The various inode creation code paths do not account for the compression
property, POSIX ACLs, or the parent inode item when starting a
transaction. Fix it by refactoring all of these code paths to use a new
function, btrfs_new_inode_prepare(), which computes the correct number
of items. To do so, it needs to know whether POSIX ACLs will be created,
so move the ACL creation into that function. To reduce the number of
arguments that need to be passed around for inode creation, define
struct btrfs_new_inode_args containing all of the relevant information.
btrfs_new_inode_prepare() will also be a good place to set up the
fscrypt context and encrypted filename in the future.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_{mknod,create,mkdir}() are now identical other than the inode
initialization and some inconsequential function call order differences.
Factor out the common code to reduce code duplication.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of calling new_inode() and inode_init_owner() inside of
btrfs_new_inode(), do it in the callers. This allows us to pass in just
the inode instead of the mnt_userns and mode and removes the need for
memalloc_nofs_{save,restores}() since we do it before starting a
transaction. In create_subvol(), it also means we no longer have to look
up the inode again to instantiate it. This also paves the way for some
more cleanups in later patches.
This also removes the comments about Smack checking i_op, which are no
longer true since commit 5d6c31910b ("xattr: Add
__vfs_{get,set,remove}xattr helpers"). Now it checks inode->i_opflags &
IOP_XATTR, which is set based on sb->s_xattr.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although we have btrfs_extent_buffer_leak_debug_check() (enabled by
CONFIG_BTRFS_DEBUG option) to detect and warn QA testers that we have
some extent buffer leakage, it's just pr_err(), not noisy enough for
fstests to cache.
So here we trigger a WARN_ON() if the allocated_ebs list is not empty.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the function btrfs_dev_replace_finishing, we dereferenced
fs_info->fs_devices 6 times. Use keep local variable for that.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function can be simplified by refactoring to use the new iterator
macro. No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a common pattern when searching for a key in btrfs:
* Call btrfs_search_slot to find the slot for the key
* Enter an endless loop:
* If the found slot is larger than the no. of items in the current
leaf, check the next leaf
* If it's still not found in the next leaf, terminate the loop
* Otherwise do something with the found key
* Increment the current slot and continue
To reduce code duplication, we can replace this code pattern with an
iterator macro, similar to the existing for_each_X macros found
elsewhere in the kernel. This also makes the code easier to understand
for newcomers by putting a name to the encapsulated functionality.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the subpage support for scrub, one page no longer always represents
one sector, thus scrub_bio::pagev and scrub_bio::sector_count are no
longer accurate.
Rename them to scrub_bio::sectors and scrub_bio::sector_count respectively.
This also involves scrub_ctx::pages_per_bio and other macros involved.
Now the renaming of pages involved in scrub is be finished.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the subpage support of scrub, scrub_sector is in fact just
representing one sector.
Thus the name scrub_page is no longer correct, rename it to
scrub_sector.
This also involves the following renames:
- spage -> sector
Normally we would just replace "page" with "sector" and result
something like "ssector".
But the repeating 's' is not really eye friendly.
So here we just simple use "sector", as there is nothing from MM layer
called "sector" to cause any confusion.
- scrub_parity::spages -> sectors_list
Normally we use plural to indicate an array, not a list.
Rename it to @sectors_list to be more explicit on the list part.
- Also reformat and update comments that get changed
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following will be renamed in this patch:
- scrub_block::pagev -> sectors
- scrub_block::page_count -> sector_count
- SCRUB_MAX_PAGES_PER_BLOCK -> SCRUB_MAX_SECTORS_PER_BLOCK
- page_num -> sector_num to iterate scrub_block::sectors
For now scrub_page is not yet renamed to keep the patch reasonable and
it will be updated in a followup.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_read_buffer() is useless, it just calls
btree_read_extent_buffer_pages() with exactly the same arguments.
So remove it and rename btree_read_extent_buffer_pages() to
btrfs_read_extent_buffer(), which is a shorter name, has the "btrfs_"
prefix (since it's used outside disk-io.c) and the name is clear enough
about what it does.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The comment at the top of read_block_for_search() is very outdated, as it
refers to the blocking versus spinning path locking modes. We no longer
have these two locking modes after we switched the btree locks from custom
code to rw semaphores. So update the comment to stop referring to the
blocking mode and put it more up to date.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When reading a btree node (or leaf), at read_block_for_search(), if we
can't find its extent buffer in the cache (the fs_info->buffer_radix
radix tree), then we unlock all upper level nodes before reading the
btree node/leaf from disk, to prevent blocking other tasks for too long.
