Implement a function which queries whether it currently is running off
a workqueue rescuer. This will be used to convert writeback to
workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
There are cases where workqueue users want to expose control knobs to
userland. e.g. Unbound workqueues with custom attributes are
scheduled to be used for writeback workers and depending on
configuration it can be useful to allow admins to tinker with the
priority or allowed CPUs.
This patch implements workqueue_sysfs_register(), which makes the
workqueue visible under /sys/bus/workqueue/devices/WQ_NAME. There
currently are two attributes common to both per-cpu and unbound pools
and extra attributes for unbound pools including nice level and
cpumask.
If alloc_workqueue*() is called with WQ_SYSFS,
workqueue_sysfs_register() is called automatically as part of
workqueue creation. This is the preferred method unless the workqueue
user wants to apply workqueue_attrs before making the workqueue
visible to userland.
v2: Disallow exposing ordered workqueues as ordered workqueues can't
be tuned in any way.
Signed-off-by: Tejun Heo <tj@kernel.org>
Adjusting max_active of or applying new workqueue_attrs to an ordered
workqueue breaks its ordering guarantee. The former is obvious. The
latter is because applying attrs creates a new pwq (pool_workqueue)
and there is no ordering constraint between the old and new pwqs.
Make apply_workqueue_attrs() and workqueue_set_max_active() trigger
WARN_ON() if those operations are requested on an ordered workqueue
and fail / ignore respectively.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
We're gonna add another internal WQ flag. Let's make the distinction
clear. Prefix WQ_DRAINING with __ and move it to bit 16.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Implement apply_workqueue_attrs() which applies workqueue_attrs to the
specified unbound workqueue by creating a new pwq (pool_workqueue)
linked to worker_pool with the specified attributes.
A new pwq is linked at the head of wq->pwqs instead of tail and
__queue_work() verifies that the first unbound pwq has positive refcnt
before choosing it for the actual queueing. This is to cover the case
where creation of a new pwq races with queueing. As base ref on a pwq
won't be dropped without making another pwq the first one,
__queue_work() is guaranteed to make progress and not add work item to
a dead pwq.
init_and_link_pwq() is updated to return the last first pwq the new
pwq replaced, which is put by apply_workqueue_attrs().
Note that apply_workqueue_attrs() is almost identical to unbound pwq
part of alloc_and_link_pwqs(). The only difference is that there is
no previous first pwq. apply_workqueue_attrs() is implemented to
handle such cases and replaces unbound pwq handling in
alloc_and_link_pwqs().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Because per-cpu workqueues have multiple pwqs (pool_workqueues) to
serve the CPUs, to guarantee that a single work item isn't queued on
one pwq while still executing another, __queue_work() takes a look at
the previous pool the target work item was on and if it's still
executing there, queue the work item on that pool.
To support changing workqueue_attrs on the fly, unbound workqueues too
will have multiple pwqs and thus need non-reentrancy test when
queueing. This patch modifies __queue_work() such that the reentrancy
test is performed regardless of the workqueue type.
per_cpu_ptr(wq->cpu_pwqs, cpu) used to be used to determine the
matching pwq for the last pool. This can't be used for unbound
workqueues and is replaced with worker->current_pwq which also happens
to be simpler.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Unbound pwqs (pool_workqueues) will be dynamically created and
destroyed with the scheduled unbound workqueue w/ custom attributes
support. This patch synchronizes pwq linking and unlinking against
flush_workqueue() so that its operation isn't disturbed by pwqs coming
and going.
Linking and unlinking a pwq into wq->pwqs is now protected also by
wq->flush_mutex and a new pwq's work_color is initialized to
wq->work_color during linking. This ensures that pwqs changes don't
disturb flush_workqueue() in progress and the new pwq's work coloring
stays in sync with the rest of the workqueue.
flush_mutex during unlinking isn't strictly necessary but it's simpler
to do it anyway.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Add pool_workqueue->refcnt along with get/put_pwq(). Both per-cpu and
unbound pwqs have refcnts and any work item inserted on a pwq
increments the refcnt which is dropped when the work item finishes.
For per-cpu pwqs the base ref is never dropped and destroy_workqueue()
frees the pwqs as before. For unbound ones, destroy_workqueue()
simply drops the base ref on the first pwq. When the refcnt reaches
zero, pwq_unbound_release_workfn() is scheduled on system_wq, which
unlinks the pwq, puts the associated pool and frees the pwq and wq as
necessary. This needs to be done from a work item as put_pwq() needs
to be protected by pool->lock but release can't happen with the lock
held - e.g. put_unbound_pool() involves blocking operations.
Unbound pool->locks are marked with lockdep subclas 1 as put_pwq()
will schedule the release work item on system_wq while holding the
unbound pool's lock and triggers recursive locking warning spuriously.
This will be used to implement dynamic creation and destruction of
unbound pwqs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
* Move initialization and linking of pool_workqueues into
init_and_link_pwq().
* Make the failure path use destroy_workqueue() once pool_workqueue
initialization succeeds.
These changes are to prepare for dynamic management of pool_workqueues
and don't introduce any functional changes.
While at it, convert list_del(&wq->list) to list_del_init() as a
precaution as scheduled changes will make destruction more complex.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
WQ_RESCUER is superflous. WQ_MEM_RECLAIM indicates that the user
wants a rescuer and testing wq->rescuer for NULL can answer whether a
given workqueue has a rescuer or not. Drop WQ_RESCUER and test
wq->rescuer directly.
This will help simplifying __alloc_workqueue_key() failure path by
allowing it to use destroy_workqueue() on a partially constructed
workqueue, which in turn will help implementing dynamic management of
pool_workqueues.
While at it, clear wq->rescuer after freeing it in
destroy_workqueue(). This is a precaution as scheduled changes will
make destruction more complex.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
There are gonna be multiple unbound pools. Include pool ID in the
name of unbound kworkers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
All per-cpu pools are standard, so there's no need to use both "cpu"
and "std" and for_each_std_worker_pool() is confusing in that it can
be used only for per-cpu pools.
* s/cpu_std_worker_pools/cpu_worker_pools/
* s/for_each_std_worker_pool()/for_each_cpu_worker_pool()/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Workqueue no longer makes use of unbound_std_worker_pools[]. All
unbound worker_pools are created dynamically and there's nothing
special about the standard ones. With unbound_std_worker_pools[]
unused, workqueue no longer has places where it needs to treat the
per-cpu pools-cpu and unbound pools together.
Remove unbound_std_worker_pools[] and the helpers wrapping it to
present unified per-cpu and unbound standard worker_pools.
* for_each_std_worker_pool() now only walks through per-cpu pools.
* for_each[_online]_wq_cpu() which don't have any users left are
removed.
* std_worker_pools() and std_worker_pool_pri() are unused and removed.
* get_std_worker_pool() is removed. Its only user -
alloc_and_link_pwqs() - only used it for per-cpu pools anyway. Open
code per_cpu access in alloc_and_link_pwqs() instead.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This patch makes unbound worker_pools reference counted and
dynamically created and destroyed as workqueues needing them come and
go. All unbound worker_pools are hashed on unbound_pool_hash which is
keyed by the content of worker_pool->attrs.
When an unbound workqueue is allocated, get_unbound_pool() is called
with the attributes of the workqueue. If there already is a matching
worker_pool, the reference count is bumped and the pool is returned.
If not, a new worker_pool with matching attributes is created and
returned.
When an unbound workqueue is destroyed, put_unbound_pool() is called
which decrements the reference count of the associated worker_pool.
If the refcnt reaches zero, the worker_pool is destroyed in sched-RCU
safe way.
Note that the standard unbound worker_pools - normal and highpri ones
with no specific cpumask affinity - are no longer created explicitly
during init_workqueues(). init_workqueues() only initializes
workqueue_attrs to be used for standard unbound pools -
unbound_std_wq_attrs[]. The pools are spawned on demand as workqueues
are created.
v2: - Comment added to init_worker_pool() explaining that @pool should
be in a condition which can be passed to put_unbound_pool() even
on failure.
- pool->refcnt reaching zero and the pool being removed from
unbound_pool_hash should be dynamic. pool->refcnt is converted
to int from atomic_t and now manipulated inside workqueue_lock.
- Removed an incorrect sanity check on nr_idle in
put_unbound_pool() which may trigger spuriously.
All changes were suggested by Lai Jiangshan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Introduce struct workqueue_attrs which carries worker attributes -
currently the nice level and allowed cpumask along with helper
routines alloc_workqueue_attrs() and free_workqueue_attrs().
Each worker_pool now carries ->attrs describing the attributes of its
workers. All functions dealing with cpumask and nice level of workers
are updated to follow worker_pool->attrs instead of determining them
from other characteristics of the worker_pool, and init_workqueues()
is updated to set worker_pool->attrs appropriately for all standard
pools.
Note that create_worker() is updated to always perform set_user_nice()
and use set_cpus_allowed_ptr() combined with manual assertion of
PF_THREAD_BOUND instead of kthread_bind(). This simplifies handling
random attributes without affecting the outcome.
This patch doesn't introduce any behavior changes.
v2: Missing cpumask_var_t definition caused build failure on some
archs. linux/cpumask.h included.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This will be used to implement unbound pools with custom attributes.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
POOL_MANAGING_WORKERS is used to synchronize the manager role.
Synchronizing among workers doesn't need blocking and that's why it's
implemented as a flag.
It got converted to a mutex a while back to add blocking wait from CPU
hotplug path - 6037315269 ("workqueue: use mutex for global_cwq
manager exclusion"). Later it turned out that synchronization among
workers and cpu hotplug need to be done separately. Eventually,
POOL_MANAGING_WORKERS is restored and workqueue->manager_mutex got
morphed into workqueue->assoc_mutex - 552a37e936 ("workqueue: restore
POOL_MANAGING_WORKERS") and b2eb83d123 ("workqueue: rename
manager_mutex to assoc_mutex").
Now, we're gonna need to be able to lock out managers from
destroy_workqueue() to support multiple unbound pools with custom
attributes making it again necessary to be able to block on the
manager role. This patch replaces POOL_MANAGING_WORKERS with
worker_pool->manager_arb.
This patch doesn't introduce any behavior changes.
v2: s/manager_mutex/manager_arb/
Signed-off-by: Tejun Heo <tj@kernel.org>
Make worker_pool_idr protected by workqueue_lock for writes and
sched-RCU protected for reads. Lockdep assertions are added to
for_each_pool() and get_work_pool() and all their users are converted
to either hold workqueue_lock or disable preemption/irq.
worker_pool_assign_id() is updated to hold workqueue_lock when
allocating a pool ID. As idr_get_new() always performs RCU-safe
assignment, this is enough on the writer side.
As standard pools are never destroyed, there's nothing to do on that
side.
The locking is superflous at this point. This is to help
implementation of unbound pools/pwqs with custom attributes.
This patch doesn't introduce any behavior changes.
v2: Updated for_each_pwq() use if/else for the hidden assertion
statement instead of just if as suggested by Lai. This avoids
confusing the following else clause.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Make workqueue->pwqs protected by workqueue_lock for writes and
sched-RCU protected for reads. Lockdep assertions are added to
for_each_pwq() and first_pwq() and all their users are converted to
either hold workqueue_lock or disable preemption/irq.
alloc_and_link_pwqs() is updated to use list_add_tail_rcu() for
consistency which isn't strictly necessary as the workqueue isn't
visible. destroy_workqueue() isn't updated to sched-RCU release pwqs.
This is okay as the workqueue should have on users left by that point.
The locking is superflous at this point. This is to help
implementation of unbound pools/pwqs with custom attributes.
This patch doesn't introduce any behavior changes.
v2: Updated for_each_pwq() use if/else for the hidden assertion
statement instead of just if as suggested by Lai. This avoids
confusing the following else clause.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
get_pwq() takes @cpu, which can also be WORK_CPU_UNBOUND, and @wq and
returns the matching pwq (pool_workqueue). We want to move away from
using @cpu for identifying pools and pwqs for unbound pools with
custom attributes and there is only one user - workqueue_congested() -
which makes use of the WQ_UNBOUND conditional in get_pwq(). All other
users already know whether they're dealing with a per-cpu or unbound
workqueue.
Replace get_pwq() with explicit per_cpu_ptr(wq->cpu_pwqs, cpu) for
per-cpu workqueues and first_pwq() for unbound ones, and open-code
WQ_UNBOUND conditional in workqueue_congested().
Note that this makes workqueue_congested() behave sligntly differently
when @cpu other than WORK_CPU_UNBOUND is specified. It ignores @cpu
for unbound workqueues and always uses the first pwq instead of
oopsing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
workqueue->pool_wq union is used to point either to percpu pwqs
(pool_workqueues) or single unbound pwq. As the first pwq can be
accessed via workqueue->pwqs list, there's no reason for the single
pointer anymore.
Use list_first_entry(workqueue->pwqs) to access the unbound pwq and
drop workqueue->pool_wq.single pointer and the pool_wq union. It
simplifies the code and eases implementing multiple unbound pools w/
custom attributes.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Workqueue is mixing unsigned int and int for @cpu variables. There's
no point in using unsigned int for cpus - many of cpu related APIs
take int anyway. Consistently use int for @cpu variables so that we
can use negative values to mark special ones.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Similar to how pool_workqueue iteration used to be, raising and
servicing mayday requests is based on CPU numbers. It's hairy because
cpumask_t may not be able to handle WORK_CPU_UNBOUND and cpumasks are
assumed to be always set on UP. This is ugly and can't handle
multiple unbound pools to be added for unbound workqueues w/ custom
attributes.
Add workqueue_struct->maydays. When a pool_workqueue needs rescuing,
it gets chained on the list through pool_workqueue->mayday_node and
rescuer_thread() consumes the list until it's empty.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
The three freeze/thaw related functions - freeze_workqueues_begin(),
freeze_workqueues_busy() and thaw_workqueues() - need to iterate
through all pool_workqueues of all freezable workqueues. They did it
by first iterating pools and then visiting all pwqs (pool_workqueues)
of all workqueues and process it if its pwq->pool matches the current
pool. This is rather backwards and done this way partly because
workqueue didn't have fitting iteration helpers and partly to avoid
the number of lock operations on pool->lock.
Workqueue now has fitting iterators and the locking operation overhead
isn't anything to worry about - those locks are unlikely to be
contended and the same CPU visiting the same set of locks multiple
times isn't expensive.
Restructure the three functions such that the flow better matches the
logical steps and pwq iteration is done using for_each_pwq() inside
workqueue iteration.
* freeze_workqueues_begin(): Setting of FREEZING is moved into a
separate for_each_pool() iteration. pwq iteration for clearing
max_active is updated as described above.
* freeze_workqueues_busy(): pwq iteration updated as described above.
* thaw_workqueues(): The single for_each_wq_cpu() iteration is broken
into three discrete steps - clearing FREEZING, restoring max_active,
and kicking workers. The first and last steps use for_each_pool()
and the second step uses pwq iteration described above.
This makes the code easier to understand and removes the use of
for_each_wq_cpu() for walking pwqs, which can't support multiple
unbound pwqs which will be needed to implement unbound workqueues with
custom attributes.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
With the scheduled unbound pools with custom attributes, there will be
multiple unbound pools, so it wouldn't be able to use
for_each_wq_cpu() + for_each_std_worker_pool() to iterate through all
pools.
Introduce for_each_pool() which iterates through all pools using
worker_pool_idr and use it instead of for_each_wq_cpu() +
for_each_std_worker_pool() combination in freeze_workqueues_begin().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Introduce for_each_pwq() which iterates all pool_workqueues of a
workqueue using the recently added workqueue->pwqs list and replace
for_each_pwq_cpu() usages with it.
This is primarily to remove the single unbound CPU assumption from pwq
iteration for the scheduled unbound pools with custom attributes
support which would introduce multiple unbound pwqs per workqueue;
however, it also simplifies iterator users.
Note that pwq->pool initialization is moved to alloc_and_link_pwqs()
as that now is the only place which is explicitly handling the two pwq
types.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Add workqueue_struct->pwqs list and chain all pool_workqueues
belonging to a workqueue there. This will be used to implement
generic pool_workqueue iteration and handle multiple pool_workqueues
for the scheduled unbound pools with custom attributes.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
pool_workqueues need to be aligned to 1 << WORK_STRUCT_FLAG_BITS as
the lower bits of work->data are used for flags when they're pointing
to pool_workqueues.
Due to historical reasons, unbound pool_workqueues are allocated using
kzalloc() with sufficient buffer area for alignment and aligned
manually. The original pointer is stored at the end which free_pwqs()
retrieves when freeing it.
There's no reason for this hackery anymore. Set alignment of struct
pool_workqueue to 1 << WORK_STRUCT_FLAG_BITS, add kmem_cache for
pool_workqueues with proper alignment and replace the hacky alloc and
free implementation with plain kmem_cache_zalloc/free().
In case WORK_STRUCT_FLAG_BITS gets shrunk too much and makes fields of
pool_workqueues misaligned, trigger WARN if the alignment of struct
pool_workqueue becomes smaller than that of long long.
Note that assertion on IS_ALIGNED() is removed from alloc_pwqs(). We
already have another one in pwq init loop in __alloc_workqueue_key().
