Simplify irq_remapping code by killing irq_remapping_supported() and
related interfaces.
Joerg posted a similar patch at https://lkml.org/lkml/2014/12/15/490,
so assume an signed-off from Joerg.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-14-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This allows to get rid of the irq_remapping_supported() function and
all its call-backs into the Intel and AMD IOMMU drivers.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-13-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently if CPU supports X2APIC, IR hardware must work in X2APIC mode
or disabled. Change the code to support IR working in XAPIC mode when
CPU supports X2APIC. Then the CPU APIC driver will decide how to handle
such as configuration by:
1) Disabling X2APIC mode
2) Forcing X2APIC physical mode
This change also fixes a live locking when
1) BIOS enables CPU X2APIC
2) DMAR table disables X2APIC mode or IR hardware doesn't support X2APIC
with following messages:
[ 37.863463] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
[ 37.863463] INTR-REMAP:[fault reason 36] Detected reserved fields in the IRTE entry
[ 37.879372] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
[ 37.879372] INTR-REMAP:[fault reason 36] Detected reserved fields in the IRTE entry
[ 37.895282] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
[ 37.895282] INTR-REMAP:[fault reason 36] Detected reserved fields in the IRTE entry
[ 37.911192] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-11-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
IRQ remapping is only supported when all IOMMUs in the
system support it. So check if all IOMMUs in the system
support IRQ remapping before doing the allocations.
[Jiang]
1) Rebased to v3.19.
2) Remove redundant check of ecap_ir_support(iommu->ecap) in function
intel_enable_irq_remapping().
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-10-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Prepare for killing function irq_remapping_supported() by moving code
from intel_irq_remapping_supported() into intel_prepare_irq_remapping().
Combined with patch from Joerg at https://lkml.org/lkml/2014/12/15/487,
so assume an signed-off from Joerg.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-9-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The whole iommu setup for irq remapping is a convoluted mess. The
iommu detect function gets called from mem_init() and the prepare
callback gets called from enable_IR_x2apic() for unknown reasons.
Of course AMD and Intel setup differs in nonsensical ways. Intels
prepare callback is explicit while AMDs prepare callback is implicit
in setup_irq_remapping_ops() just to be called in the prepare call
again.
Because all of this gets called from enable_IR_x2apic() and the dmar
prepare function merily parses the ACPI tables, but does not allocate
memory we end up with memory allocation from irq disabled context
later on.
AMDs iommu code at least allocates the required memory from the
prepare function. That has issues as well, but thats not scope of this
patch.
The goal of this change is to distangle the allocation from the actual
enablement. There is no point to allocate memory from irq disabled
regions with GFP_ATOMIC just because it does not matter at that point
in the boot stage. It matters with physical hotplug later on.
There is another issue with the current setup. Due to the conversion
to stacked irqdomains we end up with a call into the irqdomain
allocation code from irq disabled context, but that code does
GFP_KERNEL allocations rightfully as there is no reason to do
preperatory allocations with GFP_ATOMIC.
That change caused the allocator code to complain about GFP_KERNEL
allocations invoked in atomic context. Boris provided a temporary
hackaround which changed the GFP flags if irq_domain_add() got called
from atomic context. Not pretty and we really dont want to get this
into a mainline release for obvious reasons.
Move the ACPI table parsing and the resulting memory allocations from
the enable to the prepare function. That allows to get rid of the
horrible hackaround in irq_domain_add() later.
[Jiang] Rebased onto v3.19
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Acked-and-tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20141205084147.313026156@linutronix.de
Link: http://lkml.kernel.org/r/1420615903-28253-3-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
enable_IR_x2apic() calls setup_irq_remapping_ops() which by default
installs the intel dmar remapping ops and then calls the amd iommu irq
remapping prepare callback to figure out whether we are running on an
AMD machine with irq remapping hardware.
Right after that it calls irq_remapping_prepare() which pointlessly
checks:
if (!remap_ops || !remap_ops->prepare)
return -ENODEV;
and then calls
remap_ops->prepare()
which is silly in the AMD case as it got called from
setup_irq_remapping_ops() already a few microseconds ago.
Simplify this and just collapse everything into
irq_remapping_prepare().
The irq_remapping_prepare() remains still silly as it assigns blindly
the intel ops, but that's not scope of this patch.
The scope here is to move the preperatory work, i.e. memory
allocations out of the atomic section which is required to enable irq
remapping.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Acked-and-tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <jroedel@suse.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20141205084147.232633738@linutronix.de
Link: http://lkml.kernel.org/r/1420615903-28253-2-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 1196c2f a domain is only destroyed in the
notifier path if it is hot-unplugged. This caused a
domain leakage in iommu_attach_device when a driver was
unbound from the device and bound to VFIO. In this case the
device is attached to a new domain and unlinked from the old
domain. At this point nothing points to the old domain
anymore and its memory is leaked.
Fix this by explicitly freeing the old domain in
iommu_attach_domain.
Fixes: 1196c2f (iommu/vt-d: Fix dmar_domain leak in iommu_attach_device)
Cc: stable@vger.kernel.org # v3.18
Tested-by: Jerry Hoemann <jerry.hoemann@hp.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit a720b41c41 ("iommu/arm-smmu: change IOMMU_EXEC to
IOMMU_NOEXEC") has inverted and replaced the IOMMU_EXEC flag with
IOMMU_NOEXEC. Update the driver accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull x86 apic updates from Thomas Gleixner:
"After stopping the full x86/apic branch, I took some time to go
through the first block of patches again, which are mostly cleanups
and preparatory work for the irqdomain conversion and ioapic hotplug
support.
Unfortunaly one of the real problematic commits was right at the
beginning, so I rebased this portion of the pending patches without
the offenders.
It would be great to get this into 3.19. That makes reworking the
problematic parts simpler. The usual tip testing did not unearth any
issues and it is fully bisectible now.
I'm pretty confident that this wont affect the calmness of the xmas
season.
Changes:
- Split the convoluted io_apic.c code into domain specific parts
(vector, ioapic, msi, htirq)
- Introduce proper helper functions to retrieve irq specific data
instead of open coded dereferencing of pointers
- Preparatory work for ioapic hotplug and irqdomain conversion
- Removal of the non functional pci-ioapic driver
- Removal of unused irq entry stubs
- Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC
allocations for everything which is called from there.
