  BE class we always started with sync-noidle workload irrespective of rb_key
  offset in service trees.

  This can provide better latencies for sync-noidle workload in the presence
  of RT tasks.

o This patch gets rid of that exception and which workload to run with-in
  class always depends on lowest rb_key across service trees. The reason
  being that now we have multiple BE class groups and if we always switch
  to sync-noidle workload with-in group, we can potentially starve a sync-idle
  workload with-in group. Same is true for async workload which will be in
  root group. Also the workload-switching with-in group will become very
  unpredictable as it now depends whether some RT workload was running in
  the system or not.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18 12:40:21 +01:00
Vivek Goyal fb104db41e cfq-iosched: Get rid of nr_groups
o Currently code does not seem to be using cfqd->nr_groups. Get rid of it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18 12:40:21 +01:00
Vivek Goyal 1db32c4060 cfq-iosched: Remove the check for same cfq group from allow_merge
o allow_merge() already checks if submitting task is pointing to same cfqq
  as rq has been queued in. If everything is fine, we should not be having
  a task in one cgroup and having a pointer to cfqq in other cgroup.

  Well I guess in some situations it can happen and that is, when a random
  IO queue has been moved into root cgroup for group_isolation=0. In
  this case, tasks's cgroup/group is different from where actually cfqq is,
  but this is intentional and in this case merging should be allowed.

  The second situation is where due to close cooperator patches, multiple
  processes can be sharing a cfqq. If everything implemented right, we should
  not end up in a situation where tasks from different processes in different
  groups are sharing the same cfqq as we allow merging of cooperating queues
  only if they are in same group.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18 12:40:21 +01:00
Gui Jianfeng 66ae291978 cfq: set workload as expired if it doesn't have any slice left
When a group is resumed, if it doesn't have workload slice left,
we should set workload_expires as expired. Otherwise, we might
start from where we left in previous group by error.
Thanks the idea from Corrado.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-15 10:08:45 +01:00
Vivek Goyal 82bbbf28db Fix a CFQ crash in "for-2.6.33" branch of block tree
I think my previous patch introduced a bug which can lead to CFQ hitting
BUG_ON().

The offending commit in for-2.6.33 branch is.

commit 7667aa0630
Author: Vivek Goyal <vgoyal@redhat.com>
Date:   Tue Dec 8 17:52:58 2009 -0500

    cfq-iosched: Take care of corner cases of group losing share due to deletion

While doing some stress testing on my box, I enountered following.