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
workqueue_lock will be used to synchronize areas which require
irq-safety and there isn't much benefit in keeping it not irq-safe.
Make it irq-safe.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Workqueue has been using mostly BUG_ON()s for sanity checks, which
fail unnecessarily harshly when the assertion doesn't hold. Most
assertions can converted to be less drastic such that things can limp
along instead of dying completely. Convert BUG_ON()s to
WARN_ON[_ONCE]()s with softer failure behaviors - e.g. if assertion
check fails in destroy_worker(), trigger WARN and silently ignore
destruction request.
Most conversions are trivial. Note that sanity checks in
destroy_workqueue() are moved above removal from workqueues list so
that it can bail out without side-effects if assertion checks fail.
This patch doesn't introduce any visible behavior changes during
normal operation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Since multiple pools per cpu have been introduced, wq_unbind_fn() has
a subtle bug which may theoretically stall work item processing. The
problem is two-fold.
* wq_unbind_fn() depends on the worker executing wq_unbind_fn() itself
to start unbound chain execution, which works fine when there was
only single pool. With multiple pools, only the pool which is
running wq_unbind_fn() - the highpri one - is guaranteed to have
such kick-off. The other pool could stall when its busy workers
block.
* The current code is setting WORKER_UNBIND / POOL_DISASSOCIATED of
the two pools in succession without initiating work execution
inbetween. Because setting the flags requires grabbing assoc_mutex
which is held while new workers are created, this could lead to
stalls if a pool's manager is waiting for the previous pool's work
items to release memory. This is almost purely theoretical tho.
Update wq_unbind_fn() such that it sets WORKER_UNBIND /
POOL_DISASSOCIATED, goes over schedule() and explicitly kicks off
execution for a pool and then moves on to the next one.
tj: Updated comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Rescuers visit different worker_pools to process work items from pools
under pressure. Currently, rescuer->pool is updated outside any
locking and when an outsider looks at a rescuer, there's no way to
tell when and whether rescuer->pool is gonna change. While this
doesn't currently cause any problem, it is nasty.
With recent worker_maybe_bind_and_lock() changes, we can move
rescuer->pool updates inside pool locks such that if rescuer->pool
equals a locked pool, it's guaranteed to stay that way until the pool
is unlocked.
Move rescuer->pool inside pool->lock.
This patch doesn't introduce any visible behavior difference.
tj: Updated the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_maybe_bind_and_lock() currently takes @worker but only cares
about @worker->pool. This patch updates worker_maybe_bind_and_lock()
to take @pool instead of @worker. This will be used to better define
synchronization rules regarding rescuer->pool updates.
This doesn't introduce any functional change.
tj: Updated the comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_maybe_bind_and_lock() uses both @worker->task and @current at
the same time. As worker_maybe_bind_and_lock() can only be called by
the current worker task, they are always the same.
Update worker_maybe_bind_and_lock() to use %current consistently.
This doesn't introduce any functional change.
tj: Massaged the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit d8e794dfd5 ("workqueue: set
delayed_work->timer function on initialization") exports function
delayed_work_timer_fn() only for GPL modules. This makes delayed-works
unusable for non-GPL modules, because initialization macro now requires
GPL symbol. For example schedule_delayed_work() available for non-GPL.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # 3.7
workqueue has moved away from global_cwqs to worker_pools and with the
scheduled custom worker pools, wforkqueues will be associated with
pools which don't have anything to do with CPUs. The workqueue code
went through significant amount of changes recently and mass renaming
isn't likely to hurt much additionally. Let's replace 'cpu' with
'pool' so that it reflects the current design.
* s/struct cpu_workqueue_struct/struct pool_workqueue/
* s/cpu_wq/pool_wq/
* s/cwq/pwq/
This patch is purely cosmetic.
Signed-off-by: Tejun Heo <tj@kernel.org>
is_chained_work() was added before current_wq_worker() and implemented
its own ham-fisted way of finding out whether %current is a workqueue
worker - it iterates through all possible workers.
Drop the custom implementation and reimplement using
current_wq_worker().
Signed-off-by: Tejun Heo <tj@kernel.org>
c9e7cf273f ("workqueue: move busy_hash from global_cwq to
worker_pool") incorrectly converted is_chained_work() to use
get_gcwq() inside for_each_gcwq_cpu() while removing get_gcwq().
As cwq might not exist for all possible workqueue CPUs, @cwq can be
NULL and the following cwq deferences can lead to oops.
Fix it by using for_each_cwq_cpu() instead, which is the better one to
use anyway as we only need to check pools that the wq is associated
with.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, __queue_work() chooses the pool to queue a work item to and
then determines cwq from the target wq and the chosen pool. This is a
bit backwards in that we can determine cwq first and simply use
cwq->pool. This way, we can skip get_std_worker_pool() in queueing
path which will be a hurdle when implementing custom worker pools.
Update __queue_work() such that it chooses the target cwq and then use
cwq->pool instead of the other way around. While at it, add missing
{} in an if statement.
This patch doesn't introduce any functional changes.
tj: The original patch had two get_cwq() calls - the first to
determine the pool by doing get_cwq(cpu, wq)->pool and the second
to determine the matching cwq from get_cwq(pool->cpu, wq).
Updated the function such that it chooses cwq instead of pool and
removed the second call. Rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
get_work_pool_id() currently first obtains pool using get_work_pool()
and then return pool->id. For an off-queue work item, this involves
obtaining pool ID from worker->data, performing idr_find() to find the
matching pool and then returning its pool->id which of course is the
same as the one which went into idr_find().
Just open code WORK_STRUCT_CWQ case and directly return pool ID from
work->data.
tj: The original patch dropped on-queue work item handling and renamed
the function to offq_work_pool_id(). There isn't much benefit in
doing so. Handling it only requires a single if() and we need at
least BUG_ON(), which is also a branch, even if we drop on-queue
handling. Open code WORK_STRUCT_CWQ case and keep the function in
line with get_work_pool(). Rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
As nr_running is likely to be accessed from other CPUs during
try_to_wake_up(), it was kept outside worker_pool; however, while less
frequent, other fields in worker_pool are accessed from other CPUs
for, e.g., non-reentrancy check. Also, with recent pool related
changes, accessing nr_running matching the worker_pool isn't as simple
as it used to be.
Move nr_running inside worker_pool. Keep it aligned to cacheline and
define CPU pools using DEFINE_PER_CPU_SHARED_ALIGNED(). This should
give at least the same cacheline behavior.
get_pool_nr_running() is replaced with direct pool->nr_running
accesses.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
With the recent is-work-queued-here test simplification, the nested
if() in try_to_grab_pending() can be collapsed. Collapse it.
This patch is purely cosmetic.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, determining whether a work item is queued on a locked pool
involves somewhat convoluted memory barrier dancing. It goes like the
following.
* When a work item is queued on a pool, work->data is updated before
work->entry is linked to the pending list with a wmb() inbetween.
* When trying to determine whether a work item is currently queued on
a pool pointed to by work->data, it locks the pool and looks at
work->entry. If work->entry is linked, we then do rmb() and then
check whether work->data points to the current pool.
This works because, work->data can only point to a pool if it
currently is or were on the pool and,
* If it currently is on the pool, the tests would obviously succeed.
* It it left the pool, its work->entry was cleared under pool->lock,
so if we're seeing non-empty work->entry, it has to be from the work
item being linked on another pool. Because work->data is updated
before work->entry is linked with wmb() inbetween, work->data update
from another pool is guaranteed to be visible if we do rmb() after
seeing non-empty work->entry. So, we either see empty work->entry
or we see updated work->data pointin to another pool.
While this works, it's convoluted, to put it mildly. With recent
updates, it's now guaranteed that work->data points to cwq only while
the work item is queued and that updating work->data to point to cwq
or back to pool is done under pool->lock, so we can simply test
whether work->data points to cwq which is associated with the
currently locked pool instead of the convoluted memory barrier
dancing.
This patch replaces the memory barrier based "are you still here,
really?" test with much simpler "does work->data points to me?" test -
if work->data points to a cwq which is associated with the currently
locked pool, the work item is guaranteed to be queued on the pool as
work->data can start and stop pointing to such cwq only under
pool->lock and the start and stop coincide with queue and dequeue.
tj: Rewrote the comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We plan to use work->data pointing to cwq as the synchronization
invariant when determining whether a given work item is on a locked
pool or not, which requires work->data pointing to cwq only while the
work item is queued on the associated pool.
With delayed_work updated not to overload work->data for target
workqueue recording, the only case where we still have off-queue
work->data pointing to cwq is try_to_grab_pending() which doesn't
update work->data after stealing a queued work item. There's no
reason for try_to_grab_pending() to not update work->data to point to
the pool instead of cwq, like the normal execution does.
This patch adds set_work_pool_and_keep_pending() which makes
work->data point to pool instead of cwq but keeps the pending bit
unlike set_work_pool_and_clear_pending() (surprise!).
After this patch, it's guaranteed that only queued work items point to
cwqs.
This patch doesn't introduce any visible behavior change.
tj: Renamed the new helper function to match
set_work_pool_and_clear_pending() and rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
To avoid executing the same work item from multiple CPUs concurrently,
a work_struct records the last pool it was on in its ->data so that,
on the next queueing, the pool can be queried to determine whether the
work item is still executing or not.
A delayed_work goes through timer before actually being queued on the
target workqueue and the timer needs to know the target workqueue and
CPU. This is currently achieved by modifying delayed_work->work.data
such that it points to the cwq which points to the target workqueue
and the last CPU the work item was on. __queue_delayed_work()
extracts the last CPU from delayed_work->work.data and then combines
it with the target workqueue to create new work.data.
The only thing this rather ugly hack achieves is encoding the target
workqueue into delayed_work->work.data without using a separate field,
which could be a trade off one can make; unfortunately, this entangles
work->data management between regular workqueue and delayed_work code
by setting cwq pointer before the work item is actually queued and
becomes a hindrance for further improvements of work->data handling.
This can be easily made sane by adding a target workqueue field to
delayed_work. While delayed_work is used widely in the kernel and
this does make it a bit larger (<5%), I think this is the right
trade-off especially given the prospect of much saner handling of
work->data which currently involves quite tricky memory barrier
dancing, and don't expect to see any measureable effect.
Add delayed_work->wq and drop the delayed_work->work.data overloading.
tj: Rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, work_busy() first tests whether the work has a pool
associated with it and if not, considers it idle. This works fine
even for delayed_work.work queued on timer, as __queue_delayed_work()
sets cwq on delayed_work.work - a queued delayed_work always has its
cwq and thus pool associated with it.
However, we're about to update delayed_work queueing and this won't
hold. Update work_busy() such that it tests WORK_STRUCT_PENDING
before the associated pool. This doesn't make any noticeable behavior
difference now.
With work_pending() test moved, the function read a lot better with
"if (!pool)" test flipped to positive. Flip it.
While at it, lose the comment about now non-existent reentrant
workqueues.
tj: Reorganized the function and rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that workqueue has moved away from gcwqs, workqueue no longer has
the need to have a CPU identifier indicating "no cpu associated" - we
now use WORK_OFFQ_POOL_NONE instead - and most uses of WORK_CPU_NONE
are gone.
The only left usage is as the end marker for for_each_*wq*()
iterators, where the name WORK_CPU_NONE is confusing w/o actual
WORK_CPU_NONE usages. Similarly, WORK_CPU_LAST which equals
WORK_CPU_NONE no longer makes sense.
Replace both WORK_CPU_NONE and LAST with WORK_CPU_END. This patch
doesn't introduce any functional difference.
tj: s/WORK_CPU_LAST/WORK_CPU_END/ and rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Remove remaining references to gcwq.
* __next_gcwq_cpu() steals __next_wq_cpu() name. The original
__next_wq_cpu() became __next_cwq_cpu().
* s/for_each_gcwq_cpu/for_each_wq_cpu/
s/for_each_online_gcwq_cpu/for_each_online_wq_cpu/
* s/gcwq_mayday_timeout/pool_mayday_timeout/
* s/gcwq_unbind_fn/wq_unbind_fn/
* Drop references to gcwq in comments.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Rename per-cpu and unbound nr_running variables such that they match
the pool variables.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
global_cwq is now nothing but a container for per-cpu standard
worker_pools. Declare the worker pools directly as
cpu/unbound_std_worker_pools[] and remove global_cwq.
* ____cacheline_aligned_in_smp moved from global_cwq to worker_pool.
This probably would have made sense even before this change as we
want each pool to be aligned.
* get_gcwq() is replaced with std_worker_pools() which returns the
pointer to the standard pool array for a given CPU.
* __alloc_workqueue_key() updated to use get_std_worker_pool() instead
of open-coding pool determination.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
v2: Joonsoo pointed out that it'd better to align struct worker_pool
rather than the array so that every pool is aligned.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Joonsoo Kim <js1304@gmail.com>
The only remaining user of pool->gcwq is std_worker_pool_pri().
Reimplement it using get_gcwq() and remove worker_pool->gcwq.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
for_each_std_worker_pool() takes @cpu instead of @gcwq.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Instead of holding locks from both pools and then processing the pools
together, make freezing/thwaing per-pool - grab locks of one pool,
process it, release it and then proceed to the next pool.
While this patch changes processing order across pools, order within
each pool remains the same. As each pool is independent, this
shouldn't break anything.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Instead of holding locks from both pools and then processing the pools
together, make hotplug processing per-pool - grab locks of one pool,
process it, release it and then proceed to the next pool.
rebind_workers() is updated to take and process @pool instead of @gcwq
which results in a lot of de-indentation. gcwq_claim_assoc_and_lock()
and its counterpart are replaced with in-line per-pool locking.
While this patch changes processing order across pools, order within
each pool remains the same. As each pool is independent, this
shouldn't break anything.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Move gcwq->lock to pool->lock. The conversion is mostly
straight-forward. Things worth noting are
* In many places, this removes the need to use gcwq completely. pool
is used directly instead. get_std_worker_pool() is added to help
some of these conversions. This also leaves get_work_gcwq() without
any user. Removed.
* In hotplug and freezer paths, the pools belonging to a CPU are often
processed together. This patch makes those paths hold locks of all
pools, with highpri lock nested inside, to keep the conversion
straight-forward. These nested lockings will be removed by
following patches.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Move gcwq->cpu to pool->cpu. This introduces a couple places where
gcwq->pools[0].cpu is used. These will soon go away as gcwq is
further reduced.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
There's no functional necessity for the two pools on the same CPU to
share the busy hash table. It's also likely to be a bottleneck when
implementing pools with user-specified attributes.
This patch makes busy_hash per-pool. The conversion is mostly
straight-forward. Changes worth noting are,
* Large block of changes in rebind_workers() is moving the block
inside for_each_worker_pool() as now there are separate hash tables
for each pool. This changes the order of operations but doesn't
break anything.
* Thre for_each_worker_pool() loops in gcwq_unbind_fn() are combined
into one. This again changes the order of operaitons but doesn't
break anything.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, when a work item is off-queue, work->data records the CPU
it was last on, which is used to locate the last executing instance
for non-reentrance, flushing, etc.
We're in the process of removing global_cwq and making worker_pool the
top level abstraction. This patch makes work->data point to the pool
it was last associated with instead of CPU.
After the previous WORK_OFFQ_POOL_CPU and worker_poo->id additions,
the conversion is fairly straight-forward. WORK_OFFQ constants and
functions are modified to record and read back pool ID instead.
worker_pool_by_id() is added to allow looking up pool from ID.
get_work_pool() replaces get_work_gcwq(), which is reimplemented using
get_work_pool(). get_work_pool_id() replaces work_cpu().
This patch shouldn't introduce any observable behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Add worker_pool->id which is allocated from worker_pool_idr. This
will be used to record the last associated worker_pool in work->data.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, when a work item is off queue, high bits of its data
encodes the last CPU it was on. This is scheduled to be changed to
pool ID, which will make it impossible to use WORK_CPU_NONE to
indicate no association.
This patch limits the number of bits which are used for off-queue cpu
number to 31 (so that the max fits in an int) and uses the highest
possible value - WORK_OFFQ_CPU_NONE - to indicate no association.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Make GCWQ_FREEZING a pool flag POOL_FREEZING. This patch doesn't
change locking - FREEZING on both pools of a CPU are set or clear
together while holding gcwq->lock. It shouldn't cause any functional
difference.
This leaves gcwq->flags w/o any flags. Removed.
While at it, convert BUG_ON()s in freeze_workqueue_begin() and
thaw_workqueues() to WARN_ON_ONCE().
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Make GCWQ_DISASSOCIATED a pool flag POOL_DISASSOCIATED. This patch
doesn't change locking - DISASSOCIATED on both pools of a CPU are set
or clear together while holding gcwq->lock. It shouldn't cause any
functional difference.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
There are currently two worker pools per cpu (including the unbound
cpu) and they are the only pools in use. New class of pools are
scheduled to be added and some pool related APIs will be added
inbetween. Call the existing pools the standard pools and prefix them
with std_. Do this early so that new APIs can use std_ prefix from
the beginning.