- Small cleanups and fixes"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ
iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ
x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ
x86, irq: Use helpers to access irq_cfg data structure associated with IRQ
x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC
x86, irq: Move IRQ initialization routines from io_apic.c into vector.c
x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h
x86, irq: Move HT IRQ related code from io_apic.c into htirq.c
x86, irq: Move PCI MSI related code from io_apic.c into msi.c
x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities
x86, irq: Make UP version of irq_complete_move() an inline stub
x86, irq: Move local APIC related code from io_apic.c into vector.c
x86, irq: Introduce helpers to access struct irq_cfg
x86, irq: Protect __clear_irq_vector() with vector_lock
x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx()
x86, irq: Refine hw_irq.h to prepare for irqdomain support
x86, irq: Convert irq_2_pin list to generic list
x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector()
x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI
x86, irq: Introduce helper to check whether an IOAPIC has been registered
...
The iomm-config branch contains work from Will Deacon, quoting his description:
This series adds automatic IOMMU and DMA-mapping configuration for
OF-based DMA masters described using the generic IOMMU devicetree
bindings. Although there is plenty of future work around splitting up
iommu_ops, adding default IOMMU domains and sorting out automatic IOMMU
group creation for the platform_bus, this is already useful enough for
people to port over their IOMMU drivers and start using the new probing
infrastructure (indeed, Marek has patches queued for the Exynos IOMMU).
The branch touches core ARM and IOMMU driver files, and the respective
maintainers (Russell King and Joerg Roedel) agreed to have the contents
merged through the arm-soc tree. The final version was ready just before
the merge window, so we ended up delaying it a bit longer than the rest,
but we don't expect to see regressions because this is just additional
infrastructure that will get used in drivers starting in 3.20 but is
unused so far.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=ELLq
-----END PGP SIGNATURE-----
Merge tag 'iommu-config-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC/iommu configuration update from Arnd Bergmann:
"The iomm-config branch contains work from Will Deacon, quoting his
description:
This series adds automatic IOMMU and DMA-mapping configuration for
OF-based DMA masters described using the generic IOMMU devicetree
bindings. Although there is plenty of future work around splitting up
iommu_ops, adding default IOMMU domains and sorting out automatic IOMMU
group creation for the platform_bus, this is already useful enough for
people to port over their IOMMU drivers and start using the new probing
infrastructure (indeed, Marek has patches queued for the Exynos IOMMU).
The branch touches core ARM and IOMMU driver files, and the respective
maintainers (Russell King and Joerg Roedel) agreed to have the
contents merged through the arm-soc tree.
The final version was ready just before the merge window, so we ended
up delaying it a bit longer than the rest, but we don't expect to see
regressions because this is just additional infrastructure that will
get used in drivers starting in 3.20 but is unused so far"
* tag 'iommu-config-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
iommu: store DT-probed IOMMU data privately
arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops
arm: call iommu_init before of_platform_populate
dma-mapping: detect and configure IOMMU in of_dma_configure
iommu: fix initialization without 'add_device' callback
iommu: provide helper function to configure an IOMMU for an of master
iommu: add new iommu_ops callback for adding an OF device
dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_ops
iommu: provide early initialisation hook for IOMMU drivers
Here are the first arm-soc bug fixes. Most of these are OMAP related
fixes for regressions or minor bugs. Aside from that, there are a
few defconfig changes for various platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=mTqr
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are the first arm-soc bug fixes. Most of these are OMAP related
fixes for regressions or minor bugs. Aside from that, there are a few
defconfig changes for various platforms"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
iommu/exynos: Fix arm64 allmodconfig build
ARM: defconfigs: use CONFIG_CPUFREQ_DT
ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver
ARM: dts: am437x-sk-evm.dts: fix LCD timings
ARM: dts: dra7-evm: Update SMPS7 (VDD_CORE) max voltage to match DM
ARM: dts: dra7-evm: Fix typo in SMPS6 (VDD_GPU) max voltage
ARM: OMAP2+: AM43x: Add ID for ES1.2
ARM: dts: am437x-sk: fix lcd enable pin mux data
ARM: dts: Fix gpmc regression for omap 2430sdp smc91x
Revert "ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig"
ARM: dts: dra7: fix DSS PLL clock mux registers
ARM: dts: DRA7: wdt: Fix compatible property for watchdog node
ARM: OMAP2+: clock: remove unused function prototype
The Exynos IOMMU driver uses the ARM specific dmac_flush_range() and
outer_flush_range() functions. This breaks the build on arm64 allmodconfig
in -next since support has been merged for some Exynos ARMv8 SoCs. Add a
dependency on ARM to keep things building until either the driver has the
ARM dependencies removed or the ARMv8 architecture code implements these
ARM specific APIs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use helpers to access irq_cfg data structure associated with IRQ,
instead of accessing irq_data->chip_data directly. Later we can
rewrite those helpers to support hierarchy irqdomain.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1414397531-28254-20-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use helpers to access irq_cfg data structure associated with IRQ,
instead of accessing irq_data->chip_data directly. Later we can
rewrite those helpers to support hierarchy irqdomain.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1414397531-28254-19-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use helpers to access irq_cfg data structure associated with IRQ,
instead of accessing irq_data->chip_data directly. Later we can
rewrite those helpers to support hierarchy irqdomain.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1414397531-28254-18-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull drm updates from Dave Airlie:
"Highlights:
- AMD KFD driver merge
This is the AMD HSA interface for exposing a lowlevel interface for
GPGPU use. They have an open source userspace built on top of this
interface, and the code looks as good as it was going to get out of
tree.
- Initial atomic modesetting work
The need for an atomic modesetting interface to allow userspace to
try and send a complete set of modesetting state to the driver has
arisen, and been suffering from neglect this past year. No more,
the start of the common code and changes for msm driver to use it
are in this tree. Ongoing work to get the userspace ioctl finished
and the code clean will probably wait until next kernel.
- DisplayID 1.3 and tiled monitor exposed to userspace.
Tiled monitor property is now exposed for userspace to make use of.
- Rockchip drm driver merged.
- imx gpu driver moved out of staging
Other stuff:
- core:
panel - MIPI DSI + new panels.
expose suggested x/y properties for virtual GPUs
- i915:
Initial Skylake (SKL) support
gen3/4 reset work
start of dri1/ums removal
infoframe tracking
fixes for lots of things.
