Added a new SA port attribute containing SM ClassPortInfo fields,
(ClassPortInfo fields: Table 126 IB Spec 1.3.). This is useful for
checking SM support for specific features. The attribute is cached
to avoid resending queries, caching is done when a successful
ClassPortInfo reply is received on the port. Invalidation of the
attribute is done on SM change events, SM re-registration events,
and SM LID change events. The fields in ClassPortInfo should not
change during SM runtime without an event.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fixes an oops that might happen if uverbs_close races with
remove_one.
Both contexts may run ib_uverbs_cleanup_ucontext, it depends
on the flow.
Currently, there is no protection for a case that remove_one
didn't make the cleanup it runs to its end, the underlying
ib_device was freed then uverbs_close will call
ib_uverbs_cleanup_ucontext and OOPs.
Above might happen if uverbs_close deleted the file from the list
then remove_one didn't find it and runs to its end.
Fixes to protect against that case by a new cleanup lock so that
ib_uverbs_cleanup_ucontext will be called always before that
remove_one is ended.
Fixes: 35d4a0b63d ("IB/uverbs: Fix race between ib_uverbs_open and remove_one")
Reported-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The kfree() function was called in a few cases by the mthca_reset()
function during error handling even if the passed variables "bridge_header"
and "hca_header" contained a null pointer.
Adjust jump targets according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The pci_dev_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The sc_return_credits() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Expose IB diagnostic hardware counters.
The counters count IB events and are applicable for IB and RoCE.
The counters can be divided into two groups, per device and per port.
Device counters are always exposed.
Port counters are exposed only if the firmware supports per port counters.
rq_num_dup and sq_num_to are only exposed if we have firmware support
for them, if we do, we expose them per device and per port.
rq_num_udsdprd and num_cqovf are device only counters.
rq - denotes responder.
sq - denotes requester.
|-----------------------|---------------------------------------|
| Name | Description |
|-----------------------|---------------------------------------|
|rq_num_lle | Number of local length errors |
|-----------------------|---------------------------------------|
|sq_num_lle | number of local length errors |
|-----------------------|---------------------------------------|
|rq_num_lqpoe | Number of local QP operation errors |
|-----------------------|---------------------------------------|
|sq_num_lqpoe | Number of local QP operation errors |
|-----------------------|---------------------------------------|
|rq_num_lpe | Number of local protection errors |
|-----------------------|---------------------------------------|
|sq_num_lpe | Number of local protection errors |
|-----------------------|---------------------------------------|
|rq_num_wrfe | Number of CQEs with error |
|-----------------------|---------------------------------------|
|sq_num_wrfe | Number of CQEs with error |
|-----------------------|---------------------------------------|
|sq_num_mwbe | Number of Memory Window bind errors |
|-----------------------|---------------------------------------|
|sq_num_bre | Number of bad response errors |
|-----------------------|---------------------------------------|
|sq_num_rire | Number of Remote Invalid request |
| | errors |
|-----------------------|---------------------------------------|
|rq_num_rire | Number of Remote Invalid request |
| | errors |
|-----------------------|---------------------------------------|
|sq_num_rae | Number of remote access errors |
|-----------------------|---------------------------------------|
|rq_num_rae | Number of remote access errors |
|-----------------------|---------------------------------------|
|sq_num_roe | Number of remote operation errors |
|-----------------------|---------------------------------------|
|sq_num_tree | Number of transport retries exceeded |
| | errors |
|-----------------------|---------------------------------------|
|sq_num_rree | Number of RNR NAK retries exceeded |
| | errors |
|-----------------------|---------------------------------------|
|rq_num_rnr | Number of RNR NAKs sent |
|-----------------------|---------------------------------------|
|sq_num_rnr | Number of RNR NAKs received |
|-----------------------|---------------------------------------|
|rq_num_oos | Number of Out of Sequence requests |
| | received |
|-----------------------|---------------------------------------|
|sq_num_oos | Number of Out of Sequence NAKs |
| | received |
|-----------------------|---------------------------------------|
|rq_num_udsdprd | Number of UD packets silently |
| | discarded on the Receive Queue due to |
| | lack of receive descriptor |
|-----------------------|---------------------------------------|
|rq_num_dup | Number of duplicate requests received |
|-----------------------|---------------------------------------|
|sq_num_to | Number of time out received |
|-----------------------|---------------------------------------|
|num_cqovf | Number of CQ overflows |
|-----------------------|---------------------------------------|
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a function to query diagnostics counters from the firmware.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a bit that indicates if the firmware supports per port
diagnostic counters.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Portmapper messages are short and do not occupy more than 512 bytes.