login: [ 3165.148841] BUG: scheduling while
atomic: swapper/0/0x10000100
[ 3165.149821] Modules linked in: cfq_iosched dm_multipath qla2xxx igb
scsi_transport_fc dm_snapshot [last unloaded: scsi_wait_scan]
[ 3165.149821] Pid: 0, comm: swapper Not tainted
2.6.32-block-for-33-merged-new #3
[ 3165.149821] Call Trace:
[ 3165.149821]  <IRQ>  [<ffffffff8103fab8>] __schedule_bug+0x5c/0x60
[ 3165.149821]  [<ffffffff8103afd7>] ? __wake_up+0x44/0x4d
[ 3165.149821]  [<ffffffff8153a979>] schedule+0xe3/0x7bc
[ 3165.149821]  [<ffffffff8103a796>] ? cpumask_next+0x1d/0x1f
[ 3165.149821]  [<ffffffffa000b21d>] ? cfq_dispatch_requests+0x6ba/0x93e
[cfq_iosched]
[ 3165.149821]  [<ffffffff810422d8>] __cond_resched+0x2a/0x35
[ 3165.149821]  [<ffffffffa000b21d>] ? cfq_dispatch_requests+0x6ba/0x93e
[cfq_iosched]
[ 3165.149821]  [<ffffffff8153b1ee>] _cond_resched+0x2c/0x37
[ 3165.149821]  [<ffffffff8100e2db>] is_valid_bugaddr+0x16/0x2f
[ 3165.149821]  [<ffffffff811e4161>] report_bug+0x18/0xac
[ 3165.149821]  [<ffffffff8100f1fc>] die+0x39/0x63
[ 3165.149821]  [<ffffffff8153cde1>] do_trap+0x11a/0x129
[ 3165.149821]  [<ffffffff8100d470>] do_invalid_op+0x96/0x9f
[ 3165.149821]  [<ffffffffa000b21d>] ? cfq_dispatch_requests+0x6ba/0x93e
[cfq_iosched]
[ 3165.149821]  [<ffffffff81034b4d>] ? enqueue_task+0x5c/0x67
[ 3165.149821]  [<ffffffff8103ae83>] ? task_rq_unlock+0x11/0x13
[ 3165.149821]  [<ffffffff81041aae>] ? try_to_wake_up+0x292/0x2a4
[ 3165.149821]  [<ffffffff8100c935>] invalid_op+0x15/0x20
[ 3165.149821]  [<ffffffffa000b21d>] ? cfq_dispatch_requests+0x6ba/0x93e
[cfq_iosched]
[ 3165.149821]  [<ffffffff810df5a6>] ? virt_to_head_page+0xe/0x2f
[ 3165.149821]  [<ffffffff811d8c2a>] blk_peek_request+0x191/0x1a7
[ 3165.149821]  [<ffffffff811e5b8d>] ? kobject_get+0x1a/0x21
[ 3165.149821]  [<ffffffff812c8d4c>] scsi_request_fn+0x82/0x3df
[ 3165.149821]  [<ffffffff8110b2de>] ? bio_fs_destructor+0x15/0x17
[ 3165.149821]  [<ffffffff810df5a6>] ? virt_to_head_page+0xe/0x2f
[ 3165.149821]  [<ffffffff811d931f>] __blk_run_queue+0x42/0x71
[ 3165.149821]  [<ffffffff811d9403>] blk_run_queue+0x26/0x3a
[ 3165.149821]  [<ffffffff812c8761>] scsi_run_queue+0x2de/0x375
[ 3165.149821]  [<ffffffff812b60ac>] ? put_device+0x17/0x19
[ 3165.149821]  [<ffffffff812c92d7>] scsi_next_command+0x3b/0x4b
[ 3165.149821]  [<ffffffff812c9b9f>] scsi_io_completion+0x1c9/0x3f5
[ 3165.149821]  [<ffffffff812c3c36>] scsi_finish_command+0xb5/0xbe

I think I have hit following BUG_ON() in cfq_dispatch_request().

BUG_ON(RB_EMPTY_ROOT(&cfqq->sort_list));

Please find attached the patch to fix it. I have done some stress testing
with it and have not seen it happening again.

o We should wait on a queue even after slice expiry only if it is empty. If
  queue is not empty then continue to expire it.

o If we decide to keep the queue then make cfqq=NULL. Otherwise select_queue()
  will return a valid cfqq and cfq_dispatch_request() can hit following
  BUG_ON().

  BUG_ON(RB_EMPTY_ROOT(&cfqq->sort_list))

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-10 19:25:41 +01:00
Gui Jianfeng 554554f60a cfq: Remove wait_request flag when idle time is being deleted
Remove wait_request flag when idle time is being deleted, otherwise
it'll hit this path every time when a request is enqueued.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-10 09:38:39 +01:00
Corrado Zoccolo edc71131c4 cfq-iosched: commenting non-obvious initialization
Added a comment to explain the initialization of last_delayed_sync.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 20:56:04 +01:00
Vivek Goyal 7667aa0630 cfq-iosched: Take care of corner cases of group losing share due to deletion
If there is a sequential reader running in a group, we wait for next request
to come in that group after slice expiry and once new request is in, we expire
the queue. Otherwise we delete the group from service tree and group looses
its fair share.

So far I was marking a queue as wait_busy if it had consumed its slice and
it was last queue in the group. But this condition did not cover following
two cases.

1.If a request completed and slice has not expired yet. Next request comes
  in and is dispatched to disk. Now select_queue() hits and slice has expired.
  This group will be deleted. Because request is still in the disk, this queue
  will never get a chance to wait_busy.

2.If request completed and slice has not expired yet. Before next request
  comes in (delay due to think time), select_queue() hits and expires the
  queue hence group. This queue never got a chance to wait busy.

Gui was hitting the boundary condition 1 and not getting fairness numbers
proportional to weight.

This patch puts the checks for above two conditions and improves the fairness
numbers for sequential workload on rotational media. Check in select_queue()
takes care of case 1 and additional check in should_wait_busy() takes care
of case 2.

