Граф коммитов

177920 Коммитов

Автор SHA1 Сообщение Дата
Catalin Marinas 2687275a58 arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required
mem_init() currently relies on knowing the boundaries of the crashkernel
reservation to map such region with page granularity for later
unmapping via set_memory_valid(..., 0). If the crashkernel reservation
is deferred, such boundaries are not known when the linear mapping is
created. Simply parse the command line for "crashkernel" and, if found,
create the linear map with NO_BLOCK_MAPPINGS.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: James Morse <james.morse@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20201119175556.18681-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-11-20 09:32:46 +00:00
Catalin Marinas 791ab8b2e3 arm64: Ignore any DMA offsets in the max_zone_phys() calculation
Currently, the kernel assumes that if RAM starts above 32-bit (or
zone_bits), there is still a ZONE_DMA/DMA32 at the bottom of the RAM and
such constrained devices have a hardwired DMA offset. In practice, we
haven't noticed any such hardware so let's assume that we can expand
ZONE_DMA32 to the available memory if no RAM below 4GB. Similarly,
ZONE_DMA is expanded to the 4GB limit if no RAM addressable by
zone_bits.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20201118185809.1078362-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-11-19 17:58:55 +00:00
Linus Torvalds 40be821d62 A set of x86 fixes:
- Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a
    combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs
    integrated assembler upset.
 
  - Correct the mitigation selection logic which prevented the related prctl
    to work correctly.
 
  - Make the UV5 hubless system work correctly by fixing up the malformed
    table entries and adding the missing ones.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+oDNYTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoaN0EACPWY15k1YuAEIjiQxRBhq22J8Y6wNX
 Ui/rF2AZcAnNEJDTIyvjP6COnT9mjX/tuuluMaI6i/XY/9Xp5LpKvivkL2PXNN3X
 onW01ouIc1iYxXwQEVZvhYHsOyhkR9Z8yNG/q9I7xYAXNSZcAHwXVar4VlPBT7Ay
 iP75i8pGmb/NCc4oHNXuBp/dV/0/dCoLTndb5p5pX8oS60AAt9ZuK3IRc3ucayhI
 M4rTTEya1oY+ZNbtP4A4Jp7Qc/NGYDo6q04za+jcxZ5Gqacs+fk/PNuWgL1fZZtW
 sn1D+SMWEb55Xcsdy976b29FFU/DcOcf7TRASzyKgyPW5jg1dP6BZ6U0wpVV3KZw
 S2h5/pt48JZI7olrDsLQ0tzjALlk2CcFNrnRtOMDduHdw9wyz+Sg58lZYuvH3sXK
 5ZblWRJ3JiBNsNO0sA3kd4sp7xWQB3ey6mkYD8Vqb7zRIt8aXT9jqBxhDrP+Vqs/
 /UKv+BJfD6WxC0nQ4x6MS3g4sDvI+1SLfHSZ/UjWJ6NfYJW5/w429pFCaF73xCTd
 cqxja1dZYixn7ioFZjolMUdvuDiC5B2+5+RzEV87kaDzO9QZQyvsl7G74MSfwx6G
 DAydvuyJoxP2qVASobOBcVOzLQO7DsLzFZzJTttZcnkK2iprcz4qrsFLMxF9SxTD
 Amb8qck60dLfqA==
 =JdPk
 -----END PGP SIGNATURE-----

Merge tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a
     combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs
     integrated assembler upset

   - Correct the mitigation selection logic which prevented the related
     prctl to work correctly

   - Make the UV5 hubless system work correctly by fixing up the
     malformed table entries and adding the missing ones"

* tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Recognize UV5 hubless system identifier
  x86/platform/uv: Remove spaces from OEM IDs
  x86/platform/uv: Fix missing OEM_TABLE_ID
  x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP
  x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S
2020-11-08 10:09:36 -08:00
Linus Torvalds e942d75281 powerpc fixes for 5.10 #3
Fix miscompilation with GCC 4.9 by using asm_goto_volatile for put_user().
 
 A fix for an RCU splat at boot caused by a recent lockdep change.
 
 A fix for a possible deadlock in our EEH debugfs code.
 
 Several fixes for handling of _PAGE_ACCESSED on 32-bit platforms.
 
 A build fix when CONFIG_NUMA=n.
 
 Thanks to:
   Andreas Schwab,
   Christophe Leroy,
   Oliver O'Halloran,
   Qian Cai,
   Scott Cheloha.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl+nxNcTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgEWMD/0SVRMNlv5K4QYi38GPQMR/fZ20uyf6
 oLlGNwrXxdYfZEQGvjJ4XiNVEVHmj+nylVyqmI3HnjLRpjmfLopZE5HuIHMknszw
 VaYZ/MwnbHcnIt8q/3xM56zpk2zJo9kK1FEItmupbWIbQirJyeE1CEpVI1LXn9FR
 2hNSpSk6hhwI/xrT6L1exIReP0CFlsZCMCgNbP9vEDPqOorx3Wxf1uqznV9uZWaZ
 AzQwevh2OvYd/rcsDLMlisRWv+JJTBJp/CyvKvawow9Akh81dpic26FqPPVLZkkT
 maxY2uGLEyI/qpYFor7Fz1LanMbu3SnXT483Cu3jSv5wzL+2YcdmGsb0IMgqaFlQ
 os8waD9q3KDeohCqgqcEYdnkNUo3TQjFP8ilZYYQXQZVBlsWuHkv5k59Bc03aa1w
 OAAXvmv+SlhNuCDRZI0qQQbSFlIMIGaUo+RsUZ7WkXBnYE4SCmfykVvP8uB2Djsf
 98F4dpfWGPDF4n+wothUBycjJa3NG3Ceset04r94KAMfp0SR73xYHHIRSR1Xa6Pj
 1s8EQ0MNMgVb1UdJ3eJCRpfO6oU1p+V7cnVhYH9rTSKBGAoHAwnCh/Py6JPBMcea
 8ydNkApKODdZ5d6/oHa4i5oXJTik34f5p3nrBNOWQlA/dCrQeZX7YbYlhCUi0/4U
 OCI4V3sEs+dIaQ==
 =IFi+
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - fix miscompilation with GCC 4.9 by using asm_goto_volatile for put_user()

 - fix for an RCU splat at boot caused by a recent lockdep change

 - fix for a possible deadlock in our EEH debugfs code

 - several fixes for handling of _PAGE_ACCESSED on 32-bit platforms

 - build fix when CONFIG_NUMA=n

Thanks to Andreas Schwab, Christophe Leroy, Oliver O'Halloran, Qian Cai,
and Scott Cheloha.

* tag 'powerpc-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/numa: Fix build when CONFIG_NUMA=n
  powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry
  powerpc/8xx: Always fault when _PAGE_ACCESSED is not set
  powerpc/40x: Always fault when _PAGE_ACCESSED is not set
  powerpc/603: Always fault when _PAGE_ACCESSED is not set
  powerpc: Use asm_goto_volatile for put_user()
  powerpc/smp: Call rcu_cpu_starting() earlier
  powerpc/eeh_cache: Fix a possible debugfs deadlock
2020-11-08 09:37:20 -08:00
Linus Torvalds 4b1d362db9 RISC-V Fixes for 5.10-rc3
* An SPDX comment style fix.
 * A fix to ignore memory that is unusable.
 * A fix to avoid setting a kernel text offset for the !MMU kernels, where
   skipping the first page of memory is both unnecessary and costly.
 * A fix to avoid passing the flag bits in satp to pfn_to_virt().
 * A fix to __put_kernel_nofault, where we had the arguments to
   __put_user_nocheck reversed.
 * A workaround for a bug in the FU540 to avoid triggering PMP issues during
   early boot.
 * A change to how we pull symbols out of the vDSO.  The old mechanism was
   removed from binutils-2.35 (and has been backported to Debian's 2.34).
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl+mTYMTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYicfIEACUOSbfrGDQGjXXjp7uy2q/t3B6MLFd
 lfoT6jsoDEd5S56xz2GVRuf4usK/spZQTNCRRFC6y0mEA6t/b17WRHrgKgce6M+D
 JIvg0p5aGKihU+wSEBWINUwmjRAzSmM4wnAdOLSGMYGmgb2XdsMm5XAG+ejpxlRc
 23gfF3H50cDQKbvbHpEpIOH3sk81TMYl+YO+U4f1xz0jC6j21Fxui03xSn0NSJkQ
 eci3awi5PSqhS1rlWgObMactomZtfDs1vfwUt4x5XIoPqzqWLvifigvpmXgXcK2u
 38BpOf4EAe5qjLmQ3C8zfxqMLUoU0zG3j9LgEcZOtkyLONeYAzN56Jy/o8+u2bN8
 3BX6LMkIdpb2KQowgeP4q//zaPS/uxMueaLkyqtUKqkdl2VDeB0VuASr/k6zZVbI
 0aEKJAPvuSMtdpr0mrFE6m3WWIP2qzHT6pXkbv20yWrLkf/18DudjnNkPzgGooVW
 sMkXZDe1TRbMlf7/xwIrIgl+iDfzNLUUEL2i+1VAoloNI5InI9e9n2et6KxEdhXb
 8K7qemUwtyBxlYX1pgfittltj5t2SBCKVuCxuJJCt1SYiIqljEAKYTjTIKINrzzz
 QIDpTcEN17hgHnjEprae6dBfpD/Sn7YdYx35zmgN+9ynpPLClbNFbYZyl/4kP0aD
 5f793CVJErfRVQ==
 =TT6+
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - SPDX comment style fix