However if we find that the extent buffer is in the cache but it is not
up to date, we don't unlock upper level nodes before reading it from disk,
potentially blocking other tasks on upper level nodes for too long.
Fix this inconsistent behaviour by unlocking upper level nodes if we need
to read a node/leaf from disk because its in-memory extent buffer is not
up to date. If we unlocked upper level nodes then we must return -EAGAIN
to the caller, just like the case where the extent buffer is not cached in
memory. And like that case, we determine if upper level nodes are locked
by checking only if the parent node is locked - if it isn't, then no other
upper level nodes are locked.
This is actually a rare case, as if we have an extent buffer in memory,
it typically has the uptodate flag set and passes all the checks done by
btrfs_buffer_uptodate().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When reading a btree node, at read_block_for_search(), if we don't find
the node's (or leaf) extent buffer in the cache, we will read it from
disk. Since that requires waiting on IO, we release all upper level nodes
from our path before reading the target node/leaf, and then return -EAGAIN
to the caller, which will make the caller restart the while btree search.
However we are causing the restart of btree search even for cases where
it is not necessary:
1) We have a path with ->skip_locking set to true, typically when doing
a search on a commit root, so we are never holding locks on any node;
2) We are doing a read search (the "ins_len" argument passed to
btrfs_search_slot() is 0), or we are doing a search to modify an
existing key (the "cow" argument passed to btrfs_search_slot() has
a value of 1 and "ins_len" is 0), in which case we never hold locks
for upper level nodes;
3) We are doing a search to insert or delete a key, in which case we may
or may not have upper level nodes locked. That depends on the current
minimum write lock levels at btrfs_search_slot(), if we had to split
or merge parent nodes, if we had to COW upper level nodes and if
we ever visited slot 0 of an upper level node. It's still common to
not have upper level nodes locked, but our current node must be at
least at level 1, for insertions, or at least at level 2 for deletions.
In these cases when we have locks on upper level nodes, they are always
write locks.
These cases where we are not holding locks on upper level nodes far
outweigh the cases where we are holding locks, so it's completely wasteful
to retry the whole search when we have no upper nodes locked.
So change the logic to not return -EAGAIN, and make the caller retry the
search, when we don't have the parent node locked - when it's not locked
it means no other upper level nodes are locked as well.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_new_inode() inherits the inode flags from the parent directory and
the mount options _after_ we fill the inode item. This works because all
of the callers of btrfs_new_inode() make further changes to the inode
and then call btrfs_update_inode(). It'd be better to fully initialize
the inode once to avoid the extra update, so as a first step, set the
inode flags _before_ filling the inode item.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Every call of btrfs_new_inode() is immediately preceded by a call to
btrfs_get_free_objectid(). Since getting an inode number is part of
creating a new inode, this is better off being moved into
btrfs_new_inode(). While we're here, get rid of the comment about
reclaiming inode numbers, since we only did that when using the ino
cache, which was removed by commit 5297199a8b ("btrfs: remove inode
number cache feature").
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For everything other than a subvolume root inode, we get the parent
objectid from the parent directory. For the subvolume root inode, the
parent objectid is the same as the inode's objectid. We can find this
within btrfs_new_inode() instead of passing it.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 4a8b34afa9 ("btrfs: handle ACLs on idmapped mounts") added this
parameter but didn't use it. __btrfs_set_acl() is the low-level helper
that writes an ACL to disk. The higher-level btrfs_set_acl() is the one
that translates the ACL based on the user namespace.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_new_inode() already returns an inode with nlink set to 1 (via
inode_init_always()). Get rid of the unnecessary set.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
new_inode() always returns an inode with i_blocks and i_bytes set to 0
(via inode_init_always()). Remove the unnecessary call to
inode_set_bytes() in btrfs_new_inode().
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_new_inode() always returns an inode with i_size and disk_i_size
set to 0 (via inode_init_always() and btrfs_alloc_inode(),
respectively). Remove the unnecessary calls to btrfs_i_size_write() in
btrfs_mkdir() and btrfs_create_subvol_root().
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a trivial wrapper around btrfs_add_link(). The only thing it
does other than moving arguments around is translating a > 0 return
value to -EEXIST. As far as I can tell, btrfs_add_link() won't return >
0 (and if it did, the existing callsites in, e.g., btrfs_mkdir() would
be broken). The check itself dates back to commit 2c90e5d658 ("Btrfs:
still corruption hunting"), so it's probably left over from debugging.
Let's just get rid of btrfs_add_nondir().
