commit 08b9e0ab8a upstream.
There is a potential race between queue_work() returning and the
queued-work running that could result in put_device() running before
get_device(). Introduce the cxl_nvdimm_bridge_state_work() helper that
takes the reference unconditionally, but drops it if no new work was
queued, to keep the references balanced.
Fixes: 8fdcb1704f ("cxl/pmem: Add initial infrastructure for pmem support")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163553734757.2509761.3305231863616785470.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca76a3a805 upstream.
cxl_pci_map_regblock() may return an ERR_PTR(), but cxl_pci_setup_regs()
is only prepared for NULL as the error case. Pick the minimal fix for
-stable backport purposes and just have cxl_pci_map_regblock() return
NULL for errors.
Fixes: f8a7e8c29b ("cxl/pci: Reserve all device regions at once")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163433325724.834522.17809774578178224149.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix detection of CXL host bridges to filter out disabled ACPI0016
devices in the ACPI DSDT.
- Fix kernel lockdown integration to disable raw commands when raw PCI
access is disabled.
- Fix a broken debug message.
- Add support for "Get Partition Info". I.e. enumerate the split between
volatile and persistent capacity on bi-modal CXL memory expanders.
- Re-factor the core by subject area. This is a work in progress.
- Prepare libnvdimm to understand CXL labels in addition to EFI labels.
This is a work in progress.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYTlXFQAKCRDfioYZHlFs
Z4LXAQCKhh1VHhPHHBF0xkWjriJecM7ZT0AuEXdD9SnX3B6tXgEA6hwIMKGFqEOS
hDqaQfk3ooydwEnItBhovFo+B8H+Qg4=
=CDUy
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
- Fix detection of CXL host bridges to filter out disabled ACPI0016
devices in the ACPI DSDT.
- Fix kernel lockdown integration to disable raw commands when raw PCI
access is disabled.
- Fix a broken debug message.
- Add support for "Get Partition Info". I.e. enumerate the split
between volatile and persistent capacity on bi-modal CXL memory
expanders.
- Re-factor the core by subject area. This is a work in progress.
- Prepare libnvdimm to understand CXL labels in addition to EFI labels.
This is a work in progress.
* tag 'cxl-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (25 commits)
cxl/registers: Fix Documentation warning
cxl/pmem: Fix Documentation warning
cxl/uapi: Fix defined but not used warnings
cxl/pci: Fix debug message in cxl_probe_regs()
cxl/pci: Fix lockdown level
cxl/acpi: Do not add DSDT disabled ACPI0016 host bridge ports
libnvdimm/labels: Add claim class helpers
libnvdimm/labels: Add type-guid helpers
libnvdimm/labels: Add blk special cases for nlabel and position helpers
libnvdimm/labels: Add blk isetcookie set / validation helpers
libnvdimm/labels: Add a checksum calculation helper
libnvdimm/labels: Introduce label setter helpers
libnvdimm/labels: Add isetcookie validation helper
libnvdimm/labels: Introduce getters for namespace label fields
cxl/mem: Adjust ram/pmem range to represent DPA ranges
cxl/mem: Account for partitionable space in ram/pmem ranges
cxl/pci: Store memory capacity values
cxl/pci: Simplify register setup
cxl/pci: Ignore unknown register block types
cxl/core: Move memdev management to core
...
Indicator string for mbox and memdev register set to status
incorrectly in error message.
Cc: <stable@vger.kernel.org>
Fixes: 30af97296f ("cxl/pci: Map registers based on capabilities")
Signed-off-by: Li Qiang (Johnny Li) <johnny.li@montage-tech.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163072205089.2250120.8103605864156687395.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A proposed rework of security_locked_down() users identified that the
cxl_pci driver was passing the wrong lockdown_reason. Update
cxl_mem_raw_command_allowed() to fail raw command access when raw pci
access is also disabled.
Fixes: 13237183c7 ("cxl/mem: Add a "RAW" send command")
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/163072204525.2250120.16615792476976546735.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
During CXL ACPI probe, host bridge ports are discovered by scanning
the ACPI0017 root port for ACPI0016 host bridge devices. The scan
matches on the hardware id of "ACPI0016". An issue occurs when an
ACPI0016 device is defined in the DSDT yet disabled on the platform.
Attempts by the cxl_acpi driver to add host bridge ports using a
disabled device fails, and the entire cxl_acpi probe fails.