 - ignore memory that is unusable

 - avoid setting a kernel text offset for the !MMU kernels, where
   skipping the first page of memory is both unnecessary and costly

 - avoid passing the flag bits in satp to pfn_to_virt()

 - fix __put_kernel_nofault, where we had the arguments to
   __put_user_nocheck reversed

 - workaround for a bug in the FU540 to avoid triggering PMP issues
   during early boot

 - change to how we pull symbols out of the vDSO. The old mechanism was
   removed from binutils-2.35 (and has been backported to Debian's 2.34)

* tag 'riscv-for-linus-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Fix the VDSO symbol generaton for binutils-2.35+
  RISC-V: Use non-PGD mappings for early DTB access
  riscv: uaccess: fix __put_kernel_nofault()
  riscv: fix pfn_to_virt err in do_page_fault().
  riscv: Set text_offset correctly for M-Mode
  RISC-V: Remove any memblock representing unusable memory area
  risc-v: kernel: ftrace: Fixes improper SPDX comment style
2020-11-07 11:16:37 -08:00
Mike Travis 801284f973 x86/platform/uv: Recognize UV5 hubless system identifier
Testing shows a problem in that UV5 hubless systems were not being
recognized.  Add them to the list of OEM IDs checked.

Fixes: 6c7794423a ("Add UV5 direct references")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-4-mike.travis@hpe.com
2020-11-07 11:17:39 +01:00
Mike Travis 1aee505e01 x86/platform/uv: Remove spaces from OEM IDs
Testing shows that trailing spaces caused problems with the OEM_ID and
the OEM_TABLE_ID.  One being that the OEM_ID would not string compare
correctly.  Another the OEM_ID and OEM_TABLE_ID would be concatenated
in the printout.  Remove any trailing spaces.

Fixes: 1e61f5a95f ("Add and decode Arch Type in UVsystab")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-3-mike.travis@hpe.com
2020-11-07 11:17:39 +01:00
Mike Travis 1aec69ae56 x86/platform/uv: Fix missing OEM_TABLE_ID
Testing shows a problem in that the OEM_TABLE_ID was missing for
hubless systems.  This is used to determine the APIC type (legacy or
extended).  Add the OEM_TABLE_ID to the early hubless processing.

Fixes: 1e61f5a95f ("Add and decode Arch Type in UVsystab")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-2-mike.travis@hpe.com
2020-11-07 11:17:39 +01:00
Linus Torvalds 30f3f68e27 arm64 fixes for -rc3
- Fix early use of kprobes
 
 - Fix kernel placement in kexec_file_load()
 
 - Bump maximum number of NUMA nodes
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+lLeQQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNHgjB/9RJMWwEo6TJ0JyJdBmgEy9k+F5k7zUEtNO
 dmZBXt1V8Gvw2MLRKAayWLumoJCUf0ZTICJ9+wnYAKkGtKvDfuEofrEOe/W/jB8m
 V2Nm7Y+UWL/D0E5+jdyGIqsPiljaZg8GCyOxN6BDuqgl/T8/3YlpSudMvlr7xm8s
 F71k2u2EvSybcRFmtp9A5x0eUeWRSQtLa1+fWmpyAPAX64YJ9bh2w3/g5SecocUK
 Ra8H91XO5BT2sHsDDQe67iUfZz9Y1N1UbNiuzCZIL7+xTcQ6DKw4JJ/2Z5BfkH0D
 04THZZqYt5AjYQmUULMmPcbSzMp4E30s5dmckevq8E+LG0imLDYp
 =w7Ip
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "Here's the weekly batch of fixes for arm64. Not an awful lot here, but
  there are still a few unresolved issues relating to CPU hotplug, RCU
  and IRQ tracing that I hope to queue fixes for next week.

  Summary:

   - Fix early use of kprobes

   - Fix kernel placement in kexec_file_load()

   - Bump maximum number of NUMA nodes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kexec_file: try more regions if loading segments fails
  arm64: kprobes: Use BRK instead of single-step when executing instructions out-of-line
  arm64: NUMA: Kconfig: Increase NODES_SHIFT to 4
2020-11-06 12:42:49 -08:00
Linus Torvalds 4257087e8f ARC fixes for 5.10-rc3
- Unbork HSDKv1 platform (won't boot) due to memory map issue
 
  - Prevent stack unwinder from infinite looping
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEOXpuCuR6hedrdLCJadfx3eKKwl4FAl+kalAACgkQadfx3eKK
 wl7J0A//RC5YkvL+ERYG8S/N+tM+YetiHlMzFy5+/cZLUQqepcqvd105fQHH3rGu
 eGEWIlL5ez7kLisbrxMog3OnuFN8hGIlsU+9GzgxCGgFIxPXnRzkPo77fKgIG6zs
 9N5QDLoqhHNCNYuhYJtsPTK8gUwUwZMFcZYQ2NpMIxsxvr8CDz3YLDncZRieNpf8
 NAMNIARi41kuwe2x0svIv3PE4i6Wulz031UIC2F1wW+XlF21uBi7tmnkGgZs0ocF
 M7z3aqXRryjpZYiUtNLFqVU7uNvix08jKTUKJVycthEIuIQQN0hwN9VEwiaCoH6y
 j+DGzghtXH6gBeWX1pNz+kk4fFAT6FCP5gKHwzWSPlJvt4c+iA22MUOIumS5+fgY
 tFfmMTn3+9GAhGOOhFDx2GjyVaXONzh3mqQHQefGZSX11UDM1BNHqHudmowN54oQ
 Vur3Mpwob8xoCa4Zyexw2gLf9bpt3T5q2Fbdarxyqg/wAWNhF0I9xx99obpk1ELb
 ZnKXXRvYgilXqGIWeBFOs+mFR3d7tyh/r7PwFXrk+RO4wPWSSY6ZSBH7UM+Pcqhb
 UhrKzuZlI2wiZkQp+3rFPzw1cJndVpX7vRn0LHWY5CsI4DIYJvmLcJAcu8bwktnU
 s4no3zxk/iNEKNaZaBfsmZZLoIBptxdDQPddyZKQMVwCMD4cUYk=
 =Sgx8
 -----END PGP SIGNATURE-----

Merge tag 'arc-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

 - Unbork HSDKv1 platform (won't boot) due to memory map issue

 - Prevent stack unwinder from infinite looping

* tag 'arc-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk] Remap CCMs super early in asm boot trampoline
  ARC: stack unwinding: avoid indefinite looping
2020-11-06 12:29:08 -08:00
Linus Torvalds ee51814888 - fix reference counting for ap devices
- fix paes selftest
 
