- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space
and avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace
to work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction,
by exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec
offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP
buffer pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
and Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we
can add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements
to CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=srde
-----END PGP SIGNATURE-----
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
This update has a single change which will use the maximum transfer and
message sizes advertised by SPI controllers to configure limits within
the regmap core, ensuring better interoperation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF/6F8ACgkQJNaLcl1U
h9Calgf+PaI6wr17nU0/m4N50Vjat0bL7iBuEQYPKFWu963M0QasPZEKteJV7sa+
8XVxcBh43E2unQkY+iMfldmBIEfZJwmsaWecdxSair6cWcm8MT6agOOkl6KjiCHM
AQiPI2+UbXDHnPociBmyA+MqI3hWSPZIMirVC+3WAFGLs8wHuRe0G97egkcPh88a
doQ5f2Ei7eCgP4uy+p93S4QWXbsbQVm/yszw0BH0gaqnBylwUfQtU1vdlLyBXW4y
9bB1MnzCdlLbKf4bQd7NcjB2bA8lgAuZ3t5rJoRjZtnf+//fRTB1cu/UkLRFlZme
vsrt60wo52r2v5tiLKA4wrgcvEFR+A==
=8MR4
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap update from Mark Brown:
"A single change to use the maximum transfer and message sizes
advertised by SPI controllers to configure limits within the
regmap core, ensuring better interoperation"
* tag 'regmap-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: spi: Set regmap max raw r/w from max_transfer_size
- Revert the printk format based wchan() symbol resolution as it can leak
the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset and
__sched_setscheduler() introduced a new lock dependency which is now
triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=fgtS
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- Revert the printk format based wchan() symbol resolution as it can
leak the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset
and __sched_setscheduler() introduced a new lock dependency which is
now triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
sched/fair: Cleanup newidle_balance
sched/fair: Remove sysctl_sched_migration_cost condition
sched/fair: Wait before decaying max_newidle_lb_cost
sched/fair: Skip update_blocked_averages if we are defering load balance
sched/fair: Account update_blocked_averages in newidle_balance cost
x86: Fix __get_wchan() for !STACKTRACE
sched,x86: Fix L2 cache mask
sched/core: Remove rq_relock()
sched: Improve wake_up_all_idle_cpus() take #2
irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
sched: Add cluster scheduler level for x86
sched: Add cluster scheduler level in core and related Kconfig for ARM64
topology: Represent clusters of CPUs within a die
sched: Disable -Wunused-but-set-variable
sched: Add wrapper for get_wchan() to keep task blocked
x86: Fix get_wchan() to support the ORC unwinder
proc: Use task_is_running() for wchan in /proc/$pid/stat
...
This fixes a potential double free when handling an out of memory error
inserting a node into an rbtree regcache.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF6lHQACgkQJNaLcl1U
h9DNugf/WXDIhnn1ToxWpe80tGZFgTcyXN1T6QfCiP5iKbOsYHFYrITDUhnbCrV+
4z5YngU8Jw2bz6nx72Yt3c4bwQRl6ZESgH6Rupr1nClQO06k8bLySLVWJPH1V3y4
ofzdSc7x6JVHaVLj09NR6N3rrOKbmMxS8Ny0RMr7Futu0cPog0/7f57zG/Mkq9Fw
vBsLvtpwt9cAOPRl7lxiU3NXKVdWYyIXxOCGW7z+e7u/HK7W5ByELrgXo1BFLXST
dUks5d5qKHmExB/7plxv8mxOQlNHVimTxXpt2sL9Z9FoQR3OCs5kfG+eaIDyx5UW
Y10gaxu61sRO6g9EqUPhfzOkiAYk5Q==
=hMOi
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"This fixes a potential double free when handling an out of memory
error inserting a node into an rbtree regcache"
* tag 'regmap-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix possible double-free in regcache_rbtree_exit()
This converts users of mdiobus to mdiodev using the following semantic
patch:
@@
identifier mdiodev;
expression regnum;
@@
- mdiobus_read(mdiodev->bus, mdiodev->addr, regnum)
+ mdiodev_read(mdiodev, regnum)
@@
identifier mdiodev;
expression regnum, val;
@@
- mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val)
+ mdiodev_write(mdiodev, regnum, val)
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set regmap raw read/write from spi max_transfer_size
so regmap_raw_read/write can split the access into chunks
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
[André: fix build warning]
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20211021132721.13669-1-andrealmeid@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvzFg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymfLQCfSCP698AAvoCgG0fOfLakFkw80h0AoKIVm3lk
t0GUdnplU18CjnO5M1Zj
=+dh9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
Both ACPI and DT provide the ability to describe additional layers of
topology between that of individual cores and higher level constructs
such as the level at which the last level cache is shared.
In ACPI this can be represented in PPTT as a Processor Hierarchy
Node Structure [1] that is the parent of the CPU cores and in turn
has a parent Processor Hierarchy Nodes Structure representing
a higher level of topology.
For example Kunpeng 920 has 6 or 8 clusters in each NUMA node, and each
cluster has 4 cpus. All clusters share L3 cache data, but each cluster
has local L3 tag. On the other hand, each clusters will share some
internal system bus.
+-----------------------------------+ +---------+
| +------+ +------+ +--------------------------+ |
| | CPU0 | | cpu1 | | +-----------+ | |
| +------+ +------+ | | | | |
| +----+ L3 | | |
| +------+ +------+ cluster | | tag | | |
| | CPU2 | | CPU3 | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +----+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | L3 |
| data |
+-----------------------------------+ | |
| +------+ +------+ | +-----------+ | |
| | | | | | | | | |
| +------+ +------+ +----+ L3 | | |
| | | tag | | |
| +------+ +------+ | | | | |
| | | | | | +-----------+ | |
| +------+ +------+ +--------------------------+ |
+-----------------------------------| | |
+-----------------------------------| | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| +----+ L3 | | |
| +------+ +------+ | | tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +---+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +--+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | +---------+
+-----------------------------------+
That means spreading tasks among clusters will bring more bandwidth
while packing tasks within one cluster will lead to smaller cache
synchronization latency. So both kernel and userspace will have
a chance to leverage this topology to deploy tasks accordingly to
achieve either smaller cache latency within one cluster or an even
distribution of load among clusters for higher throughput.
