Граф коммитов

968367 Коммитов

Автор SHA1 Сообщение Дата
Oliver Hartkopp 323a391a22 can: isotp: isotp_setsockopt(): block setsockopt on bound sockets
The isotp socket can be widely configured in its behaviour regarding addressing
types, fill-ups, receive pattern tests and link layer length. Usually all
these settings need to be fixed before bind() and can not be changed
afterwards.

This patch adds a check to enforce the common usage pattern.

Fixes: e057dd3fc2 ("can: add ISO 15765-2:2016 transport protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Thomas Wagner <thwa1@web.de>
Link: https://lore.kernel.org/r/20201203140604.25488-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20201204133508.742120-3-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09 08:44:15 -08:00
Eric Dumazet 72d05c00d7 tcp: select sane initial rcvq_space.space for big MSS
Before commit a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
small tcp_rmem[1] values were overridden by tcp_fixup_rcvbuf() to accommodate various MSS.

This is no longer the case, and Hazem Mohamed Abuelfotoh reported
that DRS would not work for MTU 9000 endpoints receiving regular (1500 bytes) frames.

Root cause is that tcp_init_buffer_space() uses tp->rcv_wnd for upper limit
of rcvq_space.space computation, while it can select later a smaller
value for tp->rcv_ssthresh and tp->window_clamp.

ss -temoi on receiver would show :

skmem:(r0,rb131072,t0,tb46080,f0,w0,o0,bl0,d0) rcv_space:62496 rcv_ssthresh:56596

This means that TCP can not increase its window in tcp_grow_window(),
and that DRS can never kick.

Fix this by making sure that rcvq_space.space is not bigger than number of bytes
that can be held in TCP receive queue.

People unable/unwilling to change their kernel can work around this issue by
selecting a bigger tcp_rmem[1] value as in :

echo "4096 196608 6291456" >/proc/sys/net/ipv4/tcp_rmem

Based on an initial report and patch from Hazem Mohamed Abuelfotoh
 https://lore.kernel.org/netdev/20201204180622.14285-1-abuehaze@amazon.com/

Fixes: a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Fixes: 041a14d267 ("tcp: start receiver buffer autotuning sooner")
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08 16:27:48 -08:00
Zhang Changzhong cc6596fc72 net: ll_temac: Fix potential NULL dereference in temac_probe()
platform_get_resource() may fail and in this case a NULL dereference
will occur.

Fix it to use devm_platform_ioremap_resource() instead of calling
platform_get_resource() and devm_ioremap().

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Fixes: 8425c41d1e ("net: ll_temac: Extend support to non-device-tree platforms")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08 16:15:46 -08:00
Cengiz Can 0398ba9e5a net: tipc: prevent possible null deref of link
`tipc_node_apply_property` does a null check on a `tipc_link_entry`
pointer but also accesses the same pointer out of the null check block.

This triggers a warning on Coverity Static Analyzer because we're
implying that `e->link` can BE null.

Move "Update MTU for node link entry" line into if block to make sure
that we're not in a state that `e->link` is null.

Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08 15:53:41 -08:00
David S. Miller 9756bb63e8 Merge branch 'stmmac-fixes'
Joakim Zhang says:

====================
patches for stmmac

A patch set for stmmac, fix some driver issues.

ChangeLogs:
V1->V2:
	* add Fixes tag.
	* add patch 5/5 into this patch set.

V2->V3:
	* rebase to latest net tree where fixes go.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08 14:52:29 -08:00
Fugang Duan f119cc9818 net: stmmac: overwrite the dma_cap.addr64 according to HW design
The current IP register MAC_HW_Feature1[ADDR64] only defines
32/40/64 bit width, but some SOCs support others like i.MX8MP
support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64].
So overwrite dma_cap.addr64 according to HW real design.

Fixes: 94abdad697 ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08 14:52:29 -08:00
Fugang Duan 5f58591323 net: stmmac: delete the eee_ctrl_timer after napi disabled
There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.

It is safe to delete the timer after napi disabled and disable lpi mode.

Fixes: d765955d2a ("stmmac: add the Energy Efficient Ethernet support")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08 14:52:29 -08:00
Fugang Duan 4ec236c7c5 net: stmmac: free tx skb buffer in stmmac_resume()
When do suspend/resume test, there have WARN_ON() log dump from
stmmac_xmit() funciton, the code logic:
	entry = tx_q->cur_tx;
	first_entry = entry;
	WARN_ON(tx_q->tx_skbuff[first_entry]);

In normal case, tx_q->tx_skbuff[txq->cur_tx] should be NULL because
the skb should be handled and freed in stmmac_tx_clean().

But stmmac_resume() reset queue parameters like below, skb buffers
may not be freed.
	tx_q->cur_tx = 0;
	tx_q->dirty_tx = 0;

So free tx skb buffer in stmmac_resume() to avoid warning and
memory leak.

