The gdrom driver only has a single reference to the virtual address of
the bio data, and uses that only to get the physical address. Switch
to deriving the physical address from the page directly and thus avoid
bounce buffering highmem data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406061648.811275-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
from drivers/block/drbd/drbd_nl.c:24:
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’:
drivers/block/drbd/drbd_nl.c:1968:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c:930: warning: Function parameter or member 'flags' not described in 'drbd_determine_dev_size'
drivers/block/drbd/drbd_nl.c:930: warning: Function parameter or member 'rs' not described in 'drbd_determine_dev_size'
drivers/block/drbd/drbd_nl.c:1148: warning: Function parameter or member 'dc' not described in 'drbd_check_al_size'
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-12-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/block/xen-blkfront.c:1960: warning: Function parameter or member 'dev' not described in 'blkfront_probe'
drivers/block/xen-blkfront.c:1960: warning: Function parameter or member 'id' not described in 'blkfront_probe'
drivers/block/xen-blkfront.c:1960: warning: expecting prototype for Allocate the basic(). Prototype was for blkfront_probe() instead
drivers/block/xen-blkfront.c:2085: warning: Function parameter or member 'dev' not described in 'blkfront_resume'
drivers/block/xen-blkfront.c:2085: warning: expecting prototype for or a backend(). Prototype was for blkfront_resume() instead
drivers/block/xen-blkfront.c:2444: warning: wrong kernel-doc identifier on line:
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: xen-devel@lists.xenproject.org
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210312105530.2219008-11-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'op' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'op_flags' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'fault_type' not described in 'drbd_submit_peer_request'
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-10-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_main.c:278: warning: Function parameter or member 'connection' not described in 'tl_clear'
drivers/block/drbd/drbd_main.c:278: warning: Excess function parameter 'device' description in 'tl_clear'
drivers/block/drbd/drbd_main.c:489: warning: Function parameter or member 'cpu_mask' not described in 'drbd_calc_cpu_mask'
drivers/block/drbd/drbd_main.c:528: warning: Excess function parameter 'device' description in 'drbd_thread_current_set_cpu'
drivers/block/drbd/drbd_main.c:549: warning: Function parameter or member 'connection' not described in 'drbd_header_size'
drivers/block/drbd/drbd_main.c:1204: warning: Function parameter or member 'device' not described in 'send_bitmap_rle_or_plain'
drivers/block/drbd/drbd_main.c:1204: warning: Function parameter or member 'c' not described in 'send_bitmap_rle_or_plain'
drivers/block/drbd/drbd_main.c:1335: warning: Function parameter or member 'peer_device' not described in '_drbd_send_ack'
drivers/block/drbd/drbd_main.c:1335: warning: Excess function parameter 'device' description in '_drbd_send_ack'
drivers/block/drbd/drbd_main.c:1379: warning: Function parameter or member 'peer_device' not described in 'drbd_send_ack'
drivers/block/drbd/drbd_main.c:1379: warning: Excess function parameter 'device' description in 'drbd_send_ack'
drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'connection' not described in 'drbd_send_all'
drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'sock' not described in 'drbd_send_all'
drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'buffer' not described in 'drbd_send_all'
drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'size' not described in 'drbd_send_all'
drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'msg_flags' not described in 'drbd_send_all'
drivers/block/drbd/drbd_main.c:3525: warning: Function parameter or member 'flags' not described in 'drbd_queue_bitmap_io'
drivers/block/drbd/drbd_main.c:3563: warning: Function parameter or member 'flags' not described in 'drbd_bitmap_io'
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-9-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
from drivers/block/drbd/drbd_nl.c:24:
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’:
drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’:
drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’:
drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’:
drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-8-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[P_RETRY_WRITE] is initialised more than once.