This patch doesn't introduce any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This function no longer has any external users. Unexport it. It will
be removed later on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This will be used to implement an inline function to query whether
%current is a workqueue worker and, if so, allow determining which
work item it's executing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Workqueue wants to expose more interface internal to kernel/. Instead
of adding a new header file, repurpose kernel/workqueue_sched.h.
Rename it to workqueue_internal.h and add include protector.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
PF_WQ_WORKER is used to tell scheduler that the task is a workqueue
worker and needs wq_worker_sleeping/waking_up() invoked on it for
concurrency management. As rescuers never participate in concurrency
management, PF_WQ_WORKER wasn't set on them.
There's a need for an interface which can query whether %current is
executing a work item and if so which. Such interface requires a way
to identify all tasks which may execute work items and PF_WQ_WORKER
will be used for that. As all normal workers always have PF_WQ_WORKER
set, we only need to add it to rescuers.
As rescuers start with WORKER_PREP but never clear it, it's always
NOT_RUNNING and there's no need to worry about it interfering with
concurrency management even if PF_WQ_WORKER is set; however, unlike
normal workers, rescuers currently don't have its worker struct as
kthread_data(). It uses the associated workqueue_struct instead.
This is problematic as wq_worker_sleeping/waking_up() expect struct
worker at kthread_data().
This patch adds worker->rescue_wq and start rescuer kthreads with
worker struct as kthread_data and sets PF_WQ_WORKER on rescuers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
42f8570f43 ("workqueue: use new hashtable implementation") incorrectly
made busy workers hashed by the pointer value of worker instead of
work. This broke find_worker_executing_work() which in turn broke a
lot of fundamental operations of workqueue - non-reentrancy and
flushing among others. The flush malfunction triggered warning in
disk event code in Fengguang's automated test.
write_dev_root_ (3265) used greatest stack depth: 2704 bytes left
------------[ cut here ]------------
WARNING: at /c/kernel-tests/src/stable/block/genhd.c:1574 disk_clear_events+0x\
cf/0x108()
Hardware name: Bochs
Modules linked in:
Pid: 3328, comm: ata_id Not tainted 3.7.0-01930-gbff6343 #1167
Call Trace:
[<ffffffff810997c4>] warn_slowpath_common+0x83/0x9c
[<ffffffff810997f7>] warn_slowpath_null+0x1a/0x1c
[<ffffffff816aea77>] disk_clear_events+0xcf/0x108
[<ffffffff811bd8be>] check_disk_change+0x27/0x59
[<ffffffff822e48e2>] cdrom_open+0x49/0x68b
[<ffffffff81ab0291>] idecd_open+0x88/0xb7
[<ffffffff811be58f>] __blkdev_get+0x102/0x3ec
[<ffffffff811bea08>] blkdev_get+0x18f/0x30f
[<ffffffff811bebfd>] blkdev_open+0x75/0x80
[<ffffffff8118f510>] do_dentry_open+0x1ea/0x295
[<ffffffff8118f5f0>] finish_open+0x35/0x41
[<ffffffff8119c720>] do_last+0x878/0xa25
[<ffffffff8119c993>] path_openat+0xc6/0x333
[<ffffffff8119cf37>] do_filp_open+0x38/0x86
[<ffffffff81190170>] do_sys_open+0x6c/0xf9
[<ffffffff8119021e>] sys_open+0x21/0x23
[<ffffffff82c1c3d9>] system_call_fastpath+0x16/0x1b
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
To avoid executing the same work item concurrenlty, workqueue hashes
currently busy workers according to their current work items and looks
up the the table when it wants to execute a new work item. If there
already is a worker which is executing the new work item, the new item
is queued to the found worker so that it gets executed only after the
current execution finishes.
Unfortunately, a work item may be freed while being executed and thus
recycled for different purposes. If it gets recycled for a different
work item and queued while the previous execution is still in
progress, workqueue may make the new work item wait for the old one
although the two aren't really related in any way.
In extreme cases, this false dependency may lead to deadlock although
it's extremely unlikely given that there aren't too many self-freeing
work item users and they usually don't wait for other work items.
To alleviate the problem, record the current work function in each
busy worker and match it together with the work item address in
find_worker_executing_work(). While this isn't complete, it ensures
that unrelated work items don't interact with each other and in the
very unlikely case where a twisted wq user triggers it, it's always
onto itself making the culprit easy to spot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrey Isakov <andy51@gmx.ru>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51701
Cc: stable@vger.kernel.org
Switch workqueues to use the new hashtable implementation. This reduces the
amount of generic unrelated code in the workqueues.
This patch depends on d9b482c ("hashtable: introduce a small and naive
hashtable") which was merged in v3.6.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull workqueue changes from Tejun Heo:
"Nothing exciting. Just two trivial changes."
* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: add WARN_ON_ONCE() on CPU number to wq_worker_waking_up()
workqueue: trivial fix for return statement in work_busy()
8852aac25e ("workqueue: mod_delayed_work_on() shouldn't queue timer on
0 delay") unexpectedly uncovered a very nasty abuse of delayed_work in
megaraid - it allocated work_struct, casted it to delayed_work and
then pass that into queue_delayed_work().
Previously, this was okay because 0 @delay short-circuited to
queue_work() before doing anything with delayed_work. 8852aac25e
moved 0 @delay test into __queue_delayed_work() after sanity check on
delayed_work making megaraid trigger BUG_ON().
Although megaraid is already fixed by c1d390d8e6 ("megaraid: fix
BUG_ON() from incorrect use of delayed work"), this patch converts
BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s so that such
abusers, if there are more, trigger warning but don't crash the
machine.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Xiaotian Feng <xtfeng@gmail.com>
Recently, workqueue code has gone through some changes and we found
some bugs related to concurrency management operations happening on
the wrong CPU. When a worker is concurrency managed
(!WORKER_NOT_RUNNIG), it should be bound to its associated cpu and
woken up to that cpu. Add WARN_ON_ONCE() to verify this.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Return type of work_busy() is unsigned int.
There is return statement returning boolean value, 'false' in work_busy().
It is not problem, because 'false' may be treated '0'.
However, fixing it would make code robust.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
8376fe22c7 ("workqueue: implement mod_delayed_work[_on]()")
implemented mod_delayed_work[_on]() using the improved
try_to_grab_pending(). The function is later used, among others, to
replace [__]candel_delayed_work() + queue_delayed_work() combinations.
Unfortunately, a delayed_work item w/ zero @delay is handled slightly
differently by mod_delayed_work_on() compared to
queue_delayed_work_on(). The latter skips timer altogether and
directly queues it using queue_work_on() while the former schedules
timer which will expire on the closest tick. This means, when @delay
is zero, that [__]cancel_delayed_work() + queue_delayed_work_on()
makes the target item immediately executable while
mod_delayed_work_on() may induce delay of upto a full tick.
This somewhat subtle difference breaks some of the converted users.
e.g. block queue plugging uses delayed_work for deferred processing
and uses mod_delayed_work_on() when the queue needs to be immediately
unplugged. The above problem manifested as noticeably higher number
of context switches under certain circumstances.
The difference in behavior was caused by missing special case handling
for 0 delay in mod_delayed_work_on() compared to
queue_delayed_work_on(). Joonsoo Kim posted a patch to add it -
("workqueue: optimize mod_delayed_work_on() when @delay == 0")[1].
The patch was queued for 3.8 but it was described as optimization and
I missed that it was a correctness issue.
As both queue_delayed_work_on() and mod_delayed_work_on() use
__queue_delayed_work() for queueing, it seems that the better approach
is to move the 0 delay special handling to the function instead of
duplicating it in mod_delayed_work_on().
Fix the problem by moving 0 delay special case handling from
queue_delayed_work_on() to __queue_delayed_work(). This replaces
Joonsoo's patch.
[1] http://thread.gmane.org/gmane.linux.kernel/1379011/focus=1379012
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Anders Kaseorg <andersk@MIT.EDU>
Reported-and-tested-by: Zlatko Calusic <zlatko.calusic@iskon.hr>
LKML-Reference: <alpine.DEB.2.00.1211280953350.26602@dr-wily.mit.edu>
LKML-Reference: <50A78AA9.5040904@iskon.hr>
Cc: Joonsoo Kim <js1304@gmail.com>
A rescue thread exiting TASK_INTERRUPTIBLE can lead to a task scheduling
off, never to be seen again. In the case where this occurred, an exiting
thread hit reiserfs homebrew conditional resched while holding a mutex,
bringing the box to its knees.
PID: 18105 TASK: ffff8807fd412180 CPU: 5 COMMAND: "kdmflush"
#0 [ffff8808157e7670] schedule at ffffffff8143f489
#1 [ffff8808157e77b8] reiserfs_get_block at ffffffffa038ab2d [reiserfs]
#2 [ffff8808157e79a8] __block_write_begin at ffffffff8117fb14
#3 [ffff8808157e7a98] reiserfs_write_begin at ffffffffa0388695 [reiserfs]
#4 [ffff8808157e7ad8] generic_perform_write at ffffffff810ee9e2
#5 [ffff8808157e7b58] generic_file_buffered_write at ffffffff810eeb41
#6 [ffff8808157e7ba8] __generic_file_aio_write at ffffffff810f1a3a
#7 [ffff8808157e7c58] generic_file_aio_write at ffffffff810f1c88
#8 [ffff8808157e7cc8] do_sync_write at ffffffff8114f850
#9 [ffff8808157e7dd8] do_acct_process at ffffffff810a268f
[exception RIP: kernel_thread_helper]
RIP: ffffffff8144a5c0 RSP: ffff8808157e7f58 RFLAGS: 00000202
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8107af60 RDI: ffff8803ee491d18
RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
57b30ae77b ("workqueue: reimplement cancel_delayed_work() using
try_to_grab_pending()") made cancel_delayed_work() always return %true
unless someone else is also trying to cancel the work item, which is
broken - if the target work item is idle, the return value should be
%false.
try_to_grab_pending() indicates that the target work item was idle by
zero return value. Use it for return. Note that this brings
cancel_delayed_work() in line with __cancel_work_timer() in return
value handling.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <444a6439-b1a4-4740-9e7e-bc37267cfe73@default>
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
e0aecdd874 ("workqueue: use irqsafe timer for delayed_work") made
try_to_grab_pending() safe to use from irq context but forgot to
remove WARN_ON_ONCE(in_irq()). Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
workqueue_set_max_active() may increase ->max_active without
activating delayed works and may make the activation order differ from
the queueing order. Both aren't strictly bugs but the resulting
behavior could be a bit odd.
To make things more consistent, use cwq_set_max_active() helper which
immediately makes use of the newly increased max_mactive if there are
delayed work items and also keeps the activation order.
tj: Slight update to description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Using a helper instead of open code makes thaw_workqueues() clearer.
The helper will also be used by the next patch.
tj: Slight update to comment and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The existing work_on_cpu() implementation is hugely inefficient. It
creates a new kthread, execute that single function and then let the
kthread die on each invocation.
Now that system_wq can handle concurrent executions, there's no
advantage of doing this. Reimplement work_on_cpu() using system_wq
which makes it simpler and way more efficient.
stable: While this isn't a fix in itself, it's needed to fix a
workqueue related bug in cpufreq/powernow-k8. AFAICS, this
shouldn't break other existing users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@vger.kernel.org
@delayed is now always false for all callers, remove it.
tj: Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, when try_to_grab_pending() grabs a delayed work item, it
leaves its linked work items alone on the delayed_works. The linked
work items are always NO_COLOR and will cause future
cwq_activate_first_delayed() increase cwq->nr_active incorrectly, and
may cause the whole cwq to stall. For example,
state: cwq->max_active = 1, cwq->nr_active = 1
one work in cwq->pool, many in cwq->delayed_works.
step1: try_to_grab_pending() removes a work item from delayed_works
but leaves its NO_COLOR linked work items on it.
step2: Later on, cwq_activate_first_delayed() activates the linked
work item increasing ->nr_active.
step3: cwq->nr_active = 1, but all activated work items of the cwq are
NO_COLOR. When they finish, cwq->nr_active will not be
decreased due to NO_COLOR, and no further work items will be
activated from cwq->delayed_works. the cwq stalls.
Fix it by ensuring the target work item is activated before stealing
PENDING in try_to_grab_pending(). This ensures that all the linked
work items are activated without incorrectly bumping cwq->nr_active.
tj: Updated comment and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
workqueue_cpu_down_callback() is used only if HOTPLUG_CPU=y, so
hotcpu_notifier() fits better than cpu_notifier().
When HOTPLUG_CPU=y, hotcpu_notifier() and cpu_notifier() are the same.
When HOTPLUG_CPU=n, if we use cpu_notifier(),
workqueue_cpu_down_callback() will be called during boot to do
nothing, and the memory of workqueue_cpu_down_callback() and
gcwq_unbind_fn() will be discarded after boot.
If we use hotcpu_notifier(), we can avoid the no-op call of
workqueue_cpu_down_callback() and the memory of
workqueue_cpu_down_callback() and gcwq_unbind_fn() will be discard at
build time:
$ ls -l kernel/workqueue.o.cpu_notifier kernel/workqueue.o.hotcpu_notifier
-rw-rw-r-- 1 laijs laijs 484080 Sep 15 11:31 kernel/workqueue.o.cpu_notifier
-rw-rw-r-- 1 laijs laijs 478240 Sep 15 11:31 kernel/workqueue.o.hotcpu_notifier
$ size kernel/workqueue.o.cpu_notifier kernel/workqueue.o.hotcpu_notifier
text data bss dec hex filename
18513 2387 1221 22121 5669 kernel/workqueue.o.cpu_notifier
18082 2355 1221 21658 549a kernel/workqueue.o.hotcpu_notifier
tj: Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
For workqueue hotplug callbacks, it makes less sense to use __devinit
which discards the memory after boot if !HOTPLUG. __cpuinit, which
discards the memory after boot if !HOTPLUG_CPU fits better.
tj: Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that manager_mutex's role has changed from synchronizing manager
role to excluding hotplug against manager, the name is misleading.
As it is protecting the CPU-association of the gcwq now, rename it to
assoc_mutex.
This patch is pure rename and doesn't introduce any functional change.
tj: Updated comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now both worker destruction and idle rebinding remove the worker from
idle list while it's still idle, so list_empty(&worker->entry) can be
used to test whether either is pending and WORKER_DIE to distinguish
between the two instead making WORKER_REBIND unnecessary.
Use list_empty(&worker->entry) to determine whether destruction or
rebinding is pending. This simplifies worker state transitions.
WORKER_REBIND is not needed anymore. Remove it.
tj: Updated comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Because the old unbind/rebinding implementation wasn't atomic w.r.t.
GCWQ_DISASSOCIATED manipulation which is protected by
global_cwq->lock, we had to use two flags, WORKER_UNBOUND and
WORKER_REBIND, to avoid incorrectly losing all NOT_RUNNING bits with
back-to-back CPU hotplug operations; otherwise, completion of
rebinding while another unbinding is in progress could clear UNBIND
prematurely.
Now that both unbind/rebinding are atomic w.r.t. GCWQ_DISASSOCIATED,
there's no need to use two flags. Just one is enough. Don't use
WORKER_REBIND for busy rebinding.
tj: Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently rebind_workers() uses rebinds idle workers synchronously
before proceeding to requesting busy workers to rebind. This is
necessary because all workers on @worker_pool->idle_list must be bound
before concurrency management local wake-ups from the busy workers
take place.
Unfortunately, the synchronous idle rebinding is quite complicated.
This patch reimplements idle rebinding to simplify the code path.
Rather than trying to make all idle workers bound before rebinding
busy workers, we simply remove all to-be-bound idle workers from the
idle list and let them add themselves back after completing rebinding
(successful or not).
As only workers which finished rebinding can on on the idle worker
list, the idle worker list is guaranteed to have only bound workers
unless CPU went down again and local wake-ups are safe.
After the change, @worker_pool->nr_idle may deviate than the actual
number of idle workers on @worker_pool->idle_list. More specifically,
nr_idle may be non-zero while ->idle_list is empty. All users of
->nr_idle and ->idle_list are audited. The only affected one is
too_many_workers() which is updated to check %false if ->idle_list is
empty regardless of ->nr_idle.
After this patch, rebind_workers() no longer performs the nasty
idle-rebind retries which require temporary release of gcwq->lock, and
both unbinding and rebinding are atomic w.r.t. global_cwq->lock.
worker->idle_rebind and global_cwq->rebind_hold are now unnecessary
and removed along with the definition of struct idle_rebind.
Changed from V1:
1) remove unlikely from too_many_workers(), ->idle_list can be empty
anytime, even before this patch, no reason to use unlikely.
2) fix a small rebasing mistake.
(which is from rebasing the orignal fixing patch to for-next)
3) add a lot of comments.
4) clear WORKER_REBIND unconditionaly in idle_worker_rebind()
tj: Updated comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This merge is necessary as Lai's CPU hotplug restructuring series
depends on the CPU hotplug bug fixes in for-3.6-fixes.
The merge creates one trivial conflict between the following two
commits.
96e65306b8 "workqueue: UNBOUND -> REBIND morphing in rebind_workers() should be atomic"
e2b6a6d570 "workqueue: use system_highpri_wq for highpri workers in rebind_workers()"
Both add local variable definitions to the same block and can be
merged in any order.
