On Freescale i.MX7D platform, all clocks operations, including
enable/disable, rate change and re-parent, requires its parent
clock enable. Current clock core can not support it well.
This patch introduce a new flag CLK_OPS_PARENT_ENABLE to handle this
special case in clock core that enable its parent clock firstly for
each operation and disable it later after operation complete.
The patch part 1 fixes the possible disabling clocks while its parent
is off during kernel booting phase in clk_disable_unused_subtree().
Before the completion of kernel booting, clock tree is still not built
completely, there may be a case that the child clock is on but its
parent is off which could be caused by either HW initial reset state
or bootloader initialization.
Taking bootloader as an example, we may enable all clocks in HW by default.
And during kernel booting time, the parent clock could be disabled in its
driver probe due to calling clk_prepare_enable and clk_disable_unprepare.
Because it's child clock is only enabled in HW while its SW usecount
in clock tree is still 0, so clk_disable of parent clock will gate
the parent clock in both HW and SW usecount ultimately. Then there will
be a child clock is still on in HW but its parent is already off.
Later in clk_disable_unused(), this clock disable accessing while its
parent off will cause system hang due to the limitation of HW which
must require its parent on.
This patch simply enables the parent clock first before disabling
if flag CLK_OPS_PARENT_ENABLE is set in clk_disable_unused_subtree().
This is a simple solution and only affects booting time.
After kernel booting up the clock tree is already created, there will
be no case that child is off but its parent is off.
So no need do this checking for normal clk_disable() later.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
rk3228 clockids and a small fix for the not yet used spdif to
displayport clock on the rk3399.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXdbFVAAoJEPOmecmc0R2B2fEH/1Gm80XZsrXPrr0kZ2cO8Zcg
qUpOPJgZvEWJdG1EGzU34VAEAZP0y8sth46iypL+TP3UVf6Z9acZF2eeAbEvzdVY
pM6qb0eNLdrcV+aaKhAScxjEwg5kdLxc/kuwOr9XsZwE4Wqvsbmldw5O8qEU8DAP
fxdhi854hlanCVmTCfdjEpeRqv9JCejU27KttldqBC/0CwGaQwp0cUcp6Ggpv9pF
deHR5BGj2cwnPR2JmNsZ9U85kgf9/7jd4PD4UXNRG/ApuwpIb0/1ulr4YquqAcDW
OpdO6at9QmZItYS6byKNoAPKWoGXjmHYnjlENODQsCXoa6K8HkmDnxBtli6Iczw=
=6ikd
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk driver updates from Heiko Stuebner:
Placeholder for the rk3399 watchdog pclk, some newly exported
rk3228 clockids and a small fix for the not yet used spdif to
displayport clock on the rk3399.
* tag 'v4.8-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: fix incorrect rk3399 spdif-DPTX divider bits
clk: rockchip: export rk3228 MAC clocks
clk: rockchip: rename rk3228 sclk_macphy_50m to sclk_mac_extclk
clk: rockchip: export rk3228 audio clocks
clk: rockchip: include rk3228 downstream muxes into fractional dividers
clk: rockchip: fix incorrect rk3228 clock registers
clk: rockchip: add clock-ids for rk3228 MAC clocks
clk: rockchip: add clock-ids for rk3228 audio clocks
clk: rockchip: add a dummy clock for the watchdog pclk on rk3399
Fixes and enhancements mostly for Tegra210 clocks that allow DSI and
HDMI to work on Tegra X1. There's also a refactoring, including fixes,
the USB PLL.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=MxTG
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next
Pull tegra clk driver updates from Thierry Reding:
Fixes and enhancements mostly for Tegra210 clocks that allow DSI and
HDMI to work on Tegra X1. There's also a refactoring, including fixes,
the USB PLL.
* tag 'tegra-for-4.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: Initialize UTMI PLL when enabling PLLU
clk: tegra: Micro-optimize Tegra210 clock setup
clk: tegra: Make sor_safe the parent of dpaux and dpaux1
clk: tegra: Mark timer clock as critical
clk: tegra: Enable sor1 and sor1_src on Tegra210
clk: tegra: Squash sor1 safe/brick/src into a single mux
clk: tegra: Disable spread spectrum on pll_d2
clk: tegra: Fixup post dividers on Tegra210
This will be used to migrate to the clk_hw APIs.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The clk notifier symbols are hidden by COMMON_CLK. However on some
platforms HAVE_CLK might be set while COMMON_CLK not which leads to
compile test build errors like:
$ make.cross ARCH=sh
drivers/devfreq/tegra-devfreq.c: In function 'tegra_actmon_rate_notify_cb':
>> drivers/devfreq/tegra-devfreq.c:391:16: error: 'POST_RATE_CHANGE' undeclared (first use in this function)
if (action != POST_RATE_CHANGE)
^
drivers/devfreq/tegra-devfreq.c: In function 'tegra_devfreq_probe':
>> drivers/devfreq/tegra-devfreq.c:654:8: error: implicit declaration of function 'clk_notifier_register' [-Werror=implicit-function-declaration]
err = clk_notifier_register(tegra->emc_clock, &tegra->rate_change_nb);
^
Export the macros and data type declarations outside of COMMON_CLK ifdef
and provide stubs to fix the compile testing.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The gxbb clock controller is the primary clock generation unit for the
AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several
PLLs and the usual post-dividers, muxes, dividers and leaf gates that
are fed into various IP blocks in the SoC.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Remove the composite clock registration function and helpers. Replace
unnecessary configuration struct with static initialization of the
desired clock type.
