The amount of changes is smaller at this round (what a surprise),
but lots of activity is seen. Most of changes are about ASoC
driver development, especially Intel platforms.
Here are some highlights:
General:
* Replace all tasklet usages with other alternatives
* Cleanup of the ASoC error unwinding code
* Fixes for trivial issues caught by static checker
* Spell fixes allover the places
ALSA Core:
* Lockdep fix for control devices
* Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
* SoundBlaster AE-7 support
* Changes in quirk table for the rename handling
* Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
* Lots of updates for Intel SOF and SoundWire enablement
* Replacement of the DSP driver for some older x86 systems;
the new code was written from scratch, better maintenance
expected
* Helpers for parsing auxiluary devices from the device tree
* New support for AllWinner A64, Cirrus Logic CS4234, Mediatek
MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P,
and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764
-----BEGIN PGP SIGNATURE-----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=nWAp
-----END PGP SIGNATURE-----
Merge tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The amount of changes is smaller at this round (what a surprise), but
lots of activity is seen. Most of changes are about ASoC driver
development, especially Intel platforms. Here are some highlights:
General:
- Replace all tasklet usages with other alternatives
- Cleanup of the ASoC error unwinding code
- Fixes for trivial issues caught by static checker
- Spell fixes allover the places
ALSA Core:
- Lockdep fix for control devices
- Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
- SoundBlaster AE-7 support
- Changes in quirk table for the rename handling
- Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
- Lots of updates for Intel SOF and SoundWire enablement
- Replacement of the DSP driver for some older x86 systems; the new
code was written from scratch, better maintenance expected
- Helpers for parsing auxiluary devices from the device tree
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764"
* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
ALSA: hda: fix jack detection with Realtek codecs when in D3
ALSA: fireworks: use semicolons rather than commas to separate statements
ALSA: hda: use semicolons rather than commas to separate statements
ALSA: hda/i915 - fix list corruption with concurrent probes
ASoC: dmaengine: Document support for TX only or RX only streams
ASoC: mchp-spdiftx: remove 'TX' from playback stream name
ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
ASoC: tas2764: Add the driver for the TAS2764
dt-bindings: tas2764: Add the TAS2764 binding doc
ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
ASoC: stm32: dfsdm: add actual resolution trace
ASoC: stm32: dfsdm: change rate limits
ASoC: qcom: sc7180: Add support for audio over DP
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass:Update lpaif_dmactl members order
Asoc:qcom:lpass-cpu:Update dts property read API
ASoC: dt-bindings: Add dt binding for lpass hdmi
...
Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A
/bTQ42c/WRQ+LU828GSM
=6sO2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
binder: fix UAF when releasing todo list
docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
misc: Kconfig: fix a HISI_HIKEY_USB dependency
LSM: Fix type of id parameter in kernel_post_load_data prototype
misc: Kconfig: add a new dependency for HISI_HIKEY_USB
firmware_loader: fix a kernel-doc markup
w1: w1_therm: make w1_poll_completion static
binder: simplify the return expression of binder_mmap
test_firmware: Test partial read support
firmware: Add request_partial_firmware_into_buf()
firmware: Store opt_flags in fw_priv
fs/kernel_file_read: Add "offset" arg for partial reads
IMA: Add support for file reads without contents
LSM: Add "contents" flag to kernel_read_file hook
module: Call security_kernel_post_load_data()
firmware_loader: Use security_post_load_data()
LSM: Introduce kernel_post_load_data() hook
fs/kernel_read_file: Add file_size output argument
fs/kernel_read_file: Switch buffer size arg to size_t
fs/kernel_read_file: Remove redundant size argument
...
Stress tests show that DSP may occasionally be late with signaling WAIT
state when all pins are made use of simultaneously plus start/stop
(pause) gets involved. While this isn't tied to standard audio scenarios
where only System Pin (playback and capture) is involved, ensure user is
not hindered when playing with more advanced scenarios.
>From DSP perspective, clock acts as a resource: low clock equals less
resources, high clock more resources. Relax clock selection procedure so
only low -> high switch is allowed when awaiting WAIT signal times out.
Once active stream count decreases, DSP will have more time internally to
adjust thus low clock selection becomes possible again.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201012103221.30759-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
catpt_dai_pcm_new() invoked during new PCM runtime creation configures
SSP by sending IPC to DSP firmware. For that to succeed device needs to
be up and running. While components default probing behavior -
snd_soc_catpt causing machine board module to load just after it - needs
no changes, machine board's module may be unloaded and re-loaded at a
different time e.g.: when catpt is already asleep.
Wake device explicitly in catpt_dai_pcm_new() to ensure communication is
established before sending any IPCs, enabling those advanced scenarios
in the process.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201012103221.30759-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SST_IPC and its _PCI and _ACPI variants all target
sound/soc/intel/atom solution alone. SND_SST_IPC is the core component,
required for PCI and ACPI based atom platforms both. _PCI and _ACPI
target Merrifield/Edison and Baytrial/Cherrytrail platforms
respectively.
On top of that, there is an equivalent set of configs targeting the same
solution:
- SND_SST_ATOM_HIFI2_PLATFORM (core)
- SND_SST_ATOM_HIFI2_PLATFORM_PCI
- SND_SST_ATOM_HIFI2_PLATFORM_ACPI
As both sets do the same job - allow for granular platform selection -
remove the duplicate set and rely on SND_SST_ATOM_HIFI2_PLATOFRM_XXX
configs alone.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201012095005.29859-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A race exists between closing a PCM and update of ELD data. In
hdmi_pcm_close(), hinfo->nid value is modified without taking
spec->pcm_lock. If this happens concurrently while processing an ELD
update in hdmi_pcm_setup_pin(), converter assignment may be done
incorrectly.