log:
[   46.139824] ------------[ cut here ]------------
[   46.144453] WARNING: CPU: 0 PID: 0 at drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3235 stmmac_xmit+0x7a0/0x9d0
[   46.154969] Modules linked in: crct10dif_ce vvcam(O) flexcan can_dev
[   46.161328] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O      5.4.24-2.1.0+g2ad925d15481 #1
[   46.170369] Hardware name: NXP i.MX8MPlus EVK board (DT)
[   46.175677] pstate: 80000005 (Nzcv daif -PAN -UAO)
[   46.180465] pc : stmmac_xmit+0x7a0/0x9d0
[   46.184387] lr : dev_hard_start_xmit+0x94/0x158
[   46.188913] sp : ffff800010003cc0
[   46.192224] x29: ffff800010003cc0 x28: ffff000177e2a100
[   46.197533] x27: ffff000176ef0840 x26: ffff000176ef0090
[   46.202842] x25: 0000000000000000 x24: 0000000000000000
[   46.208151] x23: 0000000000000003 x22: ffff8000119ddd30
[   46.213460] x21: ffff00017636f000 x20: ffff000176ef0cc0
[   46.218769] x19: 0000000000000003 x18: 0000000000000000
[   46.224078] x17: 0000000000000000 x16: 0000000000000000
[   46.229386] x15: 0000000000000079 x14: 0000000000000000
[   46.234695] x13: 0000000000000003 x12: 0000000000000003
[   46.240003] x11: 0000000000000010 x10: 0000000000000010
[   46.245312] x9 : ffff00017002b140 x8 : 0000000000000000
[   46.250621] x7 : ffff00017636f000 x6 : 0000000000000010
[   46.255930] x5 : 0000000000000001 x4 : ffff000176ef0000
[   46.261238] x3 : 0000000000000003 x2 : 00000000ffffffff
[   46.266547] x1 : ffff000177e2a000 x0 : 0000000000000000
[   46.271856] Call trace:
[   46.274302]  stmmac_xmit+0x7a0/0x9d0
[   46.277874]  dev_hard_start_xmit+0x94/0x158
[   46.282056]  sch_direct_xmit+0x11c/0x338
[   46.285976]  __qdisc_run+0x118/0x5f0
[   46.289549]  net_tx_action+0x110/0x198
[   46.293297]  __do_softirq+0x120/0x23c
[   46.296958]  irq_exit+0xb8/0xd8
[   46.300098]  __handle_domain_irq+0x64/0xb8
[   46.304191]  gic_handle_irq+0x5c/0x148
[   46.307936]  el1_irq+0xb8/0x180
[   46.311076]  cpuidle_enter_state+0x84/0x360
[   46.315256]  cpuidle_enter+0x34/0x48
[   46.318829]  call_cpuidle+0x18/0x38
[   46.322314]  do_idle+0x1e0/0x280
[   46.325539]  cpu_startup_entry+0x24/0x40
[   46.329460]  rest_init+0xd4/0xe0
[   46.332687]  arch_call_rest_init+0xc/0x14
[   46.336695]  start_kernel+0x420/0x44c
[   46.340353] ---[ end trace bc1ee695123cbacd ]---

Fixes: 47dd7a540b ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08 14:52:29 -08:00
Fugang Duan 36d18b5664 net: stmmac: start phylink instance before stmmac_hw_setup()
Start phylink instance and resume back the PHY to supply
RX clock to MAC before MAC layer initialization by calling
.stmmac_hw_setup(), since DMA reset depends on the RX clock,
otherwise DMA reset cost maximum timeout value then finally
timeout.

Fixes: 74371272f9 ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08 14:52:29 -08:00
Fugang Duan 9d14edfdea net: stmmac: increase the timeout for dma reset
Current timeout value is not enough for gmac5 dma reset
on imx8mp platform, increase the timeout range.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08 14:52:29 -08:00
Jarod Wilson 007ab53455 bonding: fix feature flag setting at init time
Don't try to adjust XFRM support flags if the bond device isn't yet
registered. Bad things can currently happen when netdev_change_features()
is called without having wanted_features fully filled in yet. This code
runs both on post-module-load mode changes, as well as at module init
time, and when run at module init time, it is before register_netdevice()
has been called and filled in wanted_features. The empty wanted_features
led to features also getting emptied out, which was definitely not the
intended behavior, so prevent that from happening.

Originally, I'd hoped to stop adjusting wanted_features at all in the
bonding driver, as it's documented as being something only the network
core should touch, but we actually do need to do this to properly update
both the features and wanted_features fields when changing the bond type,
or we get to a situation where ethtool sees:

    esp-hw-offload: off [requested on]

I do think we should be using netdev_update_features instead of
netdev_change_features here though, so we only send notifiers when the
features actually changed.

Fixes: a3b658cfb6 ("bonding: allow xfrm offload setup post-module-load")
Reported-by: Ivan Vecera <ivecera@redhat.com>
Suggested-by: Ivan Vecera <ivecera@redhat.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-08 11:26:08 -08:00
Jakub Kicinski 819f56bad1 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2020-12-07

1) Sysbot reported fixes for the new 64/32 bit compat layer.
   From Dmitry Safonov.

2) Fix a memory leak in xfrm_user_policy that was introduced
   by adding the 64/32 bit compat layer. From Yu Kuai.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  net: xfrm: fix memory leak in xfrm_user_policy()
  xfrm/compat: Don't allocate memory with __GFP_ZERO
  xfrm/compat: memset(0) 64-bit padding at right place
  xfrm/compat: Translate by copying XFRMA_UNSPEC attribute
====================

Link: https://lore.kernel.org/r/20201207093937.2874932-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07 18:29:54 -08:00
Martin Blumenstingl 82ca4c922b net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux
The m250_sel mux clock uses bit 4 in the PRG_ETH0 register. Fix this by
shifting the PRG_ETH0_CLK_M250_SEL_MASK accordingly as the "mask" in
struct clk_mux expects the mask relative to the "shift" field in the
same struct.

While here, get rid of the PRG_ETH0_CLK_M250_SEL_SHIFT macro and use
__ffs() to determine it from the existing PRG_ETH0_CLK_M250_SEL_MASK
macro.

Fixes: 566e825162 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201205213207.519341-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07 17:58:22 -08:00
Christophe JAILLET bbef72c630 dpaa2-mac: Add a missing of_node_put after of_device_is_available
Add an 'of_node_put()' call when a tested device node is not available.

Fixes: 94ae899b20 ("dpaa2-mac: add PCS support through the Lynx module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201206151339.44306-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07 17:57:19 -08:00
Jianguo Wu f55628b3e7 mptcp: print new line in mptcp_seq_show() if mptcp isn't in use
When do cat /proc/net/netstat, the output isn't append with a new line, it looks like this:
[root@localhost ~]# cat /proc/net/netstat
...
MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0[root@localhost ~]#

This is because in mptcp_seq_show(), if mptcp isn't in use, net->mib.mptcp_statistics is NULL,
so it just puts all 0 after "MPTcpExt:", and return, forgot the '\n'.

After this patch:

[root@localhost ~]# cat /proc/net/netstat
...
MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0
[root@localhost ~]#

Fixes: fc518953bc ("mptcp: add and use MIB counter infrastructure")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/142e2fd9-58d9-bb13-fb75-951cccc2331e@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07 17:45:29 -08:00
Joseph Huang 851d0a73c9 bridge: Fix a deadlock when enabling multicast snooping
When enabling multicast snooping, bridge module deadlocks on multicast_lock
if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2
network.