 - fix pmd_deref()/pud_deref() so they can also handle large pages
 
 - remove unused vdso file and defines
 
 - update defconfigs
 
 - call rcu_cpu_starting() early in smp init code to avoid lockdep warnings
 
 - fix hotplug of PCI function missing bus
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAl+kWR8ACgkQIg7DeRsp
 bsIauA//QVZfg+1c1qEArd3MiFebG4wDg/URNmxv+0acS0/gaJtTLcSQaojCpweX
 Nx62vs2KZhxXnQd+FlGEVUvTSz68+Uy5fh09ghBg1QlsLvdF9ZVI0R2gm5JvDQb1
 V9fnrF6aKbzin8ed7EsiuFMcP88ZgdFn1Tl4ZwHezAoIilluNtogsq6qxmy9C05l
 1MR4Hco4h2VptyFbjs/uSGimlrJbYEy9puqyRhBEvPrS/4vxjPu5z505xLRIcoNG
 Vg6Z+mBkTnXgDJq2SKaaUKkKH4qicux1it7SkwKG0rJjbP0c5gHv/9kX1cnM1Q9Q
 d/S4VdKHdr/Iwnnr4ga7IoeovFThx8dhvvaXPRhm8g0jMxeEDA0deTfKZOFUZw9j
 dkf5CZ4Mx9YUHClfqcCf0iHhyKE9vEQAEvi1sQR5lUfGI716mGB6RSZB/p9q78nL
 Ggpb6fUe3ZXew8lXPu68Om/tF9t9tKUtcFoLiAP9DSplxaYru61WmK7H43uw0bhC
 zzDpF5uXqtvFRZilh5atTnmBtISlHOTtJP0ivUOqj2Cwlj34nDZBHTWIBylAfd3Y
 IIPHxWuCcXSvwbXpRgZ4xoZolSEO+4CRGHDWeAkH6mFl3gPECSf385oz4yW8O3Rl
 vdMgw55AIh6DLyDt6YXGaT/ECLnvv2K+XXedbON+j4kPQzNpyxQ=
 =zrHq
 -----END PGP SIGNATURE-----

Merge tag 's390-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

 - fix reference counting for ap devices

 - fix paes selftest

 - fix pmd_deref()/pud_deref() so they can also handle large pages

 - remove unused vdso file and defines

 - update defconfigs

 - call rcu_cpu_starting() early in smp init code to avoid lockdep
   warnings

 - fix hotplug of PCI function missing bus

* tag 's390-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix hot-plug of PCI function missing bus
  s390/smp: move rcu_cpu_starting() earlier
  s390/pkey: fix paes selftest failure with paes and pkey static build
  s390: update defconfigs
  s390/vdso: remove unused constants
  s390/vdso: remove empty unused file
  s390/mm: make pmd/pud_deref() large page aware
  s390/ap: fix ap devices reference counting
2020-11-06 12:21:33 -08:00
Palmer Dabbelt c2c81bb2f6
RISC-V: Fix the VDSO symbol generaton for binutils-2.35+
We were relying on GNU ld's ability to re-link executable files in order
to extract our VDSO symbols.  This behavior was deemed a bug as of
binutils-2.35 (specifically the binutils-gdb commit a87e1817a4 ("Have
the linker fail if any attempt to link in an executable is made."), but
as that has been backported to at least Debian's binutils-2.34 in may
manifest in other places.

The previous version of this was a bit of a mess: we were linking a
static executable version of the VDSO, containing only a subset of the
input symbols, which we then linked into the kernel.  This worked, but
certainly wasn't a supported path through the toolchain.  Instead this
new version parses the textual output of nm to produce a symbol table.
Both rely on near-zero addresses being linkable, but as we rely on weak
undefined symbols being linkable elsewhere I don't view this as a major
issue.

Fixes: e2c0cdfba7 ("RISC-V: User-facing API")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-06 00:03:48 -08:00
Anup Patel 1074dd44c5
RISC-V: Use non-PGD mappings for early DTB access
Currently, we use PGD mappings for early DTB mapping in early_pgd
but this breaks Linux kernel on SiFive Unleashed because on SiFive
Unleashed PMP checks don't work correctly for PGD mappings.

To fix early DTB mappings on SiFive Unleashed, we use non-PGD
mappings (i.e. PMD) for early DTB access.

Fixes: 8f3a2b4a96 ("RISC-V: Move DT mapping outof fixmap")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-06 00:03:47 -08:00
Changbin Du 635e3f3e47
riscv: uaccess: fix __put_kernel_nofault()
The copy_from_kernel_nofault() is broken on riscv because the 'dst' and
'src' are mistakenly reversed in __put_kernel_nofault() macro.

copy_to_kernel_nofault:
...
0xffffffe0003159b8 <+30>:    sd      a4,0(a1) # a1 aka 'src'

Fixes: d464118cdc ("riscv: implement __get_kernel_nofault and __put_user_nofault")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-06 00:03:46 -08:00
Liu Shaohua bcacf5f6f2
riscv: fix pfn_to_virt err in do_page_fault().
The argument to pfn_to_virt() should be pfn not the value of CSR_SATP.

Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: liush <liush@allwinnertech.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-05 21:13:44 -08:00
Scott Cheloha 3fb4a8fa28 powerpc/numa: Fix build when CONFIG_NUMA=n
Add a non-NUMA definition for of_drconf_to_nid_single() to topology.h
so we have one even if powerpc/mm/numa.c is not compiled. On a
non-NUMA kernel the appropriate node id is always first_online_node.

Fixes: 72cdd117c4 ("pseries/hotplug-memory: hot-add: skip redundant LMB lookup")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201105223040.3612663-1-cheloha@linux.ibm.com
2020-11-06 14:16:19 +11:00
Sean Anderson 79605f1394
riscv: Set text_offset correctly for M-Mode
M-Mode Linux is loaded at the start of RAM, not 2MB later. Perhaps this
should be calculated based on PAGE_OFFSET somehow? Even better would be to
deprecate text_offset and instead introduce something absolute.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-05 17:32:27 -08:00
Benjamin Gwin 108aa50365 arm64: kexec_file: try more regions if loading segments fails
It's possible that the first region picked for the new kernel will make
it impossible to fit the other segments in the required 32GB window,
especially if we have a very large initrd.

Instead of giving up, we can keep testing other regions for the kernel
until we find one that works.

Suggested-by: Ryan O'Leary <ryanoleary@google.com>
Signed-off-by: Benjamin Gwin <bgwin@google.com>
Link: https://lore.kernel.org/r/20201103201106.2397844-1-bgwin@google.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-05 21:48:05 +00:00
Anand K Mistry 1978b3a53a x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP
On AMD CPUs which have the feature X86_FEATURE_AMD_STIBP_ALWAYS_ON,
STIBP is set to on and

  spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED

At the same time, IBPB can be set to conditional.

However, this leads to the case where it's impossible to turn on IBPB
for a process because in the PR_SPEC_DISABLE case in ib_prctl_set() the

  spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED

condition leads to a return before the task flag is set. Similarly,
ib_prctl_get() will return PR_SPEC_DISABLE even though IBPB is set to
conditional.

More generally, the following cases are possible:

1. STIBP = conditional && IBPB = on for spectre_v2_user=seccomp,ibpb
2. STIBP = on && IBPB = conditional for AMD CPUs with
   X86_FEATURE_AMD_STIBP_ALWAYS_ON

The first case functions correctly today, but only because
spectre_v2_user_ibpb isn't updated to reflect the IBPB mode.

At a high level, this change does one thing. If either STIBP or IBPB
is set to conditional, allow the prctl to change the task flag.
Also, reflect that capability when querying the state. This isn't
perfect since it doesn't take into account if only STIBP or IBPB is
unconditionally on. But it allows the conditional feature to work as
expected, without affecting the unconditional one.