This bug was found by hitting a WARN_ON in snd_hda_spdif_ctls_assign()
in a HDMI receiver connection stress test:
[2739.684569] WARNING: CPU: 5 PID: 2090 at sound/pci/hda/patch_hdmi.c:1898 check_non_pcm_per_cvt+0x41/0x50 [snd_hda_codec_hdmi]
...
[2739.684707] Call Trace:
[2739.684720] update_eld+0x121/0x5a0 [snd_hda_codec_hdmi]
[2739.684736] hdmi_present_sense+0x21e/0x3b0 [snd_hda_codec_hdmi]
[2739.684750] check_presence_and_report+0x81/0xd0 [snd_hda_codec_hdmi]
[2739.684842] intel_audio_codec_enable+0x122/0x190 [i915]
Fixes: 42b2987079 ("ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201013152628.920764-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Not a huge amount going on in the core for ASoC this time but quite a
lot of driver activity, especially for the Intel platforms:
- Replacement of the DSP driver for some older x86 systems with a new
one which was written with closer reference to the DSP firmware so
should hopefully be more robust and maintainable.
- A big batch of static checker and other fixes for the rest of the x86
DSP drivers.
- Cleanup of the error unwinding code from Morimoto-san, hopefully
making it more robust.
- Helpers for parsing auxiluary devices from the device tree from
Stephan Gerhold.
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+EToAACgkQJNaLcl1U
h9AVGwgAghl0dybTqjd1G0i0qOK5AXAdgZaDSstOI++xAd50i0LHlkEMN8/XTcMB
vks1Nt3NIF7E0DAECZ93ZMA3tSJItIuq4RPjFLBbQz7550xIA9G/h1ff9+piltmi
8M2HREH1J2z8HflSW5ZPy9sN0Vk71utni984WO/OI6tvWt2CxTTkOM6nt6p4TsKp
EIHU2rrxeZ+fh+qJrf3WXCsI3CCFAFtADYQO8LCNrZDkmosqRLDNQY/88C1Gy/Zo
d8SM2wrjc+BHDdxA3xSQxZmOq7XCe/7+fTluDYpoci9MvtL6QdlgfH2kqAwtqxRB
BG58pVJDGrW/68rRHUNl5ti4JL9F0g==
=4ONt
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.10
Not a huge amount going on in the core for ASoC this time but quite a
lot of driver activity, especially for the Intel platforms:
- Replacement of the DSP driver for some older x86 systems with a new
one which was written with closer reference to the DSP firmware so
should hopefully be more robust and maintainable.
- A big batch of static checker and other fixes for the rest of the x86
DSP drivers.
- Cleanup of the error unwinding code from Morimoto-san, hopefully
making it more robust.
- Helpers for parsing auxiluary devices from the device tree from
Stephan Gerhold.
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764
In case HDA controller becomes active, but codec is runtime suspended,
jack detection is not successful and no interrupt is raised. This has
been observed with multiple Realtek codecs and HDA controllers from
different vendors. Bug does not occur if both codec and controller are
active, or both are in suspend. Bug can be easily hit on desktop systems
with no built-in speaker.
The problem can be fixed by powering up the codec once after every
controller runtime resume. Even if codec goes back to suspend later, the
jack detection will continue to work. Add a flag to 'hda_codec' to
describe codecs that require this flow from the controller driver.
Modify __azx_runtime_resume() to use pm_request_resume() to make the
intent clearer.
Mark all Realtek codecs with the new forced_resume flag.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209379
Cc: Kailang Yang <kailang@realtek.com>
Co-developed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201012102704.794423-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/1602407979-29038-5-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current hdac_i915 uses a static completion instance to wait
for i915 driver to complete the component bind.
This design is not safe if multiple HDA controllers are active and
communicating with different i915 instances, and can lead to list
corruption and failed audio driver probe.
Fix the design by moving completion mechanism to common acomp
code and remove the related code from hdac_i915.
Fixes: 7b882fe3e3 ("ALSA: hda - handle multiple i915 device instances")
Co-developed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201006161722.500256-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We intentionally do not return an error if we get a permanent failure
from dma_request_chan() in order to support systems which have TX only
or RX only channels. Add a comment documenting this.
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20201008161105.21804-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Widening of the supported rate range in the STM32 DFSDM driver.
The rates were previously limited to 8kHz, 16kHz and 32kHz.
Allow rate capture in the whole range 8kHz-48kHz as there is no hardware
limitation to support it.
Actual sample resolution is dependent on audio rate and DFSDM configuration.
Add a trace to allow simple check of sample resolution.
Olivier Moysan (2):
ASoC: stm32: dfsdm: change rate limits
ASoC: stm32: dfsdm: add actual resolution trace
drivers/iio/adc/stm32-dfsdm-adc.c | 4 ++++
drivers/iio/adc/stm32-dfsdm.h | 2 ++
sound/soc/stm/stm32_adfsdm.c | 8 +++-----
3 files changed, 9 insertions(+), 5 deletions(-)
--
2.17.1
These patches are to support audio over DP port on Qualcomm's SC7180 LPASS
Asoc. It includes machine driver, cpu driver, platform driver updates for
HDMI path support, device tree documention, lpass variant structure
optimization and configuration changes.
These patches depends on the DP patch series
https://patchwork.kernel.org/project/dri-devel/list/?series=332029https://lore.kernel.org/patchwork/project/lkml/list/?series=464856
changes since V10:
-- Moved hdmi regmap functions from lpass-hdmi.c to lpass-cpu.c
-- Moved QCOM_REGMAP_FIELD_ALLOC macro from lpass-hdmi.c to lpass.h
changes since V9:
-- Removed unused structures lpass_hdmi.h
changes since V8:
-- Removed redundant structure wrapper for reg map field memebrs
-- Updated lpass_hdmi_regmap_volatile API with appropriate registers as true
and others as false.
changes since V7:
-- Fixed typo errors
-- Created Separate patch for buffer size change
changes since V6:
-- Removed compile time define flag, which used for enabling
HDMI code, based on corresponding config param is included.
