Граф коммитов

136 Коммитов

Автор SHA1 Сообщение Дата
Paul Gortmaker 19348e749e x86: ptrace.c only needs export.h and not the full module.h
Commit cb57a2b4cf ("x86-32: Export
kernel_stack_pointer() for modules") added an include of the
module.h header in conjunction with adding an EXPORT_SYMBOL_GPL
of kernel_stack_pointer.

But module.h should be avoided for simple exports, since it in turn
includes the world.  Swap the module.h for export.h instead.

Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1360872842-28417-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-14 12:56:12 -08:00
Ingo Molnar 630e1e0bcd Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Conflicts:
	arch/x86/kernel/ptrace.c

Pull the latest RCU tree from Paul E. McKenney:

"       The major features of this series are:

  1.	A first version of no-callbacks CPUs.  This version prohibits
  	offlining CPU 0, but only when enabled via CONFIG_RCU_NOCB_CPU=y.
  	Relaxing this constraint is in progress, but not yet ready
  	for prime time.  These commits were posted to LKML at
  	https://lkml.org/lkml/2012/10/30/724, and are at branch rcu/nocb.

  2.	Changes to SRCU that allows statically initialized srcu_struct
  	structures.  These commits were posted to LKML at
  	https://lkml.org/lkml/2012/10/30/296, and are at branch rcu/srcu.

  3.	Restructuring of RCU's debugfs output.  These commits were posted
  	to LKML at https://lkml.org/lkml/2012/10/30/341, and are at
  	branch rcu/tracing.

  4.	Additional CPU-hotplug/RCU improvements, posted to LKML at
  	https://lkml.org/lkml/2012/10/30/327, and are at branch rcu/hotplug.
  	Note that the commit eliminating __stop_machine() was judged to
  	be too-high of risk, so is deferred to 3.9.

  5.	Changes to RCU's idle interface, most notably a new module
  	parameter that redirects normal grace-period operations to
  	their expedited equivalents.  These were posted to LKML at
  	https://lkml.org/lkml/2012/10/30/739, and are at branch rcu/idle.

  6.	Additional diagnostics for RCU's CPU stall warning facility,
  	posted to LKML at https://lkml.org/lkml/2012/10/30/315, and
  	are at branch rcu/stall.  The most notable change reduces the
  	default RCU CPU stall-warning time from 60 seconds to 21 seconds,
  	so that it once again happens sooner than the softlockup timeout.

  7.	Documentation updates, which were posted to LKML at
  	https://lkml.org/lkml/2012/10/30/280, and are at branch rcu/doc.
  	A couple of late-breaking changes were posted at
  	https://lkml.org/lkml/2012/11/16/634 and
  	https://lkml.org/lkml/2012/11/16/547.

  8.	Miscellaneous fixes, which were posted to LKML at
  	https://lkml.org/lkml/2012/10/30/309, along with a late-breaking
  	change posted at Fri, 16 Nov 2012 11:26:25 -0800 with message-ID
  	<20121116192625.GA447@linux.vnet.ibm.com>, but which lkml.org
  	seems to have missed.  These are at branch rcu/fixes.

  9.	Finally, a fix for an lockdep-RCU splat was posted to LKML
  	at https://lkml.org/lkml/2012/11/7/486.  This is at rcu/next. "

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-12-03 06:27:05 +01:00
Linus Torvalds b3c3a9cf2a Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU fix from Ingo Molnar:
 "Fix leaking RCU extended quiescent state, which might trigger warnings
  and mess up the extended quiescent state tracking logic into thinking
  that we are in "RCU user mode" while we aren't."

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Fix unrecovered RCU user mode in syscall_trace_leave()
2012-12-01 13:08:36 -08:00
Frederic Weisbecker 91d1aa43d3 context_tracking: New context tracking susbsystem
Create a new subsystem that probes on kernel boundaries
to keep track of the transitions between level contexts
with two basic initial contexts: user or kernel.

This is an abstraction of some RCU code that use such tracking
to implement its userspace extended quiescent state.

We need to pull this up from RCU into this new level of indirection
because this tracking is also going to be used to implement an "on
demand" generic virtual cputime accounting. A necessary step to
shutdown the tick while still accounting the cputime.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
[ paulmck: fix whitespace error and email address. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-30 11:40:07 -08:00
H. Peter Anvin cb57a2b4cf x86-32: Export kernel_stack_pointer() for modules
Modules, in particular oprofile (and possibly other similar tools)
need kernel_stack_pointer(), so export it using EXPORT_SYMBOL_GPL().

Cc: Yang Wei <wei.yang@windriver.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Jun Zhang <jun.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20120912135059.GZ8285@erda.amd.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-20 22:23:23 -08:00
Robert Richter 1022623842 x86-32: Fix invalid stack address while in softirq
In 32 bit the stack address provided by kernel_stack_pointer() may
point to an invalid range causing NULL pointer access or page faults
while in NMI (see trace below). This happens if called in softirq
context and if the stack is empty. The address at &regs->sp is then
out of range.

