Pull coccinelle updates from Julia Lawall:
"Remove some semantic patches and remove a maintainer.
Qing Wang <wangqing@vivo.com> reported that fen.cocci mostly finds
false positives, so it is dropped.
scripts/coccinelle/iterators/for_each_child.cocci also subsumes it, in
a more correct way.
Matthew Wilcox <willy@infradead.org> reported that bugon.cocci mostly
gives false positives. It is an old script and was designed to be
inaccurate to maximally cover problems, but most of what it is useful
for has been done already.
Gilles Muller passed away and is thus dropped from the maintainers
list"
* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
drop fen.cocci
scripts/coccinelle: drop bugon.cocci
MAINTAINERS: remove Gilles Muller
New:
- The Real Time Linux Analysis (RTLA) tool is added to the tools directory.
- Can safely filter on user space pointers with: field.ustring ~ "match-string"
- eprobes can now be filtered like any other event.
- trace_marker(_raw) now uses stream_open() to allow multiple threads to safely
write to it. Note, this could possibly break existing user space, but we will
not know until we hear about it, and then can revert the change if need be.
- New field in events to display when bottom halfs are disabled.
- Sorting of the ftrace functions are now done at compile time instead of
at bootup.
Infrastructure changes to support future efforts:
- Added __rel_loc type for trace events. Similar to __data_loc but the offset
to the dynamic data is based off of the location of the descriptor and not
the beginning of the event. Needed for user defined events.
- Some simplification of event trigger code.
- Make synthetic events process its callback better to not hinder other
event callbacks that are registered. Needed for user defined events.
And other small fixes and clean ups.
-
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYeGvcxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrZtAP9ICjJxX54MTErElhhUL/NFLV7wqhJi
OIAgmp6jGVRqPAD+JxQtBnGH+3XMd71ioQkTfQ1rp+jBz2ERBj2DmELUAg0=
=zmda
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New:
- The Real Time Linux Analysis (RTLA) tool is added to the tools
directory.
- Can safely filter on user space pointers with: field.ustring ~
"match-string"
- eprobes can now be filtered like any other event.
- trace_marker(_raw) now uses stream_open() to allow multiple threads
to safely write to it. Note, this could possibly break existing
user space, but we will not know until we hear about it, and then
can revert the change if need be.
- New field in events to display when bottom halfs are disabled.
- Sorting of the ftrace functions are now done at compile time
instead of at bootup.
Infrastructure changes to support future efforts:
- Added __rel_loc type for trace events. Similar to __data_loc but
the offset to the dynamic data is based off of the location of the
descriptor and not the beginning of the event. Needed for user
defined events.
- Some simplification of event trigger code.
- Make synthetic events process its callback better to not hinder
other event callbacks that are registered. Needed for user defined
events.
And other small fixes and cleanups"
* tag 'trace-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
tracing: Add ustring operation to filtering string pointers
rtla: Add rtla timerlat hist documentation
rtla: Add rtla timerlat top documentation
rtla: Add rtla timerlat documentation
rtla: Add rtla osnoise hist documentation
rtla: Add rtla osnoise top documentation
rtla: Add rtla osnoise man page
rtla: Add Documentation
rtla/timerlat: Add timerlat hist mode
rtla: Add timerlat tool and timelart top mode
rtla/osnoise: Add the hist mode
rtla/osnoise: Add osnoise top mode
rtla: Add osnoise tool
rtla: Helper functions for rtla
rtla: Real-Time Linux Analysis tool
tracing/osnoise: Properly unhook events if start_per_cpu_kthreads() fails
tracing: Remove duplicate warnings when calling trace_create_file()
tracing/kprobes: 'nmissed' not showed correctly for kretprobe
tracing: Add test for user space strings when filtering on string pointers
tracing: Have syscall trace events use trace_event_buffer_lock_reserve()
...
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
Add typo "oveflow" for "overflow". This typo was found and fixed in
tools/testing/selftests/bpf/prog_tests/btf_dump.c
Link: https://lore.kernel.org/all/20211122070528.837806-1-dfustini@baylibre.com/
Link: https://lkml.kernel.org/r/20211122072302.839102-1-dfustini@baylibre.com
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Drew Fustini <dfustini@baylibre.com>
Cc: zuoqilin <zuoqilin@yulong.com>
Cc: Tom Saeger <tom.saeger@oracle.com>
Cc: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This semantic patch does not take into account the fact that of_node_put
can be safely applied to NULL. Thus it gives only false positives.
Drop it.
Reported-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
The BUG_ON script was never safe, in that it was not able to check
whether the condition was side-effecting. At this point, BUG_ON
should be well known, so it has probably outlived its usefuless.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Currently bpf_helper_defs.h and the bpf helpers man page are auto-generated
using function documentation present in bpf.h. If the documentation for the
helper is missing or doesn't follow a specific format for e.g. if a function
is documented as:
* long bpf_kallsyms_lookup_name( const char *name, int name_sz, int flags, u64 *res )
instead of
* long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res)
(notice the extra space at the start and end of function arguments)
then that helper is not dumped in the auto-generated header and results in
an invalid call during eBPF runtime, even if all the code specific to the
helper is correct.
This patch checks the number of functions documented within the header file
with those present as part of #define __BPF_FUNC_MAPPER and raises an
Exception if they don't match. It is not needed with the currently documented
upstream functions, but can help in debugging when developing new helpers
when there might be missing or misformatted documentation.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220112114953.722380-1-usama.arif@bytedance.com
Here is the large set of char, misc, and other "small" driver subsystem
changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the full
details.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYeGNAQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoVgCg1CPjMu8/SDj3Sm3a1UMQJn9jnl8AnjQcEp3z
hMr9mISG4r6g4PvjrJBj
=9May
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char, misc, and other "small" driver
subsystem changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the
full details.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
counter: 104-quad-8: Fix use-after-free by quad8_irq_handler
dt-bindings: mux: Document mux-states property
dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
counter: remove old and now unused registration API
counter: ti-eqep: Convert to new counter registration
counter: stm32-lptimer-cnt: Convert to new counter registration
counter: stm32-timer-cnt: Convert to new counter registration
counter: microchip-tcb-capture: Convert to new counter registration
counter: ftm-quaddec: Convert to new counter registration
counter: intel-qep: Convert to new counter registration
counter: interrupt-cnt: Convert to new counter registration
counter: 104-quad-8: Convert to new counter registration
counter: Update documentation for new counter registration functions
counter: Provide alternative counter registration functions
counter: stm32-timer-cnt: Convert to counter_priv() wrapper
counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper
counter: ti-eqep: Convert to counter_priv() wrapper
counter: ftm-quaddec: Convert to counter_priv() wrapper
counter: intel-qep: Convert to counter_priv() wrapper
counter: microchip-tcb-capture: Convert to counter_priv() wrapper
...
When the kernel starts, the initialization of ftrace takes
up a portion of the time (approximately 6~8ms) to sort mcount
addresses. We can save this time by moving mcount-sorting to
compile time.
Link: https://lkml.kernel.org/r/20211212113358.34208-2-yinan@linux.alibaba.com
Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some architectures support self-extracting kernel, which embeds the
compressed vmlinux.
It has 4 byte data at the end so the decompressor can know the vmlinux
size beforehand.
GZIP natively has it in the trailer, but for the other compression
algorithms, the hand-crafted trailer is added.
It is unneeded to generate such _corrupted_ compressed files because
it is possible to pass the size data as a separate file.
For example, the assembly code:
.incbin "compressed-vmlinux-with-size-data"
can be transformed to:
.incbin "compressed-vmlinux"
.incbin "size-data"
My hope is, after some reworks of the decompressors, the macros
cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}_with_size will go away.
This new macro, cmd_file_size, will be useful to generate a separate
size-data file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
GZIP-compressed files end with 4 byte data that represents the size
of the original input. The decompressors (the self-extracting kernel)
exploit it to know the vmlinux size beforehand. To mimic the GZIP's
trailer, Kbuild provides cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}.
Unfortunately these macros are used everywhere despite the appended
size data is only useful for the decompressors.
There is no guarantee that such hand-crafted trailers are safely ignored.
In fact, the kernel refuses compressed initramdfs with the garbage data.
That is why usr/Makefile overrides size_append to make it no-op.
To limit the use of such broken compressed files, this commit renames
the existing macros as follows:
cmd_bzip2 --> cmd_bzip2_with_size
cmd_lzma --> cmd_lzma_with_size
cmd_lzo --> cmd_lzo_with_size
cmd_lz4 --> cmd_lz4_with_size
cmd_xzkern --> cmd_xzkern_with_size
cmd_zstd22 --> cmd_zstd22_with_size
To keep the decompressors working, I updated the following Makefiles
accordingly:
arch/arm/boot/compressed/Makefile
arch/h8300/boot/compressed/Makefile
arch/mips/boot/compressed/Makefile
arch/parisc/boot/compressed/Makefile
arch/s390/boot/compressed/Makefile
arch/sh/boot/compressed/Makefile
arch/x86/boot/compressed/Makefile
I reused the current macro names for the normal usecases; they produce
the compressed data in the proper format.
I did not touch the following:
arch/arc/boot/Makefile
arch/arm64/boot/Makefile
arch/csky/boot/Makefile
arch/mips/boot/Makefile
arch/riscv/boot/Makefile
arch/sh/boot/Makefile
kernel/Makefile
This means those Makefiles will stop appending the size data.
I dropped the 'override size_append' hack from usr/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
The appended file size is only used by the decompressors, which some
architectures support.
As the comment "zstd22 is used for kernel compression" says, cmd_zstd22
is used in arch/{mips,s390,x86}/boot/compressed/Makefile.
On the other hand, there is no good reason to append the file size to
cmd_zstd since it is used for other purposes.
Actually cmd_zstd is only used in usr/Makefile, where the appended file
size is rather harmful.
The initramfs with its file size appended is considered as corrupted
data, so commit 65e00e04e5 ("initramfs: refactor the initramfs build
rules") added 'override size_append := :' to make it no-op.
As a conclusion, this $(size_append) should not exist here.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed up.
- Add Straight Light Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=R52z
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed
up.
- Add Straight Line Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
* tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/entry_32: Fix segment exceptions
objtool: Remove .fixup handling
x86: Remove .fixup section
x86/word-at-a-time: Remove .fixup usage
x86/usercopy: Remove .fixup usage
x86/usercopy_32: Simplify __copy_user_intel_nocache()
x86/sgx: Remove .fixup usage
x86/checksum_32: Remove .fixup usage
x86/vmx: Remove .fixup usage
x86/kvm: Remove .fixup usage
x86/segment: Remove .fixup usage
x86/fpu: Remove .fixup usage
x86/xen: Remove .fixup usage
x86/uaccess: Remove .fixup usage
x86/futex: Remove .fixup usage
x86/msr: Remove .fixup usage
x86/extable: Extend extable functionality
x86/entry_32: Remove .fixup usage
x86/entry_64: Remove .fixup usage
x86/copy_mc_64: Remove .fixup usage
...
- amba bus irq rework
- add kfence support
- support for Cortex M33 and M55 CPUs
- kbuild updates for decompressor
- let core code manage thread_info::cpu
- avoid unpredictable NOP encoding in decompressor
- reduce information printed in calltraces
-----BEGIN PGP SIGNATURE-----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=Pvr1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- amba bus irq rework
- add kfence support
- support for Cortex M33 and M55 CPUs
- kbuild updates for decompressor
- let core code manage thread_info::cpu
- avoid unpredictable NOP encoding in decompressor
- reduce information printed in calltraces
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: reduce the information printed in call traces
ARM: 9168/1: Add support for Cortex-M55 processor
ARM: 9167/1: Add support for Cortex-M33 processor
ARM: 9166/1: Support KFENCE for ARM
ARM: 9165/1: mm: Provide is_write_fault()
ARM: 9164/1: mm: Provide set_memory_valid()
ARM: 9163/1: amba: Move of_amba_device_decode_irq() into amba_probe()
ARM: 9162/1: amba: Kill sysfs attribute file of irq
ARM: 9161/1: mm: mark private VM_FAULT_X defines as vm_fault_t
ARM: 9159/1: decompressor: Avoid UNPREDICTABLE NOP encoding
ARM: 9158/1: leave it to core code to manage thread_info::cpu
ARM: 9154/1: decompressor: do not copy source files while building
- Fix lpa and lpa_user defines (John David Anglin)
- Fix symbol lookup of init functions with an __is_kernel() fix (Helge Deller)
- Fix wrong pdc_toc_pim_11 and pdc_toc_pim_20 definitions (Helge Deller)
- Add lws_atomic_xchg and lws_atomic_store syscalls (John David Anglin)
- Rewrite light-weight syscall and futex code (John David Anglin)
- Enable TOC (transfer of contents) feature unconditionally (Helge Deller)
- Improve fault handler messages (John David Anglin)
- Improve build process (Masahiro Yamada)
- Reduce kernel code footprint of user access functions (Helge Deller)
- Fix build error due to outX() macros (Bart Van Assche)
- Ue default_groups in kobj_type in pdc_stable (Greg Kroah-Hartman)
- Default to 16 CPUs on 32-bit kernel (Helge Deller)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYd1tRgAKCRD3ErUQojoP
X+k/AQDqGWQ+EQE15O+t9ZtluQVVRN30qeu3viSfutsj3DitOAEAvdzINTBakJ5N
Rm1Y6b3AZ3oCrjjRR0b2TuWvt+Uxew0=
=R+Ha
-----END PGP SIGNATURE-----
Merge tag 'for-5.17/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- Fix lpa and lpa_user defines (John David Anglin)
- Fix symbol lookup of init functions with an __is_kernel() fix (Helge
Deller)
- Fix wrong pdc_toc_pim_11 and pdc_toc_pim_20 definitions (Helge
Deller)
- Add lws_atomic_xchg and lws_atomic_store syscalls (John David Anglin)
- Rewrite light-weight syscall and futex code (John David Anglin)
- Enable TOC (transfer of contents) feature unconditionally (Helge
Deller)
- Improve fault handler messages (John David Anglin)
- Improve build process (Masahiro Yamada)
- Reduce kernel code footprint of user access functions (Helge Deller)
- Fix build error due to outX() macros (Bart Van Assche)
- Ue default_groups in kobj_type in pdc_stable (Greg Kroah-Hartman)
- Default to 16 CPUs on 32-bit kernel (Helge Deller)
* tag 'for-5.17/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Default to 16 CPUs on 32-bit kernel
sections: Fix __is_kernel() to include init ranges
parisc: Re-use toc_stack as hpmc_stack
parisc: Enable TOC (transfer of contents) feature unconditionally
parisc: io: Improve the outb(), outw() and outl() macros
parisc: pdc_stable: use default_groups in kobj_type
parisc: Add kgdb io_module to read chars via PDC
parisc: Fix pdc_toc_pim_11 and pdc_toc_pim_20 definitions
parisc: Add lws_atomic_xchg and lws_atomic_store syscalls
parisc: Rewrite light-weight syscall and futex code
parisc: Enhance page fault termination message
parisc: Don't call faulthandler_disabled() in do_page_fault()
parisc: Switch user access functions to signal errors in r29 instead of r8
parisc: Avoid calling faulthandler_disabled() twice
parisc: Fix lpa and lpa_user defines
parisc: Define depi_safe macro
parisc: decompressor: do not copy source files while building
things still showed up:
- A documentation section for ARC processors
- Reworked and enhanced KUnit documentation
- The ability to pick your own theme for HTML builds; if the default
"Read the Docs" theme isn't ugly enough for you, you can now pick
an uglier one.