Lower portmapper message size to 512 bytes. This change significantly
reduces the amount of memory needed when trying to establish a large
number of connections simultaneously. The old value is based on page
size.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Decouple SG support from HW ability to do UD checksum.
This coupling is for historical reasons and removed with 'commit
ec5f061564 ("net: Kill link between CSUM and SG features.")'
During driver load it is assumed that device does not supports SG. The
final decision is taken after creating UD QP based on device capability.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We allocate a small tracking structure as part of mlx4_ib_resize_cq().
However, we don't need to use GFP_ATOMIC -- immediately after the
allocation, we call mlx4_cq_resize(), which allocates a command
mailbox with GFP_KERNEL and then sleeps on a firmware command, so we
better not be in an atomic context.
This actually has a real impact, because when this GFP_ATOMIC
allocation fails (and GFP_ATOMIC does fail in practice) then a
userspace consumer resizing a CQ will get a spurious failure that we
can easily avoid.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a strict policy in the Linux kernel that new drivers must be
disabled by default. Hence leave out the "default m" line from Kconfig.
Fixes: f48ad614c1 ("IB/hfi1: Move driver out of staging")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Jubin John <jubin.john@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: <stable@vger.kernel.org> # v4.7+
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a strict policy in the Linux kernel that new drivers must be
disabled by default. Hence leave out the "default m" line from Kconfig.
Fixes: 0194621b22 ("IB/rdmavt: Create module framework and handle driver registration")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Jubin John <jubin.john@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull UDF fixes and a reiserfs fix from Jan Kara:
"A couple of udf fixes (most notably a bug in parsing UDF partitions
which led to inability to mount recent Windows installation media) and
a reiserfs fix for handling kstrdup failure"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
reiserfs: check kstrdup failure
udf: Use correct partition reference number for metadata
udf: Use IS_ERR when loading metadata mirror file entry
udf: Don't BUG on missing metadata partition descriptor
This fixes include:
- at_xdmac fixes for residue and other stuff
- update MAINTAINERS for dma dt bindings
- mv_xor fix for incorrect offset
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=quSJ
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Some fixes has piled up, so time to send them upstream.
These fixes include:
- at_xdmac fixes for residue and other stuff
- update MAINTAINERS for dma dt bindings
- mv_xor fix for incorrect offset"
* tag 'dmaengine-fix-4.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: mv_xor: Fix incorrect offset in dma_map_page()
dmaengine: at_xdmac: double FIFO flush needed to compute residue
dmaengine: at_xdmac: fix residue corruption
dmaengine: at_xdmac: align descriptors on 64 bits
MAINTAINERS: Add file patterns for dma device tree bindings
Another batch of fixes for ARM SoC platforms. Most are smaller fixes,
Two areas that are worth pointing out are:
* OMAP had a handful of changes to voltage specs that caused a bit of churn,
most of volume of change in this branch is due to this.
* There are a couple of _rcuidle fixes from Paul that touch common code and
came in through the OMAP tree since they were the ones who saw the problems.
The rest is smaller changes across a handful of platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C0Az
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another batch of fixes for ARM SoC platforms. Most are smaller fixes.
Two areas that are worth pointing out are:
- OMAP had a handful of changes to voltage specs that caused a bit of
churn, most of volume of change in this branch is due to this.
- There are a couple of _rcuidle fixes from Paul that touch common
code and came in through the OMAP tree since they were the ones who
saw the problems.