Fixing this by checking if regs and &regs->sp are in the same stack
context. Otherwise return the previous stack pointer stored in struct
thread_info. If that address is invalid too, return address of regs.

 BUG: unable to handle kernel NULL pointer dereference at 0000000a
 IP: [<c1004237>] print_context_stack+0x6e/0x8d
 *pde = 00000000
 Oops: 0000 [#1] SMP
 Modules linked in:
 Pid: 4434, comm: perl Not tainted 3.6.0-rc3-oprofile-i386-standard-g4411a05 #4 Hewlett-Packard HP xw9400 Workstation/0A1Ch
 EIP: 0060:[<c1004237>] EFLAGS: 00010093 CPU: 0
 EIP is at print_context_stack+0x6e/0x8d
 EAX: ffffe000 EBX: 0000000a ECX: f4435f94 EDX: 0000000a
 ESI: f4435f94 EDI: f4435f94 EBP: f5409ec0 ESP: f5409ea0
  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
 CR0: 8005003b CR2: 0000000a CR3: 34ac9000 CR4: 000007d0
 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
 DR6: ffff0ff0 DR7: 00000400
 Process perl (pid: 4434, ti=f5408000 task=f5637850 task.ti=f4434000)
 Stack:
  000003e8 ffffe000 00001ffc f4e39b00 00000000 0000000a f4435f94 c155198c
  f5409ef0 c1003723 c155198c f5409f04 00000000 f5409edc 00000000 00000000
  f5409ee8 f4435f94 f5409fc4 00000001 f5409f1c c12dce1c 00000000 c155198c
 Call Trace:
  [<c1003723>] dump_trace+0x7b/0xa1
  [<c12dce1c>] x86_backtrace+0x40/0x88
  [<c12db712>] ? oprofile_add_sample+0x56/0x84
  [<c12db731>] oprofile_add_sample+0x75/0x84
  [<c12ddb5b>] op_amd_check_ctrs+0x46/0x260
  [<c12dd40d>] profile_exceptions_notify+0x23/0x4c
  [<c1395034>] nmi_handle+0x31/0x4a
  [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45
  [<c13950ed>] do_nmi+0xa0/0x2ff
  [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45
  [<c13949e5>] nmi_stack_correct+0x28/0x2d
  [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45
  [<c1003603>] ? do_softirq+0x4b/0x7f
  <IRQ>
  [<c102a06f>] irq_exit+0x35/0x5b
  [<c1018f56>] smp_apic_timer_interrupt+0x6c/0x7a
  [<c1394746>] apic_timer_interrupt+0x2a/0x30
 Code: 89 fe eb 08 31 c9 8b 45 0c ff 55 ec 83 c3 04 83 7d 10 00 74 0c 3b 5d 10 73 26 3b 5d e4 73 0c eb 1f 3b 5d f0 76 1a 3b 5d e8 73 15 <8b> 13 89 d0 89 55 e0 e8 ad 42 03 00 85 c0 8b 55 e0 75 a6 eb cc
 EIP: [<c1004237>] print_context_stack+0x6e/0x8d SS:ESP 0068:f5409ea0
 CR2: 000000000000000a
 ---[ end trace 62afee3481b00012 ]---
 Kernel panic - not syncing: Fatal exception in interrupt

V2:
* add comments to kernel_stack_pointer()
* always return a valid stack address by falling back to the address
  of regs

Reported-by: Yang Wei <wei.yang@windriver.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/20120912135059.GZ8285@erda.amd.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jun Zhang <jun.zhang@intel.com>
2012-11-20 22:23:20 -08:00
Frederic Weisbecker 2c5594df34 rcu: Fix unrecovered RCU user mode in syscall_trace_leave()
On x86-64 syscall exit, 3 non exclusive events may happen
looping in the following order:

1) Check if we need resched for user preemption, if so call
schedule_user()

2) Check if we have pending signals, if so call do_notify_resume()

3) Check if we do syscall tracing, if so call syscall_trace_leave()

However syscall_trace_leave() has been written assuming it directly
follows the syscall and forget about the above possible 1st and 2nd
steps.

Now schedule_user() and do_notify_resume() exit in RCU user mode
because they have most chances to resume userspace immediately and
this avoids an rcu_user_enter() call in the syscall fast path.

So by the time we call syscall_trace_leave(), we may well be in RCU
user mode. To fix this up, simply call rcu_user_exit() in the beginning
of this function.

This fixes some reported RCU uses in extended quiescent state.

Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-10-27 15:42:00 -07:00
Linus Torvalds ac07f5c3cb Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/fpu update from Ingo Molnar:
 "The biggest change is the addition of the non-lazy (eager) FPU saving
  support model and enabling it on CPUs with optimized xsaveopt/xrstor
  FPU state saving instructions.