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs_qgroup_inherit(), btrfs_alloc_tree_block, or
btrfs_insert_root() fail in create_subvol(), we return without freeing
anon_dev. Reorganize the error handling in create_subvol() to fix this.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_rename() and btrfs_rename_exchange() don't account for enough
items. Replace the incorrect explanations with a specific breakdown of
the number of items and account them accurately.
Note that this glosses over RENAME_WHITEOUT because the next commit is
going to rework that, too.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_unlink_inode() calls btrfs_update_inode() on the parent
directory in order to update its size and sequence number. Make sure we
account for it.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Here is one fix, and 3 documentation updates for 5.18-rc7.
The fix is for the firmware loader which resolves a long-reported
problem where the credentials of the firmware loader could be set to a
userspace process without enough permissions to actually load the
firmware image. Many Android vendors have been reporting this for quite
some time.
The documentation updates are for the embargoed-hardware-issues.rst file
to add a new entry, change an existing one, and sort the list to make
changes easier in the future.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoEMSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynl8wCgw54h8hggK6eikgctGuyoLJZjDR4AnRVNvtQi
ItQ1+zHzBjkdz1s/DlM7
=/7MV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is one fix, and three documentation updates for 5.18-rc7.
The fix is for the firmware loader which resolves a long-reported
problem where the credentials of the firmware loader could be set to a
userspace process without enough permissions to actually load the
firmware image. Many Android vendors have been reporting this for
quite some time.
The documentation updates are for the embargoed-hardware-issues.rst
file to add a new entry, change an existing one, and sort the list to
make changes easier in the future.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation/process: Update ARM contact for embargoed hardware issues
Documentation/process: Add embargoed HW contact for Ampere Computing
Documentation/process: Make groups alphabetical and use tabs consistently
firmware_loader: use kernel credentials when reading firmware
Here are 2 small driver fixes for 5.18-rc7 that resolve reported
problems:
- slimbus driver irq bugfix
- interconnect sync state bugfix
Both of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoELfQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn1EACeMMP4A10lS7sKlgyM6ftMKA1hu7UAniih+zD/
yGi9Fx4SxUUhYKelF75P
=n7+j
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two small driver fixes for 5.18-rc7 that resolve reported
problems:
- slimbus driver irq bugfix
- interconnect sync state bugfix
Both of these have been in linux-next with no reported problems"
* tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom: Fix IRQ check in qcom_slim_probe
interconnect: Restore sync state by ignoring ipa-virt in provider count
Here are some small tty n_gsm and serial driver fixes for 5.18-rc7 that
resolve reported problems. They include:
- n_gsm fixes for reported issues
- 8250_mtk driver fixes for some platforms
- fsl_lpuart driver fix for reported problem.
- digicolor driver fix for reported problem.
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoEM8g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylkRgCePwdlqU8cJAePVKVEQVbBmqV2DQgAoL4aGeH7
/4ZvKAc/3AmUOBU+46sa
=my19
-----END PGP SIGNATURE-----
Merge tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty n_gsm and serial driver fixes for 5.18-rc7
that resolve reported problems. They include:
- n_gsm fixes for reported issues
- 8250_mtk driver fixes for some platforms
- fsl_lpuart driver fix for reported problem.
- digicolor driver fix for reported problem.
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fsl_lpuart: Don't enable interrupts too early
tty: n_gsm: fix invalid gsmtty_write_room() result
tty: n_gsm: fix mux activation issues in gsm_config()
tty: n_gsm: fix buffer over-read in gsm_dlci_data()
serial: 8250_mtk: Fix register address for XON/XOFF character
serial: 8250_mtk: Make sure to select the right FEATURE_SEL
serial: 8250_mtk: Fix UART_EFR register address
tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
Here are some small fixes for reported issues with some USB drivers.
They include:
- xhci fixes for xhci-mtk platform driver
- typec driver fixes for reported problems.
- cdc-wdm read-stuck fix
- gadget driver fix for reported race condition
- new usb-serial driver ids
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoENmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymxrwCeIzUtnkEw80tyjr3r/ciuZgfqM90AoJ50aiIV
YqYG8aVcUUrM47qQuYUX
=I21N
-----END PGP SIGNATURE-----
Merge tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small fixes for reported issues with some USB drivers.
They include:
- xhci fixes for xhci-mtk platform driver
- typec driver fixes for reported problems.