Reported-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 15:11:04 +01:00
Vivek Goyal c244bb50a9 cfq-iosched: Get rid of cfqq wait_busy_done flag
o Get rid of wait_busy_done flag. This flag only tells we were doing wait
  busy on a queue and that queue got request so expire it. That information
  can easily be obtained by (cfq_cfqq_wait_busy() && queue_is_not_empty). So
  remove this flag and keep code simple.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 15:11:03 +01:00
Gui Jianfeng b9d8f4c73b cfq: Optimization for close cooperating queue searching
It doesn't make any sense to try to find out a close cooperating
queue if current cfqq is the only one in the group.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 15:11:03 +01:00
Corrado Zoccolo 573412b295 cfq-iosched: reduce write depth only if sync was delayed
The introduction of ramp-up formula for async queue depths has
slowed down dirty page reclaim, by reducing async write performance.
This patch makes sure the formula kicks in only when sync request
was recently delayed.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 12:32:55 +01:00
Vivek Goyal 878eaddd05 cfq-iosched: Do not access cfqq after freeing it
Fix a crash during boot reported by Jeff Moyer. Fix the issue of accessing
cfqq after freeing it.

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-12-07 19:37:15 +01:00
Jens Axboe bb729bc98c cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit
After the merge of the IO controller patches, booting on my megaraid
box ran much slower. Vivek Goyal traced it down to megaraid discovery
creating tons of devices, each suffering a grace period when they later
kill that queue (if no device is found).

So lets use call_rcu() to batch these deferred frees, instead of taking
the grace period hit for each one.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-06 09:54:19 +01:00
Vivek Goyal 3e25206689 blkio: Implement dynamic io controlling policy registration
o One of the goals of block IO controller is that it should be able to
  support mulitple io control policies, some of which be operational at
  higher level in storage hierarchy.

o To begin with, we had one io controlling policy implemented by CFQ, and
  I hard coded the CFQ functions called by blkio. This created issues when
  CFQ is compiled as module.

o This patch implements a basic dynamic io controlling policy registration
  functionality in blkio. This is similar to elevator functionality where
  ioschedulers register the functions dynamically.

o Now in future, when more IO controlling policies are implemented, these
  can dynakically register with block IO controller.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 16:38:14 +01:00
Vivek Goyal 9d6a986c0b blkio: Export some symbols from blkio as its user CFQ can be a module
o blkio controller is inside the kernel and cfq makes use of interfaces
  exported by blkio. CFQ can be a module too, hence export symbols used
  by CFQ.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 16:38:14 +01:00
Shaohua Li 3c764b7a65 cfq-iosched: make nonrot check logic consistent
cfq_arm_slice_timer() has logic to disable idle window for SSD device. The same
thing should be done at cfq_select_queue() too, otherwise we will still see
idle window. This makes the nonrot check logic consistent in cfq.
Tests in a intel SSD with low_latency knob close, below patch can triple disk
thoughput for muti-thread sequential read.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 13:12:06 +01:00
Jens Axboe f2eecb9152 cfq-iosched: move IO controller declerations to a header file
They should not be declared inside some other file that's not related
to CFQ.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 10:06:35 +01:00
Vivek Goyal c04645e592 blkio: Wait on sync-noidle queue even if rq_noidle = 1
o rq_noidle() is supposed to tell cfq that do not expect a request after this
  one, hence don't idle. But this does not seem to work very well. For example
  for direct random readers, rq_noidle = 1 but there is next request coming
  after this. Not idling, leads to a group not getting its share even if
  group_isolation=1.

o The right solution for this issue is to scan the higher layers and set
  right flag (WRITE_SYNC or WRITE_ODIRECT). For the time being, this single
  line fix helps. This should not have any significant impact when we are
  not using cgroups. I will later figure out IO paths in higher layer and
  fix it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal ae30c28655 blkio: Implement group_isolation tunable
o If a group is running only a random reader, then it will not have enough
  traffic to keep disk busy and we will reduce overall throughput. This
  should result in better latencies for random reader though. If we don't
  idle on random reader service tree, then this random reader will experience
  large latencies if there are other groups present in system with sequential
  readers running in these.