To preserve git bisect this patch also flips the switch and starts using
of_clk_add_hw_provider instead of the deprecated meson_clk_register_clks
method. As a byproduct clk.c can be deleted.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
This patch exports related MAC clocks for dts reference.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch exports related i2s/spdif clocks for dts reference.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- addition of CPU clocks for CPU frequency scaling on Exynos5433 SoCs,
- additions for exynos5410 SoC required for Odroid XU board support,
- register accessors fixes for kernels built for big endian operation
(mostly exynos4 SoCs),
- Exynos5433 clock definitions fixes required for suspend to RAM and
the audio subsystem operation,
- many cleanups changing attributes of the clock initializer data
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SoGI
-----END PGP SIGNATURE-----
Merge tag 'clk-samsung-4.8' of git://linuxtv.org/snawrocki/samsung into clk-next
Merge changes from Sylwester Nawrocki for samsung clk drivers:
- a fix for exynos7 to prevent gating some critical CMU clocks,
- addition of CPU clocks for CPU frequency scaling on Exynos5433 SoCs,
- additions for exynos5410 SoC required for Odroid XU board support,
- register accessors fixes for kernels built for big endian operation
(mostly exynos4 SoCs),
- Exynos5433 clock definitions fixes required for suspend to RAM and
the audio subsystem operation,
- many cleanups changing attributes of the clock initializer data
* tag 'clk-samsung-4.8' of git://linuxtv.org/snawrocki/samsung: (41 commits)
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag to PCIE device
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flags to avoid hang during S2R
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag for AUD UART
clk: samsung: exynos4: fixup reg access on be
clk: samsung: fixup endian in pll clk
clk: samsung: exynos5410: Add WDT, ACLK266 and SSS clocks
clk: samsung: exynos5433: add CPU clocks configuration data and instantiate CPU clocks
clk: samsung: cpu: prepare for adding Exynos5433 CPU clocks
clk: samsung: exynos5433: prepare for adding CPU clocks
clk: samsung: Suppress unbinding to prevent theoretical attacks
clk: samsung: exynos5420: Set ID for aclk333 gate clock
clk: samsung: exynos5410: Add TMU clock
clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
clk: samsung: exynos5410: Add serial3, USB and PWM clocks
clk: samsung: exynos3250: Move PLL rates data to init section
clk: samsung: Fully constify mux parent names
clk: samsung: exynos5250: Move sleep init function to init section
clk: samsung: exynos5420: Move sleep init function and PLL data to init section
clk: samsung: exynos5433: Move PLL rates data to init section
clk: samsung: exynos5433: Constify all clock initializers
...
Make the sor1 and sor1_src clocks available on Tegra210. They will be
used by the display driver to support HDMI and DP.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch adds the CLK_IGNORE_UNUSED flag for PCI Express's clocks
which need to remain enabled. The 'pcie' gate clock definition is
also added.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[s.nawrocki@samsung.com: edited the patch's summary]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Add all R-Car M3-W Clock Pulse Generator Core Clock Outputs, as listed
in Table 8.2b ("List of Clocks [R-Car M3-W]") of the R-Car Gen3
datasheet (rev. 0.51 + Errata for Rev051 Mar 31 2016).
Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, and SSPSRC) are
not included, as they are used as internal clock sources only, and never
referenced from DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Add IDs for watchdog and Security SubSystem to Exynos5410. Use the same
number as for Exynos5420 just in case in future these drivers were
merged.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Now that we've gotten rid of all the users of this flag we can
retire the number, leaving a slot open for a future flag user.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add ID for TMU clock to Exynos5410. Use the same number as for
Exynos5420 just in case in future these drivers were merged.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Add IDs for I2C, USI (HSI2C) and RTC clocks to Exynos5410. Use the same
number as for Exynos5420 just in case in future these drivers are merged.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Add IDs for PWM and USB clocks to Exynos5410. Use the same number as for
Exynos5420 just in case in future these drivers were merged.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Add license and copyrights (file introduced in 2014) to header with
Exynos5410 clock IDs. Additionally reformat it to improve readability.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Pull string hash improvements from George Spelvin:
"This series does several related things:
- Makes the dcache hash (fs/namei.c) useful for general kernel use.