- cdc-wdm read-stuck fix
- gadget driver fix for reported race condition
- new usb-serial driver ids
All of these have been in linux-next with no reported problems"
* tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci-mtk: remove bandwidth budget table
usb: xhci-mtk: fix fs isoc's transfer error
usb: gadget: fix race when gadget driver register via ioctl
usb: typec: tcpci_mt6360: Update for BMC PHY setting
usb: gadget: uvc: allow for application to cleanly shutdown
usb: typec: tcpci: Don't skip cleanup in .remove() on error
usb: cdc-wdm: fix reading stuck on device close
USB: serial: qcserial: add support for Sierra Wireless EM7590
USB: serial: option: add Fibocom MA510 modem
USB: serial: option: add Fibocom L610 modem
USB: serial: pl2303: add device id for HP LM930 Display
- Fix KVM PR on 32-bit, which was broken by some MMU code refactoring.
Thanks to: Alexander Graf, Matt Evans.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmKA5psTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgHnjD/4/YU1y7XU/h0RjYwiKfVlVbIFXjFkB
xMgijdI87SCSU94O8h/7WqhVEwfS8dM+jBa9F4Ky6nOqLMnAE1B/zPzE1P9KAvLl
kilLQ9Wl/VhR+PqD62UofevhwsPA+neLkKKAfWMjMvRp4wHvAk18ILNAxhq4D3hP
7KyK4sQntBVwnObWuopJoEeKuoDFa/0VRr/VC29CKowWRzIgwo/OVBBzAxrYUT0g
HjhNO4zPyJ6mxanO24cWokXekxWKU07NvIeU4dP6nOreUJvfxfpmEbhsxrC8YLo1
Fy7MWGQLwvq8D7UHeWPh+OOhIuPQDIDseXaW3m4mkLmMqxy5Y+D2aCyto/Rl8B97
yPqWmcYjdLoac0CS3l+CQUcCTc5YPZ7zDkPkrKdvutyrPqgTkTgRFWrOIlLJtV7f
H++hVj0RMiFyjPPAUWNtByKwdwq+lAN1OqrtrksWhX6aSZJIgcR0pUQM1YFqDQU1
IOErcs2JjrwxYOGDIgB6zE/UNClDaoS5J0p4utgtnRyQB1VHnUqv8+3wP3+7ATYG
I7smX7ce/RRtLvJTXIgNc406ibj/TOW9icneBZ9m1+2WWcBb4JpUMiBBwyhCsn7x
xHzJLof4LLKxCdjalBb8w7mQ4yO5i9IHrOEgb/TD3P5MXjBhWZOljky+j7NUXzgb
9IFdAGOPnXwcFw==
=HVUs
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix KVM PR on 32-bit, which was broken by some MMU code refactoring.
Thanks to: Alexander Graf, and Matt Evans.
* tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
pasta from the corresponding s390 code screwed up the address calculation
for marking the sub-pmd ranges via memset by omitting the ALIGN_DOWN() to
calculate the proper start address. It's a mystery why this code is not
generic and shared because there is nothing architecture specific in there,
but that's too intrusive for a backportable fix.
-----BEGIN PGP SIGNATURE-----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=f+jf
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the handling of unpopulated sub-pmd spaces.
The copy & pasta from the corresponding s390 code screwed up the
address calculation for marking the sub-pmd ranges via memset by
omitting the ALIGN_DOWN() to calculate the proper start address.
It's a mystery why this code is not generic and shared because there
is nothing architecture specific in there, but that's too intrusive
for a backportable fix"
* tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix marking of unused sub-pmd ranges
in the middle of the arguments. This reordering broke BPF programs which
relied on the old argument list. While tracepoints are not considered
stable ABI, it's not trivial to make BPF cope with such a change, but it's
being worked on. For now restore the original argument order and move the
new argument to the end of the argument list.
-----BEGIN PGP SIGNATURE-----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=6Bvx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"The recent expansion of the sched switch tracepoint inserted a new
argument in the middle of the arguments. This reordering broke BPF
programs which relied on the old argument list.
While tracepoints are not considered stable ABI, it's not trivial to
make BPF cope with such a change, but it's being worked on. For now
restore the original argument order and move the new argument to the
end of the argument list"
* tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/tracing: Append prev_state to tp args instead
interrupt code. The consolidation of the interrupt handler invocation code
added an unconditional warning when generic_handle_domain_irq() is invoked
from outside hard interrupt context. That's overbroad as the requirement
for invoking these handlers in hard interrupt context is only required for
certain interrupt types. The subsequently called code already contains a
warning which triggers conditionally for interrupt chips which indicate
this requirement in their properties. Remove the overbroad one.
-----BEGIN PGP SIGNATURE-----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=pJj8
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a recent (introduced in 5.16) regression in the core
interrupt code.
