Граф коммитов

566 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 3527d3e951 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - another round of rq-clock handling debugging, robustization and
     fixes

   - PELT accounting improvements

   - CPU hotplug related ->cpus_allowed affinity handling fixes all
     around the tree

   - ... plus misc fixes, cleanups and updates"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
  sched/x86: Update reschedule warning text
  crypto: N2 - Replace racy task affinity logic
  cpufreq/sparc-us2e: Replace racy task affinity logic
  cpufreq/sparc-us3: Replace racy task affinity logic
  cpufreq/sh: Replace racy task affinity logic
  cpufreq/ia64: Replace racy task affinity logic
  ACPI/processor: Replace racy task affinity logic
  ACPI/processor: Fix error handling in __acpi_processor_start()
  sparc/sysfs: Replace racy task affinity logic
  powerpc/smp: Replace open coded task affinity logic
  ia64/sn/hwperf: Replace racy task affinity logic
  ia64/salinfo: Replace racy task affinity logic
  workqueue: Provide work_on_cpu_safe()
  ia64/topology: Remove cpus_allowed manipulation
  sched/fair: Move the PELT constants into a generated header
  sched/fair: Increase PELT accuracy for small tasks
  sched/fair: Fix comments
  sched/Documentation: Add 'sched-pelt' tool
  sched/fair: Fix corner case in __accumulate_sum()
  sched/core: Remove 'task' parameter and rename tsk_restore_flags() to current_restore_flags()
  ...
2017-05-01 19:12:53 -07:00
Linus Torvalds ad1490bcd2 Merge branch 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue update from Tejun Heo:
 "One trivial patch to use setup_deferrable_timer() instead of
  open-coding the initialization"

* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: use setup_deferrable_timer
2017-05-01 13:49:27 -07:00
Thomas Gleixner 0e8d6a9336 workqueue: Provide work_on_cpu_safe()
work_on_cpu() is not protected against CPU hotplug. For code which requires
to be either executed on an online CPU or to fail if the CPU is not
available the callsite would have to protect against CPU hotplug.

Provide a function which does get/put_online_cpus() around the call to
work_on_cpu() and fails the call with -ENODEV if the target CPU is not
online.

Preparatory patch to convert several racy task affinity manipulations.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/20170412201042.262610721@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-15 12:20:53 +02:00
Geliang Tang c30fb26b11 workqueue: use setup_deferrable_timer
Use setup_deferrable_timer() instead of init_timer_deferrable() to
simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-03-06 15:42:20 -05:00
Tejun Heo 637fdbae60 workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq
If queue_delayed_work() gets called with NULL @wq, the kernel will
oops asynchronuosly on timer expiration which isn't too helpful in
tracking down the offender.  This actually happened with smc.

__queue_delayed_work() already does several input sanity checks
synchronously.  Add NULL @wq check.

Reported-by: Dave Jones <davej@codemonkey.org.uk>
Link: http://lkml.kernel.org/r/20170227171439.jshx3qplflyrgcv7@codemonkey.org.uk
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-03-06 15:33:42 -05:00
Kees Cook dfb4357da6 time: Remove CONFIG_TIMER_STATS
Currently CONFIG_TIMER_STATS exposes process information across namespaces:

kernel/time/timer_list.c print_timer():

        SEQ_printf(m, ", %s/%d", tmp, timer->start_pid);

/proc/timer_list:

 #11: <0000000000000000>, hrtimer_wakeup, S:01, do_nanosleep, cron/2570

Given that the tracer can give the same information, this patch entirely
removes CONFIG_TIMER_STATS.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: linux-doc@vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Xing Gao <xgao01@email.wm.edu>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jessica Frazelle <me@jessfraz.com>
Cc: kernel-hardening@lists.openwall.com
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-api@vger.kernel.org
Cc: Arjan van de Ven <arjan@linux.intel.com>
Link: http://lkml.kernel.org/r/20170208192659.GA32582@beast
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10 11:15:08 +01:00
Tejun Heo 8bc4a04455 Merge branch 'for-4.9' into for-4.10 2016-10-19 12:12:40 -04:00
Tejun Heo 2186d9f940 workqueue: move wq_numa_init() to workqueue_init()
While splitting up workqueue initialization into two parts,
ac8f73400782 ("workqueue: make workqueue available early during boot")
put wq_numa_init() into workqueue_init_early().  Unfortunately, on
some archs including power and arm64, cpu to node mapping isn't yet
established by the time the early init is called leading to incorrect
NUMA initialization and subsequently the following oops due to zero
cpumask on node-specific unbound pools.

  Unable to handle kernel paging request for data at address 0x00000038
  Faulting instruction address: 0xc0000000000fc0cc
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048 NUMA PowerNV
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-compiler_gcc-6.2.0-next-20161005 #94
  task: c0000007f5400000 task.stack: c000001ffc084000
  NIP: c0000000000fc0cc LR: c0000000000ed928 CTR: c0000000000fbfd0
  REGS: c000001ffc087780 TRAP: 0300   Not tainted  (4.8.0-compiler_gcc-6.2.0-next-20161005)
  MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE>  CR: 48000424  XER: 00000000
  CFAR: c0000000000089dc DAR: 0000000000000038 DSISR: 40000000 SOFTE: 0
  GPR00: c0000000000ed928 c000001ffc087a00 c000000000e63200 c000000010d6d600
  GPR04: c0000007f5409200 0000000000000021 000000000748e08c 000000000000001f
  GPR08: 0000000000000000 0000000000000021 000000000748f1f8 0000000000000000
  GPR12: 0000000028000422 c00000000fb80000 c00000000000e0c8 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000021 0000000000000001
  GPR20: ffffffffafb50401 0000000000000000 c000000010d6d600 000000000000ba7e
  GPR24: 000000000000ba7e c000000000d8bc58 afb504000afb5041 0000000000000001
  GPR28: 0000000000000000 0000000000000004 c0000007f5409280 0000000000000000
  NIP [c0000000000fc0cc] enqueue_task_fair+0xfc/0x18b0
  LR [c0000000000ed928] activate_task+0x78/0xe0
  Call Trace:
  [c000001ffc087a00] [c0000007f5409200] 0xc0000007f5409200 (unreliable)
  [c000001ffc087b10] [c0000000000ed928] activate_task+0x78/0xe0
  [c000001ffc087b50] [c0000000000ede58] ttwu_do_activate+0x68/0xc0
  [c000001ffc087b90] [c0000000000ef1b8] try_to_wake_up+0x208/0x4f0
  [c000001ffc087c10] [c0000000000d3484] create_worker+0x144/0x250
  [c000001ffc087cb0] [c000000000cd72d0] workqueue_init+0x124/0x150
  [c000001ffc087d00] [c000000000cc0e74] kernel_init_freeable+0x158/0x360
  [c000001ffc087dc0] [c00000000000e0e4] kernel_init+0x24/0x160
  [c000001ffc087e30] [c00000000000bfa0] ret_from_kernel_thread+0x5c/0xbc
  Instruction dump:
  62940401 3b800000 3aa00000 7f17c378 3a600001 3b600001 60000000 60000000
  60420000 72490021 ebfe0150 2f890001 <ebbf0038> 419e0de0 7fbee840 419e0e58
  ---[ end trace 0000000000000000 ]---

Fix it by moving wq_numa_init() to workqueue_init().  As this means
that the early intialization may not have full NUMA info for per-cpu
pools and ignores NUMA affinity for unbound pools, fix them up from
workqueue_init() after wq_numa_init().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/87twck5wqo.fsf@concordia.ellerman.id.au
Fixes: ac8f73400782 ("workqueue: make workqueue available early during boot")
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-10-19 12:12:26 -04:00
Petr Mladek e700591ae0 kthread: rename probe_kthread_data() to kthread_probe_data()
Patch series "kthread: Kthread worker API improvements"

The intention of this patchset is to make it easier to manipulate and
maintain kthreads.  Especially, I want to replace all the custom main
cycles with a generic one.  Also I want to make the kthreads sleep in a
consistent state in a common place when there is no work.

