Fix/change module_param permissions parameter from an init value
to a permission value.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix up some PA-RISC work items broken by the workstruct reduction.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
If we separate out LASI and ASP support later, we'll need this.
Plus, this makes it consistent with the ncr700 scsi driver.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Firmware ignores Cardbus bridges, so when Linux assigns bus numbers,
it must override firmware's notion of what the busses are numbered.
This is not sufficient to support the Cardbus bridge as there is also
no interrupt routing table entry for them.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Willy pointed out the hversion is already stored
in the parisc_device, so I do not need to extract
this information directly from the IODC data.
Also by using the information in the parisc_device
I can avoid re-reading the IODC data for the Muxes
with specifed port counts.
Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This patch adds a new function to return the actual number
of ports available. Some of the built-in Muxes return the
number of supported ports, but not all of these port are
available for use.
Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This patch follows the example of the 8250_gsc
driver by probing for specific built-in Mux
cards first. This allows the system to preserve
the correct detection order with multiple Mux
cards.
Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
The following updates are based off a patch from willy:
* Removal of the mux_card list.
* Add the mux_remove function.
Other updates:
* Re-organize the driver structure a bit to make the
mux_init and mux_exit functions more symmetrical.
* Added the del_timer.
* Unregistered the console.
At this point I can insmod, rmmod, and re-insmod the
mux without any failures.
Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This patch claims the iomem resources
for the Mux driver.
Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This patch changes the Mux console to
use the Mux hardware instead of the PDC
Software console.
Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This patch addresses the following issues:
* Removes an incorrect comment.
* Fixes a couple of compiler warnings.
* Properly detects the HP-PB bus on E-Class systems.
Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This patch fixes the ccio_request_resource to work properly when
the CONFIG_IOMMU_CCIO is not defined. This patch was tested on
my E35.
Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
The `simple' way of walking and checking PageReserved is broken on
discontigmem, instead we need to check each range explicitly.
(Also rename a few things so they make more sense.)
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
I deleted this file from 2.4 5 years ago. Unfortunately, that change
never got merged to Linus and so when we switched to 2.5 it came back
and nobody noticed. It's never been built in 2.5/2.6 as it was never
in the Makefile.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (55 commits)
ieee1394: sbp2: code formatting around work_struct stuff
ieee1394: nodemgr: remove a kcalloc
ieee1394: conditionally export ieee1394_bus_type
ieee1394: Consolidate driver registering
ieee1394: sbp2: convert from PCI DMA to generic DMA
ieee1394: nodemgr: spaces to tabs
ieee1394: nodemgr: fix deadlock in shutdown
ieee1394: nodemgr: remove duplicate assignment
sbp2: make 1bit bitfield unsigned
ieee1394: schedule *_oui sysfs attributes for removal
ieee1394: schedule unused symbol exports for removal
ieee1394: dv1394: schedule for feature removal
ieee1394: raw1394: defer feature removal of old isoch interface
ieee1394: ohci1394: call PMac code in shutdown only for proper machines
ieee1394: ohci1394: reformat PPC_PMAC platform code
ieee1394: ohci1394: add PPC_PMAC platform code to driver probe
ieee1394: sbp2: wrap two functions into one
ieee1394: sbp2: update comment on things to do
ieee1394: sbp2: use list_move_tail()
ieee1394: sbp2: more concise names for types and variables
...
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits)
[ARM] 4002/1: S3C24XX: leave parent IRQs unmasked
[ARM] 4001/1: S3C24XX: shorten reboot time
[ARM] 3983/2: remove unused argument to __bug()
[ARM] 4000/1: Osiris: add third serial port in
[ARM] 3999/1: RX3715: suspend to RAM support
[ARM] 3998/1: VR1000: LED platform devices
[ARM] 3995/1: iop13xx: add iop13xx support
[ARM] 3968/1: iop13xx: add iop13xx_defconfig
[ARM] Update mach-types
[ARM] Allow gcc to optimise arm_add_memory a little more
[ARM] 3991/1: i.MX/MX1 high resolution time source
[ARM] 3990/1: i.MX/MX1 more precise PLL decode
[ARM] 3986/1: H1940: suspend to RAM support
[ARM] 3985/1: ixp4xx clocksource cleanup
[ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2)
[ARM] 3994/1: ixp23xx: fix handling of pci master aborts
[ARM] 3981/1: sched_clock for PXA2xx
[ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit
[ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period
[ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter
...