The rest is smaller changes across a handful of platforms"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes
ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
ARM: OMAP2+: timer: add probe for clocksources
ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
arm: Use _rcuidle for smp_cross_call() tracepoints
MAINTAINERS: Add myself as reviewer of ARM FSL/NXP
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
ARM: imx6ul: Fix Micrel PHY mask
ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
ARM: dts: DRA74x: fix DSS PLL2 addresses
ARM: OMAP2: Enable Errata 430973 for OMAP3
ARM: dts: socfpga: Add missing PHY phandle
ARM: dts: exynos: Fix port nodes names for Exynos5420 Peach Pit board
ARM: dts: exynos: Fix port nodes names for Exynos5250 Snow board
ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator
ARM: dts: sun6i: primo81: Drop constraints on dc1sw regulator
ARM: dts: sunxi: Add OLinuXino Lime2 eMMC to the Makefile
...
- Fix dra7 for hardware issues limiting L4Per and L3init power domains
to on state. Without this the devices may not work correctly after
some time of use because of asymmetric aging. And related to this,
let's also remove the unusable states.
- Always select omap interconnect for am43x as otherwise the am43x
only configurations will not boot properly. This can happen easily
for any product kernels that leave out other SoCs to save memory.
- Fix DSS PLL2 addresses that have gone unused for now
- Select erratum 430973 for omap3, this is now safe to do and can
save quite a bit of debugging time for people who may have left
it out.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mQyc
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.7-rc cycle:
- Fix dra7 for hardware issues limiting L4Per and L3init power domains
to on state. Without this the devices may not work correctly after
some time of use because of asymmetric aging. And related to this,
let's also remove the unusable states.
- Always select omap interconnect for am43x as otherwise the am43x
only configurations will not boot properly. This can happen easily
for any product kernels that leave out other SoCs to save memory.
- Fix DSS PLL2 addresses that have gone unused for now
- Select erratum 430973 for omap3, this is now safe to do and can
save quite a bit of debugging time for people who may have left
it out.
* tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
ARM: dts: DRA74x: fix DSS PLL2 addresses
ARM: OMAP2: Enable Errata 430973 for OMAP3
+ Linux 4.7-rc2
Signed-off-by: Olof Johansson <olof@lixom.net>
- Two boot warning fixes from the RCU tree that should have gotten
merged several weeks ago already but did not because of issues
with who merges them. Paul has now split the RCU warning fixes into
sets for various maintainers.
- Fix ams-delta FIQ regression caused by omap1 sparse IRQ changes
- Fix PM for omap3 boards using timer12 and gptimer, like the
original beagleboard
- Fix hangs on am437x-sk-evm by lowering the I2C bus speed
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=P0Vi
-----END PGP SIGNATURE-----
Merge tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.7-rc cycle:
- Two boot warning fixes from the RCU tree that should have gotten
merged several weeks ago already but did not because of issues
with who merges them. Paul has now split the RCU warning fixes into
sets for various maintainers.
- Fix ams-delta FIQ regression caused by omap1 sparse IRQ changes
- Fix PM for omap3 boards using timer12 and gptimer, like the
original beagleboard
- Fix hangs on am437x-sk-evm by lowering the I2C bus speed
* tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
ARM: OMAP2+: timer: add probe for clocksources
ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
arm: Use _rcuidle for smp_cross_call() tracepoints
arm: Use _rcuidle tracepoint to allow use from idle
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch fixes a non-booting issue in Mainline.
When booting with a compressed kernel, we need to be careful how we
populate memory close to DDR start. AUTO_ZRELADDR is enabled by default
in multi-arch enabled configurations, which place some restrictions on
where the kernel is placed and where it will be uncompressed to on boot.
AUTO_ZRELADDR takes the decompressor code's start address and masks out
the bottom 28 bits to obtain an address to uncompress the kernel to
(thus a load address of 0x42000000 means that the kernel will be
uncompressed to 0x40000000 i.e. DDR START on this platform).
Even changing the load address to after the co-processor's shared memory
won't render a booting platform, since the AUTO_ZRELADDR algorithm still
ensures the kernel is uncompressed into memory shared with the first
co-processor (0x40000000).
Another option would be to move loading to 0x4A000000, since this will
mean the decompressor will decompress the kernel to 0x48000000. However,
this would mean a large chunk (0x44000000 => 0x48000000 (64MB)) of
memory would essentially be wasted for no good reason.