(Thanks to Bruce for noticing the zero-length corner case)
- Converts the string hashes in <linux/sunrpc/svcauth.h> to use the
above.
- Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two
32-bit multiplies will do well enough.
- Rids the world of the bad hash multipliers in hash_32.
This finishes the job started in commit 689de1d6ca ("Minimal
fix-up of bad hashing behavior of hash_64()")
The vast majority of Linux architectures have hardware support for
32x32-bit multiply and so derive no benefit from "simplified"
multipliers.
The few processors that do not (68000, h8/300 and some models of
Microblaze) have arch-specific implementations added. Those
patches are last in the series.
- Overhauls the dcache hash mixing.
The patch in commit 0fed3ac866 ("namei: Improve hash mixing if
CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion.
Replaced with a much more careful design that's simultaneously
faster and better. (My own invention, as there was noting suitable
in the literature I could find. Comments welcome!)
- Modify the hash_name() loop to skip the initial HASH_MIX(). This
would let us salt the hash if we ever wanted to.
- Sort out partial_name_hash().
The hash function is declared as using a long state, even though
it's truncated to 32 bits at the end and the extra internal state
contributes nothing to the result. And some callers do odd things:
- fs/hfs/string.c only allocates 32 bits of state
- fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes
- Modify bytemask_from_count to handle inputs of 1..sizeof(long)
rather than 0..sizeof(long)-1. This would simplify users other
than full_name_hash"
Special thanks to Bruce Fields for testing and finding bugs in v1. (I
learned some humbling lessons about "obviously correct" code.)
On the arch-specific front, the m68k assembly has been tested in a
standalone test harness, I've been in contact with the Microblaze
maintainers who mostly don't care, as the hardware multiplier is never
omitted in real-world applications, and I haven't heard anything from
the H8/300 world"
* 'hash' of git://ftp.sciencehorizons.net/linux:
h8300: Add <asm/hash.h>
microblaze: Add <asm/hash.h>
m68k: Add <asm/hash.h>
<linux/hash.h>: Add support for architecture-specific functions
fs/namei.c: Improve dcache hash function
Eliminate bad hash multipliers from hash_32() and hash_64()
Change hash_64() return value to 32 bits
<linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string()
fs/namei.c: Add hashlen_string() function
Pull out string hash to <linux/stringhash.h>
This is just the infrastructure; there are no users yet.
This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares
the existence of <asm/hash.h>.
That file may define its own versions of various functions, and define
HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones.
Included is a self-test (in lib/test_hash.c) that verifies the basics.
It is NOT in general required that the arch-specific functions compute
the same thing as the generic, but if a HAVE_* symbol is defined with
the value 1, then equality is tested.
Signed-off-by: George Spelvin <linux@sciencehorizons.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Philippe De Muyter <phdm@macq.eu>
Cc: linux-m68k@lists.linux-m68k.org
Cc: Alistair Francis <alistai@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp
The "simplified" prime multipliers made very bad hash functions, so get rid
of them. This completes the work of 689de1d6ca.
To avoid the inefficiency which was the motivation for the "simplified"
multipliers, hash_64() on 32-bit systems is changed to use a different
algorithm. It makes two calls to hash_32() instead.
drivers/media/usb/dvb-usb-v2/af9015.c uses the old GOLDEN_RATIO_PRIME_32
for some horrible reason, so it inherits a copy of the old definition.
Signed-off-by: George Spelvin <linux@sciencehorizons.net>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
That's all that's ever asked for, and it makes the return
type of hash_long() consistent.
It also allows (upcoming patch) an optimized implementation
of hash_64 on 32-bit machines.
I tried adding a BUILD_BUG_ON to ensure the number of bits requested
was never more than 32 (most callers use a compile-time constant), but
adding <linux/bug.h> to <linux/hash.h> breaks the tools/perf compiler
unless tools/perf/MANIFEST is updated, and understanding that code base
well enough to update it is too much trouble. I did the rest of an
allyesconfig build with such a check, and nothing tripped.
Signed-off-by: George Spelvin <linux@sciencehorizons.net>
Finally, the first use of previous two patches: eliminate the
separate ad-hoc string hash functions in the sunrpc code.
Now hash_str() is a wrapper around hash_string(), and hash_mem() is
likewise a wrapper around full_name_hash().
Note that sunrpc code *does* call hash_mem() with a zero length, which
is why the previous patch needed to handle that in full_name_hash().
(Thanks, Bruce, for finding that!)
This also eliminates the only caller of hash_long which asks for
more than 32 bits of output.
The comment about the quality of hashlen_string() and full_name_hash()
is jumping the gun by a few patches; they aren't very impressive now,
but will be improved greatly later in the series.
