The boot GDT entries are common between 32- and 64-bit mode, so move
them to common code instead of having two identical copies.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
get_segment_eip has similarities to convert_rip_to_linear(),
and is used in a similar context. Move get_segment_eip to
step.c to allow easier consolidation.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move out tick_nohz_stop_sched_tick() call from the loop in cpu_idle
same as 32-bit version.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
introduce the "asmregparm" calling convention: for functions
implemented in assembly with a fixed regparm input parameters
calling convention.
mark the semaphore and rwsem slowpath functions with that.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This implements ticket lock support for more than 255 CPUs on x86. The
code gets switched according to the configured NR_CPUS.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the fixup_exception() helper instead of the open-coded
search_extable() users.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Should be the last of the error_code tests that could use
the PF_ defines. Makes X86_32|64 a little closer.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Small step towards unifying traps_32|64.c. No functional
changes. Pull out a small helper from an if() statement
in die().
Marked as __kprobes as eventually we will want to call this
from do_page_fault similar to how X86_64 does it.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The machine check handler registers ioctl handler that is called
with the BKL held. Changing to register unlocked_ioctl instead.
Also mce ioctl handler does not seem to need any lock protection.
To: Andi Kleen <andi@firstfloor.org>
Cc: linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org
Change the Machine check handler to use unlocked_ioctl instead of
ioctl handler. Also the mce ioctl handler does not need any lock
protection.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When the _PAGE_FOO constants are defined as (1ul << _PAGE_BIT_FOO), they
become unsigned longs. In 32-bit PAE mode, these end up being
implicitly cast to 64-bit types when used to manipulate a pte, and
because they're unsigned the top 32-bits are 0, destroying the upper
bits of the pte.
When _PAGE_FOO constants are given a signed integer type, the cast to
64-bits will sign-extend so that the upper bits are all ones,
preserving the upper pte bits in manipulations.
Explain this in a prominent place.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The hypervisor doesn't allow PCD or PWT to be set on guest ptes, so
make sure they're masked out. Also, fix up some previous mispatching.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Put all the defines for mapping pagetable operations to their native
versions (for the non-paravirt case) into one place. Make the
corresponding changes to paravirt.h.
The tricky part here is that when a pagetable entry can't be updated
atomically (ie, 32-bit PAE), we need special handlers for pte_clear,
set_pte_atomic and set_pte_present. However, the other two modes
don't need special handling for these, and can use a common
set_pte(_at) path.
[ mingo@elte.hu: fixes ]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move ZERO_PAGE/empty_zero_page to common place.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
&ptep->pte isn't always an unsigned long *, so cast it to avoid a warning.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make various pte accessors common.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix various compilation problems as a result of changing pte_t.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make sure pte_t, whatever its definition, has a pte element with type
pteval_t. This allows common code to access it without needing to be
specifically parameterised on what pagetable mode we're compiling for.
For 32-bit, this means that pte_t becomes a union with "pte" and "{
pte_low, pte_high }" (PAE) or just "pte_low" (non-PAE).
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
based on:
Subject: x86: unify pgtable accessors which use supported_pte_mask
From: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make users of supported_pte_mask common. This has the side-effect of
introducing the variable for 32-bit non-PAE, but I think its a pretty
small cost to simplify the code.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In 32-bit PAE, mask NX from pte_pfn, since it isn't part of the PFN.
This code is due for unification anyway, but this fixes a latent bug.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Unify functions to test and set bits in pagetable entries.
NOP: only moves existing code around, without any change to it.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
add new ops to 32-bit.
based on:
Subject: x86/pgtable: unify pagetable accessors
From: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
change the pte_mk inlines to the unified format. Non-NOP!
based on:
Subject: x86/pgtable: unify pagetable accessors
From: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
change the pte_dirty/* inlines to the unified format. Non-NOP!
based on:
Subject: x86/pgtable: unify pagetable accessors
From: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
based on:
Subject: x86/pgtable: unify pagetable accessors
From: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
based on:
Subject: x86/pgtable: fix constant sign extension problem
From: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Avoid a conflict between Voyager's leave_mm and asm-x86/mmu.h's leave_mm.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
32 and 64-bit use the same flags for pagetable entries, so make them all common.
[ mingo@elte.hu: fixes ]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
add PWT bit to NOCACHE flags. No real difference to CPUs, but needed
later for PAT.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix one error reported by checkpatch,
it now reports:
total: 0 errors, 0 warnings, 42 lines checked
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On 32-bit NUMA, the memmap representing struct pages on each node is
allocated from node-local memory if possible. As only node-0 has memory from
ZONE_NORMAL, the memmap must be mapped into low memory. This is done by
reserving space in the Kernel Virtual Area (KVA) for the memmap belonging
to other nodes by taking pages from the end of ZONE_NORMAL and remapping
the other nodes memmap into those virtual addresses. The node boundaries
are then adjusted so that the region of pages is not used and it is marked
as reserved in the bootmem allocator.
This reserved portion of the KVA is PMD aligned althought
strictly speaking that requirement could be lifted (see thread at
http://lkml.org/lkml/2007/8/24/220). The problem is that when aligned, there
may be a portion of ZONE_NORMAL at the end that is not used for memmap and
does not have an initialised memmap nor is it marked reserved in the bootmem
allocator. Later in the boot process, these pages are freed and a storm of
Bad page state messages result.