- More Chinese translation work
Plus the usual assortment of fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmHcgvUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YCkcH/0d/bDbjkwh/6fFleHJDic+jasuoAk4HTpKn
G3dMvEHDzYm2uXJiCZTaxagUtP8S8BdZ1cMrThZ0zcCni30+awvCmq/puK2zo3G3
urofj9FfjTjKBLOb8GFnLCITzKVeWlSojtSj6cLbd/bbMX4eCEliis0KexEBrKpF
rmlY7qVr0WeBiW0Wg7xXjTd0H2dCO9O+5IQ/BzSPDJOzxyBWGLg0B/mXcm+BeOJ7
MukRtR7e2QcAw6MIxUI4tc2yoeG8XssNbbIrmcya1xwsSiAtcxHv3V2qCrJqmAx1
8mK1q4Mot9zGcOcBQWJoRwotRuS8wqH0jr+XgRbg12AwEZc66zg=
=oPyM
-----END PGP SIGNATURE-----
Merge tag 'docs-5.17' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This isn't a hugely busy cycle for documentation, but a few
significant things still showed up:
- A documentation section for ARC processors
- Reworked and enhanced KUnit documentation
- The ability to pick your own theme for HTML builds; if the default
"Read the Docs" theme isn't ugly enough for you, you can now pick
an uglier one.
- More Chinese translation work
Plus the usual assortment of fixes and cleanups"
* tag 'docs-5.17' of git://git.lwn.net/linux: (53 commits)
scripts: sphinx-pre-install: Fix ctex support on Debian
docs: discourage use of list tables
docs: 5.Posting.rst: describe Fixes: and Link: tags
Documentation: kgdb: Replace deprecated remotebaud
docs: automarkup.py: Fix invalid HTML link output and broken URI fragments
Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization
Documentation: kgdb: properly capitalize the MAGIC_SYSRQ config
docs/zh_CN: Update and fix a couple of typos
scripts: sphinx-pre-install: add required ctex dependency
Documentation: KUnit: Restyled Frequently Asked Questions
Documentation: KUnit: Restyle Test Style and Nomenclature page
Documentation: KUnit: Rework writing page to focus on writing tests
Documentation: kunit: Reorganize documentation related to running tests
Documentation: KUnit: Added KUnit Architecture
Documentation: KUnit: Rewrite getting started
Documentation: KUnit: Rewrite main page
docs/zh_CN: Add zh_CN/accounting/delay-accounting.rst
Documentation/sphinx: fix typos of "its"
docs/zh_CN: Add sched-domains translation
doc: fs: remove bdev_try_to_free_page related doc
...
This series provides KCSAN fixes and also the ability to take memory
barriers into account for weakly-ordered systems. This last can increase
the probability of detecting certain types of data races.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmHbuRwTHHBhdWxtY2tA
a2VybmVsLm9yZwAKCRCevxLzctn7jKDPEACWuzYnd/u/02AHyRd3PIF3Px9uFKlK
TFwaXX95oYSFCXcrmO42YtDUlZm4QcbwNb85KMCu1DvckRtIsNw0rkBU7BGyqv3Z
ZoJEfMNpmC0x9+IFBOeseBHySPVT0x7GmYus05MSh0OLfkbCfyImmxRzgoKJGL+A
ADF9EQb4z2feWjmVEoN8uRaarCAD4f77rSXiX6oTCNDuKrHarqMld/TmoXFrJbu2
QtfwHeyvraKBnZdUoYfVbGVenyKb1vMv4bUlvrOcuJEgIi/J/th4FupR3XCGYulI
aWJTl2TQTGnMoE8VnFHgI27I841w3k5PVL+Y1hr/S4uN1/rIoQQuBzCtlnFeCksa
BiBXsHIchN8N0Dwh8zD8NMd2uxV4t3fmpxXTDAwaOm7vs5hA8AJ0XNu6Sz94Lyjv
wk2CxX41WWUNJVo3gh6SrS4mL6lC8+VvHF1hbIap++jrevj58gj1jAR1fdx4ANlT
e2qA00EeoMngEogDNZH42/Fxs3H9zxrBta2ZbkPkwzIqTHH+4pIQDCy2xO3T3oxc
twdGPYpjYdkf79EGsG4I4R/VA/IfcS09VIWTce8xSDeSnqkgFhcG37r1orJe8hTB
tH+ODkNOsz5HaEoa8OoAL4ko2l0fL99p2AtMPpuQfHjRj7aorF+dJIrqCizASxwx
37PjQgOmHeDHgQ==
=Q5fg
-----END PGP SIGNATURE-----
Merge tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
"This provides KCSAN fixes and also the ability to take memory barriers
into account for weakly-ordered systems. This last can increase the
probability of detecting certain types of data races"
* tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
kcsan: Avoid nested contexts reading inconsistent reorder_access
kcsan: Turn barrier instrumentation into macros
kcsan: Make barrier tests compatible with lockdep
kcsan: Support WEAK_MEMORY with Clang where no objtool support exists
compiler_attributes.h: Add __disable_sanitizer_instrumentation
objtool, kcsan: Remove memory barrier instrumentation from noinstr
objtool, kcsan: Add memory barrier instrumentation to whitelist
sched, kcsan: Enable memory barrier instrumentation
mm, kcsan: Enable barrier instrumentation
x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock()
x86/barriers, kcsan: Use generic instrumentation for non-smp barriers
asm-generic/bitops, kcsan: Add instrumentation for barriers
locking/atomics, kcsan: Add instrumentation for barriers
locking/barriers, kcsan: Support generic instrumentation
locking/barriers, kcsan: Add instrumentation for barriers
kcsan: selftest: Add test case to check memory barrier instrumentation
kcsan: Ignore GCC 11+ warnings about TSan runtime support
kcsan: test: Add test cases for memory barrier instrumentation
kcsan: test: Match reordered or normal accesses
...
-----BEGIN PGP SIGNATURE-----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=k1A+
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Remove some twists in the console registration code. It does not
change the existing behavior except for one corner case. The proper
default console (with tty binding) will be registered again even when
it has been removed in the meantime. It is actually a bug fix.
Anyway, this modified behavior requires some manual interaction.
- Optimize gdb extension for huge ring buffers.
- Do not use atomic operations for a local bitmap variable.
- Update git links in MAINTAINERS.
* tag 'printk-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
MAINTAIERS/printk: Add link to printk git
MAINTAINERS/vsprintf: Update link to printk git tree
scripts/gdb: lx-dmesg: read records individually
printk/console: Clean up boot console handling in register_console()
printk/console: Remove need_default_console variable
printk/console: Remove unnecessary need_default_console manipulation
printk/console: Rename has_preferred_console to need_default_console
printk/console: Split out code that enables default console
vsprintf: Use non-atomic bitmap API when applicable
The previous commit fixed up all shell scripts to not include
include/config/auto.conf.
Now that include/config/auto.conf is only included by Makefiles,
we can change it into a more Make-friendly form.
Previously, Kconfig output string values enclosed with double-quotes
(both in the .config and include/config/auto.conf):
CONFIG_X="foo bar"
Unlike shell, Make handles double-quotes (and single-quotes as well)
verbatim. We must rip them off when used.
There are some patterns:
[1] $(patsubst "%",%,$(CONFIG_X))
[2] $(CONFIG_X:"%"=%)
[3] $(subst ",,$(CONFIG_X))
[4] $(shell echo $(CONFIG_X))
These are not only ugly, but also fragile.
[1] and [2] do not work if the value contains spaces, like
CONFIG_X=" foo bar "
[3] does not work correctly if the value contains double-quotes like
CONFIG_X="foo\"bar"
[4] seems to work better, but has a cost of forking a process.
Anyway, quoted strings were always PITA for our Makefiles.
This commit changes Kconfig to stop quoting in include/config/auto.conf.
These are the string type symbols referenced in Makefiles or scripts:
ACPI_CUSTOM_DSDT_FILE
ARC_BUILTIN_DTB_NAME
ARC_TUNE_MCPU
BUILTIN_DTB_SOURCE
CC_IMPLICIT_FALLTHROUGH
CC_VERSION_TEXT
CFG80211_EXTRA_REGDB_KEYDIR
EXTRA_FIRMWARE
EXTRA_FIRMWARE_DIR
EXTRA_TARGETS
H8300_BUILTIN_DTB
INITRAMFS_SOURCE
LOCALVERSION
MODULE_SIG_HASH
MODULE_SIG_KEY
NDS32_BUILTIN_DTB
NIOS2_DTB_SOURCE
OPENRISC_BUILTIN_DTB
SOC_CANAAN_K210_DTB_SOURCE
SYSTEM_BLACKLIST_HASH_LIST
SYSTEM_REVOCATION_KEYS
SYSTEM_TRUSTED_KEYS
TARGET_CPU
UNUSED_KSYMS_WHITELIST
XILINX_MICROBLAZE0_FAMILY
XILINX_MICROBLAZE0_HW_VER
XTENSA_VARIANT_NAME
I checked them one by one, and fixed up the code where necessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Richard Weinberger pointed out the risk of sourcing the kernel config
from shell scripts [1], and proposed some patches [2], [3]. It is a good
point, but it took a long time because I was wondering how to fix this.
This commit goes with simple grep approach because there are only a few
scripts including the kernel configuration.
scripts/link_vmlinux.sh has references to a bunch of CONFIG options,
all of which are boolean. I added is_enabled() helper as
scripts/package/{mkdebian,builddeb} do.
scripts/gen_autoksyms.sh uses 'eval', stating "to expand the whitelist
path". I removed it since it is the issue we are trying to fix.
I was a bit worried about the cost of invoking the grep command over
again. I extracted the grep parts from it, and measured the cost. It
was approximately 0.03 sec, which I hope is acceptable.
[test code]
$ cat test-grep.sh
#!/bin/sh
is_enabled() {
grep -q "^$1=y" include/config/auto.conf
}
is_enabled CONFIG_LTO_CLANG
is_enabled CONFIG_LTO_CLANG
is_enabled CONFIG_STACK_VALIDATION
is_enabled CONFIG_UNWINDER_ORC
is_enabled CONFIG_FTRACE_MCOUNT_USE_OBJTOOL
is_enabled CONFIG_VMLINUX_VALIDATION
is_enabled CONFIG_FRAME_POINTER
is_enabled CONFIG_GCOV_KERNEL
is_enabled CONFIG_LTO_CLANG
is_enabled CONFIG_RETPOLINE
is_enabled CONFIG_X86_SMAP
is_enabled CONFIG_LTO_CLANG
is_enabled CONFIG_VMLINUX_MAP
is_enabled CONFIG_KALLSYMS_ALL
is_enabled CONFIG_KALLSYMS_ABSOLUTE_PERCPU
is_enabled CONFIG_KALLSYMS_BASE_RELATIVE
is_enabled CONFIG_DEBUG_INFO_BTF
is_enabled CONFIG_KALLSYMS
is_enabled CONFIG_DEBUG_INFO_BTF
is_enabled CONFIG_BPF
is_enabled CONFIG_BUILDTIME_TABLE_SORT
is_enabled CONFIG_KALLSYMS
$ time ./test-grep.sh
real 0m0.036s
user 0m0.027s
sys m0.009s
[1]: https://lore.kernel.org/all/1919455.eZKeABUfgV@blindfold/
[2]: https://lore.kernel.org/all/20180219092245.26404-1-richard@nod.at/
[3]: https://lore.kernel.org/all/20210920213957.1064-2-richard@nod.at/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
The complex macro, config_filename, was introduced to do:
[1] drop double-quotes from the string value
[2] add $(srctree)/ prefix in case the file is not found in $(objtree)
[3] escape spaces and more
[1] will be more generally handled by Kconfig later.
As for [2], Kbuild uses VPATH to search for files in $(objtree),
$(srctree) in this order. GNU Make can natively handle it.
As for [3], converting $(space) to $(space_escape) back and forth looks
questionable to me. It is well-known that GNU Make cannot handle file
paths with spaces in the first place.
Instead of using the complex macro, use $< so it will be expanded to
the file path of the key.
Remove config_filename, finally.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Toward the goal of removing the config_filename macro, drop
the double-quotes and add $(srctree)/ prefix in an ad hoc way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
This script is only used by usr/include/Makefile. Make it local to
the directory.
Update the comment in include/uapi/linux/soundcard.h because
'make headers_check' is no longer functional.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is a riscv port of commit d6e2cc5647 ("arm64: extable: add `type`
and `data` fields").
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Similar as other architectures such as arm64, x86 and so on, use
offsets relative to the exception table entry values rather than
absolute addresses for both the exception locationand the fixup.
However, RISCV label difference will actually produce two relocations,
a pair of R_RISCV_ADD32 and R_RISCV_SUB32. Take below simple code for
example:
$ cat test.S
.section .text
1:
nop
.section __ex_table,"a"
.balign 4
.long (1b - .)
.previous
$ riscv64-linux-gnu-gcc -c test.S
$ riscv64-linux-gnu-readelf -r test.o
Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries:
Offset Info Type Sym. Value Sym. Name + Addend
000000000000 000600000023 R_RISCV_ADD32 0000000000000000 .L1^B1 + 0
000000000000 000500000027 R_RISCV_SUB32 0000000000000000 .L0 + 0
The modpost will complain the R_RISCV_SUB32 relocation, so we need to
patch modpost.c to skip this relocation for .rela__ex_table section.