  There are also various Sparse fixes"

Fix up trivial add-add conflict in arch/x86/kernel/traps.c

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kvm: fix kvm's usage of kernel_fpu_begin/end()
  x86, fpu: remove cpu_has_xmm check in the fx_finit()
  x86, fpu: make eagerfpu= boot param tri-state
  x86, fpu: enable eagerfpu by default for xsaveopt
  x86, fpu: decouple non-lazy/eager fpu restore from xsave
  x86, fpu: use non-lazy fpu restore for processors supporting xsave
  lguest, x86: handle guest TS bit for lazy/non-lazy fpu host models
  x86, fpu: always use kernel_fpu_begin/end() for in-kernel FPU usage
  x86, kvm: use kernel_fpu_begin/end() in kvm_load/put_guest_fpu()
  x86, fpu: remove unnecessary user_fpu_end() in save_xstate_sig()
  x86, fpu: drop_fpu() before restoring new state from sigframe
  x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels
  x86, fpu: Consolidate inline asm routines for saving/restoring fpu state
  x86, signal: Cleanup ifdefs and is_ia32, is_x32
2012-10-01 11:10:52 -07:00
Frederic Weisbecker bf5a3c13b9 x86: Syscall hooks for userspace RCU extended QS
Add syscall slow path hooks to notify syscall entry
and exit on CPUs that want to support userspace RCU
extended quiescent state.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26 15:47:04 +02:00
Suresh Siddha 72a671ced6 x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels
Currently for x86 and x86_32 binaries, fpstate in the user sigframe is copied
to/from the fpstate in the task struct.

And in the case of signal delivery for x86_64 binaries, if the fpstate is live
in the CPU registers, then the live state is copied directly to the user
sigframe. Otherwise  fpstate in the task struct is copied to the user sigframe.
During restore, fpstate in the user sigframe is restored directly to the live
CPU registers.

Historically, different code paths led to different bugs. For example,
x86_64 code path was not preemption safe till recently. Also there is lot
of code duplication for support of new features like xsave etc.

Unify signal handling code paths for x86 and x86_64 kernels.

New strategy is as follows:

Signal delivery: Both for 32/64-bit frames, align the core math frame area to
64bytes as needed by xsave (this where the main fpu/extended state gets copied
to and excludes the legacy compatibility fsave header for the 32-bit [f]xsave
frames). If the state is live, copy the register state directly to the user
frame. If not live, copy the state in the thread struct to the user frame. And
for 32-bit [f]xsave frames, construct the fsave header separately before
the actual [f]xsave area.

Signal return: As the 32-bit frames with [f]xstate has an additional
'fsave' header, copy everything back from the user sigframe to the
fpstate in the task structure and reconstruct the fxstate from the 'fsave'
header (Also user passed pointers may not be correctly aligned for
any attempt to directly restore any partial state). At the next fpstate usage,
everything will be restored to the live CPU registers.
For all the 64-bit frames and the 32-bit fsave frame, restore the state from
the user sigframe directly to the live CPU registers. 64-bit signals always
restored the math frame directly, so we can expect the math frame pointer
to be correctly aligned. For 32-bit fsave frames, there are no alignment
requirements, so we can restore the state directly.

"lat_sig catch" microbenchmark numbers (for x86, x86_64, x86_32 binaries) are
with in the noise range with this change.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1343171129-2747-4-git-send-email-suresh.b.siddha@intel.com
[ Merged in compilation fix ]
Link: http://lkml.kernel.org/r/1344544736.8326.17.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-18 15:51:48 -07:00
H.J. Lu bad1a753d4 x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32
When I added x32 ptrace to 3.4 kernel, I also include PTRACE_ARCH_PRCTL
support for x32 GDB  For ARCH_GET_FS/GS, it takes a pointer to int64.  But
at user level, ARCH_GET_FS/GS takes a pointer to int32.  So I have to add
x32 ptrace to glibc to handle it with a temporary int64 passed to kernel and
copy it back to GDB as int32.  Roland suggested that PTRACE_ARCH_PRCTL
is obsolete and x32 GDB should use fs_base and gs_base fields of
user_regs_struct instead.

Accordingly, remove PTRACE_ARCH_PRCTL completely from the x32 code to
avoid possible memory overrun when pointer to int32 is passed to
kernel.

Link: http://lkml.kernel.org/r/CAMe9rOpDzHfS7NH7m1vmD9QRw8SSj4Sc%2BaNOgcWm_WJME2eRsQ@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org> v3.4
2012-06-01 13:54:21 -07:00
Will Drewry c6cfbeb402 x86: Enable HAVE_ARCH_SECCOMP_FILTER
Enable support for seccomp filter on x86:
- syscall_get_arch()
- syscall_get_arguments()
- syscall_rollback()
- syscall_set_return_value()
- SIGSYS siginfo_t support
- secure_computing is called from a ptrace_event()-safe context
- secure_computing return value is checked (see below).