The deadlock was caused by the following sequence: While holding the lock,
br_multicast_open calls br_multicast_join_snoopers, which eventually causes
IP stack to (attempt to) send out a Listener Report (in igmp6_join_group).
Since the destination Ethernet address is a multicast address, br_dev_xmit
feeds the packet back to the bridge via br_multicast_rcv, which in turn
calls br_multicast_add_group, which then deadlocks on multicast_lock.

The fix is to move the call br_multicast_join_snoopers outside of the
critical section. This works since br_multicast_join_snoopers only deals
with IP and does not modify any multicast data structures of the bridge,
so there's no need to hold the lock.

Steps to reproduce:
1. sysctl net.ipv6.conf.all.force_mld_version=1
2. have another querier
3. ip link set dev bridge type bridge mcast_snooping 0 && \
   ip link set dev bridge type bridge mcast_snooping 1 < deadlock >

A typical call trace looks like the following:

[  936.251495]  _raw_spin_lock+0x5c/0x68
[  936.255221]  br_multicast_add_group+0x40/0x170 [bridge]
[  936.260491]  br_multicast_rcv+0x7ac/0xe30 [bridge]
[  936.265322]  br_dev_xmit+0x140/0x368 [bridge]
[  936.269689]  dev_hard_start_xmit+0x94/0x158
[  936.273876]  __dev_queue_xmit+0x5ac/0x7f8
[  936.277890]  dev_queue_xmit+0x10/0x18
[  936.281563]  neigh_resolve_output+0xec/0x198
[  936.285845]  ip6_finish_output2+0x240/0x710
[  936.290039]  __ip6_finish_output+0x130/0x170
[  936.294318]  ip6_output+0x6c/0x1c8
[  936.297731]  NF_HOOK.constprop.0+0xd8/0xe8
[  936.301834]  igmp6_send+0x358/0x558
[  936.305326]  igmp6_join_group.part.0+0x30/0xf0
[  936.309774]  igmp6_group_added+0xfc/0x110
[  936.313787]  __ipv6_dev_mc_inc+0x1a4/0x290
[  936.317885]  ipv6_dev_mc_inc+0x10/0x18
[  936.321677]  br_multicast_open+0xbc/0x110 [bridge]
[  936.326506]  br_multicast_toggle+0xec/0x140 [bridge]

Fixes: 4effd28c12 ("bridge: join all-snoopers multicast address")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07 17:14:43 -08:00
Claudiu Manoil eb96b686fc enetc: Fix reporting of h/w packet counters
Noticed some inconsistencies in packet statistics reporting.
This patch adds the missing Tx packet counter registers to
ethtool reporting and fixes the information strings for a
few of them.

Fixes: 16eb4c85c9 ("enetc: Add ethtool statistics")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201204171505.21389-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07 16:57:38 -08:00
Xin Long 10c678bd0a udp: fix the proto value passed to ip_protocol_deliver_rcu for the segments
Guillaume noticed that: for segments udp_queue_rcv_one_skb() returns the
proto, and it should pass "ret" unmodified to ip_protocol_deliver_rcu().
Otherwize, with a negtive value passed, it will underflow inet_protos.

This can be reproduced with IPIP FOU:

  # ip fou add port 5555 ipproto 4
  # ethtool -K eth1 rx-gro-list on

Fixes: cf329aa42b ("udp: cope with UDP GRO packet misdirection")
Reported-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-07 00:32:11 -08:00
Huazhong Tan 61f54de2e9 net: hns3: remove a misused pragma packed
hclge_dbg_reg_info[] is defined as an array of packed structure
accidentally. However, this array contains pointers, which are
no longer aligned naturally, and cannot be relocated on PPC64.
Hence, when compile-testing this driver on PPC64 with
CONFIG_RELOCATABLE=y (e.g. PowerPC allyesconfig), there will be
some warnings.

Since each field in structure hclge_qos_pri_map_cmd and
hclge_dbg_bitmap_cmd is type u8, the pragma packed is unnecessary
for these two structures as well, so remove the pragma packed in
hclge_debugfs.h to fix this issue, and this increases
hclge_dbg_reg_info[] by 4 bytes per entry.

Fixes: a582b78dfc ("net: hns3: code optimization for debugfs related to "dump reg"")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-06 23:38:33 -08:00
Vladimir Oltean edd2410b16 net: mscc: ocelot: fix dropping of unknown IPv4 multicast on Seville
The current assumption is that the felix DSA driver has flooding knobs
per traffic class, while ocelot switchdev has a single flooding knob.
This was correct for felix VSC9959 and ocelot VSC7514, but with the
introduction of seville VSC9953, we see a switch driven by felix.c which
has a single flooding knob.

So it is clear that we must do what should have been done from the
beginning, which is not to overwrite the configuration done by ocelot.c
in felix, but instead to teach the common ocelot library about the
differences in our switches, and set up the flooding PGIDs centrally.

The effect that the bogus iteration through FELIX_NUM_TC has upon
seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and
ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will
actually overwrite ANA_FLOODING_IPMC when attempting to write
ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING.

And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect
is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D:
	MC6_DATA = 61,
	MC6_CTRL = 61,
	MC4_DATA = 60,
	MC4_CTRL = 0.
Because MC4_CTRL is zero, this means that IPv4 multicast control packets
are not flooded, but dropped. An invalid configuration, and this is how
the issue was actually spotted.

Reported-by: Eldar Gasanov <eldargasanov2@gmail.com>
Reported-by: Maxim Kochetkov <fido_max@inbox.ru>
Tested-by: Eldar Gasanov <eldargasanov2@gmail.com>
Fixes: 84705fc165 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes: 3c7b51bd39 ("net: dsa: felix: allow flooding for all traffic classes")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05 15:41:34 -08:00
Zhang Changzhong 4de377b659 net: marvell: prestera: Fix error return code in prestera_port_create()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 501ef3066c ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1607071782-34006-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05 14:04:55 -08:00
Stephen Suryaputra 205704c618 vrf: packets with lladdr src needs dst at input with orig_iif when needs strict
Depending on the order of the routes to fe80::/64 are installed on the
VRF table, the NS for the source link-local address of the originator
might be sent to the wrong interface.

This patch ensures that packets with link-local addr source is doing a
lookup with the orig_iif when the destination addr indicates that it
is strict.

