Граф коммитов

39 Коммитов

Автор SHA1 Сообщение Дата
Jakub Kicinski ff1f7c17fb netdevsim: add pause frame stats
Add minimal ethtool interface for testing ethtool pause stats.

v2: add missing static on nsim_ethtool_ops

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15 13:26:28 -07:00
David S. Miller a57066b1a0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
The UDP reuseport conflict was a little bit tricky.

The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.

At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.

This requires moving the reuseport_has_conns() logic into the callers.

While we are here, get rid of inline directives as they do not belong
in foo.c files.

The other changes were cases of more straightforward overlapping
modifications.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25 17:49:04 -07:00
Taehee Yoo 2c9d8e01f0 netdevsim: fix unbalaced locking in nsim_create()
In the nsim_create(), rtnl_lock() is called before nsim_bpf_init().
If nsim_bpf_init() is failed, rtnl_unlock() should be called,
but it isn't called.
So, unbalanced locking would occur.

Fixes: e05b2d141f ("netdevsim: move netdev creation/destruction to dev probe")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21 16:00:43 -07:00
Jakub Kicinski 424be63ad8 netdevsim: add UDP tunnel port offload support
Add UDP tunnel port handlers to our fake driver so we can test
the core infra.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10 13:54:00 -07:00
Jiri Pirko 90d299138d netdevsim: register port netdevices into net of device
Register newly created port netdevice into net namespace
that the parent device belongs to.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04 11:10:56 -07:00
Jiri Pirko a5facc4cac netdevsim: change fib accounting and limitations to be per-device
Currently, the accounting is done per-namespace. However, devlink
instance is always in init_net namespace for now, so only the accounting
related to init_net is used. Limitations set using devlink resources
are only considered for init_net. nsim_devlink_net() always
returns init_net always.

Make the accounting per-device. This brings no functional change.
Per-device accounting has the same values as per-net.
For a single netdevsim instance, the behaviour is exactly the same
as before. When multiple netdevsim instances are created, each
can have different limits.

This is in prepare to implement proper devlink netns support. After
that, the devlink instance which would exist in particular netns would
account and limit that netns.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04 11:10:55 -07:00
David Ahern 59c84b9fcf netdevsim: Restore per-network namespace accounting for fib entries
Prior to the commit in the fixes tag, the resource controller in netdevsim
tracked fib entries and rules per network namespace. Restore that behavior.

Fixes: 5fc494225c ("netdevsim: create devlink instance per netdevsim instance")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11 20:59:19 -07:00
Pablo Neira Ayuso 955bcb6ea0 drivers: net: use flow block API
This patch updates flow_block_cb_setup_simple() to use the flow block API.
Several drivers are also adjusted to use it.

This patch introduces the per-driver list of flow blocks to account for
blocks that are already in use.

Remove tc_block_offload alias.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 14:38:50 -07:00
Pablo Neira Ayuso 4e95bc268b net: flow_offload: add flow_block_cb_setup_simple()
Most drivers do the same thing to set up the flow block callbacks, this
patch adds a helper function to do this.

This preparation patch reduces the number of changes to adapt the
existing drivers to use the flow block callback API.

This new helper function takes a flow block list per-driver, which is
set to NULL until this driver list is used.

This patch also introduces the flow_block_command and
flow_block_binder_type enumerations, which are renamed to use
FLOW_BLOCK_* in follow up patches.

There are three definitions (aliases) in order to reduce the number of
updates in this patch, which go away once drivers are fully adapted to
use this flow block API.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 14:38:50 -07:00
Jiri Pirko a62fdbbe94 netdevsim: implement ndo_get_devlink_port
Implement ndo_get_devlink_port and allow switch_id and port_name to be
handled by devlink.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:03 -04:00
Jiri Pirko e05b2d141f netdevsim: move netdev creation/destruction to dev probe
Remove the existing way to create netdevsim over rtnetlink and move the
netdev creation/destruction to dev probe, so for every probed port,
a netdevsim-netdev instance is created.