This patch marks these pages reserved that are wasted due to alignment
in the bootmem allocator so they are not accidently freed. It is worth
noting that memory from node-0 is wasted where it could have been put into
ZONE_HIGHMEM on NUMA machines. Worse, the KVA is always reserved from the
location of real memory even when there is plenty of spare virtual address
space.
This patch also makes sure that reserve_bootmem() is not called with a
0-length size in numa_kva_reserve(). When this happens, it usually means
that a kernel built for Summit is being booted on a normal machine. The
resulting BUG_ON() is misleading so it is caught here.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Return the size of bts_struct in the PTRACE_BTS_STATUS command.
Change types to u32.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Unify arch/x86/kernel/acpi/sleep*.c
Pretty trivial unification; when two functions differed, it was
usually in error handling, and better of the two was picked up.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Here is a quick and naive smoke test for kprobes. This is intended to
just verify if some unrelated change broke the *probes subsystem. It is
self contained, architecture agnostic and isn't of any great use by itself.
This needs to be built in the kernel and runs a basic set of tests to
verify if kprobes, jprobes and kretprobes run fine on the kernel. In case
of an error, it'll print out a message with a "BUG" prefix.
This is a start; we intend to add more tests to this bucket over time.
Thanks to Jim Keniston and Masami Hiramatsu for comments and suggestions.
Tested on x86 (32/64) and powerpc.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Form a single percpu.h from percpu_32.h and percpu_64.h. Both are now pretty
small so this is simply adding them together.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86_64 provides an optimized way to determine the local per cpu area
offset through the pda and determines the base by accessing a remote
pda.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86_32 only provides a special way to obtain the local per cpu area offset
via x86_read_percpu. Otherwise it can fully use the generic handling.
Cc: ak@suse.de
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- add support for PER_CPU_ATTRIBUTES
- fix generic smp percpu_modcopy to use per_cpu_offset() macro.
Add the ability to use generic/percpu even if the arch needs to override
several aspects of its operations. This will enable the use of generic
percpu.h for all arches.
An arch may define:
__per_cpu_offset Do not use the generic pointer array. Arch must
define per_cpu_offset(cpu) (used by x86_64, s390).
__my_cpu_offset Can be defined to provide an optimized way to determine
the offset for variables of the currently executing
processor. Used by ia64, x86_64, x86_32, sparc64, s/390.
SHIFT_PTR(ptr, offset) If an arch defines it then special handling
of pointer arithmentic may be implemented. Used
by s/390.
(Some of these special percpu arch implementations may be later consolidated
so that there are less cases to deal with.)
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Special consideration for IA64: Add the ability to specify
arch specific per cpu flags
- remove .data.percpu attribute from DEFINE_PER_CPU for non-smp case.
The arch definitions are all the same. So move them into linux/percpu.h.
We cannot move DECLARE_PER_CPU since some include files just include
asm/percpu.h to avoid include recursion problems.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The use of the __GENERIC_PERCPU is a bit problematic since arches
may want to run their own percpu setup while using the generic
percpu definitions. Replace it through a kconfig variable.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The boot protocol has until now required that the initrd be located in
lowmem, which makes the lowmem/highmem boundary visible to the boot
loader. This was exported to the bootloader via a compile-time
field. Unfortunately, the vmalloc= command-line option breaks this
part of the protocol; instead of adding yet another hack that affects
the bootloader, have the kernel relocate the initrd down below the
lowmem boundary inside the kernel itself.
Note that this does not rely on HIGHMEM being enabled in the kernel.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch export the boot parameters via debugfs for debugging.
The files added are as follow:
boot_params/data : binary file for struct boot_params
boot_params/version : boot protocol version
This patch is based on 2.6.24-rc5-mm1 and has been tested on i386 and
x86_64 platform.
This patch is based on the Peter Anvin's proposal.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
reboot_{32|64}.c unification patch.
This patch unifies the code from the reboot_32.c and reboot_64.c files.
It has been tested in computers with X86_32 and X86_64 kernels and it
looks like all reboot modes work fine (EFI restart system hasn't been
tested yet).
Probably I made some mistakes (like I usually do) so I hope
we can identify and fix them soon.
Signed-off-by: Miguel Boton <mboton@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Unlike oopses, WARN_ON() currently does't print the loaded modules list.
This makes it harder to take action on certain bug reports. For example,
recently there were a set of WARN_ON()s reported in the mac80211 stack,
which were just signalling a driver bug. It takes then anther round trip
to the bug reporter (if he responds at all) to find out which driver
is at fault.
Another issue is that, unlike oopses, WARN_ON() doesn't currently printk
the helpful "cut here" line, nor the "end of trace" marker.
Now that WARN_ON() is out of line, the size increase due to this is
minimal and it's worth adding.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin
Harvey Harrison
Hiroshi Shimamoto
Ingo Molnar
Nick Piggin
Paolo Ciarrocchi
Nikanth Karthikesan
Jeremy Fitzhardinge
Mel Gorman
Markus Metzger
Pavel Machek
Ananth N Mavinakayanahalli
travis@sgi.com
Huang, Ying
Miguel Boton
Arjan van de Ven