This patch exposes cluster topology to both kernel and userspace.
Libraried like hwloc will know cluster by cluster_cpus and related
sysfs attributes. PoC of HWLOC support at [2].
Note this patch only handle the ACPI case.
Special consideration is needed for SMT processors, where it is
necessary to move 2 levels up the hierarchy from the leaf nodes
(thus skipping the processor core level).
Note that arm64 / ACPI does not provide any means of identifying
a die level in the topology but that may be unrelate to the cluster
level.
[1] ACPI Specification 6.3 - section 5.2.29.1 processor hierarchy node
structure (Type 0)
[2] https://github.com/hisilicon/hwloc/tree/linux-cluster
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210924085104.44806-2-21cnbao@gmail.com
tools/testing/selftests/net/ioam6.sh
7b1700e009 ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In regcache_rbtree_insert_to_block(), when 'present' realloc failed,
the 'blk' which is supposed to assign to 'rbnode->block' will be freed,
so 'rbnode->block' points a freed memory, in the error handling path of
regcache_rbtree_init(), 'rbnode->block' will be freed again in
regcache_rbtree_exit(), KASAN will report double-free as follows:
BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390
Call Trace:
slab_free_freelist_hook+0x10d/0x240
kfree+0xce/0x390
regcache_rbtree_exit+0x15d/0x1a0
regcache_rbtree_init+0x224/0x2c0
regcache_init+0x88d/0x1310
__regmap_init+0x3151/0x4a80
__devm_regmap_init+0x7d/0x100
madera_spi_probe+0x10f/0x333 [madera_spi]
spi_probe+0x183/0x210
really_probe+0x285/0xc30
To fix this, moving up the assignment of rbnode->block to immediately after
the reallocation has succeeded so that the data structure stays valid even
if the second reallocation fails.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 3f4ff561bc ("regmap: rbtree: Make cache_present bitmap per node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211012023735.1632786-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This KUnit fixes update for Linux 5.15-rc6 consists of:
- Fixes to address the structleak plugin causing the stack frame size
to grow immensely when used with KUnit. Fixes include adding a new
makefile to disable structleak and using it from KUnit iio, device
property, thunderbolt, and bitfield tests to disable it.
- KUnit framework reference count leak in kfree_at_end
- KUnit tool fix to resolve conflict between --json and --raw_output
and generate correct test output in either case.
- kernel-doc warnings due to mismatched arg names
-----BEGIN PGP SIGNATURE-----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=08Ra
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
- Fixes to address the structleak plugin causing the stack frame size
to grow immensely when used with KUnit. Fixes include adding a new
makefile to disable structleak and using it from KUnit iio, device
property, thunderbolt, and bitfield tests to disable it.
- KUnit framework reference count leak in kfree_at_end
- KUnit tool fix to resolve conflict between --json and --raw_output
and generate correct test output in either case.
- kernel-doc warnings due to mismatched arg names
* tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix kernel-doc warnings due to mismatched arg names
bitfield: build kunit tests without structleak plugin
thunderbolt: build kunit tests without structleak plugin
device property: build kunit tests without structleak plugin
iio/test-format: build kunit tests without structleak plugin
gcc-plugins/structleak: add makefile var for disabling structleak
kunit: fix reference count leak in kfree_at_end
kunit: tool: better handling of quasi-bool args (--json, --raw_output)
Move the mac address helpers out, eth.c already contains
a bunch of similar helpers.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The structleak plugin causes the stack frame size to grow immensely when
used with KUnit:
../drivers/base/test/property-entry-test.c:492:1: warning: the frame size of 2832 bytes is larger than 2048 bytes [-Wframe-larger-than=]
../drivers/base/test/property-entry-test.c:322:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=]
../drivers/base/test/property-entry-test.c:250:1: warning: the frame size of 4976 bytes is larger than 2048 bytes [-Wframe-larger-than=]
../drivers/base/test/property-entry-test.c:115:1: warning: the frame size of 3280 bytes is larger than 2048 bytes [-Wframe-larger-than=]
Turn it off in this file.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
SYNC_STATE_ONLY device links intentionally allow cycles because cyclic
sync_state() dependencies are valid and necessary.
However a SYNC_STATE_ONLY device link where the consumer and the supplier
are the same device is pointless because the device link would be deleted
as soon as the device probes (because it's also the consumer) and won't
affect when the sync_state() callback is called. It's a waste of CPU cycles
and memory to create this device link. So reject any attempts to create
such a device link.
Fixes: 05ef983e0d ("driver core: Add device link support for SYNC_STATE_ONLY flag")
Cc: stable <stable@vger.kernel.org>
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929190549.860541-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some driver core and kernfs fixes for reported issues for
5.15-rc4. These fixes include:
- kernfs positive dentry bugfix
- debugfs_create_file_size error path fix
- cpumask sysfs file bugfix to preserve the user/kernel abi (has
been reported multiple times.)
- devlink fixes for mdiobus devices as reported by the subsystem
maintainers.
Also included in here are some devlink debugging changes to make it
easier for people to report problems when asked. They have already
helped with the mdiobus and other subsystems reporting issues.
All of these have been linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYVmC1A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfCQCgtQ0kdPoPdUG6mPCn45rrbJQLBY4AnRL5JyhO
zB60l6C2EHHnLnRxMnQq
=gygB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some driver core and kernfs fixes for reported issues for
5.15-rc4. These fixes include:
- kernfs positive dentry bugfix
- debugfs_create_file_size error path fix
- cpumask sysfs file bugfix to preserve the user/kernel abi (has been
reported multiple times.)
- devlink fixes for mdiobus devices as reported by the subsystem
maintainers.