SECCOMP_RET_TRACE and SECCOMP_RET_TRAP may result in seccomp needing to
skip a system call without killing the process.  This is done by
returning a non-zero (-1) value from secure_computing.  This change
makes x86 respect that return value.

To ensure that minimal kernel code is exposed, a non-zero return value
results in an immediate return to user space (with an invalid syscall
number).

Signed-off-by: Will Drewry <wad@chromium.org>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>

v18: rebase and tweaked change description, acked-by
v17: added reviewed by and rebased
v..: all rebases since original introduction.
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-14 11:13:21 +10:00
Linus Torvalds eb05df9e7e Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Peter Anvin:
 "The biggest textual change is the cleanup to use symbolic constants
  for x86 trap values.

  The only *functional* change and the reason for the x86/x32 dependency
  is the move of is_ia32_task() into <asm/thread_info.h> so that it can
  be used in other code that needs to understand if a system call comes
  from the compat entry point (and therefore uses i386 system call
  numbers) or not.  One intended user for that is the BPF system call
  filter.  Moving it out of <asm/compat.h> means we can define it
  unconditionally, returning always true on i386."

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Move is_ia32_task to asm/thread_info.h from asm/compat.h
  x86: Rename trap_no to trap_nr in thread_struct
  x86: Use enum instead of literals for trap values
2012-03-29 18:21:35 -07:00
Linus Torvalds a591afc01d Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x32 support for x86-64 from Ingo Molnar:
 "This tree introduces the X32 binary format and execution mode for x86:
  32-bit data space binaries using 64-bit instructions and 64-bit kernel
  syscalls.

  This allows applications whose working set fits into a 32 bits address
  space to make use of 64-bit instructions while using a 32-bit address
  space with shorter pointers, more compressed data structures, etc."

Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c}

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  x32: Fix alignment fail in struct compat_siginfo
  x32: Fix stupid ia32/x32 inversion in the siginfo format
  x32: Add ptrace for x32
  x32: Switch to a 64-bit clock_t
  x32: Provide separate is_ia32_task() and is_x32_task() predicates
  x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls
  x86/x32: Fix the binutils auto-detect
  x32: Warn and disable rather than error if binutils too old
  x32: Only clear TIF_X32 flag once
  x32: Make sure TS_COMPAT is cleared for x32 tasks
  fs: Remove missed ->fds_bits from cessation use of fd_set structs internally
  fs: Fix close_on_exec pointer in alloc_fdtable
  x32: Drop non-__vdso weak symbols from the x32 VDSO
  x32: Fix coding style violations in the x32 VDSO code
  x32: Add x32 VDSO support
  x32: Allow x32 to be configured
  x32: If configured, add x32 system calls to system call tables
  x32: Handle process creation
  x32: Signal-related system calls
  x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h>
  ...
2012-03-29 18:12:23 -07:00
David Howells f05e798ad4 Disintegrate asm/system.h for X86
Disintegrate asm/system.h for X86.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
cc: x86@kernel.org
2012-03-28 18:11:12 +01:00
Srikar Dronamraju 51e7dc7011 x86: Rename trap_no to trap_nr in thread_struct
There are precedences of trap number being referred to as
trap_nr. However thread struct refers trap number as trap_no.
Change it to trap_nr.

Also use enum instead of left-over literals for trap values.

This is pure cleanup, no functional change intended.

Suggested-by: Ingo Molnar <mingo@eltu.hu>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120312092555.5379.942.sendpatchset@srdronam.in.ibm.com
[ Fixed the math-emu build ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 06:24:09 +01:00
H.J. Lu 55283e2537 x32: Add ptrace for x32
X32 ptrace is a hybrid of 64bit ptrace and compat ptrace with 32bit
address and longs.  It use 64bit ptrace to access the full 64bit
registers.  PTRACE_PEEKUSR and PTRACE_POKEUSR are only allowed to access
segment and debug registers.  PTRACE_PEEKUSR returns the lower 32bits
and PTRACE_POKEUSR zero-extends 32bit value to 64bit.   It works since
the upper 32bits of segment and debug registers of x32 process are always
zero.  GDB only uses PTRACE_PEEKUSR and PTRACE_POKEUSR to access
segment and debug registers.

[ hpa: changed TIF_X32 test to use !is_ia32_task() instead, and moved
  the system call number to the now-unused 521 slot. ]

Signed-off-by: "H.J. Lu" <hjl.tools@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/1329696488-16970-1-git-send-email-hpa@zytor.com
2012-03-05 15:43:45 -08:00
Linus Torvalds 1361b83a13 i387: Split up <asm/i387.h> into exported and internal interfaces
While various modules include <asm/i387.h> to get access to things we
actually *intend* for them to use, most of that header file was really
pretty low-level internal stuff that we really don't want to expose to
others.