Signed-off-by: George Spelvin <linux@sciencehorizons.net>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: linux-nfs@vger.kernel.org
We'd like to make more use of the highly-optimized dcache hash functions
throughout the kernel, rather than have every subsystem create its own,
and a function that hashes basic null-terminated strings is required
for that.
(The name is to emphasize that it returns both hash and length.)
It's actually useful in the dcache itself, specifically d_alloc_name().
Other uses in the next patch.
full_name_hash() is also tweaked to make it more generally useful:
1) Take a "char *" rather than "unsigned char *" argument, to
be consistent with hash_name().
2) Handle zero-length inputs. If we want more callers, we don't want
to make them worry about corner cases.
Signed-off-by: George Spelvin <linux@sciencehorizons.net>
... so they can be used without the rest of <linux/dcache.h>
The hashlen_* macros will make sense next patch.
Signed-off-by: George Spelvin <linux@sciencehorizons.net>
A handful of changes this merge window:
- A few patches to fix probing and configuration of pstore
- A few patches adding Elan touchpad registration on a few devices
- EC changes: a security fix dealing with max message sizes and addition
of compat_ioctl support.
- Keyboard backlight control support
There was also an accidential duplicate registration of trackpads on 'Leon',
which was reverted just recently.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bcc4
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform
Pull chrome platform updates from Olof Johansson
"A handful of Chrome driver and binding changes this merge window:
- a few patches to fix probing and configuration of pstore
- a few patches adding Elan touchpad registration on a few devices
- EC changes: a security fix dealing with max message sizes and
addition of compat_ioctl support.
- keyboard backlight control support
There was also an accidential duplicate registration of trackpads on
'Leon', which was reverted just recently"
* tag 'chrome-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
Revert "platform/chrome: chromeos_laptop: Add Leon Touch"
platform/chrome: chromeos_laptop - Add Elan touchpad for Wolf
platform/chrome: chromeos_laptop - Add elan trackpad option for C720
platform/chrome: cros_ec_dev - Populate compat_ioctl
platform/chrome: cros_ec_lightbar - use name instead of ID to hide lightbar attributes
platform/chrome: cros_ec_dev - Fix security issue
platform/chrome: Add Chrome OS keyboard backlight LEDs support
platform/chrome: use to_platform_device()
platform/chrome: pstore: Move to larger record size.
platform/chrome: pstore: probe for ramoops buffer using acpi
platform/chrome: chromeos_laptop: Add Leon Touch
This is the second update round for 4.7-rc1. Most of changes are
about the pending ASoC updates and fixes, including a few new
drivers. Below are some highlights:
ASoC:
- New drivers for MAX98371 and TAS5720
- SPI support for TLV320AIC32x4, along with the module split
- TDM support for STI Uniperf IPs
- Remaining topology API fixes / updates
HDA:
- A couple of Dell quirks and new Realtek codec support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uNKQ
-----END PGP SIGNATURE-----
Merge tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"This is the second update round for 4.7-rc1. Most of changes are
about the pending ASoC updates and fixes, including a few new drivers.
Below are some highlights:
ASoC:
- New drivers for MAX98371 and TAS5720
- SPI support for TLV320AIC32x4, along with the module split
- TDM support for STI Uniperf IPs
- Remaining topology API fixes / updates
HDA:
- A couple of Dell quirks and new Realtek codec support"
* tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
ALSA: hda - Fix headset mic detection problem for one Dell machine
spi: spi-ep93xx: Fix the PTR_ERR() argument
ALSA: hda/realtek - Add support for ALC295/ALC3254
ASoC: kirkwood: fix build failure
ALSA: hda - Fix headphone noise on Dell XPS 13 9360
ASoC: ak4642: Enable cache usage to fix crashes on resume
ASoC: twl6040: Disconnect AUX output pads on digital mute
ASoC: tlv320aic32x4: Properly implement the positive and negative pins into the mixers
rcar: src: skip disabled-SRC nodes
ASoC: max98371 Remove duplicate entry in max98371_reg
ASoC: twl6040: Select LPPLL during standby
ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRS
ASoC: simple-card: Add pm callbacks to platform driver
ASoC: pxa: Fix module autoload for platform drivers
ASoC: topology: Fix memory leak in widget creation
ASoC: Add max98371 codec driver
ASoC: rsnd: count .probe/.remove for rsnd_mod_call()
ASoC: topology: Check size mismatch of ABI objects before parsing
ASoC: topology: Check failure to create a widget
ASoC: add support for TAS5720 digital amplifier
...
Pull SCSI target updates from Nicholas Bellinger:
"Here are the outstanding target pending updates for v4.7-rc1.