 [ bp: Massage commit message and comment; space out statements for
   better readability. ]

Fixes: 21998a3515 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20201105163246.v2.1.Ifd7243cd3e2c2206a893ad0a5b9a4f19549e22c6@changeid
2020-11-05 21:43:34 +01:00
Linus Torvalds 6732b35485 hyperv-fixes for 5.10-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl+kK6cTHHdlaS5saXVA
 a2VybmVsLm9yZwAKCRB2FHBfkEGgXsv3B/9qN84MVeriRKRUn1e+F15NHqGfJezZ
 oS/xjo2XoFaMrTpu8DgzN2C3yMZ0eutJYloUXWCJap1yI1ZaivupAPsOxCc42HwC
 /lRu6vI9jPL2kUzWzusR/yuijZsfj5GYkoNRW9HM3XruXG1Ta59q1JkLhIbUJKFk
 KKtKJoLn2+DQe8GWp3K8gJd5kryUSFWq1j6LO8w3kfSHxzj6AmDLWgHje8d1y0qA
 IKeNNTsnF3kht0/oBNdf7QRKA5X1yb6kpJ9m9+0p/RxMA9eSGmH6iOc5j1VyM4a9
 qf1S++4yENoGtsFzid/6XXSrBPGvI57qCB76uRvwyrDwzKkRmke/SLDj
 =mkuq
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - clarify a comment (Michael Kelley)

 - change a pr_warn() to pr_info() (Olaf Hering)

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Clarify comment on x2apic mode
  hv_balloon: disable warning when floor reached
2020-11-05 11:32:03 -08:00
Atish Patra 1bd14a66ee
RISC-V: Remove any memblock representing unusable memory area
RISC-V limits the physical memory size by -PAGE_OFFSET. Any memory beyond
that size from DRAM start is unusable. Just remove any memblock pointing
to those memory region without worrying about computing the maximum size.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-05 09:56:17 -08:00
Christophe Leroy 33fe43cfd9 powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry
When _PAGE_ACCESSED is not set, a minor fault is expected.
To do this, TLB miss exception ANDs _PAGE_PRESENT and _PAGE_ACCESSED
into the L2 entry valid bit.

To simplify the processing and reduce the number of instructions in
TLB miss exceptions, manage it as an APG bit and get it next to
_PAGE_GUARDED bit to allow a copy in one go. Then declare the
corresponding groups as handling all accesses as user accesses.
As the PP bits always define user as No Access, it will generate
a fault.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/80f488db230c6b0e7b3b990d72bd94a8a069e93e.1602492856.git.christophe.leroy@csgroup.eu
2020-11-05 23:34:25 +11:00
Christophe Leroy 29daf869cb powerpc/8xx: Always fault when _PAGE_ACCESSED is not set
The kernel expects pte_young() to work regardless of CONFIG_SWAP.

Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.

This adds at least 3 instructions to the TLB miss exception
handlers fast path. Following patch will reduce this overhead.

Also update the rotation instruction to the correct number of bits
to reflect all changes done to _PAGE_ACCESSED over time.

Fixes: d069cb4373 ("powerpc/8xx: Don't touch ACCESSED when no SWAP.")
Fixes: 5f356497c3 ("powerpc/8xx: remove unused _PAGE_WRITETHRU")
Fixes: e0a8e0d90a ("powerpc/8xx: Handle PAGE_USER via APG bits")
Fixes: 5b2753fc3e ("powerpc/8xx: Implementation of PAGE_EXEC")
Fixes: a891c43b97 ("powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/af834e8a0f1fa97bfae65664950f0984a70c4750.1602492856.git.christophe.leroy@csgroup.eu
2020-11-05 23:34:25 +11:00
Christophe Leroy 0540b0d2ce powerpc/40x: Always fault when _PAGE_ACCESSED is not set
The kernel expects pte_young() to work regardless of CONFIG_SWAP.

Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.

Fixes: 2c74e2586b ("powerpc/40x: Rework 40x PTE access and TLB miss")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b02ca2ed2d3676a096219b48c0f69ec982a75bcf.1602342801.git.christophe.leroy@csgroup.eu
2020-11-05 23:34:16 +11:00
Christophe Leroy 11522448e6 powerpc/603: Always fault when _PAGE_ACCESSED is not set
The kernel expects pte_young() to work regardless of CONFIG_SWAP.

Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.

Fixes: 84de6ab0e9 ("powerpc/603: don't handle PAGE_ACCESSED in TLB miss handlers.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a44367744de54e2315b2f1a8cbbd7f88488072e0.1602342806.git.christophe.leroy@csgroup.eu
2020-11-05 23:34:07 +11:00
Michael Ellerman 1344a23201 powerpc: Use asm_goto_volatile for put_user()
Andreas reported that commit ee0a49a687 ("powerpc/uaccess: Switch
__put_user_size_allowed() to __put_user_asm_goto()") broke
CLONE_CHILD_SETTID.

Further inspection showed that the put_user() in schedule_tail() was
missing entirely, the store not emitted by the compiler.

  <.schedule_tail>:
    mflr    r0
    std     r0,16(r1)
    stdu    r1,-112(r1)
    bl      <.finish_task_switch>
    ld      r9,2496(r3)
    cmpdi   cr7,r9,0
    bne     cr7,<.schedule_tail+0x60>
    ld      r3,392(r13)
    ld      r9,1392(r3)
    cmpdi   cr7,r9,0
    beq     cr7,<.schedule_tail+0x3c>
    li      r4,0
    li      r5,0
    bl      <.__task_pid_nr_ns>
    nop
    bl      <.calculate_sigpending>
    nop
    addi    r1,r1,112
    ld      r0,16(r1)
    mtlr    r0
    blr
    nop
    nop
    nop
    bl      <.__balance_callback>
    b       <.schedule_tail+0x1c>

Notice there are no stores other than to the stack. There should be a
stw in there for the store to current->set_child_tid.

This is only seen with GCC 4.9 era compilers (tested with 4.9.3 and
4.9.4), and only when CONFIG_PPC_KUAP is disabled.

When CONFIG_PPC_KUAP=y, the inline asm that's part of the isync()
and mtspr() inlined via allow_user_access() seems to be enough to
avoid the bug.

We already have a macro to work around this (or a similar bug), called
asm_volatile_goto which includes an empty asm block to tickle the
compiler into generating the right code. So use that.

With this applied the code generation looks more like it will work:

  <.schedule_tail>:
    mflr    r0
    std     r31,-8(r1)
    std     r0,16(r1)
    stdu    r1,-144(r1)
    std     r3,112(r1)
    bl      <._mcount>
    nop
    ld      r3,112(r1)
    bl      <.finish_task_switch>
    ld      r9,2624(r3)
    cmpdi   cr7,r9,0
    bne     cr7,<.schedule_tail+0xa0>
    ld      r3,2408(r13)
    ld      r31,1856(r3)
    cmpdi   cr7,r31,0
    beq     cr7,<.schedule_tail+0x80>
    li      r4,0
    li      r5,0
    bl      <.__task_pid_nr_ns>
    nop
    li      r9,-1
    clrldi  r9,r9,12
    cmpld   cr7,r31,r9
    bgt     cr7,<.schedule_tail+0x80>
    lis     r9,16
    rldicr  r9,r9,32,31
    subf    r9,r31,r9
    cmpldi  cr7,r9,3
    ble     cr7,<.schedule_tail+0x80>
    li      r9,0
    stw     r3,0(r31)				<-- stw
    nop
    bl      <.calculate_sigpending>
    nop
    addi    r1,r1,144
    ld      r0,16(r1)
    ld      r31,-8(r1)
    mtlr    r0
    blr
    nop
    bl      <.__balance_callback>
    b       <.schedule_tail+0x30>

Fixes: ee0a49a687 ("powerpc/uaccess: Switch __put_user_size_allowed() to __put_user_asm_goto()")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201104111742.672142-1-mpe@ellerman.id.au
2020-11-05 10:15:59 +11:00
Ryan Kosta 9d750c75bd
risc-v: kernel: ftrace: Fixes improper SPDX comment style
Signed-off-by: Ryan Kosta <ryanpkosta@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-04 13:28:20 -08:00
Fangrui Song 4d6ffa27b8 x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S
Commit

  393f203f5f ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions")

added .weak directives to arch/x86/lib/mem*_64.S instead of changing the
existing ENTRY macros to WEAK. This can lead to the assembly snippet

  .weak memcpy
  ...
  .globl memcpy

which will produce a STB_WEAK memcpy with GNU as but STB_GLOBAL memcpy
with LLVM's integrated assembler before LLVM 12. LLVM 12 (since
https://reviews.llvm.org/D90108) will error on such an overridden symbol
binding.

Commit

  ef1e03152c ("x86/asm: Make some functions local")

changed ENTRY in arch/x86/lib/memcpy_64.S to SYM_FUNC_START_LOCAL, which
was ineffective due to the preceding .weak directive.