- nouveau:
tegra k1 voltage support
GM204 modesetting support
GT21x memory reclocking work
- radeon:
CI dpm fixes
GPUVM improvements
Initial DPM fan control
- rcar-du:
HDMI support added
removed some support for old boards
slave encoder driver for Analog Devices adv7511
- exynos:
Exynos4415 SoC support
- msm:
a4xx gpu support
atomic helper conversion
- tegra:
iommu support
universal plane support
ganged-mode DSI support
- sti:
HDMI i2c improvements
- vmwgfx:
some late fixes.
- qxl:
use suggested x/y properties"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
drm: sti: fix module compilation issue
drm/i915: save/restore GMBUS freq across suspend/resume on gen4
drm: sti: correctly cleanup CRTC and planes
drm: sti: add HQVDP plane
drm: sti: add cursor plane
drm: sti: enable auxiliary CRTC
drm: sti: fix delay in VTG programming
drm: sti: prepare sti_tvout to support auxiliary crtc
drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
drm: sti: fix hdmi avi infoframe
drm: sti: remove event lock while disabling vblank
drm: sti: simplify gdp code
drm: sti: clear all mixer control
drm: sti: remove gpio for HDMI hot plug detection
drm: sti: allow to change hdmi ddc i2c adapter
drm/doc: Document drm_add_modes_noedid() usage
drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
drm: Zero out DRM object memory upon cleanup
drm/i915/bdw: Fix the write setting up the WIZ hashing mode
...
Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes, just
removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There are
some ath9k patches coming in through this tree that have been acked by
the wireless maintainers as they relied on the debugfs changes.
Everything has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
53kAoLeteByQ3iVwWurwwseRPiWa8+MI
=OVRS
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
Merge second patchbomb from Andrew Morton:
- the rest of MM
- misc fs fixes
- add execveat() syscall
- new ratelimit feature for fault-injection
- decompressor updates
- ipc/ updates
- fallocate feature creep
- fsnotify cleanups
- a few other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (99 commits)
cgroups: Documentation: fix trivial typos and wrong paragraph numberings
parisc: percpu: update comments referring to __get_cpu_var
percpu: update local_ops.txt to reflect this_cpu operations
percpu: remove __get_cpu_var and __raw_get_cpu_var macros
fsnotify: remove destroy_list from fsnotify_mark
fsnotify: unify inode and mount marks handling
fallocate: create FAN_MODIFY and IN_MODIFY events
mm/cma: make kmemleak ignore CMA regions
slub: fix cpuset check in get_any_partial
slab: fix cpuset check in fallback_alloc
shmdt: use i_size_read() instead of ->i_size
ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments
ipc/msg: increase MSGMNI, remove scaling
ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM
ipc/sem.c: change memory barrier in sem_lock() to smp_rmb()
lib/decompress.c: consistency of compress formats for kernel image
decompress_bunzip2: off by one in get_next_block()
usr/Kconfig: make initrd compression algorithm selection not expert
fault-inject: add ratelimit option
ratelimit: add initialization macro
...
This could be useful for debug in the future if we want to track
major/minor faults more closely, and also avoids the put_page trick we
used with gup.
In order to do this, we also track the task struct in the PASID state
structure. This lets us update the appropriate task stats after the fault
has been handled, and may aid with debug in the future as well.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Oded Gabbay <oded.gabbay@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This time with:
* A new IOMMU-API call: iommu_map_sg() to map multiple
non-contiguous pages into an IO address space with only one
API call. This allows certain optimizations in the IOMMU
driver.
* DMAR device hotplug in the Intel VT-d driver. It is now
possible to hotplug the IOMMU itself.
* A new IOMMU driver for the Rockchip ARM platform.
* Couple of cleanups and improvements in the OMAP IOMMU driver.
* Nesting support for the ARM-SMMU driver.
* Various other small cleanups and improvements.
Please note that this time some branches were also pulled into other
trees, like the DRI and the Tegra tree. The VT-d branch was also pulled
into tip/x86/apic.
Some patches for the AMD IOMMUv2 driver are not in the IOMMU tree but
were merged by Andrew (or finally ended up in the DRI tree).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=x7Ei
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"This time with:
- A new IOMMU-API call: iommu_map_sg() to map multiple non-contiguous
pages into an IO address space with only one API call. This allows
certain optimizations in the IOMMU driver.
- DMAR device hotplug in the Intel VT-d driver. It is now possible
to hotplug the IOMMU itself.
- A new IOMMU driver for the Rockchip ARM platform.
- Couple of cleanups and improvements in the OMAP IOMMU driver.
- Nesting support for the ARM-SMMU driver.
- Various other small cleanups and improvements.
Please note that this time some branches were also pulled into other
trees, like the DRI and the Tegra tree. The VT-d branch was also
pulled into tip/x86/apic.
Some patches for the AMD IOMMUv2 driver are not in the IOMMU tree but
were merged by Andrew (or finally ended up in the DRI tree)"
* tag 'iommu-updates-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits)
iommu: Decouple iommu_map_sg from CPU page size
iommu/vt-d: Fix an off-by-one bug in __domain_mapping()
pci, ACPI, iommu: Enhance pci_root to support DMAR device hotplug
iommu/vt-d: Enhance intel-iommu driver to support DMAR unit hotplug
iommu/vt-d: Enhance error recovery in function intel_enable_irq_remapping()
iommu/vt-d: Enhance intel_irq_remapping driver to support DMAR unit hotplug
iommu/vt-d: Search for ACPI _DSM method for DMAR hotplug
iommu/vt-d: Implement DMAR unit hotplug framework
iommu/vt-d: Dynamically allocate and free seq_id for DMAR units
iommu/vt-d: Introduce helper function dmar_walk_resources()
iommu/arm-smmu: add support for DOMAIN_ATTR_NESTING attribute
iommu/arm-smmu: Play nice on non-ARM/SMMU systems
iommu/amd: remove compiler warning due to IOMMU_CAP_NOEXEC
iommu/arm-smmu: add IOMMU_CAP_NOEXEC to the ARM SMMU driver
iommu: add capability IOMMU_CAP_NOEXEC
iommu/arm-smmu: change IOMMU_EXEC to IOMMU_NOEXEC
iommu/amd: Fix accounting of device_state
x86/vt-d: Fix incorrect bit operations in setting values
iommu/rockchip: Allow to compile with COMPILE_TEST
iommu/ipmmu-vmsa: Return proper error if devm_request_irq fails
...