Signed-off-by: Tejun Heo <tj@kernel.org>
To simplify both normal and CPU hotplug paths, worker management is
prevented while CPU hoplug is in progress. This is achieved by CPU
hotplug holding the same exclusion mechanism used by workers to ensure
there's only one manager per pool.
If someone else seems to be performing the manager role, workers
proceed to execute work items. CPU hotplug using the same mechanism
can lead to idle worker depletion because all workers could proceed to
execute work items while CPU hotplug is in progress and CPU hotplug
itself wouldn't actually perform the worker management duty - it
doesn't guarantee that there's an idle worker left when it releases
management.
This idle worker depletion, under extreme circumstances, can break
forward-progress guarantee and thus lead to deadlock.
This patch fixes the bug by using separate mechanisms for manager
exclusion among workers and hotplug exclusion. For manager exclusion,
POOL_MANAGING_WORKERS which was restored by the previous patch is
used. pool->manager_mutex is now only used for exclusion between the
elected manager and CPU hotplug. The elected manager won't proceed
without holding pool->manager_mutex.
This ensures that the worker which won the manager position can't skip
managing while CPU hotplug is in progress. It will block on
manager_mutex and perform management after CPU hotplug is complete.
Note that hotplug may happen while waiting for manager_mutex. A
manager isn't either on idle or busy list and thus the hoplug code
can't unbind/rebind it. Make the manager handle its own un/rebinding.
tj: Updated comment and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch restores POOL_MANAGING_WORKERS which was replaced by
pool->manager_mutex by 6037315269 "workqueue: use mutex for global_cwq
manager exclusion".
There's a subtle idle worker depletion bug across CPU hotplug events
and we need to distinguish an actual manager and CPU hotplug
preventing management. POOL_MANAGING_WORKERS will be used for the
former and manager_mutex the later.
This patch just lays POOL_MANAGING_WORKERS on top of the existing
manager_mutex and doesn't introduce any synchronization changes. The
next patch will update it.
Note that this patch fixes a non-critical anomaly where
too_many_workers() may return %true spuriously while CPU hotplug is in
progress. While the issue could schedule idle timer spuriously, it
didn't trigger any actual misbehavior.
tj: Rewrote patch description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, rebind_workers() and idle_worker_rebind() are two-way
interlocked. rebind_workers() waits for idle workers to finish
rebinding and rebound idle workers wait for rebind_workers() to finish
rebinding busy workers before proceeding.
Unfortunately, this isn't enough. The second wait from idle workers
is implemented as follows.
wait_event(gcwq->rebind_hold, !(worker->flags & WORKER_REBIND));
rebind_workers() clears WORKER_REBIND, wakes up the idle workers and
then returns. If CPU hotplug cycle happens again before one of the
idle workers finishes the above wait_event(), rebind_workers() will
repeat the first part of the handshake - set WORKER_REBIND again and
wait for the idle worker to finish rebinding - and this leads to
deadlock because the idle worker would be waiting for WORKER_REBIND to
clear.
This is fixed by adding another interlocking step at the end -
rebind_workers() now waits for all the idle workers to finish the
above WORKER_REBIND wait before returning. This ensures that all
rebinding steps are complete on all idle workers before the next
hotplug cycle can happen.
This problem was diagnosed by Lai Jiangshan who also posted a patch to
fix the issue, upon which this patch is based.
This is the minimal fix and further patches are scheduled for the next
merge window to simplify the CPU hotplug path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Original-patch-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1346516916-1991-3-git-send-email-laijs@cn.fujitsu.com>
This doesn't make any functional difference and is purely to help the
next patch to be simpler.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
The compiler may compile the following code into TWO write/modify
instructions.
worker->flags &= ~WORKER_UNBOUND;
worker->flags |= WORKER_REBIND;
so the other CPU may temporarily see worker->flags which doesn't have
either WORKER_UNBOUND or WORKER_REBIND set and perform local wakeup
prematurely.
Fix it by using single explicit assignment via ACCESS_ONCE().
Because idle workers have another WORKER_NOT_RUNNING flag, this bug
doesn't exist for them; however, update it to use the same pattern for
consistency.
tj: Applied the change to idle workers too and updated comments and
patch description a bit.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
cancel_delayed_work() can't be called from IRQ handlers due to its use
of del_timer_sync() and can't cancel work items which are already
transferred from timer to worklist.
Also, unlike other flush and cancel functions, a canceled delayed_work
would still point to the last associated cpu_workqueue. If the
workqueue is destroyed afterwards and the work item is re-used on a
different workqueue, the queueing code can oops trying to dereference
already freed cpu_workqueue.
This patch reimplements cancel_delayed_work() using
try_to_grab_pending() and set_work_cpu_and_clear_pending(). This
allows the function to be called from IRQ handlers and makes its
behavior consistent with other flush / cancel functions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Up to now, for delayed_works, try_to_grab_pending() couldn't be used
from IRQ handlers because IRQs may happen while
delayed_work_timer_fn() is in progress leading to indefinite -EAGAIN.
This patch makes delayed_work use the new TIMER_IRQSAFE flag for
delayed_work->timer. This makes try_to_grab_pending() and thus
mod_delayed_work_on() safe to call from IRQ handlers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that all workqueues are non-reentrant, system[_freezable]_wq() are
equivalent to system_nrt[_freezable]_wq(). Replace the latter with
wrappers around system[_freezable]_wq(). The wrapping goes through
inline functions so that __deprecated can be added easily.
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that all workqueues are non-reentrant, flush[_delayed]_work_sync()
are equivalent to flush[_delayed]_work(). Drop the separate
implementation and make them thin wrappers around
flush[_delayed]_work().
* start_flush_work() no longer takes @wait_executing as the only left
user - flush_work() - always sets it to %true.
* __cancel_work_timer() uses flush_work() instead of wait_on_work().
Signed-off-by: Tejun Heo <tj@kernel.org>
By default, each per-cpu part of a bound workqueue operates separately
and a work item may be executing concurrently on different CPUs. The
behavior avoids some cross-cpu traffic but leads to subtle weirdities
and not-so-subtle contortions in the API.
* There's no sane usefulness in allowing a single work item to be
executed concurrently on multiple CPUs. People just get the
behavior unintentionally and get surprised after learning about it.
Most either explicitly synchronize or use non-reentrant/ordered
workqueue but this is error-prone.
* flush_work() can't wait for multiple instances of the same work item
on different CPUs. If a work item is executing on cpu0 and then
queued on cpu1, flush_work() can only wait for the one on cpu1.
Unfortunately, work items can easily cross CPU boundaries
unintentionally when the queueing thread gets migrated. This means
that if multiple queuers compete, flush_work() can't even guarantee
that the instance queued right before it is finished before
returning.
* flush_work_sync() was added to work around some of the deficiencies
of flush_work(). In addition to the usual flushing, it ensures that
all currently executing instances are finished before returning.
This operation is expensive as it has to walk all CPUs and at the
same time fails to address competing queuer case.
Incorrectly using flush_work() when flush_work_sync() is necessary
is an easy error to make and can lead to bugs which are difficult to
reproduce.
* Similar problems exist for flush_delayed_work[_sync]().
Other than the cross-cpu access concern, there's no benefit in
allowing parallel execution and it's plain silly to have this level of
contortion for workqueue which is widely used from core code to
extremely obscure drivers.
This patch makes all workqueues non-reentrant. If a work item is
executing on a different CPU when queueing is requested, it is always
queued to that CPU. This guarantees that any given work item can be
executing on one CPU at maximum and if a work item is queued and
executing, both are on the same CPU.
The only behavior change which may affect workqueue users negatively
is that non-reentrancy overrides the affinity specified by
queue_work_on(). On a reentrant workqueue, the affinity specified by
queue_work_on() is always followed. Now, if the work item is
executing on one of the CPUs, the work item will be queued there
regardless of the requested affinity. I've reviewed all workqueue
users which request explicit affinity, and, fortunately, none seems to
be crazy enough to exploit parallel execution of the same work item.
This adds an additional busy_hash lookup if the work item was
previously queued on a different CPU. This shouldn't be noticeable
under any sane workload. Work item queueing isn't a very
high-frequency operation and they don't jump across CPUs all the time.
In a micro benchmark to exaggerate this difference - measuring the
time it takes for two work items to repeatedly jump between two CPUs a
number (10M) of times with busy_hash table densely populated, the
difference was around 3%.
While the overhead is measureable, it is only visible in pathological
cases and the difference isn't huge. This change brings much needed
sanity to workqueue and makes its behavior consistent with timer. I
think this is the right tradeoff to make.
This enables significant simplification of workqueue API.
Simplification patches will follow.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixed some checkpatch warnings.
tj: adapted to wq/for-3.7 and massaged pr_xxx() format strings a bit.
Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <1345326762-21747-1-git-send-email-valentin.ilie@gmail.com>
To speed cpu down processing up, use system_highpri_wq.
As scheduling priority of workers on it is higher than system_wq and
it is not contended by other normal works on this cpu, work on it
is processed faster than system_wq.
tj: CPU up/downs care quite a bit about latency these days. This
shouldn't hurt anything and makes sense.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In rebind_workers(), we do inserting a work to rebind to cpu for busy workers.
Currently, in this case, we use only system_wq. This makes a possible
error situation as there is mismatch between cwq->pool and worker->pool.
To prevent this, we should use system_highpri_wq for highpri worker
to match theses. This implements it.
tj: Rephrased comment a bit.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 3270476a6c ('workqueue: reimplement
WQ_HIGHPRI using a separate worker_pool') introduce separate worker pool
for HIGHPRI. When we handle busyworkers for gcwq, it can be normal worker
or highpri worker. But, we don't consider this difference in rebind_workers(),
we use just system_wq for highpri worker. It makes mismatch between
cwq->pool and worker->pool.
It doesn't make error in current implementation, but possible in the future.
Now, we introduce system_highpri_wq to use proper cwq for highpri workers
in rebind_workers(). Following patch fix this issue properly.
tj: Even apart from rebinding, having system_highpri_wq generally
makes sense.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We assign cpu id into work struct's data field in __queue_delayed_work_on().
In current implementation, when work is come in first time,
current running cpu id is assigned.
If we do __queue_delayed_work_on() with CPU A on CPU B,
__queue_work() invoked in delayed_work_timer_fn() go into
the following sub-optimal path in case of WQ_NON_REENTRANT.
gcwq = get_gcwq(cpu);
if (wq->flags & WQ_NON_REENTRANT &&
(last_gcwq = get_work_gcwq(work)) && last_gcwq != gcwq) {
Change lcpu to @cpu and rechange lcpu to local cpu if lcpu is WORK_CPU_UNBOUND.
It is sufficient to prevent to go into sub-optimal path.
tj: Slightly rephrased the comment.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When we do tracing workqueue_queue_work(), it records requested cpu.
But, if !(@wq->flag & WQ_UNBOUND) and @cpu is WORK_CPU_UNBOUND,
requested cpu is changed as local cpu.
In case of @wq->flag & WQ_UNBOUND, above change is not occured,
therefore it is reasonable to correct it.
Use temporary local variable for storing requested cpu.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 3270476a6c ('workqueue: reimplement
WQ_HIGHPRI using a separate worker_pool') introduce separate worker_pool
for HIGHPRI. Although there is NR_WORKER_POOLS enum value which represent
size of pools, definition of worker_pool in gcwq doesn't use it.
Using it makes code robust and prevent future mistakes.
So change code to use this enum value.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Any operation which clears PENDING should be preceded by a wmb to
guarantee that the next PENDING owner sees all the changes made before
PENDING release.
There are only two places where PENDING is cleared -
set_work_cpu_and_clear_pending() and clear_work_data(). The caller of
the former already does smp_wmb() but the latter doesn't have any.
Move the wmb above set_work_cpu_and_clear_pending() into it and add
one to clear_work_data().
There hasn't been any report related to this issue, and, given how
clear_work_data() is used, it is extremely unlikely to have caused any
actual problems on any architecture.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
delayed_work encodes the workqueue to use and the last CPU in
delayed_work->work.data while it's on timer. The target CPU is
implicitly recorded as the CPU the timer is queued on and
delayed_work_timer_fn() queues delayed_work->work to the CPU it is
running on.
Unfortunately, this leaves flush_delayed_work[_sync]() no way to find
out which CPU the delayed_work was queued for when they try to
re-queue after killing the timer. Currently, it chooses the local CPU
flush is running on. This can unexpectedly move a delayed_work queued
on a specific CPU to another CPU and lead to subtle errors.
There isn't much point in trying to save several bytes in struct
delayed_work, which is already close to a hundred bytes on 64bit with
all debug options turned off. This patch adds delayed_work->cpu to
remember the CPU it's queued for.
Note that if the timer is migrated during CPU down, the work item
could be queued to the downed global_cwq after this change. As a
detached global_cwq behaves like an unbound one, this doesn't change
much for the delayed_work.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Workqueue was lacking a mechanism to modify the timeout of an already
pending delayed_work. delayed_work users have been working around
this using several methods - using an explicit timer + work item,
messing directly with delayed_work->timer, and canceling before
re-queueing, all of which are error-prone and/or ugly.
This patch implements mod_delayed_work[_on]() which behaves similarly
to mod_timer() - if the delayed_work is idle, it's queued with the
given delay; otherwise, its timeout is modified to the new value.
Zero @delay guarantees immediate execution.
v2: Updated to reflect try_to_grab_pending() changes. Now safe to be
called from bh context.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
There can be two reasons try_to_grab_pending() can fail with -EAGAIN.
One is when someone else is queueing or deqeueing the work item. With
the previous patches, it is guaranteed that PENDING and queued state
will soon agree making it safe to busy-retry in this case.
The other is if multiple __cancel_work_timer() invocations are racing
one another. __cancel_work_timer() grabs PENDING and then waits for
running instances of the target work item on all CPUs while holding
PENDING and !queued. try_to_grab_pending() invoked from another task
will keep returning -EAGAIN while the current owner is waiting.
Not distinguishing the two cases is okay because __cancel_work_timer()
is the only user of try_to_grab_pending() and it invokes
wait_on_work() whenever grabbing fails. For the first case, busy
looping should be fine but wait_on_work() doesn't cause any critical
problem. For the latter case, the new contender usually waits for the
same condition as the current owner, so no unnecessarily extended
busy-looping happens. Combined, these make __cancel_work_timer()
technically correct even without irq protection while grabbing PENDING
or distinguishing the two different cases.
While the current code is technically correct, not distinguishing the
two cases makes it difficult to use try_to_grab_pending() for other
purposes than canceling because it's impossible to tell whether it's
safe to busy-retry grabbing.
This patch adds a mechanism to mark a work item being canceled.
try_to_grab_pending() now disables irq on success and returns -EAGAIN
to indicate that grabbing failed but PENDING and queued states are
gonna agree soon and it's safe to busy-loop. It returns -ENOENT if
the work item is being canceled and it may stay PENDING && !queued for
arbitrary amount of time.
__cancel_work_timer() is modified to mark the work canceling with
WORK_OFFQ_CANCELING after grabbing PENDING, thus making
try_to_grab_pending() fail with -ENOENT instead of -EAGAIN. Also, it
invokes wait_on_work() iff grabbing failed with -ENOENT. This isn't
necessary for correctness but makes it consistent with other future
users of try_to_grab_pending().
v2: try_to_grab_pending() was testing preempt_count() to ensure that
the caller has disabled preemption. This triggers spuriously if
!CONFIG_PREEMPT_COUNT. Use preemptible() instead. Reported by
Fengguang Wu.
v3: Updated so that try_to_grab_pending() disables irq on success
rather than requiring preemption disabled by the caller. This
makes busy-looping easier and will allow try_to_grap_pending() to
be used from bh/irq contexts.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
* Use bool @is_dwork instead of @timer and let try_to_grab_pending()
use to_delayed_work() to determine the delayed_work address.
* Move timer handling from __cancel_work_timer() to
try_to_grab_pending().
* Make try_to_grab_pending() use -EAGAIN instead of -1 for
busy-looping and drop the ret local variable.
* Add proper function comment to try_to_grab_pending().
This makes the code a bit easier to understand and will ease further
changes. This patch doesn't make any functional change.
v2: Use @is_dwork instead of @timer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Low WORK_STRUCT_FLAG_BITS bits of work_struct->data contain
WORK_STRUCT_FLAG_* and flush color. If the work item is queued, the
rest point to the cpu_workqueue with WORK_STRUCT_CWQ set; otherwise,
WORK_STRUCT_CWQ is clear and the bits contain the last CPU number -
either a real CPU number or one of WORK_CPU_*.
Scheduled addition of mod_delayed_work[_on]() requires an additional
flag, which is used only while a work item is off queue. There are
more than enough bits to represent off-queue CPU number on both 32 and
64bits. This patch introduces WORK_OFFQ_FLAG_* which occupy the lower
part of the @work->data high bits while off queue. This patch doesn't
define any actual OFFQ flag yet.
Off-queue CPU number is now shifted by WORK_OFFQ_CPU_SHIFT, which adds
the number of bits used by OFFQ flags to WORK_STRUCT_FLAG_SHIFT, to
make room for OFFQ flags.