After this patch, the __ex_table section size of defconfig vmlinux is
reduced from 7072 Bytes to 3536 Bytes.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The format of the arm64 and x86 exception table entries is essentially
the same as of commits:
46d28947d9 ("x86/extable: Rework the exception table mechanics")
d6e2cc5647 ("arm64: extable: add `type` and `data` fields")
Both use a 12-byte entry consisting of two 32-bit relative offsets and
32 bits of (absolute) data, and their sort functions are identical aside
from commentary, with arm64 saying:
/* Don't touch the fixup type or data */
... and x86 saying:
/* Don't touch the fixup type */
Unify the two behind a common sort_relative_table_with_data() function,
retaining the arm64 commentary.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
As commit 7ae4a78daa ("ARM: 8969/1: decompressor: simplify libfdt
builds") stated, copying source files during the build time may not
end up with as clean code as expected.
Do similar for parisc to clean up the Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Commit 85bf17b28f ("recordmcount.pl: look for jgnop instruction as well
as bcrl on s390") added a new alternative mnemonic for the existing brcl
instruction. This is required for the combination old gcc version (pre 9.0)
and binutils since version 2.37.
However at the same time this commit introduced a typo, replacing brcl with
bcrl. As a result no mcount locations are detected anymore with old gcc
versions (pre 9.0) and binutils before version 2.37.
Fix this by using the correct mnemonic again.
Reported-by: Miroslav Benes <mbenes@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 85bf17b28f ("recordmcount.pl: look for jgnop instruction as well as bcrl on s390")
Link: https://lore.kernel.org/r/alpine.LSU.2.21.2112230949520.19849@pobox.suse.cz
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
As commit 7ae4a78daa ("ARM: 8969/1: decompressor: simplify libfdt
builds") stated, copying source files during the build time may not
end up with as clean code as expected.
Do similar for the other library files for further cleanups of the
Makefile and .gitignore.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
For the gdb command lx-dmesg, the entire descriptor, info, and text
data regions are read into memory before printing any records. For
large kernel log buffers, this not only causes a huge delay before
seeing any records, but it may also lead to python errors of too
much memory allocation.
Rather than reading in all these regions in advance, read them as
needed and only read the regions for the particular record that is
being printed.
The gdb macro "dmesg" in Documentation/admin-guide/kdump/gdbmacros.txt
already prints out the kernel log buffer like this.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/874k79c3a9.fsf@jogness.linutronix.de
On s390, recordmcount.pl is looking for "bcrl 0,<xxx>" instructions in
the objdump -d outpout. However since binutils 2.37, objdump -d
display "jgnop <xxx>" for the same instruction. Update the
mcount_regex so that it accepts both.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211210093827.1623286-1-jmarchan@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Adds the required KCSAN instrumentation for barriers of atomics.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
GCC 11 has introduced a new warning option, -Wtsan [1], to warn about
unsupported operations in the TSan runtime. But KCSAN != TSan runtime,
so none of the warnings apply.
[1] https://gcc.gnu.org/onlinedocs/gcc-11.1.0/gcc/Warning-Options.html
Ignore the warnings.
Currently the warning only fires in the test for __atomic_thread_fence():
kernel/kcsan/kcsan_test.c: In function ‘test_atomic_builtins’:
kernel/kcsan/kcsan_test.c🔢17: warning: ‘atomic_thread_fence’ is not supported with ‘-fsanitize=thread’ [-Wtsan]
1234 | __atomic_thread_fence(__ATOMIC_SEQ_CST);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
which exists to ensure the KCSAN runtime keeps supporting the builtin
instrumentation.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Source files that disable KCSAN via KCSAN_SANITIZE := n, remove all
instrumentation, including explicit barrier instrumentation. With
instrumentation for memory barriers, in few places it is required to
enable just the explicit instrumentation for memory barriers to avoid
false positives.
Providing the Makefile variable KCSAN_INSTRUMENT_BARRIERS_obj.o or
KCSAN_INSTRUMENT_BARRIERS (for all files) set to 'y' only enables the
explicit barrier instrumentation.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add support for modeling a subset of weak memory, which will enable
detection of a subset of data races due to missing memory barriers.
KCSAN's approach to detecting missing memory barriers is based on
modeling access reordering, and enabled if `CONFIG_KCSAN_WEAK_MEMORY=y`,
which depends on `CONFIG_KCSAN_STRICT=y`. The feature can be enabled or
disabled at boot and runtime via the `kcsan.weak_memory` boot parameter.
Each memory access for which a watchpoint is set up, is also selected
for simulated reordering within the scope of its function (at most 1
in-flight access).
We are limited to modeling the effects of "buffering" (delaying the
access), since the runtime cannot "prefetch" accesses (therefore no
acquire modeling). Once an access has been selected for reordering, it
is checked along every other access until the end of the function scope.
If an appropriate memory barrier is encountered, the access will no
longer be considered for reordering.
When the result of a memory operation should be ordered by a barrier,
KCSAN can then detect data races where the conflict only occurs as a
result of a missing barrier due to reordering accesses.
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
LLVM versions prior to 11.0.0 have a harder time with dead code
elimination, which can cause issues with commonly used expressions such
as BUILD_BUG_ON and the bitmask functions/macros in bitfield.h (see the
first two issues links below).
Whenever there is an issue within LLVM that has been resolved in a later
release, the only course of action is to gate the problematic
configuration or source code on the toolchain verson or raise the
minimum supported version of LLVM for building the kernel, as LLVM has a
limited support lifetime compared to GCC. GCC major releases will
typically see a few point releases across a two year period on average
whereas LLVM major releases are only supported until the next major
release and will only see one or two point releases within that
timeframe. For example, GCC 8.1 was released in May 2018 and GCC 8.5 was
released in May 2021, whereas LLVM 12.0.0 was released in April 2021 and
its only point release, 12.0.1, was released in July 2021, giving a
minimal window for fixes to be backported.
To resolve these build errors around improper dead code elimination,
raise the minimum supported version of LLVM for building the kernel to
11.0.0. Doing so is a more proper solution than mucking around with core
kernel macros that have always worked with GCC or disabling drivers for
using these macros in a proper manner. This type of issue may continue
to crop up and require patching, which creates more debt for bumping the
minimum supported version in the future.
This should have a minimal impact to distributions. Using a script to
pull several different Docker images and check the output of
'clang --version':
archlinux:latest: clang version 13.0.0
debian:oldoldstable-slim: clang version 3.8.1-24 (tags/RELEASE_381/final)
debian:oldstable-slim: clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
debian:stable-slim: Debian clang version 11.0.1-2
debian:testing-slim: Debian clang version 11.1.0-4
debian:unstable-slim: Debian clang version 11.1.0-4
fedora:34: clang version 12.0.1 (Fedora 12.0.1-1.fc34)
fedora:latest: clang version 13.0.0 (Fedora 13.0.0-3.fc35)
fedora:rawhide: clang version 13.0.0 (Fedora 13.0.0-5.fc36)
opensuse/leap:15.2: clang version 9.0.1
opensuse/leap:latest: clang version 11.0.1
opensuse/tumbleweed:latest: clang version 13.0.0
ubuntu:bionic: clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
ubuntu:latest: clang version 10.0.0-4ubuntu1
ubuntu:hirsute: Ubuntu clang version 12.0.0-3ubuntu1~21.04.2
ubuntu:rolling: Ubuntu clang version 13.0.0-2
ubuntu:devel: Ubuntu clang version 13.0.0-9
In every case, the distribution's version of clang is either older than
the current minimum supported version of LLVM 10.0.1 or equal to or
greater than the proposed 11.0.0 so nothing should change.
Another benefit of this change is LLVM=1 works better with arm64 and
x86_64 since commit f12b034afe ("scripts/Makefile.clang: default to
LLVM_IAS=1") enabled the integrated assembler by default, which only
works well with clang 11+ (clang-10 required it to be disabled to
successfully build a kernel).
Link: https://github.com/ClangBuiltLinux/linux/issues/1293
Link: https://github.com/ClangBuiltLinux/linux/issues/1506
Link: https://github.com/ClangBuiltLinux/linux/issues/1511
Link: fa496ce3c6
Link: https://groups.google.com/g/clang-built-linux/c/mPQb9_ZWW0s/m/W7o6S-QTBAAJ
Link: https://github.com/ClangBuiltLinux/misc-scripts
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When converting a modular kernel to a monolithic kernel, once the kernel
works without loading any modules, this helps to quickly disable all the
modules before turning off module support entirely.
Refactor conf_rewrite_mod_or_yes to a more general
conf_rewrite_tristates that accepts an old and new state.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When "make tags", it prompts a warning:
ctags: Warning: drivers/pci/controller/pcie-apple.c:150:
null expansion of name pattern "\1"
The reason is that there is an indentation beside arguments of
DECLARE_BITMAP, but it can parsed normally by gtags. It's also
allowed in C.
Regex [:space:] can match any white space character, so it's a
better approach to add it to each item in regex_c.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Zhaoyu Liu <zackary.liu.pro@gmail.com>
Link: https://lore.kernel.org/r/20211103152234.GA23295@pc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull HID fixes from Jiri Kosina:
- fix for Intel-ISH driver to make sure it gets aoutoloaded only on
matching devices and not universally (Thomas Weißschuh)
- fix for Wacom driver reporting invalid contact under certain
circumstances (Jason Gerecke)
- probing fix for ft260 dirver (Michael Zaidman)
- fix for generic keycode remapping (Thomas Weißschuh)
- fix for division by zero in hid-magicmouse (Claudia Pellegrino)
- other tiny assorted fixes and new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Fix Iiyama ProLite T1931SAW (0eef:0001 again!)
HID: nintendo: eliminate dead datastructures in !CONFIG_NINTENDO_FF case
HID: magicmouse: prevent division by 0 on scroll
HID: thrustmaster: fix sparse warnings
HID: Ignore battery for Elan touchscreen on HP Envy X360 15-eu0xxx
HID: input: set usage type to key on keycode remap
HID: input: Fix parsing of HID_CP_CONSUMER_CONTROL fields
HID: ft260: fix i2c probing for hwmon devices
Revert "HID: hid-asus.c: Maps key 0x35 (display off) to KEY_SCREENLOCK"
HID: intel-ish-hid: fix module device-id handling
mod_devicetable: fix kdocs for ishtp_device_id
HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
HID: nintendo: unlock on error in joycon_leds_create()
platform/x86: isthp_eclite: only load for matching devices
platform/chrome: chros_ec_ishtp: only load for matching devices
HID: intel-ish-hid: hid-client: only load for matching devices
HID: intel-ish-hid: fw-loader: only load for matching devices
HID: intel-ish-hid: use constants for modaliases
HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()
Update MAINTAINERS information (mailing list, web page, etc).
Add a semantic patch from Wen Yang to check for do_div calls that may
cause truncation, motivated by
commit b0ab99e773 ("sched: Fix possible divide by zero in avg_atom() calculation")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
-----BEGIN PGP SIGNATURE-----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=vMjw
-----END PGP SIGNATURE-----
Merge tag 'coccinelle-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
- Update MAINTAINERS information (mailing list, web page, etc).
- Add a semantic patch from Wen Yang to check for do_div calls that may
cause truncation, motivated by commit b0ab99e773 ("sched: Fix
possible divide by zero in avg_atom() calculation")
* tag 'coccinelle-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
coccinelle: update Coccinelle entry
coccinelle: semantic patch to check for inappropriate do_div() calls
As commit 7ae4a78daa ("ARM: 8969/1: decompressor: simplify libfdt
builds") stated, copying source files during the build time may not
end up with as clean code as expected.
Do similar for mips to clean up the Makefile and .gitignore.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
This is related to two previous changes. Commit dfe4529ee4
("scripts/gdb: find vmlinux where it was before") and commit da036ae147
("scripts/gdb: handle split debug").
Although Chrome OS has been using the debug suffix for modules for a
while, it has just recently started using it for vmlinux as well. That
means we've now got to improve the detection of "vmlinux" to also handle
that it might end with ".debug".
Link: https://lkml.kernel.org/r/20211028151120.v2.1.Ie6bd5a232f770acd8c9ffae487a02170bad3e963@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The standard location of dictionary.txt is under codespell's package, on
my machine atm (codespell 2.1, Artix Linux):
/usr/lib/python3.9/site-packages/codespell_lib/data/dictionary.txt
Since we enable the codespell by default for SOF I have constant:
No codespell typos will be found - file '/usr/share/codespell/dictionary.txt': No such file or directory
The patch proposes to try to fix up the path following the
recommendation found here:
https://github.com/codespell-project/codespell/issues/1540
Link: https://lkml.kernel.org/r/29e25d1364c8ad7f7657cc0660f60c568074d438.camel@perches.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The EXPORT_SYMBOL test expects a single argument but definitions of
EXPORT_SYMBOL_NS have multiple arguments.
Update the test to extract only the first argument from any
EXPORT_SYMBOL related definition.
Link: https://lkml.kernel.org/r/9e8f251b42e405f460f26a23ba9b33ef45a94adc.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Ian Pilcher <arequipeno@gmail.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a couple of commonly used (>50 instances) sound ops structs that are
typically const.
Link: https://lkml.kernel.org/r/20210922211042.38017-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allows to selectively autoload drivers for ISH devices.
Currently all ISH drivers are loaded for all systems having any ISH
device.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate
a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=ATFN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
generate a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
kbuild: use more subdir- for visiting subdirectories while cleaning
sh: remove meaningless archclean line
initramfs: Check timestamp to prevent broken cpio archive
kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
gen_init_cpio: add static const qualifiers
kbuild: Add make tarzst-pkg build option
scripts: update the comments of kallsyms support
sparc: Add missing "FORCE" target when using if_changed
kconfig: refactor conf_touch_dep()
kconfig: refactor conf_write_dep()
kconfig: refactor conf_write_autoconf()
kconfig: add conf_get_autoheader_name()
kconfig: move sym_escape_string_value() to confdata.c
kconfig: refactor listnewconfig code
kconfig: refactor conf_write_symbol()
kconfig: refactor conf_write_heading()
kconfig: remove 'const' from the return type of sym_escape_string_value()
kconfig: rename a variable in the lexer to a clearer name
kconfig: narrow the scope of variables in the lexer
kconfig: Create links to main menu items in search
...
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
GCC and Clang can use the "alloc_size" attribute to better inform the
results of __builtin_object_size() (for compile-time constant values).
Clang can additionally use alloc_size to inform the results of
__builtin_dynamic_object_size() (for run-time values).
Because GCC sees the frequent use of struct_size() as an allocator size
argument, and notices it can return SIZE_MAX (the overflow indication),
it complains about these call sites overflowing (since SIZE_MAX is
greater than the default -Walloc-size-larger-than=PTRDIFF_MAX). This
isn't helpful since we already know a SIZE_MAX will be caught at
run-time (this was an intentional design). To deal with this, we must
disable this check as it is both a false positive and redundant. (Clang
does not have this warning option.)