The highlights this round include:
- Allow external PR/ALUA metadata path be defined at runtime via top
level configfs attribute (Lee)
- Fix target session shutdown bug for ib_srpt multi-channel (hch)
- Make TFO close_session() and shutdown_session() optional (hch)
- Drop se_sess->sess_kref + convert tcm_qla2xxx to internal kref
(hch)
- Add tcm_qla2xxx endpoint attribute for basic FC jammer (Laurence)
- Refactor iscsi-target RX/TX PDU encode/decode into common code
(Varun)
- Extend iscsit_transport with xmit_pdu, release_cmd, get_rx_pdu,
validate_parameters, and get_r2t_ttt for generic ISO offload
(Varun)
- Initial merge of cxgb iscsi-segment offload target driver (Varun)
The bulk of the changes are Chelsio's new driver, along with a number
of iscsi-target common code improvements made by Varun + Co along the
way"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (29 commits)
iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race
cxgbit: Use type ISCSI_CXGBIT + cxgbit tpg_np attribute
iscsi-target: Convert transport drivers to signal rdma_shutdown
iscsi-target: Make iscsi_tpg_np driver show/store use generic code
tcm_qla2xxx Add SCSI command jammer/discard capability
iscsi-target: graceful disconnect on invalid mapping to iovec
target: need_to_release is always false, remove redundant check and kfree
target: remove sess_kref and ->shutdown_session
iscsi-target: remove usage of ->shutdown_session
tcm_qla2xxx: introduce a private sess_kref
target: make close_session optional
target: make ->shutdown_session optional
target: remove acl_stop
target: consolidate and fix session shutdown
cxgbit: add files for cxgbit.ko
iscsi-target: export symbols
iscsi-target: call complete on conn_logout_comp
iscsi-target: clear tx_thread_active
iscsi-target: add new offload transport type
iscsi-target: use conn_transport->transport_type in text rsp
...
- Dynamic counter infrastructure in the IB drivers
This is a sysfs based code to allow free form access to the hardware
counters RDMA devices might support so drivers don't need to code
this up repeatedly themselves
- SendOnlyFullMember multicast support
- IB router support
- A couple misc fixes
- The big item on the list: hfi1 driver updates, plus moving the hfi1
driver out of staging
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXRyupAAoJELgmozMOVy/deHAQAJp87yn8hntHXh81Kjrvezch
McJ0v7FTsfsLVe/Y+YAbaAREjanhnUDzZ36WUqS9rHadOl+Ia0fD+M53aTk9hDKS
R9/oWQDsUb8k7imdhNrSS72Q2kbwr++8RqBoEEFcl4fuDCVsrRhUaf+perJTEnoK
I9APDQCNU3FCTPFRllK5al6gi5UGEW9vO9JQZb+VnTVW9+LjlYobzcZfttAw8oRN
rtQLP3xGb7ZwV0ngH0dt2TthN2ih97TavnISojTdJ5I+WHFxLV0YbHSK/E2JLdoi
hVknhrflPIKr+mRVv97yCCz92kGAdTKG3sT9vNUVUQ0Y8kEdrW/LrnrmxsBEYzkl
GcQeqg7//ffOlQ0dGZZjlkPg/8yMPo9CBsfPDcOvXeenK0lkao9qg2yrIz+CBC/9
YlpUKfL0JLRal9O6y3Mh++ZQ9R1kvQN8/CgHLUlRQdWLfxf7VPA4rIcaWT7iGfvg
z6jIJKjsK+hqKhY9oKh3YfNmXh65IQ5OF3+tBzHKwNiGXNSsMYAVYP3vc/HYTJvz
4EpsenndKb5l0AOvDch8rMmw7YZPf2NOdi90TW6Bq1VgTIDRxh0WzR2QTnWBVRSf
XAcC3DLXTHqC/UUpHrdXgfvU/0nQXaVUvPWIAM/t3hy91GLscByDw4973+tISs/B
7AHSptbVQaBUpTjWHfKf
=5+cf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull more rdma updates from Doug Ledford:
"This is the second group of code for the 4.7 merge window. It looks
large, but only in one sense. I'll get to that in a minute. The list
of changes here breaks down as follows:
- Dynamic counter infrastructure in the IB drivers
This is a sysfs based code to allow free form access to the
hardware counters RDMA devices might support so drivers don't need
to code this up repeatedly themselves
- SendOnlyFullMember multicast support
- IB router support
- A couple misc fixes
- The big item on the list: hfi1 driver updates, plus moving the hfi1
driver out of staging
There was a group of 15 patches in the hfi1 list that I thought I had
in the first pull request but they weren't. So that added to the
length of the hfi1 section here.
As far as these go, everything but the hfi1 is pretty straight
forward.
The hfi1 is, if you recall, the driver that Al had complaints about
how it used the write/writev interfaces in an overloaded fashion. The
write portion of their interface behaved like the write handler in the
IB stack proper and did bi-directional communications. The writev
interface, on the other hand, only accepts SDMA request structures.
The completions for those structures are sent back via an entirely
different event mechanism.