Pull irq domain updates from Thomas Gleixner:
"The real interesting irq updates:
- Support for hierarchical irq domains:
For complex interrupt routing scenarios where more than one
interrupt related chip is involved we had no proper representation
in the generic interrupt infrastructure so far. That made people
implement rather ugly constructs in their nested irq chip
implementations. The main offenders are x86 and arm/gic.
To distangle that mess we have now hierarchical irqdomains which
seperate the various interrupt chips and connect them via the
hierarchical domains. That keeps the domain specific details
internal to the particular hierarchy level and removes the
criss/cross referencing of chip internals. The resulting hierarchy
for a complex x86 system will look like this:
vector mapped: 74
msi-0 mapped: 2
dmar-ir-1 mapped: 69
ioapic-1 mapped: 4
ioapic-0 mapped: 20
pci-msi-2 mapped: 45
dmar-ir-0 mapped: 3
ioapic-2 mapped: 1
pci-msi-1 mapped: 2
htirq mapped: 0
Neither ioapic nor pci-msi know about the dmar interrupt remapping
between themself and the vector domain. If interrupt remapping is
disabled ioapic and pci-msi become direct childs of the vector
domain.
In hindsight we should have done that years ago, but in hindsight
we always know better :)
- Support for generic MSI interrupt domain handling
We have more and more non PCI related MSI interrupts, so providing
a generic infrastructure for this is better than having all
affected architectures implementing their own private hacks.
- Support for PCI-MSI interrupt domain handling, based on the generic
MSI support.
This part carries the pci/msi branch from Bjorn Helgaas pci tree to
avoid a massive conflict. The PCI/MSI parts are acked by Bjorn.
I have two more branches on top of this. The full conversion of x86
to hierarchical domains and a partial conversion of arm/gic"
* 'irq-irqdomain-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
genirq: Move irq_chip_write_msi_msg() helper to core
PCI/MSI: Allow an msi_controller to be associated to an irq domain
PCI/MSI: Provide mechanism to alloc/free MSI/MSIX interrupt from irqdomain
PCI/MSI: Enhance core to support hierarchy irqdomain
PCI/MSI: Move cached entry functions to irq core
genirq: Provide default callbacks for msi_domain_ops
genirq: Introduce msi_domain_alloc/free_irqs()
asm-generic: Add msi.h
genirq: Add generic msi irq domain support
genirq: Introduce callback irq_chip.irq_write_msi_msg
genirq: Work around __irq_set_handler vs stacked domains ordering issues
irqdomain: Introduce helper function irq_domain_add_hierarchy()
irqdomain: Implement a method to automatically call parent domains alloc/free
genirq: Introduce helper irq_domain_set_info() to reduce duplicated code
genirq: Split out flow handler typedefs into seperate header file
genirq: Add IRQ_SET_MASK_OK_DONE to support stacked irqchip
genirq: Introduce irq_chip.irq_compose_msi_msg() to support stacked irqchip
genirq: Add more helper functions to support stacked irq_chip
genirq: Introduce helper functions to support stacked irq_chip
irqdomain: Do irq_find_mapping and set_type for hierarchy irqdomain in case OF
...
Merge rockchip GPU support.
This has a branch in common with the iommu tree, hopefully the
process works.
* 'drm_iommu_v15' of https://github.com/markyzq/kernel-drm-rockchip:
dt-bindings: video: Add documentation for rockchip vop
dt-bindings: video: Add for rockchip display subsytem
drm: rockchip: Add basic drm driver
dt-bindings: iommu: Add documentation for rockchip iommu
iommu/rockchip: rk3288 iommu driver
Since the data pointer in the DT node is public and may be overwritten
by conflicting code, move the DT-probed IOMMU ops to a private list
where they will be safe.
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: added missing #include and missing ')']
Signed-off-by: Will Deacon <will.deacon@arm.com>
The memory controller on NVIDIA Tegra exposes various knobs that can be
used to tune the behaviour of the clients attached to it.
Currently this driver sets up the latency allowance registers to the HW
defaults. Eventually an API should be exported by this driver (via a
custom API or a generic subsystem) to allow clients to register latency
requirements.
This driver also registers an IOMMU (SMMU) that's implemented by the
memory controller. It is supported on Tegra30, Tegra114 and Tegra124
currently. Tegra20 has a GART instead.
The Tegra SMMU operates on memory clients and SWGROUPs. A memory client
is a unidirectional, special-purpose DMA master. A SWGROUP represents a
set of memory clients that form a logical functional unit corresponding
to a single device. Typically a device has two clients: one client for
read transactions and one client for write transactions, but there are
also devices that have only read clients, but many of them (such as the
display controllers).
Because there is no 1:1 relationship between memory clients and devices
the driver keeps a table of memory clients and the SWGROUPs that they
belong to per SoC. Note that this is an exception and due to the fact
that the SMMU is tightly integrated with the rest of the Tegra SoC. The
use of these tables is discouraged in drivers for generic IOMMU devices
such as the ARM SMMU because the same IOMMU could be used in any number
of SoCs and keeping such tables for each SoC would not scale.
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If the IOMMU supports pages smaller than the CPU page size, segments
which lie at offsets within the CPU page may be mapped based on the
finer-grained IOMMU page boundaries. This minimises the amount of
non-buffer memory between the CPU page boundary and the start of the
segment which must be mapped and therefore exposed to the device, and
brings the default iommu_map_sg implementation in line with
iommu_map/unmap with respect to alignment.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There's an off-by-one bug in function __domain_mapping(), which may
trigger the BUG_ON(nr_pages < lvl_pages) when
(nr_pages + 1) & superpage_mask == 0
The issue was introduced by commit 9051aa0268 "intel-iommu: Combine
domain_pfn_mapping() and domain_sg_mapping()", which sets sg_res to
"nr_pages + 1" to avoid some of the 'sg_res==0' code paths.
It's safe to remove extra "+1" because sg_res is only used to calculate
page size now.