Unfortunately, just checking the -Wno-alloc-size-larger-than is not
sufficient to make the __alloc_size attribute behave correctly under
older GCC versions. The attribute itself must be disabled in those
situations too, as there appears to be no way to reliably silence the
SIZE_MAX constant expression cases for GCC versions less than 9.1:
In file included from ./include/linux/resource_ext.h:11,
from ./include/linux/pci.h:40,
from drivers/net/ethernet/intel/ixgbe/ixgbe.h:9,
from drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c:4:
In function 'kmalloc_node',
inlined from 'ixgbe_alloc_q_vector' at ./include/linux/slab.h:743:9:
./include/linux/slab.h:618:9: error: argument 1 value '18446744073709551615' exceeds maximum object size 9223372036854775807 [-Werror=alloc-size-larger-than=]
return __kmalloc_node(size, flags, node);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/slab.h: In function 'ixgbe_alloc_q_vector':
./include/linux/slab.h:455:7: note: in a call to allocation function '__kmalloc_node' declared here
void *__kmalloc_node(size_t size, gfp_t flags, int node) __assume_slab_alignment __malloc;
^~~~~~~~~~~~~~
Specifically:
'-Wno-alloc-size-larger-than' is not correctly handled by GCC < 9.1
https://godbolt.org/z/hqsfG7q84 (doesn't disable)
https://godbolt.org/z/P9jdrPTYh (doesn't admit to not knowing about option)
https://godbolt.org/z/465TPMWKb (only warns when other warnings appear)
'-Walloc-size-larger-than=18446744073709551615' is not handled by GCC < 8.2
https://godbolt.org/z/73hh1EPxz (ignores numeric value)
Since anything marked with __alloc_size would also qualify for marking
with __malloc, just include __malloc along with it to avoid redundant
markings. (Suggested by Linus Torvalds.)
Finally, make sure checkpatch.pl doesn't get confused about finding the
__alloc_size attribute on functions. (Thanks to Joe Perches.)
Link: https://lkml.kernel.org/r/20210930222704.2631604-3-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jing Xiangfeng <jingxiangfeng@huawei.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If opps.file is in DOS format, faulting instruction cannot be printed:
/ # ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
/ # ./scripts/decodecode < oops.file
[ 0.734345] Code: d0002881 912f9c21 94067e68 d2800001 (b900003f)
aarch64-linux-gnu-strip: '/tmp/tmp.5Y9eybnnSi.o': No such file
aarch64-linux-gnu-objdump: '/tmp/tmp.5Y9eybnnSi.o': No such file
All code
========
0: d0002881 adrp x1, 0x512000
4: 912f9c21 add x1, x1, #0xbe7
8: 94067e68 bl 0x19f9a8
c: d2800001 mov x1, #0x0 // #0
10: b900003f str wzr, [x1]
Code starting with the faulting instruction
===========================================
Background: The compilation environment is Ubuntu, and the test
environment is Windows. Most logs are generated in the Windows
environment. In this way, CR (carriage return) will inevitably appear,
which will affect the use of decodecode in the Ubuntu environment.
The repaired effect is as follows:
/ # ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
/ # ./scripts/decodecode < oops.file
[ 0.734345] Code: d0002881 912f9c21 94067e68 d2800001 (b900003f)
All code
========
0: d0002881 adrp x1, 0x512000
4: 912f9c21 add x1, x1, #0xbe7
8: 94067e68 bl 0x19f9a8
c: d2800001 mov x1, #0x0 // #0
10:* b900003f str wzr, [x1] <-- trapping instruction
Code starting with the faulting instruction
===========================================
0: b900003f str wzr, [x1]
Link: https://lkml.kernel.org/r/20211008064712.926-1-weidonghui@allwinnertech.com
Signed-off-by: weidonghui <weidonghui@allwinnertech.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Marc Zyngier <maz@misterjones.org>
Cc: Will Deacon <will@kernel.org>
Cc: Rabin Vincent <rabin@rab.in>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If both "mistake" version and "correction" version are the same, a
warning message is created by checkpatch which is impossible to fix.
But it was noticed that Colan Ian King created a commit e6c0a0889b
("ALSA: aloop: Fix spelling mistake "synchronization" ->
"synchronization"") which suggests that this spelling mistake was fixed
by replacing the word "synchronization" with itself. But the actual
diff shows that the mistake in the code was "sychronization". It is
rather likely that the "mistake" in spelling.txt should have been the
latter.
Link: https://lkml.kernel.org/r/20210926065529.6880-1-sven@narfation.org
Fixes: 2e74c9433ba8 ("scripts/spelling.txt: add more spellings to spelling.txt")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some of the more common spelling mistakes and typos that I've found
while fixing up spelling mistakes in the kernel in the past few months.
Link: https://lkml.kernel.org/r/20210907072941.7033-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files
and scripts from Mauro. We are almost at the place where we
can properly check that the running kernel's sysfs abi is
documented fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPbjQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ync9gCfXKMUI1GAnCfJWAwTdTcd18q5akoAoMw32/AH
0yh5TjAWFyFd7xz5d7qs
=itsC
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files and
scripts from Mauro. We are almost at the place where we can
properly check that the running kernel's sysfs abi is documented
fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes"
* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
device property: Drop redundant NULL checks
x86/build: Tuck away built-in firmware under FW_LOADER
vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
firmware_loader: move struct builtin_fw to the only place used
x86/microcode: Use the firmware_loader built-in API
firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
firmware_loader: formalize built-in firmware API
component: do not leave master devres group open after bind
dyndbg: refine verbosity 1-4 summary-detail
gpiolib: acpi: Replace custom code with device_match_acpi_handle()
i2c: acpi: Replace custom function with device_match_acpi_handle()
driver core: Provide device_match_acpi_handle() helper
dyndbg: fix spurious vNpr_info change
dyndbg: no vpr-info on empty queries
dyndbg: vpr-info on remove-module complete, not starting
device property: Add missed header in fwnode.h
Documentation: dyndbg: Improve cli param examples
dyndbg: Remove support for ddebug_query param
dyndbg: make dyndbg a known cli param
dyndbg: show module in vpr-info in dd-exec-queries
...
Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage,
reviewed and acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by
the hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in
arm64 for allmodconfig, but that change is on its way through
the drm tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPX2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUUgCbB4EKysgLuXYdjUalZDx+vvZO4k0AniS14O4k
F+2dVSZ5WX6wumUzCaA6
=bXQM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP ESP8089,
tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and boards,
and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
-----BEGIN PGP SIGNATURE-----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=dQa6
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
boards, and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
dt-bindings: net: ti,bluetooth: Document default max-speed
dt-bindings: pci: rcar-pci-ep: Document r8a7795
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
of: unittest: document intentional interrupt-map provider build warning
of: unittest: fix EXPECT text for gpio hog errors
of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
dt-bindings: display: tilcd: Fix endpoint addressing in example
dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
dt-bindings: ufs: exynos-ufs: add io-coherency property
dt-bindings: mips: convert Ralink SoCs and boards to schema
dt-bindings: display: xilinx: Fix example with psgtr
dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
dt-bindings: Add a help message when dtschema tools are missing
dt-bindings: bus: ti-sysc: Update to use yaml binding
dt-bindings: sram: Allow numbers in sram region node name
dt-bindings: display: Document the Xylon LogiCVC display controller
...
- Some small scripts/kerneldoc fixes
- More Chinese translation work, but at a much reduced rate.
- The tip-tree maintainer's handbook
...plus the usual array of build fixes, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmGBqbYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YzMoH+wQwUbILvf4FB9h6l0qhbPnvcLMJtDiuIGSu
Ivfc1t+Vh7/waehaYfn9erCNps6oE13Arsy0DDFZcr6vbjXFO5clFoh5jvSJsk+G
zTXzZNB99SoJcZw9r8F7aJDbQNJfSXoyTTOg1mSeXNo+nkBFTSWO7QwCx5M2obaT
76+r8HQpnEYmrGePsOXriV4aOP+yJxuGgkPb+VPlPtQhA7v6dzo5hmoh5tPIzCLd
Fz8ek4aAm9sPEtu1UUoA+7MALZHTFwPv6aSAuyVeNfF/UBL6M4iAwusQyLdPFfoj
JPO7f+1h6a8jKTfTWGjPI3o33DtU/8nc6DgnuBaXBTKW8Dl5Exk=
=q37Q
-----END PGP SIGNATURE-----
Merge tag 'docs-5.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This is a relatively unexciting cycle for documentation.
- Some small scripts/kerneldoc fixes
- More Chinese translation work, but at a much reduced rate.
- The tip-tree maintainer's handbook
...plus the usual array of build fixes, typo fixes, etc"
* tag 'docs-5.16' of git://git.lwn.net/linux: (53 commits)
kernel-doc: support DECLARE_PHY_INTERFACE_MASK()
docs/zh_CN: add core-api xarray translation
docs/zh_CN: add core-api assoc_array translation
speakup: Fix typo in documentation "boo" -> "boot"
docs: submitting-patches: make section about the Link: tag more explicit
docs: deprecated.rst: Clarify open-coded arithmetic with literals
scripts: documentation-file-ref-check: fix bpf selftests path
scripts: documentation-file-ref-check: ignore hidden files
coding-style.rst: trivial: fix location of driver model macros
docs: f2fs: fix text alignment
docs/zh_CN add PCI pci.rst translation
docs/zh_CN add PCI index.rst translation
docs: translations: zh_CN: memory-hotplug.rst: fix a typo
docs: translations: zn_CN: irq-affinity.rst: add a missing extension
block: add documentation for inflight
scripts: kernel-doc: Ignore __alloc_size() attribute
docs: pdfdocs: Adjust \headheight for fancyhdr
docs: UML: user_mode_linux_howto_v2 edits
docs: use the lore redirector everywhere
docs: proc.rst: mountinfo: align columns
...
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space
and avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace
to work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction,
by exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec
offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP
buffer pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
and Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we
can add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements
to CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=srde
-----END PGP SIGNATURE-----
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-11-01
We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).
The main changes are:
1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.
2) Parallelize bpf test_progs, from Yucong and Andrii.
3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.
4) Improve bpf selftests on s390, from Ilya.
5) bloomfilter bpf map type, from Joanne.
6) Big improvements to JIT tests especially on Mips, from Johan.
7) Support kernel module function calls from bpf, from Kumar.
8) Support typeless and weak ksym in light skeleton, from Kumar.
9) Disallow unprivileged bpf by default, from Pawan.
10) BTF_KIND_DECL_TAG support, from Yonghong.
11) Various bpftool cleanups, from Quentin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
bpf: Factor out helpers for ctx access checking
bpf: Factor out a helper to prepare trampoline for struct_ops prog
selftests, bpf: Fix broken riscv build
riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
tools, build: Add RISC-V to HOSTARCH parsing
riscv, bpf: Increase the maximum number of iterations
selftests, bpf: Add one test for sockmap with strparser
selftests, bpf: Fix test_txmsg_ingress_parser error
...
====================
Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using new PAHOLE_FLAGS variable to pass extra arguments to
pahole for both vmlinux and modules BTF data generation.
Adding new scripts/pahole-flags.sh script that detect and
prints pahole options.
[ fixed issues found by kernel test robot ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211029125729.70002-1-jolsa@kernel.org
The end goal of the current buffer overflow detection work[0] is to gain
full compile-time and run-time coverage of all detectable buffer overflows
seen via array indexing or memcpy(), memmove(), and memset(). The str*()
family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this series
contains the foundational elements of several related buffer overflow
detection improvements by providing new common helpers and FORTIFY_SOURCE
changes needed to gain the introspection required for compiler visibility
into array sizes. Also included are a handful of already Acked instances
using the helpers (or related clean-ups), with many more waiting at the
ready to be taken via subsystem-specific trees[2]. The new helpers are:
- struct_group() for gaining struct member range introspection.
- memset_after() and memset_startat() for clearing to the end of structures.
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs.
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage under
GCC, and to prepare to fix the currently broken Clang support. Finishing
this work is part of the larger series[0], but depends on all the false
positives and buffer overflow bug fixes to have landed already and those
that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time
and run-time tests are added for FORTIFY_SOURCE and the mem*()-family
functions respectively. The compile time tests have found a legitimate
(though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage that
result in no known object code differences.
After this series (and the changes that have now landed via netdev
and usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds. However, due corner cases in
GCC[3] and Clang[4], I have not included the last two patches that turn
on these options, as I don't want to introduce any known warnings to
the build. Hopefully these can be solved soon.
[0] https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE
[2] https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/
[3] https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/
[4] https://bugs.llvm.org/show_bug.cgi?id=51682
[5] https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/
[6] https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmGAFWcWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJmKFD/45MJdnvW5MhIEeW5tc5UjfcIPS
ae+YvlEX/2ZwgSlTxocFVocE6hz7b6eCiX3dSAChPkPxsSfgeiuhjxsU+4ROnELR
04RqTA/rwT6JXfJcXbDPXfxDL4huUkgktAW3m1sT771AZspeap2GrSwFyttlTqKA
+kTiZ3lXJVFcw10uyhfp3Lk6eFJxdf5iOjuEou5kBOQfpNKEOduRL2K15hSowOwB
lARiAC+HbmN+E+npvDE7YqK4V7ZQ0/dtB0BlfqgTkn1spQz8N21kBAMpegV5vvIk
A+qGHc7q2oyk4M14TRTidQHGQ4juW1Kkvq3NV6KzwQIVD+mIfz0ESn3d4tnp28Hk
Y+OXTI1BRFlApQU9qGWv33gkNEozeyqMLDRLKhDYRSFPA9UKkpgXQRzeTzoLKyrQ
4B6n5NnUGcu7I6WWhpyZQcZLDsHGyy0vHzjQGs/NXtb1PzXJ5XIGuPdmx9pVMykk
IVKnqRcWyGWahfh3asOnoXvdhi1No4NSHQ/ZHfUM+SrIGYjBMaUisw66qm3Fe8ZU
lbO2CFkCsfGSoKNPHf0lUEGlkyxAiDolazOfflDNxdzzlZo2X1l/a7O/yoO4Pqul
cdL0eDjiNoQ2YR2TSYPnXq5KSL1RI0tlfS8pH8k1hVhZsQx0wpAQ+qki0S+fLePV
PdA9XB82G2tmqKc9cQ==
=9xbT
-----END PGP SIGNATURE-----
Merge tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"The end goal of the current buffer overflow detection work[0] is to
gain full compile-time and run-time coverage of all detectable buffer
overflows seen via array indexing or memcpy(), memmove(), and
memset(). The str*() family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this
series contains the foundational elements of several related buffer
overflow detection improvements by providing new common helpers and
FORTIFY_SOURCE changes needed to gain the introspection required for
compiler visibility into array sizes. Also included are a handful of
already Acked instances using the helpers (or related clean-ups), with
many more waiting at the ready to be taken via subsystem-specific
trees[2].