The consolidation of the interrupt handler invocation code added an
unconditional warning when generic_handle_domain_irq() is invoked from
outside hard interrupt context. That's overbroad as the requirement
for invoking these handlers in hard interrupt context is only required
for certain interrupt types. The subsequently called code already
contains a warning which triggers conditionally for interrupt chips
which indicate this requirement in their properties.
Remove the overbroad one"
* tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
- Fix two NDEBUG warnings in 'perf bench numa'.
- Fix ARM coresight `perf test` failure.
- Sync linux/kvm.h with the kernel sources.
- Add James and Mike as Arm64 performance events reviewers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYn/zSgAKCRCyPKLppCJ+
J05jAP4gwHLXP1jcyixLRPrJc1tZjJlRSqdOkQn7n1wE4okh4QEA/2k4k+s4Onn6
YMCAJFFgzqi/U77uN5IBX3dLWZ02SAg=
=albT
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix two NDEBUG warnings in 'perf bench numa'
- Fix ARM coresight `perf test` failure
- Sync linux/kvm.h with the kernel sources
- Add James and Mike as Arm64 performance events reviewers
* tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
MAINTAINERS: Add James and Mike as Arm64 performance events reviewers
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf tests: Fix coresight `perf test` failure.
perf bench: Fix two numa NDEBUG warnings
fbdev:
- revert NULL deref fix that turned into a use-after-free
- prevent use-after-free in fbdev
- efifb/simplefb/vesafb: fix cleanup paths to avoid use-after-frees
dma-buf:
- fix panic in stats setup
vc4:
- fix hdmi build
nouveau:
- tegra iommu present fix
- fix leak in backlight name
vmwgfx:
- Black screen due to fences using FIFO checks on SVGA3
- Random black screens on boot due to uninitialized drm_mode_fb_cmd2
- Hangs on SVGA3 due to command buffers being used with gbobjects
-----BEGIN PGP SIGNATURE-----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=wF/s
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"Turns out I was right, some fixes hadn't made it to me yet. The vmwgfx
ones also popped up later, but all seem like bad enough things to fix.
The dma-buf, vc4 and nouveau ones are all pretty small.
The fbdev fixes are a bit more complicated: a fix to cleanup fbdev
devices properly, uncovered some use-after-free bugs in existing
drivers. Then the fix for those bugs wasn't correct. This reverts that
fix, and puts the proper fixes in place in the drivers to avoid the
use-after-frees.
This has had a fair number of eyes on it at this stage, and I'm
confident enough that it puts things in the right place, and is less
dangerous than reverting our way out of the initial change at this
stage.
fbdev:
- revert NULL deref fix that turned into a use-after-free
- prevent use-after-free in fbdev
- efifb/simplefb/vesafb: fix cleanup paths to avoid use-after-frees
dma-buf:
- fix panic in stats setup
vc4:
- fix hdmi build
nouveau:
- tegra iommu present fix
- fix leak in backlight name
vmwgfx:
- Black screen due to fences using FIFO checks on SVGA3
- Random black screens on boot due to uninitialized drm_mode_fb_cmd2
- Hangs on SVGA3 due to command buffers being used with gbobjects"
* tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm:
drm/vmwgfx: Disable command buffers on svga3 without gbobjects
drm/vmwgfx: Initialize drm_mode_fb_cmd2
drm/vmwgfx: Fix fencing on SVGAv3
drm/vc4: hdmi: Fix build error for implicit function declaration
dma-buf: call dma_buf_stats_setup after dmabuf is in valid list
fbdev: efifb: Fix a use-after-free due early fb_info cleanup
drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()
drm/nouveau/tegra: Stop using iommu_present()
fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: Prevent possible use-after-free in fb_release()
Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"
iommu detection improvement for nouveau, a memory leak fix for nouveau,
pointer dereference fix for dma_buf_file_release(), and a build breakage
fix for vc4
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYn4I8QAKCRDj7w1vZxhR
xTQqAQCERNogpvxEuKGk1643nNiPtDLbYcwJMifqa7sQIQk13AD9EKR9oV+JyIZj
2tS06uFF1qWQeXAgS8wGToirZ2E3Fgo=
=a0hl
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Multiple fixes to fbdev to address a regression at unregistration, an
iommu detection improvement for nouveau, a memory leak fix for nouveau,
pointer dereference fix for dma_buf_file_release(), and a build breakage
fix for vc4
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513073044.ymayac7x7bzatrt7@houat
Omar Sandoval
Qu Wenruo
Anand Jain
Gabriel Niebler
Filipe Manana
Linus Torvalds
Dave Airlie