This patch (of 11):

A good practice is to prefix the names of functions by the name of the
subsystem.

This patch fixes the name of probe_kthread_data().  The other wrong
functions names are part of the kthread worker API and will be fixed
separately.

Link: http://lkml.kernel.org/r/1470754545-17632-2-git-send-email-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Tejun Heo 863b710b66 workqueue: remove keventd_up()
keventd_up() no longer has in-kernel users.  Remove it and make
wq_online static.

Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-17 13:18:21 -04:00
Tejun Heo 3347fa0928 workqueue: make workqueue available early during boot
Workqueue is currently initialized in an early init call; however,
there are cases where early boot code has to be split and reordered to
come after workqueue initialization or the same code path which makes
use of workqueues is used both before workqueue initailization and
after.  The latter cases have to gate workqueue usages with
keventd_up() tests, which is nasty and easy to get wrong.

Workqueue usages have become widespread and it'd be a lot more
convenient if it can be used very early from boot.  This patch splits
workqueue initialization into two steps.  workqueue_init_early() which
sets up the basic data structures so that workqueues can be created
and work items queued, and workqueue_init() which actually brings up
workqueues online and starts executing queued work items.  The former
step can be done very early during boot once memory allocation,
cpumasks and idr are initialized.  The latter right after kthreads
become available.

This allows work item queueing and canceling from very early boot
which is what most of these use cases want.

* As systemd_wq being initialized doesn't indicate that workqueue is
  fully online anymore, update keventd_up() to test wq_online instead.
  The follow-up patches will get rid of all its usages and the
  function itself.

* Flushing doesn't make sense before workqueue is fully initialized.
  The flush functions trigger WARN and return immediately before fully
  online.

* Work items are never in-flight before fully online.  Canceling can
  always succeed by skipping the flush step.

* Some code paths can no longer assume to be called with irq enabled
  as irq is disabled during early boot.  Use irqsave/restore
  operations instead.

v2: Watchdog init, which requires timer to be running, moved from
    workqueue_init_early() to workqueue_init().

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/CA+55aFx0vPuMuxn00rBSM192n-Du5uxy+4AvKa0SBSOVJeuCGg@mail.gmail.com
2016-09-17 13:18:21 -04:00
Tejun Heo fa07fb6a4e workqueue: dump workqueue state on sanity check failures in destroy_workqueue()
destroy_workqueue() performs a number of sanity checks to ensure that
the workqueue is empty before proceeding with destruction.  However,
it's not always easy to tell what's going on just from the warning
message.  Let's dump workqueue state after sanity check failures to
help debugging.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/CACT4Y+Zs6vkjHo9qHb4TrEiz3S4+quvvVQ9VWvj2Mx6pETGb9Q@mail.gmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
2016-09-16 11:08:39 -04:00
Jens Axboe f72b8792d1 workqueue: add cancel_work()
Like cancel_delayed_work(), but for regular work.

Signed-off-by: Jens Axboe <axboe@fb.com>
Mehed-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
2016-08-29 08:13:21 -06:00
Linus Torvalds a6408f6cb6 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp hotplug updates from Thomas Gleixner:
 "This is the next part of the hotplug rework.

   - Convert all notifiers with a priority assigned

   - Convert all CPU_STARTING/DYING notifiers

     The final removal of the STARTING/DYING infrastructure will happen
     when the merge window closes.

  Another 700 hundred line of unpenetrable maze gone :)"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  timers/core: Correct callback order during CPU hot plug
  leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
  powerpc/numa: Convert to hotplug state machine
  arm/perf: Fix hotplug state machine conversion
  irqchip/armada: Avoid unused function warnings
  ARC/time: Convert to hotplug state machine
  clocksource/atlas7: Convert to hotplug state machine
  clocksource/armada-370-xp: Convert to hotplug state machine
  clocksource/exynos_mct: Convert to hotplug state machine
  clocksource/arm_global_timer: Convert to hotplug state machine
  rcu: Convert rcutree to hotplug state machine
  KVM/arm/arm64/vgic-new: Convert to hotplug state machine
  smp/cfd: Convert core to hotplug state machine
  x86/x2apic: Convert to CPU hotplug state machine
  profile: Convert to hotplug state machine
  timers/core: Convert to hotplug state machine
  hrtimer: Convert to hotplug state machine
  x86/tboot: Convert to hotplug state machine
  arm64/armv8 deprecated: Convert to hotplug state machine
  hwtracing/coresight-etm4x: Convert to hotplug state machine
  ...
2016-07-29 13:55:30 -07:00
Rafael J. Wysocki 7f234a4d8a Merge branches 'pm-sleep' and 'pm-tools'
* pm-sleep:
  PM / hibernate: Introduce test_resume mode for hibernation
  x86 / hibernate: Use hlt_play_dead() when resuming from hibernation
  PM / hibernate: Image data protection during restoration
  PM / hibernate: Add missing braces in __register_nosave_region()
  PM / hibernate: Clean up comments in snapshot.c
  PM / hibernate: Clean up function headers in snapshot.c
  PM / hibernate: Add missing braces in hibernate_setup()
  PM / hibernate: Recycle safe pages after image restoration
  PM / hibernate: Simplify mark_unsafe_pages()
  PM / hibernate: Do not free preallocated safe pages during image restore
  PM / suspend: show workqueue state in suspend flow
  PM / sleep: make PM notifiers called symmetrically
  PM / sleep: Make pm_prepare_console() return void
  PM / Hibernate: Don't let kasan instrument snapshot.c

* pm-tools:
  PM / tools: scripts: AnalyzeSuspend v4.2
  tools/turbostat: allow user to alter DESTDIR and PREFIX
2016-07-25 13:44:32 +02:00
Thomas Gleixner 7ee681b252 workqueue: Convert to state machine callbacks
Get rid of the prio ordering of the separate notifiers and use a proper state
callback pair.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153335.197083890@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14 09:34:43 +02:00
Roger Lu 7b776af66d PM / suspend: show workqueue state in suspend flow
If freezable workqueue aborts suspend flow, show
workqueue state for debug purpose.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-02 01:42:48 +02:00
Peter Zijlstra d945b5e9f0 workqueue: Fix setting affinity of unbound worker threads
With commit e9d867a67f ("sched: Allow per-cpu kernel threads to
run on online && !active"), __set_cpus_allowed_ptr() expects that only
strict per-cpu kernel threads can have affinity to an online CPU which
is not yet active.