Add the reproducer as a use case in self test script fcnal-test.sh.

Fixes: b4869aa2f8 ("net: vrf: ipv6 support for local traffic to local addresses")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201204030604.18828-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05 13:46:07 -08:00
Zhang Qilong 4d1be581ec can: softing: softing_netdev_open(): fix error handling
If softing_netdev_open() fails, we should call close_candev() to avoid
reference leak.

Fixes: 03fd3cf5a1 ("can: add driver for Softing card")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Link: https://lore.kernel.org/r/20201202151632.1343786-1-zhangqilong3@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20201204133508.742120-2-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05 13:08:11 -08:00
Arnd Bergmann a54ba3465d ch_ktls: fix build warning for ipv4-only config
When CONFIG_IPV6 is disabled, clang complains that a variable
is uninitialized for non-IPv4 data:

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1046:6: error: variable 'cntrl1' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
        if (tx_info->ip_family == AF_INET) {
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1059:2: note: uninitialized use occurs here
        cntrl1 |= T6_TXPKT_ETHHDR_LEN_V(maclen - ETH_HLEN) |
        ^~~~~~

Replace the preprocessor conditional with the corresponding C version,
and make the ipv4 case unconditional in this configuration to improve
readability and avoid the warning.

Fixes: 86716b51d1 ("ch_ktls: Update cheksum information")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201203222641.964234-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05 12:56:21 -08:00
Eric Dumazet 905b2032fa mac80211: mesh: fix mesh_pathtbl_init() error path
If tbl_mpp can not be allocated, we call mesh_table_free(tbl_path)
while tbl_path rhashtable has not yet been initialized, which causes
panics.

Simply factorize the rhashtable_init() call into mesh_table_alloc()

WARNING: CPU: 1 PID: 8474 at kernel/workqueue.c:3040 __flush_work kernel/workqueue.c:3040 [inline]
WARNING: CPU: 1 PID: 8474 at kernel/workqueue.c:3040 __cancel_work_timer+0x514/0x540 kernel/workqueue.c:3136
Modules linked in:
CPU: 1 PID: 8474 Comm: syz-executor663 Not tainted 5.10.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__flush_work kernel/workqueue.c:3040 [inline]
RIP: 0010:__cancel_work_timer+0x514/0x540 kernel/workqueue.c:3136
Code: 5d c3 e8 bf ae 29 00 0f 0b e9 f0 fd ff ff e8 b3 ae 29 00 0f 0b 43 80 3c 3e 00 0f 85 31 ff ff ff e9 34 ff ff ff e8 9c ae 29 00 <0f> 0b e9 dc fe ff ff 89 e9 80 e1 07 80 c1 03 38 c1 0f 8c 7d fd ff
RSP: 0018:ffffc9000165f5a0 EFLAGS: 00010293
RAX: ffffffff814b7064 RBX: 0000000000000001 RCX: ffff888021c80000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888024039ca0 R08: dffffc0000000000 R09: fffffbfff1dd3e64
R10: fffffbfff1dd3e64 R11: 0000000000000000 R12: 1ffff920002cbebd
R13: ffff888024039c88 R14: 1ffff11004807391 R15: dffffc0000000000
FS:  0000000001347880(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000140 CR3: 000000002cc0a000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 rhashtable_free_and_destroy+0x25/0x9c0 lib/rhashtable.c:1137
 mesh_table_free net/mac80211/mesh_pathtbl.c:69 [inline]
 mesh_pathtbl_init+0x287/0x2e0 net/mac80211/mesh_pathtbl.c:785
 ieee80211_mesh_init_sdata+0x2ee/0x530 net/mac80211/mesh.c:1591
 ieee80211_setup_sdata+0x733/0xc40 net/mac80211/iface.c:1569
 ieee80211_if_add+0xd5c/0x1cd0 net/mac80211/iface.c:1987
 ieee80211_add_iface+0x59/0x130 net/mac80211/cfg.c:125
 rdev_add_virtual_intf net/wireless/rdev-ops.h:45 [inline]
 nl80211_new_interface+0x563/0xb40 net/wireless/nl80211.c:3855
 genl_family_rcv_msg_doit net/netlink/genetlink.c:739 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
 genl_rcv_msg+0xe4e/0x1280 net/netlink/genetlink.c:800
 netlink_rcv_skb+0x190/0x3a0 net/netlink/af_netlink.c:2494
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x780/0x930 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0x9a8/0xd40 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg net/socket.c:671 [inline]
 ____sys_sendmsg+0x519/0x800 net/socket.c:2353
 ___sys_sendmsg net/socket.c:2407 [inline]
 __sys_sendmsg+0x2b1/0x360 net/socket.c:2440
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 60854fd945 ("mac80211: mesh: convert path table to rhashtable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://lore.kernel.org/r/20201204162428.2583119-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 17:34:25 -08:00
Wang Hai bb2da7651a openvswitch: fix error return code in validate_and_copy_dec_ttl()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Changing 'return start' to 'return action_start' can fix this bug.

Fixes: 69929d4c49 ("net: openvswitch: fix TTL decrement action netlink message format")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20201204114314.1596-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 15:43:14 -08:00
Zhang Changzhong ee4f52a8de net: bridge: vlan: fix error return code in __vlan_add()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: f8ed289fab ("bridge: vlan: use br_vlan_(get|put)_master to deal with refcounts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/1607071737-33875-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 15:41:06 -08:00
Zhang Changzhong b410f04eb5 ipv4: fix error return code in rtm_to_fib_config()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: d15662682d ("ipv4: Allow ipv6 gateway with ipv4 routes")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1607071695-33740-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 15:38:16 -08:00
Arnd Bergmann 0b32e91fdf ethernet: select CONFIG_CRC32 as needed
A number of ethernet drivers require crc32 functionality to be
avaialable in the kernel, causing a link error otherwise:

arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast':
et131x.c:(.text+0x5918): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit':
macb_main.c:(.text+0x4b88): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode':
ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list':
fec_main.c:(.text+0x6120): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address':
fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow
arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read':
nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire':
nfp_resource.c:(.text+0x144): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list':
lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do':
rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del':
rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb':
arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index':
dr_ste.c:(.text+0x354): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast':
lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le'

Add the missing 'select CRC32' entries in Kconfig for each of them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 14:42:21 -08:00
Alex Elder 1130b25248 net: ipa: pass the correct size when freeing DMA memory
When the coherent memory is freed in gsi_trans_pool_exit_dma(), we
are mistakenly passing the size of a single element in the pool
rather than the actual allocated size.  Fix this bug.