So split the header file into two: the small exported interfaces remain
in <asm/i387.h>, while the internal definitions that are only used by
core architecture code are now in <asm/fpu-internal.h>.

The guiding principle for this was to expose functions that we export to
modules, and leave them in <asm/i387.h>, while stuff that is used by
task switching or was marked GPL-only is in <asm/fpu-internal.h>.

The fpu-internal.h file could be further split up too, especially since
arch/x86/kvm/ uses some of the remaining stuff for its module.  But that
kvm usage should probably be abstracted out a bit, and at least now the
internal FPU accessor functions are much more contained.  Even if it
isn't perhaps as contained as it _could_ be.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1202211340330.5354@i5.linux-foundation.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-02-21 14:12:54 -08:00
Eric Paris b05d8447e7 audit: inline audit_syscall_entry to reduce burden on archs
Every arch calls:

if (unlikely(current->audit_context))
	audit_syscall_entry()

which requires knowledge about audit (the existance of audit_context) in
the arch code.  Just do it all in static inline in audit.h so that arch's
can remain blissfully ignorant.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:16:56 -05:00
Eric Paris d7e7528bcd Audit: push audit success and retcode into arch ptrace.h
The audit system previously expected arches calling to audit_syscall_exit to
supply as arguments if the syscall was a success and what the return code was.
Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things
by converting from negative retcodes to an audit internal magic value stating
success or failure.  This helper was wrong and could indicate that a valid
pointer returned to userspace was a failed syscall.  The fix is to fix the
layering foolishness.  We now pass audit_syscall_exit a struct pt_reg and it
in turns calls back into arch code to collect the return value and to
determine if the syscall was a success or failure.  We also define a generic
is_syscall_success() macro which determines success/failure based on if the
value is < -MAX_ERRNO.  This works for arches like x86 which do not use a
separate mechanism to indicate syscall failure.

We make both the is_syscall_success() and regs_return_value() static inlines
instead of macros.  The reason is because the audit function must take a void*
for the regs.  (uml calls theirs struct uml_pt_regs instead of just struct
pt_regs so audit_syscall_exit can't take a struct pt_regs).  Since the audit
function takes a void* we need to use static inlines to cast it back to the
arch correct structure to dereference it.

The other major change is that on some arches, like ia64, MIPS and ppc, we
change regs_return_value() to give us the negative value on syscall failure.
THE only other user of this macro, kretprobe_example.c, won't notice and it
makes the value signed consistently for the audit functions across all archs.

In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old
audit code as the return value.  But the ptrace_64.h code defined the macro
regs_return_value() as regs[3].  I have no idea which one is correct, but this
patch now uses the regs_return_value() function, so it now uses regs[3].

For powerpc we previously used regs->result but now use the
regs_return_value() function which uses regs->gprs[3].  regs->gprs[3] is
always positive so the regs_return_value(), much like ia64 makes it negative
before calling the audit code when appropriate.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion]
Acked-by: Tony Luck <tony.luck@intel.com> [for ia64]
Acked-by: Richard Weinberger <richard@nod.at> [for uml]
Acked-by: David S. Miller <davem@davemloft.net> [for sparc]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
2012-01-17 16:16:56 -05:00
H Hartley Sweeten 98b8b99ae1 arch/x86/kernel/ptrace.c: Quiet sparse noise
ptrace_set_debugreg() is only used in this file and should be
static.  This also quiets the following sparse warning:

  warning: symbol 'ptrace_set_debugreg' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: hartleys@visionengravers.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05 16:48:23 +01:00
Avi Kivity 4dc0da8696 perf: Add context field to perf_event
The perf_event overflow handler does not receive any caller-derived
argument, so many callers need to resort to looking up the perf_event
in their local data structure.  This is ugly and doesn't scale if a
single callback services many perf_events.

Fix by adding a context parameter to perf_event_create_kernel_counter()
(and derived hardware breakpoints APIs) and storing it in the perf_event.
The field can be accessed from the callback as event->overflow_handler_context.
All callers are updated.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1309362157-6596-2-git-send-email-avi@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:38 +02:00
Peter Zijlstra a8b0ca17b8 perf: Remove the nmi parameter from the swevent and overflow interface
The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.

For the various event classes:

  - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
    the PMI-tail (ARM etc.)
  - tracepoint: nmi=0; since tracepoint could be from NMI context.
  - software: nmi=[0,1]; some, like the schedule thing cannot
    perform wakeups, and hence need 0.

As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).

The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:35 +02:00
Richard Weinberger 1b4ac2a935 x86: Get rid of asmregparm
As UML does no longer need asmregparm we can remove it.

