Граф коммитов

211868 Коммитов

Автор SHA1 Сообщение Дата
Xiao Guangrong 3377078027 KVM: MMU: move access code parsing to FNAME(walk_addr) function
Move access code parsing from caller site to FNAME(walk_addr) function

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:14 +02:00
Xiao Guangrong 6903074c36 KVM: MMU: audit: check whether have unsync sps after root sync
After root synced, all unsync sps are synced, this patch add a check to make
sure it's no unsync sps in VCPU's page table

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:14 +02:00
Xiao Guangrong 38904e1287 KVM: MMU: audit: introduce audit_printk to cleanup audit code
Introduce audit_printk, and record audit point instead audit name

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:13 +02:00
Xiao Guangrong c42fffe3a3 KVM: MMU: audit: unregister audit tracepoints before module unloaded
fix:

Call Trace:
 [<ffffffffa01e46ba>] ? kvm_mmu_pte_write+0x229/0x911 [kvm]
 [<ffffffffa01c6ba9>] ? gfn_to_memslot+0x39/0xa0 [kvm]
 [<ffffffffa01c6c26>] ? mark_page_dirty+0x16/0x2e [kvm]
 [<ffffffffa01c6d6f>] ? kvm_write_guest_page+0x67/0x7f [kvm]
 [<ffffffff81066fbd>] ? local_clock+0x2a/0x3b
 [<ffffffffa01d52ce>] emulator_write_phys+0x46/0x54 [kvm]
 ......
Code:  Bad RIP value.
RIP  [<ffffffffa0172056>] 0xffffffffa0172056
 RSP <ffff880134f69a70>
CR2: ffffffffa0172056

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:13 +02:00
Xiao Guangrong 98224bf1d1 KVM: MMU: audit: fix vcpu's spte walking
After nested nested paging, it may using long mode to shadow 32/PAE paging
guest, so this patch fix it

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:12 +02:00
Xiao Guangrong 33f91edb92 KVM: MMU: set access bit for direct mapping
Set access bit while setup up direct page table if it's nonpaing or npt enabled,
it's good for CPU's speculate access

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:11 +02:00
Xiao Guangrong 20bd40dc64 KVM: MMU: cleanup for error mask set while walk guest page table
Small cleanup for set page fault error code

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:10 +02:00
Xiao Guangrong 6292757fb0 KVM: MMU: update 'root_hpa' out of loop in PAE shadow path
The value of 'vcpu->arch.mmu.pae_root' is not modified, so we can update
'root_hpa' out of the loop.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:09 +02:00
Sheng Yang 7129eecac1 KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn()
Eliminate:
arch/x86/kvm/emulate.c:801: warning: ‘sv’ may be used uninitialized in this
function

on gcc 4.1.2

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:09 +02:00
Jan Kiszka 50933623e5 KVM: x86: Fix constant type in kvm_get_time_scale
Older gcc versions complain about the improper type (for x86-32), 4.5
seems to fix this silently. However, we should better use the right type
initially.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:08 +02:00
Jan Kiszka 07d6f555d5 KVM: VMX: Add AX to list of registers clobbered by guest switch
By chance this caused no harm so far. We overwrite AX during switch
to/from guest context, so we must declare this.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:07 +02:00
Arjan Koers 19b6a85b78 KVM guest: Move a printk that's using the clock before it's ready
Fix a hang during SMP kernel boot on KVM that showed up
after commit 489fb490db
(2.6.35) and 59aab52215
(2.6.34.1). The problem only occurs when
CONFIG_PRINTK_TIME is set.

KVM-Stable-Tag.
Signed-off-by: Arjan Koers <0h61vkll2ly8@xutrox.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:53:06 +02:00
Zachary Amsden c285545f81 KVM: x86: TSC catchup mode
Negate the effects of AN TYM spell while kvm thread is preempted by tracking
conversion factor to the highest TSC rate and catching the TSC up when it has
fallen behind the kernel view of time.  Note that once triggered, we don't
turn off catchup mode.

A slightly more clever version of this is possible, which only does catchup
when TSC rate drops, and which specifically targets only CPUs with broken
TSC, but since these all are considered unstable_tsc(), this patch covers
all necessary cases.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:05 +02:00
Zachary Amsden 34c238a1d1 KVM: x86: Rename timer function
This just changes some names to better reflect the usage they
will be given.  Separated out to keep confusion to a minimum.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:05 +02:00
Zachary Amsden 5f4e3f8827 KVM: x86: Make math work for other scales
The math in kvm_get_time_scale relies on the fact that
NSEC_PER_SEC < 2^32.  To use the same function to compute
arbitrary time scales, we must extend the first reduction
step to shrink the base rate to a 32-bit value, and
possibly reduce the scaled rate into a 32-bit as well.