o One solution suggested by corrado is that by default keep the random readers
  or sync-noidle workload in root group so that during one dispatch round
  we idle only once on sync-noidle tree. This means that all the sync-idle
  workload queues will be in their respective group and we will see service
  differentiation in those but not on sync-noidle workload.

o Provide a tunable group_isolation. If set, this will make sure that even
  sync-noidle queues go in their respective group and we wait on these. This
  provides stronger isolation between groups but at the expense of throughput
  if group does not have enough traffic to keep the disk busy.

o By default group_isolation = 0

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal f26bd1f0a3 blkio: Determine async workload length based on total number of queues
o Async queues are not per group. Instead these are system wide and maintained
  in root group. Hence their workload slice length should be calculated
  based on total number of queues in the system and not just queues in the
  root group.

o As root group's default weight is 1000, make sure to charge async queue
  more in terms of vtime so that it does not get more time on disk because
  root group has higher weight.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal f75edf2dc8 blkio: Wait for cfq queue to get backlogged if group is empty
o If a queue consumes its slice and then gets deleted from service tree, its
  associated group will also get deleted from service tree if this was the
  only queue in the group. That will make group loose its share.

o For the queues on which we have idling on and if these have used their
  slice, wait a bit for these queues to get backlogged again and then
  expire these queues so that group does not loose its share.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal f8d461d692 blkio: Propagate cgroup weight updation to cfq groups
o Propagate blkio cgroup weight updation to associated cfq groups.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal 24610333d5 blkio: Drop the reference to queue once the task changes cgroup
o If a task changes cgroup, drop reference to the cfqq associated with io
  context and set cfqq pointer stored in ioc to NULL so that upon next request
  arrival we will allocate a  new queue in new group.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 8682e1f15f blkio: Provide some isolation between groups
o Do not allow following three operations across groups for isolation.
	- selection of co-operating queues
	- preemtpions across groups
	- request merging across groups.

o Async queues are currently global and not per group. Allow preemption of
  an async queue if a sync queue in other group gets backlogged.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 220841906f blkio: Export disk time and sectors used by a group to user space
o Export disk time and sector used by a group to user space through cgroup
  interface.

o Also export a "dequeue" interface to cgroup which keeps track of how many
  a times a group was deleted from service tree. Helps in debugging.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 2868ef7b39 blkio: Some debugging aids for CFQ
o Some debugging aids for CFQ.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal b1c3576961 blkio: Take care of cgroup deletion and cfq group reference counting
o One can choose to change elevator or delete a cgroup. Implement group
  reference counting so that both elevator exit and cgroup deletion can
  take place gracefully.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Nauman Rafique <nauman@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 25fb5169d4 blkio: Dynamic cfq group creation based on cgroup tasks belongs to
o Determine the cgroup IO submitting task belongs to and create the cfq
  group if it does not exist already.

o Also link cfqq and associated cfq group.

o Currently all async IO is mapped to root group.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal dae739ebc4 blkio: Group time used accounting and workload context save restore
o This patch introduces the functionality to do the accounting of group time
  when a queue expires. This time used decides which is the group to go
  next.

o Also introduce the functionlity to save and restore the workload type
  context with-in group. It might happen that once we expire the cfq queue
  and group, a different group will schedule in and we will lose the context
  of the workload type. Hence save and restore it upon queue expiry.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 58ff82f34c blkio: Implement per cfq group latency target and busy queue avg
o So far we had 300ms soft target latency system wide. Now with the
  introduction of cfq groups, divide that latency by number of groups so
  that one can come up with group target latency which will be helpful
  in determining the workload slice with-in group and also the dynamic
  slice length of the cfq queue.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 25bc6b0776 blkio: Introduce per cfq group weights and vdisktime calculations
o Bring in the per cfq group weight and how vdisktime is calculated for the
  group. Also bring in the functionality of updating the min_vdisktime of
  the group service tree.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 1fa8f6d68b blkio: Introduce the root service tree for cfq groups
o So far we just had one cfq_group in cfq_data. To create space for more than
  one cfq_group, we need to have a service tree of groups where all the groups
  can be queued if they have active cfq queues backlogged in these.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal f04a642463 blkio: Keep queue on service tree until we expire it
o Currently cfqq deletes a queue from service tree if it is empty (even if
  we might idle on the queue). This patch keeps the queue on service tree
  hence associated group remains on the service tree until we decide that
  we are not going to idle on the queue and expire it.