-- Updated reg map alloc API with reg map bulk API.
-- Removed unnecessary line splits
changes since V5:
-- Removed unused struct regmap *map in lpass_platform_alloc_hdmidmactl_fields.
-- DMA alloc and free API signature change in lpass-apq8016.c, lpass-ipq806x.c
-- Keeping API "irqreturn_t lpass_platform_hdmiif_irq" under ifdef macro
Changes Since v4:
-- Updated with single compatible node for both I2S and HDMI.
Changes Since v3:
-- Removed id in lpass variant structure and used snd_soc_dai_driver id.
Changes Since v2:
-- Audio buffer size(i.e. LPASS_PLATFORM_BUFFER_SIZE) in lpass-platform.c increased.
Changes Since v1:
-- Commit messages are updated
-- Addressed Rob Herring review comments
V Sujith Kumar Reddy (7):
ASoC: Add sc7180-lpass binding header hdmi define
ASoC: dt-bindings: Add dt binding for lpass hdmi
Asoc:qcom:lpass-cpu:Update dts property read API
Asoc: qcom: lpass:Update lpaif_dmactl members order
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: sc7180: Add support for audio over DP
.../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 74 ++--
include/dt-bindings/sound/sc7180-lpass.h | 1 +
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/Makefile | 2 +
sound/soc/qcom/lpass-apq8016.c | 4 +-
sound/soc/qcom/lpass-cpu.c | 249 ++++++++++++-
sound/soc/qcom/lpass-hdmi.c | 258 ++++++++++++++
sound/soc/qcom/lpass-hdmi.h | 102 ++++++
sound/soc/qcom/lpass-ipq806x.c | 4 +-
sound/soc/qcom/lpass-lpaif-reg.h | 49 ++-
sound/soc/qcom/lpass-platform.c | 395 +++++++++++++++++----
sound/soc/qcom/lpass-sc7180.c | 116 +++++-
sound/soc/qcom/lpass.h | 124 ++++++-
13 files changed, 1240 insertions(+), 143 deletions(-)
create mode 100644 sound/soc/qcom/lpass-hdmi.c
create mode 100644 sound/soc/qcom/lpass-hdmi.h
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
At this point mcasp->dev is not initialized and we would have NULL pointer
dereference if we would have failed to get the mem memory resource by
name.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201008085400.19944-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce the Texas Instruments TAS2764 amplifier driver
with I/V sense for loud speaker applications.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20201007155341.10139-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
module_is_live() is available only when CONFIG_MODULES is enabled.
Replace its usage with try_module_get() which is present regardless of
said config's status.
Fixes: 7a10b66a5d ("ASoC: Intel: catpt: Device driver lifecycle")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201007135701.20372-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DFSDM can support a larger rate range than currently
supported in driver.
Increase rate upper limit to 48kHz and allow all rates
in the range 8kHz to 48kHz.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20201007153459.22155-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for audio playback over DP in lpass
sc7180 platform driver. Update lpass_variant
structure for hdmi data configuaration.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-8-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Upadate lpass cpu and platform driver to support audio over dp.
Also add lpass-hdmi.c and lpass-hdmi.h.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-6-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the lpaif_dmactl struct members order to match
HDMI reg map members sequence. Separate Interface reg map
as it is used for I2S control but not for HDMI control,
to make use of bulk API, which makes code more readable.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-5-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update dts property read API call with platform get property
by name, as it make code more readable and avoid conflicts
when array of properties to be used.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-4-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On a HP ZCentral, the front Mic could not be detected.
The codec of the HP ZCentrol is alc671 and it needs to override the pin
configuration to enable the headset mic.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201008105645.65505-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The "count" variable needs to be capped on every path so that we don't
copy too much information to the user.
Fixes: 618eabeae7 ("ALSA: bebob: Add hwdep interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201007074928.GA2529578@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS D700SA desktop's audio (1043:2390) with ALC887 cannot detect
the headset microphone and another headphone jack until
ALC887_FIXUP_ASUS_HMIC and ALC887_FIXUP_ASUS_AUDIO quirks are applied.
The NID 0x15 maps as the headset microphone and NID 0x19 maps as another
headphone jack. Also need the function like alc887_fixup_asus_jack to
enable the audio jacks.
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201007052224.22611-1-jhp@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201006152024.542418-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 9c34d023dc ("ASoC: omap-mcbsp: Re-arrange files for core McBSP
and Sidetone function split"), in rearranging various files, also replaced
calls to platform_get_resource_by_name() + devm_ioremap_resource() with a
single call to devm_platform_ioremap_resource_byname(). However, the
struct resource is needed as we access its members so at present a null
pointer is dereferenced. Fix by doing things the old way.
Fixes: 9c34d023dc ("ASoC: omap-mcbsp: Re-arrange files for core McBSP and Sidetone function split")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Link: https://lore.kernel.org/r/20201004102535.325547-1-alex.dewar90@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While sst_dsp_get_thread_context() is declared as solution-agnostic, it
is only used by /skylake/ solution. Majority of thread_context field
usages are direct accesses. Improve code cohesiveness and convert to
single usage model.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct sst_pdata is unused among remaining /sound/soc/intel solution so
remove it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With sound/soc/intel/haswell and /baytrail gone, registers left within
sst-dsp header are atom-specific. Relocate these to atom internal header
to make atom truely independent of sound/soc/common processing code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As sound/soc/intel/haswell and /baytrail are no more, all SST-legacy
specific constants and registers are redundant so remove them.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With redundant DSP operations removed, several fields for structures:
sst_ops, sst_addr and sst_dsp become obsolete. Remove them too.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/intel/common/ declares several helper functions for /intel/
solutions. In practice, differences between these - /haswell/ and
/skylake/ especially - led to many of the helpers being used only by a
single solution. As /skylake/ makes no use of these and /haswell/ and
/baytail/ are no more, remove the unused functions.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Skylake driver makes no use of ram_read or ram_write operation so remove
the assignments. This prepares sound/soc/common/sst-dsp* for following
removal of unused DSP operations.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sst-firmware is host to many image loading over DMA operations. Majority
of code targets sound/soc/intel/haswell solution as /baytrail/ never
switched to DMA-based firmware loading. With /haswell/ removed this code
serves no purpose. Address this redundancy.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
baytrail and haswell solutions present within sound/soc/intel are the
only users of sst-acpi componenent and with them removed it becomes
redundant so remove it too.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/intel/baytrail is a niche solution which supports limited
number of BYT products - as described by
snd_soc_acpi_intel_baytrail_legacy_machines table. For a long time it's
deprecated in favor of sound/soc/intel/atom solution with SOF providing
support for some products too effectively rendering /baytrail/ redundant.