Use the appropriate SYM_FUNC_START_WEAK instead.

Fixes: 393f203f5f ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions")
Fixes: ef1e03152c ("x86/asm: Make some functions local")
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103012358.168682-1-maskray@google.com
2020-11-04 12:30:20 +01:00
Ard Biesheuvel b9bc36704c ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservations
free_highpages() iterates over the free memblock regions in high
memory, and marks each page as available for the memory management
system.

Until commit cddb5ddf2b ("arm, xtensa: simplify initialization of
high memory pages") it rounded beginning of each region upwards and end of
each region downwards.

However, after that commit free_highmem() rounds the beginning and end of
each region downwards, and we may end up freeing a page that is
memblock_reserve()d, resulting in memory corruption.

Restore the original rounding of the region boundaries to avoid freeing
reserved pages.

Fixes: cddb5ddf2b ("arm, xtensa: simplify initialization of high memory pages")
Link: https://lore.kernel.org/r/20201029110334.4118-1-ardb@kernel.org/
Link: https://lore.kernel.org/r/20201031094345.6984-1-rppt@kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Co-developed-by:  Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
2020-11-04 10:42:57 +02:00
Linus Torvalds 43c834186c A couple of changes to the SEV-ES code to perform more stringent
hypervisor checks before enabling encryption. (Joerg Roedel)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl+hKN8ACgkQEsHwGGHe
 VUrkZQ/+LWjbDrbkLCQpWuzLagAocZMKKvr4+2ujU+krj0QU5FFJbfuzhkktQD+H
 cbfOW7+E8lqTDoj/dwoJPj2Xs8HvW4Ua6sbxF5lCPhlEr3NIetRfQ7SPj3qFvQG+
 FKP/55RSnjKIx7aZXKN9YAw2FF3EC1BisjszCBKid5S8HbGqjLMb2Ue0i/nssksY
 CvLwaxtDOGuSzJ8FwL+vmI70NkeLZ0ulTxbuxXAqfMTvJX3e1QA9dgeZMgfU1hng
 eA1Pjlm0X7FOsnwihYP2EZ6NzRrTkYeGl1Iagz1apqlDlQ+bcaxvs2btIyb7MKt5
 6PPDGg0P0WVMNfOEUYTZob31QcLnakA/p8kG8sYE6h2PlqO9Tf5cpmOJ6pv+DYFz
 hfcjAZfamStUbWdWpr33RVCXN5pwZRu+UytD3JYykzgwmKXQxLHqrbjHXLO3zJ7k
 +L0JE+N2vmi/7M5Ghsv3yKwy5fR5rMT5V6qEHSd1qrr9VpKBceNMJgPA8wh4882F
 SD5sD2b6L/Cf9L4FAFqICHb/p4rxPRf5VnUoybo70U7EiwfbZQik5g3X5cO4KO2N
 0z8nMk7dIZncQF0LYJNElIvKonrU8sIa+TbHjYyBWdQlOPgK4IlCvZeyjVUvUG24
 kYx2WbANhCxGFd86rsl5P7xNXvBiSALf1afbQPvU0VTbZ43vSnQ=
 =Pvgr
 -----END PGP SIGNATURE-----

Merge tag 'x86_seves_for_v5.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 SEV-ES fixes from Borislav Petkov:
 "A couple of changes to the SEV-ES code to perform more stringent
  hypervisor checks before enabling encryption (Joerg Roedel)"

* tag 'x86_seves_for_v5.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Do not support MMIO to/from encrypted memory
  x86/head/64: Check SEV encryption before switching to kernel page-table
  x86/boot/compressed/64: Check SEV encryption in 64-bit boot-path
  x86/boot/compressed/64: Sanity-check CPUID results in the early #VC handler
  x86/boot/compressed/64: Introduce sev_status
2020-11-03 09:55:09 -08:00
Niklas Schnelle 0b2ca2c7d0 s390/pci: fix hot-plug of PCI function missing bus
Under some circumstances in particular with "Reconfigure I/O Path"
a zPCI function may first appear in Standby through a PCI event with
PEC 0x0302 which initially makes it visible to the zPCI subsystem,
Only after that is it configured with a zPCI event  with PEC 0x0301.
If the zbus is still missing a PCI function zero (devfn == 0) when the
PCI event 0x0301 is handled zdev->zbus->bus is still NULL and gets
dereferenced in common code.
Check for this case and enable but don't scan the zPCI function.
This matches what would happen if we immediately got the 0x0301
configuration request or the function was included in CLP List PCI.
In all cases the PCI functions with devfn != 0 will be scanned once
function 0 appears.

Fixes: 3047766bc6 ("s390/pci: fix enabling a reserved PCI function")
Cc: <stable@vger.kernel.org> # 5.8
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03 15:12:16 +01:00
Qian Cai de5d9dae15 s390/smp: move rcu_cpu_starting() earlier
The call to rcu_cpu_starting() in smp_init_secondary() is not early
enough in the CPU-hotplug onlining process, which results in lockdep
splats as follows:

 WARNING: suspicious RCU usage
 -----------------------------
 kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 RCU used illegally from offline CPU!
 rcu_scheduler_active = 1, debug_locks = 1
 no locks held by swapper/1/0.

 Call Trace:
 show_stack+0x158/0x1f0
 dump_stack+0x1f2/0x238
 __lock_acquire+0x2640/0x4dd0
 lock_acquire+0x3a8/0xd08
 _raw_spin_lock_irqsave+0xc0/0xf0
 clockevents_register_device+0xa8/0x528
 init_cpu_timer+0x33e/0x468
 smp_init_secondary+0x11a/0x328
 smp_start_secondary+0x82/0x88

This is avoided by moving the call to rcu_cpu_starting up near the
beginning of the smp_init_secondary() function. Note that the
raw_smp_processor_id() is required in order to avoid calling into
lockdep before RCU has declared the CPU to be watched for readers.

Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/
Signed-off-by: Qian Cai <cai@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03 15:12:16 +01:00
Heiko Carstens c3d9cdca73 s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03 15:12:16 +01:00
Heiko Carstens cfef9aa69a s390/vdso: remove unused constants
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03 15:12:16 +01:00
Heiko Carstens e99198661e s390/vdso: remove empty unused file
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03 15:12:15 +01:00
Gerald Schaefer b0e98aa9c4 s390/mm: make pmd/pud_deref() large page aware
pmd/pud_deref() assume that they will never operate on large pmd/pud
entries, and therefore only use the non-large _xxx_ENTRY_ORIGIN mask.
With commit 9ec8fa8dc3 ("s390/vmemmap: extend modify_pagetable()
to handle vmemmap"), that assumption is no longer true, at least for
pmd_deref().

In theory, we could end up with wrong addresses because some of the
non-address bits of a large entry would not be masked out.
In practice, this does not (yet) show any impact, because vmemmap_free()
is currently never used for s390.

Fix pmd/pud_deref() to check for the entry type and use the
_xxx_ENTRY_ORIGIN_LARGE mask for large entries.

While at it, also move pmd/pud_pfn() around, in order to avoid code
duplication, because they do the same thing.

Fixes: 9ec8fa8dc3 ("s390/vmemmap: extend modify_pagetable() to handle vmemmap")
Cc: <stable@vger.kernel.org> # 5.9
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03 15:12:15 +01:00
Jean-Philippe Brucker 7ee31a3aa8 arm64: kprobes: Use BRK instead of single-step when executing instructions out-of-line
Commit 36dadef23f ("kprobes: Init kprobes in early_initcall") enabled
using kprobes from early_initcall. Unfortunately at this point the
hardware debug infrastructure is not operational. The OS lock may still
be locked, and the hardware watchpoints may have unknown values when
kprobe enables debug monitors to single-step instructions.

Rather than using hardware single-step, append a BRK instruction after
the instruction to be executed out-of-line.

Fixes: 36dadef23f ("kprobes: Init kprobes in early_initcall")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20201103134900.337243-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-03 14:03:38 +00:00
Vanshidhar Konda 2a13c13b39 arm64: NUMA: Kconfig: Increase NODES_SHIFT to 4
The current arm64 default config limits max NUMA nodes available on
system to 4 (NODES_SHIFT = 2). Today's arm64 systems can reach or
exceed 16 NUMA nodes. To accomodate current hardware and to fit
NODES_SHIFT within page flags on arm64, increase NODES_SHIFT to 4.

Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20201020173409.1266576-1-vanshikonda@os.amperecomputing.com/
Link: https://lore.kernel.org/r/20201030173050.1182876-1-vanshikonda@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-03 09:31:53 +00:00
Vineet Gupta 3b57533b46 ARC: [plat-hsdk] Remap CCMs super early in asm boot trampoline
ARC HSDK platform stopped booting on released v5.10-rc1, getting stuck
in startup of non master SMP cores.

This was bisected to upstream commit 7fef431be9
"(mm/page_alloc: place pages to tail in __free_pages_core())"
That commit itself is harmless, it just exposed a subtle assumption in
our platform code (hence CC'ing linux-mm just as FYI in case some other
arches / platforms trip on it).

The upstream commit is semantically disruptive as it reverses the order
of page allocations (actually it can be good test for hardware
verification to exercise different memory patterns altogether).
For ARC HSDK platform that meant a remapped memory region (pertaining to
unused Closely Coupled Memory) started getting used early for dynamice
allocations, while not effectively remapped on all the cores, triggering
memory error exception on those cores.

The fix is to move the CCM remapping from early platform code to to early core
boot code. And while it is undesirable to riddle common boot code with
platform quirks, there is no other way to do this since the faltering code
involves setting up stack itself so even function calls are not allowed at
that point.

If anyone is interested, all the gory details can be found at Link below.

Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/32
Cc: David Hildenbrand <david@redhat.com>
Cc: linux-mm@kvack.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-11-02 11:45:09 -08:00
Vineet Gupta 328d2168ca ARC: stack unwinding: avoid indefinite looping
Currently stack unwinder is a while(1) loop which relies on the dwarf
unwinder to signal termination, which in turn relies on dwarf info to do
so. This in theory could cause an infinite loop if the dwarf info was
somehow messed up or the register contents were etc.

This fix thus detects the excessive looping and breaks the loop.

| Mem: 26184K used, 1009136K free, 0K shrd, 0K buff, 14416K cached
| CPU:  0.0% usr 72.8% sys  0.0% nic 27.1% idle  0.0% io  0.0% irq  0.0% sirq
| Load average: 4.33 2.60 1.11 2/74 139
|   PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
|   133     2 root     SWN      0  0.0   3 22.9 [rcu_torture_rea]
|   132     2 root     SWN      0  0.0   0 22.0 [rcu_torture_rea]
|   131     2 root     SWN      0  0.0   3 21.5 [rcu_torture_rea]
|   126     2 root     RW       0  0.0   2  5.4 [rcu_torture_wri]
|   129     2 root     SWN      0  0.0   0  0.2 [rcu_torture_fak]
|   137     2 root     SW       0  0.0   0  0.2 [rcu_torture_cbf]
|   127     2 root     SWN      0  0.0   0  0.1 [rcu_torture_fak]
|   138   115 root     R     1464  0.1   2  0.1 top
|   130     2 root     SWN      0  0.0   0  0.1 [rcu_torture_fak]
|   128     2 root     SWN      0  0.0   0  0.1 [rcu_torture_fak]
|   115     1 root     S     1472  0.1   1  0.0 -/bin/sh
|   104     1 root     S     1464  0.1   0  0.0 inetd
|     1     0 root     S     1456  0.1   2  0.0 init
|    78     1 root     S     1456  0.1   0  0.0 syslogd -O /var/log/messages
|   134     2 root     SW       0  0.0   2  0.0 [rcu_torture_sta]
|    10     2 root     IW       0  0.0   1  0.0 [rcu_preempt]
|    88     2 root     IW       0  0.0   1  0.0 [kworker/1:1-eve]
|    66     2 root     IW       0  0.0   2  0.0 [kworker/2:2-eve]
|    39     2 root     IW       0  0.0   2  0.0 [kworker/2:1-eve]
| unwinder looping too long, aborting !

Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-11-02 11:45:08 -08:00
Qian Cai 99f070b623 powerpc/smp: Call rcu_cpu_starting() earlier
The call to rcu_cpu_starting() in start_secondary() is not early
enough in the CPU-hotplug onlining process, which results in lockdep
splats as follows (with CONFIG_PROVE_RCU_LIST=y):

  WARNING: suspicious RCU usage
  -----------------------------
  kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!!

  other info that might help us debug this:

  RCU used illegally from offline CPU!
  rcu_scheduler_active = 1, debug_locks = 1
  no locks held by swapper/1/0.

  Call Trace:
  dump_stack+0xec/0x144 (unreliable)
  lockdep_rcu_suspicious+0x128/0x14c
  __lock_acquire+0x1060/0x1c60
  lock_acquire+0x140/0x5f0
  _raw_spin_lock_irqsave+0x64/0xb0
  clockevents_register_device+0x74/0x270
  register_decrementer_clockevent+0x94/0x110
  start_secondary+0x134/0x800
  start_secondary_prolog+0x10/0x14

This is avoided by adding a call to rcu_cpu_starting() near the
beginning of the start_secondary() function. Note that the
raw_smp_processor_id() is required in order to avoid calling into
lockdep before RCU has declared the CPU to be watched for readers.

It's safe to call rcu_cpu_starting() in the arch code as well as later
in generic code, as explained by Paul:

  It uses a per-CPU variable so that RCU pays attention only to the
  first call to rcu_cpu_starting() if there is more than one of them.
  This is even intentional, due to there being a generic
  arch-independent call to rcu_cpu_starting() in
  notify_cpu_starting().

  So multiple calls to rcu_cpu_starting() are fine by design.

Fixes: 4d004099a6 ("lockdep: Fix lockdep recursion")
Signed-off-by: Qian Cai <cai@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
[mpe: Add Fixes tag, reword slightly & expand change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201028182334.13466-1-cai@redhat.com
2020-11-02 12:54:20 +11:00
Qian Cai fd552e0542 powerpc/eeh_cache: Fix a possible debugfs deadlock
Lockdep complains that a possible deadlock below in
eeh_addr_cache_show() because it is acquiring a lock with IRQ enabled,
but eeh_addr_cache_insert_dev() needs to acquire the same lock with IRQ
disabled. Let's just make eeh_addr_cache_show() acquire the lock with
IRQ disabled as well.

        CPU0                    CPU1
        ----                    ----
   lock(&pci_io_addr_cache_root.piar_lock);
                                local_irq_disable();
                                lock(&tp->lock);
                                lock(&pci_io_addr_cache_root.piar_lock);
   <Interrupt>
     lock(&tp->lock);

  *** DEADLOCK ***

  lock_acquire+0x140/0x5f0
  _raw_spin_lock_irqsave+0x64/0xb0
  eeh_addr_cache_insert_dev+0x48/0x390
  eeh_probe_device+0xb8/0x1a0
  pnv_pcibios_bus_add_device+0x3c/0x80
  pcibios_bus_add_device+0x118/0x290
  pci_bus_add_device+0x28/0xe0
  pci_bus_add_devices+0x54/0xb0
  pcibios_init+0xc4/0x124
  do_one_initcall+0xac/0x528
  kernel_init_freeable+0x35c/0x3fc
  kernel_init+0x24/0x148
  ret_from_kernel_thread+0x5c/0x80

  lock_acquire+0x140/0x5f0
  _raw_spin_lock+0x4c/0x70
  eeh_addr_cache_show+0x38/0x110
  seq_read+0x1a0/0x660
  vfs_read+0xc8/0x1f0
  ksys_read+0x74/0x130
  system_call_exception+0xf8/0x1d0
  system_call_common+0xe8/0x218

Fixes: 5ca85ae631 ("powerpc/eeh_cache: Add a way to dump the EEH address cache")
Signed-off-by: Qian Cai <cai@redhat.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201028152717.8967-1-cai@redhat.com
2020-11-02 12:54:20 +11:00
Linus Torvalds 7b56fbd83e Three fixes all related to #DB:
- Handle the BTF bit correctly so it doesn't get lost due to a kernel #DB
 
  - Only clear and set the virtual DR6 value used by ptrace on user space
    triggered #DB. A kernel #DB must leave it alone to ensure data
    consistency for ptrace.
 