Until we can work with ST to find a suitable memory location to
relocate co-processor shared memory, let's disable the shared memory
nodes. This will ensure a working platform in the mean time.
NB: The more observant of you will notice that we're leaving the DMU
shared memory node enabled; this is because a) it is the only one in
active use at the time of this writing and b) it is not affected by
the current default behaviour which is causing issues.
Fixes: fe135c6 (ARM: dts: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Correct Micrel PHY mask to fix the issue that i.MX6UL ethernet works
in U-Boot but not in kernel.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXYg70AAoJEFBXWFqHsHzO/dcH/jrXxr9zJgXclSVjLx0a+HJB
27v2KtrTBKjeLBOuv1WE5J49SA4PaQ8og7MeAUGIVeuXjGk7v4Ba/+3CIauXQ7fF
oEBr6e5WbzHeoSXpwgPkuMAA0vQ09kIKy2uUOecdIVrCCfS+N1koPj/jjzSTWNdk
7OOTI5itm2T4KeuFTm5RqN0JwhsAgVECuA3JZWvmTCXScC1bjFKhi9wRcBIjt5zf
jOVYJ3kCM7OqxCp82EM6SBY0q2MNkUlV50PjKVYeSpeiSJw3nvg+yBlvwCMTssbn
EdH8cYI/Y+snbcvfsEJMzEpoPgBAujKxQaT3aDVF0mSkH0UykfoPjUmTFrOpjSY=
=fD61
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
The i.MX fixes for 4.7:
- Correct Micrel PHY mask to fix the issue that i.MX6UL ethernet works
in U-Boot but not in kernel.
* tag 'imx-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx6ul: Fix Micrel PHY mask
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull ARM fixes from Russell King:
"A couple of fixes for pmd_mknotpresent()/pmd_present() for LPAE
systems"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8579/1: mm: Fix definition of pmd_mknotpresent
ARM: 8578/1: mm: ensure pmd_present only checks the valid bit
Here are a bunch (65) of USB fixes for 4.7-rc4. Sorry about the
quantity, I've been slow in getting these out. The majority are the
"normal" gadget, musb, and xhci fixes, that we all are used to. There
are also a few other tiny fixes resolving a number of reported issues
that showed up in 4.7-rc1.
All of these have been in linux-next.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAldlbRgACgkQMUfUDdst+ynNQACeMwami14392grxjLQvhCtR29u
ekkAoMK+vLu79mbLPhoBmPo4YCUvSptw
=1X1d
-----END PGP SIGNATURE-----
Merge tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch (65) of USB fixes for 4.7-rc4. Sorry about the
quantity, I've been slow in getting these out.
The majority are the "normal" gadget, musb, and xhci fixes, that we
all are used to. There are also a few other tiny fixes resolving a
number of reported issues that showed up in 4.7-rc1.
All of these have been in linux-next"
* tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
usbip: rate limit get_frame_number message
usb: musb: sunxi: Remove bogus "Frees glue" comment
usb: musb: sunxi: Fix NULL ptr deref when gadget is registered before musb
usb: echi-hcd: Add ehci_setup check before echi_shutdown
usb: host: ehci-msm: Conditionally call ehci suspend/resume
MAINTAINERS: Add file patterns for usb device tree bindings
usb: host: ehci-tegra: Avoid getting the same reset twice
usb: host: ehci-tegra: Grab the correct UTMI pads reset
USB: mos7720: delete parport
USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails
phy: ti-pipe3: Program the DPLL even if it was already locked
usb: musb: Stop bulk endpoint while queue is rotated
usb: musb: Ensure rx reinit occurs for shared_fifo endpoints
usb: musb: host: correct cppi dma channel for isoch transfer
usb: musb: only restore devctl when session was set in backup
usb: phy: Check initial state for twl6030
usb: musb: Use normal module_init for 2430 glue
usb: musb: Remove pm_runtime_set_irq_safe
usb: musb: Remove extra PM runtime calls from 2430 glue layer
usb: musb: Return error value from musb_mailbox
...