Fixes: 9dd441e4ed ("soc: qcom: ipa: GSI transactions")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201203215106.17450-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 14:38:44 -08:00
Davide Caratti 4eef8b1f36 net/sched: fq_pie: initialize timer earlier in fq_pie_init()
with the following tdc testcase:

 83be: (qdisc, fq_pie) Create FQ-PIE with invalid number of flows

as fq_pie_init() fails, fq_pie_destroy() is called to clean up. Since the
timer is not yet initialized, it's possible to observe a splat like this:

  INFO: trying to register non-static key.
  the code is fine but needs lockdep annotation.
  turning off the locking correctness validator.
  CPU: 0 PID: 975 Comm: tc Not tainted 5.10.0-rc4+ #298
  Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
  Call Trace:
   dump_stack+0x99/0xcb
   register_lock_class+0x12dd/0x1750
   __lock_acquire+0xfe/0x3970
   lock_acquire+0x1c8/0x7f0
   del_timer_sync+0x49/0xd0
   fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
   qdisc_create+0x916/0x1160
   tc_modify_qdisc+0x3c4/0x1630
   rtnetlink_rcv_msg+0x346/0x8e0
   netlink_unicast+0x439/0x630
   netlink_sendmsg+0x719/0xbf0
   sock_sendmsg+0xe2/0x110
   ____sys_sendmsg+0x5ba/0x890
   ___sys_sendmsg+0xe9/0x160
   __sys_sendmsg+0xd3/0x170
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [...]
  ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
  WARNING: CPU: 0 PID: 975 at lib/debugobjects.c:508 debug_print_object+0x162/0x210
  [...]
  Call Trace:
   debug_object_assert_init+0x268/0x380
   try_to_del_timer_sync+0x6a/0x100
   del_timer_sync+0x9e/0xd0
   fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
   qdisc_create+0x916/0x1160
   tc_modify_qdisc+0x3c4/0x1630
   rtnetlink_rcv_msg+0x346/0x8e0
   netlink_rcv_skb+0x120/0x380
   netlink_unicast+0x439/0x630
   netlink_sendmsg+0x719/0xbf0
   sock_sendmsg+0xe2/0x110
   ____sys_sendmsg+0x5ba/0x890
   ___sys_sendmsg+0xe9/0x160
   __sys_sendmsg+0xd3/0x170
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

fix it moving timer_setup() before any failure, like it was done on 'red'
with former commit 608b4adab1 ("net_sched: initialize timer earlier in
red_init()").

Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/2e78e01c504c633ebdff18d041833cf2e079a3a4.1607020450.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 14:15:01 -08:00
Jakub Kicinski a1cdfbe8f0 Three small fixes:
* initialize some data to avoid using stack garbage
  * fix 6 GHz channel selection in mac80211
  * correctly restart monitor mode interfaces in mac80211
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAl/KKSQACgkQB8qZga/f
 l8QtAg/+PvDEET4W0baM3cZKHhxhmPebPUVb4FMMz3U3fqjvek5geUQvu9DhdLyr
 l1/Mf4lxhvhAvPVjm0fAYiTH9DYEEc84nX/0KUOWcv/HHpAyqrb8Swm/yPbSilC4
 b4UyePaVGQzZcMF/JmKKhcVrI6BPpCfefnKNvthe2XIPrPfVvy5Hsu7hEmwGZSmL
 s0rCabj9wGYVqu4bPYL2KCbPM5MgRd/TegMoo41gR0DZPPcE6TKTCFvPgo1eK9bV
 8NePxISBeYDzV2lj7yQNf8YE7Oidiq+3gWCMoo9fpHcN0pgK5H4GT0XP69ZK4p4l
 o9+lO/0ly78g63X7EZuleKil6FXM43iLFi8SsywfGXkwaDcEeDOMA68Pv0G1iR8s
 s2dX+jodF5pg7TCdZiXouWpRxzPiOZqxEX1RHPMR1ZXGocVu0zFtKTM0ZI8cnaww
 KpKZ71M347b8BLzhXchAH3r9q2T6ogbTm1+/2Z+o/6wOTYzclH/9Fv8YqMBeqHtM
 CrYjlh7UsAybpqWqJGr8cPxnzR+MtkaNuhgXy7rEkjvzHspC9mm2wizVsVAWNll2
 Ba4YrQw1tIJdSnapW8hkjwecFvJmEp8BND8cl8qYHlxXqELHDroaaHJFb7XiQUvt
 EtGT/ezCYqTWPY8SRfeT+dhXyehPgYvY4UGB0o0dnIYi6aqocB8=
 =7wn+
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-net-2020-12-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Three small fixes:
 * initialize some data to avoid using stack garbage
 * fix 6 GHz channel selection in mac80211
 * correctly restart monitor mode interfaces in mac80211

* tag 'mac80211-for-net-2020-12-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
  mac80211: set SDATA_STATE_RUNNING for monitor interfaces
  cfg80211: initialize rekey_data
  mac80211: fix return value of ieee80211_chandef_he_6ghz_oper
====================

Link: https://lore.kernel.org/r/20201204122017.118099-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 11:26:28 -08:00
Borwankar, Antara bdeca45a0c mac80211: set SDATA_STATE_RUNNING for monitor interfaces
During restarrt, mac80211 is supposed to reconfigure the driver.
When there's a monitor interface, the interface is added and the
channel context for it was created, but not assigned to it as it
was not considered running during the restart.

Fix this by setting SDATA_STATE_RUNNING while adding monitor
interfaces.

Signed-off-by: Borwankar, Antara <antara.borwankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.e1df99693a4c.I494579f28018c2d0b9d4083a664cf872c28405ae@changeid
[reword commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-04 12:45:25 +01:00
Sara Sharon f495acd885 cfg80211: initialize rekey_data
In case we have old supplicant, the akm field is uninitialized.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.930f0ab7ebee.Ic546e384efab3f4a89f318eafddc3eb7d556aecb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-04 12:35:58 +01:00
Wen Gong 8fca2b8706 mac80211: fix return value of ieee80211_chandef_he_6ghz_oper
ieee80211_chandef_he_6ghz_oper() needs to return true if it
determined a value 6 GHz chandef, fix that.