With the security patch, we put security checks on the write
interface, however, we also knew they would be going away soon. Now,
we've converted the write handler in the hfi1 driver to use ioctls
from the IB reserved magic area for its bidirectional communications.
With that change, Intel has addressed all of the items originally on
their TODO when they went into staging (as well as many items added to
the list later).
As such, I moved them out, and since they were the last item in the
staging/rdma directory, and I don't have immediate plans to use the
staging area again, I removed the staging/rdma area.
Because of the move out of staging, as well as a series of 5 patches
in the hfi1 driver that removed code people thought should be done in
a different way and was optional to begin with (a snoop debug
interface, an eeprom driver for an eeprom connected directory to their
hfi1 chip and not via an i2c bus, and a few other things like that),
the line count, especially the removal count, is high"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (56 commits)
staging/rdma: Remove the entire rdma subdirectory of staging
IB/core: Make device counter infrastructure dynamic
IB/hfi1: Fix pio map initialization
IB/hfi1: Correct 8051 link parameter settings
IB/hfi1: Update pkey table properly after link down or FM start
IB/rdamvt: Fix rdmavt s_ack_queue sizing
IB/rdmavt: Max atomic value should be a u8
IB/hfi1: Fix hard lockup due to not using save/restore spin lock
IB/hfi1: Add tracing support for send with invalidate opcode
IB/hfi1, qib: Add ieth to the packet header definitions
IB/hfi1: Move driver out of staging
IB/hfi1: Do not free hfi1 cdev parent structure early
IB/hfi1: Add trace message in user IOCTL handling
IB/hfi1: Remove write(), use ioctl() for user cmds
IB/hfi1: Add ioctl() interface for user commands
IB/hfi1: Remove unused user command
IB/hfi1: Remove snoop/diag interface
IB/hfi1: Remove EPROM functionality from data device
IB/hfi1: Remove UI char device
IB/hfi1: Remove multiple device cdev
...
Pull more i2c updates from Wolfram Sang:
"Here is the second pull request from I2C for this merge window:
- one new feature (which nearly fell through the cracks): i2c-dev
does now use the cdev API so it can handle >256 minors. Seems
people do need that.
- two fixes for the just added DMA feature for i2c-rcar
- some typo fixes"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: don't start function name with 'return'
i2c: dev: switch from register_chrdev to cdev API
i2c: xlr: rename ARCH_TANGOX to ARCH_TANGO
i2c: at91: change log when dma configuration fails
misc: at24: Fix typo in at24 header file
i2c: rcar: should depend on HAS_DMA
i2c: rcar: use dma_request_chan()
Pull vfs fixes from Al Viro:
"Followups to the parallel lookup work:
- update docs
- restore killability of the places that used to take ->i_mutex
killably now that we have down_write_killable() merged
- Additionally, it turns out that I missed a prerequisite for
security_d_instantiate() stuff - ->getxattr() wasn't the only thing
that could be called before dentry is attached to inode; with smack
we needed the same treatment applied to ->setxattr() as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch ->setxattr() to passing dentry and inode separately
switch xattr_handler->set() to passing dentry and inode separately
restore killability of old mutex_lock_killable(&inode->i_mutex) users
add down_write_killable_nested()
update D/f/directory-locking
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.
Similar change for ->getxattr() had been done in commit ce23e64. Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that the allmodconfig x86-64 build is clean wrt IS_ERR_VALUE() uses
on integers, add a cast to a pointer and back to the argument, so that
any new mis-uses of IS_ERR_VALUE() will cause warnings like
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
so that we don't re-introduce any bogus uses.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The do_brk() and vm_brk() return value was "unsigned long" and returned
the starting address on success, and an error value on failure. The
reasons are entirely historical, and go back to it basically behaving
like the mmap() interface does.
However, nobody actually wanted that interface, and it causes totally
pointless IS_ERR_VALUE() confusion.
What every single caller actually wants is just the simpler integer
return of zero for success and negative error number on failure.
So just convert to that much clearer and more common calling convention,
and get rid of all the IS_ERR_VALUE() uses wrt vm_brk().
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The register_page_bootmem_info_node() function needs to be marked __init
in order to avoid a new warning introduced by commit f65e91df25 ("mm:
use early_pfn_to_nid in register_page_bootmem_info_node").
Otherwise you'll get a warning about how a non-init function calls
early_pfn_to_nid (which is __meminit)
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block fixes from Jens Axboe:
"A set of fixes that wasn't included in the first merge window pull
request. This pull request contains:
- A set of NVMe fixes from Keith, and one from Nic for the integrity
side of it.
- Fix from Ming, clearing ->mq_ops if we don't successfully setup a
queue for multiqueue.