Remove deprecated code from ASoC tree.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
byt-rt5640 is deprecated in favor of bytcr_rt5640 used by
sound/soc/intel/atom and SOF solutions both. Remove redundant machine
board and all related code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
byt-max98090 is deprecated in favor of cht-bsw-max98090 used by
sound/soc/intel/atom and SOF solutions both. Remove redundant machine
board and all related code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Newly added catpt solution found in sound/soc/intel/catpt is a direct
replacement to sound/soc/intel/haswell. It covers all features supported
by it and more - by aligning to recommended flows and requirement list
based on Windows driver equivalent. No harm is done to userspace as
catpt - similarly to haswell - loads no extenal topology files while
sharing the exact same ADSP firmware binary.
Given the above, existing haswell code is redundant so remove it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DA7219 uses I2S2 and I2S3 for input and output respectively. Commit
9e30251fb2 ("ASoC: mediatek: mt8183-da7219: support machine driver
with rt1015") introduces a bug that:
- If using I2S2 solely, MCLK to DA7219 is 256FS.
- If using I2S3 solely, MCLK to DA7219 is 128FS.
- If using I2S3 first and then I2S2, the MCLK changes from 128FS to
256FS. As a result, no sound output to the headset. Also no sound
input from the headset microphone.
Both I2S2 and I2S3 should set MCLK to 256FS. Fixes the wrong ops for
I2S3.
Fixes: 9e30251fb2 ("ASoC: mediatek: mt8183-da7219: support machine driver with rt1015")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201006101252.1890385-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series adds support the other two AIFs present in the sun8i codec,
which can be used for codec2codec DAI links.
This series first cleans up the DAPM component driver so there is an
organized place to put the new widgets. Then it fills out the DAI
driver, removing assumptions that were made for AIF1 (16 bits, 2
channels, certain clock inversions). Some new logic is required to
handle 3 DAIs and the ADC/DAC sharing the same clock. Finally, it adds
the new DAIs, and hooks them up with DAPM widgets and routes per the
hardware topology.
To minimize the number of patches in this series, related device tree
patches (increasing #sound-dai-cells, adding new DAI links) will be sent
separately.
Samuel Holland (25):
ASoC: sun8i-codec: Set up clock tree at probe time
ASoC: sun8i-codec: Swap module clock/reset dependencies
ASoC: sun8i-codec: Sort DAPM controls, widgets, and routes
ASoC: sun8i-codec: Consistently name DAPM widgets and routes
ASoC: sun8i-codec: Correct DAPM widget types
ASoC: sun8i-codec: Fix AIF widget channel references
ASoC: sun8i-codec: Enable AIF mono/stereo control
ASoC: sun8i-codec: Use snd_soc_dai_get_drvdata
ASoC: sun8i-codec: Prepare to extend the DAI driver
ASoC: sun8i-codec: Program format before clock inversion
ASoC: sun8i-codec: Enable all supported clock inversions
ASoC: sun8i-codec: Program the correct word size
ASoC: sun8i-codec: Round up the LRCK divisor
ASoC: sun8i-codec: Correct the BCLK divisor calculation
ASoC: sun8i-codec: Support the TDM slot binding
ASoC: sun8i-codec: Enforce symmetric DAI parameters
ASoC: sun8i-codec: Enable all supported sample rates
ASoC: sun8i-codec: Automatically set the system sample rate
ASoC: sun8i-codec: Constrain to compatible sample rates
ASoC: sun8i-codec: Protect the clock rate while streams are open
ASoC: sun8i-codec: Require an exact BCLK divisor match
ASoC: sun8i-codec: Enable all supported PCM formats
ASoC: sun8i-codec: Generalize AIF clock control
ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF2
ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF3
sound/soc/sunxi/sun8i-codec.c | 1135 ++++++++++++++++++++++++++-------
1 file changed, 894 insertions(+), 241 deletions(-)
--
2.26.2
RT715 and RT714 are essentially the same chip. In addition, there are
two versions, one supporting SoundWire 1.1 and one supporting
SoundWire 1.2 (SDCA).
The previous configurations assumed that RT714 was SDCA-only, which
isn't correct. Add support for the 4 possible combinations to avoid
confusions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Jack Yu <jack.yu@realtek.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201002211902.287692-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT715 and RT714 are essentially the same chips but with different
SoundWire Dev_ID registers, make sure we can probe the same driver if
RT714 is used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Jack Yu <jack.yu@realtek.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201002211902.287692-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Apply same test as for other amplifiers - in case we enable feedback
one day.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201002211902.287692-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove a level of indirection by getting the device directly from the
passed-in struct snd_soc_dai, instead of going through its component.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-9-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Each left/right pair of AIF input/output channels can be swapped or
combined. This is useful for sending a mono audio source to both sides
of a stereo sink, or for creating complex mixing scenarios.