Note we must take care to avoid an arithmetic overflow
when scaling up the tps32 value (this could not happen
with the fixed scaled value of NSEC_PER_SEC, but can
happen with scaled rates above 2^31.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:04 +02:00
Avi Kivity 624d84cfe6 KVM: cpu_relax() during spin waiting for reboot
It doesn't really matter, but if we spin, we should spin in a more relaxed
manner.  This way, if something goes wrong at least it won't contribute to
global warming.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:03 +02:00
Avi Kivity 49e9d557f9 KVM: VMX: Respect interrupt window in big real mode
If an interrupt is pending, we need to stop emulation so we
can inject it.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:02 +02:00
Mohammed Gamal a92601bb70 KVM: VMX: Emulated real mode interrupt injection
Replace the inject-as-software-interrupt hack we currently have with
emulated injection.

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:01 +02:00
Mohammed Gamal 63995653ad KVM: Add kvm_inject_realmode_interrupt() wrapper
This adds a wrapper function kvm_inject_realmode_interrupt() around the
emulator function emulate_int_real() to allow real mode interrupt injection.

[avi: initialize operand and address sizes before emulating interrupts]
[avi: initialize rip for real mode interrupt injection]
[avi: clear interrupt pending flag after emulating interrupt injection]

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:01 +02:00
Mohammed Gamal 4ab8e02404 KVM: x86 emulator: Expose emulate_int_real()
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:00 +02:00
Hillf Danton cb16a7b387 KVM: MMU: fix counting of rmap entries in rmap_add()
It seems that rmap entries are under counted.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:52:59 +02:00
Xiao Guangrong a182d8737f KVM: document 'kvm.mmu_audit' parameter
Document this parameter into Documentation/kernel-parameters.txt

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:52:58 +02:00
Xiao Guangrong 8475f94abf KVM: fix the description of kvm-amd.nested in documentation
The default state of 'kvm-amd.nested' is enabled now, so fix the documentation

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:52:58 +02:00
Gleb Natapov a0a07cd2c5 KVM: SVM: do not generate "external interrupt exit" if other exit is pending
Nested SVM checks for external interrupt after injecting nested exception.
In case there is external interrupt pending the code generates "external
interrupt exit" and overwrites previous exit info. If previously injected
exception already generated exit it will be lost.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:52:56 +02:00
Avi Kivity f4f5105087 KVM: Convert PIC lock from raw spinlock to ordinary spinlock
The PIC code used to be called from preempt_disable() context, which
wasn't very good for PREEMPT_RT.  That is no longer the case, so move
back from raw_spinlock_t to spinlock_t.

Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:52:56 +02:00
Zachary Amsden 28e4639adf KVM: x86: Fix kvmclock bug
If preempted after kvmclock values are updated, but before hardware
virtualization is entered, the last tsc time as read by the guest is
never set.  It underflows the next time kvmclock is updated if there
has not yet been a successful entry / exit into hardware virt.

Fix this by simply setting last_tsc to the newly read tsc value so
that any computed nsec advance of kvmclock is nulled.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:52:56 +02:00
Joerg Roedel 0959ffacf3 KVM: MMU: Don't track nested fault info in error-code
This patch moves the detection whether a page-fault was
nested or not out of the error code and moves it into a
separate variable in the fault struct.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:55 +02:00
Avi Kivity 625831a3f4 KVM: VMX: Move fixup_rmode_irq() to avoid forward declaration
No code changes.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:54 +02:00
Avi Kivity b463a6f744 KVM: Non-atomic interrupt injection
Change the interrupt injection code to work from preemptible, interrupts
enabled context.  This works by adding a ->cancel_injection() operation
that undoes an injection in case we were not able to actually enter the guest
(this condition could never happen with atomic injection).

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:54 +02:00
Avi Kivity 83422e17c1 KVM: VMX: Parameterize vmx_complete_interrupts() for both exit and entry
Currently vmx_complete_interrupts() can decode event information from vmx
exit fields into the generic kvm event queues.  Make it able to decode
the information from the entry fields as well by parametrizing it.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:52 +02:00
Avi Kivity 537b37e267 KVM: VMX: Move real-mode interrupt injection fixup to vmx_complete_interrupts()
This allows reuse of vmx_complete_interrupts() for cancelling injections.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:51 +02:00
Avi Kivity 51aa01d13d KVM: VMX: Split up vmx_complete_interrupts()
vmx_complete_interrupts() does too much, split it up:
 - vmx_vcpu_run() gets the "cache important vmcs fields" part
 - a new vmx_complete_atomic_exit() gets the parts that must be done atomically
 - a new vmx_recover_nmi_blocking() does what its name says
 - vmx_complete_interrupts() retains the event injection recovery code

This helps in reducing the work done in atomic context.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:51 +02:00
Avi Kivity 3842d135ff KVM: Check for pending events before attempting injection
Instead of blindly attempting to inject an event before each guest entry,
check for a possible event first in vcpu->requests.  Sites that can trigger
event injection are modified to set KVM_REQ_EVENT:

- interrupt, nmi window opening
- ppr updates
- i8259 output changes
- local apic irr changes
- rflags updates
- gif flag set
- event set on exit

This improves non-injecting entry performance, and sets the stage for
non-atomic injection.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:50 +02:00
Avi Kivity b0bc3ee2b5 KVM: MMU: Fix regression with ept memory types merged into non-ept page tables
Commit "KVM: MMU: Make tdp_enabled a mmu-context parameter" made real-mode
set ->direct_map, and changed the code that merges in the memory type depend
on direct_map instead of tdp_enabled.  However, in this case what really
matters is tdp, not direct_map, since tdp changes the pte format regardless
of whether the mapping is direct or not.