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: namhyung@gmail.com
Cc: davem@davemloft.net
Cc: fweisbec@gmail.com
Cc: dhowells@redhat.com
Link: http://lkml.kernel.org/r/%3C1306189085-29896-1-git-send-email-richard%40nod.at%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-24 14:33:35 +02:00
Frederic Weisbecker 87dc669ba2 x86, hw_breakpoints: Fix racy access to ptrace breakpoints
While the tracer accesses ptrace breakpoints, the child task may
concurrently exit due to a SIGKILL and thus release its breakpoints
at the same time. We can then dereference some freed pointers.

To fix this, hold a reference on the child breakpoints before
manipulating them.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: v2.6.33.. <stable@kernel.org>
Link: http://lkml.kernel.org/r/1302284067-7860-3-git-send-email-fweisbec@gmail.com
2011-04-25 17:32:40 +02:00
Namhyung Kim eb5a369931 ptrace: cleanup arch_ptrace() on x86
Remove checking @addr less than 0 because @addr is now unsigned and
use new udescp variable in order to remove unnecessary castings.

[akpm@linux-foundation.org: fix unused variable 'udescp']
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Namhyung Kim 9b05a69e05 ptrace: change signature of arch_ptrace()
Fix up the arguments to arch_ptrace() to take account of the fact that
@addr and @data are now unsigned long rather than long as of a preceding
patch in this series.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Frederic Weisbecker 73266fc1df hw-breakpoints: Tag ptrace breakpoint as exclude_kernel
Tag ptrace breakpoints with the exclude_kernel attribute set. This
will make it easier to set generic policies on breakpoints, when it
comes to ensure nobody unpriviliged try to breakpoint on the kernel.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
2010-05-01 04:32:07 +02:00
Ingo Molnar ca7e0c6120 Merge branch 'linus' into perf/core
Semantic conflict: arch/x86/kernel/cpu/perf_event_intel_ds.c

Merge reason: pick up latest fixes, fix the conflict

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-08 13:37:18 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Peter Zijlstra faa4602e47 x86, perf, bts, mm: Delete the never used BTS-ptrace code
Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.

It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.

Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.

So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-26 11:33:55 +01:00
Jiri Kosina 318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Linus Torvalds 6f5621cb16 Merge branch 'x86-ptrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-ptrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, ptrace: Remove set_stopped_child_used_math() in [x]fpregs_set
  x86, ptrace: Simplify xstateregs_get()
  ptrace: Fix ptrace_regset() comments and diagnose errors specifically
  parisc: Disable CONFIG_HAVE_ARCH_TRACEHOOK
  ptrace: Add support for generic PTRACE_GETREGSET/PTRACE_SETREGSET
  x86, ptrace: regset extensions to support xstate
2010-02-28 10:59:44 -08:00
Linus Torvalds 6556a67435 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (172 commits)
  perf_event, amd: Fix spinlock initialization
  perf_event: Fix preempt warning in perf_clock()
  perf tools: Flush maps on COMM events
  perf_events, x86: Split PMU definitions into separate files
  perf annotate: Handle samples not at objdump output addr boundaries
  perf_events, x86: Remove superflous MSR writes
  perf_events: Simplify code by removing cpu argument to hw_perf_group_sched_in()
  perf_events, x86: AMD event scheduling
  perf_events: Add new start/stop PMU callbacks
  perf_events: Report the MMAP pgoff value in bytes
  perf annotate: Defer allocating sym_priv->hist array
  perf symbols: Improve debugging information about symtab origins
  perf top: Use a macro instead of a constant variable
  perf symbols: Check the right return variable
  perf/scripts: Tag syscall_name helper as not yet available
  perf/scripts: Add perf-trace-python Documentation
  perf/scripts: Remove unnecessary PyTuple resizes
  perf/scripts: Add syscall tracing scripts
  perf/scripts: Add Python scripting engine
  perf/scripts: Remove check-perf-trace from listed scripts
  ...

Fix trivial conflict in tools/perf/util/probe-event.c
2010-02-28 10:20:25 -08:00
Frederic Weisbecker 326264a024 hw-breakpoint: Keep track of dr7 local enable bits
When the user enables breakpoints through dr7, he can choose
between "local" or "global" enable bits but given how linux is
implemented, both have the same effect.

That said we don't keep track how the user enabled the breakpoints
so when the user requests the dr7 value, we only translate the
"enabled" status using the global enabled bits. It means that if
the user enabled a breakpoint using the local enabled bit, reading
back dr7 will set the global bit and clear the local one.

Apps like Wine expect a full dr7 POKEUSER/PEEKUSER match for emulated
softwares that implement old reverse engineering protection schemes.

We fix that by keeping track of the whole dr7 value given by the user
in the thread structure to drop this bug. We'll think about
something more proper later.

This fixes a 2.6.32 - 2.6.33-x ptrace regression.