Add the support to control this feature from userspace.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-8-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Both the left and right side widgets referenced channel 0. This would
unnecessarily power on the right side widget (and its associated path)
when a mono stream was active.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Whie the aif_in and aif_out widget types are handled exactly the same in
the core DAPM code, a future widget event hook will need the correct
widget type to derive the associated substream. Clean up the widget type
for that reason, and so these widgets will match newly-added widgets for
the other AIFs.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-6-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This cleans up the mixer widget names. The AIF1 AD0 Mixer names were
previously wrong -- they do not control the digital side of the ADC. The
DAC mixer widgets were not wrong, but they were verbose and did not
match the naming scheme of the other widgets.
The mixer controls are not renamed because they are exposed to
userspace.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Sort the remaining pieces of the DAPM driver so that they are all in the
same order among controls/widgets/routes, and so they roughly match the
register word and bit order of the hardware. This nicely separates the
AIF-related widgets from the ADC/DAC widgets, which allows the AIF
widgets to stay in a logical order as more AIFs are added to the driver.
No widgets are renamed, to ease verification that this commit makes no
functional change.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This matches the module power-up/down sequence from the vendor's driver.
While updating these widgets/routes, reorder them to match the register
and bit layout of the hardware. This puts them in the same place in the
widget and route arrays (previously they were at opposite ends), and it
makes it easier to track which parts of which registers are implemented.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sun8i codec is effectively an on-die variant of the X-Powers AC100
codec. The AC100 can derive its clocks from either of two I2S master
clocks or an internal PLL. For the on-die variant, Allwinner replaced
the codec's own PLL with a connection to SoC's existing PLL_AUDIO, and
they connected both I2S MCLK inputs to the same source -- which happens
to be an integer divider from the same PLL_AUDIO.
So there's actually no clocking flexibility. To run SYSCLK at the
required rate, it must be run straight from the PLL. The only choice is
whether it goes through AIF1CLK or AIF2CLK. Since both run at the same
rate, the only effect of that choice is which field in SYS_SR_CTRL
(AIF1_FS or AIF2_FS) controls the system sample rate.
Since AIFnCLK is required to bring up the corresponding DAI, and AIF1
(connected to the CPU) is used most often, let's use AIF1CLK as the
SYSCLK parent. That means we no longer need to set AIF2_FS.
Since this clock tree never changes, we can program it from the
component probe function, instead of using DAPM widgets. The DAPM
widgets unnecessarily change clock parents when the codec goes in/out
of idle and the supply widgets are powered up/down.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Sony/Philips Digital Interface Receiver (SPDIFRX) is a serial port
compliant with the IEC-60958 standard. Among its caracteristics, we
mention the following:
- SPDIF/AES-EBU Compatible Serial Port
- 32 Samples FIFO
- Data Width Configurable to 24 bits, 20 bits or 16 bits
- Packed and Unpacked Data Support for System Memory Optimization
- Line State Events Report and Source of Interrupt
- Line Error Rate Report
- Full Memory Map of 192 bits for Channel 1 and Channel 2 Status and
User Data
- First 32-bit Status A, Status B Change Report and Source of Interrupt
- Line Digital Filter
- Register Write Protection
- Abnormal Software Access and Internal Sequencer Integrity Check Reports
This interface is available in Microchip's SAMA7G5 SoC.
Codrin Ciubotariu (2):
dt-bindings: sound: add DT bindings for Microchip S/PDIF RX Controller
ASoC: mchp-spdifrx: add driver for SPDIF RX
.../bindings/sound/mchp,spdifrx.yaml | 73 ++
sound/soc/atmel/Kconfig | 13 +
sound/soc/atmel/Makefile | 2 +
sound/soc/atmel/mchp-spdifrx.c | 954 ++++++++++++++++++
4 files changed, 1042 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
create mode 100644 sound/soc/atmel/mchp-spdifrx.c
--
2.25.1
A deadlock is identified when there are three contexts running at the
same time:
- a HDMI jack work which is calling snd_soc_dapm_sync().
- user space is calling snd_pcm_release() to close pcm device.
- pm is calling runtime suspend function of HDMI codec driver.
By removing the clear_dapm_works() invocation in the
hdac_hdmi_runtime_suspend() function, the snd_pcm_release() could
always returns from dapm_power_widgets() function call without
blocking the hdac_hdmi_jack_dapm_work() work thread or being blocked
by the hdac_hdmi_runtime_suspend() function. The purpose of the jack
work is to enable/disable the dapm jack pin so it's not necessary to
cancel the work in runtime suspend function which is usually called
when pcm device is closed.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/1594818110-786-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new SPDIF RX controller is a serial port compliant with the IEC-60958
standard. It also supports programmable User Data and Channel Status
fields.
This IP is embedded in Microchip's sama7g5 SoC.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201002160305.815523-3-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement support for Lynxpoint and Wildcat Point AudioDSP. Catpt
solution deprecates existing sound/soc/intel/haswell which is removed in
the following series.
Due to high range of errors and desynchronization from recommendations
set by Windows solution, re-write came as a lower-cost solution compared
to refactoring /haswell/ with several series of patches.
Series is dependent on linux-spi change:
spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers
https://www.spinics.net/lists/linux-spi/msg23885.html
which has been already merged and is now part of linux-spi tree.
Bulk of series content is device driver core code - everything up to
patch 7/14 - with fs entries and trace macros introduced right after.
While each core patch is shaped in such a way that no unavailable
members are ever called, until patch 14/14 is applied, no code
compilation can occur as no Makefile is present. Once said patch is
added, Makefile and Kconfig are implemented and driver module compiles
as expected.
Special thanks go to Marcin Barlik and Piotr Papierkowski for sharing
their LPT/WPT AudioDSP architecture expertise as well as helping
backtrack its historical background.