This assumption is currently broken in the CPU_ONLINE notification
handler for the workqueues where restore_unbound_workers_cpumask()
calls set_cpus_allowed_ptr() when the first cpu in the unbound
worker's pool->attr->cpumask comes online. Since
set_cpus_allowed_ptr() is called with pool->attr->cpumask in which
only one CPU is online which is not yet active, we get the following
WARN_ON during an CPU online operation.

------------[ cut here ]------------
WARNING: CPU: 40 PID: 248 at kernel/sched/core.c:1166
__set_cpus_allowed_ptr+0x228/0x2e0
Modules linked in:
CPU: 40 PID: 248 Comm: cpuhp/40 Not tainted 4.6.0-autotest+ #4
<..snip..>
Call Trace:
[c000000f273ff920] [c00000000010493c] __set_cpus_allowed_ptr+0x2cc/0x2e0 (unreliable)
[c000000f273ffac0] [c0000000000ed4b0] workqueue_cpu_up_callback+0x2c0/0x470
[c000000f273ffb70] [c0000000000f5c58] notifier_call_chain+0x98/0x100
[c000000f273ffbc0] [c0000000000c5ed0] __cpu_notify+0x70/0xe0
[c000000f273ffc00] [c0000000000c6028] notify_online+0x38/0x50
[c000000f273ffc30] [c0000000000c5214] cpuhp_invoke_callback+0x84/0x250
[c000000f273ffc90] [c0000000000c562c] cpuhp_up_callbacks+0x5c/0x120
[c000000f273ffce0] [c0000000000c64d4] cpuhp_thread_fun+0x184/0x1c0
[c000000f273ffd20] [c0000000000fa050] smpboot_thread_fn+0x290/0x2a0
[c000000f273ffd80] [c0000000000f45b0] kthread+0x110/0x130
[c000000f273ffe30] [c000000000009570] ret_from_kernel_thread+0x5c/0x6c
---[ end trace 00f1456578b2a3b2 ]---

This patch fixes this by limiting the mask to the intersection of
the pool affinity and online CPUs.

Changelog-cribbed-from: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-16 15:37:05 -04:00
Du, Changbin b9fdac7f66 debugobjects: insulate non-fixup logic related to static obj from fixup callbacks
When activating a static object we need make sure that the object is
tracked in the object tracker.  If it is a non-static object then the
activation is illegal.

In previous implementation, each subsystem need take care of this in
their fixup callbacks.  Actually we can put it into debugobjects core.
Thus we can save duplicated code, and have *pure* fixup callbacks.

To achieve this, a new callback "is_static_object" is introduced to let
the type specific code decide whether a object is static or not.  If
yes, we take it into object tracker, otherwise give warning and invoke
fixup callback.

This change has paassed debugobjects selftest, and I also do some test
with all debugobjects supports enabled.

At last, I have a concern about the fixups that can it change the object
which is in incorrect state on fixup? Because the 'addr' may not point
to any valid object if a non-static object is not tracked.  Then Change
such object can overwrite someone's memory and cause unexpected
behaviour.  For example, the timer_fixup_activate bind timer to function
stub_timer.

Link: http://lkml.kernel.org/r/1462576157-14539-1-git-send-email-changbin.du@intel.com
[changbin.du@intel.com: improve code comments where invoke the new is_static_object callback]
  Link: http://lkml.kernel.org/r/1462777431-8171-1-git-send-email-changbin.du@intel.com
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19 19:12:14 -07:00
Du, Changbin 02a982a6ec workqueue: update debugobjects fixup callbacks return type
Update the return type to use bool instead of int, corresponding to
change (debugobjects: make fixup functions return bool instead of int)

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19 19:12:14 -07:00
Linus Torvalds da92223908 Merge branch 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
 "CPU hotplug callbacks can invoke DOWN_FAILED w/o preceding
  DOWN_PREPARE which can trigger a WARN_ON() in workqueue.

  The bug has been there for a very long time.  It only triggers if CPU
  down fails at a specific point and I don't think it has adverse
  effects other than the warning messages.  The fix is very low impact"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix rebind bound workers warning
2016-05-13 16:16:51 -07:00
Wanpeng Li f7c17d26f4 workqueue: fix rebind bound workers warning
------------[ cut here ]------------
WARNING: CPU: 0 PID: 16 at kernel/workqueue.c:4559 rebind_workers+0x1c0/0x1d0
Modules linked in:
CPU: 0 PID: 16 Comm: cpuhp/0 Not tainted 4.6.0-rc4+ #31
Hardware name: IBM IBM System x3550 M4 Server -[7914IUW]-/00Y8603, BIOS -[D7E128FUS-1.40]- 07/23/2013
 0000000000000000 ffff881037babb58 ffffffff8139d885 0000000000000010
 0000000000000000 0000000000000000 0000000000000000 ffff881037babba8
 ffffffff8108505d ffff881037ba0000 000011cf3e7d6e60 0000000000000046
Call Trace:
 dump_stack+0x89/0xd4
 __warn+0xfd/0x120
 warn_slowpath_null+0x1d/0x20
 rebind_workers+0x1c0/0x1d0
 workqueue_cpu_up_callback+0xf5/0x1d0
 notifier_call_chain+0x64/0x90
 ? trace_hardirqs_on_caller+0xf2/0x220
 ? notify_prepare+0x80/0x80
 __raw_notifier_call_chain+0xe/0x10
 __cpu_notify+0x35/0x50
 notify_down_prepare+0x5e/0x80
 ? notify_prepare+0x80/0x80
 cpuhp_invoke_callback+0x73/0x330
 ? __schedule+0x33e/0x8a0
 cpuhp_down_callbacks+0x51/0xc0
 cpuhp_thread_fun+0xc1/0xf0
 smpboot_thread_fn+0x159/0x2a0
 ? smpboot_create_threads+0x80/0x80
 kthread+0xef/0x110
 ? wait_for_completion+0xf0/0x120
 ? schedule_tail+0x35/0xf0
 ret_from_fork+0x22/0x50
 ? __init_kthread_worker+0x70/0x70
---[ end trace eb12ae47d2382d8f ]---
notify_down_prepare: attempt to take down CPU 0 failed

This bug can be reproduced by below config w/ nohz_full= all cpus:

CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_NO_HZ_FULL=y

As Thomas pointed out:

| If a down prepare callback fails, then DOWN_FAILED is invoked for all
| callbacks which have successfully executed DOWN_PREPARE.
|
| But, workqueue has actually two notifiers. One which handles
| UP/DOWN_FAILED/ONLINE and one which handles DOWN_PREPARE.
|
| Now look at the priorities of those callbacks:
|
| CPU_PRI_WORKQUEUE_UP        = 5
| CPU_PRI_WORKQUEUE_DOWN      = -5
|
| So the call order on DOWN_PREPARE is:
|
| CB 1
| CB ...
| CB workqueue_up() -> Ignores DOWN_PREPARE
| CB ...
| CB X ---> Fails
|
| So we call up to CB X with DOWN_FAILED
|
| CB 1
| CB ...
| CB workqueue_up() -> Handles DOWN_FAILED
| CB ...
| CB X-1
|
| So the problem is that the workqueue stuff handles DOWN_FAILED in the up
| callback, while it should do it in the down callback. Which is not a good idea
| either because it wants to be called early on rollback...
|
| Brilliant stuff, isn't it? The hotplug rework will solve this problem because
| the callbacks become symetric, but for the existing mess, we need some
| workaround in the workqueue code.