To avoid shift width warning with large WORK_OFFQ_FLAG_BITS, ulong
cast is added to WORK_STRUCT_NO_CPU and, just in case, BUILD_BUG_ON()
to check that there are enough bits to accomodate off-queue CPU number
is added.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
try_to_grab_pending() will be used by to-be-implemented
mod_delayed_work[_on](). Move try_to_grab_pending() and related
functions above queueing functions.
This patch only moves functions around.
Signed-off-by: Tejun Heo <tj@kernel.org>
If @delay is zero and the dealyed_work is idle, queue_delayed_work()
queues it for immediate execution; however, queue_delayed_work_on()
lacks this logic and always goes through timer regardless of @delay.
This patch moves 0 @delay handling logic from queue_delayed_work() to
queue_delayed_work_on() so that both functions behave the same.
Signed-off-by: Tejun Heo <tj@kernel.org>
Queueing functions have been using different methods to determine the
local CPU.
* queue_work() superflously uses get/put_cpu() to acquire and hold the
local CPU across queue_work_on().
* delayed_work_timer_fn() uses smp_processor_id().
* queue_delayed_work() calls queue_delayed_work_on() with -1 @cpu
which is interpreted as the local CPU.
* flush_delayed_work[_sync]() were using raw_smp_processor_id().
* __queue_work() interprets %WORK_CPU_UNBOUND as local CPU if the
target workqueue is bound one but nobody uses this.
This patch converts all functions to uniformly use %WORK_CPU_UNBOUND
to indicate local CPU and use the local binding feature of
__queue_work(). unlikely() is dropped from %WORK_CPU_UNBOUND handling
in __queue_work().
Signed-off-by: Tejun Heo <tj@kernel.org>
delayed_work->timer.function is currently initialized during
queue_delayed_work_on(). Export delayed_work_timer_fn() and set
delayed_work timer function during delayed_work initialization
together with other fields.
This ensures the timer function is always valid on an initialized
delayed_work. This is to help mod_delayed_work() implementation.
To detect delayed_work users which diddle with the internal timer,
trigger WARN if timer function doesn't match on queue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Queueing operations use WORK_STRUCT_PENDING_BIT to synchronize access
to the target work item. They first try to claim the bit and proceed
with queueing only after that succeeds and there's a window between
PENDING being set and the actual queueing where the task can be
interrupted or preempted.
There's also a similar window in process_one_work() when clearing
PENDING. A work item is dequeued, gcwq->lock is released and then
PENDING is cleared and the worker might get interrupted or preempted
between releasing gcwq->lock and clearing PENDING.
cancel[_delayed]_work_sync() tries to claim or steal PENDING. The
function assumes that a work item with PENDING is either queued or in
the process of being [de]queued. In the latter case, it busy-loops
until either the work item loses PENDING or is queued. If canceling
coincides with the above described interrupts or preemptions, the
canceling task will busy-loop while the queueing or executing task is
preempted.
This patch keeps irq disabled across claiming PENDING and actual
queueing and moves PENDING clearing in process_one_work() inside
gcwq->lock so that busy looping from PENDING && !queued doesn't wait
for interrupted/preempted tasks. Note that, in process_one_work(),
setting last CPU and clearing PENDING got merged into single
operation.
This removes possible long busy-loops and will allow using
try_to_grab_pending() from bh and irq contexts.
v2: __queue_work() was testing preempt_count() to ensure that the
caller has disabled preemption. This triggers spuriously if
!CONFIG_PREEMPT_COUNT. Use preemptible() instead. Reported by
Fengguang Wu.
v3: Disable irq instead of preemption. IRQ will be disabled while
grabbing gcwq->lock later anyway and this allows using
try_to_grab_pending() from bh and irq contexts.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
WORK_STRUCT_PENDING is used to claim ownership of a work item and
process_one_work() releases it before starting execution. When
someone else grabs PENDING, all pre-release updates to the work item
should be visible and all updates made by the new owner should happen
afterwards.
Grabbing PENDING uses test_and_set_bit() and thus has a full barrier;
however, clearing doesn't have a matching wmb. Given the preceding
spin_unlock and use of clear_bit, I don't believe this can be a
problem on an actual machine and there hasn't been any related report
but it still is theretically possible for clear_pending to permeate
upwards and happen before work->entry update.
Add an explicit smp_wmb() before work_clear_pending().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
All queueing functions return 1 on success, 0 if the work item was
already pending. Update them to return bool instead. This signifies
better that they don't return 0 / -errno.
This is cleanup and doesn't cause any functional difference.
While at it, fix comment opening for schedule_work_on().
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, queue/schedule[_delayed]_work_on() are located below the
counterpart without the _on postifx even though the latter is usually
implemented using the former. Swap them.
This is cleanup and doesn't cause any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
25511a4776 "workqueue: reimplement CPU online rebinding to handle idle
workers" added CPU locality sanity check in process_one_work(). It
triggers if a worker is executing on a different CPU without UNBOUND
or REBIND set.
This works for all normal workers but rescuers can trigger this
spuriously when they're serving the unbound or a disassociated
global_cwq - rescuers don't have either flag set and thus its
gcwq->cpu can be a different value including %WORK_CPU_UNBOUND.
Fix it by additionally testing %GCWQ_DISASSOCIATED.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
LKML-Refence: <20120721213656.GA7783@linux.vnet.ibm.com>
With trustee gone, CPU hotplug code can be simplified.
* gcwq_claim/release_management() now grab and release gcwq lock too
respectively and gained _and_lock and _and_unlock postfixes.
* All CPU hotplug logic was implemented in workqueue_cpu_callback()
which was called by workqueue_cpu_up/down_callback() for the correct
priority. This was because up and down paths shared a lot of logic,
which is no longer true. Remove workqueue_cpu_callback() and move
all hotplug logic into the two actual callbacks.
This patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
With the previous changes, a disassociated global_cwq now can run as
an unbound one on its own - it can create workers as necessary to
drain remaining works after the CPU has been brought down and manage
the number of workers using the usual idle timer mechanism making
trustee completely redundant except for the actual unbinding
operation.
This patch removes the trustee and let a disassociated global_cwq
manage itself. Unbinding is moved to a work item (for CPU affinity)
which is scheduled and flushed from CPU_DONW_PREPARE.
This patch moves nr_running clearing outside gcwq and manager locks to
simplify the code. As nr_running is unused at the point, this is
safe.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Currently, during CPU offlining, after all pending work items are
drained, the trustee butchers all workers. Also, on CPU onlining
failure, workqueue_cpu_callback() ensures that the first idle worker
is destroyed. Combined, these guarantee that an offline CPU doesn't
have any worker for it once all the lingering work items are finished.
This guarantee isn't really necessary and makes CPU on/offlining more
expensive than needs to be, especially for platforms which use CPU
hotplug for powersaving.
This patch lets offline CPUs removes idle worker butchering from the
trustee and let a CPU which failed onlining keep the created first
worker. The first worker is created if the CPU doesn't have any
during CPU_DOWN_PREPARE and started right away. If onlining succeeds,
the rebind_workers() call in CPU_ONLINE will rebind it like any other
workers. If onlining fails, the worker is left alone till the next
try.
This makes CPU hotplugs cheaper by allowing global_cwqs to keep
workers across them and simplifies code.
Note that trustee doesn't re-arm idle timer when it's done and thus
the disassociated global_cwq will keep all workers until it comes back
online. This will be improved by further patches.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Currently, if there are left workers when a CPU is being brough back
online, the trustee kills all idle workers and scheduled rebind_work
so that they re-bind to the CPU after the currently executing work is
finished. This works for busy workers because concurrency management
doesn't try to wake up them from scheduler callbacks, which require
the target task to be on the local run queue. The busy worker bumps
concurrency counter appropriately as it clears WORKER_UNBOUND from the
rebind work item and it's bound to the CPU before returning to the
idle state.
To reduce CPU on/offlining overhead (as many embedded systems use it
for powersaving) and simplify the code path, workqueue is planned to
be modified to retain idle workers across CPU on/offlining. This
patch reimplements CPU online rebinding such that it can also handle
idle workers.
As noted earlier, due to the local wakeup requirement, rebinding idle
workers is tricky. All idle workers must be re-bound before scheduler
callbacks are enabled. This is achieved by interlocking idle
re-binding. Idle workers are requested to re-bind and then hold until
all idle re-binding is complete so that no bound worker starts
executing work item. Only after all idle workers are re-bound and
parked, CPU_ONLINE proceeds to release them and queue rebind work item
to busy workers thus guaranteeing scheduler callbacks aren't invoked
until all idle workers are ready.
worker_rebind_fn() is renamed to busy_worker_rebind_fn() and
idle_worker_rebind() for idle workers is added. Rebinding logic is
moved to rebind_workers() and now called from CPU_ONLINE after
flushing trustee. While at it, add CPU sanity check in
worker_thread().
Note that now a worker may become idle or the manager between trustee
release and rebinding during CPU_ONLINE. As the previous patch
updated create_worker() so that it can be used by regular manager
while unbound and this patch implements idle re-binding, this is safe.
This prepares for removal of trustee and keeping idle workers across
CPU hotplugs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Currently, create_worker()'s callers are responsible for deciding
whether the newly created worker should be bound to the associated CPU
and create_worker() sets WORKER_UNBOUND only for the workers for the
unbound global_cwq. Creation during normal operation is always via
maybe_create_worker() and @bind is true. For workers created during
hotplug, @bind is false.
Normal operation path is planned to be used even while the CPU is
going through hotplug operations or offline and this static decision
won't work.
Drop @bind from create_worker() and decide whether to bind by looking
at GCWQ_DISASSOCIATED. create_worker() will also set WORKER_UNBOUND
autmatically if disassociated. To avoid flipping GCWQ_DISASSOCIATED
while create_worker() is in progress, the flag is now allowed to be
changed only while holding all manager_mutexes on the global_cwq.
This requires that GCWQ_DISASSOCIATED is not cleared behind trustee's
back. CPU_ONLINE no longer clears DISASSOCIATED before flushing
trustee, which clears DISASSOCIATED before rebinding remaining workers
if asked to release. For cases where trustee isn't around, CPU_ONLINE
clears DISASSOCIATED after flushing trustee. Also, now, first_idle
has UNBOUND set on creation which is explicitly cleared by CPU_ONLINE
while binding it. These convolutions will soon be removed by further
simplification of CPU hotplug path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
POOL_MANAGING_WORKERS is used to ensure that at most one worker takes
the manager role at any given time on a given global_cwq. Trustee
later hitched on it to assume manager adding blocking wait for the
bit. As trustee already needed a custom wait mechanism, waiting for
MANAGING_WORKERS was rolled into the same mechanism.
Trustee is scheduled to be removed. This patch separates out
MANAGING_WORKERS wait into per-pool mutex. Workers use
mutex_trylock() to test for manager role and trustee uses mutex_lock()
to claim manager roles.
gcwq_claim/release_management() helpers are added to grab and release
manager roles of all pools on a global_cwq. gcwq_claim_management()
always grabs pool manager mutexes in ascending pool index order and
uses pool index as lockdep subclass.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Currently, WORKER_UNBOUND is used to mark workers for the unbound
global_cwq and WORKER_ROGUE is used to mark workers for disassociated
per-cpu global_cwqs. Both are used to make the marked worker skip
concurrency management and the only place they make any difference is
in worker_enter_idle() where WORKER_ROGUE is used to skip scheduling
idle timer, which can easily be replaced with trustee state testing.
This patch replaces WORKER_ROGUE with WORKER_UNBOUND and drops
WORKER_ROGUE. This is to prepare for removing trustee and handling
disassociated global_cwqs as unbound.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Workqueue used CPU_DYING notification to mark GCWQ_DISASSOCIATED.
This was necessary because workqueue's CPU_DOWN_PREPARE happened
before other DOWN_PREPARE notifiers and workqueue needed to stay
associated across the rest of DOWN_PREPARE.
After the previous patch, workqueue's DOWN_PREPARE happens after
others and can set GCWQ_DISASSOCIATED directly. Drop CPU_DYING and
let the trustee set GCWQ_DISASSOCIATED after disabling concurrency
management.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Currently, all workqueue cpu hotplug operations run off
CPU_PRI_WORKQUEUE which is higher than normal notifiers. This is to
ensure that workqueue is up and running while bringing up a CPU before
other notifiers try to use workqueue on the CPU.
Per-cpu workqueues are supposed to remain working and bound to the CPU
for normal CPU_DOWN_PREPARE notifiers. This holds mostly true even
with workqueue offlining running with higher priority because
workqueue CPU_DOWN_PREPARE only creates a bound trustee thread which
runs the per-cpu workqueue without concurrency management without
explicitly detaching the existing workers.
However, if the trustee needs to create new workers, it creates
unbound workers which may wander off to other CPUs while
CPU_DOWN_PREPARE notifiers are in progress. Furthermore, if the CPU
down is cancelled, the per-CPU workqueue may end up with workers which
aren't bound to the CPU.
While reliably reproducible with a convoluted artificial test-case
involving scheduling and flushing CPU burning work items from CPU down
notifiers, this isn't very likely to happen in the wild, and, even
when it happens, the effects are likely to be hidden by the following
successful CPU down.
Fix it by using different priorities for up and down notifiers - high
priority for up operations and low priority for down operations.
Workqueue cpu hotplug operations will soon go through further cleanup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
WQ_HIGHPRI was implemented by queueing highpri work items at the head
of the global worklist. Other than queueing at the head, they weren't
handled differently; unfortunately, this could lead to execution
latency of a few seconds on heavily loaded systems.
Now that workqueue code has been updated to deal with multiple
worker_pools per global_cwq, this patch reimplements WQ_HIGHPRI using
a separate worker_pool. NR_WORKER_POOLS is bumped to two and
gcwq->pools[0] is used for normal pri work items and ->pools[1] for
highpri. Highpri workers get -20 nice level and has 'H' suffix in
their names. Note that this change increases the number of kworkers
per cpu.
POOL_HIGHPRI_PENDING, pool_determine_ins_pos() and highpri chain
wakeup code in process_one_work() are no longer used and removed.
This allows proper prioritization of highpri work items and removes
high execution latency of highpri work items.
v2: nr_running indexing bug in get_pool_nr_running() fixed.
v3: Refreshed for the get_pool_nr_running() update in the previous
patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Josh Hunt <joshhunt00@gmail.com>
LKML-Reference: <CAKA=qzaHqwZ8eqpLNFjxnO2fX-tgAOjmpvxgBFjv6dJeQaOW1w@mail.gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Introduce NR_WORKER_POOLS and for_each_worker_pool() and convert code
paths which need to manipulate all pools in a gcwq to use them.
NR_WORKER_POOLS is currently one and for_each_worker_pool() iterates
over only @gcwq->pool.
Note that nr_running is per-pool property and converted to an array
with NR_WORKER_POOLS elements and renamed to pool_nr_running. Note
that get_pool_nr_running() currently assumes 0 index. The next patch
will make use of non-zero index.
The changes in this patch are mechanical and don't caues any
functional difference. This is to prepare for multiple pools per
gcwq.
v2: nr_running indexing bug in get_pool_nr_running() fixed.
v3: Pointer to array is stupid. Don't use it in get_pool_nr_running()
as suggested by Linus.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
GCWQ_MANAGE_WORKERS, GCWQ_MANAGING_WORKERS and GCWQ_HIGHPRI_PENDING
are per-pool properties. Add worker_pool->flags and make the above
three flags per-pool flags.
The changes in this patch are mechanical and don't caues any
functional difference. This is to prepare for multiple pools per
gcwq.
Signed-off-by: Tejun Heo <tj@kernel.org>
Modify all functions which deal with per-pool properties to pass
around @pool instead of @gcwq or @cpu.
The changes in this patch are mechanical and don't caues any
functional difference. This is to prepare for multiple pools per
gcwq.
Signed-off-by: Tejun Heo <tj@kernel.org>
Move worklist and all worker management fields from global_cwq into
the new struct worker_pool. worker_pool points back to the containing
gcwq. worker and cpu_workqueue_struct are updated to point to
worker_pool instead of gcwq too.
This change is mechanical and doesn't introduce any functional
difference other than rearranging of fields and an added level of
indirection in some places. This is to prepare for multiple pools per
gcwq.
v2: Comment typo fixes as suggested by Namhyung.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Unbound wqs aren't concurrency-managed and try to execute work items
as soon as possible. This is currently achieved by implicitly setting
%WQ_HIGHPRI on all unbound workqueues; however, WQ_HIGHPRI
implementation is about to be restructured and this usage won't be
valid anymore.
Add an explicit chain-wakeup path for unbound workqueues in
process_one_work() instead of piggy backing on %WQ_HIGHPRI.
Signed-off-by: Tejun Heo <tj@kernel.org>
Under memory load, on x86_64, with lockdep enabled, the workqueue's
process_one_work() has been seen to oops in __lock_acquire(), barfing
on a 0xffffffff00000000 pointer in the lockdep_map's class_cache[].
Because it's permissible to free a work_struct from its callout function,
the map used is an onstack copy of the map given in the work_struct: and
that copy is made without any locking.