Also included in here are some devlink debugging changes to make it
easier for people to report problems when asked. They have already
helped with the mdiobus and other subsystems reporting issues.
All of these have been linux-next for a while with no reported issues"
* tag 'driver-core-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: also call kernfs_set_rev() for positive dentry
driver core: Add debug logs when fwnode links are added/deleted
driver core: Create __fwnode_link_del() helper function
driver core: Set deferred probe reason when deferred by driver core
net: mdiobus: Set FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD for mdiobus parents
driver core: fw_devlink: Add support for FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD
driver core: fw_devlink: Improve handling of cyclic dependencies
cpumask: Omit terminating null byte in cpumap_print_{list,bitmask}_to_buf
debugfs: debugfs_create_file_size(): use IS_ERR to check for error
The same code is repeated in multiple locations. Create a helper
function for it.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210915172808.620546-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the driver core defers the probe of a device, set the deferred
probe reason so that it's easier to debug. The deferred probe reason is
available in debugfs under devices_deferred.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210915172808.620546-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a parent device is also a supplier to a child device, fw_devlink=on by
design delays the probe() of the child device until the probe() of the
parent finishes successfully.
However, some drivers of such parent devices (where parent is also a
supplier) expect the child device to finish probing successfully as soon as
they are added using device_add() and before the probe() of the parent
device has completed successfully. One example of such a case is discussed
in the link mentioned below.
Add a flag to make fw_devlink=on not enforce these supplier-consumer
relationships, so these drivers can continue working.
Link: https://lore.kernel.org/netdev/CAGETcx_uj0V4DChME-gy5HGKTYnxLBX=TH2rag29f_p=UcG+Tg@mail.gmail.com/
Fixes: ea718c6990 ("Revert "Revert "driver core: Set fw_devlink=on by default""")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210915170940.617415-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we have a dependency of the form:
Device-A -> Device-C
Device-B
Device-C -> Device-B
Where,
* Indentation denotes "child of" parent in previous line.
* X -> Y denotes X is consumer of Y based on firmware (Eg: DT).
We have cyclic dependency: device-A -> device-C -> device-B -> device-A
fw_devlink current treats device-C -> device-B dependency as an invalid
dependency and doesn't enforce it but leaves the rest of the
dependencies as is.
While the current behavior is necessary, it is not sufficient if the
false dependency in this example is actually device-A -> device-C. When
this is the case, device-C will correctly probe defer waiting for
device-B to be added, but device-A will be incorrectly probe deferred by
fw_devlink waiting on device-C to probe successfully. Due to this, none
of the devices in the cycle will end up probing.
To fix this, we need to go relax all the dependencies in the cycle like
we already do in the other instances where fw_devlink detects cycles.
A real world example of this was reported[1] and analyzed[2].
[1] - https://lore.kernel.org/lkml/0a2c4106-7f48-2bb5-048e-8c001a7c3fda@samsung.com/
[2] - https://lore.kernel.org/lkml/CAGETcx8peaew90SWiux=TyvuGgvTQOmO4BFALz7aj0Za5QdNFQ@mail.gmail.com/
Fixes: f9aa460672 ("driver core: Refactor fw_devlink feature")
Cc: stable <stable@vger.kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210915170940.617415-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYUR8DAAKCRCAXGG7T9hj
vjclAP0ekisZSabOsmzM0iz8rpuYj113/kQozokFeFD5eQlEiAD/b5LytLosic/1
5XKa5fbOyimAyRBwblWhpLLhrW6uiAg=
=WoAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- The first hunk of a Xen swiotlb fixup series fixing multiple minor
issues and doing some small cleanups
- Some further Xen related fixes avoiding WARN() splats when running as
Xen guests or dom0
- A Kconfig fix allowing the pvcalls frontend to be built as a module
* tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
swiotlb-xen: drop DEFAULT_NSLABS
swiotlb-xen: arrange to have buffer info logged
swiotlb-xen: drop leftover __ref
swiotlb-xen: limit init retries
swiotlb-xen: suppress certain init retries
swiotlb-xen: maintain slab count properly
swiotlb-xen: fix late init retry
swiotlb-xen: avoid double free
xen/pvcalls: backend can be a module
xen: fix usage of pmd_populate in mremap for pv guests
xen: reset legacy rtc flag for PV domU
PM: base: power: don't try to use non-existing RTC for storing data
xen/balloon: use a kernel thread instead a workqueue
The boot-time allocation interface for memblock is a mess, with
'memblock_alloc()' returning a virtual pointer, but then you are
supposed to free it with 'memblock_free()' that takes a _physical_
address.
Not only is that all kinds of strange and illogical, but it actually
causes bugs, when people then use it like a normal allocation function,
and it fails spectacularly on a NULL pointer:
https://lore.kernel.org/all/20210912140820.GD25450@xsang-OptiPlex-9020/
or just random memory corruption if the debug checks don't catch it:
https://lore.kernel.org/all/61ab2d0c-3313-aaab-514c-e15b7aa054a0@suse.cz/
I really don't want to apply patches that treat the symptoms, when the
fundamental cause is this horribly confusing interface.
I started out looking at just automating a sane replacement sequence,
but because of this mix or virtual and physical addresses, and because
people have used the "__pa()" macro that can take either a regular
kernel pointer, or just the raw "unsigned long" address, it's all quite
messy.
So this just introduces a new saner interface for freeing a virtual
address that was allocated using 'memblock_alloc()', and that was kept
as a regular kernel pointer. And then it converts a couple of users
that are obvious and easy to test, including the 'xbc_nodes' case in
lib/bootconfig.c that caused problems.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 40caa127f3 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If there is no legacy RTC device, don't try to use it for storing trace
data across suspend/resume.
Cc: <stable@vger.kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210903084937.19392-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register
with the Energy Model in a consistent way and make several
drivers use it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because
the notification in question is triggered prematurely on some
systems (Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while
at it (Rob Herring).