Reported-And-Tested-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: <stable@vger.kernel.org> # >= 3.0
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU drivers can be initialized from of_iommu helpers. Such drivers don't
need to provide device_add callbacks to operate properly, so there is no
need to fail initialization if the callback is missing.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The generic IOMMU device-tree bindings can be used to add arbitrary OF
masters to an IOMMU with a compliant binding.
This patch introduces of_iommu_configure, which does exactly that.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
IOMMU drivers must be initialised before any of their upstream devices,
otherwise the relevant iommu_ops won't be configured for the bus in
question. To solve this, a number of IOMMU drivers use initcalls to
initialise the driver before anything has a chance to be probed.
Whilst this solves the immediate problem, it leaves the job of probing
the IOMMU completely separate from the iommu_ops to configure the IOMMU,
which are called on a per-bus basis and require the driver to figure out
exactly which instance of the IOMMU is being requested. In particular,
the add_device callback simply passes a struct device to the driver,
which then has to parse firmware tables or probe buses to identify the
relevant IOMMU instance.
This patch takes the first step in addressing this problem by adding an
early initialisation pass for IOMMU drivers, giving them the ability to
store some per-instance data in their iommu_ops structure and store that
in their of_node. This can later be used when parsing OF masters to
identify the IOMMU instance in question.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Implement required callback functions for intel-iommu driver
to support DMAR unit hotplug.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Enhance error recovery in function intel_enable_irq_remapping()
by tearing down all created data structures.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement required callback functions for intel_irq_remapping driver
to support DMAR unit hotplug.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
According to Intel VT-d specification, _DSM method to support DMAR
hotplug should exist directly under corresponding ACPI object
representing PCI host bridge. But some BIOSes doesn't conform to
this, so search for _DSM method in the subtree starting from the
ACPI object representing the PCI host bridge.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On Intel platforms, an IO Hub (PCI/PCIe host bridge) may contain DMAR
units, so we need to support DMAR hotplug when supporting PCI host
bridge hotplug on Intel platforms.
According to Section 8.8 "Remapping Hardware Unit Hot Plug" in "Intel
Virtualization Technology for Directed IO Architecture Specification
Rev 2.2", ACPI BIOS should implement ACPI _DSM method under the ACPI
object for the PCI host bridge to support DMAR hotplug.
This patch introduces interfaces to parse ACPI _DSM method for
DMAR unit hotplug. It also implements state machines for DMAR unit
hot-addition and hot-removal.
The PCI host bridge hotplug driver should call dmar_hotplug_hotplug()
before scanning PCI devices connected for hot-addition and after
destroying all PCI devices for hot-removal.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce functions to support dynamic IOMMU seq_id allocating and
releasing, which will be used to support DMAR hotplug.
Also rename IOMMU_UNITS_SUPPORTED as DMAR_UNITS_SUPPORTED.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce helper function dmar_walk_resources to walk resource entries
in DMAR table and ACPI buffer object returned by ACPI _DSM method
for IOMMU hot-plug.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When domains are set with the DOMAIN_ATTR_NESTING flag, we must ensure
that we allocate them to stage-2 context banks if the hardware permits
it.
This patch adds support for the attribute to the ARM SMMU driver, with
the actual stage being determined depending on the features supported
by the hardware.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently the driver registers IOMMU bus operations for all busses even
if no ARM SMMU is present on a system. Depending on the driver probing
order this prevents the driver for the real IOMMU to register itself as
the bus-wide IOMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Some versions of GCC get unduly upset when confronted with a switch
that doesn't explicitly handle all cases of an enum, despite having an
implicit default case following the actualy switch statement:
drivers/iommu/amd_iommu.c: In function 'amd_iommu_capable':
>> drivers/iommu/amd_iommu.c:3409:2: warning: enumeration value 'IOMMU_CAP_NOEXEC' not handled in switch [-Wswitch]
switch (cap) {
This patch adds a case for IOMMU_CAP_NOEXEC to the amd IOMMU driver to
remove this warning.
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARM SMMU supports the IOMMU_NOEXEC protection flag. Add the
corresponding IOMMU capability.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Exposing the XN flag of the SMMU driver as IOMMU_NOEXEC instead of
IOMMU_EXEC makes it enforceable, since for IOMMUs that don't support
the XN flag pages will always be executable.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch fixes a bug in the accounting of the
device_state. In the current code, the device_state was put
(decremented) too many times, which sometimes lead to the
driver getting stuck permanently in put_device_state_wait().
That happen because the device_state->count would go below
zero, which is never supposed to happen.
The root cause is that the device_state was decremented in
put_pasid_state() and put_pasid_state_wait() but also in all
the functions that call those functions. Therefore, the
device_state was decremented twice in each of these code
paths.
The fix is to decouple the device_state accounting from the
pasid_state accounting - remove the call to
put_device_state() from the put_pasid_state() and the
put_pasid_state_wait())
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function context_set_address_root() and set_root_value are setting new
address in a wrong way, and this patch is trying to fix this problem.
According to Intel Vt-d specs(Feb 2011, Revision 1.3), Chapter 9.1 and 9.2,
field ctp in root entry is using bits 12:63, field asr in context entry is
using bits 12:63.
To set these fields, the following functions are used:
static inline void context_set_address_root(struct context_entry *context,
unsigned long value);
and
static inline void set_root_value(struct root_entry *root, unsigned long value)
But they are using an invalid method to set these fields, in current code, only
a '|' operator is used to set it. This will not set the asr to the expected
value if it has an old value.
For example:
Before calling this function,
context->lo = 0x3456789012111;
value = 0x123456789abcef12;
After we call context_set_address_root(context, value), expected result is
context->lo == 0x123456789abce111;
But the actual result is:
context->lo == 0x1237577f9bbde111;
So we need to clear bits 12:63 before setting the new value, this will fix
this problem.
Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When some part of bus_set_iommu fails it should undo any made changes
and not simply leave everything as is.
This includes unregistering the bus notifier in iommu_bus_init when
add_iommu_group fails and also setting the bus->iommu_ops back to NULL.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU-API works on page boundarys, unlike the DMA-API
which can work with sub-page buffers. The sg->offset
field does not make sense on the IOMMU level, so force it to
be 0. Do some error-path consolidation while at it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Mapping and unmapping are more often than not in the critical path.
map_sg allows IOMMU driver implementations to optimize the process
of mapping buffers into the IOMMU page tables.