Surprisingly, gcc (4.5.1 in Hugh's case) uses "rep movsl" rather than
"rep movsq" for that structure copy: which might race with a workqueue
user's wait_on_work() doing lock_map_acquire() on the source of the
copy, putting a pointer into the class_cache[], but only in time for
the top half of that pointer to be copied to the destination map.
Boom when process_one_work() subsequently does lock_map_acquire()
on its onstack copy of the lockdep_map.
Fix this, and a similar instance in call_timer_fn(), with a
lockdep_copy_map() function which additionally NULLs the class_cache[].
Note: this oops was actually seen on 3.4-next, where flush_work() newly
does the racing lock_map_acquire(); but Tejun points out that 3.4 and
earlier are already vulnerable to the same through wait_on_work().
* Patch orginally from Peter. Hugh modified it a bit and wrote the
description.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Reported-by: Hugh Dickins <hughd@google.com>
LKML-Reference: <alpine.LSU.2.00.1205070951170.1544@eggly.anvils>
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_enter_idle() has WARN_ON_ONCE() which triggers if nr_running
isn't zero when every worker is idle. This can trigger spuriously
while a cpu is going down due to the way trustee sets %WORKER_ROGUE
and zaps nr_running.
It first sets %WORKER_ROGUE on all workers without updating
nr_running, releases gcwq->lock, schedules, regrabs gcwq->lock and
then zaps nr_running. If the last running worker enters idle
inbetween, it would see stale nr_running which hasn't been zapped yet
and trigger the WARN_ON_ONCE().
Fix it by performing the sanity check iff the trustee is idle.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
If a workqueue is flushed with flush_work() lockdep checking can
be circumvented. For example:
static DEFINE_MUTEX(mutex);
static void my_work(struct work_struct *w)
{
mutex_lock(&mutex);
mutex_unlock(&mutex);
}
static DECLARE_WORK(work, my_work);
static int __init start_test_module(void)
{
schedule_work(&work);
return 0;
}
module_init(start_test_module);
static void __exit stop_test_module(void)
{
mutex_lock(&mutex);
flush_work(&work);
mutex_unlock(&mutex);
}
module_exit(stop_test_module);
would not always print a warning when flush_work() was called.
In this trivial example nothing could go wrong since we are
guaranteed module_init() and module_exit() don't run concurrently,
but if the work item is schedule asynchronously we could have a
scenario where the work item is running just at the time flush_work()
is called resulting in a classic ABBA locking problem.
Add a lockdep hint by acquiring and releasing the work item
lockdep_map in flush_work() so that we always catch this
potential deadlock scenario.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This BUG_ON() can be triggered if you call schedule_work() before
calling INIT_WORK(). It is a bug definitely, but it's nicer to just
print a stack trace and return.
Reported-by: Matt Renzelmann <mjr@cs.wisc.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull workqueue changes from Tejun Heo:
"This contains only one commit which cleans up UP allocation path a
bit."
* 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: use percpu allocator for cwq on UP
I notice that the commit bbddff makes percpu allocator can work on UP,
So we don't need the magic way for UP.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch (as1519) fixes a bug in the block layer's disk-events
polling. The polling is done by a work routine queued on the
system_nrt_wq workqueue. Since that workqueue isn't freezable, the
polling continues even in the middle of a system sleep transition.
Obviously, polling a suspended drive for media changes and such isn't
a good thing to do; in the case of USB mass-storage devices it can
lead to real problems requiring device resets and even re-enumeration.
The patch fixes things by creating a new system-wide, non-reentrant,
freezable workqueue and using it for disk-events polling.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
alloc_workqueue() currently expects the passed in @name pointer to remain
accessible. This is inconvenient and a bit silly given that the whole wq
is being dynamically allocated. This patch updates alloc_workqueue() and
friends to take printf format string instead of opaque string and matching
varargs at the end. The name is allocated together with the wq and
formatted.
alloc_ordered_workqueue() is converted to a macro to unify varargs
handling with alloc_workqueue(), and, while at it, add comment to
alloc_workqueue().
None of the current in-kernel users pass in string with '%' as constant
name and this change shouldn't cause any problem.
[akpm@linux-foundation.org: use __printf]
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else. Revector them
onto the isolated export header for faster compile times.
Nothing to see here but a whole lot of instances of:
-#include <linux/module.h>
+#include <linux/export.h>
This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Take cwq->gcwq->lock to avoid racing between drain_workqueue checking to
make sure the workqueues are empty and cwq_dec_nr_in_flight decrementing
and then incrementing nr_active when it activates a delayed work.
We discovered this when a corner case in one of our drivers resulted in
us trying to destroy a workqueue in which the remaining work would
always requeue itself again in the same workqueue. We would hit this
race condition and trip the BUG_ON on workqueue.c:3080.
Signed-off-by: Thomas Tuttle <ttuttle@chromium.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: separate out drain_workqueue() from destroy_workqueue()
workqueue: remove cancel_rearming_delayed_work[queue]()
* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: Unify input section names
percpu: Avoid extra NOP in percpu_cmpxchg16b_double
percpu: Cast away printk format warning
percpu: Always align percpu output section to PAGE_SIZE
Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
There are users which want to drain workqueues without destroying it.
Separate out drain functionality from destroy_workqueue() into
drain_workqueue() and make it accessible to workqueue users.
To guarantee forward-progress, only chain queueing is allowed while
drain is in progress. If a new work item which isn't chained from the
running or pending work items is queued while draining is in progress,
WARN_ON_ONCE() is triggered.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
If a rescuer and stop_machine() bringing down a CPU race with each
other, they may deadlock on non-preemptive kernel. The CPU won't
accept a new task, so the rescuer can't migrate to the target CPU,
while stop_machine() can't proceed because the rescuer is holding one
of the CPU retrying migration. GCWQ_DISASSOCIATED is never cleared
and worker_maybe_bind_and_lock() retries indefinitely.
This problem can be reproduced semi reliably while the system is
entering suspend.
http://thread.gmane.org/gmane.linux.kernel/1122051
A lot of kudos to Thilo-Alexander for reporting this tricky issue and
painstaking testing.
stable: This affects all kernels with cmwq, so all kernels since and
including v2.6.36 need this fix.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Thilo-Alexander Ginkel <thilo@ginkel.com>
Tested-by: Thilo-Alexander Ginkel <thilo@ginkel.com>
Cc: stable@kernel.org
Percpu allocator honors alignment request upto PAGE_SIZE and both the
percpu addresses in the percpu address space and the translated kernel
addresses should be aligned accordingly. The calculation of the
former depends on the alignment of percpu output section in the kernel
image.
The linker script macros PERCPU_VADDR() and PERCPU() are used to
define this output section and the latter takes @align parameter.
Several architectures are using @align smaller than PAGE_SIZE breaking
percpu memory alignment.
This patch removes @align parameter from PERCPU(), renames it to
PERCPU_SECTION() and makes it always align to PAGE_SIZE. While at it,
add PCPU_SETUP_BUG_ON() checks such that alignment problems are
reliably detected and remove percpu alignment comment recently added
in workqueue.c as the condition would trigger BUG way before reaching
there.
For um, this patch raises the alignment of percpu area. As the area
is in .init, there shouldn't be any noticeable difference.
This problem was discovered by David Howells while debugging boot
failure on mn10300.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: user-mode-linux-devel@lists.sourceforge.net
ksoftirqd, kworker, migration, and pktgend kthreads can be created with
kthread_create_on_node(), to get proper NUMA affinities for their stack and
task_struct.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix build failure introduced by s/freezeable/freezable/
workqueue: add system_freezeable_wq
rds/ib: use system_wq instead of rds_ib_fmr_wq
net/9p: replace p9_poll_task with a work
net/9p: use system_wq instead of p9_mux_wq
xfs: convert to alloc_workqueue()
reiserfs: make commit_wq use the default concurrency level
ocfs2: use system_wq instead of ocfs2_quota_wq
ext4: convert to alloc_workqueue()
scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
misc/iwmc3200top: use system_wq instead of dedicated workqueues
i2o: use alloc_workqueue() instead of create_workqueue()
acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
fs/aio: aio_wq isn't used in memory reclaim path
input/tps6507x-ts: use system_wq instead of dedicated workqueue
cpufreq: use system_wq instead of dedicated workqueues
wireless/ipw2x00: use system_wq instead of dedicated workqueues
arm/omap: use system_wq in mailbox
workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
In complex subsystems like mac80211 structures can contain several
timers and work structs, so identifying a specific instance from the
call trace and object type output of debugobjects can be hard.
Allow the subsystems which support debugobjects to provide a hint
function. This function returns a pointer to a kernel address
(preferrably the objects callback function) which is printed along
with the debugobjects type.
Add hint methods for timer_list, work_struct and hrtimer.
[ tglx: Massaged changelog, made it compile ]
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
LKML-Reference: <20110307085809.GA9334@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
wq:fixes-2.6.38 does s/WQ_FREEZEABLE/WQ_FREEZABLE and wq:for-2.6.39
adds new usage of the flag. The combination of the two creates a
build failure after merge. Fix it by renaming all freezeables to
freezables.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
MAYDAY_INITIAL_TIMEOUT is defined as HZ / 100 and depending on
configuration may end up 0 or 1. Even when it's 1, depending on when
the mayday timer is added in the current jiffy interval, it may expire
way before a jiffy has passed.
Make sure MAYDAY_INITIAL_TIMEOUT is at least two to guarantee that at
least a full jiffy has passed before calling rescuers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ray Jui <rjui@broadcom.com>
Cc: stable@kernel.org
There are two spellings in use for 'freeze' + 'able' - 'freezable' and
'freezeable'. The former is the more prominent one. The latter is
mostly used by workqueue and in a few other odd places. Unify the
spelling to 'freezable'.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Steven Whitehouse <swhiteho@redhat.com>
After executing the matching works, a rescuer leaves the gcwq whether
there are more pending works or not. This may decrease the
concurrency level to zero and stall execution until a new work item is
queued on the gcwq.
Make rescuer wake up a regular worker when it leaves a gcwq if there
are more works to execute, so that execution isn't stalled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ray Jui <rjui@broadcom.com>
Cc: stable@kernel.org
The nested NOT_RUNNING test in worker_clr_flags() is slightly
misleading in that if NOT_RUNNING were a single flag the nested test
would be always %true and thus noop. Add a comment noting that the
test isn't a noop.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Currently, the lockdep annotation in flush_work() requires exclusive
access on the workqueue the target work is queued on and triggers
warning if a work is trying to flush another work on the same
workqueue; however, this is no longer true as workqueues can now
execute multiple works concurrently.
This patch adds lock_map_acquire_read() and make process_one_work()
hold read access to the workqueue while executing a work and
start_flush_work() check for write access if concurrnecy level is one
or the workqueue has a rescuer (as only one execution resource - the
rescuer - is guaranteed to be available under memory pressure), and
read access if higher.
This better represents what's going on and removes spurious lockdep
warnings which are triggered by fake dependency chain created through
flush_work().
* Peter pointed out that flushing another work from a WQ_MEM_RECLAIM
wq breaks forward progress guarantee under memory pressure.
Condition check accordingly updated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org
Currently, destroy_workqueue() makes the workqueue deny all new
queueing by setting WQ_DYING and flushes the workqueue once before
proceeding with destruction; however, there are cases where work items
queue more related work items. Currently, such users need to
explicitly flush the workqueue multiple times depending on the
possible depth of such chained queueing.
This patch updates the queueing path such that a work item can queue
further work items on the same workqueue even when WQ_DYING is set.
The flush on destruction is automatically retried until the workqueue
is empty. This guarantees that the workqueue is empty on destruction
while allowing chained queueing.
The flush retry logic whines if it takes too many retries to drain the
workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Running the annotate branch profiler on three boxes, including my
main box that runs firefox, evolution, xchat, and is part of the distcc farm,
showed this with the likelys in the workqueue code:
correct incorrect % Function File Line
------- --------- - -------- ---- ----
96 996253 99 wq_worker_sleeping workqueue.c 703
96 996247 99 wq_worker_waking_up workqueue.c 677
The likely()s in this case were assuming that WORKER_NOT_RUNNING will
most likely be false. But this is not the case. The reason is
(and shown by adding trace_printks and testing it) that most of the time
WORKER_PREP is set.
In worker_thread() we have:
worker_clr_flags(worker, WORKER_PREP);
[ do work stuff ]
worker_set_flags(worker, WORKER_PREP, false);
(that 'false' means not to wake up an idle worker)
The wq_worker_sleeping() is called from schedule when a worker thread
is putting itself to sleep. Which happens most of the time outside
of that [ do work stuff ].
The wq_worker_waking_up is called by the wakeup worker code, which
is also callod outside that [ do work stuff ].
Thus, the likely and unlikely used by those two functions are actually
backwards.
Remove the annotation and let gcc figure it out.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
I found a trivial bug on initialization of workqueue.
Current init_workqueues doesn't check the result of
allocation of system_unbound_wq, this should be checked
like other queues.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Silly though it is, completions and wait_queue_heads use foo_ONSTACK
(COMPLETION_INITIALIZER_ONSTACK, DECLARE_COMPLETION_ONSTACK,
__WAIT_QUEUE_HEAD_INIT_ONSTACK and DECLARE_WAIT_QUEUE_HEAD_ONSTACK) so I
guess workqueues should do the same thing.
s/INIT_WORK_ON_STACK/INIT_WORK_ONSTACK/
s/INIT_DELAYED_WORK_ON_STACK/INIT_DELAYED_WORK_ONSTACK/
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the MN10300 arch, we occasionally see an assertion being tripped in
alloc_cwqs() at the following line:
/* just in case, make sure it's actually aligned */
---> BUG_ON(!IS_ALIGNED(wq->cpu_wq.v, align));
return wq->cpu_wq.v ? 0 : -ENOMEM;
The values are:
wa->cpu_wq.v => 0x902776e0
align => 0x100
and align is calculated by the following:
const size_t align = max_t(size_t, 1 << WORK_STRUCT_FLAG_BITS,
__alignof__(unsigned long long));
This is because the pointer in question (wq->cpu_wq.v) loses some of its
lower bits to control flags, and so the object it points to must be
sufficiently aligned to avoid the need to use those bits for pointing to
things.
Currently, 4 control bits and 4 colour bits are used in normal
circumstances, plus a debugging bit if debugging is set. This requires
the cpu_workqueue_struct struct to be at least 256 bytes aligned (or 512
bytes aligned with debugging).
PERCPU() alignment on MN13000, however, is only 32 bytes as set in
vmlinux.lds.S. So we set this to PAGE_SIZE (4096) to match most other
arches and stick a comment in alloc_cwqs() for anyone else who triggers
the assertion.
Reported-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a25909a4 (lockdep: Add an in_workqueue_context() lockdep-based
test function) added in_workqueue_context() but there hasn't been any
in-kernel user and the lockdep annotation in workqueue is scheduled to
change. Remove the unused function.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The documentation for schedule_on_each_cpu() states that it calls a
function on each online CPU from keventd. This can easily be
interpreted as an asyncronous call because the description does not
mention that flush_work is called. Clarify that it is synchronous.
tj: rephrased a bit
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add WQ_MEM_RECLAIM flag which currently maps to WQ_RESCUER, mark
WQ_RESCUER as internal and replace all external WQ_RESCUER usages to
WQ_MEM_RECLAIM.
This makes the API users express the intent of the workqueue instead
of indicating the internal mechanism used to guarantee forward
progress. This is also to make it cleaner to add more semantics to
WQ_MEM_RECLAIM. For example, if deemed necessary, memory reclaim
workqueues can be made highpri.
This patch doesn't introduce any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
The policy function keep_working() didn't check GCWQ_HIGHPRI_PENDING
and could return %false with highpri work pending. This could lead to
late execution of a highpri work which was delayed due to @max_active
throttling if other works are actively consuming CPU cycles.
For example, the following could happen.
1. Work W0 which burns CPU cycles.
2. Two works W1 and W2 are queued to a highpri wq w/ @max_active of 1.
3. W1 starts executing and W2 is put to delayed queue. W0 and W1 are
both runnable.
4. W1 finishes which puts W2 to pending queue but keep_working()
incorrectly returns %false and the worker goes to sleep.
5. W0 finishes and W2 starts execution.
With this patch applied, W2 starts execution as soon as W1 finishes.
Signed-off-by: Tejun Heo <tj@kernel.org>
These two tracepoints allow tracking when and how a work is queued and
activated. This patch is based on Frederic's patch to add queue_work
trace point.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Define workqueue_work event class and use it for workqueue_execute_end
trace point. Also, move trace/events/workqueue.h include downwards
such that all struct definitions are visible to it. This is to
prepare for more tracepoints and doesn't cause any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Implement flush[_delayed]_work_sync(). These are flush functions
which also make sure no CPU is still executing the target work from
earlier queueing instances. These are similar to
cancel[_delayed]_work_sync() except that the target work item is
flushed instead of cancelled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Factor out start_flush_work() from flush_work(). start_flush_work()
has @wait_executing argument which controls whether the barrier is
queued only if the work is pending or also if executing. As
flush_work() needs to wait for execution too, it uses %true.