-----BEGIN PGP SIGNATURE-----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=WSpr
-----END PGP SIGNATURE-----
Merge tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly ARM cpufreq driver updates, including one new
MediaTek driver that has just passed all of the reviews, with the
addition of a revert of a recent intel_pstate commit, some core
cpufreq changes and a DT-related update of the operating performance
points (OPP) support code.
Specifics:
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register with
the Energy Model in a consistent way and make several drivers use
it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because the
notification in question is triggered prematurely on some systems
(Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while at
it (Rob Herring)"
* tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
dt-bindings: opp: Convert to DT schema
dt-bindings: Clean-up OPP binding node names in examples
ARM: dts: omap: Drop references to opp.txt
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
...
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Currently, the "auto-movable" online policy does not allow for hotplugged
KERNEL (ZONE_NORMAL) memory to increase the amount of MOVABLE memory we
can have, primarily, because there is no coordiantion across memory
devices and we don't want to create zone-imbalances accidentially when
unplugging memory.
However, within a single memory device it's different. Let's allow for
KERNEL memory within a dynamic memory group to allow for more MOVABLE
within the same memory group. The only thing we have to take care of is
that the managing driver avoids zone imbalances by unplugging MOVABLE
memory first, otherwise there can be corner cases where unplug of memory
could result in (accidential) zone imbalances.
virtio-mem is the only user of dynamic memory groups and recently added
support for prioritizing unplug of ZONE_MOVABLE over ZONE_NORMAL, so we
don't need a new toggle to enable it for dynamic memory groups.
We limit this handling to dynamic memory groups, because:
* We want to keep the runtime overhead for collecting stats when
onlining a single memory block small. We tend to have only a handful of
dynamic memory groups, but we can have quite some static memory groups
(e.g., 256 DIMMs).
* It doesn't make too much sense for static memory groups, as we try
onlining all applicable memory blocks either completely to ZONE_MOVABLE
or not. In ordinary operation, we won't have a mixture of zones within
a static memory group.
When adding memory to a dynamic memory group, we'll first online memory to
ZONE_MOVABLE as long as early KERNEL memory allows for it. Then, we'll
online the next unit(s) to ZONE_NORMAL, until we can online the next
unit(s) to ZONE_MOVABLE.
For a simple virtio-mem device with a MOVABLE:KERNEL ratio of 3:1, it will
result in a layout like:
[M][M][M][M][M][M][M][M][N][M][M][M][N][M][M][M]...
^ movable memory due to early kernel memory
^ allows for more movable memory ...
^-----^ ... here
^ allows for more movable memory ...
^-----^ ... here
While the created layout is sub-optimal when it comes to contiguous zones,
it gives us the maximum flexibility when dynamically growing/shrinking a
device; we can grow small VMs really big in small steps, and still shrink
reliably to e.g., 1/4 of the maximum VM size in this example, removing
full memory blocks along with meta data more reliably.
Mark dynamic memory groups in the xarray such that we can efficiently
iterate over them when collecting stats. In usual setups, we have one
virtio-mem device per NUMA node, and usually only a small number of NUMA
nodes.
Note: for now, there seems to be no compelling reason to make this
behavior configurable.
Link: https://lkml.kernel.org/r/20210806124715.17090-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use memory groups to improve our "auto-movable" onlining policy:
1. For static memory groups (e.g., a DIMM), online a memory block MOVABLE
only if all other memory blocks in the group are either MOVABLE or could
be onlined MOVABLE. A DIMM will either be MOVABLE or not, not a mixture.
2. For dynamic memory groups (e.g., a virtio-mem device), online a
memory block MOVABLE only if all other memory blocks inside the
current unit are either MOVABLE or could be onlined MOVABLE. For a
virtio-mem device with a device block size with 512 MiB, all 128 MiB
memory blocks wihin a 512 MiB unit will either be MOVABLE or not, not
a mixture.
We have to pass the memory group to zone_for_pfn_range() to take the
memory group into account.
Note: for now, there seems to be no compelling reason to make this
behavior configurable.
Link: https://lkml.kernel.org/r/20210806124715.17090-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's track all present pages in each memory group. Especially, track
memory present in ZONE_MOVABLE and memory present in one of the kernel
zones (which really only is ZONE_NORMAL right now as memory groups only
apply to hotplugged memory) separately within a memory group, to prepare
for making smart auto-online decision for individual memory blocks within
a memory group based on group statistics.
Link: https://lkml.kernel.org/r/20210806124715.17090-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In our "auto-movable" memory onlining policy, we want to make decisions
across memory blocks of a single memory device. Examples of memory
devices include ACPI memory devices (in the simplest case a single DIMM)
and virtio-mem. For now, we don't have a connection between a single
memory block device and the real memory device. Each memory device
consists of 1..X memory block devices.
Let's logically group memory blocks belonging to the same memory device in
"memory groups". Memory groups can span multiple physical ranges and a
memory group itself does not contain any information regarding physical
ranges, only properties (e.g., "max_pages") necessary for improved memory
onlining.
Introduce two memory group types:
1) Static memory group: E.g., a single ACPI memory device, consisting
of 1..X memory resources. A memory group consists of 1..Y memory
blocks. The whole group is added/removed in one go. If any part
cannot get offlined, the whole group cannot be removed.
2) Dynamic memory group: E.g., a single virtio-mem device. Memory is
dynamically added/removed in a fixed granularity, called a "unit",
consisting of 1..X memory blocks. A unit is added/removed in one go.
If any part of a unit cannot get offlined, the whole unit cannot be
removed.
In case of 1) we usually want either all memory managed by ZONE_MOVABLE or
none. In case of 2) we usually want to have as many units as possible
managed by ZONE_MOVABLE. We want a single unit to be of the same type.
For now, memory groups are an internal concept that is not exposed to user
space; we might want to change that in the future, though.
add_memory() users can specify a mgid instead of a nid when passing the
MHP_NID_IS_MGID flag.
Link: https://lkml.kernel.org/r/20210806124715.17090-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/memory_hotplug: "auto-movable" online policy and memory groups", v3.