My thanks go to Amadeusz Slawinski for reviews and improvements proposed
on and off the internal list. Most of internal diff below is his
contribution.
Krzysztof Hejmowski helped me setup my own Xtensa environment and
recompile LPT/WPT FW binary sources what sped up the development greatly.
This would not have been possible without help from these champions,
especially considering how quickly the catpt was written: 2 weeks
features, 3 weeks optimizations. Thank you.
Userspace-exposed members are compatible with what is exposed by
deprecated solution as well as FW binary being re-used thus no harm is
done. The only visible differences are: the newly added 'Loopback Mute'
kcontrol and volume support extending to quad from stereo.
On top of fixing erros and design flows, catpt also adds module reload,
dynamic SRAM memory allocation during PCM runtime and exposes missing
userspace API: 'Loopback Mute' kcontrol, quad volume controls and sysfs
fw-version entries. Event tracing is provided to ease solution
debugging.
Following are not included in this update and are scheduled as later
addition:
- fw logging
- module (library) support
Note: LPT power up/down sequences might get aligned with WPT once enough
testing is done as capabilities are shared for both DSPs.
Note #2: Both LPT and WPT power up/down sequences may get optimized in
future updates as thanks to help from the Windows team, most of nuances
behind why/what/when in regard to hw registers have been backtracked and
reviewed again.
Link to developer's deep dive message:
https://www.spinics.net/lists/alsa-devel/msg113563.html
Changes in v10:
- reverted DUAL_MONO case relocation from v9
- indented all constants of enum catpt_module_id to the same column
- new newline appended for return path of catpt_dsp_do_send_msg()
Changes in v9:
https://www.spinics.net/lists/alsa-devel/msg116305.html
- fixed newlines in sysfs as requested by Andy, left tags as no other
changes done
- removed volume_map and replaced by simple formulas for volume kcontrol
calculations
- removed redundant parentheses in catpt_get_channel_map() and
relocated DUAL_MONO case
- runtime suspend no longer called during module unload
- removed redundant size checks for catpt_dsp_send_tx() and
catpt_dsp_copy_rx()
Changes in v8:
https://www.spinics.net/lists/alsa-devel/msg116168.html
- updated catpt_arrange_page_table() with GENMASK and U32_MAX usage
- made use of PFN_DOWN() replacing explicit right shitfs by PAGE_SIZE
- made fw hash dumping in catpt_coredump() more readable and removed
hardcodes
- catpt_coredump() dumps fw hash now only if said segment has been found
within fw_info
- shortened _MSECS suffixes to _MS
- IPC structs no longer contain enum members
- simplified definition of catpt_set_dspvol()
Changes in v7:
https://www.spinics.net/lists/alsa-devel/msg116019.html
- fixed licence header for fs.c
- renamed fs.c to sysfs.c to better match its purpose
- added documentation within Documentation/ABI/testing for entries
exposed by catpt
- bin_attribute fw_build replaced by attribute fw_info:
fw_info contains full FW information and after successful handshake,
it's always available (stored in driver data) so no need to invoke
GET_FW_VERSION IPC again, just dump the stored information
- rather than manually creating and removing sysfs files, now makes use
of dev_groups member of struct device_driver
- patch: 10/14 'ASoC: Intel: Select catpt and deprecate haswell' has
been moved to the back of the list: enable catpt after machine boards
have been prepared for it first
- improved readability of several goto labels
Changes in v6:
https://www.spinics.net/lists/alsa-devel/msg115765.html
- reordered and reorganized code for patches 1/13 - 8/13 of v5, so each
patches makes use of no member or function which is unavailable to it.
Series size increased from 13 to 14 patches: addition of base members
e.g.: registers has been split from addition of device.c file which
describes acpi device behavior
Changes in v5:
https://www.spinics.net/lists/alsa-devel/msg115621.html
Basically everything below is result of Andy's review. Thank you Andy
for taking time into this detailed review
- catpt now makes use of common linux/pxa2xx_ssp.h header file, removing
redundant SSP register declarations in the process. As stated in the
opening, this is dependent upon linux-spi change:
spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers
- updated Kconfig by removing DMADEVICES and adding COMPILE_TEST
as optional depends-on
- updated all register macros definitions to be more safe against common
arithmetics when specifying macro's parameters
- removed CONFIG_PM and CONFIG_PM_SLEEP usage in favor of __maybe_unused
- all 'if (ret < 0)' converted to simple 'if (ret)' whenever possible
- fixed erroneous check for platform_device_register_data within
catpt_register_board()
- _SLAVE/_MASTER replaced with more inclusive _CONSUMER/_PROVIDER for
enum catpt_ssp_mode
- catpt_acpi_probe() is now making use of high-level wrappers for
ioremapping and resource assignment, reducing function's code size
- due to improved catpt_acpi_probe() behavior, catpt_acpi_remove() needs
not to cast dma_free_coherent() any longer
- DMA source and destrination maxburst now of value 16, see:
https://www.spinics.net/lists/alsa-devel/msg114394.html
- simplified catpt_dsp_update_lpclock() as list_for_each_entry() is
empty-safe by default
- dropped '_SSP_' from all names of all CATPT_SSP_SSXXX_DEFAULT macros
- catpt_updatel_pci now makes use of linux/pci.h and uapi/linux/pci.h
constants such as: PCI_PM_CTRL_STATE_MASK and PCI_D3hot
Changes in v4:
https://www.spinics.net/lists/alsa-devel/msg113762.html
- fixed compilation with i386 kconfig (conflicting names)
- streamlined naming for SHIM and PCI registers to match SSP ones
(SHIM_REG -> SHIM)
- catpt_component_probe removed and kcontrols again initializzed
statically via snd_kcontrol_new array: this is to remove
kctl->id.device shenanigans
- renamed catpt_set_ctlvol to catpt_set_dspvol - function name wasn't
matching its purpose
Changes in v3:
- fixed IRAM mask usage in lpt_dsp_power_up (dsp.c)
- updated dbg message formatting in catpt_restore_fwimage as suggested
by Andy
- fixed alignment for struct catpt_ssp_device_format
- catpt_set_ctlvol now verifies all-equal scenario based on all
channels rather than just first two as requested by Amadeo
- fixed SPDX for registers.h
Changes in v2:
https://www.spinics.net/lists/alsa-devel/msg113660.html
- fixed SPDX formatting for all header files as well as pcm.c