Instead of mapping a buffer one page at a time and requiring potentially
expensive TLB operations for each page, this function allows the driver
to map all pages in one go and defer TLB maintenance until after all
pages have been mapped.
Additionally, the mapping operation would be faster in general since
clients does not have to keep calling map API over and over again for
each physically contiguous chunk of memory that needs to be mapped to a
virtually contiguous region.
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The rk3288 has several iommus. Each iommu belongs to a single master
device. There is one device (ISP) that has two slave iommus, but that
case is not yet supported by this driver.
At subsys init, the iommu driver registers itself as the iommu driver for
the platform bus. The master devices find their slave iommus using the
"iommus" field in their devicetree description. Since each slave iommu
belongs to exactly one master, their is no additional data needed at probe
to associate a slave with its master.
An iommu device's power domain, clock and irq are all shared with its
master device, and the master device must be careful to attach from the
iommu only after powering and clocking it (and leave it powered and
clocked before detaching). Because their is no guarantee what the status
of the iommu is at probe, and since the driver does not even know if the
device is powered, we delay requesting its irq until the master device
attaches, at which point we have a guarantee that the device is powered
and clocked and we can reset it and disable its interrupt mask.
An iommu_domain describes a virtual iova address space. Each iommu_domain
has a corresponding page table that lists the mappings from iova to
physical address.
For the rk3288 iommu, the page table has two levels:
The Level 1 "directory_table" has 1024 4-byte dte entries.
Each dte points to a level 2 "page_table".
Each level 2 page_table has 1024 4-byte pte entries.
Each pte points to a 4 KiB page of memory.
An iommu_domain is created when a dma_iommu_mapping is created via
arm_iommu_create_mapping. Master devices can then attach themselves to
this mapping (or attach the mapping to themselves?) by calling
arm_iommu_attach_device(). This in turn instructs the iommu driver to
write the page table's physical address into the slave iommu's "Directory
Table Entry" (DTE) register.
In fact multiple master devices, each with their own slave iommu device,
can all attach to the same mapping. The iommus for these devices will
share the same iommu_domain and therefore point to the same page table.
Thus, the iommu domain maintains a list of iommu devices which are
attached. This driver relies on the iommu core to ensure that all devices
have detached before destroying a domain.
v6: - add .add/remove_device() callbacks.
- parse platform_device device tree nodes for "iommus" property
- store platform device pointer as group iommudata
- Check for existence of iommu group instead of relying on a
dev_get_drvdata() to return NULL for a NULL device.
v7: - fixup some strings.
- In rk_iommu_disable_paging() # and % were reversed.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A semantic patch approach was proposed with the subject
"[PATCH with Coccinelle?] Deletion of unnecessary checks
before specific function calls" on 2014-03-05.
https://lkml.org/lkml/2014/3/5/344http://article.gmane.org/gmane.comp.version-control.coccinelle/3513/
This patch pattern application was repeated with the help of
the software "Coccinelle 1.0.0-rc22" on the source files for
Linux 3.17.1. An extract of the automatically generated
update suggestions is shown here.
It was determined that the affected source code places call
functions which perform input parameter validation already.
It is therefore not needed that a similar safety check is
repeated at the call site.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The debugfs entry 'pagetable' that shows the page table entry
(PTE) data currently outputs only data that can be fit into a
page. Switch the entry to use the seq_file interface so that
it can show all the valid page table entries.
The patch also corrected the output for L2 entries, and prints
the proper L2 PTE instead of the previous L1 page descriptor
pointer.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Any debugfs access on an OMAP IOMMU that is not enabled (done during
attach) results in a bus error due to access of registers without
the clock or the reset enabled for the respective IOMMU. So, add a
check to make sure the IOMMU is enabled/attached by a client device.
This gracefully prints a "Operation not permitted" trace when the
corresponding IOMMU is not enabled.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The .domain field in omap_iommu struct is set properly when the
OMAP IOMMU device is attached to, but is never reset properly
on detach. Reset this properly so that the OMAP IOMMU debugfs
logic can depend on this field before allowing the debugfs
operations.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The following functions were exported previously for usage by
the OMAP IOMMU debug module:
omap_iommu_dump_ctx()
omap_dump_tlb_entries()
omap_iopgtable_store_entry()
These functions need not be exported anymore as the OMAP IOMMU
debugfs code is integrated with the OMAP IOMMU driver, and
there won't be external users for these functions. So, remove
the EXPORT_SYMBOL_GPL on these. The omap_iopgtable_store_entry()
is also made internal only, after making the 'pagetable' debugfs
entry read-only.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The exported functions omap_foreach_iommu_device() and
omap_iotlb_cr_to_e() have been deleted, as they are no
longer needed.
The function omap_foreach_iommu_device() is not required
after the consolidation of the OMAP IOMMU debug module,
and the function omap_iotlb_cr_to_e() is not required
after making the debugfs entry 'pagetable' read-only.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The debugfs support for OMAP IOMMU is currently implemented
as a module, warranting certain OMAP-specific IOMMU API to
be exported. The OMAP IOMMU, when enabled, can only be built-in
into the kernel, so integrate the OMAP IOMMU debug module
into the OMAP IOMMU driver. This helps in eliminating the
need to export most of the current OMAP IOMMU API.
The following are the main changes:
- The debugfs directory and entry creation logic is reversed,
the calls are invoked by the OMAP IOMMU driver now.
- The current iffy circular logic of adding IOMMU archdata
to the IOMMU devices itself to get a pointer to the omap_iommu
object in the debugfs support code is replaced by directly
using the omap_iommu structure while creating the debugfs
entries.
- The debugfs root directory is renamed from the generic name
"iommu" to a specific name "omap_iommu".
- Unneeded headers have also been cleaned up while at this.
- There will no longer be a omap-iommu-debug.ko module after
this patch.