The new helpers are:
- struct_group() for gaining struct member range introspection
- memset_after() and memset_startat() for clearing to the end of
structures
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
structs
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage
under GCC, and to prepare to fix the currently broken Clang support.
Finishing this work is part of the larger series[0], but depends on
all the false positives and buffer overflow bug fixes to have landed
already and those that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a
compile-time and run-time tests are added for FORTIFY_SOURCE and the
mem*()-family functions respectively. The compile time tests have
found a legitimate (though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage
that result in no known object code differences.
After this series (and the changes that have now landed via netdev and
usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds.
However, due corner cases in GCC[3] and Clang[4], I have not included
the last two patches that turn on these options, as I don't want to
introduce any known warnings to the build. Hopefully these can be
solved soon"
Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]
* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
fortify: strlen: Avoid shadowing previous locals
compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
treewide: Replace 0-element memcpy() destinations with flexible arrays
treewide: Replace open-coded flex arrays in unions
stddef: Introduce DECLARE_FLEX_ARRAY() helper
btrfs: Use memset_startat() to clear end of struct
string.h: Introduce memset_startat() for wiping trailing members and padding
xfrm: Use memset_after() to clear padding
string.h: Introduce memset_after() for wiping trailing members/padding
lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
fortify: Add compile-time FORTIFY_SOURCE tests
fortify: Allow strlen() and strnlen() to pass compile-time known lengths
fortify: Prepare to improve strnlen() and strlen() warnings
fortify: Fix dropped strcpy() compile-time write overflow check
fortify: Explicitly disable Clang support
fortify: Move remaining fortify helpers into fortify-string.h
lib/string: Move helper functions out of string.c
compiler_types.h: Remove __compiletime_object_size()
cm4000_cs: Use struct_group() to zero struct cm4000_dev region
can: flexcan: Use struct_group() to zero struct flexcan_regs regions
...
- Support for the Arm8.6 timer extensions, including a self-synchronising
view of the system registers to elide some expensive ISB instructions.
- Exception table cleanup and rework so that the fixup handlers appear
correctly in backtraces.
- A handful of miscellaneous changes, the main one being selection of
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.
- More mm and pgtable cleanups.
- KASAN support for "asymmetric" MTE, where tag faults are reported
synchronously for loads (via an exception) and asynchronously for
stores (via a register).
- Support for leaving the MMU enabled during kexec relocation, which
significantly speeds up the operation.
- Minor improvements to our perf PMU drivers.
- Improvements to the compat vDSO build system, particularly when
building with LLVM=1.
- Preparatory work for handling some Coresight TRBE tracing errata.
- Cleanup and refactoring of the SVE code to pave the way for SME
support in future.
- Ensure SCS pages are unpoisoned immediately prior to freeing them
when KASAN is enabled for the vmalloc area.
- Try moving to the generic pfn_valid() implementation again now that
the DMA mapping issue from last time has been resolved.
- Numerous improvements and additions to our FPSIMD and SVE selftests.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmF74ZYQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNI/eB/UZYAtmNi6xC5StPaETyMLeZph9BV/IqIFq
N71ds7MFzlX/agR6MwLbH2tBHezBtlQ90O732Jjz8zAec2cHd+7sx/w82JesX7PB
IuOfqP78rvtU4ZkKe1Rcd96QtYvbtNAqcRhIo95OzfV9xwuzkvdXI+ZTYhtCfCuZ
GozCqQoJtnNDayMtfzbDSXyJLNJc/qnIcUQhrt3vg12zbF3BcHxnmp0nBcHCqZEo
lDJYufju7p87kCzaFYda2WhlI3t+NThqKOiZ332wQfqzNcr+rw1Y4jWbnCfrdLtI
JfHT9yiuHDmFSYaJrk7NU8kftW31NV70bbhD7rZ+DQCVndl0lRc=
=3R3j
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's the usual summary below, but the highlights are support for
the Armv8.6 timer extensions, KASAN support for asymmetric MTE, the
ability to kexec() with the MMU enabled and a second attempt at
switching to the generic pfn_valid() implementation.
Summary:
- Support for the Arm8.6 timer extensions, including a
self-synchronising view of the system registers to elide some
expensive ISB instructions.
- Exception table cleanup and rework so that the fixup handlers
appear correctly in backtraces.
- A handful of miscellaneous changes, the main one being selection of
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.
- More mm and pgtable cleanups.
- KASAN support for "asymmetric" MTE, where tag faults are reported
synchronously for loads (via an exception) and asynchronously for
stores (via a register).
- Support for leaving the MMU enabled during kexec relocation, which
significantly speeds up the operation.
- Minor improvements to our perf PMU drivers.
- Improvements to the compat vDSO build system, particularly when
building with LLVM=1.
- Preparatory work for handling some Coresight TRBE tracing errata.
- Cleanup and refactoring of the SVE code to pave the way for SME
support in future.
- Ensure SCS pages are unpoisoned immediately prior to freeing them
when KASAN is enabled for the vmalloc area.
- Try moving to the generic pfn_valid() implementation again now that
the DMA mapping issue from last time has been resolved.
- Numerous improvements and additions to our FPSIMD and SVE
selftests"
[ armv8.6 timer updates were in a shared branch and already came in
through -tip in the timer pull - Linus ]
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
arm64: Select POSIX_CPU_TIMERS_TASK_WORK
arm64: Document boot requirements for FEAT_SME_FA64
arm64/sve: Fix warnings when SVE is disabled
arm64/sve: Add stub for sve_max_virtualisable_vl()
arm64: errata: Add detection for TRBE write to out-of-range
arm64: errata: Add workaround for TSB flush failures
arm64: errata: Add detection for TRBE overwrite in FILL mode
arm64: Add Neoverse-N2, Cortex-A710 CPU part definition
selftests: arm64: Factor out utility functions for assembly FP tests
arm64: vmlinux.lds.S: remove `.fixup` section
arm64: extable: add load_unaligned_zeropad() handler
arm64: extable: add a dedicated uaccess handler
arm64: extable: add `type` and `data` fields
arm64: extable: use `ex` for `exception_table_entry`
arm64: extable: make fixup_exception() return bool
arm64: extable: consolidate definitions
arm64: gpr-num: support W registers
arm64: factor out GPR numbering helpers
arm64: kvm: use kvm_exception_table_entry
arm64: lib: __arch_copy_to_user(): fold fixups into body
...
- Cleanup of extable fixup handling to be more robust, which in turn
allows to make the FPU exception fixups more robust as well.
- Change the return code for signal frame related failures from explicit
error codes to a boolean fail/success as that's all what the calling
code evaluates.
- A large refactoring of the FPU code to prepare for adding AMX support:
- Distangle the public header maze and remove especially the misnomed
kitchen sink internal.h which is despite it's name included all over
the place.
- Add a proper abstraction for the register buffer storage (struct
fpstate) which allows to dynamically size the buffer at runtime by
flipping the pointer to the buffer container from the default
container which is embedded in task_struct::tread::fpu to a
dynamically allocated container with a larger register buffer.
- Convert the code over to the new fpstate mechanism.
- Consolidate the KVM FPU handling by moving the FPU related code into
the FPU core which removes the number of exports and avoids adding
even more export when AMX has to be supported in KVM. This also
removes duplicated code which was of course unnecessary different and
incomplete in the KVM copy.
- Simplify the KVM FPU buffer handling by utilizing the new fpstate
container and just switching the buffer pointer from the user space
buffer to the KVM guest buffer when entering vcpu_run() and flipping
it back when leaving the function. This cuts the memory requirements
of a vCPU for FPU buffers in half and avoids pointless memory copy
operations.
This also solves the so far unresolved problem of adding AMX support
because the current FPU buffer handling of KVM inflicted a circular
dependency between adding AMX support to the core and to KVM. With
the new scheme of switching fpstate AMX support can be added to the
core code without affecting KVM.
- Replace various variables with proper data structures so the extra
information required for adding dynamically enabled FPU features (AMX)
can be added in one place
- Add AMX (Advanved Matrix eXtensions) support (finally):
AMX is a large XSTATE component which is going to be available with
Saphire Rapids XEON CPUs. The feature comes with an extra MSR (MSR_XFD)
which allows to trap the (first) use of an AMX related instruction,
which has two benefits:
1) It allows the kernel to control access to the feature
2) It allows the kernel to dynamically allocate the large register
state buffer instead of burdening every task with the the extra 8K
or larger state storage.
It would have been great to gain this kind of control already with
AVX512.
The support comes with the following infrastructure components:
1) arch_prctl() to
- read the supported features (equivalent to XGETBV(0))
- read the permitted features for a task
- request permission for a dynamically enabled feature
Permission is granted per process, inherited on fork() and cleared
on exec(). The permission policy of the kernel is restricted to
sigaltstack size validation, but the syscall obviously allows
further restrictions via seccomp etc.
2) A stronger sigaltstack size validation for sys_sigaltstack(2) which
takes granted permissions and the potentially resulting larger
signal frame into account. This mechanism can also be used to
enforce factual sigaltstack validation independent of dynamic
features to help with finding potential victims of the 2K
sigaltstack size constant which is broken since AVX512 support was
added.
3) Exception handling for #NM traps to catch first use of a extended
feature via a new cause MSR. If the exception was caused by the use
of such a feature, the handler checks permission for that
feature. If permission has not been granted, the handler sends a
SIGILL like the #UD handler would do if the feature would have been
disabled in XCR0. If permission has been granted, then a new fpstate
which fits the larger buffer requirement is allocated.
In the unlikely case that this allocation fails, the handler sends
SIGSEGV to the task. That's not elegant, but unavoidable as the
other discussed options of preallocation or full per task
permissions come with their own set of horrors for kernel and/or
userspace. So this is the lesser of the evils and SIGSEGV caused by
unexpected memory allocation failures is not a fundamentally new
concept either.
When allocation succeeds, the fpstate properties are filled in to
reflect the extended feature set and the resulting sizes, the
fpu::fpstate pointer is updated accordingly and the trap is disarmed
for this task permanently.
4) Enumeration and size calculations
5) Trap switching via MSR_XFD
The XFD (eXtended Feature Disable) MSR is context switched with the
same life time rules as the FPU register state itself. The mechanism
is keyed off with a static key which is default disabled so !AMX
equipped CPUs have zero overhead. On AMX enabled CPUs the overhead
is limited by comparing the tasks XFD value with a per CPU shadow
variable to avoid redundant MSR writes. In case of switching from a
AMX using task to a non AMX using task or vice versa, the extra MSR
write is obviously inevitable.
All other places which need to be aware of the variable feature sets
and resulting variable sizes are not affected at all because they
retrieve the information (feature set, sizes) unconditonally from
the fpstate properties.
6) Enable the new AMX states
Note, this is relatively new code despite the fact that AMX support is in
the works for more than a year now.
The big refactoring of the FPU code, which allowed to do a proper
integration has been started exactly 3 weeks ago. Refactoring of the
existing FPU code and of the original AMX patches took a week and has
been subject to extensive review and testing. The only fallout which has
not been caught in review and testing right away was restricted to AMX
enabled systems, which is completely irrelevant for anyone outside Intel
and their early access program. There might be dragons lurking as usual,
but so far the fine grained refactoring has held up and eventual yet
undetected fallout is bisectable and should be easily addressable before
the 5.16 release. Famous last words...
Many thanks to Chang Bae and Dave Hansen for working hard on this and
also to the various test teams at Intel who reserved extra capacity to
follow the rapid development of this closely which provides the
confidence level required to offer this rather large update for inclusion
into 5.16-rc1.
-----BEGIN PGP SIGNATURE-----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=x3WL
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
- Cleanup of extable fixup handling to be more robust, which in turn
allows to make the FPU exception fixups more robust as well.
- Change the return code for signal frame related failures from
explicit error codes to a boolean fail/success as that's all what the
calling code evaluates.
- A large refactoring of the FPU code to prepare for adding AMX
support:
- Distangle the public header maze and remove especially the
misnomed kitchen sink internal.h which is despite it's name
included all over the place.
- Add a proper abstraction for the register buffer storage (struct
fpstate) which allows to dynamically size the buffer at runtime
by flipping the pointer to the buffer container from the default
container which is embedded in task_struct::tread::fpu to a
dynamically allocated container with a larger register buffer.
- Convert the code over to the new fpstate mechanism.
- Consolidate the KVM FPU handling by moving the FPU related code
into the FPU core which removes the number of exports and avoids
adding even more export when AMX has to be supported in KVM.
This also removes duplicated code which was of course
unnecessary different and incomplete in the KVM copy.
- Simplify the KVM FPU buffer handling by utilizing the new
fpstate container and just switching the buffer pointer from the
user space buffer to the KVM guest buffer when entering
vcpu_run() and flipping it back when leaving the function. This
cuts the memory requirements of a vCPU for FPU buffers in half
and avoids pointless memory copy operations.
This also solves the so far unresolved problem of adding AMX
support because the current FPU buffer handling of KVM inflicted
a circular dependency between adding AMX support to the core and
to KVM. With the new scheme of switching fpstate AMX support can
be added to the core code without affecting KVM.
- Replace various variables with proper data structures so the
extra information required for adding dynamically enabled FPU
features (AMX) can be added in one place
- Add AMX (Advanced Matrix eXtensions) support (finally):
AMX is a large XSTATE component which is going to be available with
Saphire Rapids XEON CPUs. The feature comes with an extra MSR
(MSR_XFD) which allows to trap the (first) use of an AMX related
instruction, which has two benefits:
1) It allows the kernel to control access to the feature
2) It allows the kernel to dynamically allocate the large register
state buffer instead of burdening every task with the the extra
8K or larger state storage.
It would have been great to gain this kind of control already with
AVX512.
The support comes with the following infrastructure components:
1) arch_prctl() to
- read the supported features (equivalent to XGETBV(0))
- read the permitted features for a task
- request permission for a dynamically enabled feature
Permission is granted per process, inherited on fork() and
cleared on exec(). The permission policy of the kernel is
restricted to sigaltstack size validation, but the syscall
obviously allows further restrictions via seccomp etc.
2) A stronger sigaltstack size validation for sys_sigaltstack(2)
which takes granted permissions and the potentially resulting
larger signal frame into account. This mechanism can also be used
to enforce factual sigaltstack validation independent of dynamic
features to help with finding potential victims of the 2K
sigaltstack size constant which is broken since AVX512 support
was added.