The boot CPU handles housekeeping duty(unbound timers, workqueues,
timekeeping, ...) on behalf of full dynticks CPUs. It must remain
online when nohz full is enabled. There is a priority set to every
notifier_blocks:

workqueue_cpu_up > tick_nohz_cpu_down > workqueue_cpu_down

So tick_nohz_cpu_down callback failed when down prepare cpu 0, and
notifier_blocks behind tick_nohz_cpu_down will not be called any
more, which leads to workers are actually not unbound. Then hotplug
state machine will fallback to undo and online cpu 0 again. Workers
will be rebound unconditionally even if they are not unbound and
trigger the warning in this progress.

This patch fix it by catching !DISASSOCIATED to avoid rebind bound
workers.

Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org
Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
2016-05-12 12:00:23 -04:00
Linus Torvalds b75a2bf899 Merge branch 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
 "So, it turns out we had a silly bug in the most fundamental part of
  workqueue for a very long time.  AFAICS, this dates back to pre-git
  era and has quite likely been there from the time workqueue was first
  introduced.

  A work item uses its PENDING bit to synchronize multiple queuers.
  Anyone who wins the PENDING bit owns the pending state of the work
  item.  Whether a queuer wins or loses the race, one thing should be
  guaranteed - there will soon be at least one execution of the work
  item - where "after" means that the execution instance would be able
  to see all the changes that the queuer has made prior to the queueing
  attempt.

  Unfortunately, we were missing a smp_mb() after clearing PENDING for
  execution, so nothing guaranteed visibility of the changes that a
  queueing loser has made, which manifested as a reproducible blk-mq
  stall.

  Lots of kudos to Roman for debugging the problem.  The patch for
  -stable is the minimal one.  For v3.7, Peter is working on a patch to
  make the code path slightly more efficient and less fragile"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix ghost PENDING flag while doing MQ IO
2016-04-27 12:03:59 -07:00
Roman Pen 346c09f804 workqueue: fix ghost PENDING flag while doing MQ IO
The bug in a workqueue leads to a stalled IO request in MQ ctx->rq_list
with the following backtrace:

[  601.347452] INFO: task kworker/u129:5:1636 blocked for more than 120 seconds.
[  601.347574]       Tainted: G           O    4.4.5-1-storage+ #6
[  601.347651] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  601.348142] kworker/u129:5  D ffff880803077988     0  1636      2 0x00000000
[  601.348519] Workqueue: ibnbd_server_fileio_wq ibnbd_dev_file_submit_io_worker [ibnbd_server]
[  601.348999]  ffff880803077988 ffff88080466b900 ffff8808033f9c80 ffff880803078000
[  601.349662]  ffff880807c95000 7fffffffffffffff ffffffff815b0920 ffff880803077ad0
[  601.350333]  ffff8808030779a0 ffffffff815b01d5 0000000000000000 ffff880803077a38
[  601.350965] Call Trace:
[  601.351203]  [<ffffffff815b0920>] ? bit_wait+0x60/0x60
[  601.351444]  [<ffffffff815b01d5>] schedule+0x35/0x80
[  601.351709]  [<ffffffff815b2dd2>] schedule_timeout+0x192/0x230
[  601.351958]  [<ffffffff812d43f7>] ? blk_flush_plug_list+0xc7/0x220
[  601.352208]  [<ffffffff810bd737>] ? ktime_get+0x37/0xa0
[  601.352446]  [<ffffffff815b0920>] ? bit_wait+0x60/0x60
[  601.352688]  [<ffffffff815af784>] io_schedule_timeout+0xa4/0x110
[  601.352951]  [<ffffffff815b3a4e>] ? _raw_spin_unlock_irqrestore+0xe/0x10
[  601.353196]  [<ffffffff815b093b>] bit_wait_io+0x1b/0x70
[  601.353440]  [<ffffffff815b056d>] __wait_on_bit+0x5d/0x90
[  601.353689]  [<ffffffff81127bd0>] wait_on_page_bit+0xc0/0xd0
[  601.353958]  [<ffffffff81096db0>] ? autoremove_wake_function+0x40/0x40
[  601.354200]  [<ffffffff81127cc4>] __filemap_fdatawait_range+0xe4/0x140
[  601.354441]  [<ffffffff81127d34>] filemap_fdatawait_range+0x14/0x30
[  601.354688]  [<ffffffff81129a9f>] filemap_write_and_wait_range+0x3f/0x70
[  601.354932]  [<ffffffff811ced3b>] blkdev_fsync+0x1b/0x50
[  601.355193]  [<ffffffff811c82d9>] vfs_fsync_range+0x49/0xa0
[  601.355432]  [<ffffffff811cf45a>] blkdev_write_iter+0xca/0x100
[  601.355679]  [<ffffffff81197b1a>] __vfs_write+0xaa/0xe0
[  601.355925]  [<ffffffff81198379>] vfs_write+0xa9/0x1a0
[  601.356164]  [<ffffffff811c59d8>] kernel_write+0x38/0x50

The underlying device is a null_blk, with default parameters:

  queue_mode    = MQ
  submit_queues = 1

Verification that nullb0 has something inflight:

root@pserver8:~# cat /sys/block/nullb0/inflight
       0        1
root@pserver8:~# find /sys/block/nullb0/mq/0/cpu* -name rq_list -print -exec cat {} \;
...
/sys/block/nullb0/mq/0/cpu2/rq_list
CTX pending:
        ffff8838038e2400
...

During debug it became clear that stalled request is always inserted in
the rq_list from the following path:

   save_stack_trace_tsk + 34
   blk_mq_insert_requests + 231
   blk_mq_flush_plug_list + 281
   blk_flush_plug_list + 199
   wait_on_page_bit + 192
   __filemap_fdatawait_range + 228
   filemap_fdatawait_range + 20
   filemap_write_and_wait_range + 63
   blkdev_fsync + 27
   vfs_fsync_range + 73
   blkdev_write_iter + 202
   __vfs_write + 170
   vfs_write + 169
   kernel_write + 56

So blk_flush_plug_list() was called with from_schedule == true.

If from_schedule is true, that means that finally blk_mq_insert_requests()
offloads execution of __blk_mq_run_hw_queue() and uses kblockd workqueue,
i.e. it calls kblockd_schedule_delayed_work_on().

That means, that we race with another CPU, which is about to execute
__blk_mq_run_hw_queue() work.