The DSDT table includes an _STA method that sets the status and the
ACPI subsystem has checks available to examine it. One such check is
in the acpi_pci_find_root() path. Move the call to acpi_pci_find_root()
to the matching function to prevent this issue when adding either
upstream or downstream ports.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Fixes: 7d4b5ca2e2 ("cxl/acpi: Add downstream port data to cxl_port instances")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163072203957.2250120.2178685721061002124.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL spec defines the volatile DPA range to be 0 to Volatile memory size.
It further defines the persistent DPA range to follow directly after the
end of the Volatile DPA through the persistent memory size. Essentially
Volatile DPA range = [0, Volatile size)
Persistent DPA range = [Volatile size, Volatile size + Persistent size)
Adjust the pmem_range start to reflect this and remote the TODO.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210617221620.1904031-4-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Memory devices may specify volatile only, persistent only, and
partitionable space which when added together result in a total capacity.
If Identify Memory Device.Partition Alignment != 0 the device supports
partitionable space. This partitionable space can be split between
volatile and persistent space. The total volatile and persistent sizes
are reported in Get Partition Info. ie
active volatile memory = volatile only + partitionable volatile
active persistent memory = persistent only + partitionable persistent
Define cxl_mem_get_partition(), check for partitionable support, and use
cxl_mem_get_partition() if applicable.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The Identify Memory Device command returns information about the
volatile only and persistent only memory capacities. Store those values
in the cxl_mem structure for later use. While at it, reuse those
calculations to calculate the ram and pmem ranges.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210617221620.1904031-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
It is desirable to retain the mappings from the calling function. By
simplifying this code, it will be much more straightforward to do that.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210716231548.174778-3-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In an effort to explicit avoid supporting vendor specific register
blocks (which can happily be mapped from userspace), entirely skip
probing unknown types. The secondary benefit of this will be revealed
in the future with code simplification.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210716231548.174778-2-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The motivation for moving cxl_memdev allocation to the core (beyond
better file organization of sysfs attributes in core/ and drivers in
cxl/), is that device lifetime is longer than module lifetime. The cxl_pci
module should be free to come and go without needing to coordinate with
devices that need the text associated with cxl_memdev_release() to stay
resident. The move fixes a use after free bug when looping driver
load / unload with CONFIG_DEBUG_KOBJECT_RELEASE=y.
Another motivation for disconnecting cxl_memdev creation from cxl_pci is
to enable other drivers, like a unit test driver, to registers memdevs.
Fixes: b39cb1052a ("cxl/mem: Register CXL memX devices")
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162792540495.368511.9748638751088219595.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for moving cxl_memdev allocation to the core, introduce
cdevm_file_operations to coordinate file operations shutdown relative to
driver data release.
The motivation for moving cxl_memdev allocation to the core (beyond
better file organization of sysfs attributes in core/ and drivers in
cxl/), is that device lifetime is longer than module lifetime. The cxl_pci
module should be free to come and go without needing to coordinate with
devices that need the text associated with cxl_memdev_release() to stay
resident. The move will fix a use after free bug when looping driver
load / unload with CONFIG_DEBUG_KOBJECT_RELEASE=y.
Another motivation for passing in file_operations to the core cxl_memdev
creation flow is to allow for alternate drivers, like unit test code, to
define their own ioctl backends.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162792539962.368511.2962268954245340288.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The register mapping infrastructure is large enough to move to its own
compilation unit. This also cleans up an unnecessary include of <mem.h>
core/bus.c.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162800068975.665205.12895551621746585289.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Refactor the pmem / nvdimm-bridge functionality from core/bus.c to
core/pmem.c. Introduce drivers/core/core.h to communicate data
structures and helpers between the core bus and other functionality that
registers devices on the bus.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162792538899.368511.3881663908293411300.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL core is growing, and it's already arguably unmanageable. To support
future growth, move core functionality to a new directory and rename the
file to represent just bus support. Future work will remove non-bus
functionality.
Note that mem.h is renamed to cxlmem.h to avoid a namespace collision
with the global ARCH=um mem.h header.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162792537866.368511.8915631504621088321.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current naming is confusing and wrong. The Register Locator is
identified by the DSVSEC identifier, not an offset.