3) Exception handling for #NM traps to catch first use of a extended
feature via a new cause MSR. If the exception was caused by the
use of such a feature, the handler checks permission for that
feature. If permission has not been granted, the handler sends a
SIGILL like the #UD handler would do if the feature would have
been disabled in XCR0. If permission has been granted, then a new
fpstate which fits the larger buffer requirement is allocated.
In the unlikely case that this allocation fails, the handler
sends SIGSEGV to the task. That's not elegant, but unavoidable as
the other discussed options of preallocation or full per task
permissions come with their own set of horrors for kernel and/or
userspace. So this is the lesser of the evils and SIGSEGV caused
by unexpected memory allocation failures is not a fundamentally
new concept either.
When allocation succeeds, the fpstate properties are filled in to
reflect the extended feature set and the resulting sizes, the
fpu::fpstate pointer is updated accordingly and the trap is
disarmed for this task permanently.
4) Enumeration and size calculations
5) Trap switching via MSR_XFD
The XFD (eXtended Feature Disable) MSR is context switched with
the same life time rules as the FPU register state itself. The
mechanism is keyed off with a static key which is default
disabled so !AMX equipped CPUs have zero overhead. On AMX enabled
CPUs the overhead is limited by comparing the tasks XFD value
with a per CPU shadow variable to avoid redundant MSR writes. In
case of switching from a AMX using task to a non AMX using task
or vice versa, the extra MSR write is obviously inevitable.
All other places which need to be aware of the variable feature
sets and resulting variable sizes are not affected at all because
they retrieve the information (feature set, sizes) unconditonally
from the fpstate properties.
6) Enable the new AMX states
Note, this is relatively new code despite the fact that AMX support
is in the works for more than a year now.
The big refactoring of the FPU code, which allowed to do a proper
integration has been started exactly 3 weeks ago. Refactoring of the
existing FPU code and of the original AMX patches took a week and has
been subject to extensive review and testing. The only fallout which
has not been caught in review and testing right away was restricted
to AMX enabled systems, which is completely irrelevant for anyone
outside Intel and their early access program. There might be dragons
lurking as usual, but so far the fine grained refactoring has held up
and eventual yet undetected fallout is bisectable and should be
easily addressable before the 5.16 release. Famous last words...
Many thanks to Chang Bae and Dave Hansen for working hard on this and
also to the various test teams at Intel who reserved extra capacity
to follow the rapid development of this closely which provides the
confidence level required to offer this rather large update for
inclusion into 5.16-rc1
* tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
Documentation/x86: Add documentation for using dynamic XSTATE features
x86/fpu: Include vmalloc.h for vzalloc()
selftests/x86/amx: Add context switch test
selftests/x86/amx: Add test cases for AMX state management
x86/fpu/amx: Enable the AMX feature in 64-bit mode
x86/fpu: Add XFD handling for dynamic states
x86/fpu: Calculate the default sizes independently
x86/fpu/amx: Define AMX state components and have it used for boot-time checks
x86/fpu/xstate: Prepare XSAVE feature table for gaps in state component numbers
x86/fpu/xstate: Add fpstate_realloc()/free()
x86/fpu/xstate: Add XFD #NM handler
x86/fpu: Update XFD state where required
x86/fpu: Add sanity checks for XFD
x86/fpu: Add XFD state to fpstate
x86/msr-index: Add MSRs for XFD
x86/cpufeatures: Add eXtended Feature Disabling (XFD) feature bit
x86/fpu: Reset permission and fpstate on exec()
x86/fpu: Prepare fpu_clone() for dynamically enabled features
x86/fpu/signal: Prepare for variable sigframe length
x86/signal: Use fpu::__state_user_size for sigalt stack validation
...
- Revert the printk format based wchan() symbol resolution as it can leak
the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset and
__sched_setscheduler() introduced a new lock dependency which is now
triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmF/OUkTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoR/5D/9ikdGNpKg9osNqJ3GjAmxsK6kVkB29
iFe2k8pIpWDToWQf/wQRGih4Yj3Cl49QSnZcPIibh2/12EB1qrrW6iSPJkInz8Ec
/1LS5/Vewn2OyoxyXZjdvGC5gTXEodSbIazASvX7nvdMeI4gsAsL5etzrMJirT/t
aymqvr7zovvywrwMTQJrGjUMo9l4ewE8tafMNNhRu1BHU1U4ojM9yvThyRAAcmp7
3Xy49A+Yq3IgrvYI4u8FMK5Zh08KaxSFjiLhePGm/bF+wSfYmWop2TP1jY05W2Uo
ti8hfbJMUoFRYuMxAiEldkItnc0wV4M9PtWZZ/x+B71bs65Y4Zjt9cW+rxJv2+m1
vzV31EsQwGnOti072dzWN4c/cZqngVXAjaNtErvDwJUr+Tw1ayv9KUvuodMQqZY6
mu68bFUO2kV9EMe1CBOv51Uy1RGHyLj3rlNqrkw+Xp5ISE9Ad2vhUEiRp5bQx5Ci
V/XFhGZkGUluh0vccrdFlNYZwhj8cZEzkOPCnPSeZ+bq8SyZE6xuHH/lTP1CJCOy
s800rW1huM+kgV+zRN8adDkGXibAk9N3RtVGnQXmuEy8gB9LZmQg+JeM2wsc9B+6
i0gdqZnsjNAfoK+BBAG4holxptSL8/eOJsFH8ZNIoxQ+iqooyPx9tFX7yXnRTBQj
d2qWG7UvoseT+g==
=fgtS
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- Revert the printk format based wchan() symbol resolution as it can
leak the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset
and __sched_setscheduler() introduced a new lock dependency which is
now triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
sched/fair: Cleanup newidle_balance
sched/fair: Remove sysctl_sched_migration_cost condition
sched/fair: Wait before decaying max_newidle_lb_cost
sched/fair: Skip update_blocked_averages if we are defering load balance
sched/fair: Account update_blocked_averages in newidle_balance cost
x86: Fix __get_wchan() for !STACKTRACE
sched,x86: Fix L2 cache mask
sched/core: Remove rq_relock()
sched: Improve wake_up_all_idle_cpus() take #2
irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
sched: Add cluster scheduler level for x86
sched: Add cluster scheduler level in core and related Kconfig for ARM64
topology: Represent clusters of CPUs within a die
sched: Disable -Wunused-but-set-variable
sched: Add wrapper for get_wchan() to keep task blocked
x86: Fix get_wchan() to support the ORC unwinder
proc: Use task_is_running() for wchan in /proc/$pid/stat
...
Support the DECLARE_PHY_INTERFACE_MASK() macro that is used to declare
a bitmap by converting the macro to DECLARE_BITMAP(), as has been done
for the __ETHTOOL_DECLARE_LINK_MODE_MASK() macro.
This fixes a 'make htmldocs' warning:
include/linux/phylink.h:82: warning: Function parameter or member 'DECLARE_PHY_INTERFACE_MASK(supported_interfaces' not described in 'phylink_config'
that was introduced by commit
38c310eb46 ("net: phylink: add MAC phy_interface_t bitmap")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/45934225-7942-4326-f883-a15378939db9@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This adds the following commits from upstream:
0a3a9d3449c8 checks: Add an interrupt-map check
8fd24744e361 checks: Ensure '#interrupt-cells' only exists in interrupt providers
d8d1a9a77863 checks: Drop interrupt provider '#address-cells' check
52a16fd72824 checks: Make interrupt_provider check dependent on interrupts_extended_is_cell
37fd700685da treesource: Maintain phandle label/path on output
e33ce1d6a8c7 flattree: Use '\n', not ';' to separate asm pseudo-ops
d24cc189dca6 asm: Use assembler macros instead of cpp macros
ff3a30c115ad asm: Use .asciz and .ascii instead of .string
5eb5927d81ee fdtdump: fix -Werror=int-to-pointer-cast
0869f8269161 libfdt: Add ALIGNMENT error string
69595a167f06 checks: Fix bus-range check
72d09e2682a4 Makefile: add -Wsign-compare to warning options
b587787ef388 checks: Fix signedness comparisons warnings
69bed6c2418f dtc: Wrap phandle validity check
910221185560 fdtget: Fix signedness comparisons warnings
d966f08fcd21 tests: Fix signedness comparisons warnings
ecfb438c07fa dtc: Fix signedness comparisons warnings: pointer diff
5bec74a6d135 dtc: Fix signedness comparisons warnings: reservednum
24e7f511fd4a fdtdump: Fix signedness comparisons warnings
b6910bec1161 Bump version to v1.6.1
21d61d18f968 Fix CID 1461557
4c2ef8f4d14c checks: Introduce is_multiple_of()
e59ca36fb70e Make handling of cpp line information more tolerant
0c3fd9b6aceb checks: Drop interrupt_cells_is_cell check
6b3081abc4ac checks: Add check_is_cell() for all phandle+arg properties
2dffc192a77f yamltree: Remove marker ordering dependency
61e513439e40 pylibfdt: Rework "avoid unused variable warning" lines
c8bddd106095 tests: add a positive gpio test case
ad4abfadb687 checks: replace strstr and strrchr with strends
09c6a6e88718 dtc.h: add strends for suffix matching
9bb9b8d0b4a0 checks: tigthen up nr-gpios prop exception
b07b62ee3342 libfdt: Add FDT alignment check to fdt_check_header()
a2def5479950 libfdt: Check that the root-node name is empty
4ca61f84dc21 libfdt: Check that there is only one root node
34d708249a91 dtc: Remove -O dtbo support
8e7ff260f755 libfdt: Fix a possible "unchecked return value" warning
88875268c05c checks: Warn on node-name and property name being the same
9d2279e7e6ee checks: Change node-name check to match devicetree spec
f527c867a8c6 util: limit gnu_printf format attribute to gcc >= 4.4.0
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
tools/testing/selftests/bpf/test_bpftool_synctypes.py use
relative patches on the top of BPFTOOL_DIR:
BPFTOOL_DIR = os.path.join(LINUX_ROOT, 'tools/bpf/bpftool')
Change the script to automatically convert:
testing/selftests/bpf -> bpf/bpftool
In order to properly check the files used by such script.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/49b765cbac6ccd22d627573154806ec9389d60f0.1634629094.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There's a warning there from a .gitignore file:
tools/perf/.gitignore: Documentation/doc.dep
This is not really a cross-reference type of warning, so
no need to report it.
In a matter of fact, it doesn't make sense at all to even
parse hidden files, as some text editors may create such
files for their own usage.
So, just ignore everything that matches this pattern:
/\.*
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/dd0125a931b4fecf8fab6be8aa527faa18f78e43.1634629094.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
To slim down the top Makefile, split out the code block surrounded by
ifdef CONFIG_DEBUG_INFO ... endif.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesauniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
The helper is used in tracing programs to cast a socket
pointer to a unix_sock pointer.
The return value could be NULL if the casting is illegal.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021134752.1223426-2-hengqi.chen@gmail.com
'tree-ssa-operands.h' included in 'gcc-common.h' is duplicated.
it's also included at line 56.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211019082910.998257-1-ye.guojin@zte.com.cn
This plugin has no impact on the resulting binary, is disabled
under COMPILE_TEST, and is not enabled on any builds I'm aware of.
Additionally, given the clarified purpose of GCC plugins in the kernel,
remove cyc_complexity.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-hardening@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20211020173554.38122-3-keescook@chromium.org
GCC plugins should only exist when some compiler feature needs to be
proven but does not exist in either GCC nor Clang. For example, if a
desired feature is already in Clang, it should be added to GCC upstream.
Document this explicitly.
Additionally, mark the plugins with matching upstream GCC features as
removable past their respective GCC versions.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: linux-hardening@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20211020173554.38122-2-keescook@chromium.org
Subsequent patches will add specialized handlers for fixups, in addition
to the simple PC fixup and BPF handlers we have today. In preparation,
this patch adds a new `type` field to struct exception_table_entry, and
uses this to distinguish the fixup and BPF cases. A `data` field is also
added so that subsequent patches can associate data specific to each
exception site (e.g. register numbers).
Handlers are named ex_handler_*() for consistency, following the exmaple
of x86. At the same time, get_ex_fixup() is split out into a helper so
that it can be used by other ex_handler_*() functions ins subsequent
patches.
This patch will increase the size of the exception tables, which will be
remedied by subsequent patches removing redundant fixup code. There
should be no functional change as a result of this patch.
Since each entry is now 12 bytes in size, we must reduce the alignment
of each entry from `.align 3` (i.e. 8 bytes) to `.align 2` (i.e. 4
bytes), which is the natrual alignment of the `insn` and `fixup` fields.
The current 8-byte alignment is a holdover from when the `insn` and
`fixup` fields was 8 bytes, and while not harmful has not been necessary
since commit:
6c94f27ac8 ("arm64: switch to relative exception tables")
Similarly, RO_EXCEPTION_TABLE_ALIGN is dropped to 4 bytes.
Concurrently with this patch, x86's exception table entry format is
being updated (similarly to a 12-byte format, with 32-bytes of absolute
data). Once both have been merged it should be possible to unify the
sorttable logic for the two.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: James Morse <james.morse@arm.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211019160219.5202-11-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
There are many places where kernel code wants to have several different
typed trailing flexible arrays. This would normally be done with multiple
flexible arrays in a union, but since GCC and Clang don't (on the surface)
allow this, there have been many open-coded workarounds, usually involving
neighboring 0-element arrays at the end of a structure. For example,
instead of something like this:
struct thing {
...
union {
struct type1 foo[];
struct type2 bar[];
};
};
code works around the compiler with:
struct thing {
...
struct type1 foo[0];
struct type2 bar[];
};
Another case is when a flexible array is wanted as the single member
within a struct (which itself is usually in a union). For example, this
would be worked around as:
union many {
...
struct {
struct type3 baz[0];
};
};
These kinds of work-arounds cause problems with size checks against such
zero-element arrays (for example when building with -Warray-bounds and
-Wzero-length-bounds, and with the coming FORTIFY_SOURCE improvements),
so they must all be converted to "real" flexible arrays, avoiding warnings
like this:
fs/hpfs/anode.c: In function 'hpfs_add_sector_to_btree':
fs/hpfs/anode.c:209:27: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct bplus_internal_node[0]' [-Wzero-length-bounds]
209 | anode->btree.u.internal[0].down = cpu_to_le32(a);
| ~~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from fs/hpfs/hpfs_fn.h:26,
from fs/hpfs/anode.c:10:
fs/hpfs/hpfs.h:412:32: note: while referencing 'internal'
412 | struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving
| ^~~~~~~~
drivers/net/can/usb/etas_es58x/es58x_fd.c: In function 'es58x_fd_tx_can_msg':
drivers/net/can/usb/etas_es58x/es58x_fd.c:360:35: warning: array subscript 65535 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[]'} [-Wzero-length-bounds]
360 | tx_can_msg = (typeof(tx_can_msg))&es58x_fd_urb_cmd->raw_msg[msg_len];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/can/usb/etas_es58x/es58x_core.h:22,
from drivers/net/can/usb/etas_es58x/es58x_fd.c:17:
drivers/net/can/usb/etas_es58x/es58x_fd.h:231:6: note: while referencing 'raw_msg'
231 | u8 raw_msg[0];
| ^~~~~~~
However, it _is_ entirely possible to have one or more flexible arrays
in a struct or union: it just has to be in another struct. And since it
cannot be alone in a struct, such a struct must have at least 1 other
named member -- but that member can be zero sized. Wrap all this nonsense
into the new DECLARE_FLEX_ARRAY() in support of having flexible arrays
in unions (or alone in a struct).