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_main.c: In function ‘cmdname’:
drivers/block/drbd/drbd_main.c:3660:22: warning: initialized field overwritten [-Woverride-init]
drivers/block/drbd/drbd_main.c:3660:22: note: (near initialization for ‘cmdnames[44]’)
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-7-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_receiver.c:265: warning: Function parameter or member 'peer_device' not described in 'drbd_alloc_pages'
drivers/block/drbd/drbd_receiver.c:265: warning: Excess function parameter 'device' description in 'drbd_alloc_pages'
drivers/block/drbd/drbd_receiver.c:1362: warning: Function parameter or member 'connection' not described in 'drbd_may_finish_epoch'
drivers/block/drbd/drbd_receiver.c:1362: warning: Excess function parameter 'device' description in 'drbd_may_finish_epoch'
drivers/block/drbd/drbd_receiver.c:1451: warning: Function parameter or member 'resource' not described in 'drbd_bump_write_ordering'
drivers/block/drbd/drbd_receiver.c:1451: warning: Function parameter or member 'bdev' not described in 'drbd_bump_write_ordering'
drivers/block/drbd/drbd_receiver.c:1451: warning: Excess function parameter 'connection' description in 'drbd_bump_write_ordering'
drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'op' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'op_flags' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'fault_type' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1643: warning: Excess function parameter 'rw' description in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:3055: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_0p'
drivers/block/drbd/drbd_receiver.c:3138: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_1p'
drivers/block/drbd/drbd_receiver.c:3195: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_2p'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'peer_device' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'size' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'p' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'c' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'peer_device' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'p' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'c' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'len' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'peer_device' not described in 'decode_bitmap_c'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'p' not described in 'decode_bitmap_c'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'c' not described in 'decode_bitmap_c'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'len' not described in 'decode_bitmap_c'
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-6-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_state.c:913: warning: Function parameter or member 'connection' not described in 'is_valid_soft_transition'
drivers/block/drbd/drbd_state.c:913: warning: Excess function parameter 'device' description in 'is_valid_soft_transition'
drivers/block/drbd/drbd_state.c:1054: warning: Function parameter or member 'warn' not described in 'sanitize_state'
drivers/block/drbd/drbd_state.c:1054: warning: Excess function parameter 'warn_sync_abort' description in 'sanitize_state'
drivers/block/drbd/drbd_state.c:1703: warning: Function parameter or member 'state_change' not described in 'after_state_ch'
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-5-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/block/mtip32xx/mtip32xx.c: In function ‘mtip_standby_immediate’:
drivers/block/mtip32xx/mtip32xx.c:1216:16: warning: variable ‘start’ set but not used [-Wunused-but-set-variable]
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-4-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_interval.c:11: warning: Function parameter or member 'node' not described in 'interval_end'
drivers/block/drbd/drbd_interval.c:26: warning: Function parameter or member 'root' not described in 'drbd_insert_interval'
drivers/block/drbd/drbd_interval.c:26: warning: Function parameter or member 'this' not described in 'drbd_insert_interval'
drivers/block/drbd/drbd_interval.c:70: warning: Function parameter or member 'root' not described in 'drbd_contains_interval'
drivers/block/drbd/drbd_interval.c:96: warning: Function parameter or member 'root' not described in 'drbd_remove_interval'
drivers/block/drbd/drbd_interval.c:96: warning: Function parameter or member 'this' not described in 'drbd_remove_interval'
drivers/block/drbd/drbd_interval.c:113: warning: Function parameter or member 'root' not described in 'drbd_find_overlap'
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-3-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- fix handling of very large MDTS values (Bart Van Assche)
- retrigger ANA log update if group descriptor isn't found
(Hannes Reinecke)
- fix locking contexts in nvme-tcp and nvmet-tcp (Sagi Grimberg)
- return proper error code from discovery ctrl (Hou Pu)
- verify the SGLS field in nvmet-tcp and nvmet-fc (Max Gurtovoy)
- disallow passthru cmd from targeting a nsid != nsid of the block dev
(Niklas Cassel)