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210618003009.956929-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The ACPI CXL Early Discovery Table (CEDT) includes a list of CXL memory
resources in CXL Fixed Memory Window Structures (CFMWS). Retrieve each
CFMWS in the CEDT and add a cxl_decoder object to the root port (root0)
for each memory resource.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/d2b73eecfb7ea22e1103f1894b271a89958b4c41.1623968958.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The base address for the Host Bridge port component registers is located
in the CXL Host Bridge Structure (CHBS) of the ACPI CXL Early Discovery
Table (CEDT). Retrieve the CHBS for each Host Bridge (ACPI0016 device)
and include that base address in the port object.
Co-developed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/a475ce137b899bc7ae5ba9550b5f198cb29ccbfd.1623968958.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While a memX device on /sys/bus/cxl represents a CXL memory expander
control interface, a pmemX device represents the persistent memory
sub-functionality. It bridges the CXL subystem to the libnvdimm nmemX
control interface.
With this skeleton ndctl can now see persistent memory devices on a
"CXL" bus. Later patches add support for translating libnvdimm native
commands to CXL commands.
# ndctl list -BDiu -b CXL
{
"provider":"CXL",
"dev":"ndbus1",
"dimms":[
{
"dev":"nmem1",
"state":"disabled"
},
{
"dev":"nmem0",
"state":"disabled"
}
]
}
Given nvdimm_bus_unregister() removes all devices on an ndbus0 the
cxl_pmem infrastructure needs to arrange ->remove() to be triggered on
cxl_nvdimm devices to keep their enabled state synchronized with the
registration state of their corresponding device on the nvdimm_bus. In
other words, always arrange for cxl_nvdimm_driver.remove() to unregister
nvdimms from an nvdimm_bus ahead of the bus being unregistered.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162380012696.3039556.4293801691038740850.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Register an 'nvdimm-bridge' device to act as an anchor for a libnvdimm
bus hierarchy. Also, flesh out the cxl_bus definition to allow a
cxl_nvdimm_bridge_driver to attach to the bridge and trigger the
nvdimm-bus registration.
The creation of the bridge is gated on the detection of a PMEM capable
address space registered to the root. The bridge indirection allows the
libnvdimm module to remain unloaded on platforms without PMEM support.
Given that the probing of ACPI0017 is asynchronous to CXL endpoint
devices, and the expectation that CXL endpoint devices register other
PMEM resources on the 'CXL' nvdimm bus, a workqueue is added. The
workqueue is needed to run bus_rescan_devices() outside of the
device_lock() of the nvdimm-bridge device to rendezvous nvdimm resources
as they arrive. For now only the bus is taken online/offline in the
workqueue.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379909706.2993820.14051258608641140169.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Enable devices on the 'cxl' bus to be attached to drivers. The initial
user of this functionality is a driver for an 'nvdimm-bridge' device
that anchors a libnvdimm hierarchy attached to CXL persistent memory
resources. Other device types that will leverage this include:
cxl_port: map and use component register functionality (HDM Decoders)
cxl_nvdimm: translate CXL memory expander endpoints to libnvdimm
'nvdimm' objects
cxl_region: translate CXL interleave sets to libnvdimm 'region' objects
The pairing of devices to drivers is handled through the cxl_device_id()
matching to cxl_driver.id values. A cxl_device_id() of '0' indicates no
driver support.
In addition to ->match(), ->probe(), and ->remove() support for the
'cxl' bus introduce MODULE_ALIAS_CXL() to autoload modules containing
cxl-drivers. Drivers are added in follow-on changes.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379909190.2993820.6134168109678004186.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some of the commands have already been defined for the support of RAW
commands (to be blocked). Unlike their usage in the RAW interface, when
used through the supported interface, they will be coordinated and
marshalled along with other commands being issued by userspace and the
driver itself. That coordination will be added later.
The list of commands was determined based on the learnings from
libnvdimm and this list is provided directly from Dan.
Recommended-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210413140907.534404-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CXL.cache and CXL.mem registers begin after the CXL.io registers
which occupy the first 0x1000 bytes. The current code wasn't setting
this up properly for future users of the component registers. It was
correct for the probing code however.
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Fixes: 08422378c4 ("cxl/pci: Add HDM decoder capabilities")
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210611051113.224328-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The decoder count in the HDM decoder capability structure is an encoded
field. As defined in the spec:
Decoder Count: Reports the number of memory address decoders implemented
by the component.
0 – 1 Decoder
1 – 2 Decoders
2 – 4 Decoders
3 – 6 Decoders
4 – 8 Decoders
5 – 10 Decoders
All other values are reserved
Nothing is actually fixed by this as nothing actually used this mapping
yet.