- A set of stability fixes for bcache from Jiri, and also marking
bcache as orphaned as it's no longer actively maintained (in
mainline, at least)"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: clear q->mq_ops if init fail
MAINTAINERS: mark bcache as orphan
bcache: bch_gc_thread() is not freezable
bcache: bch_allocator_thread() is not freezable
bcache: bch_writeback_thread() is not freezable
nvme/host: Add missing blk_integrity tag_size + flags assignments
NVMe: Add device ID's with stripe quirk
NVMe: Short-cut removal on surprise hot-unplug
NVMe: Allow user initiated rescan
NVMe: Reduce driver log spamming
NVMe: Unbind driver on failure
NVMe: Delete only created queues
NVMe: Allocate queues only for online cpus
Pull drm fixes from Dave Airlie:
- one IMX built-in regression fix
- a set of amdgpu fixes, mostly powerplay and polaris GPU stuff
- a set of i915 fixes all over, many cc'ed to stable.
The i915 batch contain support for DP++ dongle detection, which is
used to fix some regressions in the HDMI color depth area
* tag 'drm-fixes-v4.7-rc1' of git://people.freedesktop.org/~airlied/linux: (44 commits)
drm/amd: add Kconfig dependency for ACP on DRM_AMDGPU
drm/amdgpu: Fix hdmi deep color support.
drm/amdgpu: fix bug in fence driver fini
drm/i915: Stop automatically retiring requests after a GPU hang
drm/i915: Unify intel_ring_begin()
drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2)
drm/i915/psr: Try to program link training times correctly
drm/imx: Match imx-ipuv3-crtc components using device node in platform data
drm/i915/bxt: Adjusting the error in horizontal timings retrieval
drm/i915: Don't leave old junk in ilk active watermarks on readout
drm/i915: s/DPPL/DPLL/ for SKL DPLLs
drm/i915: Fix gen8 semaphores id for legacy mode
drm/i915: Set crtc_state->lane_count for HDMI
drm/i915/BXT: Retrieving the horizontal timing for DSI
drm/i915: Protect gen7 irq_seqno_barrier with uncore lock
drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms
drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT
drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed
drm/i915: Respect DP++ adaptor TMDS clock limit
drm: Add helper for DP++ adaptors
...
Pull intel IOMMU updates from David Woodhouse:
"This patchset improves the scalability of the Intel IOMMU code by
resolving two spinlock bottlenecks and eliminating the linearity of
the IOVA allocator, yielding up to ~5x performance improvement and
approaching 'iommu=off' performance"
* git://git.infradead.org/intel-iommu:
iommu/vt-d: Use per-cpu IOVA caching
iommu/iova: introduce per-cpu caching to iova allocation
iommu/vt-d: change intel-iommu to use IOVA frame numbers
iommu/vt-d: avoid dev iotlb logic for domains with no dev iotlbs
iommu/vt-d: only unmap mapped entries
iommu/vt-d: correct flush_unmaps pfn usage
iommu/vt-d: per-cpu deferred invalidation queues
iommu/vt-d: refactoring of deferred flush entries
(kvm_stat had nothing to do with QEMU in the first place -- the tool
only interprets debugfs)
- expose per-vm statistics in debugfs and support them in kvm_stat
(KVM always collected per-vm statistics, but they were summarised into
global statistics)
x86:
- fix dynamic APICv (VMX was improperly configured and a guest could
access host's APIC MSRs, CVE-2016-4440)
- minor fixes
ARM changes from Christoffer Dall:
"This set of changes include the new vgic, which is a reimplementation
of our horribly broken legacy vgic implementation. The two
implementations will live side-by-side (with the new being the
configured default) for one kernel release and then we'll remove the
legacy one.
Also fixes a non-critical issue with virtual abort injection to
guests."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXRz0KAAoJEED/6hsPKofosiMIAIHmRI+9I6VMNmQe5vrZKz9/
vt89QGxDJrFQwhEuZovenLEDaY6rMIJNguyvIbPhNuXNHIIPWbe6cO6OPwByqkdo
WI/IIqcAJN/Bpwt4/Y2977A5RwDOwWLkaDs0LrZCEKPCgeh9GWQf+EfyxkDJClhG
uIgbSAU+t+7b05K3c6NbiQT/qCzDTCdl6In6PI/DFSRRkXDaTcopjjp1PmMUSSsR
AM8LGhEzMer+hGKOH7H5TIbN+HFzAPjBuDGcoZt0/w9IpmmS5OMd3ZrZ320cohz8
zZQooRcFrT0ulAe+TilckmRMJdMZ69fyw3nzfqgAKEx+3PaqjKSY/tiEgqqDJHY=
=EEBK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull second batch of KVM updates from Radim Krčmář:
"General:
- move kvm_stat tool from QEMU repo into tools/kvm/kvm_stat (kvm_stat
had nothing to do with QEMU in the first place -- the tool only
interprets debugfs)
- expose per-vm statistics in debugfs and support them in kvm_stat
(KVM always collected per-vm statistics, but they were summarised
into global statistics)
x86:
- fix dynamic APICv (VMX was improperly configured and a guest could
access host's APIC MSRs, CVE-2016-4440)
- minor fixes
ARM changes from Christoffer Dall:
- new vgic reimplementation of our horribly broken legacy vgic
implementation. The two implementations will live side-by-side
(with the new being the configured default) for one kernel release
and then we'll remove the legacy one.