I. Goal
The goal of this series is improving in-kernel auto-online support. It
tackles the fundamental problems that:
1) We can create zone imbalances when onlining all memory blindly to
ZONE_MOVABLE, in the worst case crashing the system. We have to know
upfront how much memory we are going to hotplug such that we can
safely enable auto-onlining of all hotplugged memory to ZONE_MOVABLE
via "online_movable". This is far from practical and only applicable in
limited setups -- like inside VMs under the RHV/oVirt hypervisor which
will never hotplug more than 3 times the boot memory (and the
limitation is only in place due to the Linux limitation).
2) We see more setups that implement dynamic VM resizing, hot(un)plugging
memory to resize VM memory. In these setups, we might hotplug a lot of
memory, but it might happen in various small steps in both directions
(e.g., 2 GiB -> 8 GiB -> 4 GiB -> 16 GiB ...). virtio-mem is the
primary driver of this upstream right now, performing such dynamic
resizing NUMA-aware via multiple virtio-mem devices.
Onlining all hotplugged memory to ZONE_NORMAL means we basically have
no hotunplug guarantees. Onlining all to ZONE_MOVABLE means we can
easily run into zone imbalances when growing a VM. We want a mixture,
and we want as much memory as reasonable/configured in ZONE_MOVABLE.
Details regarding zone imbalances can be found at [1].
3) Memory devices consist of 1..X memory block devices, however, the
kernel doesn't really track the relationship. Consequently, also user
space has no idea. We want to make per-device decisions.
As one example, for memory hotunplug it doesn't make sense to use a
mixture of zones within a single DIMM: we want all MOVABLE if
possible, otherwise all !MOVABLE, because any !MOVABLE part will easily
block the whole DIMM from getting hotunplugged.
As another example, virtio-mem operates on individual units that span
1..X memory blocks. Similar to a DIMM, we want a unit to either be all
MOVABLE or !MOVABLE. A "unit" can be thought of like a DIMM, however,
all units of a virtio-mem device logically belong together and are
managed (added/removed) by a single driver. We want as much memory of
a virtio-mem device to be MOVABLE as possible.
4) We want memory onlining to be done right from the kernel while adding
memory, not triggered by user space via udev rules; for example, this
is reqired for fast memory hotplug for drivers that add individual
memory blocks, like virito-mem. We want a way to configure a policy in
the kernel and avoid implementing advanced policies in user space.
The auto-onlining support we have in the kernel is not sufficient. All we
have is a) online everything MOVABLE (online_movable) b) online everything
!MOVABLE (online_kernel) c) keep zones contiguous (online). This series
allows configuring c) to mean instead "online movable if possible
according to the coniguration, driven by a maximum MOVABLE:KERNEL ratio"
-- a new onlining policy.
II. Approach
This series does 3 things:
1) Introduces the "auto-movable" online policy that initially operates on
individual memory blocks only. It uses a maximum MOVABLE:KERNEL ratio
to make a decision whether a memory block will be onlined to
ZONE_MOVABLE or not. However, in the basic form, hotplugged KERNEL
memory does not allow for more MOVABLE memory (details in the
patches). CMA memory is treated like MOVABLE memory.
2) Introduces static (e.g., DIMM) and dynamic (e.g., virtio-mem) memory
groups and uses group information to make decisions in the
"auto-movable" online policy across memory blocks of a single memory
device (modeled as memory group). More details can be found in patch
#3 or in the DIMM example below.
3) Maximizes ZONE_MOVABLE memory within dynamic memory groups, by
allowing ZONE_NORMAL memory within a dynamic memory group to allow for
more ZONE_MOVABLE memory within the same memory group. The target use
case is dynamic VM resizing using virtio-mem. See the virtio-mem
example below.
I remember that the basic idea of using a ratio to implement a policy in
the kernel was once mentioned by Vitaly Kuznetsov, but I might be wrong (I
lost the pointer to that discussion).
For me, the main use case is using it along with virtio-mem (and DIMMs /
ppc64 dlpar where necessary) for dynamic resizing of VMs, increasing the
amount of memory we can hotunplug reliably again if we might eventually
hotplug a lot of memory to a VM.
III. Target Usage
The target usage will be:
1) Linux boots with "mhp_default_online_type=offline"
2) User space (e.g., systemd unit) configures memory onlining (according
to a config file and system properties), for example:
* Setting memory_hotplug.online_policy=auto-movable
* Setting memory_hotplug.auto_movable_ratio=301
* Setting memory_hotplug.auto_movable_numa_aware=true
3) User space enabled auto onlining via "echo online >
/sys/devices/system/memory/auto_online_blocks"
4) User space triggers manual onlining of all already-offline memory
blocks (go over offline memory blocks and set them to "online")
IV. Example
For DIMMs, hotplugging 4 GiB DIMMs to a 4 GiB VM with a configured ratio of
301% results in the following layout:
Memory block 0-15: DMA32 (early)
Memory block 32-47: Normal (early)
Memory block 48-79: Movable (DIMM 0)
Memory block 80-111: Movable (DIMM 1)
Memory block 112-143: Movable (DIMM 2)
Memory block 144-275: Normal (DIMM 3)
Memory block 176-207: Normal (DIMM 4)
... all Normal
(-> hotplugged Normal memory does not allow for more Movable memory)
For virtio-mem, using a simple, single virtio-mem device with a 4 GiB VM
will result in the following layout:
Memory block 0-15: DMA32 (early)
Memory block 32-47: Normal (early)
Memory block 48-143: Movable (virtio-mem, first 12 GiB)
Memory block 144: Normal (virtio-mem, next 128 MiB)
Memory block 145-147: Movable (virtio-mem, next 384 MiB)
Memory block 148: Normal (virtio-mem, next 128 MiB)
Memory block 149-151: Movable (virtio-mem, next 384 MiB)
... Normal/Movable mixture as above
(-> hotplugged Normal memory allows for more Movable memory within
the same device)
Which gives us maximum flexibility when dynamically growing/shrinking a
VM in smaller steps.