Cc: Ira Weiny <ira.weiny@intel.com>
Fixes: 08422378c4 ("cxl/pci: Add HDM decoder capabilities")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210611190111.121295-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A cxl_decoder is a child of a cxl_port. It represents a hardware decoder
configuration of an upstream port to one or more of its downstream
ports. The decoder is either represented in CXL standard HDM decoder
registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability
Structure), or it is a static decode configuration communicated by
platform firmware (see the CXL Early Discovery Table: Fixed Memory
Window Structure).
The firmware described and hardware described decoders differ slightly
leading to 2 different sub-types of decoders, cxl_decoder_root and
cxl_decoder_switch. At the root level the decode capabilities restrict
what can be mapped beneath them. Mid-level switch decoders are
configured for either acclerator (type-2) or memory-expander (type-3)
operation, but they are otherwise agnostic to the type of memory
(volatile vs persistent) being mapped.
Here is an example topology from a single-ported host-bridge environment
without CFMWS decodes enumerated.
/sys/bus/cxl/devices/root0
├── devtype
├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00
├── port1
│ ├── decoder1.0
│ │ ├── devtype
│ │ ├── locked
│ │ ├── size
│ │ ├── start
│ │ ├── subsystem -> ../../../../../../bus/cxl
│ │ ├── target_list
│ │ ├── target_type
│ │ └── uevent
│ ├── devtype
│ ├── dport0 -> ../../../../pci0000:34/0000:34:00.0
│ ├── subsystem -> ../../../../../bus/cxl
│ ├── uevent
│ └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00
├── subsystem -> ../../../../bus/cxl
├── uevent
└── uport -> ../../ACPI0017:00
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While the resources enumerated by the CEDT.CFMWS identify a cxl_port
with host bridges as downstream ports, host bridges themselves are
upstream ports that decode to downstream ports represented by PCIe Root
Ports. Walk the PCIe Root Ports connected to a CXL Host Bridge,
identified by the ACPI0016 _HID, and add each one as a cxl_dport of the
host bridge cxl_port.
For now, component registers are not enumerated, only the first order
uport / dport relationships.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162325451145.2293126.10149150938788969381.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for infrastructure that enumerates and configures the CXL
decode mechanism of an upstream port to its downstream ports, add a
representation of a CXL downstream port.
On ACPI systems the top-most logical downstream ports in the hierarchy
are the host bridges (ACPI0016 devices) that decode the memory windows
described by the CXL Early Discovery Table Fixed Memory Window
Structures (CEDT.CFMWS).
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/162325450624.2293126.3533006409920271718.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CONFIG_CXL_BUS is default 'n' as expected for new functionality. When
that is enabled do not make the end user hunt for all the expected
sub-options to enable. For example CONFIG_CXL_BUS without CONFIG_CXL_MEM
is an odd/expert configuration, so is CONFIG_CXL_MEM without
CONFIG_CXL_ACPI (on ACPI capable platforms). Default CONFIG_CXL_MEM and
CONFIG_CXL_ACPI to CONFIG_CXL_BUS.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162325450105.2293126.17046356425194082921.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While CXL builds upon the PCI software model for enumeration and
endpoint control, a static platform component is required to bootstrap
the CXL memory layout. Similar to how ACPI identifies root-level PCI
memory resources, ACPI data enumerates the address space and interleave
configuration for CXL Memory.
In addition to identifying host bridges, ACPI is responsible for
enumerating the CXL memory space that can be addressed by downstream
decoders. This is similar to the requirement for ACPI to publish
resources via the _CRS method for PCI host bridges. Specifically, ACPI
publishes a table, CXL Early Discovery Table (CEDT), which includes a
list of CXL Memory resources, CXL Fixed Memory Window Structures
(CFMWS).
For now, introduce the core infrastructure for a cxl_port hierarchy
starting with a root level anchor represented by the ACPI0017 device.
Follow on changes model support for the configurable decode capabilities
of cxl_port instances, i.e. CXL switch support.
Co-developed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162325449515.2293126.15303270193010154608.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The expectation is that devm functions take 'struct device *' and pci
functions take 'struct pci_dev *'. Swap out the @pdev argument for @dev
and fixup related helpers.
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162216592374.3833641.13281743585064451514.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
An HDM decoder is defined in the CXL 2.0 specification as a mechanism
that allow devices and upstream ports to claim memory address ranges and
participate in interleave sets. HDM decoder registers are within the
component register block defined in CXL 2.0 8.2.3 CXL 2.0 Component
Registers as part of the CXL.cache and CXL.mem subregion.