Fixes: 1d00ce807e ("mac80211: support S1G association")
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/1606121152-3452-1-git-send-email-wgong@codeaurora.org
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-04 12:35:58 +01:00
Linus Torvalds bbe2ba04c5 Networking fixes for 5.10-rc7, including fixes from bpf, netfilter,
wireless drivers, wireless mesh and can.
 
 Current release - regressions:
 
  - mt76: usb: fix crash on device removal
 
 Current release - always broken:
 
  - xsk: Fix umem cleanup from wrong context in socket destruct
 
 Previous release - regressions:
 
  - net: ip6_gre: set dev->hard_header_len when using header_ops
 
  - ipv4: Fix TOS mask in inet_rtm_getroute()
 
  - net, xsk: Avoid taking multiple skbuff references
 
 Previous release - always broken:
 
  - net/x25: prevent a couple of overflows
 
  - netfilter: ipset: prevent uninit-value in hash_ip6_add
 
  - geneve: pull IP header before ECN decapsulation
 
  - mpls: ensure LSE is pullable in TC and openvswitch paths
 
  - vxlan: respect needed_headroom of lower device
 
  - batman-adv: Consider fragmentation for needed packet headroom
 
  - can: drivers: don't count arbitration loss as an error
 
  - netfilter: bridge: reset skb->pkt_type after POST_ROUTING
               traversal
 
  - inet_ecn: Fix endianness of checksum update when setting ECT(1)
 
  - ibmvnic: fix various corner cases around reset handling
 
  - net/mlx5: fix rejecting unsupported Connect-X6DX SW steering
 
  - net/mlx5: Enforce HW TX csum offload with kTLS
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl/JS3sACgkQMUZtbf5S
 Irs7QA/9ELcJ2gklCJwrlVGXNhUddGpZH9OX2K3WL/c1ZzgARt3e0jkO88lY25Tk
 tXTRTelx7xzHUNBmXJhBx1Wj8H+S/5A1FLMdl3ZqkeFrvrYIUxSvnbRoFB0CALrV
 OXYtsd7P86BHrT5hQNGte9V5JV5LpYAUvH6+QSD7mWOzul0gtIcKEJ7claypYuRT
 hm+wt2ENSRU3bNNwOVG8SoA1CEFFXePfyqEr6cBTs+1/OyzYV4880LvJXVdwwOx0
 DogwsPt5L53Y2uoOaFKVRr2SUVzOi9Y79FAX3rfqIqoi89xcbK6ihHsb4ldGxkAy
 ILZEU/Y4lB6YsdtJjGGrB7cPhiWOl0AzPYgmOczWHw/5LMzgWKEt6H/JvkjGSlQJ
 pXixi6/cmsQOS6o5ydQT9Iu5qLMOOduv2mmQmOPJHkq8/SgiYTuTUiJkXgL8pPv+
 Mq4Qm4JL+6aB2WL0NNzlqjVnIbFQmmGdrYGWdQnSeTN6X4T/uFQIz4fSQlQmFils
 qw1MBLZfhgjc4npfC0j5LdcABhC0BwEGelTJBKnc6+MbZlDTv2NdzP7wldzpjalR
 /a0/hLHsDMCkft92BQ3jp0C1LSikSYAhBPRJLSQiQbxzBv5JnDr6S5WpBTtBoDKT
 LdEqlS+mo0GwRK3pm2vSHQ4iVJY9v0PV0SbeJXH/SlJGYieUqJc=
 =HskU
 -----END PGP SIGNATURE-----

Merge tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc7, including fixes from bpf, netfilter,
  wireless drivers, wireless mesh and can.

  Current release - regressions:

   - mt76: usb: fix crash on device removal

  Current release - always broken:

   - xsk: Fix umem cleanup from wrong context in socket destruct

  Previous release - regressions:

   - net: ip6_gre: set dev->hard_header_len when using header_ops

   - ipv4: Fix TOS mask in inet_rtm_getroute()

   - net, xsk: Avoid taking multiple skbuff references

  Previous release - always broken:

   - net/x25: prevent a couple of overflows

   - netfilter: ipset: prevent uninit-value in hash_ip6_add

   - geneve: pull IP header before ECN decapsulation

   - mpls: ensure LSE is pullable in TC and openvswitch paths

   - vxlan: respect needed_headroom of lower device

   - batman-adv: Consider fragmentation for needed packet headroom

   - can: drivers: don't count arbitration loss as an error

   - netfilter: bridge: reset skb->pkt_type after POST_ROUTING traversal

   - inet_ecn: Fix endianness of checksum update when setting ECT(1)

   - ibmvnic: fix various corner cases around reset handling

   - net/mlx5: fix rejecting unsupported Connect-X6DX SW steering

   - net/mlx5: Enforce HW TX csum offload with kTLS"

* tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering
  net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS
  net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled
  net/mlx5: Fix wrong address reclaim when command interface is down
  net/sched: act_mpls: ensure LSE is pullable before reading it
  net: openvswitch: ensure LSE is pullable before reading it
  net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl
  net: mvpp2: Fix error return code in mvpp2_open()
  chelsio/chtls: fix a double free in chtls_setkey()
  rtw88: debug: Fix uninitialized memory in debugfs code
  vxlan: fix error return code in __vxlan_dev_create()
  net: pasemi: fix error return code in pasemi_mac_open()
  cxgb3: fix error return code in t3_sge_alloc_qset()
  net/x25: prevent a couple of overflows
  dpaa_eth: copy timestamp fields to new skb in A-050385 workaround
  net: ip6_gre: set dev->hard_header_len when using header_ops
  mt76: usb: fix crash on device removal
  iwlwifi: pcie: add some missing entries for AX210
  iwlwifi: pcie: invert values of NO_160 device config entries
  iwlwifi: pcie: add one missing entry for AX210
  ...
2020-12-03 13:10:11 -08:00
Linus Torvalds fee5be1852 - fix lockdep irq state tracing
- fix logical vs physical CPU address confusion in PCI code
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAl/JNlgACgkQIg7DeRsp
 bsKdgA//TQrq8oN33N/kCGcqLqXito9c5hLVUDapGYvBF9eJmjDoWPYJln6y8yRa
 PUmzH2ONKyJNXbbPrj8/YP2qYwUZ/gL5ehussdxNU57ZQ7+uX20GrXjTsjIJFO/T
 X2EXhk79iBfO0rbayZvxEJZVRrEXiDGrRWouZwUDiR08BLrFCugTP7u+kc4W4BJu
 nxPkPi8TrGAD6hMVUv8In2w5rnHzjnHyrCRZPvCFSf2d3zxn+vlb0ZT5sgmqoZKb
 xqfJhvJPZNcl4D58diHGWNWOZDw2su9CQG9OcZrv6PSexzDCPU4+GdZpr0Jc5HQ5
 TE3u3CFpQEORNCFjPP4ailptqpIN1/7Y6ZA5xOwgdAeU0kFvpRhkd3Nftpl1gqkl
 VI4eEAIJ3+2ob2WKWlX6ecIS82YyH03avskWyfj6MoAtRkICJKVWYdTEHGZwswcY
 JYmL8tg0nq/UuAepdGReh61LjSatQDY9Z4DSU0U9Y02231mpSxZ8sYuv/YlMQp49
 pJX3G6Yi4G3Mz+w9mt6Ly5Iq7mzwRLoHgzkPQvbhnnXgCOnWI6PyzqWhlqztZ/At
 /3qdxn8NpD2POJbdSSWPlqCVXLQHEtQN1QRi6f/awsJ5vT8bTqTEvQj8y79IeBJO
 5Wx2wbXAuvzCNEoQOKRFJV1Ddtono+idAMVRTwTUv1jUfxE2MIE=
 =NaIp
 -----END PGP SIGNATURE-----

Merge tag 's390-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:
 "One commit is fixing lockdep irq state tracing which broke with -rc6.

  The other one fixes logical vs physical CPU address mixup in our PCI
  code.

  Summary:

   - fix lockdep irq state tracing

   - fix logical vs physical CPU address confusion in PCI code"

* tag 's390-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix irq state tracing
  s390/pci: fix CPU address in MSI for directed IRQ
2020-12-03 11:58:26 -08:00
Linus Torvalds c82a505c00 Restore splice functionality for 9p
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE/IPbcYBuWt0zoYhOq06b7GqY5nAFAl/IvNUACgkQq06b7GqY
 5nBRAA//UQJ3ioEvTlIpdHR6wKeH9XV2bucqjbAO2PRU0r8qEBC6wRr8IDBv4J4D
 xUyQ+teWjBLoKekdhoXsz3xXWtwqPNchVXClFOtjsUqYn2F71pUYNhRYJL9Xy+yy
 pumUxG3vJpJ4QTWkuSeB7/Ha561waWHILIeo1knT6z0Q49jmYI1J9Bl84q7RiC/7
 wH+bgyE0RSORoIfkfapIvgwdjamUsnzMVhSVKNOol3gwkjFJGfOtk16VVSKq/RlK
 5uOnjmWiVAkfPdDOA93mu6KE3FA4FB/sQaESwBR2fawsd646WooG5hn8fhMa0kHP
 y6AZo6fdYglcOD/OE1S0GpcSOocAdglfcU51kfxX8Z7BwfAbl7WCPCS2Rl75PYFf
 PhTzidD+vQsroGEaCF2+w90yIZBGgLz0Lh6az3zmaNGo7lcrRyP6GzQMmKILp2O1
 MuPWNFRzt5ZAmyq7roVVclMzXnXEQM2v5YS3ib+wuUpQHWwGAUzdV6u9uFsp6vXx
 QSnsD4Y9wwMSI03QkkzW7TaH1laImRt820emivo3rOoWk1f7sCG5r3WlNPRIh1cN
 9n6oCCOvFgXpTmiE0btqSKeMMxCqjtPHGZ5dQTTnftf0euNXGIZDPMSL45ANDXh+
 5Ezhjggqa91ohUSBRJgwc9MGsZy0GxOneDWPMpXAIDe9OlRkSC0=
 =zCUA
 -----END PGP SIGNATURE-----

Merge tag '9p-for-5.10-rc7' of git://github.com/martinetd/linux

Pull 9p fixes from Dominique Martinet:
 "Restore splice functionality for 9p"

* tag '9p-for-5.10-rc7' of git://github.com/martinetd/linux:
  fs: 9p: add generic splice_write file operation
  fs: 9p: add generic splice_read file operations
2020-12-03 11:47:13 -08:00
Jakub Kicinski 6f076ce6ab Merge branch 'mlx5-fixes-2020-12-01'
Saeed Mahameed says:

====================
mlx5 fixes 2020-12-01

This series introduces some fixes to mlx5 driver.
====================

Link: https://lore.kernel.org/r/20201203043946.235385-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 11:18:38 -08:00
Yevgeny Kliteynik d421e466c2 net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering
STEs format for Connect-X5 and Connect-X6DX different. Currently, on
Connext-X6DX the SW steering would break at some point when building STEs
w/o giving a proper error message. Fix this by checking the STE format of
the current device when initializing domain: add mlx5_ifc definitions for
Connect-X6DX SW steering, read FW capability to get the current format
version, and check this version when domain is being created.

Fixes: 26d688e33f ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 11:18:36 -08:00
Tariq Toukan b336e6b25e net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS
Checksum calculation cannot be done in SW for TX kTLS HW offloaded
packets.
Offload it to the device, disregard the declared state of the TX
csum offload feature.

Fixes: d2ead1f360 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 11:18:35 -08:00
Randy Dunlap 8a78a44010 net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled
Fix build when CONFIG_IPV6 is not enabled by making a function
be built conditionally.