Here are a number of IIO and Staging bugfixes for 4.7-rc4.
Nothing huge, the normal amount of iio driver fixes, and some small
staging driver bugfixes for some reported problems (2 are reverts of
patches that went into 4.7-rc1). All have been in linux-next with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAldlbB4ACgkQMUfUDdst+ykpkACggRrmGzuiDe1hQHbq1J+jaokX
V2kAoK0WiQ66uv4nd1FbLx2CcUb0xgI5
=c2n1
-----END PGP SIGNATURE-----
Merge tag 'staging-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO and staging fixes from Greg KH:
"Here are a number of IIO and staging bugfixes for 4.7-rc4.
Nothing huge, the normal amount of iio driver fixes, and some small
staging driver bugfixes for some reported problems (2 are reverts of
patches that went into 4.7-rc1). All have been in linux-next with no
reported issues"
* tag 'staging-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (24 commits)
Revert "Staging: rtl8188eu: rtw_efuse: Use sizeof type *pointer instead of sizeof type."
Revert "Staging: drivers: rtl8188eu: use sizeof(*ptr) instead of sizeof(struct)"
staging: lustre: lnet: Don't access NULL NI on failure path
iio: hudmidity: hdc100x: fix incorrect shifting and scaling
iio: light apds9960: Add the missing dev.parent
iio: Fix error handling in iio_trigger_attach_poll_func
iio: st_sensors: Disable DRDY at init time
iio: st_sensors: Init trigger before irq request
iio: st_sensors: switch to a threaded interrupt
iio: light: bh1780: assign a static name
iio: bh1780: dereference the client properly
iio: humidity: hdc100x: fix IIO_TEMP channel reporting
iio:st_pressure: fix sampling gains (bring inline with ABI)
iio: proximity: as3935: fix buffer stack trashing
iio: proximity: as3935: remove triggered buffer processing
iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output
max44000: Remove scale from proximity
iio: humidity: am2315: Remove a stray unlock
iio: humidity: hdc100x: correct humidity integration time mask
iio: pressure: bmp280: fix error message for wrong chip id
...
Here are a small number of debugfs, ISA, and one driver core fix for 4.7-rc4.
All of these resolve reported issues. The ISA ones have spent the least
amount of time in linux-next, sorry about that, I didn't realize they
were regressions that needed to get in now (thanks to Thorsten for the
prodding!) but they do all pass the 0-day bot tests. The others have
been in linux-next for a while now.
Full details about them are in the shortlog below.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAldlbeQACgkQMUfUDdst+ymnFACfaWhEKA/84jwNNHiim92diJrY
zYsAoLOmpBw68yL6qTSZbcWJF4Flb6Xk
=N8M2
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are a small number of debugfs, ISA, and one driver core fix for
4.7-rc4.
All of these resolve reported issues. The ISA ones have spent the
least amount of time in linux-next, sorry about that, I didn't realize
they were regressions that needed to get in now (thanks to Thorsten
for the prodding!) but they do all pass the 0-day bot tests. The
others have been in linux-next for a while now.
Full details about them are in the shortlog below"
* tag 'driver-core-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
isa: Dummy isa_register_driver should return error code
isa: Call isa_bus_init before dependent ISA bus drivers register
watchdog: ebc-c384_wdt: Allow build for X86_64
iio: stx104: Allow build for X86_64
gpio: Allow PC/104 devices on X86_64
isa: Allow ISA-style drivers on modern systems
base: make module_create_drivers_dir race-free
debugfs: open_proxy_open(): avoid double fops release
debugfs: full_proxy_open(): free proxy on ->open() failure
kernel/kcov: unproxify debugfs file's fops
Here are a small number of char and misc driver fixes for 4.7-rc4. They
resolve some minor issues that have been reported, and have all been in
linux-next.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAldlbIQACgkQMUfUDdst+ykiUwCggGwKkNPL3OyCTeUr5Mi1MKfP
xKcAoLn896E6gliRTmb8NHoE5Prxx2Y4
=aoPm
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a small number of char and misc driver fixes for 4.7-rc4.