Further debugging shows the following traces from different CPUs:

  CPU#0                                  CPU#1
  ----------------------------------     -------------------------------
  reqeust A inserted
  STORE hctx->ctx_map[0] bit marked
  kblockd_schedule...() returns 1
  <schedule to kblockd workqueue>
                                         request B inserted
                                         STORE hctx->ctx_map[1] bit marked
                                         kblockd_schedule...() returns 0
  *** WORK PENDING bit is cleared ***
  flush_busy_ctxs() is executed, but
  bit 1, set by CPU#1, is not observed

As a result request B pended forever.

This behaviour can be explained by speculative LOAD of hctx->ctx_map on
CPU#0, which is reordered with clear of PENDING bit and executed _before_
actual STORE of bit 1 on CPU#1.

The proper fix is an explicit full barrier <mfence>, which guarantees
that clear of PENDING bit is to be executed before all possible
speculative LOADS or STORES inside actual work function.

Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Gioh Kim <gi-oh.kim@profitbricks.com>
Cc: Michael Wang <yun.wang@profitbricks.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-26 11:23:22 -04:00
Linus Torvalds ef504fa591 Merge branch 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
 "Three trivial workqueue changes"

* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix comment for work_on_cpu()
  sched/core: Get rid of 'cpu' argument in wq_worker_sleeping()
  workqueue: Replace usage of init_name with dev_set_name()
2016-03-18 20:05:39 -07:00
Peter Zijlstra 25528213fe tags: Fix DEFINE_PER_CPU expansions
$ make tags
  GEN     tags
ctags: Warning: drivers/acpi/processor_idle.c:64: null expansion of name pattern "\1"
ctags: Warning: drivers/xen/events/events_2l.c:41: null expansion of name pattern "\1"
ctags: Warning: kernel/locking/lockdep.c:151: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:133: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:135: null expansion of name pattern "\1"
ctags: Warning: kernel/workqueue.c:323: null expansion of name pattern "\1"
ctags: Warning: net/ipv4/syncookies.c:53: null expansion of name pattern "\1"
ctags: Warning: net/ipv6/syncookies.c:44: null expansion of name pattern "\1"
ctags: Warning: net/rds/page.c:45: null expansion of name pattern "\1"

Which are all the result of the DEFINE_PER_CPU pattern:

  scripts/tags.sh:200:	'/\<DEFINE_PER_CPU([^,]*, *\([[:alnum:]_]*\)/\1/v/'
  scripts/tags.sh:201:	'/\<DEFINE_PER_CPU_SHARED_ALIGNED([^,]*, *\([[:alnum:]_]*\)/\1/v/'

The below cures them. All except the workqueue one are within reasonable
distance of the 80 char limit. TJ do you have any preference on how to
fix the wq one, or shall we just not care its too long?

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 16:55:16 -07:00
Anna-Maria Gleixner 22aceb3176 workqueue: Fix comment for work_on_cpu()
Function is processed in thread context, not in user context.

Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-11 12:39:01 -05:00
Alexander Gordeev 9b7f6597f0 sched/core: Get rid of 'cpu' argument in wq_worker_sleeping()
Given that wq_worker_sleeping() could only be called for a
CPU it is running on, we do not need passing a CPU ID as an
argument.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-02 10:28:47 -05:00
Lars-Peter Clausen 23217b443b workqueue: Replace usage of init_name with dev_set_name()
The init_name property of the device struct is sort of a hack and should
only be used for statically allocated devices. Since the device is
dynamically allocated here it is safe to use the proper way to set a
devices name by calling dev_set_name().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-17 16:14:18 -05:00
Tejun Heo d6e022f1d2 workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup
When looking up the pool_workqueue to use for an unbound workqueue,
workqueue assumes that the target CPU is always bound to a valid NUMA
node.  However, currently, when a CPU goes offline, the mapping is
destroyed and cpu_to_node() returns NUMA_NO_NODE.

This has always been broken but hasn't triggered often enough before
874bbfe600 ("workqueue: make sure delayed work run in local cpu").
After the commit, workqueue forcifully assigns the local CPU for
delayed work items without explicit target CPU to fix a different
issue.  This widens the window where CPU can go offline while a
delayed work item is pending causing delayed work items dispatched
with target CPU set to an already offlined CPU.  The resulting
NUMA_NO_NODE mapping makes workqueue try to queue the work item on a
NULL pool_workqueue and thus crash.

While 874bbfe600 has been reverted for a different reason making the
bug less visible again, it can still happen.  Fix it by mapping
NUMA_NO_NODE to the default pool_workqueue from unbound_pwq_by_node().
This is a temporary workaround.  The long term solution is keeping CPU
-> NODE mapping stable across CPU off/online cycles which is being
worked on.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/g/1454424264.11183.46.camel@gmail.com
Link: http://lkml.kernel.org/g/1453702100-2597-1-git-send-email-tangchen@cn.fujitsu.com
2016-02-10 12:13:05 -05:00
Tejun Heo f303fccb82 workqueue: implement "workqueue.debug_force_rr_cpu" debug feature
Workqueue used to guarantee local execution for work items queued
without explicit target CPU.  The guarantee is gone now which can
break some usages in subtle ways.  To flush out those cases, this
patch implements a debug feature which forces round-robin CPU
selection for all such work items.

The debug feature defaults to off and can be enabled with a kernel
parameter.  The default can be flipped with a debug config option.

If you hit this commit during bisection, please refer to 041bd12e27
("Revert "workqueue: make sure delayed work run in local cpu"") for
more information and ping me.

Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-09 17:59:38 -05:00
Mike Galbraith ef55718044 workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs
WORK_CPU_UNBOUND work items queued to a bound workqueue always run
locally.  This is a good thing normally, but not when the user has
asked us to keep unbound work away from certain CPUs.  Round robin
these to wq_unbound_cpumask CPUs instead, as perturbation avoidance
trumps performance.

tj: Cosmetic and comment changes.  WARN_ON_ONCE() dropped from empty
    (wq_unbound_cpumask AND cpu_online_mask).  If we want that, it
    should be done when config changes.

Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-09 17:59:38 -05:00
Tejun Heo 041bd12e27 Revert "workqueue: make sure delayed work run in local cpu"
This reverts commit 874bbfe600.

Workqueue used to implicity guarantee that work items queued without
explicit CPU specified are put on the local CPU.  Recent changes in
timer broke the guarantee and led to vmstat breakage which was fixed
by 176bed1de5 ("vmstat: explicitly schedule per-cpu work on the CPU
we need it to run on").

vmstat is the most likely to expose the issue and it's quite possible
that there are other similar problems which are a lot more difficult
to trigger.  As a preventive measure, 874bbfe600 ("workqueue: make
sure delayed work run in local cpu") was applied to restore the local
CPU guarnatee.  Unfortunately, the change exposed a bug in timer code
which got fixed by 22b886dd10 ("timers: Use proper base migration in
add_timer_on()").  Due to code restructuring, the commit couldn't be
backported beyond certain point and stable kernels which only had
874bbfe600 started crashing.