* 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] replace kmalloc+memset with kzalloc
[IA64] resolve name clash by renaming is_available_memory()
[IA64] Need export for csum_ipv6_magic
[IA64] Fix DISCONTIGMEM without VIRTUAL_MEM_MAP
[PATCH] Add support for type argument in PAL_GET_PSTATE
[IA64] tidy up return value of ip_fast_csum
[IA64] implement csum_ipv6_magic for ia64.
[IA64] More Itanium PAL spec updates
[IA64] Update processor_info features
[IA64] Add se bit to Processor State Parameter structure
[IA64] Add dp bit to cache and bus check structs
[IA64] SN: Correctly update smp_affinty mask
[IA64] sparse cleanups
[IA64] IA64 Kexec/kdump
Merge:
Atmel AT91RM9200 and AT91SAM9260 changes
General ARM developments
Disconfiguous memory cleanups
64-bit/32-bit division and sched_clock extension patches
EP93xx support changes
IOP support changes
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Do not bother masking/unmasking the parent IRQ
for the mulitplexed EINT irqs, as masking the
leaf seems to be fine.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cut down the time between requesting a reboot
and actually getting the reboot to happen by
a quarter.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The current code (prior to this change) would disable the PCI INTx
legacy interrupt when enabling MSI... but only on PCI Express. We
should do this for all MSI devices, for safety's sake.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
It appears that include/asm-arm/bug.h requires include/linux/stddef.h
for the definition of NULL. It seems that stddef.h was always included
indirectly in most cases, and that issue was properly fixed a while ago.
Then commit 5047f09b56 incorrectly reverted
change from commit ff10952a54 (bad dwmw2)
and the problem recently resurfaced.
Because the third argument to __bug() is never used anyway, RMK suggested
getting rid of it entirely instead of readding #include <linux/stddef.h>
which this patch does.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add the mapping for the third S3C2440 serial
port into the default serial devices for the
Osiris.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The RX3715 is similar to the H1940 in the way
that suspend to RAM works, so we can use most
of the extant support for the H1940 with only
a few modifictions
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Support for the GPIO attached LEDs on the VR1000
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Follow-up to patch "Consolidate driver registering":
Since I plan the lifetime of Linux 2.6.20 to be the deprecation phase
of CONFIG_IEEE1394_EXPORT_FULL_API, it seems fair to keep all previously
exported symbols available with this option until this phase is over.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
This patch consolidates some bookkeeping for driver registering. It
closely models what pci_register_driver() does. The main addition is
that the owner of the driver is set, so we get a proper symlink
for /sys/bus/ieee1394/driver/*/module.
Also moves setting of name and bus type into nodemgr. Because of this,
we can remove the EXPORT_SYMBOL for ieee1394_bus_type, since it's now
only used in ieee1394.ko.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
If "modprobe ohci1394" was quickly followed by "modprobe -r ohci1394",
say with 1 second pause in between, the modprobe -r got stuck in
uninterruptible sleep in kthread_stop. At the same time the knodemgrd
slept uninterruptibly in bus_rescan_devices_helper. That's because
driver_detach took the semaphore of the PCI device and
bus_rescan_devices_helper wanted to take the semaphore of the FireWire
host device's parent, which is the same semaphore. This was a regression
since Linux 2.6.16, commit bf74ad5bc4,
"Hold the device's parent's lock during probe and remove".
The fix (or workaround) adds a dummy driver to the hpsb_host device. Now
bus_rescan_devices_helper won't scan the host device anymore. This
doesn't hurt since we have no drivers which will bind to these devices
and it is unlikely that there will ever be such a driver. The dummy
driver is befittingly presented as a representation of ieee1394 itself.
Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=6706
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
A signed single-bit bitfield doesn't make much sense. Make it unsigned.
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Randy Dunlap
Kyle McMartin
Kyle McMartin
David Howells
Mariusz Kozlowski
Grant Grundler
Matthew Wilcox
Helge Deller
Ryan Bradetich
Ryan Bradetich
Ryan Bradetich
Linus Torvalds
Russell King
Ben Dooks
Jeff Garzik
Nicolas Pitre
Stefan Richter
Ben Collins
Luca Tettamanti