They resolve some minor issues that have been reported, and have all
been in linux-next"
* tag 'char-misc-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: Handle build path error
coresight: Fix erroneous memset in tmc_read_unprepare_etr
coresight: Fix tmc_read_unprepare_etr
coresight: Fix NULL pointer dereference in _coresight_build_path
extcon: palmas: Fix boot up state of VBUS when using GPIO detection
mcb: Acquire reference to carrier module in core
mcb: Acquire reference to device in probe
mei: don't use wake_up_interruptible for wr_ctrl
Pull btrfs fixes from Chris Mason:
"The most user visible change here is a fix for our recent superblock
validation checks that were causing problems on non-4k pagesized
systems"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: btrfs_check_super_valid: Allow 4096 as stripesize
btrfs: remove build fixup for qgroup_account_snapshot
btrfs: use new error message helper in qgroup_account_snapshot
btrfs: avoid blocking open_ctree from cleaner_kthread
Btrfs: don't BUG_ON() in btrfs_orphan_add
btrfs: account for non-CoW'd blocks in btrfs_abort_transaction
Btrfs: check if extent buffer is aligned to sectorsize
btrfs: Use correct format specifier
Revert a recent ACPICA commit that introduced a suspend-to-RAM
regression on one system due to incorrect information in its ACPI
tables that had not been taken into consideration at all before (and
everything worked), but the commit in question started to use it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OaOr
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a recent ACPICA commit that introduced a suspend-to-RAM
regression on one system due to incorrect information in its ACPI
tables that had not been taken into consideration at all before (and
everything worked), but the commit in question started to use it"
* tag 'acpi-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()"
- Fix a recent regression in the intel_pstate driver that may
lead to degraded performance on some systems due to missing
turbo state entry in the table returned by the ACPI _PSS
object (Srinivas Pandruvada).
- Fix a recent regression in the OPP (operating performance points)
framework that may lead to degraded performance on some systems
where the OPP table is created too early (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=BG8V
-----END PGP SIGNATURE-----
Merge tag 'pm-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fixes for two recent regressions that may lead to degraded performance
(operating performance points framework, intel_pstate).
Specifics:
- Fix a recent regression in the intel_pstate driver that may lead to
degraded performance on some systems due to missing turbo state
entry in the table returned by the ACPI _PSS object (Srinivas
Pandruvada).
- Fix a recent regression in the OPP (operating performance points)
framework that may lead to degraded performance on some systems
where the OPP table is created too early (Viresh Kumar)"
* tag 'pm-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / OPP: Add 'UNKNOWN' status for shared_opp in struct opp_table
cpufreq: intel_pstate: Adjust _PSS[0] freqeuency if needed
Pull HID subsystem fixes from Jiri Kosina:
- kernel panic fix in hid-elo from Oliver Neukum
- Surface Pro 3 device quirk from Benjamin Tissoires
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: multitouch: Add MT_QUIRK_NOT_SEEN_MEANS_UP to Surface Pro 3
HID: elo: kill not flush the work
The inline isa_register_driver stub simply allows compilation on systems
with CONFIG_ISA disabled; the dummy isa_register_driver does not
register an isa_driver at all. The inline isa_register_driver should
return -ENODEV to indicate lack of support when attempting to register
an isa_driver on such a system with CONFIG_ISA disabled.
Cc: Matthew Wilcox <matthew@wil.cx>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Ye Xiaolong
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The isa_bus_init function must be called before drivers which utilize
the ISA bus driver are registered. A race condition for initilization
exists if device_initcall is used (the isa_bus_init callback is placed
in the same initcall level as dependent drivers which use module_init).
This patch ensures that isa_bus_init is called first by utilizing
postcore_initcall in favor of device_initcall.
Fixes: a5117ba7da ("[PATCH] Driver model: add ISA bus")
Cc: Rene Herman <rene.herman@keyaccess.nl>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the introduction of the ISA_BUS_API Kconfig option, ISA-style
drivers may be built for X86_64 architectures. This patch changes the
ISA Kconfig option dependency of the WinSystems EBC-C384 watchdog timer
driver to ISA_BUS_API, thus allowing it to build for X86_64 as it is
expected to.