o This just helps in time accounting for queue/group and in implementation
  of rest of the patches.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal 615f0259e6 blkio: Implement macro to traverse each service tree in group
o Implement a macro to traverse each service tree in the group. This avoids
  usage of double for loop and special condition for idle tree 4 times.

o Macro is little twisted because of special handling of idle class service
  tree.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal cdb16e8f73 blkio: Introduce the notion of cfq groups
o This patch introduce the notion of cfq groups. Soon we will can have multiple
  groups of different weights in the system.

o Various service trees (prioclass and workload type trees), will become per
  cfq group. So hierarchy looks as follows.

			cfq_groups
			   |
			workload type
			   |
		        cfq queue

o When an scheduling decision has to be taken, first we select the cfq group
  then workload with-in the group and then cfq queue with-in the workload
  type.

o This patch just makes various workload service tree per cfq group and
  introduce the function to be able to choose a group for scheduling.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal bf79193710 blkio: Set must_dispatch only if we decided to not dispatch the request
o must_dispatch flag should be set only if we decided not to run the queue
  and dispatch the request.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Shaohua Li 474b18ccc2 cfq-iosched: no dispatch limit for single queue
Since commit 2f5cb7381b, each queue can send
up to 4 * 4 requests if only one queue exists. I wonder why we have such limit.
Device supports tag can send more requests. For example, AHCI can send 31
requests. Test (direct aio randread) shows the limits reduce about 4% disk
thoughput.
On the other hand, since we send one request one time, if other queue
pop when current is sending more than cfq_quantum requests, current queue will
stop send requests soon after one request, so sounds there is no big latency.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 12:58:05 +01:00
Jens Axboe 464191c65b Revert "cfq: Make use of service count to estimate the rb_key offset"
This reverts commit 3586e917f2.

Corrado Zoccolo <czoccolo@gmail.com> correctly points out, that we need
consistency of rb_key offset across groups. This means we cannot properly
use the per-service_tree service count. Revert this change.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-30 09:38:13 +01:00
Corrado Zoccolo 8e550632cc cfq-iosched: fix corner cases in idling logic
Idling logic was disabled in some corner cases, leading to unfair share
 for noidle queues.
 * the idle timer was not armed if there were other requests in the
   driver. unfortunately, those requests could come from other workloads,
   or queues for which we don't enable idling. So we will check only
   pending requests from the active queue
 * rq_noidle check on no-idle queue could disable the end of tree idle if
   the last completed request was rq_noidle. Now, we will disable that
   idle only if all the queues served in the no-idle tree had rq_noidle
   requests.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:39:31 +01:00
Corrado Zoccolo 76280aff1c cfq-iosched: idling on deep seeky sync queues
Seeky sync queues with large depth can gain unfairly big share of disk
 time, at the expense of other seeky queues. This patch ensures that
 idling will be enabled for queues with I/O depth at least 4, and small
 think time. The decision to enable idling is sticky, until an idle
 window times out without seeing a new request.

The reasoning behind the decision is that, if an application is using
large I/O depth, it is already optimized to make full utilization of
the hardware, and therefore we reserve a slice of exclusive use for it.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:39:31 +01:00
Corrado Zoccolo e4a229196a cfq-iosched: fix no-idle preemption logic
An incoming no-idle queue should preempt the active no-idle queue
 only if the active queue is idling due to service tree empty.
 Previous code was buggy in two ways:
 * it relied on service_tree field to be set on the active queue, while
   it is not set when the code is idling for a new request
 * it didn't check for the service tree empty condition, so could lead to
   LIFO behaviour if multiple queues with depth > 1 were preempting each
   other on an non-NCQ device.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:39:31 +01:00
Corrado Zoccolo e459dd08f4 cfq-iosched: fix ncq detection code
CFQ's detection of queueing devices initially assumes a queuing device
and detects if the queue depth reaches a certain threshold.
However, it will reconsider this choice periodically.

Unfortunately, if device is considered not queuing, CFQ will force a
unit queue depth for some workloads, thus defeating the detection logic.
This leads to poor performance on queuing hardware,
since the idle window remains enabled.

Given this premise, switching to hw_tag = 0 after we have proved at
least once that the device is NCQ capable is not a good choice.

