Граф коммитов

15 Коммитов

Автор SHA1 Сообщение Дата
Peter Rosin 02f513a097 pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
The DDRSDR controller fails miserably to put LPDDR1 memories in
self-refresh. Force the controller to think it has DDR2 memories
during the self-refresh period, as the DDR2 self-refresh spec is
equivalent to LPDDR1, and is correctly implemented in the
controller.

Assume that the second controller has the same fault, but that is
untested.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03 19:43:59 +01:00
Thierry Reding 24ef5745da soc/tegra: Add Tegra132 support
Add the chip ID for the NVIDIA Tegra132 SoC family.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-09 16:13:57 +01:00
Paul Walmsley 2b20b6164e soc/tegra: pmc: restrict compilation of suspend-related support to ARM
Tegra SoCs with 64-bit ARM support don't currently support deep CPU
low-power states in mainline Linux.  When this support is added in the
future, it will probably look rather different from the existing
32-bit ARM support, since the ARM64 maintainers' strong preference is
to use PSCI to implement it.

So, for the time being, prevent the CPU suspend-related code and data
in the Tegra PMC driver from compiling on ARM64.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Allen Martin <amartin@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-09 13:41:19 +01:00
Arnd Bergmann 5db4500257 Merge branch 'at91/cleanup5' into next/drivers
The at91 cleanups changed a lot of files, this merges in the
latest cleanups to resolve the conflicts

Conflicts:
	arch/arm/mach-at91/at91sam9260.c
	arch/arm/mach-at91/at91sam9261.c
	arch/arm/mach-at91/at91sam9263.c
	arch/arm/mach-at91/clock.c
	arch/arm/mach-at91/clock.h
	drivers/rtc/Kconfig

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-08 18:29:20 +01:00
Thierry Reding 8918465163 memory: Add NVIDIA Tegra memory controller support
The memory controller on NVIDIA Tegra exposes various knobs that can be
used to tune the behaviour of the clients attached to it.

Currently this driver sets up the latency allowance registers to the HW
defaults. Eventually an API should be exported by this driver (via a
custom API or a generic subsystem) to allow clients to register latency
requirements.

This driver also registers an IOMMU (SMMU) that's implemented by the
memory controller. It is supported on Tegra30, Tegra114 and Tegra124
currently. Tegra20 has a GART instead.

The Tegra SMMU operates on memory clients and SWGROUPs. A memory client
is a unidirectional, special-purpose DMA master. A SWGROUP represents a
set of memory clients that form a logical functional unit corresponding
to a single device. Typically a device has two clients: one client for
read transactions and one client for write transactions, but there are
also devices that have only read clients, but many of them (such as the
display controllers).

Because there is no 1:1 relationship between memory clients and devices
the driver keeps a table of memory clients and the SWGROUPs that they
belong to per SoC. Note that this is an exception and due to the fact
that the SMMU is tightly integrated with the rest of the Tegra SoC. The
use of these tables is discouraged in drivers for generic IOMMU devices
such as the ARM SMMU because the same IOMMU could be used in any number
of SoCs and keeping such tables for each SoC would not scale.

Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04 16:11:47 +01:00
Alexandre Belloni f0a0a58e6f ARM: at91: move sdramc/ddrsdr header to include/soc/at91
Move the (DDR) SDRAM controller headers to include/soc/at91 to remove the
dependency on mach/ headers from the at91-reset driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-13 12:03:44 +01:00
Thierry Reding 7232398abc ARM: tegra: Convert PMC to a driver
This commit converts the PMC support code to a platform driver. Because
the boot process needs to call into this driver very early, also set up
a minimal environment via an early initcall.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:43 +02:00
Thierry Reding 24fa5af810 soc/tegra: fuse: Set up in early initcall
Rather than rely on explicit initialization order called from SoC setup
code, use a plain initcall and rely on initcall ordering to take care of
dependencies.

This driver exposes some functionality (querying the chip ID) needed at
very early stages of the boot process. An early initcall is good enough
provided that some of the dependencies are deferred to later stages. To
make sure any abuses are easily caught, output a warning message if the
chip ID is queried while it can't be read yet.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:42 +02:00
Thierry Reding a2686766c8 soc/tegra: Implement runtime check for Tegra SoCs
Subsequent patches will move some of the initialization code from SoC
setup code to regular initcalls. To prevent breakage on other SoCs in
multi-platform builds, these initcalls need to check that they indeed
run on Tegra.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:41 +02:00
Peter De Schrijver 0d827a4343 soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
The Tegra20 fuse driver is the only user of tegra_apb_readl_using_dma().
Therefore we can simply the code by incorporating the APB DMA handling into
the driver directly. tegra_apb_writel_using_dma() is dropped because there
are no users.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:37:12 +02:00
Peter De Schrijver 783c8f4c84 soc/tegra: Add efuse driver for Tegra
Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124. This
replaces functionality previously provided in arch/arm/mach-tegra, which
is removed in this patch.

While at it, move the only user of the global tegra_revision variable
over to tegra_sku_info.revision and export tegra_fuse_readl() to allow
drivers to read calibration fuses.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:36:01 +02:00
Peter De Schrijver 35874f3617 ARM: tegra: move fuse exports to soc/tegra/fuse.h
All fuse related functionality will move to a driver in the following
patches. To prepare for this, export all the required functionality in a
global header file and move all users of fuse.h to soc/tegra/fuse.h.

While we're at it, remove tegra_bct_strapping, as its only user was
removed in Commit a7cbe92cef ("ARM: tegra: remove tegra EMC scaling
driver").

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:32:51 +02:00
Peter De Schrijver 3f394f8064 ARM: tegra: export apb dma readl/writel
Export APB DMA readl and writel. These are needed because we can't
access the fuses directly on Tegra20 without potentially causing a
system hang. Also have the APB DMA readl and writel return an error in
case of a read failure instead of just returning zero or ignore write
failures.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:36:44 +02:00
Thierry Reding 304664eab9 ARM: tegra: Use a function to get the chip ID
Instead of using a simple variable access to get at the Tegra chip ID,
use a function so that we can run additional code. This can be used to
determine where the chip ID is being accessed without being available.
That in turn will be handy for resolving boot sequence dependencies in
order to convert more code to regular initcalls rather than a sequence
fixed by Tegra SoC setup code.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:36:41 +02:00
Thierry Reding 306a7f9139 ARM: tegra: Move includes to include/soc/tegra
In order to not clutter the include/linux directory with SoC specific
headers, move the Tegra-specific headers out into a separate directory.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:26:47 +02:00