As with struct_group(), since this is needed in UAPI headers as well,
implement the core there, with a non-UAPI wrapper.
Additionally update kernel-doc to understand its existence.
https://github.com/KSPP/linux/issues/137
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
While the run-time testing of FORTIFY_SOURCE is already present in
LKDTM, there is no testing of the expected compile-time detections. In
preparation for correctly supporting FORTIFY_SOURCE under Clang, adding
additional FORTIFY_SOURCE defenses, and making sure FORTIFY_SOURCE
doesn't silently regress with GCC, introduce a build-time test suite that
checks each expected compile-time failure condition.
As this is relatively backwards from standard build rules in the
sense that a successful test is actually a compile _failure_, create
a wrapper script to check for the correct errors, and wire it up as
a dummy dependency to lib/string.o, collecting the results into a log
file artifact.
Signed-off-by: Kees Cook <keescook@chromium.org>
- Fix defined but not use warning/error for osnoise function
- Fix memory leak in event probe
- Fix memblock leak in bootconfig
- Fix the API of event probes to be like kprobes
- Added test to check removal of event probe API
- Fix recordmcount.pl for nds32 failed build
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYWpB6BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnu/AQD1eYekS43uCDyzzpvjsz0tZ6tzVH8z
ainpgtcAd11q4AD8CHLvhBsEyo99Yna2Mvir6nCkafm2Y2IVGvVbnDofnAA=
=yvDo
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Tracing fixes for 5.15:
- Fix defined but not use warning/error for osnoise function
- Fix memory leak in event probe
- Fix memblock leak in bootconfig
- Fix the API of event probes to be like kprobes
- Added test to check removal of event probe API
- Fix recordmcount.pl for nds32 failed build
* tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'
selftests/ftrace: Update test for more eprobe removal process
tracing: Fix event probe removal from dynamic events
tracing: Fix missing * in comment block
bootconfig: init: Fix memblock leak in xbc_make_cmdline()
tracing: Fix memory leak in eprobe_register()
tracing: Fix missing osnoise tracer on max_latency
Resolve the conflict between these commits:
x86/fpu: 1193f408cd ("x86/fpu/signal: Change return type of __fpu_restore_sig() to boolean")
x86/urgent: d298b03506 ("x86/fpu: Restore the masking out of reserved MXCSR bits")
b2381acd3f ("x86/fpu: Mask out the invalid MXCSR bits properly")
Conflicts:
arch/x86/kernel/fpu/signal.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I received a build failure for a new patch I'm working on the nds32
architecture, and when I went to test it, I couldn't get to my build error,
because it failed to build with a bunch of:
Error: invalid operands (*UND* and *UND* sections) for `^'
issues with various files. Those files were temporary asm files that looked
like: kernel/.tmp_mc_fork.s
I decided to look deeper, and found that the "mc" portion of that name
stood for "mcount", and was created by the recordmcount.pl script. One that
I wrote over a decade ago. Once I knew the source of the problem, I was
able to investigate it further.
The way the recordmcount.pl script works (BTW, there's a C version that
simply modifies the ELF object) is by doing an "objdump" on the object
file. Looks for all the calls to "mcount", and creates an offset of those
locations from some global variable it can use (usually a global function
name, found with <.*>:). Creates a asm file that is a table of references
to these locations, using the found variable/function. Compiles it and
links it back into the original object file. This asm file is called
".tmp_mc_<object_base_name>.s".
The problem here is that the objdump produced by the nds32 object file,
contains things that look like:
0000159a <.L3^B1>:
159a: c6 00 beqz38 $r6, 159a <.L3^B1>
159a: R_NDS32_9_PCREL_RELA .text+0x159e
159c: 84 d2 movi55 $r6, #-14
159e: 80 06 mov55 $r0, $r6
15a0: ec 3c addi10.sp #0x3c
Where ".L3^B1 is somehow selected as the "global" variable to index off of.
Then the assembly file that holds the mcount locations looks like this:
.section __mcount_loc,"a",@progbits
.align 2
.long .L3^B1 + -5522
.long .L3^B1 + -5384
.long .L3^B1 + -5270
.long .L3^B1 + -5098
.long .L3^B1 + -4970
.long .L3^B1 + -4758
.long .L3^B1 + -4122
[...]
And when it is compiled back to an object to link to the original object,
the compile fails on the "^" symbol.
Simple solution for now, is to have the perl script ignore using function
symbols that have an "^" in the name.
Link: https://lkml.kernel.org/r/20211014143507.4ad2c0f7@gandalf.local.home
Cc: stable@vger.kernel.org
Acked-by: Greentime Hu <green.hu@gmail.com>
Fixes: fbf58a52ac ("nds32/ftrace: Add RECORD_MCOUNT support")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes "Compiler Attributes: add __alloc_size() for better bounds checking"
so that the __alloc_size() macro is ignored for function prototypes when
generating kerndoc. Avoids warnings like:
./include/linux/slab.h:662: warning: Function parameter or member '1' not described in '__alloc_size'
./include/linux/slab.h:662: warning: Function parameter or member '2' not described in '__alloc_size'
./include/linux/slab.h:662: warning: expecting prototype for kcalloc(). Prototype was for __alloc_size() instead
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211011180650.3603988-1-keescook@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
update the comments of kallsyms support.
Fixes: af73d78bd3 ("kbuild: Remove debug info from kallsyms linking")
Signed-off-by: Hui Su <suhui_kernel@163.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This KUnit fixes update for Linux 5.15-rc6 consists of:
- Fixes to address the structleak plugin causing the stack frame size
to grow immensely when used with KUnit. Fixes include adding a new
makefile to disable structleak and using it from KUnit iio, device
property, thunderbolt, and bitfield tests to disable it.
- KUnit framework reference count leak in kfree_at_end
- KUnit tool fix to resolve conflict between --json and --raw_output
and generate correct test output in either case.
- kernel-doc warnings due to mismatched arg names
-----BEGIN PGP SIGNATURE-----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=08Ra
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
- Fixes to address the structleak plugin causing the stack frame size
to grow immensely when used with KUnit. Fixes include adding a new
makefile to disable structleak and using it from KUnit iio, device
property, thunderbolt, and bitfield tests to disable it.
- KUnit framework reference count leak in kfree_at_end
- KUnit tool fix to resolve conflict between --json and --raw_output
and generate correct test output in either case.
- kernel-doc warnings due to mismatched arg names
* tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix kernel-doc warnings due to mismatched arg names
bitfield: build kunit tests without structleak plugin
thunderbolt: build kunit tests without structleak plugin
device property: build kunit tests without structleak plugin
iio/test-format: build kunit tests without structleak plugin
gcc-plugins/structleak: add makefile var for disabling structleak
kunit: fix reference count leak in kfree_at_end
kunit: tool: better handling of quasi-bool args (--json, --raw_output)
If this function fails to touch a dummy header due to missing parent
directory, then it creates it and touches the file again.
This was needed because CONFIG_FOO_BAR was previously tracked by
include/config/foo/bar.h. (include/config/foo/ may not exist here)
This is no longer the case since commit 0e0345b77a ("kbuild: redo
fake deps at include/config/*.h"); now all the fake headers are placed
right under include/config/, like include/config/FOO_BAR.
Do not try to create parent directory, include/config/, which already
exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The if ... else inside the for-loop is unneeded because one empty
line is placed after printing the last element of deps_config.
Currently, all errors in conf_write_dep() are ignored. Add proper
error checks.
Rename it to conf_write_autoconf_cmd(), which is more intuitive.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This function does similar for auto.conf and autoconf.h
Create __conf_write_autoconf() helper to factor out the common code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now that sym_escape_string_value() is only used in confdata.c
it can be a 'static' function.
Rename it escape_string_value() because it is agnostic about
(struct sym *).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We can reuse __print_symbol() helper to print symbols for listnewconfig.
Only the difference is the format for "n" symbols.
This prints "CONFIG_FOO=n" instead of "# CONFIG_FOO is not set".
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I do not think 'struct conf_printer' is so useful.
Add simple functions, print_symbol_for_*() to write out one symbol.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
All the call sites of conf_write_heading() pass NULL to the third
argument, and it is not used in the function.
Also, the print_comment hooks are doing much more complex than
needed.
Rewrite the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* A pair of fixes (along with the necessary cleanup) to our VDSO, to
avoid
* A fix to checksyscalls to teach it about our rv32 UABI.
* A fix to add clone3() to the rv32 UABI, which was pointed out by
checksyscalls.
* A fix to properly flush the icache on the local CPU in addition to the
remote CPUs.
-----BEGIN PGP SIGNATURE-----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=+mKs
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of fixes (along with the necessory cleanup) to our VDSO, to
avoid a locking during OOM and to prevent the text from overflowing
into the data page
- A fix to checksyscalls to teach it about our rv32 UABI
- A fix to add clone3() to the rv32 UABI, which was pointed out by
checksyscalls
- A fix to properly flush the icache on the local CPU in addition to
the remote CPUs
* tag 'riscv-for-linus-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
checksyscalls: Unconditionally ignore fstat{,at}64
riscv: Flush current cpu icache before other cpus
RISC-V: Include clone3() on rv32
riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
riscv/vdso: Move vdso data page up front
riscv/vdso: Refactor asm/vdso.h
These can be replaced by statx(). Since rv32 has a 64-bit time_t we
just never ended up with them in the first place. This is now an error
due to -Werror.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
KUnit and structleak don't play nice, so add a makefile variable for
enabling structleak when it complains.
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This commit moves BTF ID lookup into the newly added registration
helper, in a way that the bbr, cubic, and dctcp implementation set up
their sets in the bpf_tcp_ca kfunc_btf_set list, while the ones not
dependent on modules are looked up from the wrapper function.
This lifts the restriction for them to be compiled as built in objects,
and can be loaded as modules if required. Also modify Makefile.modfinal
to call resolve_btfids for each module.
Note that since kernel kfunc_ids never overlap with module kfunc_ids, we
only match the owner for module btf id sets.
See following commits for background on use of:
CONFIG_X86 ifdef:
569c484f99 (bpf: Limit static tcp-cc functions in the .BTF_ids list to x86)
CONFIG_DYNAMIC_FTRACE ifdef:
7aae231ac9 (bpf: tcp: Limit calling some tcp cc functions to CONFIG_DYNAMIC_FTRACE)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-6-memxor@gmail.com
Using repeating sequencies of .* seem to slow down the
processing speed on some cases. Also, currently, a "."
character is not properly handled as such.
Change the way regexes are created, in order to produce
better search expressions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/c69c01c12b1b30466177dcb17e45f833fb47713d.1632994565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rule that falls back to the long regex list is wrong:
it is just running again the same loop it did before.
change it to look at the "others" table.
That slows the processing speed, but provides a better
list of undefined symbols.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/a3ba919e9a9208a5f012a13c9674c362a9d73169.1632994565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The minimum GCC version has been bumped to 5.1, so we can get rid of all
the compatibility code for anything older than that.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210922182632.633394-1-ardb@kernel.org
sym_escape_string_value() returns a malloc'ed memory, but as
(const char *). So, it must be casted to (void *) when it is free'd.
This is odd.
The return type of sym_escape_string_value() should be (char *).
I exploited that free(NULL) has no effect.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In Kconfig, like Python, you can enclose a string by double-quotes or
single-quotes. So, both "foo" and 'foo' are allowed.
The variable, "str", is used to remember whether the string started with
a double-quote or a single-quote because open/closing quotation marks
must match.
The name "str" is too generic to understand the intent. Rename it to
"open_quote", which is easier to understand. The type should be 'char'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Boris Kolpackov <boris@codesynthesis.com>
The variables, "ts" and "i", are used locally in the action of
the [ \t]+ pattern in the <HELP> start state.
Define them where they are used.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As parsing the sysfs entries can take a long time, add
progress information.
The progress logic will update the stats on every second,
or on 1% steps of the progress.
When STDERR is a console, it will use a single line, using
a VT-100 command to erase the line before rewriting it.
Otherwise, it will put one message on a separate line.
That would help to identify what parts of sysfs checking
that it is taking more time to process.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4e581dcbec21ad8a60fff883498018f96f13dd1c.1632823172.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current highlight schema is not working properly. So, use,
instead, Pod::Text.
While here, also update the copyright in order to reflect the latest
changes and the e-mail I'm currently using.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/89fcd301e065ed86dfd8670725144b196266b6a4.1632750315.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It doesn't make any sense to parse ABI entries under
/sys/firmware, as those are either specified by ACPI specs
or by Documentation/devicetree.
The current logic to ignore firmware entries is incomplete,
as it ignores just the relative name of the file, and not
its absolute name. This cause errors while parsing the
symlinks.
So, rewrite the logic for it to do a better job.
Tested with both x86 and arm64 (HiKey970) systems.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/1c806eaec96f6706db4b041bbe6a0e2519e9637e.1632750315.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The logic under graph_add_file should create, for every entry, a
__name name array for all entries of the tree. If this fails, the
symlink parsing will break.
Add an error if this ever happens.
While here, improve the output of data dumper to be more
compact and to avoid displaying things like $VAR1=.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/e7dd4d70e206723455d50c851802c8bb6c34941d.1632750315.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As warned, /sys/bus/iio/devices/iio:deviceX/fault_ovuv is defined 2 times:
Warning: /sys/bus/iio/devices/iio:deviceX/fault_ovuv is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856:14 ./Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865:0
The logic with joins the two entries is just places the paragraph
for the second entry after the previous one. That could cause more
warnings, as the produced ReST may become invalid, as in the case of
this specific symbol, which ends with a table:
/new_devel/v4l/docs/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856:2: WARNING: Malformed table.