Reported-and-tested-by: Michael Stefaniuc <mstefani@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Maneesh Soni <maneesh@linux.vnet.ibm.com>
Cc: Alexandre Julliard <julliard@winehq.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
2010-02-19 19:06:48 +01:00
Suresh Siddha 5b3efd5008 x86, ptrace: regset extensions to support xstate
Add the xstate regset support which helps extend the kernel ptrace and the
core-dump interfaces to support AVX state etc.

This regset interface is designed to support all the future state that gets
supported using xsave/xrstor infrastructure.

Looking at the memory layout saved by "xsave", one can't say which state
is represented in the memory layout. This is because if a particular state is
in init state, in the xsave hdr it can be represented by bit '0'. And hence
we can't really say by the xsave header wether a state is in init state or
the state is not saved in the memory layout.

And hence the xsave memory layout available through this regset
interface uses SW usable bytes [464..511] to convey what state is represented
in the memory layout.

First 8 bytes of the sw_usable_bytes[464..467] will be set to OS enabled xstate
mask(which is same as the 64bit mask returned by the xgetbv's xCR0).

The note NT_X86_XSTATE represents the extended state information in the
core file, using the above mentioned memory layout.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20100211195614.802495327@sbs-t61.sc.intel.com>
Signed-off-by: Hongjiu Lu <hjl.tools@gmail.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11 15:08:17 -08:00
Adam Buchbinder c9404c9c39 Fix misspelling of "should" and "shouldn't" in comments.
Some comments misspell "should" or "shouldn't"; this fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-05 12:22:30 +01:00
Masami Hiramatsu aa5add93e9 x86/ptrace: Remove unused regs_get_argument_nth API
Because of dropping function argument syntax from kprobe-tracer,
we don't need this API anymore.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@ozlabs.org
LKML-Reference: <20100105224656.19431.92588.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13 10:09:12 +01:00
Linus Torvalds 04a1e62c2c x86/ptrace: make genregs[32]_get/set more robust
The loop condition is fragile: we compare an unsigned value to zero, and
then decrement it by something larger than one in the loop.  All the
callers should be passing in appropriately aligned buffer lengths, but
it's better to just not rely on it, and have some appropriate defensive
loop limits.

Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17 07:04:56 -08:00
Oleg Nesterov d519650373 ptrace: x86: change syscall_trace_leave() to rely on tracehook when stepping
Suggested by Roland.

Unlike powepc, x86 always calls tracehook_report_syscall_exit(step) with
step = 0, and sends the trap by hand.

This results in unnecessary SIGTRAP when PTRACE_SINGLESTEP follows the
syscall-exit stop.

Change syscall_trace_leave() to pass the correct "step" argument to
tracehook and remove the send_sigtrap() logic.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:08 -08:00
Oleg Nesterov 7f38551fc3 ptrace: x86: implement user_single_step_siginfo()
Suggested by Roland.

Implement user_single_step_siginfo() for x86.  Extract this code from
send_sigtrap().

Since x86 calls tracehook_report_syscall_exit(step => 0) the new helper is
not used yet.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:08 -08:00
Frederic Weisbecker 44234adcdc hw-breakpoints: Modify breakpoints without unregistering them
Currently, when ptrace needs to modify a breakpoint, like disabling
it, changing its address, type or len, it calls
modify_user_hw_breakpoint(). This latter will perform the heavy and
racy task of unregistering the old breakpoint and registering a new
one.

This is racy as someone else might steal the reserved breakpoint
slot under us, which is undesired as the breakpoint is only
supposed to be modified, sometimes in the middle of a debugging
workflow. We don't want our slot to be stolen in the middle.

So instead of unregistering/registering the breakpoint, just
disable it while we modify its breakpoint fields and re-enable it
after if necessary.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1260347148-5519-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09 09:48:20 +01:00
Frederic Weisbecker b326e9560a hw-breakpoints: Use overflow handler instead of the event callback
struct perf_event::event callback was called when a breakpoint
triggers. But this is a rather opaque callback, pretty
tied-only to the breakpoint API and not really integrated into perf
as it triggers even when we don't overflow.

We prefer to use overflow_handler() as it fits into the perf events
rules, being called only when we overflow.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
2009-12-06 08:27:18 +01:00
Frederic Weisbecker 2f0993e0fb hw-breakpoints: Drop callback and task parameters from modify helper
Drop the callback and task parameters from modify_user_hw_breakpoint().
For now we have no user that need to modify a breakpoint to the point
of changing its handler or its task context.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
2009-12-06 08:27:17 +01:00
Frederic Weisbecker 1cedae7290 hw-breakpoints: Keep track of user disabled breakpoints
When we disable a breakpoint through dr7, we unregister it right
away, making us lose track of its corresponding address
register value.

It means that the following sequence would be unsupported:

 - set address in dr0
 - enable it through dr7
 - disable it through dr7
 - enable it through dr7

because we lost the address register value when we disabled the
breakpoint.