The Component Register Block is found via the Register Locator DVSEC
in a similar fashion to how the CXL Device Register Block is found. The
primary difference is the capability id size of the Component Register
Block is a single DWORD instead of 4 DWORDS.
It's now possible to configure a CXL type 3 device's HDM decoder. Such
programming is expected for CXL devices with persistent memory, and hot
plugged CXL devices that participate in CXL.mem with volatile memory.
Add probe and mapping functions for the component register blocks.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Co-developed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210528004922.3980613-6-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some hardware implementations mix component and device registers into
the same BAR and the driver stack is going to need independent mapping
implementations for those 2 cases. Furthermore, it will be nice to have
finer grained mappings should user space want to map some register
blocks.
Now that individual register blocks are mapped; those blocks regions
should be reserved individually to fully separate the register blocks.
Release the 'global' memory reservation and create individual register
block region reservations through devm.
NOTE: pci_release_mem_regions() is still compatible with
pcim_enable_device() because it removes the automatic region release
when called. So preserve the pcim_enable_device() so that the pcim
interface can be called if needed.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210604005316.4187340-1-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The information required to map registers based on capabilities is
contained within the bars themselves. This means the bar must be mapped
to read the information needed and then unmapped to map the individual
parts of the BAR based on capabilities.
Change cxl_setup_device_regs() to return a new cxl_register_map, change
the name to cxl_probe_device_regs(). Allocate and place
cxl_register_maps on a list while processing all of the specified
register blocks.
After probing all the register blocks go back and map smaller registers
blocks based on their capabilities and dispose of the cxl_register_maps.
NOTE: pci_iomap() is not managed automatically via pcim_enable_device()
so be careful to call pci_iounmap() correctly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210604005036.4187184-1-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In order to remap individual register sets each bar region must be
reserved prior to mapping. Because the details of individual register
sets are contained within the BARs themselves, the bar must be mapped 2
times, once to extract this information and a second time for each
register set.
Rather than attempt to reserve each BAR individually and track if that
bar has been reserved. Open code pcim_iomap_regions() by first
reserving all memory regions on the device and then mapping the bars
individually as needed.
NOTE pci_request_mem_regions() does not need a corresponding
pci_release_mem_regions() because the pci device is managed via
pcim_enable_device().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210528004922.3980613-3-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Each register block located in the DVSEC needs to be decoded from 2
words, 'register offset high' and 'register offset low'.
Create a function, cxl_decode_register_block() to perform this decode
and return the bar, offset, and register type of the register block.
Then use the values decoded in cxl_mem_map_regblock() instead of passing
the raw registers.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210528004922.3980613-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
@cxlm.base only existed to support holding the base found in the
register block mapping code, and pass it along to the register setup
code. Now that the register setup function has all logic around managing
the registers, from DVSEC to iomapping up to populating our CXL specific
information, it is easy to turn the @base values into local variables
and remove them from our device driver state.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210520212953.1181695-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Start moving code around to ultimately get rid of @cxlm.base. The
@cxlm.base member serves no purpose other than intermediate storage of
the offset found in cxl_mem_map_regblock() later used by
cxl_mem_setup_regs(). Aside from wanting to get rid of this useless
member, it will help later when adding new register block identifiers.
While @cxlm.base still exists, it will become trivial to remove it in a
future patch.
No functional change is meant to be introduced in this patch.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210407222625.320177-4-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a new function specifically for mapping the register blocks and
offsets within. The new function can be used more generically for other
register block identifiers.
No functional change is meant to be introduced in this patch with the
exception of a dev_err printed when the device register block isn't
found.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210407222625.320177-3-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Vendor capabilities occupy 0x8000 to 0xFFFF according to CXL 2.0 spec
8.2.8.2.1 CXL Device Capabilities. While they are not defined by the
spec, they are allowed and not "unknown". Call this detail out in the
logs to let users easily distinguish the difference.
This patch is a squash of two earlier patches and take in some minor
suggestions from both Vishal and Dan.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20210520204852.1070780-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The 'Identify Device' mailbox command returns an 'lsa_size', which is
the size of the label storage area on the device. Export it as a sysfs
attribute so that userspace tooling to read/write the LSA can determine
the size without having to run an 'Identify Device' on their own.