Fixes these build errors and warnings:

../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c: In function 'accel_fs_tcp_set_ipv6_flow':
../include/net/sock.h:380:34: error: 'struct sock_common' has no member named 'skc_v6_daddr'; did you mean 'skc_daddr'?
  380 | #define sk_v6_daddr  __sk_common.skc_v6_daddr
      |                                  ^~~~~~~~~~~~
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:55:14: note: in expansion of macro 'sk_v6_daddr'
   55 |         &sk->sk_v6_daddr, 16);
      |              ^~~~~~~~~~~
At top level:
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:47:13: warning: 'accel_fs_tcp_set_ipv6_flow' defined but not used [-Wunused-function]
   47 | static void accel_fs_tcp_set_ipv6_flow(struct mlx5_flow_spec *spec, struct sock *sk)

Fixes: 5229a96e59 ("net/mlx5e: Accel, Expose flow steering API for rules add/del")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 11:18:35 -08:00
Eran Ben Elisha 1d2bb5ad89 net/mlx5: Fix wrong address reclaim when command interface is down
When command interface is down, driver to reclaim all 4K page chucks that
were hold by the Firmeware. Fix a bug for 64K page size systems, where
driver repeatedly released only the first chunk of the page.

Define helper function to fill 4K chunks for a given Firmware pages.
Iterate over all unreleased Firmware pages and call the hepler per each.

Fixes: 5adff6a088 ("net/mlx5: Fix incorrect page count when in internal error")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 11:18:35 -08:00
Davide Caratti 9608fa6530 net/sched: act_mpls: ensure LSE is pullable before reading it
when 'act_mpls' is used to mangle the LSE, the current value is read from
the packet dereferencing 4 bytes at mpls_hdr(): ensure that the label is
contained in the skb "linear" area.

Found by code inspection.

v2:
 - use MPLS_HLEN instead of sizeof(new_lse), thanks to Jakub Kicinski

Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/3243506cba43d14858f3bd21ee0994160e44d64a.1606987058.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 11:13:37 -08:00
Davide Caratti 43c13605ba net: openvswitch: ensure LSE is pullable before reading it
when openvswitch is configured to mangle the LSE, the current value is
read from the packet dereferencing 4 bytes at mpls_hdr(): ensure that
the label is contained in the skb "linear" area.

Found by code inspection.

Fixes: d27cf5c59a ("net: core: add MPLS update core helper and use in OvS")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/aa099f245d93218b84b5c056b67b6058ccf81a66.1606987185.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 11:13:29 -08:00
Davide Caratti 13de4ed9e3 net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl
skb_mpls_dec_ttl() reads the LSE without ensuring that it is contained in
the skb "linear" area. Fix this calling pskb_may_pull() before reading the
current ttl.

Found by code inspection.

Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/53659f28be8bc336c113b5254dc637cc76bbae91.1606987074.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 11:13:21 -08:00
Jakub Kicinski 6392b5b28e wireless-drivers fixes for v5.10
Second, and most likely final, set of fixes for v5.10. Small fixes and
 PCI id addtions.
 
 iwlwifi
 
 * PCI id additions
 
 mt76
 
 * fix a kernel crash during device removal
 
 rtw88
 
 * fix uninitialized memory in debugfs code
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJfyS7IAAoJEG4XJFUm622baIIH/jQl+ogi9RoL+96Fdo4eqltw
 CGK3QP6GUlutKA6U9a7IKw9TTAu9nHPpBK5rLaFZCOmNsGprbyQ822UZt16s77XF
 TBN/gTp/aeogRVfV07D5owNmjCO61WG2IvUOuP5T/td/0xsYxPH+0ESBNXXUy0bC
 oIoQzYba1/uw0yVUyZezvZb+gPKIxWWZ8V9tuegcWrr0NsVsNFPFMGkTFt7BGqPm
 LNCVMJy2v5XA25+TMTKgsrCbMeUl7ffADKFvqKm3i4kv57bYX67siDraNEWNWkhr
 43MAG0p1p9tuxzubjv3ncOVvLU62Lvm03TG2r+NonSovXjueVG/wU3E4wADaLBI=
 =JY9B
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.10

Second, and most likely final, set of fixes for v5.10. Small fixes and
PCI id addtions.

iwlwifi
 * PCI id additions
mt76
 * fix a kernel crash during device removal
rtw88
 * fix uninitialized memory in debugfs code

* tag 'wireless-drivers-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
  rtw88: debug: Fix uninitialized memory in debugfs code
  mt76: usb: fix crash on device removal
  iwlwifi: pcie: add some missing entries for AX210
  iwlwifi: pcie: invert values of NO_160 device config entries
  iwlwifi: pcie: add one missing entry for AX210
  iwlwifi: update MAINTAINERS entry
====================

Link: https://lore.kernel.org/r/20201203183408.EE88AC43461@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 10:59:29 -08:00
Wang Hai 82a10dc7f0 net: mvpp2: Fix error return code in mvpp2_open()
Fix to return negative error code -ENOENT from invalid configuration
error handling case instead of 0, as done elsewhere in this function.

Fixes: 4bb0432628 ("net: mvpp2: phylink support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201203141806.37966-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 10:57:24 -08:00
Dan Carpenter 391119fb5c chelsio/chtls: fix a double free in chtls_setkey()
The "skb" is freed by the transmit code in cxgb4_ofld_send() and we
shouldn't use it again.  But in the current code, if we hit an error
later on in the function then the clean up code will call kfree_skb(skb)
and so it causes a double free.

Set the "skb" to NULL and that makes the kfree_skb() a no-op.

Fixes: d25f2f71f6 ("crypto: chtls - Program the TLS session Key")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X8ilb6PtBRLWiSHp@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 10:53:35 -08:00
Eric Sandeen 72d1249e2f uapi: fix statx attribute value overlap for DAX & MOUNT_ROOT
STATX_ATTR_MOUNT_ROOT and STATX_ATTR_DAX got merged with the same value,
so one of them needs fixing.  Move STATX_ATTR_DAX.

While we're in here, clarify the value-matching scheme for some of the
attributes, and explain why the value for DAX does not match.

Fixes: 80340fe360 ("statx: add mount_root")
Fixes: 712b2698e4 ("fs/stat: Define DAX statx attribute")
Link: https://lore.kernel.org/linux-fsdevel/7027520f-7c79-087e-1d00-743bdefa1a1e@redhat.com/
Link: https://lore.kernel.org/lkml/20201202214629.1563760-1-ira.weiny@intel.com/
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: <stable@vger.kernel.org> # 5.8
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-03 10:03:14 -08:00