No bottom table border found or no blank line after table bottom.
=== =======================================================
'1' The input voltage is negative or greater than VDD.
'0' The input voltage is positive and less than VDD (normal
state).
=== =======================================================
/new_devel/v4l/docs/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856:2: WARNING: Blank line required after table.
Address it by adding two blank lines before joining duplicated
symbols.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4ad2e3a65f781f0f8d40bb75aa5a07aca80564d6.1632740376.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We will be enabling THREAD_INFO_IN_TASK support for ARM, which means
that we can no longer load the stack canary value by masking the stack
pointer and taking the copy that lives in thread_info. Instead, we will
be able to load it from the task_struct directly, by using the TPIDRURO
register which will hold the current task pointer when
THREAD_INFO_IN_TASK is in effect. This is much more straight-forward,
and allows us to declutter this code a bit while at it.
Note that this means that ARMv6 (non-v6K) SMP systems can no longer use
this feature, but those are quite rare to begin with, so this is a
reasonable trade off.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Kernel code has a regular need to describe groups of members within a
structure usually when they need to be copied or initialized separately
from the rest of the surrounding structure. The generally accepted design
pattern in C is to use a named sub-struct:
struct foo {
int one;
struct {
int two;
int three, four;
} thing;
int five;
};
This would allow for traditional references and sizing:
memcpy(&dst.thing, &src.thing, sizeof(dst.thing));
However, doing this would mean that referencing struct members enclosed
by such named structs would always require including the sub-struct name
in identifiers:
do_something(dst.thing.three);
This has tended to be quite inflexible, especially when such groupings
need to be added to established code which causes huge naming churn.
Three workarounds exist in the kernel for this problem, and each have
other negative properties.
To avoid the naming churn, there is a design pattern of adding macro
aliases for the named struct:
#define f_three thing.three
This ends up polluting the global namespace, and makes it difficult to
search for identifiers.
Another common work-around in kernel code avoids the pollution by avoiding
the named struct entirely, instead identifying the group's boundaries using
either a pair of empty anonymous structs of a pair of zero-element arrays:
struct foo {
int one;
struct { } start;
int two;
int three, four;
struct { } finish;
int five;
};
struct foo {
int one;
int start[0];
int two;
int three, four;
int finish[0];
int five;
};
This allows code to avoid needing to use a sub-struct named for member
references within the surrounding structure, but loses the benefits of
being able to actually use such a struct, making it rather fragile. Using
these requires open-coded calculation of sizes and offsets. The efforts
made to avoid common mistakes include lots of comments, or adding various
BUILD_BUG_ON()s. Such code is left with no way for the compiler to reason
about the boundaries (e.g. the "start" object looks like it's 0 bytes
in length), making bounds checking depend on open-coded calculations:
if (length > offsetof(struct foo, finish) -
offsetof(struct foo, start))
return -EINVAL;
memcpy(&dst.start, &src.start, offsetof(struct foo, finish) -
offsetof(struct foo, start));
However, the vast majority of places in the kernel that operate on
groups of members do so without any identification of the grouping,
relying either on comments or implicit knowledge of the struct contents,
which is even harder for the compiler to reason about, and results in
even more fragile manual sizing, usually depending on member locations
outside of the region (e.g. to copy "two" and "three", use the start of
"four" to find the size):
BUILD_BUG_ON((offsetof(struct foo, four) <
offsetof(struct foo, two)) ||
(offsetof(struct foo, four) <
offsetof(struct foo, three));
if (length > offsetof(struct foo, four) -
offsetof(struct foo, two))
return -EINVAL;
memcpy(&dst.two, &src.two, length);
In order to have a regular programmatic way to describe a struct
region that can be used for references and sizing, can be examined for
bounds checking, avoids forcing the use of intermediate identifiers,
and avoids polluting the global namespace, introduce the struct_group()
macro. This macro wraps the member declarations to create an anonymous
union of an anonymous struct (no intermediate name) and a named struct
(for references and sizing):
struct foo {
int one;
struct_group(thing,
int two;
int three, four;
);
int five;
};
if (length > sizeof(src.thing))
return -EINVAL;
memcpy(&dst.thing, &src.thing, length);
do_something(dst.three);
There are some rare cases where the resulting struct_group() needs
attributes added, so struct_group_attr() is also introduced to allow
for specifying struct attributes (e.g. __align(x) or __packed).
Additionally, there are places where such declarations would like to
have the struct be tagged, so struct_group_tagged() is added.
Given there is a need for a handful of UAPI uses too, the underlying
__struct_group() macro has been defined in UAPI so it can be used there
too.
To avoid confusing scripts/kernel-doc, hide the macro from its struct
parsing.
Co-developed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/lkml/20210728023217.GC35706@embeddedor
Enhanced-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/lkml/41183a98-bdb9-4ad6-7eab-5a7292a6df84@rasmusvillemoes.dk
Enhanced-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/lkml/1d9a2e6df2a9a35b2cdd50a9a68cac5991e7e5f0.camel@intel.com
Enhanced-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/lkml/YQKa76A6XuFqgM03@phenom.ffwll.local
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
When one searches for a main menu item, links aren't created for it like
with the rest of the symbols.
This happens because we trace the item until we get to the rootmenu, but
we don't include it in the path of the item. The rationale was probably
that we don't want to show the main menu in the path of all items,
because it is redundant.
However, when an item has only the rootmenu in its path it should be
included, because this way the user can jump to its location.
Add a 'Main menu' entry in the 'Location:' section for the kconfig
items.
This makes the 'if (i > 0)' superfluous because each item with prompt
will have at least one menu in its path.
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, the asan-stack parameter is only passed along if
CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
be defined in Kconfig so that the value can be checked. In RISC-V's
case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
is disabled, resulting in large stack warnings with allmodconfig:
drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12: error: stack frame size (14400) exceeds limit (2048) in function 'lb035q02_connect' [-Werror,-Wframe-larger-than]
static int lb035q02_connect(struct omap_dss_device *dssdev)
^
1 error generated.
Ensure that the value of CONFIG_KASAN_STACK is always passed along to
the compiler so that these warnings do not happen when
CONFIG_KASAN_STACK is disabled.
Link: https://github.com/ClangBuiltLinux/linux/issues/1453
References: 6baec880d7 ("kasan: turn off asan-stack for clang-8 and earlier")
Link: https://lkml.kernel.org/r/20210922205525.570068-1-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the following build failure reported in [1] by adding a conditional
definition of EM_RISCV in order to allow cross-compilation on machines
which do not have EM_RISCV definition in their host.
scripts/sorttable.c:352:7: error: use of undeclared identifier 'EM_RISCV'
EM_RISCV was added to <elf.h> in glibc 2.24 so builds on systems with
glibc headers < 2.24 should show this error.
[mkubecek@suse.cz: changelog addition]
Link: https://lore.kernel.org/lkml/e8965b25-f15b-c7b4-748c-d207dda9c8e8@i2se.com/ [1]
Link: https://lkml.kernel.org/r/20210913030625.4525-1-miles.chen@mediatek.com
Fixes: 54fed35fd3 ("riscv: Enable BUILDTIME_TABLE_SORT")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Cc: Michal Kubecek <mkubecek@suse.cz>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The way the search algorithm works is that reduces the number of regex
expressions that will be checked for a given file entry at sysfs. It
does that by looking at the devnode name. For instance, when it checks for
this file:
/sys/bus/pci/drivers/iosf_mbi_pci/bind
The logic will seek only the "What:" expressions that end with "bind".
Currently, there are just a couple of What expressions that matches
it:
What: /sys/bus/fsl\-mc/drivers/.*/bind
What: /sys/bus/pci/drivers/.*/bind
It will then run an O(n²) algorithm to seek, which runs quickly
when there are few regexs to seek. There are, however, some What:
expressions that end with a wildcard. Those are harder to process.
Right now, they're all grouped together at the "others" group.
As those don't depend on the basename of the node, add an extra
loop to ensure that those will be processed at the end, if
not done yet.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9fe7ab46f67575def5db9e83034e9fab43846d84.1632411447.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to earn some time during matches, pre-compile regexes.
Before this patch:
$ time ./scripts/get_abi.pl undefined |wc -l
6970
real 0m54,751s
user 0m54,022s
sys 0m0,592s
Afterwards:
$ time ./scripts/get_abi.pl undefined |wc -l
6970
real 0m5,888s
user 0m5,310s
sys 0m0,562s
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ec45de8fcae791aab0880644974a110424423e68.1632411447.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the the leaf of a regex ends with a wildcard, the speedup
algorithm to reduce the number of regexes to seek won't work.
So, when those are found, place at the "others" exception.
That slows down the search from 0.14s to 1 minute on my
machine, but the results are a lot more consistent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/60bb97cf337333783f9f52e114b896439e9cc215.1632411447.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The $what conversions need to replace some characters to avoid
breaking regex expressions found on some What:.
only after replacing them back, the script should get the
$leave devnode.
Fixes: ca8e055c22 ("scripts: get_abi.pl: add a graph to speedup the undefined algorithm")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/a21631f8a884f50a962beafdd800f27891348d95.1632411447.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For CONFIG_LTO_CLANG=y, the objtool processing is not possible at the
compilation, hence postponed by the link time.
Reuse $(cmd_objtool) for CONFIG_LTO_CLANG=y by defining objtool-enabled
properly.
For CONFIG_LTO_CLANG=y:
objtool-enabled is off for %.o compilation
objtool-enabled is on for %.lto link
For CONFIG_LTO_CLANG=n:
objtool-enabled is on for %.o compilation
(but, it depends on OBJECT_FILE_NON_STANDARD)
Set part-of-module := y for %.lto.o to avoid repeating --module.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Redo commit 8852c55240 ("kbuild: Fix objtool dependency for
'OBJECT_FILES_NON_STANDARD_<obj> := n'") to add the objtool
dependency in a cleaner way.
Using .SECONDEXPANSION ends up with unreadable code due to escaped
dollars. Also, it is not efficient because the second half of
Makefile.build is parsed twice every time.
Append the objtool dependency to the *.cmd files at the build time.
This is what fixdep and gen_ksymdeps.sh already do. So, following the
same pattern seems a natural solution.
This allows us to drop $$(objtool_dep) entirely.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
The OBJECT_FILES_NON_STANDARD check is quite long.
Factor it out into a new macro, objtool-enabled, to not repeat it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
objtool_dep includes include/config/{ORC_UNWINDER,STACK_VALIDATION}
so that all the objects are rebuilt when CONFIG_ORC_UNWINDER or
CONFIG_STACK_VALIDATION is toggled.
BTW, the correct option name is not CONFIG_ORC_UNWINDER, but
CONFIG_UNWINDER_ORC. Commit 11af847446 ("x86/unwind: Rename
unwinder config options to 'CONFIG_UNWINDER_*'") missed to
adjust this part. So, this dependency has been broken for a
long time.
As you can see in 'objtool_args', there are more CONFIG options
that affect the objtool command line.
Adding more and more include/config/* is ugly and unmaintainable.
Another issue is that non-standard objects are needlessly rebuilt.
Objects specified as OBJECT_FILES_NON_STANDARD is not processed by
objtool, but they are rebuilt anyway when CONFIG_STACK_VALIDATION
is toggled. This is not a big deal, but better to fix.
A cleaner and more precise fix is to include the objtool command in
*.cmd files so any command change is naturally detected by if_change.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Rename __objtool_obj to objtool, and move it out of the
'ifndef CONFIG_LTO_CLANG' conditional, so it can be used for
cmd_cc_lto_link_modules as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Commit b1a1a1a09b ("kbuild: lto: postpone objtool") moved objtool_args
to Makefile.lib, so the arguments can be used in Makefile.modfinal as
well as Makefile.build.
With commit 850ded46c6 ("kbuild: Fix TRIM_UNUSED_KSYMS with
LTO_CLANG"), module LTO linking came back to scripts/Makefile.build
again.
So, there is no more reason to keep objtool_args in a separate file.
Get it back to the original place, close to the objtool command.
Remove the stale comment too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
With all the 'unit_address_format' warnings fixed, enable the warning by
default.
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-kbuild@vger.kernel.org
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210913192816.1225025-9-robh@kernel.org
Searching for symlinks is an expensive operation with the current
logic, as it is at the order of O(n^3). In practice, running the
check spends 2-3 minutes to check all symbols.
Fix it by storing the directory tree into a graph, and using
a Breadth First Search (BFS) to find the links for each sysfs node.
With such improvement, it can now report issues with ~11 seconds
on my machine.
It comes with a price, though: there are more symbols reported
as undefined after this change. I suspect it is due to some
sysfs circular loops that are dropped by BFS. Despite such
increase, it seems that the reports are now more coherent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/f5c1e7b14a27132821c08f0459ba9aea3ed69028.1631957565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The search algorithm used inside check_undefined_symbols
has an optimization: it seeks only whats that have the same
leave name. This helps not only to speedup the search, but
it also allows providing a hint about a partial match.
There's a drawback, however: when "what:" finishes with a
wildcard, the logic will skip the what, reporting it as
"not found".
Fix it by grouping the remaining cases altogether, and
disabing any hints for such cases.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/79ba5139643355230e3bba136b20991cfc92020f.1631957565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The way sysfs works is that the same leave may be present under
/sys/devices, /sys/bus and /sys/class, etc, linked via soft
symlinks.
To make it harder to parse, the ABI definition usually refers
only to one of those locations.
So, improve the logic in order to retrieve the symlinks.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/77c49f7d158d88e17f18d40652b75cdde9e179eb.1631957565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds
Drew Fustini
Julia Lawall
Usama Arif
Yinan Liu
Masahiro Yamada
Mauro Carvalho Chehab
Jisheng Zhang
Mark Rutland
Greg Kroah-Hartman
Heiko Carstens
John Ogness
Jerome Marchand
Marco Elver
Peter Zijlstra
Nathan Chancellor
Łukasz Stelmach
Josh Triplett
Zhaoyu Liu
Douglas Anderson
Peter Ujfalusi
Joe Perches
Rikard Falkeborn
Thomas Weißschuh
Kees Cook
weidonghui
Sven Eckelmann
Colin Ian King
Russell King (Oracle)
Jakub Kicinski
Jiri Olsa
Randy Dunlap
Rob Herring
Mauro Carvalho Chehab
Hengqi Chen
Ye Guojin
Ingo Molnar
Steven Rostedt
Paweł Jasiak
Hui Su
Palmer Dabbelt
Brendan Higgins
Kumar Kartikeya Dwivedi
Ard Biesheuvel
Ariel Marcovitch
Miles Chen