- The OMAP_IOMMU_DEBUG Kconfig option is converted to boolean
only, the OMAP IOMMU debugfs support is built alongside the
OMAP IOMMU driver only when this option is enabled.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove the writeability on the 'pagetable' debugfs entry,
so that the mapping/unmapping into an OMAP IOMMU is only
limited to actual client devices/drivers at kernel-level.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The permissions on the debugfs entry "nr_tlb_entries" should
have been octal, not decimal, so fix it.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP IOMMU driver was originally designed as modules, and split
into a core module and a thin arch-specific module through the OMAP
arch-specific struct iommu_functions, to scale for both OMAP1 and
OMAP2+ IOMMU variants. The driver can only be built for OMAP2+
platforms currently, and also can only be built-in after the
adaptation to generic IOMMU API. The OMAP1 variant was never added
and will most probably be never added (the code for the only potential
user, its parent, DSP processor has already been cleaned up). So,
consolidate the OMAP2 specific omap-iommu2 module into the core OMAP
IOMMU driver - this eliminates the arch-specific ops structure and
simplifies the driver into a single module that only implements the
generic IOMMU API's iommu_ops.
The following are the main changes:
- omap-iommu2 module is completely eliminated, with the common
definitions moved to the internal omap-iommu.h, and the ops
implementations moved into omap-iommu.c
- OMAP arch-specific struct iommu_functions is also eliminated,
with the ops implementations directly absorbed into the calling
functions
- iotlb_alloc_cr() is no longer inlined and defined only when
PREFETCH_IOTLB is defined
- iotlb_dump_cr() is similarly defined only when CONFIG_OMAP_IOMMU_DEBUG
is defined
- Elimination of the OMAP IOMMU exported functions to register the
arch ops, omap_install_iommu_arch() & omap_uninstall_iommu_arch()
- Any stale comments about OMAP1 are also cleaned up
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function omap2_iommu_fault_isr() does an unnecessary
recomputation of the return value. The logic relies on
setting the same bit fields as the MMU fault error status
bits, so simplify this function and remove the unneeded
macros. These macros were originally exported to notify
MMU faults to users prior to the IOMMU framework adaptation,
but are now redundant.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The omap2_iommu_save_ctx() and omap2_iommu_restore_ctx()
performs a sanity version check against a fixed value
that is correct only for OMAP2/OMAP3 IOMMUs. This fixed check
does not scale for all OMAP2+ IOMMUs and is not absolutely
required, so it has been removed.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function omap_iommu_arch_version() is not used anymore,
and is not required either, so remove it. The .version field
in struct iommu_functions that this function uses is also
removed, as it is not really an ops to retrieve a version and
there won't be any usage for this field either.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The debugfs entry 'ver' to read the OMAP IOMMU version is
not much useful for developers, so it has been removed. The
same can be deduced from the register dump, provided by the
debugfs entry 'regs', REVISION register. This also allows us
to remove the omap_iommu_arch_revision() which is currently
returning a fixed value.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The dev_to_omap_iommu() is local to the OMAP IOMMU modules, and
need not be defined conditionally. The CONFIG_IOMMU_API dependency
check was added in the past to fix a compilation issue back when
the header resided in the arch/arm layers, and is no longer
needed.
While at this, fix the header against double inclusion as well.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The omap_iommu_save_ctx() and omap_iommu_restore_ctx() declarations
are defined in include/linux/omap-iommu.h and do not belong in the
internal drivers/iommu/omap-iommu.h header, so remove them.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The isr_priv field is a left-over from before the IOMMU API
adaptation, this was used to store the callback data. This is
no longer relevant, so remove it.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The refcount field in omap_iommu object is primarily used to check
if an IOMMU device has already been enabled, but this is already
implicit in the omap_iommu_attach_dev() which ensures that only
a single device can attach to an IOMMU. This field is redundant,
and so has been cleaned up.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This pull-request includes:
* Change in the IOMMU-API to convert the former iommu_domain_capable
function to just iommu_capable
* Various fixes in handling RMRR ranges for the VT-d driver (one fix
requires a device driver core change which was acked
by Greg KH)
* The AMD IOMMU driver now assigns and deassigns complete alias groups
to fix issues with devices using the wrong PCI request-id
* MMU-401 support for the ARM SMMU driver
* Multi-master IOMMU group support for the ARM SMMU driver
* Various other small fixes all over the place
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OMOt
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"This pull-request includes:
- change in the IOMMU-API to convert the former iommu_domain_capable
function to just iommu_capable
- various fixes in handling RMRR ranges for the VT-d driver (one fix
requires a device driver core change which was acked by Greg KH)
- the AMD IOMMU driver now assigns and deassigns complete alias
groups to fix issues with devices using the wrong PCI request-id
- MMU-401 support for the ARM SMMU driver
- multi-master IOMMU group support for the ARM SMMU driver
- various other small fixes all over the place"
* tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
iommu/vt-d: Work around broken RMRR firmware entries
iommu/vt-d: Store bus information in RMRR PCI device path
iommu/vt-d: Only remove domain when device is removed
driver core: Add BUS_NOTIFY_REMOVED_DEVICE event
iommu/amd: Fix devid mapping for ivrs_ioapic override
iommu/irq_remapping: Fix the regression of hpet irq remapping
iommu: Fix bus notifier breakage
iommu/amd: Split init_iommu_group() from iommu_init_device()
iommu: Rework iommu_group_get_for_pci_dev()
iommu: Make of_device_id array const
amd_iommu: do not dereference a NULL pointer address.
iommu/omap: Remove omap_iommu unused owner field
iommu: Remove iommu_domain_has_cap() API function
IB/usnic: Convert to use new iommu_capable() API function
vfio: Convert to use new iommu_capable() API function
kvm: iommu: Convert to use new iommu_capable() API function
iommu/tegra: Convert to iommu_capable() API function
iommu/msm: Convert to iommu_capable() API function
iommu/vt-d: Convert to iommu_capable() API function
iommu/fsl: Convert to iommu_capable() API function
...
Apart from the usual cleanups, here is the summary of new features:
- s390 moves closer towards host large page support
- PowerPC has improved support for debugging (both inside the guest and
via gdbstub) and support for e6500 processors
- ARM/ARM64 support read-only memory (which is necessary to put firmware
in emulated NOR flash)
- x86 has the usual emulator fixes and nested virtualization improvements
(including improved Windows support on Intel and Jailhouse hypervisor
support on AMD), adaptive PLE which helps overcommitting of huge guests.
Also included are some patches that make KVM more friendly to memory
hot-unplug, and fixes for rare caching bugs.
Two patches have trivial mm/ parts that were acked by Rik and Andrew.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=iEVi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Fixes and features for 3.18.