- fix for a non-critical issue with virtual abort injection to guests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits)
tools: kvm_stat: Add comments
tools: kvm_stat: Introduce pid monitoring
KVM: Create debugfs dir and stat files for each VM
MAINTAINERS: Add kvm tools
tools: kvm_stat: Powerpc related fixes
tools: Add kvm_stat man page
tools: Add kvm_stat vm monitor script
kvm:vmx: more complete state update on APICv on/off
KVM: SVM: Add more SVM_EXIT_REASONS
KVM: Unify traced vector format
svm: bitwise vs logical op typo
KVM: arm/arm64: vgic-new: Synchronize changes to active state
KVM: arm/arm64: vgic-new: enable build
KVM: arm/arm64: vgic-new: implement mapped IRQ handling
KVM: arm/arm64: vgic-new: Wire up irqfd injection
KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enable
KVM: arm/arm64: vgic-new: vgic_init: implement map_resources
KVM: arm/arm64: vgic-new: vgic_init: implement vgic_init
KVM: arm/arm64: vgic-new: vgic_init: implement vgic_create
KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init
...
Really sorry about this late pull request. It looks like at the time I
sent my pull request for v4.7 there was some conflict or other issue
which caused my script to stop merging the ASoC branches at some point
after the HDMI changes.
It's all specific driver updates, including:
- New drivers for MAX98371 and TAS5720.
- SPI support for TLV320AIC32x4.
- TDM support for STI Uniperf IPs.
This code should all have been in -next prior to the merge window apart
from some fixes, it dropped out on the 18th.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXSEQkAAoJECTWi3JdVIfQsPoH/jDJ/Eo95aq2UWBqjNbGCahZ
GIiV6TsSnfbg+UIiEvnJUt0ABa0NYKbyOGUny+NC/gLUt4n3FvzGSGGXs/pkuR9R
kF07daPDyQp2uz2GFjN45JLZJV/P1ofkJTsjYnqqqup15XW7EA0F5KbTiOhd+VIc
GlgUHZGMpxVYCc9bS59ZW2V/X1Epzuh8cKD3+I1vyYo6UZbsKMPzhS3aksCM5cMO
h3uifB4hgS26x+0Yrinj0capUalmS+N7isMtL3r/c0Z8DGRiHZOZuMnfoGavNek+
qR/SbOpj2Lj6J9Xut63xtoLAo/JNj7Fk7xYxkOxlpO8+Jqk9KgEKEM/Va3xLJ+M=
=yEWH
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.7 part 2
Really sorry about this late pull request. It looks like at the time I
sent my pull request for v4.7 there was some conflict or other issue
which caused my script to stop merging the ASoC branches at some point
after the HDMI changes.
It's all specific driver updates, including:
- New drivers for MAX98371 and TAS5720.
- SPI support for TLV320AIC32x4.
- TDM support for STI Uniperf IPs.
This code should all have been in -next prior to the merge window apart
from some fixes, it dropped out on the 18th.
I see the main drm pull got merged, here's the first batch of fixes for
4.7 already. Fixes all around, a large portion cc: stable stuff.
[airlied: the DP++ stuff is a regression fix].
* tag 'drm-intel-next-fixes-2016-05-25' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Stop automatically retiring requests after a GPU hang
drm/i915: Unify intel_ring_begin()
drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2)
drm/i915/psr: Try to program link training times correctly
drm/i915/bxt: Adjusting the error in horizontal timings retrieval
drm/i915: Don't leave old junk in ilk active watermarks on readout
drm/i915: s/DPPL/DPLL/ for SKL DPLLs
drm/i915: Fix gen8 semaphores id for legacy mode
drm/i915: Set crtc_state->lane_count for HDMI
drm/i915/BXT: Retrieving the horizontal timing for DSI
drm/i915: Protect gen7 irq_seqno_barrier with uncore lock
drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms
drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT
drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed
drm/i915: Respect DP++ adaptor TMDS clock limit
drm: Add helper for DP++ adaptors
Dong Aisheng
Stephen Boyd
Masahiro Yamada
Zhangfei Gao
Krzysztof Kozlowski
Michael Turquette
Xing Zheng
Thierry Reding
Jaehoon Chung
Geert Uytterhoeven
Krzysztof Kozlowski
Linus Torvalds
George Spelvin
Al Viro
Takashi Iwai
Mark Brown
Dave Airlie