As a result, real-mode shadow mappings got corrupted with ept memory types.
The result was a huge slowdown, likely due to the cache being disabled.

Change it back as the simplest fix for the regression (real fix is to move
all that to vmx code, and not use tdp_enabled as a synonym for ept).

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:49 +02:00
Avi Kivity c39cbd2a00 KVM: Document that KVM_GET_SUPPORTED_CPUID may return emulated values
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:48 +02:00
Joerg Roedel 4c62a2dc92 KVM: X86: Report SVM bit to userspace only when supported
This patch fixes a bug in KVM where it _always_ reports the
support of the SVM feature to userspace. But KVM only
supports SVM on AMD hardware and only when it is enabled in
the kernel module. This patch fixes the wrong reporting.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:48 +02:00
Joerg Roedel 3d4aeaad8b KVM: SVM: Report Nested Paging support to userspace
This patch implements the reporting of the nested paging
feature support to userspace.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:47 +02:00
Joerg Roedel 55c5e464fc KVM: SVM: Expect two more candiates for exit_int_info
This patch adds INTR and NMI intercepts to the list of
expected intercepts with an exit_int_info set. While this
can't happen on bare metal it is architectural legal and may
happen with KVMs SVM emulation.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:46 +02:00
Joerg Roedel 4b16184c1c KVM: SVM: Initialize Nested Nested MMU context on VMRUN
This patch adds code to initialize the Nested Nested Paging
MMU context when the L1 guest executes a VMRUN instruction
and has nested paging enabled in its VMCB.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:46 +02:00
Joerg Roedel 5bd2edc341 KVM: SVM: Implement MMU helper functions for Nested Nested Paging
This patch adds the helper functions which will be used in
the mmu context for handling nested nested page faults.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:45 +02:00
Joerg Roedel 2d48a985c7 KVM: MMU: Track NX state in struct kvm_mmu
With Nested Paging emulation the NX state between the two
MMU contexts may differ. To make sure that always the right
fault error code is recorded this patch moves the NX state
into struct kvm_mmu so that the code can distinguish between
L1 and L2 NX state.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:44 +02:00
Joerg Roedel 81407ca553 KVM: MMU: Allow long mode shadows for legacy page tables
Currently the KVM softmmu implementation can not shadow a 32
bit legacy or PAE page table with a long mode page table.
This is a required feature for nested paging emulation
because the nested page table must alway be in host format.
So this patch implements the missing pieces to allow long
mode page tables for page table types.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:43 +02:00
Joerg Roedel 651dd37a9c KVM: MMU: Refactor mmu_alloc_roots function
This patch factors out the direct-mapping paths of the
mmu_alloc_roots function into a seperate function. This
makes it a lot easier to avoid all the unnecessary checks
done in the shadow path which may break when running direct.
In fact, this patch already fixes a problem when running PAE
guests on a PAE shadow page table.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:42 +02:00
Joerg Roedel d41d1895eb KVM: MMU: Introduce kvm_pdptr_read_mmu
This function is implemented to load the pdptr pointers of
the currently running guest (l1 or l2 guest). Therefore it
takes care about the current paging mode and can read pdptrs
out of l2 guest physical memory.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:42 +02:00
Joerg Roedel ff03a073e7 KVM: MMU: Add kvm_mmu parameter to load_pdptrs function
This function need to be able to load the pdptrs from any
mmu context currently in use. So change this function to
take an kvm_mmu parameter to fit these needs.
As a side effect this patch also moves the cached pdptrs
from vcpu_arch into the kvm_mmu struct.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:41 +02:00
Joerg Roedel d47f00a62b KVM: X86: Propagate fetch faults
KVM currently ignores fetch faults in the instruction
emulator. With nested-npt we could have such faults. This
patch adds the code to handle these.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:41 +02:00
Joerg Roedel d4f8cf664e KVM: MMU: Propagate the right fault back to the guest after gva_to_gpa
This patch implements logic to make sure that either a
page-fault/page-fault-vmexit or a nested-page-fault-vmexit
is propagated back to the guest.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:40 +02:00
Joerg Roedel 02f59dc9f1 KVM: MMU: Introduce init_kvm_nested_mmu()
This patch introduces the init_kvm_nested_mmu() function
which is used to re-initialize the nested mmu when the l2
guest changes its paging mode.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:39 +02:00
Joerg Roedel 3d06b8bfd4 KVM: MMU: Introduce kvm_read_nested_guest_page()
This patch introduces the kvm_read_guest_page_x86 function
which reads from the physical memory of the guest. If the
guest is running in guest-mode itself with nested paging
enabled it will read from the guest's guest physical memory
instead.
The patch also changes changes the code to use this function
where it is necessary.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:38 +02:00
Joerg Roedel 2329d46d21 KVM: MMU: Make walk_addr_generic capable for two-level walking
This patch uses kvm_read_guest_page_tdp to make the
walk_addr_generic functions suitable for two-level page
table walking.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:38 +02:00