- fixed size provided to memcpy() in fw_build_read() as reported by Mark
- renamed struct catpt_pdata to struct catpt_spec (cosmetic)
- fixed erroneous path in catpt_load_block: region is properly released
- trace.h events for updating registers have been removed and usages
replaced by dev_dbg (SRAMPGE/ LPCS)
- as requested by Andy, struct resource has replaced struct catpt_mbank
and struct catpt_mregion. This change cascaded into:
- catpt_mbank_size and catpt_mregion_size replaced by resource_size
- catpt_mregion_intersects replaced by resource_overlaps
- all catpt_mbank_ and catpt_mregion_ handlers found in loader.c
(_request, _reserve, _release, _extract, _split, _join) have been
removed
- __request_region and __release_region have been enlisted in their
place
- catpt_mregion_intersecting renamed to catpt_resource_overlapping
- catpt_request_region helper has been provided to deal with -size
based requests
o haven't found direct replacements in resource.c/ ioport.h for
both functions
- catpt_mbank_create and catpt_mbank_remove renamed to catpt_sram_init
and catpt_sram_free respectively
- catpt_sram_init now returns void instead of int and has been
converted to simple initialized. This change ultimately cascaded
into:
o both SRAM banks initialization being moved to catpt_dev_init
from catpt_acpi_probe (device.c)
o catpt_dev::spec is now initialized first, with catpt_dev_init
following it soon after
o catpt_acpi_probe erroneous path has been simplified as SRAM
banks no longer need to be freed
- catpt_sram_free now frees all resources via child -> sibling
enumeration rather than region_list iteration
- catpt_dsp_update_srampge and catpt_dsp_set_srampge now accept new
argument: unsigned long mask. Caused by removal of catpt_mbank -
mask is taken directly from catpt_dev::spec::d/iram_mask
- trace.h events for catpt_mbank and catpt_mregion have been removed
Diff against last drop on internal list:
https://www.spinics.net/lists/alsa-devel/msg113549.html
- replaced spinlock with mutex for mregion allocation and release to
address sleeping in atomic context warnings
- fixed coredump fw_hash dumping
- kcontrol values are now always stored regardless of stream of interest
is running or not
- kcontrol values are now applied after stream is prepared instead of
ignoring what has been set by user initially
- catpt_pdata instances have been renamed from hsw_ and bdw_ to lpt_ and
wpt_ respectively
- reordered Makefile .o(s) (cosmetic)
Cezary Rojewski (14):
ASoC: Intel: Add catpt base members
ASoC: Intel: catpt: Implement IPC protocol
ASoC: Intel: catpt: Add IPC message handlers
ASoC: Intel: catpt: Define DSP operations
ASoC: Intel: catpt: Firmware loading and context restore
ASoC: Intel: catpt: PCM operations
ASoC: Intel: catpt: Device driver lifecycle
ASoC: Intel: catpt: Event tracing
ASoC: Intel: catpt: Simple sysfs attributes
ASoC: Intel: haswell: Remove haswell-solution specific code
ASoC: Intel: broadwell: Remove haswell-solution specific code
ASoC: Intel: bdw-5650: Remove haswell-solution specific code
ASoC: Intel: bdw-5677: Remove haswell-solution specific code
ASoC: Intel: Select catpt and deprecate haswell
.../ABI/testing/sysfs-bus-pci-devices-catpt | 16 +
sound/soc/intel/Kconfig | 24 +-
sound/soc/intel/Makefile | 2 +-
sound/soc/intel/boards/Kconfig | 8 +-
sound/soc/intel/boards/bdw-rt5650.c | 36 -
sound/soc/intel/boards/bdw-rt5677.c | 33 -
sound/soc/intel/boards/broadwell.c | 33 -
sound/soc/intel/boards/haswell.c | 28 +-
sound/soc/intel/catpt/Makefile | 6 +
sound/soc/intel/catpt/core.h | 188 +++
sound/soc/intel/catpt/device.c | 352 +++++
sound/soc/intel/catpt/dsp.c | 578 ++++++++
sound/soc/intel/catpt/ipc.c | 298 +++++
sound/soc/intel/catpt/loader.c | 671 ++++++++++
sound/soc/intel/catpt/messages.c | 313 +++++
sound/soc/intel/catpt/messages.h | 401 ++++++
sound/soc/intel/catpt/pcm.c | 1175 +++++++++++++++++
sound/soc/intel/catpt/registers.h | 178 +++
sound/soc/intel/catpt/sysfs.c | 55 +
sound/soc/intel/catpt/trace.h | 83 ++
20 files changed, 4335 insertions(+), 143 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-pci-devices-catpt
create mode 100644 sound/soc/intel/catpt/Makefile
create mode 100644 sound/soc/intel/catpt/core.h
create mode 100644 sound/soc/intel/catpt/device.c
create mode 100644 sound/soc/intel/catpt/dsp.c
create mode 100644 sound/soc/intel/catpt/ipc.c
create mode 100644 sound/soc/intel/catpt/loader.c
create mode 100644 sound/soc/intel/catpt/messages.c
create mode 100644 sound/soc/intel/catpt/messages.h
create mode 100644 sound/soc/intel/catpt/pcm.c
create mode 100644 sound/soc/intel/catpt/registers.h
create mode 100644 sound/soc/intel/catpt/sysfs.c
create mode 100644 sound/soc/intel/catpt/trace.h
--
2.17.1
Prevent sound/soc/intel/haswell code compile and select catpt instead as
a recommended solution. Userspace-exposed members are compatible with
what is exposed by deprecated solution thus no harm is done. The only
visible difference is the newly added 'Loopback Mute' kcontrol.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove code specific to sound/soc/intel/haswell. Update BE dai_link
definition to provide seamless transition to catpt solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove code specific to sound/soc/intel/haswell. Update BE dai_link
definition to provide seamless transition to catpt solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove code specific to sound/soc/intel/haswell. Update BE dai_link
definition to provide seamless transition to catpt solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove code specific to sound/soc/intel/haswell. Update BE dai_link
definition to provide seamless transition to catpt solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sysfs entries for displaying version of FW currently in use as well
as dumping full FW information including build and log-providers hashes.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define tracing macros for easy catpt debug. These cover all IPC message
types: requests, replies and notifications.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement ACPI device probing and removal functions as well as handlers
for its PM capabilities. Device probing also takes care of enumerating
ADSP subsystem components.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP designed for Lynxpoint and Wildcat Point offers no dynamic topology
i.e. all pipelines are already defined within firmware and host is
relegated to allocing stream for predefined pins. This is represented by
'catpt_topology' member.