Apart from the usual cleanups, here is the summary of new features:
- s390 moves closer towards host large page support
- PowerPC has improved support for debugging (both inside the guest
and via gdbstub) and support for e6500 processors
- ARM/ARM64 support read-only memory (which is necessary to put
firmware in emulated NOR flash)
- x86 has the usual emulator fixes and nested virtualization
improvements (including improved Windows support on Intel and
Jailhouse hypervisor support on AMD), adaptive PLE which helps
overcommitting of huge guests. Also included are some patches that
make KVM more friendly to memory hot-unplug, and fixes for rare
caching bugs.
Two patches have trivial mm/ parts that were acked by Rik and Andrew.
Note: I will soon switch to a subkey for signing purposes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (157 commits)
kvm: do not handle APIC access page if in-kernel irqchip is not in use
KVM: s390: count vcpu wakeups in stat.halt_wakeup
KVM: s390/facilities: allow TOD-CLOCK steering facility bit
KVM: PPC: BOOK3S: HV: CMA: Reserve cma region only in hypervisor mode
arm/arm64: KVM: Report correct FSC for unsupported fault types
arm/arm64: KVM: Fix VTTBR_BADDR_MASK and pgd alloc
kvm: Fix kvm_get_page_retry_io __gup retval check
arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset
kvm: x86: Unpin and remove kvm_arch->apic_access_page
kvm: vmx: Implement set_apic_access_page_addr
kvm: x86: Add request bit to reload APIC access page address
kvm: Add arch specific mmu notifier for page invalidation
kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static
kvm: Fix page ageing bugs
kvm/x86/mmu: Pass gfn and level to rmapp callback.
x86: kvm: use alternatives for VMCALL vs. VMMCALL if kernel text is read-only
kvm: x86: use macros to compute bank MSRs
KVM: x86: Remove debug assertion of non-PAE reserved bits
kvm: don't take vcpu mutex for obviously invalid vcpu ioctls
kvm: Faults which trigger IO release the mmap_sem
...
The VT-d specification states that an RMRR entry in the DMAR
table needs to specify the full path to the device. This is
also how newer Linux kernels implement it.
Unfortunatly older drivers just match for the target device
and not the full path to the device, so that BIOS vendors
implement that behavior into their BIOSes to make them work
with older Linux kernels. But those RMRR entries break on
newer Linux kernels.
Work around this issue by adding a fall-back into the RMRR
matching code to match those old RMRR entries too.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This makes sure any RMRR mappings stay in place when the
driver is unbound from the device.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jerry Hoemann <jerry.hoemann@hp.com>
When the device id for an IOAPIC is overridden on the kernel
command line, the iommu driver has to make sure it sets up a
DTE for this device id.
Reported-by: Su Friendy <friendy.su@sony.com.cn>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 71054d8841 ("x86, hpet: Introduce x86_msi_ops.setup_hpet_msi")
introduced x86_msi_ops.setup_hpet_msi to setup hpet MSI irq
when irq remapping enabled. This caused a regression of
hpet MSI irq remapping.
Original code flow before commit 71054d8841b4:
hpet_setup_msi_irq()
arch_setup_hpet_msi()
setup_hpet_msi_remapped()
remap_ops->setup_hpet_msi()
alloc_irte()
msi_compose_msg()
hpet_msi_write()
...
Current code flow after commit 71054d8841b4:
hpet_setup_msi_irq()
x86_msi.setup_hpet_msi()
setup_hpet_msi_remapped()
intel_setup_hpet_msi()
alloc_irte()
Currently, we only call alloc_irte() for hpet MSI, but
do not composed and wrote its msg...
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_bus_init() registers a bus notifier on the given bus by using
a statically defined notifier block:
static struct notifier_block iommu_bus_nb = {
.notifier_call = iommu_bus_notifier,
};
This same notifier block is used for all busses. This causes a
problem for notifiers registered after iommu has registered this
callback on multiple busses. The problem is that a subsequent
notifier being registered on a bus which has this iommu notifier
will also get linked in to the notifier list of all other busses
which have this iommu notifier.
This patch fixes this by allocating the notifier_block at runtime.
Some error checking is also added to catch any allocation failure
or notifier registration error.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For a PCI device, aliases from the IVRS table won't be populated
into dma_alias_devfn until after iommu_init_device() is called on
each device. We therefore want to split init_iommu_group() to
be called from a separate loop immediately following.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org # 3.17
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It turns out that our assumption that aliases are always to the same
slot isn't true. One particular platform reports an IVRS alias of the
SATA controller (00:11.0) for the legacy IDE controller (00:14.1).
When we hit this, we attempt to use a single IOMMU group for
everything on the same bus, which in this case is the root complex.
We already have multiple groups defined for the root complex by this
point, resulting in multiple WARN_ON hits.
This patch makes these sorts of aliases work again with IOMMU groups
by reworking how we search through the PCI address space to find
existing groups. This should also now handle looped dependencies and
all sorts of crazy inter-dependencies that we'll likely never see.
The recursion used here should never be very deep. It's unlikely to
have individual aliases and only theoretical that we'd ever see a
chain where one alias causes us to search through to yet another
alias. We're also only dealing with PCIe device on a single bus,
which means we'll typically only see multiple slots in use on the root
complex. Loops are also a theoretically possibility, which I've
tested using fake DMA alias quirks and prevent from causing problems
using a bitmap of the devfn space that's been visited.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org # 3.17
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
under low memory conditions, alloc_pte() may return a NULL pointer.
iommu_map_page() does not check it and will panic the system.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The owner field is never set. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This function will replace the current iommu_domain_has_cap
function and clean up the interface while at it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Jiang Liu
Joerg Roedel
Thomas Gleixner
Wolfram Sang
Laurent Pinchart
Linus Torvalds
Mark Brown
Jesse Barnes
Dave Airlie
Robin Murphy
Thierry Reding
Marek Szyprowski
Will Deacon
Antonios Motakis
Oded Gabbay
Li, Zhen-Hua
Axel Lin
Kiran Padwal
Heiko Stübner
Olav Haugan
Daniel Kurtz
SF Markus Elfring
Suman Anna
Yijing Wang
Mark Salter
Alex Williamson
Maurizio Lombardi
Laurent Pinchart