- do not allow model_number exceed 40 bytes in nvmet (Noam Gottlieb)
- enable optional queue idle period tracking in nvmet-tcp
(Mark Wunderlich)
- various cleanups and optimizations (Chaitanya Kulkarni, Kanchan Joshi)
- expose fast_io_fail_tmo in sysfs (Daniel Wagner)
- implement non-MDTS command limits (Keith Busch)
- reduce warnings for unhandled command effects (Keith Busch)
- allocate storage for the SQE as part of the nvme_request (Keith Busch)
-----BEGIN PGP SIGNATURE-----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=zRY9
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.13-2021-04-06' of git://git.infradead.org/nvme into for-5.13/drivers
Pull NVMe updates from Christoph:
"nvme updates for Linux 5.13
- fix handling of very large MDTS values (Bart Van Assche)
- retrigger ANA log update if group descriptor isn't found
(Hannes Reinecke)
- fix locking contexts in nvme-tcp and nvmet-tcp (Sagi Grimberg)
- return proper error code from discovery ctrl (Hou Pu)
- verify the SGLS field in nvmet-tcp and nvmet-fc (Max Gurtovoy)
- disallow passthru cmd from targeting a nsid != nsid of the block dev
(Niklas Cassel)
- do not allow model_number exceed 40 bytes in nvmet (Noam Gottlieb)
- enable optional queue idle period tracking in nvmet-tcp
(Mark Wunderlich)
- various cleanups and optimizations (Chaitanya Kulkarni, Kanchan Joshi)
- expose fast_io_fail_tmo in sysfs (Daniel Wagner)
- implement non-MDTS command limits (Keith Busch)
- reduce warnings for unhandled command effects (Keith Busch)
- allocate storage for the SQE as part of the nvme_request (Keith Busch)"
* tag 'nvme-5.13-2021-04-06' of git://git.infradead.org/nvme: (33 commits)
nvme: fix handling of large MDTS values
nvme: implement non-mdts command limits
nvme: disallow passthru cmd from targeting a nsid != nsid of the block dev
nvme: retrigger ANA log update if group descriptor isn't found
nvme: export fast_io_fail_tmo to sysfs
nvme: remove superfluous else in nvme_ctrl_loss_tmo_store
nvme: use sysfs_emit instead of sprintf
nvme-fc: check sgl supported by target
nvme-tcp: check sgl supported by target
nvmet-tcp: enable optional queue idle period tracking
nvmet-tcp: fix incorrect locking in state_change sk callback
nvme-tcp: block BH in sk state_change sk callback
nvmet: return proper error code from discovery ctrl
nvme: warn of unhandled effects only once
nvme: use driver pdu command for passthrough
nvme-pci: allocate nvme_command within driver pdu
nvmet: do not allow model_number exceed 40 bytes
nvmet: remove unnecessary ctrl parameter
nvmet-fc: update function documentation
nvme-fc: fix the function documentation comment
...
Instead of triggering an integer overflow and undefined behavior if MDTS is
large, set max_hw_sectors to UINT_MAX.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[hch: rebased to account for the new nvme_mps_to_sectors helper]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commands that access LBA contents without a data transfer between the
host historically have not had a spec defined upper limit. The driver
set the queue constraints for such commands to the max data transfer
size just to be safe, but this artificial constraint frequently limits
devices below their capabilities.
The NVMe Workgroup ratified TP4040 defines how a controller may
advertise their non-MDTS limits. Use these if provided and default to
the current constraints if not. Since the Dataset Management command
limits are defined in logical blocks, but without a namespace to tell us
the logical block size, the code defaults to the safe 512b size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a passthru command targets a specific namespace, the ns parameter to
nvme_user_cmd()/nvme_user_cmd64() is set. However, there is currently no
validation that the nsid specified in the passthru command targets the
namespace/nsid represented by the block device that the ioctl was
performed on.
Add a check that validates that the nsid in the passthru command matches
that of the supplied namespace.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If ANA is enabled but no ANA group descriptor is found when creating
a new namespace the ANA log is most likely out of date, so trigger
a re-read. The namespace will be tagged with the NS_ANA_PENDING flag
to exclude it from path selection until the ANA log has been re-read.
Fixes: 32acab3181 ("nvme: implement multipath access to nvme subsystems")
Reported-by: Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit 8c4dfea97f ("nvme-fabrics: reject I/O to offline device")
introduced fast_io_fail_tmo but didn't export the value to sysfs. The
value can be set during the 'nvme connect'. Export the timeout value
to user space via sysfs to allow runtime configuration.
Cc: Victor Gladkov <Victor.Gladkov@kioxia.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhaani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If there is an error we will leave the function early. So there
is no need for an else. Remove it.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
sysfs_emit is the recommended API to use for formatting strings to be
returned to user space. It is equivalent to scnprintf and aware of the
PAGE_SIZE buffer size.
Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
SGLs support is mandatory for NVMe/FC, make sure that the target is
aligned to the specification.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
SGLs support is mandatory for NVMe/tcp, make sure that the target is
aligned to the specification.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add 'idle_poll_period_usecs' option used by io_work() to support
network devices enabled with advanced interrupt moderation
supporting a relaxed interrupt model. It was discovered that
such a NIC used on the target was unable to support initiator
connection establishment, caused by the existing io_work()
flow that immediately exits after a loop with no activity and
does not re-queue itself.
With this new option a queue is assigned a period of time
that no activity must occur in order to become 'idle'. Until
the queue is idle the work item is requeued.
The new module option is defined as changeable making it
flexible for testing purposes.
The pre-existing legacy behavior is preserved when no module option
for idle_poll_period_usecs is specified.
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The TCP stack can run from process context for a long time
so we should disable BH here.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Return NVME_SC_INVALID_FIELD from discovery controller like normal
controller when executing identify or get log page command.
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We don't need to repeatedly spam the kernel logs with the same warning
about unhandled passthrough IO effects. Just one warning is sufficient
to observe this condition occurs.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
All nvme transport drivers preallocate an nvme command for each request.
Assume to use that command for nvme_setup_cmd() instead of requiring
drivers pass a pointer to it. All nvme drivers must initialize the
generic nvme_request 'cmd' to point to the transport's preallocated
nvme_command.
The generic nvme_request cmd pointer had previously been used only as a
temporary copy for passthrough commands. Since it now points to the
command that gets dispatched, passthrough commands must directly set it
up prior to executing the request.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Except for pci, all the nvme transport drivers allocate a command within
the driver's pdu. Align pci with everyone else by allocating the nvme
command within pci's pdu and replace the .queue_rq() stack variable with
this.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
According to the NVM specifications, the model number size should be
40 bytes (bytes 63:24 of the Identify Controller data structure).
Therefore, any attempt to store a value into model_number which
exceeds 40 bytes should return an error.
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Noam Gottlieb <ngottlieb@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function nvmet_ctrl_find_get() accepts out pointer to nvmet_ctrl
structure. This function returns the same error value from two places
that is :- NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR.
Move this to the caller so we can change the return type to nvmet_ctrl.
Now that we can changed the return type, instead of taking out pointer
to the nvmet_ctrl structure remove that function parameter and return
the valid nvmet_ctrl pointer on success and NULL on failure.
Also, add and rename the goto labels for more readability with comments.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add minimum description of the hosthandle parameter for
nvmet_fc_rcv_ls_req() so that we can get rid of the following warning.
drivers/nvme//target/fc.c:2009: warning: Function parameter or member 'hosthandle' not described in 'nvmet_fc_rcv_ls_req
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme_fc_rcv_ls_req() function has first argument as pointer to
remoteport named portprt, but in the documentation comment that is name
is used as remoteport. Fix that to get rid if the compilation warning.
drivers/nvme//host/fc.c:1724: warning: Function parameter or member 'portptr' not described in 'nvme_fc_rcv_ls_req'
drivers/nvme//host/fc.c:1724: warning: Excess function parameter 'remoteport' description in 'nvme_fc_rcv_ls_req'
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a new line in functions nvme_pr_preempt(), nvme_pr_clear(), and
nvme_pr_release() after variable declaration which follows the rest of
the code in the nvme/host/core.c.
No functional change(s) in this patch.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_clear_request() has a check for flag REQ_DONTPREP and it is called
from nvme_init_request() and nvme_setuo_cmd().
The function nvme_init_request() is called from nvme_alloc_request()
and nvme_alloc_request_qid(). From these two callers new request is
allocated everytime. For newly allocated request RQF_DONTPREP is never
set. Since after getting a tag, block layer sets the req->rq_flags == 0
and never sets the REQ_DONTPREP when returning the request :-
nvme_alloc_request()
blk_mq_alloc_request()
blk_mq_rq_ctx_init()
rq->rq_flags = 0 <----
nvme_alloc_request_qid()
blk_mq_alloc_request_hctx()
blk_mq_rq_ctx_init()
rq->rq_flags = 0 <----
The block layer does set req->rq_flags but REQ_DONTPREP is not one of
them and that is set by the driver.