Adjust selftests to work with new interface.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:03 -04:00
Jiri Pirko 8320d14591 netdevsim: implement dev probe/remove skeleton with port initialization
Implement netdevsim bus probing of netdevsim devices. For every probed
device create a devlink instance. According to the user-passed value,
create a number of ports represented by devlink port instances.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko ab1d0cc004 netdevsim: change debugfs tree topology
With the model where dev is represented by devlink and ports are
represented by devlink ports, make debugfs file names independent
on netdev names. Change the topology to the one illustrated
by the following example:

$ ls /sys/kernel/debug/netdevsim/
netdevsim1
$ ls /sys/kernel/debug/netdevsim/netdevsim1/
bpf_bind_accept  bpf_bind_verifier_delay  bpf_bound_progs  ports
$ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/
0  1
$ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/
bpf_map_accept  bpf_offloaded_id  bpf_tc_accept  bpf_tc_non_bound_accept  bpf_xdpdrv_accept  bpf_xdpoffload_accept  dev  ipsec
$ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l
lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko 514cf64cc5 netdevsim: generate random switch id instead of using dev id
Current implementation of parent_id/switch_id does not follow the
original idea of being unique. The values are "0", "1", etc. Instead of
that, generate 32 random bytes.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko d514f41e79 netdevsim: merge sdev into dev
As previously introduce dev which is mapped 1:1 to a bus device covers
the purpose of the original shared device, merge the sdev code into dev.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko a60f9e48b7 netdevsim: rename dev_init/exit() functions and make them independent on ns
These functions are going to be called from bus probe/release(),
therefore make them independent on ns struct and rename accordingly.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko f9d9db47d3 netdevsim: add bus attributes to add new and delete devices
Add a way to add new netdevsim device on netdevsim bus and also to
delete existing netdevsim device from the bus. Track the bus devices
in using a list.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko 40e4fe4ce1 netdevsim: move device registration and related code to bus.c
Move netdevsim device registration into bus.c and alongside with that
the related sysfs attributes. Introduce new struct nsim_bus_dev to
represent a netdevsim device on netdevsim bus.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko 925f5afedb netdevsim: put netdevsim bus code into separate file
As the code related to netdevsim bus is going to get bigger, move the
existing code to a separate file.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko 8fb4bc6fd5 netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items
The existing devlink.c code is going to be extended to represent asic
device on a bus. As this is about more than just devlink,
rename the file. Do appropriate prefix renaming alongside with that.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko 5fc494225c netdevsim: create devlink instance per netdevsim instance
Currently there is one devlink instance created per network namespace.
That is quite odd considering the fact that devlink instance should
represent an ASIC. The following patches are going to move the devlink
instance even more down to a bus device, but until then, have one
devlink instance per netdevsim instance. Struct nsim_devlink is
introduced to hold fib setting.

The changes in the fib code are only related to holding the
configuration per devlink instance instead of network namespace.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko 1daf36c0db netdevsim: move device registration on bus to be done earlier in init
As a dependency of the subsequent patch, mode device registration to be
done earlier, directly in nsim_newlink().

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 01:52:02 -04:00
Jiri Pirko af9095f00d netdevsim: move shared dev creation and destruction into separate file
To make code easier to read, move shared dev bits into a separate file.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:49:54 -07:00
Jiri Pirko c3d9a435d9 netdevsim: let net core to free netdevsim netdev
No need to free it ourselves, just set the "needs_free_netdev" flag
and leave the work to net core.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 11:16:59 -07:00
Jiri Pirko 7d1df2c978 netdevsim: remove nsim_dellink() implementation
Remove nsim_dellink() implementation. The rtnetlink code sets the
dellink op to unregister_netdevice_queue(), so this is not needed.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 11:16:59 -07:00
Florian Fainelli e58df56c85 netdevsim: Implement ndo_get_port_parent_id()
netdevsim only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a
great candidate to be converted to use the ndo_get_port_parent_id() NDO
instead of implementing switchdev_port_attr_get().

Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06 14:17:03 -08:00
Jakub Kicinski f61b6db378 netdevsim: make debug dirs' dentries static
The root directories of netdevsim should only be used by the core
to create per-device subdirectories, so limit their visibility to
the core file.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-26 21:28:54 -07:00
Jakub Kicinski eeeaaf185e netdevsim: add shared netdevsim devices
Factor out sharable netdevsim sub-object and use IFLA_LINK to link
netdevsims together at creation time.  Sharable object will have
its own DebugFS directory.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18 15:10:33 +02:00
Jakub Kicinski 5f07655b80 netdevsim: add switch_id attribute
Grouping netdevsim devices into "ASICs" will soon be supported.
Add switch_id attribute to all netdevsims.  For now each netdevsim
will have its switch_id matching the device id.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18 15:10:33 +02:00
Jakub Kicinski 799e173d71 netdevsim: add support for simultaneous driver and hw XDP
Allow netdevsim to accept driver and offload attachment of XDP
BPF programs at the same time.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-13 20:26:35 +02:00
Shannon Nelson 7699353da8 netdevsim: add ipsec offload testing
Implement the IPsec/XFRM offload API for testing.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28 16:10:08 +09:00
John Hurley 60513bd82c net: sched: pass extack pointer to block binds and cb registration
Pass the extact struct from a tc qdisc add to the block bind function and,
in turn, to the setup_tc ndo of binding device via the tc_block_offload
struct. Pass this back to any block callback registrations to allow
netlink logging of fails in the bind process.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26 23:21:32 +09:00
David Ahern ef81710258 netdevsim: Change nsim_devlink_setup to return error to caller
Change nsim_devlink_setup to return any error back to the caller and
update nsim_init to handle it.

Requested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31 22:22:10 -04:00
David Ahern 37923ed6b8 netdevsim: Add simple FIB resource controller via devlink
Add devlink support to netdevsim and use it to implement a simple,
profile based resource controller. Only one controller is needed
per namespace, so the first netdevsim netdevice in a namespace
registers with devlink. If that device is deleted, the resource
settings are deleted.

The resource controller allows a user to limit the number of IPv4 and
IPv6 FIB entries and FIB rules. The resource paths are:
    /IPv4
    /IPv4/fib
    /IPv4/fib-rules
    /IPv6
    /IPv6/fib
    /IPv6/fib-rules

The IPv4 and IPv6 top level resources are unlimited in size and can not
be changed. From there, the number of FIB entries and FIB rule entries
are unlimited by default. A user can specify a limit for the fib and
fib-rules resources:

    $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96
    $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16
    $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64
    $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16
    $ devlink dev reload netdevsim/netdevsim0

such that the number of rules or routes is limited (96 ipv4 routes in the
example above):
    $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done
    Error: netdevsim: Exceeded number of supported fib entries.

    $ devlink resource show netdevsim/netdevsim0
    netdevsim/netdevsim0:
      name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non
        resources:
          name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables
    ...

With this template in place for resource management, it is fairly trivial
to extend and shows one way to implement a simple counter based resource
controller typical of network profiles.

Currently, devlink only supports initial namespace. Code is in place to
adapt netdevsim to a per namespace controller once the network namespace
issues are resolved.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29 14:10:31 -04:00
Prashant Bhole 9ee1942cb3 netdevsim: correctly check return value of debugfs_create_dir
- Checking return value with IS_ERROR_OR_NULL
- Added error handling where it was not handled

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20 13:58:48 -05:00
Jakub Kicinski fd5ebbc75c netdevsim: declare struct device_type as static
struct device_type nsim_dev_type created for SR-IOV support
should be static.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20 12:51:10 -05:00
Jakub Kicinski 7957922056 netdevsim: add SR-IOV functionality
dummy driver was extended with VF-related netdev APIs for testing
SR-IOV-related software.  netdevsim did not exist back then.
Implement SR-IOV functionality in netdevsim.  Notable difference
is that since netdevsim has no module parameters, we will actually
create a device with sriov_numvfs attribute for each netdev.
The zero MAC address is accepted as some HW use it to mean any
address is allowed.  Link state is also now validated.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-03 00:27:58 +01:00
Jakub Kicinski 31d3ad8329 netdevsim: add bpf offload support
Add support for loading programs for netdevsim devices and
expose the related information via DebugFS.  Both offload
of XDP and cls_bpf programs is supported.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-03 00:27:57 +01:00
Jakub Kicinski 83c9e13aa3 netdevsim: add software driver for testing offloads
To be able to run selftests without any hardware required we
need a software model.  The model can also serve as an example
implementation for those implementing actual HW offloads.
The dummy driver have previously been extended to test SR-IOV,
but the general consensus seems to be against adding further
features to it.

Add a new driver for purposes of software modelling only.
eBPF and SR-IOV will be added here shortly, others are invited
to further extend the driver with their offload models.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-03 00:27:57 +01:00