  - Make the bitmasking of the virtual DR6 storage correct so it does not
    lose DR_STEP.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+evlcTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYofaAD/4gzRDGRZiorwX60o+RuJjgBN/iS1BN
 SEpprlC2TGtdiOvGNKxMxwMZFbpSExgGtwku6xya1VDDLJS+NwartL0AEnCsei2e
 O4KqUiU6HuBsKi+M0LARVm8bHRzb1s3YjrFFMwrarTm40joOvxNiw2w+nvTtamfJ
 tlkQMp5/iX0KNO5FBLMPDDwVyE3xY+yAyiI0Z7bPmrhNSlNWW6x8QKoBpp8T5v2a
 ATIhAnOAClZVH/ig9A/fbUgsBqxyyIZRSW2wudAtHZg8NhDox+TitUIWG+IEoRDL
 uW2hKSqxrBsapTWxv2+tN5Kk0ORUSqEMqWaog80pjP3o0ezUKZxQsYuAZ430bzDr
 qqVWGpX42UjYet6V4S9P+I/gN3lCZmYoc24zfWLT8T8KRaDOOebYmC7EiJjudaXd
 sEYCKRv10ysBlFqXyzz2LDOyjFOiXodyFbhdBQVCPUuis99mHdYIJHoUxpYhgZSH
 IIbYn9RUsij6mMaCfPhNVoJwRVtY+AGGisfEnk+v5dfFYQruliFWgyjDYWT5+IxQ
 ZsJOJVCqR8JT9bL0xiTNbcZ3SvRfMQ2pLfd6MWX9fQZ9o6LvVSg32gPjgneKpQ/y
 QLRtiyVW3oBw2rJZeoYVIHrD8r3SUOI8iQLcCjXwxQoBiei6G+4GNdFtkUmqAFB3
 VvtPZYyjj05gCw==
 =Hfek
 -----END PGP SIGNATURE-----

Merge tag 'x86-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "Three fixes all related to #DB:

   - Handle the BTF bit correctly so it doesn't get lost due to a kernel
     #DB

   - Only clear and set the virtual DR6 value used by ptrace on user
     space triggered #DB. A kernel #DB must leave it alone to ensure
     data consistency for ptrace.

   - Make the bitmasking of the virtual DR6 storage correct so it does
     not lose DR_STEP"

* tag 'x86-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/debug: Fix DR_STEP vs ptrace_get_debugreg(6)
  x86/debug: Only clear/set ->virtual_dr6 for userspace #DB
  x86/debug: Fix BTF handling
2020-11-01 11:21:26 -08:00
Linus Torvalds 2d38c80d5b ARM:
* selftest fix
 * Force PTE mapping on device pages provided via VFIO
 * Fix detection of cacheable mapping at S2
 * Fallback to PMD/PTE mappings for composite huge pages
 * Fix accounting of Stage-2 PGD allocation
 * Fix AArch32 handling of some of the debug registers
 * Simplify host HYP entry
 * Fix stray pointer conversion on nVHE TLB invalidation
 * Fix initialization of the nVHE code
 * Simplify handling of capabilities exposed to HYP
 * Nuke VCPUs caught using a forbidden AArch32 EL0
 
 x86:
 * new nested virtualization selftest
 * Miscellaneous fixes
 * make W=1 fixes
 * Reserve new CPUID bit in the KVM leaves
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+dhRAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroPWCgf/U997UW/11IdNtkehQO/DFdx7lHev
 +IahN1Pnbt92ZoR5nGhK9pgvDahIVhqTmUvgV+3fD24OnqXTpYTu1fliBvL6ynbN
 J9Ycf0zFAgwfgTTD5UexTlEovnhX4xz7NDmd6rpxGDZdMaBHQFPkCXBFK45pf4nd
 O349aHV0X1AA7Tt/sLhpXpi74Vake1xErLHKhIVLHKyo/zDm+Q0UZry068NNBzTr
 St3+QSGlFXhuekVrZLh+DShh6rZGLyY9tcySt6o0Jk7fSs1lmEnPbBgeeqYmyHMd
 Yn+ybhthmNkkpI8so70TA9roiVar4UmjnMBOiav62bo7ue26pKE5cWQyXw==
 =mvBr
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "ARM:
   - selftest fix
   - force PTE mapping on device pages provided via VFIO
   - fix detection of cacheable mapping at S2
   - fallback to PMD/PTE mappings for composite huge pages
   - fix accounting of Stage-2 PGD allocation
   - fix AArch32 handling of some of the debug registers
   - simplify host HYP entry
   - fix stray pointer conversion on nVHE TLB invalidation
   - fix initialization of the nVHE code
   - simplify handling of capabilities exposed to HYP
   - nuke VCPUs caught using a forbidden AArch32 EL0

  x86:
   - new nested virtualization selftest
   - miscellaneous fixes
   - make W=1 fixes
   - reserve new CPUID bit in the KVM leaves"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: vmx: remove unused variable
  KVM: selftests: Don't require THP to run tests
  KVM: VMX: eVMCS: make evmcs_sanitize_exec_ctrls() work again
  KVM: selftests: test behavior of unmapped L2 APIC-access address
  KVM: x86: Fix NULL dereference at kvm_msr_ignored_check()
  KVM: x86: replace static const variables with macros
  KVM: arm64: Handle Asymmetric AArch32 systems
  arm64: cpufeature: upgrade hyp caps to final
  arm64: cpufeature: reorder cpus_have_{const, final}_cap()
  KVM: arm64: Factor out is_{vhe,nvhe}_hyp_code()
  KVM: arm64: Force PTE mapping on fault resulting in a device mapping
  KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes
  KVM: arm64: Fix masks in stage2_pte_cacheable()
  KVM: arm64: Fix AArch32 handling of DBGD{CCINT,SCRext} and DBGVCR
  KVM: arm64: Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT
  KVM: arm64: Drop useless PAN setting on host EL1 to EL2 transition
  KVM: arm64: Remove leftover kern_hyp_va() in nVHE TLB invalidation
  KVM: arm64: Don't corrupt tpidr_el2 on failed HVC call
  x86/kvm: Reserve KVM_FEATURE_MSI_EXT_DEST_ID
2020-11-01 09:43:32 -08:00
Paolo Bonzini 9478dec3b5 KVM: vmx: remove unused variable
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-31 11:38:43 -04:00
Vitaly Kuznetsov 064eedf2c5 KVM: VMX: eVMCS: make evmcs_sanitize_exec_ctrls() work again
It was noticed that evmcs_sanitize_exec_ctrls() is not being executed
nowadays despite the code checking 'enable_evmcs' static key looking
correct. Turns out, static key magic doesn't work in '__init' section
(and it is unclear when things changed) but setup_vmcs_config() is called
only once per CPU so we don't really need it to. Switch to checking
'enlightened_vmcs' instead, it is supposed to be in sync with
'enable_evmcs'.

Opportunistically make evmcs_sanitize_exec_ctrls '__init' and drop unneeded
extra newline from it.

Reported-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201014143346.2430936-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-31 10:27:58 -04:00
Linus Torvalds aab6bf505a arm64 fixes for -rc2
- Fixes to MTE kselftests
 
 - Fix return code from KVM Spectre-v2 hypercall
 
 - Build fixes for ld.lld and Clang's infamous integrated assembler
 
 - Ensure RCU is up and running before we use printk()
 
 - Workaround for Cortex-A77 erratum 1508412
 
 - Fix linker warnings from unexpected ELF sections
 
 - Ensure PE/COFF sections are 64k aligned
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+cOVMQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNGfsB/40EjtRRb68CIdNSoe5ydbsJgWtkVm/JmUA
 cFpNHpkMYBxlT758Tip6zsqhFHOLCJKBJTKCey64bT78uO+Bv/FbdS6Rn7SdVTpv
 1+4moJZDnf1tUZH1hJpRqUbuKT44uk/FcVnwWO1Wqwd0fxQqyNdpTJpG9iudGGVV
 sZcwKtOP2Epnt35CdbasIacz4N8KGKwHaxrkdJvr13hHaj19cNRUKPdpsxr30l7f
 aWgvvhDRwU4ZZCEDLG+NCtQ1IUrLvSJXCzCroU8w83pNMP3dfkdA1ObwtrdjfQE4
 /ziuYQkYI6lcoe42LmZ08lhIj/VJ7gfEAm/E5EnNMCIrj0QEvn49
 =KVhg
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "The diffstat is a bit spread out thanks to an invasive CPU erratum
  workaround which missed the merge window and also a bunch of fixes to
  the recently added MTE selftests.