This commit doesn't cause any behavior difference. start_flush_work()
will be used to implement flush_work_sync().
Signed-off-by: Tejun Heo <tj@kernel.org>
Make the following cleanup changes.
* Relocate flush/cancel function prototypes and definitions.
* Relocate wait_on_cpu_work() and wait_on_work() before
try_to_grab_pending(). These will be used to implement
flush_work_sync().
* Make all flush/cancel functions return bool instead of int.
* Update wait_on_cpu_work() and wait_on_work() to return %true if they
actually waited.
* Add / update comments.
This patch doesn't cause any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
alloc_mayday_mask() was using alloc_cpumask_var() making
gcwq->mayday_mask contain garbage after initialization on
CONFIG_CPUMASK_OFFSTACK=y configurations. This combined with the
previously fixed GCWQ_DISASSOCIATED initialization bug could make
rescuers fall into infinite loop trying to bind to an offline cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: CAI Qian <caiqian@redhat.com>
init_workqueues() incorrectly marks workqueues for all possible CPUs
associated. Combined with mayday_mask initialization bug, this can
make rescuers keep trying to bind to an offline gcwq indefinitely.
Fix init_workqueues() such that only online CPUs have their gcwqs have
GCWQ_DISASSOCIATED cleared.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: CAI Qian <caiqian@redhat.com>
cwq->nr_active is used to keep track of how many work items are active
for the cpu workqueue, where 'active' is defined as either pending on
global worklist or executing. This is used to implement the
max_active limit and workqueue freezing. If a work item is queued
after nr_active has already reached max_active, the work item doesn't
increment nr_active and is put on the delayed queue and gets activated
later as previous active work items retire.
try_to_grab_pending() which is used in the cancellation path
unconditionally decremented nr_active whether the work item being
cancelled is currently active or delayed, so cancelling a delayed work
item makes nr_active underflow. This breaks max_active enforcement
and triggers BUG_ON() in destroy_workqueue() later on.
This patch fixes this bug by adding a flag WORK_STRUCT_DELAYED, which
is set while a work item in on the delayed list and making
try_to_grab_pending() decrement nr_active iff the work item is
currently active.
The addition of the flag enlarges cwq alignment to 256 bytes which is
getting a bit too large. It's scheduled to be reduced back to 128
bytes by merging WORK_STRUCT_PENDING and WORK_STRUCT_CWQ in the next
devel cycle.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Now that the worklist is global, having works pending after wq
destruction can easily lead to oops and destroy_workqueue() have
several BUG_ON()s to catch these cases. Unfortunately, BUG_ON()
doesn't tell much about how the work became pending after the final
flush_workqueue().
This patch adds WQ_DYING which is set before the final flush begins.
If a work is requested to be queued on a dying workqueue,
WARN_ON_ONCE() is triggered and the request is ignored. This clearly
indicates which caller is trying to queue a work on a dying workqueue
and keeps the system working in most cases.
Locking rule comment is updated such that the 'I' rule includes
modifying the field from destruction path.
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_maybe_bind_and_lock() actually grabs gcwq->lock but was missing proper
annotation. Add it. So this patch will remove following sparse warnings:
kernel/workqueue.c:1214:13: warning: context imbalance in 'worker_maybe_bind_and_lock' - wrong count at exit
arch/x86/include/asm/irqflags.h:44:9: warning: context imbalance in 'worker_rebind_fn' - unexpected unlock
kernel/workqueue.c:1991:17: warning: context imbalance in 'rescuer_thread' - unexpected unlock
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some of internal functions called within gcwq->lock context releases and
regrabs the lock but were missing proper annotations. Add it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
With the introduction of the new unified work queue thread pools,
we lost one feature: It's no longer possible to know which worker
is causing the CPU to wake out of idle. The result is that PowerTOP
now reports a lot of "kworker/a:b" instead of more readable results.
This patch adds a pair of tracepoints to the new workqueue code,
similar in style to the timer/hrtimer tracepoints.
With this pair of tracepoints, the next PowerTOP can correctly
report which work item caused the wakeup (and how long it took):
Interrupt (43) i915 time 3.51ms wakeups 141
Work ieee80211_iface_work time 0.81ms wakeups 29
Work do_dbs_timer time 0.55ms wakeups 24
Process Xorg time 21.36ms wakeups 4
Timer sched_rt_period_timer time 0.01ms wakeups 1
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
wq->rescuer is not freed when wq is destroyed, leads a memory leak
then. This patch also remove a redundant line.
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Commit 6ee0578b (workqueue: mark init_workqueues as early_initcall)
made workqueue SMP initialization depend on workqueue_cpu_callback(),
which however was registered as hotcpu_notifier() and didn't get
called if CONFIG_HOTPLUG_CPU is not set. This made gcwqs on non-boot
CPUs not create their initial workers leading to boot failures. Fix
it by making it a cpu_notifier.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: walt <w41ter@gmail.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
works in schecule_on_each_cpu() is a percpu pointer but was missing
__percpu markup. Add it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
workqueue: mark init_workqueues() as early_initcall()
workqueue: explain for_each_*cwq_cpu() iterators
fscache: fix build on !CONFIG_SYSCTL
slow-work: kill it
gfs2: use workqueue instead of slow-work
drm: use workqueue instead of slow-work
cifs: use workqueue instead of slow-work
fscache: drop references to slow-work
fscache: convert operation to use workqueue instead of slow-work
fscache: convert object to use workqueue instead of slow-work
workqueue: fix how cpu number is stored in work->data
workqueue: fix mayday_mask handling on UP
workqueue: fix build problem on !CONFIG_SMP
workqueue: fix locking in retry path of maybe_create_worker()
async: use workqueue for worker pool
workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
workqueue: implement unbound workqueue
workqueue: prepare for WQ_UNBOUND implementation
libata: take advantage of cmwq and remove concurrency limitations
workqueue: fix worker management invocation without pending works
...
Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
Mark init_workqueues() as early_initcall() and thus it will be initialized
before smp bringup. init_workqueues() registers for the hotcpu notifier
and thus it should cope with the processors that are brought online after
the workqueues are initialized.
x86 smp bringup code uses workqueues and uses a workaround for the
cold boot process (as the workqueues are initialized post smp_init()).
Marking init_workqueues() as early_initcall() will pave the way for
cleaning up this code.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
for_each_*cwq_cpu() are similar to regular CPU iterators except that
it also considers the pseudo CPU number used for unbound workqueues.
Explain them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Once a work starts execution, its data contains the cpu number it was
on instead of pointing to cwq. This is added by commit 7a22ad75
(workqueue: carry cpu number in work data once execution starts) to
reliably determine the work was last on even if the workqueue itself
was destroyed inbetween.
Whether data points to a cwq or contains a cpu number was
distinguished by comparing the value against PAGE_OFFSET. The
assumption was that a cpu number should be below PAGE_OFFSET while a
pointer to cwq should be above it. However, on architectures which
use separate address spaces for user and kernel spaces, this doesn't
hold as PAGE_OFFSET is zero.
Fix it by using an explicit flag, WORK_STRUCT_CWQ, to mark what the
data field contains. If the flag is set, it's pointing to a cwq;
otherwise, it contains a cpu number.
Reported on s390 and microblaze during linux-next testing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Sachin Sant <sachinp@in.ibm.com>
Reported-by: Michal Simek <michal.simek@petalogix.com>
Reported-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: Michal Simek <monstr@monstr.eu>
All cpumasks are assumed to have cpu 0 permanently set on UP, so it
can't be used to signify whether there's something to be done for the
CPU. workqueue was using cpumask to track which CPU requested rescuer
assistance and this led rescuer thread to think there always are
pending mayday requests on UP, which resulted in infinite busy loops.
This patch fixes the problem by introducing mayday_mask_t and
associated helpers which wrap cpumask on SMP and emulates its behavior
using bitops and unsigned long on UP.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Commit f3421797 (workqueue: implement unbound workqueue) incorrectly
tested CONFIG_SMP as part of a C expression in alloc/free_cwqs(). As
CONFIG_SMP is not defined in UP, this breaks build. Fix it by using
Found during linux-next build test.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
maybe_create_worker() mismanaged locking when worker creation fails
and it has to retry. Fix locking and simplify lock manipulation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Yong Zhang <yong.zhang@windriver.com>
WQ_SINGLE_CPU combined with @max_active of 1 is used to achieve full
ordering among works queued to a workqueue. The same can be achieved
using WQ_UNBOUND as unbound workqueues always use the gcwq for
WORK_CPU_UNBOUND. As @max_active is always one and benefits from cpu
locality isn't accessible anyway, serving them with unbound workqueues
should be fine.
Drop WQ_SINGLE_CPU support and use WQ_UNBOUND instead. Note that most
single thread workqueue users will be converted to use multithread or
non-reentrant instead and only the ones which require strict ordering
will keep using WQ_UNBOUND + @max_active of 1.
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch implements unbound workqueue which can be specified with
WQ_UNBOUND flag on creation. An unbound workqueue has the following
properties.
* It uses a dedicated gcwq with a pseudo CPU number WORK_CPU_UNBOUND.
This gcwq is always online and disassociated.
* Workers are not bound to any CPU and not concurrency managed. Works
are dispatched to workers as soon as possible and the only applied
limitation is @max_active. IOW, all unbound workqeueues are
implicitly high priority.
Unbound workqueues can be used as simple execution context provider.
Contexts unbound to any cpu are served as soon as possible.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
In preparation of WQ_UNBOUND addition, make the following changes.
* Add WORK_CPU_* constants for pseudo cpu id numbers used (currently
only WORK_CPU_NONE) and use them instead of NR_CPUS. This is to
allow another pseudo cpu id for unbound cpu.
* Reorder WQ_* flags.
* Make workqueue_struct->cpu_wq a union which contains a percpu
pointer, regular pointer and an unsigned long value and use
kzalloc/kfree() in UP allocation path. This will be used to
implement unbound workqueues which will use only one cwq on SMPs.
* Move alloc_cwqs() allocation after initialization of wq fields, so
that alloc_cwqs() has access to wq->flags.
* Trivial relocation of wq local variables in freeze functions.
These changes don't cause any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
When there's no pending work to do, worker_thread() goes back to sleep
after waking up without checking whether worker management is
necessary. This means that idle worker exit requests can be ignored
if the gcwq stays empty.
Fix it by making worker_thread() always check whether worker
management is necessary before going to sleep.
Signed-off-by: Tejun Heo <tj@kernel.org>
get_work_gcwq() was incorrectly triggering BUG_ON() if cpu number is
equal to or higher than num_possible_cpus() instead of nr_cpu_ids.
Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
When one flusher is cascading to the next flusher, it first sets
wq->first_flusher to the next one and sets up the next flush cycle.
If there's nothing to do for the next cycle, it clears
wq->flush_flusher and proceeds to the one after that.
If the woken up flusher checks wq->first_flusher before it gets
cleared, it will incorrectly assume the role of the first flusher,
which triggers BUG_ON() sanity check.
Fix it by checking wq->first_flusher again after grabbing the mutex.
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_set/clr_flags() assume that if none of NOT_RUNNING flags is set
the worker must be contributing to nr_running which is only true if
the worker is actually running.
As when called from self, it is guaranteed that the worker is running,
those functions can be safely used from the worker itself and they
aren't necessary from other places anyway. Make the following changes
to fix the bug.
* Make worker_set/clr_flags() whine if not called from self.
* Convert all places which called those functions from other tasks to
manipulate flags directly.
* Make trustee_thread() directly clear nr_running after setting
WORKER_ROGUE on all workers. This is the only place where
nr_running manipulation is necessary outside of workers themselves.
* While at it, add sanity check for nr_running in worker_enter_idle().
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch implements cpu intensive workqueue which can be specified
with WQ_CPU_INTENSIVE flag on creation. Works queued to a cpu
intensive workqueue don't participate in concurrency management. IOW,
it doesn't contribute to gcwq->nr_running and thus doesn't delay
excution of other works.
Note that although cpu intensive works won't delay other works, they
can be delayed by other works. Combine with WQ_HIGHPRI to avoid being
delayed by other works too.
As the name suggests this is useful when using workqueue for cpu
intensive works. Workers executing cpu intensive works are not
considered for workqueue concurrency management and left for the
scheduler to manage.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
This patch implements high priority workqueue which can be specified
with WQ_HIGHPRI flag on creation. A high priority workqueue has the
following properties.
* A work queued to it is queued at the head of the worklist of the
respective gcwq after other highpri works, while normal works are
always appended at the end.
* As long as there are highpri works on gcwq->worklist,
[__]need_more_worker() remains %true and process_one_work() wakes up
another worker before it start executing a work.
The above two properties guarantee that works queued to high priority
workqueues are dispatched to workers and start execution as soon as
possible regardless of the state of other works.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Implement the following utility APIs.
workqueue_set_max_active() : adjust max_active of a wq
workqueue_congested() : test whether a wq is contested
work_cpu() : determine the last / current cpu of a work
work_busy() : query whether a work is busy
* Anton Blanchard fixed missing ret initialization in work_busy().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Anton Blanchard <anton@samba.org>
This patch makes changes to make new workqueue features available to
its users.
* Now that workqueue is more featureful, there should be a public
workqueue creation function which takes paramters to control them.
Rename __create_workqueue() to alloc_workqueue() and make 0
max_active mean WQ_DFL_ACTIVE. In the long run, all
create_workqueue_*() will be converted over to alloc_workqueue().
* To further unify access interface, rename keventd_wq to system_wq
and export it.
* Add system_long_wq and system_nrt_wq. The former is to host long
running works separately (so that flush_scheduled_work() dosen't
take so long) and the latter guarantees any queued work item is
never executed in parallel by multiple CPUs. These will be used by
future patches to update workqueue users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Define WQ_MAX_ACTIVE and create keventd with max_active set to half of
it which means that keventd now can process upto WQ_MAX_ACTIVE / 2 - 1
works concurrently. Unless some combination can result in dependency
loop longer than max_active, deadlock won't happen and thus it's
unnecessary to check whether current_is_keventd() before trying to
schedule a work. Kill current_is_keventd().
(Lockdep annotations are broken. We need lock_map_acquire_read_norecurse())
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Instead of creating a worker for each cwq and putting it into the
shared pool, manage per-cpu workers dynamically.
Works aren't supposed to be cpu cycle hogs and maintaining just enough
concurrency to prevent work processing from stalling due to lack of
processing context is optimal. gcwq keeps the number of concurrent
active workers to minimum but no less. As long as there's one or more
running workers on the cpu, no new worker is scheduled so that works
can be processed in batch as much as possible but when the last
running worker blocks, gcwq immediately schedules new worker so that
the cpu doesn't sit idle while there are works to be processed.
gcwq always keeps at least single idle worker around. When a new
worker is necessary and the worker is the last idle one, the worker
assumes the role of "manager" and manages the worker pool -
ie. creates another worker. Forward-progress is guaranteed by having
dedicated rescue workers for workqueues which may be necessary while
creating a new worker. When the manager is having problem creating a
new worker, mayday timer activates and rescue workers are summoned to
the cpu and execute works which might be necessary to create new
workers.
Trustee is expanded to serve the role of manager while a CPU is being
taken down and stays down. As no new works are supposed to be queued
on a dead cpu, it just needs to drain all the existing ones. Trustee
continues to try to create new workers and summon rescuers as long as
there are pending works. If the CPU is brought back up while the
trustee is still trying to drain the gcwq from the previous offlining,
the trustee will kill all idles ones and tell workers which are still
busy to rebind to the cpu, and pass control over to gcwq which assumes
the manager role as necessary.
Concurrency managed worker pool reduces the number of workers
drastically. Only workers which are necessary to keep the processing
going are created and kept. Also, it reduces cache footprint by
avoiding unnecessarily switching contexts between different workers.
Please note that this patch does not increase max_active of any
workqueue. All workqueues can still only process one work per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Implement worker_{set|clr}_flags() to manipulate worker flags. These
are currently simple wrappers but logics to track the current worker
state and the current level of concurrency will be added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Use gcwq->worklist instead of cwq->worklist and break the strict
association between a cwq and its worker. All works queued on a cpu
are queued on gcwq->worklist and processed by any available worker on
the gcwq.
As there no longer is strict association between a cwq and its worker,
whether a work is executing can now only be determined by calling
[__]find_worker_executing_work().
After this change, the only association between a cwq and its worker
is that a cwq puts a worker into shared worker pool on creation and
kills it on destruction. As all workqueues are still limited to
max_active of one, this means that there are always at least as many
workers as active works and thus there's no danger for deadlock.
The break of strong association between cwqs and workers requires
somewhat clumsy changes to current_is_keventd() and
destroy_workqueue(). Dynamic worker pool management will remove both
clumsy changes. current_is_keventd() won't be necessary at all as the
only reason it exists is to avoid queueing a work from a work which
will be allowed just fine. The clumsy part of destroy_workqueue() is
added because a worker can only be destroyed while idle and there's no
guarantee a worker is idle when its wq is going down. With dynamic
pool management, workers are not associated with workqueues at all and
only idle ones will be submitted to destroy_workqueue() so the code
won't be necessary anymore.