V. Doc Update
I'll update the memory-hotplug.rst documentation, once the overhaul [1] is
usptream. Until then, details can be found in patch #2.
VI. Future Work
1) Use memory groups for ppc64 dlpar
2) Being able to specify a portion of (early) kernel memory that will be
excluded from the ratio. Like "128 MiB globally/per node" are excluded.
This might be helpful when starting VMs with extremely small memory
footprint (e.g., 128 MiB) and hotplugging memory later -- not wanting
the first hotplugged units getting onlined to ZONE_MOVABLE. One
alternative would be a trigger to not consider ZONE_DMA memory
in the ratio. We'll have to see if this is really rrequired.
3) Indicate to user space that MOVABLE might be a bad idea -- especially
relevant when memory ballooning without support for balloon compaction
is active.
This patch (of 9):
For implementing a new memory onlining policy, which determines when to
online memory blocks to ZONE_MOVABLE semi-automatically, we need the
number of present early (boot) pages -- present pages excluding hotplugged
pages. Let's track these pages per zone.
Pass a page instead of the zone to adjust_present_page_count(), similar as
adjust_managed_page_count() and derive the zone from the page.
It's worth noting that a memory block to be offlined/onlined is either
completely "early" or "not early". add_memory() and friends can only add
complete memory blocks and we only online/offline complete (individual)
memory blocks.
Link: https://lkml.kernel.org/r/20210806124715.17090-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210806124715.17090-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: remove pfn_valid_within() and CONFIG_HOLES_IN_ZONE".
After recent updates to freeing unused parts of the memory map, no
architecture can have holes in the memory map within a pageblock. This
makes pfn_valid_within() check and CONFIG_HOLES_IN_ZONE configuration
option redundant.
The first patch removes them both in a mechanical way and the second patch
simplifies memory_hotplug::test_pages_in_a_zone() that had
pfn_valid_within() surrounded by more logic than simple if.
This patch (of 2):
After recent changes in freeing of the unused parts of the memory map and
rework of pfn_valid() in arm and arm64 there are no architectures that can
have holes in the memory map within a pageblock and so nothing can enable
CONFIG_HOLES_IN_ZONE which guards non trivial implementation of
pfn_valid_within().
With that, pfn_valid_within() is always hardwired to 1 and can be
completely removed.
Remove calls to pfn_valid_within() and CONFIG_HOLES_IN_ZONE.
Link: https://lkml.kernel.org/r/20210713080035.7464-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20210713080035.7464-2-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm-cpufreq:
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
cpufreq: dt: Use .register_em() to register with energy model
cpufreq: Add callback to register with energy model
cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag
There are variables(power.may_skip_resume and dev->power.must_resume)
and DPM_FLAG_MAY_SKIP_RESUME flags to control the resume of devices after
a system wide suspend transition.
Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows
its "noirq" and "early" resume callbacks to be skipped if the device
can be left in suspend after a system-wide transition into the working
state. PM core determines that the driver's "noirq" and "early" resume
callbacks should be skipped or not with dev_pm_skip_resume() function by
checking power.may_skip_resume variable.
power.must_resume variable is getting set to false in __device_suspend()
function without checking device's DPM_FLAG_MAY_SKIP_RESUME settings.
In problematic scenario, where all the devices in the suspend_late
stage are successful and some device can fail to suspend in
suspend_noirq phase. So some devices successfully suspended in suspend_late
stage are not getting chance to execute __device_suspend_noirq()
to set dev->power.must_resume variable to true and not getting
resumed in early_resume phase.
Add a check for device's DPM_FLAG_MAY_SKIP_RESUME flag before
setting power.must_resume variable in __device_suspend function.
Fixes: 6e176bf8d4 ("PM: sleep: core: Do not skip callbacks in the resume phase")
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This function has the 'irq' parameter which isn't ever used, so drop it.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"A new feature called restricted DMA pools. It allows SWIOTLB to
utilize per-device (or per-platform) allocated memory pools instead of
using the global one.
The first big user of this is ARM Confidential Computing where the
memory for DMA operations can be set per platform"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits)
swiotlb: use depends on for DMA_RESTRICTED_POOL
of: restricted dma: Don't fail device probe on rmem init failure
of: Move of_dma_set_restricted_buffer() into device.c
powerpc/svm: Don't issue ultracalls if !mem_encrypt_active()
s390/pv: fix the forcing of the swiotlb
swiotlb: Free tbl memory in swiotlb_exit()
swiotlb: Emit diagnostic in swiotlb_exit()
swiotlb: Convert io_default_tlb_mem to static allocation
of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS
swiotlb: add overflow checks to swiotlb_bounce
swiotlb: fix implicit debugfs declarations
of: Add plumbing for restricted DMA pool
dt-bindings: of: Add restricted DMA pool
swiotlb: Add restricted DMA pool initialization
swiotlb: Add restricted DMA alloc/free support
swiotlb: Refactor swiotlb_tbl_unmap_single
swiotlb: Move alloc_size to swiotlb_find_slots
swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
swiotlb: Update is_swiotlb_active to add a struct device argument
swiotlb: Update is_swiotlb_buffer to add a struct device argument
...
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
There are a lot of uses of memblock_find_in_range() along with
memblock_reserve() from the times memblock allocation APIs did not exist.
memblock_find_in_range() is the very core of memblock allocations, so any
future changes to its internal behaviour would mandate updates of all the
users outside memblock.
Replace the calls to memblock_find_in_range() with an equivalent calls to
memblock_phys_alloc() and memblock_phys_alloc_range() and make
memblock_find_in_range() private method of memblock.
This simplifies the callers, ensures that (unlikely) errors in
memblock_reserve() are handled and improves maintainability of
memblock_find_in_range().
Link: https://lkml.kernel.org/r/20210816122622.30279-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ACPI]
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Nick Kossifidis <mick@ics.forth.gr> [riscv]
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With CONFIG_SPARSEMEM_EXTREME enabled, __section_nr() which converts
mem_section to section_nr could be costly since it iterates all section
roots to check if the given mem_section is in its range.
