Граф коммитов

63 Коммитов

Автор SHA1 Сообщение Дата
Stephen Hemminger 77783a78de [PATCH] skge: fix dma mask setup.
There are a couple of problems in the DMA setup code for skge.
* In the 64 bit case, it doesn't set the consistent mask.
* In the 32 bit case, the error check is backwards!
It likely will only be visible as a bug on 64 bit platforms.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17 19:52:56 -05:00
Linus Torvalds d779188d2b Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 2006-01-04 16:31:56 -08:00
Arnaldo Carvalho de Melo 14c850212e [INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h
To help in reducing the number of include dependencies, several files were
touched as they were getting needed headers indirectly for stuff they use.

Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had
linux/dccp.h include twice.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:21 -08:00
Stephen Hemminger edd702e847 [PATCH] skge: error handling on resume
Also have to handle out of memory condition on resume.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:38:35 -05:00
Stephen Hemminger f15943f500 [PATCH] skge: version number (1.3)
Enough changes for one version.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:06 -05:00
Stephen Hemminger 3b8bb472ad [PATCH] skge: handle out of memory on ring parameter change
If changing ring parameters is unable to allocate memory, we need
to return an error and take the device down.

Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=5715
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:06 -05:00
Stephen Hemminger 7731a4ea1b [PATCH] skge: handle out of memory on MTU size changes
Changing the MTU size causes the receiver to have to reallocate buffers.
If this allocation fails, then we need to return an error, and take
the device offline. It can then be brought back up or reconfigured
for a smaller MTU.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:05 -05:00
Stephen Hemminger e8df855460 [PATCH] skge: avoid up/down on pause param changes
Change the pause settings doesn't need to cause link to go down/up.
It can be handled by the phy_reset code.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:05 -05:00
Stephen Hemminger ee294dcda1 [PATCH] skge: avoid up/down on speed changes
Change the speed settings doesn't need to cause link to go down/up.
It can be handled by doing the same logic as nway_reset.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:05 -05:00
Jeff Garzik 98684a9d91 [netdrvr skge] fix build 2005-12-13 11:35:22 -05:00
Stephen Hemminger ee1c81917a [PATCH] skge: get rid of warning on race
Get rid of warning in case of race with ring full and lockless
tx on the skge driver. It is possible to be in the transmit
routine with no available slots and already stopped.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 23:33:03 -05:00
Jeff Garzik ea182d4aef [netdrvr skge] fix typo, fix build 2005-12-01 04:31:32 -05:00
Stephen Hemminger 1096e87174 [PATCH] skge: handle VLAN checksum correctly on yukon rev 0
If using UDP over VLAN, with the skge driver there is a possibility
of generating an incorrect checksum. This is a unlikely occurrence
because it is only an issue on Yukon revision 0, and that revision
doesn't seem to exist on any current hardware (probably early prototype).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:28:56 -05:00
Stephen Hemminger d7eaee087a [PATCH] skge: increase version number
Increase the driver version number and print version when
probing.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-08 23:58:08 -05:00
Stephen Hemminger 8f3f8193a4 [PATCH] skge: spelling fixes
Fix some of my bad spelling.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-08 23:58:08 -05:00
Stephen Hemminger 1631aef151 [PATCH] skge: use prefetch on receive
Use prefetch() in the interrupt path to try and look ahead
at the next place will be looking at in the ring.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-08 23:58:08 -05:00
Stephen Hemminger 355ec57243 [PATCH] skge: goto low power mode on shutdown
Go into power down mode on shutdown.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-08 23:58:08 -05:00
Stephen Hemminger 2cd8e5d365 [PATCH] skge: add mii ioctl support
Basic MII ioctl support for skge driver.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-08 23:58:08 -05:00
Stephen Hemminger 7e86306113 [PATCH] skge: use kzalloc
Can use kzalloc in skge driver.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-08 23:58:08 -05:00
Stephen Hemminger adba9e23b4 [PATCH] skge: clear PCI PHY COMA mode on boot
When skge is booted up, the PHY may be stuck in power down state
by the previous OS. So we may need to turn it on.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-08 23:58:07 -05:00
Jeff Garzik 3c8c7b2f32 Merge branch 'upstream-fixes' 2005-10-03 22:06:19 -04:00
Stephen Hemminger c2681dd8c7 [PATCH] skge: set mac address oops with bonding
Skge driver was bringing link up/down when changing mac
address.  This doesn't work in the bonding environment, and is
more effort than needed.

Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=5271

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 21:58:33 -04:00
Stephen Hemminger c886861138 [PATCH] skge: fix Yukon-Lite A0 workaround
This is one of those workarounds sucked over from sk98lin driver.
The skge driver needs to detect the Yukon-Lite A0 chip properly,
and turn of Rx FIFO Flush.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 19:07:12 -04:00
Jeff Garzik da192bb50c Merge /spare/repo/linux-2.6/ 2005-09-22 15:43:14 -04:00
Jeff Garzik a3536c839f Merge /spare/repo/linux-2.6/ 2005-09-21 22:34:08 -04:00
Stephen Hemminger 383181ac7e [PATCH] skge: check length from PHY
Cleanup receive buffer allocation and management,
Add more error handling checks from PHY and bump version.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 22:32:50 -04:00
Stephen Hemminger c3f8be9618 [PATCH] skge: expand ethtool debug register dump
Expand the returned data for ethtool debug access to include
all of the mapped PCI area; except for the small set of registers
that are for diagnostic RAM access. Access to those registers
will hang the system.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 22:32:50 -04:00
Stephen Hemminger 46a60f2d71 [PATCH] skge: gmac register access errors in dual port
Merge of four previous patches and the Kconfig fix
 * Remove debug printk's
 * whitespace cleanup and version number change
 * clear interrupts, reset phy, and reset hardware on shutdown
 * ignore 64bit counter overflow interrupts
 * fix a couple of places where second port could clobber state
   of first port.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14 08:32:07 -04:00
John W. Linville 56230d5382 [PATCH] skge: support ETHTOOL_GPERMADDR
Add support for ETHTOOL_GPERMADDR to skge.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14 08:30:02 -04:00
Francois Romieu 86f0cd5057 [PATCH] r8169: avoid conflict between revisions 2 and 3 of the Linksys EG1032
Both revisions share the same PCI device ID and vendor ID but revision 2
of the device uses SysKonnect's chipset whereas revision 3 of the device
uses Realtek's 8169 chipset.

Credit goes to Christiaan Lutzer <mythtv.lutzer@gmail.com> for reporting
the issue and giving the actual value for the different revisions.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-27 04:41:01 -04:00
Stephen Hemminger 54cfb5aa0f [PATCH] skge: turn on link status LED
Turn on the link status LED when link comes up.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-16 17:03:13 -04:00
Stephen Hemminger c59230818f [PATCH] skge: increase receive flush threshold default
The flush threshold in the MAC chip should be increased.
Found while reviewing vendor version of sk98lin driver.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-16 17:03:13 -04:00
Stephen Hemminger 5e1705ddc8 [PATCH] skge: fibre vs copper detection cleanup
Cleanup the code that handles fibre vs copper detection.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

 drivers/net/skge.c |   26 ++++++++++++--------------
 drivers/net/skge.h |   11 ++---------
 2 files changed, 14 insertions(+), 23 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-16 17:03:13 -04:00
Stephen Hemminger 050ec18a35 [PATCH] skge: stop bogus sensor messages
Some versions of the Marvell yukon generate bogus sensor warning interrupts.
The driver would flood log with these messages.  Handle this situation
cleanly by masking away at boot time.