The new detection code starts in an indeterminate state, in which CFQ behaves
as if hw_tag = 1, and then, if for a long observation period we never saw
large depth, we switch to hw_tag = 0, otherwise we stick to hw_tag = 1,
without reconsidering it again.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:02:57 +01:00
Corrado Zoccolo c16632bab1 cfq-iosched: cleanup unreachable code
cfq_should_idle returns false for no-idle queues that are not the last,
so the control flow will never reach the removed code in a state that
satisfies the if condition.
The unreachable code was added to emulate previous cfq behaviour for
non-NCQ rotational devices. My tests show that even without it, the
performances and fairness are comparable with previous cfq, thanks to
the fact that all seeky queues are grouped together, and that we idle at
the end of the tree.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 09:46:46 +01:00
Gui Jianfeng 3586e917f2 cfq: Make use of service count to estimate the rb_key offset
For the moment, different workload cfq queues are put into different
service trees. But CFQ still uses "busy_queues" to estimate rb_key
offset when inserting a cfq queue into a service tree. I think this
isn't appropriate, and it should make use of service tree count to do
this estimation. This patch is for for-2.6.33 branch.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 09:14:11 +01:00
Randy Dunlap ad5ebd2fa2 block: jiffies fixes
Use HZ-independent calculation of milliseconds.
Add jiffies.h where it was missing since functions or macros
from it are used.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-11 13:47:45 +01:00
Corrado Zoccolo cf7c25cf91 cfq-iosched: fix next_rq computation
Cfq has a bug in computation of next_rq, that affects transition
between multiple sequential request streams in a single queue
(e.g.: two sequential buffered writers of the same priority),
causing the alternation between the two streams for a transient period.

  8,0    1    18737     0.260400660  5312  D   W 141653311 + 256
  8,0    1    20839     0.273239461  5400  D   W 141653567 + 256
  8,0    1    20841     0.276343885  5394  D   W 142803919 + 256
  8,0    1    20843     0.279490878  5394  D   W 141668927 + 256
  8,0    1    20845     0.292459993  5400  D   W 142804175 + 256
  8,0    1    20847     0.295537247  5400  D   W 141668671 + 256
  8,0    1    20849     0.298656337  5400  D   W 142804431 + 256
  8,0    1    20851     0.311481148  5394  D   W 141668415 + 256
  8,0    1    20853     0.314421305  5394  D   W 142804687 + 256
  8,0    1    20855     0.318960112  5400  D   W 142804943 + 256

The fix makes sure that the next_rq is computed from the last
dispatched request, and not affected by merging.

  8,0    1    37776     4.305161306     0  D   W 141738087 + 256
  8,0    1    37778     4.308298091     0  D   W 141738343 + 256
  8,0    1    37780     4.312885190     0  D   W 141738599 + 256
  8,0    1    37782     4.315933291     0  D   W 141738855 + 256
  8,0    1    37784     4.319064459     0  D   W 141739111 + 256
  8,0    1    37786     4.331918431  5672  D   W 142803007 + 256
  8,0    1    37788     4.334930332  5672  D   W 142803263 + 256
  8,0    1    37790     4.337902723  5672  D   W 142803519 + 256
  8,0    1    37792     4.342359774  5672  D   W 142803775 + 256
  8,0    1    37794     4.345318286     0  D   W 142804031 + 256

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-08 17:16:46 +01:00
Jens Axboe e00ef79971 cfq-iosched: get rid of the coop_preempt flag
We need to rework this logic post the cooperating cfq_queue merging,
for now just get rid of it and Jeff Moyer will fix the fall out.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-04 08:54:55 +01:00
Jens Axboe 125c4f221a cfq-iosched: fix merge error
We ended up with testing the same condition twice, pretty
pointless. Remove that first if.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 21:25:45 +01:00
Jens Axboe 2058297d2d Merge branch 'for-linus' into for-2.6.33
Conflicts:
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 21:14:39 +01:00
Jens Axboe 150e6c67f4 Merge branch 'cfq-2.6.33' into for-2.6.33 2009-11-03 21:12:10 +01:00
Shaohua Li 4b27e1bb44 cfq-iosched: limit coop preemption
CFQ has an optimization for cooperated applications. if several
io-context have close requests, they will get boost. But the
optimization get abused. Considering thread a, b, which work on one
file. a reads sectors s, s+2, s+4, ...; b reads sectors s+1, s+3, s
+5, ... Both a and b are sequential read, so they can open idle window.
a reads a sector s and goes to idle window and wakeup b. b reads sector
s+1, since in current implementation, cfq_should_preempt() thinks a and
b are cooperators, b will preempt a. b then reads sector s+1 and goes to
idle window and wakeup a. for the same reason, a will preempt b and
reads s+2. a and b will continue the circle. The circle will be very
long, and a and b will occupy whole disk queue. Other applications will
nearly have no chance to run.