Implementation covers all available pin types:
- system playback and capture
- two offload streams
- loopback (reference)
- bluetooth playback and capture
PCM DAI operations differentiate between those pins as some (mainly
offload) are to be handled differently - DSP expects wp updates on each
notify_position notification.
System playback has no volume control capability as it is routed to
mixer stream directly. Other primary streams - capture and two offloads
- offer individual volume controls.
Compared to sound/soc/intel/haswell this configures SSP device format
automatically on pcm creation.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For Lynxpoint and Wildcat Point solution, is it host's responsibility to
allocate SRAM regions and ensure those already taken are not overwritten
with other data until released. Blocks are transferred to SRAM - either
IRAM or DRAM - via DW DMA controller. Once basefw is booted, ownership
of DMA transfer is lost in favour of DSP.
Hosts reponsibilities don't end on initial block allocation and binary
transfer. During Dx transitions host must store FW runtime context from
DRAM before putting AudioDSP subsystem into lower power state. Said
context gets flashed after D0 entry to bring DSP right where it was just
before suspending.
Load and restore procedures are finalized with SRAM power gating and
adequate clock level selection. This power gates unused EBBs and clock
speed effectively reducing power consumption.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement dsp lifecycle functions such as core RESET and STALL,
SRAM power control and LP clock selection. This also adds functions for
handling transport over DW DMA controller.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare global and stream IPC message handlers for all known message
types.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement IRQ handlers for immediate and delayed replies and
notifications. Communication is synchronous and allows for serialization
of maximum one message at a time.
DSP may respond with ADSP_PENDING status for a request - known as
delayed reply - and when situation occurs, framework keeps the lock and
awaits upcoming response through IPCD channel which is handled in
bottom-half. Immediate replies spawn no BH at all as their processing is
very short.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare base structures, registers and extension routines for the catpt
solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After installing archlinux, the mute led and micmute led are not working
at all. This patch fix this issue by applying a fixup from similar
model. These mute leds are confirmed working on HP Elitebook 845 G7.
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinos.com.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201002124454.7240-1-qiuwenbo@kylinos.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function fsl_spdif_probe() is only called with an openfirmware
platform device. Therefore there is no need to check that the passed
in device is NULL.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200826150918.16116-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
-----BEGIN PGP SIGNATURE-----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=ALTw
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.10-rc1
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
* tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits)
soundwire: sysfs: add slave status and device number before probe
soundwire: bus: add enumerated Slave device to device list
soundwire: remove an unnecessary NULL check
soundwire: cadence: add data port test fail interrupt
soundwire: intel: enable test modes
soundwire: enable Data Port test modes
soundwire: intel: use {u32|u16}p_replace_bits
soundwire: cadence: use u32p_replace_bits
soundwire: qcom: get max rows and cols info from compatible
soundwire: qcom: add support to block packing mode
soundwire: qcom: clear BIT FIELDs before value set.
soundwire: Add generic bandwidth allocation algorithm
soundwire: cadence: add parity error injection through debugfs
soundwire: bus: export broadcast read/write capability for tests
ASoC: codecs: realtek-soundwire: ignore initial PARITY errors
soundwire: bus: use quirk to filter out invalid parity errors
soundwire: slave: add first_interrupt_done status
soundwire: bus: filter-out unwanted interrupt reports
ASoC/soundwire: bus: use property to set interrupt masks
soundwire: qcom: fix SLIBMUS/SLIMBUS typo
...
commit 140a4532cd ("ASoC: soc-pcm: add soc_pcm_clean() and call it
from soc_pcm_open/close()") switched to use soc_pcm_clean() at
soc_pcm_open().
But it removed "return 0", and missing "ret = 0",
because of it, it always return -EINVAL eventhough no error.
This patch adds missing "ret = 0" for success case.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/87ft6ya65z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Linus Torvalds
Cezary Rojewski
Tomasz Figa
Kai Vehmanen
Takashi Iwai
Julia Lawall
Mark Brown
Codrin Ciubotariu
Peter Ujfalusi
Dan Murphy
Olivier Moysan
V Sujith Kumar Reddy
Jeremy Szu
Naoki Hayama
Dan Carpenter
Jian-Hong Pan
Colin Ian King
Randy Dunlap
Alex Dewar
Tzung-Bi Shih
Pierre-Louis Bossart
Samuel Holland
Greg Kroah-Hartman
Christophe JAILLET
Brent Lu
Qiu Wenbo
Tang Bin
Kuninori Morimoto