Signed-off-by: Tejun Heo <tj@kernel.org>
With gcwq managing all the workers and work->data pointing to the last
gcwq it was on, non-reentrance can be easily implemented by checking
whether the work is still running on the previous gcwq on queueing.
Implement it.
Signed-off-by: Tejun Heo <tj@kernel.org>
To implement non-reentrant workqueue, the last gcwq a work was
executed on must be reliably obtainable as long as the work structure
is valid even if the previous workqueue has been destroyed.
To achieve this, work->data will be overloaded to carry the last cpu
number once execution starts so that the previous gcwq can be located
reliably. This means that cwq can't be obtained from work after
execution starts but only gcwq.
Implement set_work_{cwq|cpu}(), get_work_[g]cwq() and
clear_work_data() to set work data to the cpu number when starting
execution, access the overloaded work data and clear it after
cancellation.
queue_delayed_work_on() is updated to preserve the last cpu while
in-flight in timer and other callers which depended on getting cwq
from work after execution starts are converted to depend on gcwq
instead.
* Anton Blanchard fixed compile error on powerpc due to missing
linux/threads.h include.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Anton Blanchard <anton@samba.org>
Now that all the workers are tracked by gcwq, we can find which worker
is executing a work from gcwq. Implement find_worker_executing_work()
and make worker track its current_cwq so that we can find things the
other way around. This will be used to implement non-reentrant wqs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reimplement st (single thread) workqueue so that it's friendly to
shared worker pool. It was originally implemented by confining st
workqueues to use cwq of a fixed cpu and always having a worker for
the cpu. This implementation isn't very friendly to shared worker
pool and suboptimal in that it ends up crossing cpu boundaries often.
Reimplement st workqueue using dynamic single cpu binding and
cwq->limit. WQ_SINGLE_THREAD is replaced with WQ_SINGLE_CPU. In a
single cpu workqueue, at most single cwq is bound to the wq at any
given time. Arbitration is done using atomic accesses to
wq->single_cpu when queueing a work. Once bound, the binding stays
till the workqueue is drained.
Note that the binding is never broken while a workqueue is frozen.
This is because idle cwqs may have works waiting in delayed_works
queue while frozen. On thaw, the cwq is restarted if there are any
delayed works or unbound otherwise.
When combined with max_active limit of 1, single cpu workqueue has
exactly the same execution properties as the original single thread
workqueue while allowing sharing of per-cpu workers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reimplement CPU hotplugging support using trustee thread. On CPU
down, a trustee thread is created and each step of CPU down is
executed by the trustee and workqueue_cpu_callback() simply drives and
waits for trustee state transitions.
CPU down operation no longer waits for works to be drained but trustee
sticks around till all pending works have been completed. If CPU is
brought back up while works are still draining,
workqueue_cpu_callback() tells trustee to step down and tell workers
to rebind to the cpu.
As it's difficult to tell whether cwqs are empty if it's freezing or
frozen, trustee doesn't consider draining to be complete while a gcwq
is freezing or frozen (tracked by new GCWQ_FREEZING flag). Also,
workers which get unbound from their cpu are marked with WORKER_ROGUE.
Trustee based implementation doesn't bring any new feature at this
point but it will be used to manage worker pool when dynamic shared
worker pool is implemented.
Signed-off-by: Tejun Heo <tj@kernel.org>
Implement worker states. After created, a worker is STARTED. While a
worker isn't processing a work, it's IDLE and chained on
gcwq->idle_list. While processing a work, a worker is BUSY and
chained on gcwq->busy_hash. Also, gcwq now counts the number of all
workers and idle ones.
worker_thread() is restructured to reflect state transitions.
cwq->more_work is removed and waking up a worker makes it check for
events. A worker is killed by setting DIE flag while it's IDLE and
waking it up.
This gives gcwq better visibility of what's going on and allows it to
find out whether a work is executing quickly which is necessary to
have multiple workers processing the same cwq.
Signed-off-by: Tejun Heo <tj@kernel.org>
There is one gcwq (global cwq) per each cpu and all cwqs on an cpu
point to it. A gcwq contains a lock to be used by all cwqs on the cpu
and an ida to give IDs to workers belonging to the cpu.
This patch introduces gcwq, moves worker_ida into gcwq and make all
cwqs on the same cpu use the cpu's gcwq->lock instead of separate
locks. gcwq->ida is now protected by gcwq->lock too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, workqueue freezing is implemented by marking the worker
freezeable and calling try_to_freeze() from dispatch loop.
Reimplement it using cwq->limit so that the workqueue is frozen
instead of the worker.
* workqueue_struct->saved_max_active is added which stores the
specified max_active on initialization.
* On freeze, all cwq->max_active's are quenched to zero. Freezing is
complete when nr_active on all cwqs reach zero.
* On thaw, all cwq->max_active's are restored to wq->saved_max_active
and the worklist is repopulated.
This new implementation allows having single shared pool of workers
per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Add cwq->nr_active, cwq->max_active and cwq->delayed_work. nr_active
counts the number of active works per cwq. A work is active if it's
flushable (colored) and is on cwq's worklist. If nr_active reaches
max_active, new works are queued on cwq->delayed_work and activated
later as works on the cwq complete and decrement nr_active.
cwq->max_active can be specified via the new @max_active parameter to
__create_workqueue() and is set to 1 for all workqueues for now. As
each cwq has only single worker now, this double queueing doesn't
cause any behavior difference visible to its users.
This will be used to reimplement freeze/thaw and implement shared
worker pool.
Signed-off-by: Tejun Heo <tj@kernel.org>
A work is linked to the next one by having WORK_STRUCT_LINKED bit set
and these links can be chained. When a linked work is dispatched to a
worker, all linked works are dispatched to the worker's newly added
->scheduled queue and processed back-to-back.
Currently, as there's only single worker per cwq, having linked works
doesn't make any visible behavior difference. This change is to
prepare for multiple shared workers per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Separate out worker thread related information to struct worker from
struct cpu_workqueue_struct and implement helper functions to deal
with the new struct worker. The only change which is visible outside
is that now workqueue worker are all named "kworker/CPUID:WORKERID"
where WORKERID is allocated from per-cpu ida.
This is in preparation of concurrency managed workqueue where shared
multiple workers would be available per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reimplement workqueue flushing using color coded works. wq has the
current work color which is painted on the works being issued via
cwqs. Flushing a workqueue is achieved by advancing the current work
colors of cwqs and waiting for all the works which have any of the
previous colors to drain.
Currently there are 16 possible colors, one is reserved for no color
and 15 colors are useable allowing 14 concurrent flushes. When color
space gets full, flush attempts are batched up and processed together
when color frees up, so even with many concurrent flushers, the new
implementation won't build up huge queue of flushers which has to be
processed one after another.
Only works which are queued via __queue_work() are colored. Works
which are directly put on queue using insert_work() use NO_COLOR and
don't participate in workqueue flushing. Currently only works used
for work-specific flush fall in this category.
This new implementation leaves only cleanup_workqueue_thread() as the
user of flush_cpu_workqueue(). Just make its users use
flush_workqueue() and kthread_stop() directly and kill
cleanup_workqueue_thread(). As workqueue flushing doesn't use barrier
request anymore, the comment describing the complex synchronization
around it in cleanup_workqueue_thread() is removed together with the
function.
This new implementation is to allow having and sharing multiple
workers per cpu.
Please note that one more bit is reserved for a future work flag by
this patch. This is to avoid shifting bits and updating comments
later.
Signed-off-by: Tejun Heo <tj@kernel.org>
work->data field is used for two purposes. It points to cwq it's
queued on and the lower bits are used for flags. Currently, two bits
are reserved which is always safe as 4 byte alignment is guaranteed on
every architecture. However, future changes will need more flag bits.
On SMP, the percpu allocator is capable of honoring larger alignment
(there are other users which depend on it) and larger alignment works
just fine. On UP, percpu allocator is a thin wrapper around
kzalloc/kfree() and don't honor alignment request.
This patch introduces WORK_STRUCT_FLAG_BITS and implements
alloc/free_cwqs() which guarantees max(1 << WORK_STRUCT_FLAG_BITS,
__alignof__(unsigned long long) alignment both on SMP and UP. On SMP,
simply wrapping percpu allocator is enough. On UP, extra space is
allocated so that cwq can be aligned and the original pointer can be
stored after it which is used in the free path.
* Alignment problem on UP is reported by Michal Simek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: Michal Simek <michal.simek@petalogix.com>
Worker management is about to be overhauled. Simplify things by
removing cpu_populated_map, creating workers for all possible cpus and
making single threaded workqueues behave more like multi threaded
ones.
After this patch, all cwqs are always initialized, all workqueues are
linked on the workqueues list and workers for all possibles cpus
always exist. This also makes CPU hotplug support simpler - checking
->cpus_allowed before processing works in worker_thread() and flushing
cwqs on CPU_POST_DEAD are enough.
While at it, make get_cwq() always return the cwq for the specified
cpu, add target_cwq() for cases where single thread distinction is
necessary and drop all direct usage of per_cpu_ptr() on wq->cpu_wq.
Signed-off-by: Tejun Heo <tj@kernel.org>
Strip tracing code from workqueue and remove workqueue tracing. This
is temporary measure till concurrency managed workqueue is complete.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Work flags are about to see more traditional mask handling. Define
WORK_STRUCT_*_BIT as the bit position constant and redefine
WORK_STRUCT_* as bit masks. Also, make WORK_STRUCT_STATIC_* flags
conditional
While at it, re-define these constants as enums and use
WORK_STRUCT_STATIC instead of hard-coding 2 in
WORK_DATA_STATIC_INIT().
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, __create_workqueue_key() takes @singlethread and
@freezeable paramters and store them separately in workqueue_struct.
Merge them into a single flags parameter and field and use
WQ_FREEZEABLE and WQ_SINGLE_THREAD.
Signed-off-by: Tejun Heo <tj@kernel.org>
Make the following updates in preparation of concurrency managed
workqueue. None of these changes causes any visible behavior
difference.
* Add comments and adjust indentations to data structures and several
functions.
* Rename wq_per_cpu() to get_cwq() and swap the position of two
parameters for consistency. Convert a direct per_cpu_ptr() access
to wq->cpu_wq to get_cwq().
* Add work_static() and Update set_wq_data() such that it sets the
flags part to WORK_STRUCT_PENDING | WORK_STRUCT_STATIC if static |
@extra_flags.
* Move santiy check on work->entry emptiness from queue_work_on() to
__queue_work() which all queueing paths share.
* Make __queue_work() take @cpu and @wq instead of @cwq.
* Restructure flush_work() and __create_workqueue_key() to make them
easier to modify.
Signed-off-by: Tejun Heo <tj@kernel.org>
With stop_machine() converted to use cpu_stop, RT workqueue doesn't
have any user left. Kill RT workqueue support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Some recent uses of RCU make use of workqueues. In these uses, execution
within the context of a specific workqueue takes the place of the usual
RCU read-side primitives such as rcu_read_lock(), and flushing of workqueues
takes the place of the usual RCU grace-period primitives. Checking for
correct use of rcu_dereference() in such cases requires a test of whether
the code is executing in the context of a particular workqueue. This
commit adds an in_workqueue_context() function that provides this test.
This new function is only defined when lockdep is enabled, which allows
it to be used as the second argument of rcu_dereference_check().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
By the previous modification, the cpu notifier can return encapsulate
errno value. This converts the cpu notifiers for kernel/*.c
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In short: change cancel_work_sync(work) to mark this work as "never
queued" upon return.
When cancel_work_sync(work) succeeds, we know that this work can't be
queued or running, and since we own WORK_STRUCT_PENDING nobody can change
the bits in work->data under us. This means we can also clear the "cwq"
part along with _PENDING bit lockless before return, unless the work is
queued nobody can assume get_wq_data() is stable even under cwq->lock.
This change can speedup the subsequent cancel/flush requests, and as
Dmitry pointed out this simplifies the usage of work_struct's which
can be queued on different workqueues. Consider this pseudo code from
the input subsystem:
struct workqueue_struct *WQ;
struct work_struct *WORK;
for (;;) {
WQ = create_workqueue();
...
if (condition())
queue_work(WQ, WORK);
...
cancel_work_sync(WORK);
destroy_workqueue(WQ);
}
If condition() returns T and then F, cancel_work_sync() will crash the
kernel because WORK->data still points to the already destroyed workqueue.
With this patch the code like above becomes correct.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch (as1319) adds kerneldoc and a pointed warning to
flush_scheduled_work().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Tejun Heo <tj@kernel.org>
flush_delayed_work() always uses keventd_wq for re-queueing,
but it should use the workqueue this dwork was queued on.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 65a6446434 ("HWPOISON: Allow
schedule_on_each_cpu() from keventd") which allows schedule_on_each_cpu()
to be called from keventd added a race condition. schedule_on_each_cpu()
may race with cpu hotplug and end up executing the function twice on a
cpu.
Fix it by moving direct execution into the section protected with
get/put_online_cpus(). While at it, update code such that direct
execution is done after works have been scheduled for all other cpus and
drop unnecessary cpu != orig test from flush loop.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add debugobject support to track the life time of work_structs.
While at it, remove duplicate definition of
INIT_DELAYED_WORK_ON_STACK().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
* 'hwpoison-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6:
HWPOISON: fix invalid page count in printk output
HWPOISON: Allow schedule_on_each_cpu() from keventd
HWPOISON: fix/proc/meminfo alignment
HWPOISON: fix oops on ksm pages
HWPOISON: Fix page count leak in hwpoison late kill in do_swap_page
HWPOISON: return early on non-LRU pages
HWPOISON: Add brief hwpoison description to Documentation
HWPOISON: Clean up PR_MCE_KILL interface
Right now when calling schedule_on_each_cpu() from keventd there
is a deadlock because it tries to schedule a work item on the current CPU
too. This happens via lru_add_drain_all() in hwpoison.
Just call the function for the current CPU in this case. This is actually
faster too.
Debugging with Fengguang Wu & Max Asbock
Signed-off-by: Andi Kleen <ak@linux.intel.com>
It basically turns a delayed work into an immediate work, and then waits
for it to finish, thus allowing you to force (and wait for) an immediate
flush of a delayed work.
We'll want to use this in the tty layer to clean up tty_flush_to_ldisc().
Acked-by: Oleg Nesterov <oleg@redhat.com>
[ Fixed to use 'del_timer_sync()' as noted by Oleg ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (64 commits)
sched: Fix sched::sched_stat_wait tracepoint field
sched: Disable NEW_FAIR_SLEEPERS for now
sched: Keep kthreads at default priority
sched: Re-tune the scheduler latency defaults to decrease worst-case latencies
sched: Turn off child_runs_first
sched: Ensure that a child can't gain time over it's parent after fork()
sched: enable SD_WAKE_IDLE
sched: Deal with low-load in wake_affine()
sched: Remove short cut from select_task_rq_fair()
sched: Turn on SD_BALANCE_NEWIDLE
sched: Clean up topology.h
sched: Fix dynamic power-balancing crash
sched: Remove reciprocal for cpu_power
sched: Try to deal with low capacity, fix update_sd_power_savings_stats()
sched: Try to deal with low capacity
sched: Scale down cpu_power due to RT tasks
sched: Implement dynamic cpu_power
sched: Add smt_gain
sched: Update the cpu_power sum during load-balance
sched: Add SD_PREFER_SIBLING
...
Two important aspects of the schedule_work() function are not
yet documented:
- that it is allowed to pass a struct work_struct * to this
function that is already on the kernel-global workqueue;
- the meaning of its return value.
The patch below documents both aspects.
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
Cc: "Greg Kroah-Hartman" <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <200907301900.54202.bart.vanassche@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
v3: zhaolei@cn.fujitsu.com: Change TRACE_EVENT definition to new format
introduced by Steven Rostedt: consolidate trace and trace_event headers
v2: kosaki@jp.fujitsu.com: print the function names instead of addr, and zap
the work addr
v1: zhaolei@cn.fujitsu.com: Make workqueue tracepoints use TRACE_EVENT macro
TRACE_EVENT is a more generic way to define tracepoints.
Doing so adds these new capabilities to the tracepoints:
- zero-copy and per-cpu splice() tracing
- binary tracing without printf overhead
- structured logging records exposed under /debug/tracing/events
- trace events embedded in function tracer output and other plugins
- user-defined, per tracepoint filter expressions
Then, this patch converts DEFINE_TRACE to TRACE_EVENT in workqueue related
tracepoints.
[ Impact: expand workqueue tracer to events tracing ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tejun Heo
Lai Jiangshan
Sasha Levin
Konstantin Khlebnikov
Linus Torvalds
Joonsoo Kim
Mike Galbraith
Dan Magenheimer
Valentin Ilie
Peter Zijlstra
Stephen Boyd
Dan Carpenter
Alan Stern
Paul Gortmaker
Thomas Tuttle
Eric Dumazet
Stanislaw Gruszka
Steven Rostedt
Hitoshi Mitake
Andrew Morton
David Howells
Namhyung Kim
Arjan van de Ven
Xiaotian Feng
Suresh Siddha
Paul E. McKenney
Akinobu Mita
Oleg Nesterov
Thomas Gleixner
Andi Kleen
Mike Galbraith
Bart Van Assche
Zhaolei