Fix this limiting coop preempt until a queue is scheduled normally
again.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 20:25:02 +01:00
Jens Axboe e6ec4fe245 cfq-iosched: fix bad return value cfq_should_preempt()
Commit a6151c3a5c inadvertently reversed
a preempt condition check, potentially causing a performance regression.
Make the meta check correct again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 20:21:35 +01:00
Corrado Zoccolo dddb74519a cfq-iosched: simplify prio-unboost code
Eliminate redundant checks.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-02 10:40:37 +01:00
Jens Axboe 5869619cb5 cfq-iosched: fix style issue in cfq_get_avg_queues()
Line breaks and bad brace placement.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:27:07 +01:00
Corrado Zoccolo 718eee0579 cfq-iosched: fairness for sync no-idle queues
Currently no-idle queues in cfq are not serviced fairly:
even if they can only dispatch a small number of requests at a time,
they have to compete with idling queues to be serviced, experiencing
large latencies.

We should notice, instead, that no-idle queues are the ones that would
benefit most from having low latency, in fact they are any of:
* processes with large think times (e.g. interactive ones like file
  managers)
* seeky (e.g. programs faulting in their code at startup)
* or marked as no-idle from upper levels, to improve latencies of those
  requests.

This patch improves the fairness and latency for those queues, by:
* separating sync idle, sync no-idle and async queues in separate
  service_trees, for each priority
* service all no-idle queues together
* and idling when the last no-idle queue has been serviced, to
  anticipate for more no-idle work
* the timeslices allotted for idle and no-idle service_trees are
  computed proportionally to the number of processes in each set.

Servicing all no-idle queues together should have a performance boost
for NCQ-capable drives, without compromising fairness.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo a6d44e982d cfq-iosched: enable idling for last queue on priority class
cfq can disable idling for queues in various circumstances.
When workloads of different priorities are competing, if the higher
priority queue has idling disabled, lower priority queues may steal
its disk share. For example, in a scenario with an RT process
performing seeky reads vs a BE process performing sequential reads,
on an NCQ enabled hardware, with low_latency unset,
the RT process will dispatch only the few pending requests every full
slice of service for the BE process.

The patch solves this issue by always performing idle on the last
queue at a given priority class > idle. If the same process, or one
that can pre-empt it (so at the same priority or higher), submits a
new request within the idle window, the lower priority queue won't
dispatch, saving the disk bandwidth for higher priority ones.

Note: this doesn't touch the non_rotational + NCQ case (no hardware
to test if this is a benefit in that case).

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo c0324a020e cfq-iosched: reimplement priorities using different service trees
We use different service trees for different priority classes.
This allows a simplification in the service tree insertion code, that no
longer has to consider priority while walking the tree.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo aa6f6a3de1 cfq-iosched: preparation to handle multiple service trees
We embed a pointer to the service tree in each queue, to handle multiple
service trees easily.
Service trees are enriched with a counter.
cfq_add_rq_rb is invoked after putting the rq in the fifo, to ensure
that all fields in rq are properly initialized.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo 5db5d64277 cfq-iosched: adapt slice to number of processes doing I/O
When the number of processes performing I/O concurrently increases,
a fixed time slice per process will cause large latencies.

This patch, if low_latency mode is enabled,  will scale the time slice
assigned to each process according to a 300ms target latency.

In order to keep fairness among processes:
* The number of active processes is computed using a special form of
running average, that quickly follows sudden increases (to keep latency low),
and decrease slowly (to have fairness in spite of rapid decreases of this
value).

To safeguard sequential bandwidth, we impose a minimum time slice
(computed using 2*cfq_slice_idle as base, adjusted according to priority
and async-ness).

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00