The local CPU guarantee was accidental more than anything else and we
want to get rid of it anyway.  As, with the vmstat case fixed,
874bbfe600 is causing more problems than it's fixing, it has been
decided to take the chance and officially break the guarantee by
reverting the commit.  A debug feature will be added to force foreign
CPU assignment to expose cases relying on the guarantee and fixes for
the individual cases will be backported to stable as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 874bbfe600 ("workqueue: make sure delayed work run in local cpu")
Link: http://lkml.kernel.org/g/20160120211926.GJ10810@quack.suse.cz
Cc: stable@vger.kernel.org
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Daniel Bilik <daniel.bilik@neosystem.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Shaohua Li <shli@fb.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Bilik <daniel.bilik@neosystem.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
2016-02-09 16:11:26 -05:00
Tejun Heo 23d11a58a9 workqueue: skip flush dependency checks for legacy workqueues
fca839c00a ("workqueue: warn if memory reclaim tries to flush
!WQ_MEM_RECLAIM workqueue") implemented flush dependency warning which
triggers if a PF_MEMALLOC task or WQ_MEM_RECLAIM workqueue tries to
flush a !WQ_MEM_RECLAIM workquee.

This assumes that workqueues marked with WQ_MEM_RECLAIM sit in memory
reclaim path and making it depend on something which may need more
memory to make forward progress can lead to deadlocks.  Unfortunately,
workqueues created with the legacy create*_workqueue() interface
always have WQ_MEM_RECLAIM regardless of whether they are depended
upon memory reclaim or not.  These spurious WQ_MEM_RECLAIM markings
cause spurious triggering of the flush dependency checks.

  WARNING: CPU: 0 PID: 6 at kernel/workqueue.c:2361 check_flush_dependency+0x138/0x144()
  workqueue: WQ_MEM_RECLAIM deferwq:deferred_probe_work_func is flushing !WQ_MEM_RECLAIM events:lru_add_drain_per_cpu
  ...
  Workqueue: deferwq deferred_probe_work_func
  [<c0017acc>] (unwind_backtrace) from [<c0013134>] (show_stack+0x10/0x14)
  [<c0013134>] (show_stack) from [<c0245f18>] (dump_stack+0x94/0xd4)
  [<c0245f18>] (dump_stack) from [<c0026f9c>] (warn_slowpath_common+0x80/0xb0)
  [<c0026f9c>] (warn_slowpath_common) from [<c0026ffc>] (warn_slowpath_fmt+0x30/0x40)
  [<c0026ffc>] (warn_slowpath_fmt) from [<c00390b8>] (check_flush_dependency+0x138/0x144)
  [<c00390b8>] (check_flush_dependency) from [<c0039ca0>] (flush_work+0x50/0x15c)
  [<c0039ca0>] (flush_work) from [<c00c51b0>] (lru_add_drain_all+0x130/0x180)
  [<c00c51b0>] (lru_add_drain_all) from [<c00f728c>] (migrate_prep+0x8/0x10)
  [<c00f728c>] (migrate_prep) from [<c00bfbc4>] (alloc_contig_range+0xd8/0x338)
  [<c00bfbc4>] (alloc_contig_range) from [<c00f8f18>] (cma_alloc+0xe0/0x1ac)
  [<c00f8f18>] (cma_alloc) from [<c001cac4>] (__alloc_from_contiguous+0x38/0xd8)
  [<c001cac4>] (__alloc_from_contiguous) from [<c001ceb4>] (__dma_alloc+0x240/0x278)
  [<c001ceb4>] (__dma_alloc) from [<c001cf78>] (arm_dma_alloc+0x54/0x5c)
  [<c001cf78>] (arm_dma_alloc) from [<c0355ea4>] (dmam_alloc_coherent+0xc0/0xec)
  [<c0355ea4>] (dmam_alloc_coherent) from [<c039cc4c>] (ahci_port_start+0x150/0x1dc)
  [<c039cc4c>] (ahci_port_start) from [<c0384734>] (ata_host_start.part.3+0xc8/0x1c8)
  [<c0384734>] (ata_host_start.part.3) from [<c03898dc>] (ata_host_activate+0x50/0x148)
  [<c03898dc>] (ata_host_activate) from [<c039d558>] (ahci_host_activate+0x44/0x114)
  [<c039d558>] (ahci_host_activate) from [<c039f05c>] (ahci_platform_init_host+0x1d8/0x3c8)
  [<c039f05c>] (ahci_platform_init_host) from [<c039e6bc>] (tegra_ahci_probe+0x448/0x4e8)
  [<c039e6bc>] (tegra_ahci_probe) from [<c0347058>] (platform_drv_probe+0x50/0xac)
  [<c0347058>] (platform_drv_probe) from [<c03458cc>] (driver_probe_device+0x214/0x2c0)
  [<c03458cc>] (driver_probe_device) from [<c0343cc0>] (bus_for_each_drv+0x60/0x94)
  [<c0343cc0>] (bus_for_each_drv) from [<c03455d8>] (__device_attach+0xb0/0x114)
  [<c03455d8>] (__device_attach) from [<c0344ab8>] (bus_probe_device+0x84/0x8c)
  [<c0344ab8>] (bus_probe_device) from [<c0344f48>] (deferred_probe_work_func+0x68/0x98)
  [<c0344f48>] (deferred_probe_work_func) from [<c003b738>] (process_one_work+0x120/0x3f8)
  [<c003b738>] (process_one_work) from [<c003ba48>] (worker_thread+0x38/0x55c)
  [<c003ba48>] (worker_thread) from [<c0040f14>] (kthread+0xdc/0xf4)
  [<c0040f14>] (kthread) from [<c000f778>] (ret_from_fork+0x14/0x3c)

Fix it by marking workqueues created via create*_workqueue() with
__WQ_LEGACY and disabling flush dependency checks on them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Thierry Reding <thierry.reding@gmail.com>
Link: http://lkml.kernel.org/g/20160126173843.GA11115@ulmo.nvidia.com
Fixes: fca839c00a ("workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue")
2016-01-29 13:31:10 -05:00
wanghaibin 6201171e3b workqueue: simplify the apply_workqueue_attrs_locked()
If the apply_wqattrs_prepare() returns NULL, it has already cleaned up
the related resources, so it can return directly and avoid calling the
clean up function again.

This doesn't introduce any functional changes.

Signed-off-by: wanghaibin <wanghaibin.wang@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-07 11:04:34 -05:00
Tejun Heo 82607adcf9 workqueue: implement lockup detector
Workqueue stalls can happen from a variety of usage bugs such as
missing WQ_MEM_RECLAIM flag or concurrency managed work item
indefinitely staying RUNNING.  These stalls can be extremely difficult
to hunt down because the usual warning mechanisms can't detect
workqueue stalls and the internal state is pretty opaque.

To alleviate the situation, this patch implements workqueue lockup
detector.  It periodically monitors all worker_pools periodically and,
if any pool failed to make forward progress longer than the threshold
duration, triggers warning and dumps workqueue state as follows.

 BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 31s!
 Showing busy workqueues and worker pools:
 workqueue events: flags=0x0
   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=17/256
     pending: monkey_wrench_fn, e1000_watchdog, cache_reap, vmstat_shepherd, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, cgroup_release_agent
 workqueue events_power_efficient: flags=0x80
   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
     pending: check_lifetime, neigh_periodic_work
 workqueue cgroup_pidlist_destroy: flags=0x0
   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1
     pending: cgroup_pidlist_destroy_work_fn
 ...

The detection mechanism is controller through kernel parameter
workqueue.watchdog_thresh and can be updated at runtime through the
sysfs module parameter file.

v2: Decoupled from softlockup control knobs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
2015-12-08 11:29:47 -05:00
Tejun Heo fca839c00a workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue
Task or work item involved in memory reclaim trying to flush a
non-WQ_MEM_RECLAIM workqueue or one of its work items can lead to
deadlock.  Trigger WARN_ONCE() if such conditions are detected.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
2015-12-08 11:29:36 -05:00
Linus Torvalds e25ac7ddaa Merge branch 'for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue update from Tejun Heo:
 "This pull request contains one patch to make an unbound worker pool
  allocated from the NUMA node containing it if such node exists.  As
  unbound worker pools are node-affine by default, this makes most pools
  allocated on the right node"

* 'for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Allocate the unbound pool using local node memory
2015-11-05 14:16:27 -08:00
Xunlei Pang e2273584d3 workqueue: Allocate the unbound pool using local node memory
Currently, get_unbound_pool() uses kzalloc() to allocate the
worker pool. Actually, we can use the right node to do the
allocation, achieving local memory access.

This patch selects target node first, and uses kzalloc_node()
instead.

Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-12 12:17:31 -04:00
Shaohua Li 874bbfe600 workqueue: make sure delayed work run in local cpu
My system keeps crashing with below message. vmstat_update() schedules a delayed
work in current cpu and expects the work runs in the cpu.
schedule_delayed_work() is expected to make delayed work run in local cpu. The
problem is timer can be migrated with NO_HZ. __queue_work() queues work in
timer handler, which could run in a different cpu other than where the delayed
work is scheduled. The end result is the delayed work runs in different cpu.
The patch makes __queue_delayed_work records local cpu earlier. Where the timer
runs doesn't change where the work runs with the change.

[   28.010131] ------------[ cut here ]------------
[   28.010609] kernel BUG at ../mm/vmstat.c:1392!
[   28.011099] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN
[   28.011860] Modules linked in:
[   28.012245] CPU: 0 PID: 289 Comm: kworker/0:3 Tainted: G        W4.3.0-rc3+ #634
[   28.013065] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014
[   28.014160] Workqueue: events vmstat_update
[   28.014571] task: ffff880117682580 ti: ffff8800ba428000 task.ti: ffff8800ba428000
[   28.015445] RIP: 0010:[<ffffffff8115f921>]  [<ffffffff8115f921>]vmstat_update+0x31/0x80
[   28.016282] RSP: 0018:ffff8800ba42fd80  EFLAGS: 00010297
[   28.016812] RAX: 0000000000000000 RBX: ffff88011a858dc0 RCX:0000000000000000
[   28.017585] RDX: ffff880117682580 RSI: ffffffff81f14d8c RDI:ffffffff81f4df8d
[   28.018366] RBP: ffff8800ba42fd90 R08: 0000000000000001 R09:0000000000000000
[   28.019169] R10: 0000000000000000 R11: 0000000000000121 R12:ffff8800baa9f640
[   28.019947] R13: ffff88011a81e340 R14: ffff88011a823700 R15:0000000000000000
[   28.020071] FS:  0000000000000000(0000) GS:ffff88011a800000(0000)knlGS:0000000000000000
[   28.020071] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   28.020071] CR2: 00007ff6144b01d0 CR3: 00000000b8e93000 CR4:00000000000006f0
[   28.020071] Stack:
[   28.020071]  ffff88011a858dc0 ffff8800baa9f640 ffff8800ba42fe00ffffffff8106bd88
[   28.020071]  ffffffff8106bd0b 0000000000000096 0000000000000000ffffffff82f9b1e8
[   28.020071]  ffffffff829f0b10 0000000000000000 ffffffff81f18460ffff88011a81e340
[   28.020071] Call Trace:
[   28.020071]  [<ffffffff8106bd88>] process_one_work+0x1c8/0x540
[   28.020071]  [<ffffffff8106bd0b>] ? process_one_work+0x14b/0x540
[   28.020071]  [<ffffffff8106c214>] worker_thread+0x114/0x460
[   28.020071]  [<ffffffff8106c100>] ? process_one_work+0x540/0x540
[   28.020071]  [<ffffffff81071bf8>] kthread+0xf8/0x110
[   28.020071]  [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200
[   28.020071]  [<ffffffff81a6522f>] ret_from_fork+0x3f/0x70
[   28.020071]  [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v2.6.31+
2015-09-30 13:06:46 -04:00
Linus Torvalds 7d3e2eb178 Merge branch 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
 "Only three trivial changes for workqueue this time - doc, MAINTAINERS
  and EXPORT_SYMBOL updates"

* 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix some docbook warnings
  workqueue: Make flush_workqueue() available again to non GPL modules
  workqueue: add myself as a dedicated reviwer
2015-09-02 08:02:20 -07:00
Linus Torvalds a1d8561172 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The biggest change in this cycle is the rewrite of the main SMP load
  balancing metric: the CPU load/utilization.  The main goal was to make
  the metric more precise and more representative - see the changelog of
  this commit for the gory details:

    9d89c257df ("sched/fair: Rewrite runnable load and utilization average tracking")

  It is done in a way that significantly reduces complexity of the code:

    5 files changed, 249 insertions(+), 494 deletions(-)

  and the performance testing results are encouraging.  Nevertheless we
  need to keep an eye on potential regressions, since this potentially
  affects every SMP workload in existence.

  This work comes from Yuyang Du.

  Other changes:

   - SCHED_DL updates.  (Andrea Parri)

   - Simplify architecture callbacks by removing finish_arch_switch().
     (Peter Zijlstra et al)

   - cputime accounting: guarantee stime + utime == rtime.  (Peter
     Zijlstra)

   - optimize idle CPU wakeups some more - inspired by Facebook server
     loads.  (Mike Galbraith)

   - stop_machine fixes and updates.  (Oleg Nesterov)

   - Introduce the 'trace_sched_waking' tracepoint.  (Peter Zijlstra)

   - sched/numa tweaks.  (Srikar Dronamraju)