On the other hand, __nr_to_section() which converts section_nr to
mem_section can be done in O(1).
Let's pass section_nr instead of mem_section ptr to find_memory_block() in
order to reduce needless iterations.
Link: https://lkml.kernel.org/r/20210707150212.855-3-ohoono.kwon@samsung.com
Signed-off-by: Ohhoon Kwon <ohoono.kwon@samsung.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas). The core change causing the most
churn was replacing the command request field request with a macro,
allowing us to offset map to it and remove the redundant field; the
same was also done for the tag field. The most impactful change is
the final removal of scsi_ioctl, which has been deprecated for over a
decade.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
hC3BUEW8f2LLnujWanQ=
=lC5o
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
some updates to the basic clk types to use determine_rate for the
divider type and add a power of two fractional divider flag though.
Otherwise, this is a collection of clk driver updates. More than half
the diffstat is in the Qualcomm clk driver where we add a bunch of data
to describe clks on various SoCs and fix bugs. The other big new thing
in here is the Mediatek MT8192 clk driver. That's been under review for
a while and it's nice to see that it's finally upstream.
Beyond that it's the usual set of minor fixes and tweaks to clk drivers.
There are some non-clk driver bits in here which have all been acked by
the respective maintainers.
New Drivers:
- Support video, gpu, display clks on qcom sc7280 SoCs
- GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
- Multimedia clks (MMCC) on qcom MSM8994/MSM8992
- RPMh clks on qcom SM6350 SoCs
- Support for Mediatek MT8192 SoCs
- Add display (DU and DSI) clocks on Renesas R-Car V3U
- Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
resets on Renesas RZ/G2L
Updates:
- Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
- Add power of two flag to fractional divider clk type
- Migrate some clk drivers to clk_divider_ops.determine_rate
- Migrate to clk_parent_data in gcc-sdm660
- Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2
- Switch from .round_rate to .determine_rate in clk-divider-gate
- Fix clock tree update for TF-A controlled clocks for all i.MX8M
- Add missing M7 core clock for i.MX8MN
- YAML conversion of rk3399 clock controller binding
- Removal of GRF dependency for the rk3328/rk3036 pll types
- Drop CLK_IS_CRITICAL flag from Tegra fuse clk
- Make CLK_R9A06G032 Kconfig symbol invisible
- Convert various DT bindings to YAML
-----BEGIN PGP SIGNATURE-----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=Rrqg
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Nothing changed in the clk framework core this time around. We did get
some updates to the basic clk types to use determine_rate for the
divider type and add a power of two fractional divider flag though.
Otherwise, this is a collection of clk driver updates. More than half
the diffstat is in the Qualcomm clk driver where we add a bunch of
data to describe clks on various SoCs and fix bugs. The other big new
thing in here is the Mediatek MT8192 clk driver. That's been under
review for a while and it's nice to see that it's finally upstream.
Beyond that it's the usual set of minor fixes and tweaks to clk
drivers. There are some non-clk driver bits in here which have all
been acked by the respective maintainers.
New Drivers:
- Support video, gpu, display clks on qcom sc7280 SoCs
- GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
- Multimedia clks (MMCC) on qcom MSM8994/MSM8992
- RPMh clks on qcom SM6350 SoCs
- Support for Mediatek MT8192 SoCs
- Add display (DU and DSI) clocks on Renesas R-Car V3U
- Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
resets on Renesas RZ/G2L
Updates:
- Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
- Add power of two flag to fractional divider clk type
- Migrate some clk drivers to clk_divider_ops.determine_rate
- Migrate to clk_parent_data in gcc-sdm660
- Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2
- Switch from .round_rate to .determine_rate in clk-divider-gate
- Fix clock tree update for TF-A controlled clocks for all i.MX8M
- Add missing M7 core clock for i.MX8MN
- YAML conversion of rk3399 clock controller binding
- Removal of GRF dependency for the rk3328/rk3036 pll types
- Drop CLK_IS_CRITICAL flag from Tegra fuse clk
- Make CLK_R9A06G032 Kconfig symbol invisible
- Convert various DT bindings to YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits)
dt-bindings: clock: samsung: fix header path in example
clk: tegra: fix old-style declaration
clk: qcom: Add SM6350 GCC driver
MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry
dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos4 to dtschema
dt-bindings: clock: samsung: convert Exynos3250 to dtschema
dt-bindings: clock: samsung: convert Exynos542x to dtschema
dt-bindings: clock: samsung: add bindings for Exynos external clock
dt-bindings: clock: samsung: convert Exynos5250 to dtschema
clk: vc5: Add properties for configuring SD/OE behavior
clk: vc5: Use dev_err_probe
dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
dt-bindings: clock: brcm,iproc-clocks: fix armpll properties
clk: zynqmp: Fix kernel-doc format
clk: at91: clk-generated: Limit the requested rate to our range
clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
clk: zynqmp: Fix a memory leak
clk: zynqmp: Check the return type
...
-----BEGIN PGP SIGNATURE-----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=yEVq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Optionally, provide an index of possible printk messages via
<debugfs>/printk/index/. It can be used when monitoring important
kernel messages on a farm of various hosts. The monitor has to be
updated when some messages has changed or are not longer available by
a newly deployed kernel.
- Add printk.console_no_auto_verbose boot parameter. It allows to
generate crash dump even with slow consoles in a reasonable time
frame.
- Remove printk_safe buffers. The messages are always stored directly
to the main logbuffer, even in NMI or recursive context. Also it
allows to serialize syslog operations by a mutex instead of a spin
lock.
- Misc clean up and build fixes.
* tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/index: Fix -Wunused-function warning
lib/nmi_backtrace: Serialize even messages about idle CPUs
printk: Add printk.console_no_auto_verbose boot parameter
printk: Remove console_silent()
lib/test_scanf: Handle n_bits == 0 in random tests
printk: syslog: close window between wait and read
printk: convert @syslog_lock to mutex
printk: remove NMI tracking
printk: remove safe buffers
printk: track/limit recursion
lib/nmi_backtrace: explicitly serialize banner and regs
printk: Move the printk() kerneldoc comment to its new home
printk/index: Fix warning about missing prototypes
MIPS/asm/printk: Fix build failure caused by printk
printk: index: Add indexing support to dev_printk
printk: Userspace format indexing support
printk: Rework parse_prefix into printk_parse_prefix
printk: Straighten out log_flags into printk_info_flags
string_helpers: Escape double quotes in escape_special
printk/console: Check consistent sequence number when handling race in console_unlock()
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
- Update ACPICA code in the kernel to upstream revision 20210730
including the following changes:
* Add support for the AEST table (data compiler) to iASL (Bob
Moore).
* Fix an if statement (add parens) (Bob Moore).
* Drop trailing semicolon from some macros (Bob Moore).
* Fix compilation of WPBT table with no command-line arguments
in iASL (Bob Moore).
* Add method name "_DIS" for use with aslmethod.c (Bob Moore).
* Add new DBG2 Serial Port Subtypes (Marcin Wojtas).
- Add new PCH FIVR methods to the DPTF code (Srinivas Pandruvada).
- Add support for the new 16550-compatible Serial Port Subtype to
the SPCR table parsing code (Marcin Wojtas).
- Add DMI quirk for Lenovo Yoga 9 (14INTL5) to the ACPI button
driver (Ulrich Huber).
- Add LoongArch support for ACPI_PROCESSOR/ACPI_NUMA (Huacai Chen).
- Add memory semantics to acpi_os_map_memory() (Lorenzo Pieralisi).
- Replace deprecated CPU-hotplug functions in the ACPI processor
driver (Sebastian Andrzej Siewior).
- Optimize I2C-bus handling in the XPower PMIC driver (Hans de Goede).
- Make platform-profile catch profile changes initiated by user space
and notify user processes of them (Hans de Goede).
- Clean up the ACPI companion binding and unbinding code and update
debug messaging in the ACPI power resources code (Rafael Wysocki).
- Clean up a couple of code pieces related to configfs (Andy
Shevchenko).
- Rearrange the FPDT table parsing code to avoid printing warning
messages for reserved record types (Adrian Huang).
-----BEGIN PGP SIGNATURE-----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=YRjN
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20210730,
clean up the ACPI companion binding code, optimize the I2C handling in
the XPower PMIC driver, add 16550-compatible Serial Port Subtype
support to the SPCR parsing code, add a few LoongArch support bits,
add a ne quirk to the button driver, add new PCH FIVR methods to the
DPTF code, replace deprecated CPU-hotplug functions in the processor
driver, improve the acpi_os_map_memory() handling on non-x86 and do
some assorted cleanups.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20210730
including the following changes:
- Add support for the AEST table (data compiler) to iASL (Bob
Moore)
- Fix an if statement (add parens) (Bob Moore)
- Drop trailing semicolon from some macros (Bob Moore)
- Fix compilation of WPBT table with no command-line arguments in
iASL (Bob Moore)
- Add method name "_DIS" for use with aslmethod.c (Bob Moore)
- Add new DBG2 Serial Port Subtypes (Marcin Wojtas)
- Add new PCH FIVR methods to the DPTF code (Srinivas Pandruvada)
- Add support for the new 16550-compatible Serial Port Subtype to the
SPCR table parsing code (Marcin Wojtas)
- Add DMI quirk for Lenovo Yoga 9 (14INTL5) to the ACPI button driver
(Ulrich Huber)
- Add LoongArch support for ACPI_PROCESSOR/ACPI_NUMA (Huacai Chen)
- Add memory semantics to acpi_os_map_memory() (Lorenzo Pieralisi)
- Replace deprecated CPU-hotplug functions in the ACPI processor
driver (Sebastian Andrzej Siewior)
- Optimize I2C-bus handling in the XPower PMIC driver (Hans de Goede)
- Make platform-profile catch profile changes initiated by user space
and notify user processes of them (Hans de Goede)
- Clean up the ACPI companion binding and unbinding code and update
debug messaging in the ACPI power resources code (Rafael Wysocki)
- Clean up a couple of code pieces related to configfs (Andy
Shevchenko)
- Rearrange the FPDT table parsing code to avoid printing warning
messages for reserved record types (Adrian Huang)"
* tag 'acpi-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
ACPI: power: Drop name from struct acpi_power_resource
ACPI: power: Use acpi_handle_debug() to print debug messages
ACPI: tables: FPDT: Do not print FW_BUG message if record types are reserved
ACPI: button: Add DMI quirk for Lenovo Yoga 9 (14INTL5)
ACPI: Add memory semantics to acpi_os_map_memory()
ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype
ACPI: platform-profile: call sysfs_notify() from platform_profile_store()
ACPICA: Update version to 20210730
ACPICA: Add method name "_DIS" For use with aslmethod.c
ACPICA: iASL: Fix for WPBT table with no command-line arguments
ACPICA: Headers: Add new DBG2 Serial Port Subtypes
ACPICA: Macros should not use a trailing semicolon
ACPICA: Fix an if statement (add parens)
ACPICA: iASL: Add support for the AEST table (data compiler)
ACPI: processor: Replace deprecated CPU-hotplug functions
ACPI: DPTF: Add new PCH FIVR methods
ACPI: configfs: Make get_header() to return error pointer
ACPI: configfs: Use sysfs_emit() in "show" functions
driver core: Split device_platform_notify()
software nodes: Split software_node_notify()
...
Linus Torvalds
Jakub Kicinski
Sean Anderson
Lucas Tanure
David S. Miller
Jonathan Cameron
Yang Yingliang
Brendan Higgins
Saravana Kannan
Laurentiu Tudor
Juergen Gross
Rafael J. Wysocki
David Hildenbrand
Mike Rapoport
Prasad Sodagudi
Sergey Shtylyov
Ohhoon Kwon