   - Fixes to MTE kselftests

   - Fix return code from KVM Spectre-v2 hypercall

   - Build fixes for ld.lld and Clang's infamous integrated assembler

   - Ensure RCU is up and running before we use printk()

   - Workaround for Cortex-A77 erratum 1508412

   - Fix linker warnings from unexpected ELF sections

   - Ensure PE/COFF sections are 64k aligned"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Change .weak to SYM_FUNC_START_WEAK_PI for arch/arm64/lib/mem*.S
  arm64/smp: Move rcu_cpu_starting() earlier
  arm64: Add workaround for Arm Cortex-A77 erratum 1508412
  arm64: Add part number for Arm Cortex-A77
  arm64: mte: Document that user PSTATE.TCO is ignored by kernel uaccess
  module: use hidden visibility for weak symbol references
  arm64: efi: increase EFI PE/COFF header padding to 64 KB
  arm64: vmlinux.lds: account for spurious empty .igot.plt sections
  kselftest/arm64: Fix check_user_mem test
  kselftest/arm64: Fix check_ksm_options test
  kselftest/arm64: Fix check_mmap_options test
  kselftest/arm64: Fix check_child_memory test
  kselftest/arm64: Fix check_tags_inclusion test
  kselftest/arm64: Fix check_buffer_fill test
  arm64: avoid -Woverride-init warning
  KVM: arm64: ARM_SMCCC_ARCH_WORKAROUND_1 doesn't return SMCCC_RET_NOT_REQUIRED
  arm64: vdso32: Allow ld.lld to properly link the VDSO
2020-10-30 13:16:03 -07:00
Linus Torvalds 65b55d4c85 ARM: SoC fixes for v5.10
This is a fairly large set of bug fixes on top of -rc1,
 as most of them were ready but didn't quite make it into
 the last-minute pull requests for the merge window.
 
 Allwinner:
 	Fix for incorrect CPU overtemperature limit
 
 Amlogic:
 	Multiple smaller DT bugfixes, and missing device nodes
 
 Marvell EBU:
 	Add missing aliases for ethernet switch ports on
 	espressobin board
 
 Marvell MMP:
 	One DTC warning fix
 	one bugfix for camera interface power-down
 
 NXP i.MX:
 	Re-enable the GPIO driver on all defconfigs
 
 ST STM32MP1:
 	Fix random crashes from incorrect voltage settings
 
 Synaptics Berlin:
 	Enable the correct hardware timer driver
 
 Texas Instruments K2G:
 	fix a boot regression in the power domain code
 
 TEE drivers:
 	Fix regression in TEE "login" method
 
 SCMI drivers:
 	multiple code fixes for corner cases in newly added code
 
 MAINTAINERS file:
 	Move Kukjin Kim and Sangbeom Kim used to work on
 	Samsung Exynos.
 	Masahiro Yamada is stepping down as Uniphier maintainer
 
 I did not include a series of patches that work around a
 regression caused by a bugfix in an ethernet phy driver
 that resulted in an inadvertent DT binding change. This is
 still under discussion.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl+cPisACgkQmmx57+YA
 GNndoQ/+OGlE6x78OzveTbwr0uAGI5QMFnUu6y94ju9wmHJQ4s88UwIvMf5a1ATX
 QxR3F8e+ywhKklRZiGlJoQhc87NOtFOnQduwtrQmwj71r+3deFRfXv+ExYFtHQnK
 1kj1fG7MuvQfw1BYg6FIUkhKAjuNh3tsz5SIkFbpT1QhPJVOimb4Vkda+MEQTTCL
 i/YQFk+j1tqYXqjR2JiQTxEDgIWkSb02toyZUstC6nEt7mneAKETYyMMd5rctf+i
 ZOP9pMoXNLtC/DSYfZrMj8oYX+96p6YdfiqS8wGELuIgcXh99ArOMlk/4ZeGz1PW
 Wq2q97r0qXA5BNUFBW5ZA3PDbT+FchBlqAnKpI7PZZYU5RNb40AMXHjxiGi6sIKd
 TBykUDjYTTiOIinxLzf6nJ6Sv/0yQEo2+IZImE/s7qJYQKC1fRw01O897ee7AI2G
 Xzs2TGL4h/1Mce1hhwce15ZWmy3GRleBJj1gFd8/iCmaXdKAMB7WMO3J7xTeoUnX
 JUBzFZ67hTGugLdrshr/pOncO9ZoX4U11ybkrDGsLjT+8kE8erEGzWn2IHCj9yTv
 gxQclxCBYYygA2MzHFO70hKnklfhtZKQzs00UrJZTqB2AjBdBA4sJecYzfExLEdd
 AVsRz5n5XsE/ahb/MC1fNBBPWRO9YkgvVmmrLN5XWQ+fh0fkemk=
 =cKNJ
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a fairly large set of bug fixes on top of -rc1, as most of
  them were ready but didn't quite make it into the last-minute pull
  requests for the merge window.

  Allwinner:
   - fix for incorrect CPU overtemperature limit

  Amlogic:
   - multiple smaller DT bugfixes, and missing device nodes

  Marvell EBU:
   - add missing aliases for ethernet switch ports on espressobin board

  Marvell MMP:
   - DTC warning fix
   - bugfix for camera interface power-down

  NXP i.MX:
   - re-enable the GPIO driver on all defconfigs

  ST STM32MP1:
   - fix random crashes from incorrect voltage settings

  Synaptics Berlin:
   - enable the correct hardware timer driver

  Texas Instruments K2G:
   - fix a boot regression in the power domain code

  TEE drivers:
   - fix regression in TEE "login" method

  SCMI drivers:
   - multiple code fixes for corner cases in newly added code

  MAINTAINERS file:
   - move Kukjin Kim and Sangbeom Kim to credits (used to work on
     Samsung Exynos)
   - Masahiro Yamada is stepping down as Uniphier maintainer

  I did not include a series of patches that work around a regression
  caused by a bugfix in an ethernet phy driver that resulted in an
  inadvertent DT binding change. This is still under discussion"

* tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
  soc: ti: ti_sci_pm_domains: check for proper args count in xlate
  ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board
  ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board
  ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC
  ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC
  ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"
  ARM: dts: mmp3: Add power domain for the camera
  arm64: berlin: Select DW_APB_TIMER_OF
  dt-bindings: sram: sunxi-sram: add V3s compatible string
  MAINTAINERS: Move Sangbeom Kim to credits
  MAINTAINERS: Move Kukjin Kim to credits
  MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver
  ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default
  ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default
  arm64: defconfig: Build in CONFIG_GPIO_MXC by default
  arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: amlogic: add missing ethernet reset ID
  firmware: arm_scmi: Fix duplicate workqueue name
  firmware: arm_scmi: Fix locking in notifications
  ...
2020-10-30 13:06:07 -07:00
Takashi Iwai d383b3146d KVM: x86: Fix NULL dereference at kvm_msr_ignored_check()
The newly introduced kvm_msr_ignored_check() tries to print error or
debug messages via vcpu_*() macros, but those may cause Oops when NULL
vcpu is passed for KVM_GET_MSRS ioctl.

Fix it by replacing the print calls with kvm_*() macros.

(Note that this will leave vcpu argument completely unused in the
 function, but I didn't touch it to make the fix as small as
 possible.  A clean up may be applied later.)

Fixes: 12bc2132b1 ("KVM: X86: Do the same ignore_msrs check for feature msrs")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178280
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-Id: <20201030151414.20165-1-tiwai@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-30 13:40:31 -04:00
Paolo Bonzini 8a967d655e KVM: x86: replace static const variables with macros
Even though the compiler is able to replace static const variables with
their value, it will warn about them being unused when Linux is built with W=1.
Use good old macros instead, this is not C++.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-30 13:39:55 -04:00