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20210520194745.1095517-1-vishal.l.verma@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
As the driver has undergone development, it's become clear that the
majority [entirety?] of the current functionality in mem.c is actually a
layer encapsulating functionality exposed through PCI based
interactions. This layer can be used either in isolation or to provide
functionality for higher level functionality.
CXL capabilities exist in a parallel domain to PCIe. CXL devices are
enumerable and controllable via "legacy" PCIe mechanisms; however, their
CXL capabilities are a superset of PCIe. For example, a CXL device may
be connected to a non-CXL capable PCIe root port, and therefore will not
be able to participate in CXL.mem or CXL.cache operations, but can still
be accessed through PCIe mechanisms for CXL.io operations.
To properly represent the PCI nature of this driver, and in preparation for
introducing a new driver for the CXL.mem / HDM decoder (Host-managed Device
Memory) capabilities of a CXL memory expander, rename mem.c to pci.c so that
mem.c is available for this new driver.
The result of the change is that there is a clear layering distinction
in the driver, and a systems administrator may load only the cxl_pci
module and gain access to such operations as, firmware update, offline
provisioning of devices, and error collection. In addition to freeing up
the file name for another purpose, there are two primary reasons this is
useful,
1. Acting upon devices which don't have full CXL capabilities. This
may happen for instance if the CXL device is connected in a CXL
unaware part of the platform topology.
2. Userspace-first provisioning for devices without kernel driver
interference. This may be useful when provisioning a new device
in a specific manner that might otherwise be blocked or prevented
by the real CXL mem driver.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210526174413.802913-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While CXL Memory Device endpoints locate the CXL MMIO registers in a PCI
BAR, CXL root bridges have their MMIO base address described by platform
firmware. Refactor the existing register lookup into a generic facility
for endpoints and bridges to share.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162096972534.1865304.3218686216153688039.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for more generic shared functionality across endpoint
consumers of core cxl resources, and platform-firmware producers of
those resources, rename bus.c to core.c. In addition to the central
rendezvous for interleave coordination, the core will also define common
routines like CXL register block mapping.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162096972018.1865304.11079951161445408423.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL MMIO register blocks are organized by device type and capabilities.
There are Component registers, Device registers (yes, an ambiguous
name), and Memory Device registers (a specific extension of Device
registers).
It is possible for a given device instance (endpoint or port) to
implement register sets from multiple of the above categories.
The driver code that enumerates and maps the registers is type specific
so it is useful to have a dedicated type and helpers for each block
type.
At the same time, once the registers are mapped the origin type does not
matter. It is overly pedantic to reference the register block type in
code that is using the registers.
In preparation for the endpoint driver to incorporate Component registers
into its MMIO operations reorganize the registers to allow typed
enumeration + mapping, but anonymous usage. With the end state of
'struct cxl_regs' to be:
struct cxl_regs {
union {
struct {
CXL_DEVICE_REGS();
};
struct cxl_device_regs device_regs;
};
union {
struct {
CXL_COMPONENT_REGS();
};
struct cxl_component_regs component_regs;
};
};
With this arrangement the driver can share component init code with
ports, but when using the registers it can directly reference the
component register block type by name without the 'component_regs'
prefix.
So, map + enumerate can be shared across drivers of different CXL
classes e.g.:
void cxl_setup_device_regs(struct device *dev, void __iomem *base,
struct cxl_device_regs *regs);
void cxl_setup_component_regs(struct device *dev, void __iomem *base,
struct cxl_component_regs *regs);
...while inline usage in the driver need not indicate where the
registers came from:
readl(cxlm->regs.mbox + MBOX_OFFSET);
readl(cxlm->regs.hdm + HDM_OFFSET);
...instead of:
readl(cxlm->regs.device_regs.mbox + MBOX_OFFSET);
readl(cxlm->regs.component_regs.hdm + HDM_OFFSET);
This complexity of the definition in .h yields improvement in code
readability in .c while maintaining type-safety for organization of
setup code. It prepares the implementation to maintain organization in
the face of CXL devices that compose register interfaces consisting of
multiple types.
Given that this new container is named 'regs' rename the common register
base pointer @base, and fixup the kernel-doc for the missing @cxlmd
description.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/162096971451.1865304.13540251513463515153.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams
Linus Torvalds
Li Qiang (Johnny Li)
Alison Schofield
Ira Weiny
Ben Widawsky
Uwe Kleine-König
Vishal Verma