Fixes: http://bugs.gentoo.org/show_bug.cgi?id=87182

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

 drivers/net/skge.c |   24 ++++++++++--------------
 drivers/net/skge.h |    8 ++++++--
 2 files changed, 16 insertions(+), 16 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-16 17:03:13 -04:00
Stephen Hemminger f2e1e47d14 [PATCH] skge: version 0.8
Increase driver version to 0.8

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:40:54 -04:00
Stephen Hemminger 6abebb538d [PATCH] skge: led toggle cleanup
Cleanup code that is used to toggle LED's. Since we
get called from ethtool, can use that thread rather than
setting up a timer.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:40:54 -04:00
Stephen Hemminger 4cde06ed0f [PATCH] skge: ignore phy interrupts during negotiation
During autonegotiation set PHY interrupt mask to ignore
bogus speed change interrupts.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:40:53 -04:00
Stephen Hemminger d8a09943eb [PATCH] skge: fifo control register access fix
The code to clear fifo errors was incorrect and sending garbage
to the external phy. Removed the no longer used inline's funcs.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:40:53 -04:00
Stephen Hemminger 2c66851460 [PATCH] skge: whitespace fixes
Minor whitespace cleanups.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:40:53 -04:00
Stephen Hemminger 382317138b [PATCH] skge: support yukon lite rev 4
The check for Yukon lite changes was restricting itself to
rev A3. It turns out that these changes are also true on A4
and later.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:40:53 -04:00
Stephen Hemminger 4ff6ac052b [PATCH] skge: phy lock deadlock
Cleanup the phy_lock deadlock because of relocking in the nway_reset path.
Reported by Francois Romieu.

Also, don't need to do irqsave/restore for blink,
just excluding bh is good enough.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:40:53 -04:00
Stephen Hemminger 0eedf4ac5b [PATCH] skge: disable tranmitter on shutdown
Here is a fix for a typo, thanks Eliot Dresselhaus.
Since transmitter not active when device is down, it wasn't really noticed.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:40:53 -04:00
Stephen Hemminger acdd80d514 [PATCH] skge: remove SK-9EE support
The SK-9E boards use the Marvell Yukon2 chipset which
is not supported by the skge driver. Thanks to Ralph Roesler
for noticing.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:40:53 -04:00
Stephen Hemminger f6620cab94 [PATCH] skge: silence mac data parity messages
Using Genesis board, I get harmless error reports. Rather than console
error, turn it into a error counter.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:40:53 -04:00
Pavel Machek 2a569579be [PATCH] pm: more u32 vs. pm_message_t fixes
Few more u32 vs. pm_message_t fixes.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:43 -07:00
Stephen Hemminger 747802ab47 [PATCH] skge: version and copyright.
Bump version and copyright year.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27 18:05:07 -04:00
Stephen Hemminger 19a33d4e6b [PATCH] skge: Rx buffer optimization
Optimize the receive buffer management code to replenish the
buffers immediately (like tg3).

Signed-off-by: Stephen Hemmminger <shemminger@osdl.org>
2005-06-27 18:05:07 -04:00
Stephen Hemminger d25f5a6774 [PATCH] skge: handle Tx/Rx arbiter timeout
Need to handle receive and transmit packet arbiter timeouts.
Transmit arbiter timeouts happens when Gigabit sends to 100Mbit port
on same switch and pause occurs.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27 18:05:07 -04:00
Stephen Hemminger 7e676d9136 [PATCH] skge: add PHY related debug messages
Cleanup messages (for debug) about PHY interrrupts, because when
user can't get driver working that is often the problem.
Use a consistent way of enabling interrupts by port.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27 18:05:07 -04:00
Stephen Hemminger 45bada65c2 [PATCH] skge: make Genesis/Broadcom code work
Rewrite the code for handling the Broadcom PHY to something that
works. Remove link polling because Broadcom and Yukon don't need it.
When I wrote initial code, didn't have a genesis chipset based
board to test, so it was a non-working guess.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27 18:05:06 -04:00