   - misc fixes and small cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  sched/deadline: Fix comment in enqueue_task_dl()
  sched/deadline: Fix comment in push_dl_tasks()
  sched: Change the sched_class::set_cpus_allowed() calling context
  sched: Make sched_class::set_cpus_allowed() unconditional
  sched: Fix a race between __kthread_bind() and sched_setaffinity()
  sched: Ensure a task has a non-normalized vruntime when returning back to CFS
  sched/numa: Fix NUMA_DIRECT topology identification
  tile: Reorganize _switch_to()
  sched, sparc32: Update scheduler comments in copy_thread()
  sched: Remove finish_arch_switch()
  sched, tile: Remove finish_arch_switch
  sched, sh: Fold finish_arch_switch() into switch_to()
  sched, score: Remove finish_arch_switch()
  sched, avr32: Remove finish_arch_switch()
  sched, MIPS: Get rid of finish_arch_switch()
  sched, arm: Remove finish_arch_switch()
  sched/fair: Clean up load average references
  sched/fair: Provide runnable_load_avg back to cfs_rq
  sched/fair: Remove task and group entity load when they are dead
  sched/fair: Init cfs_rq's sched_entity load average
  ...
2015-08-31 20:26:22 -07:00
Peter Zijlstra 25834c73f9 sched: Fix a race between __kthread_bind() and sched_setaffinity()
Because sched_setscheduler() checks p->flags & PF_NO_SETAFFINITY
without locks, a caller might observe an old value and race with the
set_cpus_allowed_ptr() call from __kthread_bind() and effectively undo
it:

	__kthread_bind()
	  do_set_cpus_allowed()
						<SYSCALL>
						  sched_setaffinity()
						    if (p->flags & PF_NO_SETAFFINITIY)
						    set_cpus_allowed_ptr()
	  p->flags |= PF_NO_SETAFFINITY

Fix the bug by putting everything under the regular scheduler locks.

This also closes a hole in the serialization of task_struct::{nr_,}cpus_allowed.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dedekind1@gmail.com
Cc: juri.lelli@arm.com
Cc: mgorman@suse.de
Cc: riel@redhat.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20150515154833.545640346@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-12 12:06:09 +02:00
Tim Gardner 1dadafa86a workqueue: Make flush_workqueue() available again to non GPL modules
Commit 37b1ef31a5 ("workqueue: move
flush_scheduled_work() to workqueue.h") moved the exported non GPL
flush_scheduled_work() from a function to an inline wrapper.
Unfortunately, it directly calls flush_workqueue() which is a GPL function.
This has the effect of changing the licensing requirement for this function
and makes it unavailable to non GPL modules.

See commit ad7b1f841f ("workqueue: Make
schedule_work() available again to non GPL modules") for precedent.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-08-04 14:04:54 -04:00
Paul E. McKenney f78f5b90c4 rcu: Rename rcu_lockdep_assert() to RCU_LOCKDEP_WARN()
This commit renames rcu_lockdep_assert() to RCU_LOCKDEP_WARN() for
consistency with the WARN() series of macros.  This also requires
inverting the sense of the conditional, which this commit also does.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
2015-07-22 15:27:32 -07:00
Linus Torvalds 02201e3f1b Minor merge needed, due to function move.
Main excitement here is Peter Zijlstra's lockless rbtree optimization to
 speed module address lookup.  He found some abusers of the module lock
 doing that too.
 
 A little bit of parameter work here too; including Dan Streetman's breaking
 up the big param mutex so writing a parameter can load another module (yeah,
 really).  Unfortunately that broke the usual suspects, !CONFIG_MODULES and
 !CONFIG_SYSFS, so those fixes were appended too.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVkgKHAAoJENkgDmzRrbjxQpwQAJVmBN6jF3SnwbQXv9vRixjH
 58V33sb1G1RW+kXxQ3/e8jLX/4VaN479CufruXQp+IJWXsN/CH0lbC3k8m7u50d7
 b1Zeqd/Yrh79rkc11b0X1698uGCSMlzz+V54Z0QOTEEX+nSu2ZZvccFS4UaHkn3z
 rqDo00lb7rxQz8U25qro2OZrG6D3ub2q20TkWUB8EO4AOHkPn8KWP2r429Axrr0K
 wlDWDTTt8/IsvPbuPf3T15RAhq1avkMXWn9nDXDjyWbpLfTn8NFnWmtesgY7Jl4t
 GjbXC5WYekX3w2ZDB9KaT/DAMQ1a7RbMXNSz4RX4VbzDl+yYeSLmIh2G9fZb1PbB
 PsIxrOgy4BquOWsJPm+zeFPSC3q9Cfu219L4AmxSjiZxC3dlosg5rIB892Mjoyv4
 qxmg6oiqtc4Jxv+Gl9lRFVOqyHZrTC5IJ+xgfv1EyP6kKMUKLlDZtxZAuQxpUyxR
 HZLq220RYnYSvkWauikq4M8fqFM8bdt6hLJnv7bVqllseROk9stCvjSiE3A9szH5
 OgtOfYV5GhOeb8pCZqJKlGDw+RoJ21jtNCgOr6DgkNKV9CX/kL/Puwv8gnA0B0eh
 dxCeB7f/gcLl7Cg3Z3gVVcGlgak6JWrLf5ITAJhBZ8Lv+AtL2DKmwEWS/iIMRmek
 tLdh/a9GiCitqS0bT7GE
 =tWPQ
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Main excitement here is Peter Zijlstra's lockless rbtree optimization
  to speed module address lookup.  He found some abusers of the module
  lock doing that too.

  A little bit of parameter work here too; including Dan Streetman's
  breaking up the big param mutex so writing a parameter can load
  another module (yeah, really).  Unfortunately that broke the usual
  suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
  appended too"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
  modules: only use mod->param_lock if CONFIG_MODULES
  param: fix module param locks when !CONFIG_SYSFS.
  rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
  module: add per-module param_lock
  module: make perm const
  params: suppress unused variable error, warn once just in case code changes.
  modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
  kernel/module.c: avoid ifdefs for sig_enforce declaration
  kernel/workqueue.c: remove ifdefs over wq_power_efficient
  kernel/params.c: export param_ops_bool_enable_only
  kernel/params.c: generalize bool_enable_only
  kernel/module.c: use generic module param operaters for sig_enforce
  kernel/params: constify struct kernel_param_ops uses
  sysfs: tightened sysfs permission checks
  module: Rework module_addr_{min,max}
  module: Use __module_address() for module_address_lookup()
  module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
  module: Optimize __module_address() using a latched RB-tree
  rbtree: Implement generic latch_tree
  seqlock: Introduce raw_read_seqcount_latch()
  ...
2015-07-01 10:49:25 -07:00
Shailendra Verma 402dd89d6c workqueue: fix typos in comments
tj: dropped iff -> if, iff is if and only if not a typo.  Spotted by
    Randy Dunlap.

Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
2015-05-29 09:20:01 -04:00
Luis R. Rodriguez 552f530cbc kernel/workqueue.c: remove ifdefs over wq_power_efficient
We can avoid an ifdef over wq_power_efficient's declaration
by just using IS_ENABLED().

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: cocci@systeme.lip6.fr
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28 11:32:12 +09:30
Lai Jiangshan 37b1ef31a5 workqueue: move flush_scheduled_work() to workqueue.h
flush_scheduled_work() is just a simple call to flush_work().

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-21 17:26:22 -04:00
Lai Jiangshan 899a94fe15 workqueue: remove the lock from wq_sysfs_prep_attrs()
Reading to wq->unbound_attrs requires protection of either wq_pool_mutex
or wq->mutex, and wq_sysfs_prep_attrs() is called with wq_pool_mutex held,
so we don't need to grab wq->mutex here.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-21 17:26:22 -04:00