Don't unregister the disabled breakpoints but rather disable
them.

Reported-by: "K.Prasad" <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259735536-9236-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-02 09:59:03 +01:00
Frederic Weisbecker 5fa10b28e5 hw-breakpoints: Use struct perf_event_attr to define user breakpoints
In-kernel user breakpoints are created using functions in which
we pass breakpoint parameters as individual variables: address,
length and type.

Although it fits well for x86, this just does not scale across
archictectures that may support this api later as these may have
more or different needs. Pass in a perf_event_attr structure
instead because it is meant to evolve as much as possible into
a generic hardware breakpoint parameter structure.

Reported-by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259294154-5197-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 06:22:58 +01:00
Frederic Weisbecker 605bfaee90 hw-breakpoints: Simplify error handling in breakpoint creation requests
This simplifies the error handling when we create a breakpoint.
We don't need to check the NULL return value corner case anymore
since we have improved perf_event_create_kernel_counter() to
always return an error code in the failure case.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1259210142-5714-3-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 09:29:21 +01:00
Ingo Molnar 96200591a3 Merge branch 'tracing/hw-breakpoints' into perf/core
Conflicts:
	arch/x86/kernel/kprobes.c
	kernel/trace/Makefile

Merge reason: hw-breakpoints perf integration is looking
              good in testing and in reviews, plus conflicts
              are mounting up - so merge & resolve.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21 14:07:23 +01:00
Frederic Weisbecker 24f1e32c60 hw-breakpoints: Rewrite the hw-breakpoints layer on top of perf events
This patch rebase the implementation of the breakpoints API on top of
perf events instances.

Each breakpoints are now perf events that handle the
register scheduling, thread/cpu attachment, etc..

The new layering is now made as follows:

       ptrace       kgdb      ftrace   perf syscall
          \          |          /         /
           \         |         /         /
                                        /
            Core breakpoint API        /
                                      /
                     |               /
                     |              /

              Breakpoints perf events

                     |
                     |

               Breakpoints PMU ---- Debug Register constraints handling
                                    (Part of core breakpoint API)
                     |
                     |

             Hardware debug registers

Reasons of this rewrite:

- Use the centralized/optimized pmu registers scheduling,
  implying an easier arch integration
- More powerful register handling: perf attributes (pinned/flexible
  events, exclusive/non-exclusive, tunable period, etc...)

Impact:

- New perf ABI: the hardware breakpoints counters
- Ptrace breakpoints setting remains tricky and still needs some per
  thread breakpoints references.

Todo (in the order):

- Support breakpoints perf counter events for perf tools (ie: implement
  perf_bpcounter_event())
- Support from perf tools

Changes in v2:

- Follow the perf "event " rename
- The ptrace regression have been fixed (ptrace breakpoint perf events
  weren't released when a task ended)
- Drop the struct hw_breakpoint and store generic fields in
  perf_event_attr.
- Separate core and arch specific headers, drop
  asm-generic/hw_breakpoint.h and create linux/hw_breakpoint.h
- Use new generic len/type for breakpoint
- Handle off case: when breakpoints api is not supported by an arch

Changes in v3:

- Fix broken CONFIG_KVM, we need to propagate the breakpoint api
  changes to kvm when we exit the guest and restore the bp registers
  to the host.

Changes in v4:

- Drop the hw_breakpoint_restore() stub as it is only used by KVM
- EXPORT_SYMBOL_GPL hw_breakpoint_restore() as KVM can be built as a
  module
- Restore the breakpoints unconditionally on kvm guest exit:
  TIF_DEBUG_THREAD doesn't anymore cover every cases of running
  breakpoints and vcpu->arch.switch_db_regs might not always be
  set when the guest used debug registers.
  (Waiting for a reliable optimization)

Changes in v5:

- Split-up the asm-generic/hw-breakpoint.h moving to
  linux/hw_breakpoint.h into a separate patch
- Optimize the breakpoints restoring while switching from kvm guest
  to host. We only want to restore the state if we have active
  breakpoints to the host, otherwise we don't care about messed-up
  address registers.
- Add asm/hw_breakpoint.h to Kbuild
- Fix bad breakpoint type in trace_selftest.c

Changes in v6:

- Fix wrong header inclusion in trace.h (triggered a build
  error with CONFIG_FTRACE_SELFTEST

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
2009-11-08 15:34:42 +01:00
Frederic Weisbecker 0f8f86c7bd Merge commit 'perf/core' into perf/hw-breakpoint
Conflicts:
	kernel/Makefile
	kernel/trace/Makefile
	kernel/trace/trace.h
	samples/Makefile

Merge reason: We need to be uptodate with the perf events development
branch because we plan to rewrite the breakpoints API on top of
perf events.
2009-10-18 01:12:33 +02:00