That means we can unconditinally set the REQ_DONTPREP value to the
rq->rq_flags when nvme_init_request()->nvme_clear_request() is called
from above two callers.
Move the check for REQ_DONTPREP from nvme_clear_nvme_request() into
nvme_setup_cmd().
This is needed since nvme_alloc_request() now gets called from fast
path when NVMeOF target is configured with passthru backend to avoid
unnecessary checks in the fast path.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since nvmet_setup_passthru() function falls in fast path when called
from the NVMeOF passthru backend, make it inline.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function nvme_init_ctrl_finish() (formerly nvme_init_identify()) has
grown over the period of time about ~200 lines given the size of nvme id
ctrl data structure.
Move the nvme_id_ctrl data structure related initilzation into helper
nvme_init_identify() and call it from nvme_init_ctrl_finish().
When we move the code into nvme_init_identify() change the local
variable i from int to unsigned int and remove the duplicate kfree()
after nvme_mpath_init() and jump to the label out_free if
nvme_mpath_ini() fails.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is a prep patch so that we can move the identify data structure
related code initialization from nvme_init_identify() into a helper.
Rename the function nvmet_init_identify() to nvmet_init_ctrl_finish().
Next patch will move the nvme_id_ctrl related initialization from newly
renamed function nvme_init_ctrl_finish() into the nvme_init_identify()
helper.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For passthrough I/O commands, effects are usually to be zero.
nvme_passthrough_end() does three checks in futility for this case.
Bail out of function-call/checks.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use the proper macro instead of hard-coded value.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Instead of the using the whitespaces use tab spacing in the
nvmet_execute_identify_ns().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvmet_check_ctrl_status() cmd can be derived from nvmet_req. Remove
the local variable cmd in the nvmet_check_ctrl_status() and function
parameter cmd for nvmet_check_ctrl_status(). Derive the cmd value from
req parameter in the nvmet_check_ctrl_status().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Instead of updating the error log page in the caller of the
nvmet_alloc_ctrt() update the error log page in the nvmet_alloc_ctrl().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In the function nvmet_alloc_ctrl() we assign status value before we
call nvmet_fine_get_subsys() to:
status = NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR;
After we successfully find the subsystem we again set the status value
to:
status = NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR;
Remove the duplicate status assignment value.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Get rid of a local variable that is not needed and just return the
status directly.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The barriers were added to the nvme_irq() in commit 3a7afd8ee4
("nvme-pci: remove the CQ lock for interrupt driven queues") to prevent
compiler from doing memory optimization for the variabes that were
protected previously by spinlock in nvme_irq() at completion queue
processing and with queue head check condition.
The variable nvmeq->last_cq_head from those checks was removed in the
commit f6c4d97b0d ("nvme/pci: Remove last_cq_head") that was not
allwing poll queues from mistakenly triggering the spurious interrupt
detection.
Remove the barriers which were protecting the updates to the variables.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
->revalidate_disk is only called during add_disk for pd, but at that
point the driver has already set the capacity to the one returned from
Identify a little earlier, so this additional update is entirely
superflous.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210308074550.422714-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull MD updates from Song:
"The major changes are:
1. Performance improvement for raid10 discard requests, from Xiao Ni.
2. Fix missing information of /proc/mdstat, from Jan Glauber."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: Fix missing unused status line of /proc/mdstat
md/raid10: improve discard request for far layout
md/raid10: improve raid10 discard request
md/raid10: pull the code that wait for blocked dev into one function
md/raid10: extend r10bio devs to raid disks
md: add md_submit_discard_bio() for submitting discard bio
Christoph Hellwig
Lee Jones
Jens Axboe
Bart Van Assche
Keith Busch
Niklas Cassel
Hannes Reinecke
Daniel Wagner
Max Gurtovoy
Wunderlich, Mark
Sagi Grimberg
Hou Pu
Noam Gottlieb
Chaitanya Kulkarni
Kanchan Joshi
Shixin Liu