Cc: Wim Van Sebroeck <wim@iguana.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the introduction of the ISA_BUS_API Kconfig option, ISA-style
drivers may be built for X86_64 architectures. This patch changes the
ISA Kconfig option dependency of the Apex Embedded Systems STX104 DAC
driver to ISA_BUS_API, thus allowing it to build for X86_64 as it is
expected to.
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the introduction of the ISA_BUS_API Kconfig option, ISA-style
drivers may be built for X86_64 architectures. This patch changes the
ISA Kconfig option dependency of the PC/104 drivers to ISA_BUS_API, thus
allowing them to build for X86_64 as they are expected to.
Cc: Alexandre Courbot <gnurou@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several modern devices, such as PC/104 cards, are expected to run on
modern systems via an ISA bus interface. Since ISA is a legacy interface
for most modern architectures, ISA support should remain disabled in
general. Support for ISA-style drivers should be enabled on a per driver
basis.
To allow ISA-style drivers on modern systems, this patch introduces the
ISA_BUS_API and ISA_BUS Kconfig options. The ISA bus driver will now
build conditionally on the ISA_BUS_API Kconfig option, which defaults to
the legacy ISA Kconfig option. The ISA_BUS Kconfig option allows the
ISA_BUS_API Kconfig option to be selected on architectures which do not
enable ISA (e.g. X86_64).
The ISA_BUS Kconfig option is currently only implemented for X86
architectures. Other architectures may have their own ISA_BUS Kconfig
options added as required.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's annoying to constantly see the same "Not yet implemented" message
over and over with nothing able to be done about it, so rate limit it
for now to keep user's logs "clean".
Reported-by: Lars Täuber <lars.taeuber@web.de>
Tested-by: Lars Täuber <lars.taeuber@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit b5e12ec383 ("Staging: rtl8188eu: rtw_efuse: Use
sizeof type *pointer instead of sizeof type.").
This commit is wrong, the rtw_malloc2d helper function takes the size of
the array elements as its 3th argument, whereas sizeof(*eFuseWord)
gives the size of a pointer instead of the size of a u16.
Since sizeof(void *) > sizeof(u16) this has no adverse effects, but it
is still wrong.
Cc: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 99aded71b5 ("Staging: drivers: rtl8188eu: use
sizeof(*ptr) instead of sizeof(struct)").
This commit is wrong, as adapt->HalData has a type of "void *", so
now we are allocating a much to small struct, which causes the driver
to overwrite random memory which leads to a non working driver and
various system crashes.
Cc: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Plug the ongoing spin_unlock_wait/spin_is_locked mess
- KGDB protocol fix to sync w/ GDB
- Fix MIDR-based PMU probing for old 32-bit SMP systems (OMAP4/Realview)
- Minor tweaks to the fault handling path
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJXY97DAAoJELescNyEwWM08fYH/3QSj8P11PPIoyu1qEs+9kj1
r7lQGLMZoI/VS7OGPmgwpbQRHk227h0Rz4UnQ4/fTharVs5Pv9iPxnFKjCRCVVGK
VuI815tWC+0mKlJ4ztn8cJk7+GgWiZttAn5qWafuXQUTfqm+ywZOxfiU0+aC9Ytn
k5m3G46cyAvrBcNwLFcrwavzdyVjy/O3nEQVWmzT7uXmPknr52BmWjk3VuCMPdYd
tEjoRK3Nt2xMV3E4A6oIINBz1KmmqGVW3Nzx2prD0d0oGwyT+3FDlHbm+b/fn7aK
ti18FPUDiNSE67enYQ1+3wEyn1Ge/0Z/lLnKJxWXv4+qk3zwsCkp4h/SkOqv3fM=
=0YtF
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main things are getting kgdb up and running with upstream GDB
after a protocol change was reverted and fixing our spin_unlock_wait
and spin_is_locked implementations after doing some similar work with
PeterZ on the qspinlock code last week. Whilst we haven't seen any
failures in practice, it's still worth getting this fixed.
Summary:
- Plug the ongoing spin_unlock_wait/spin_is_locked mess
- KGDB protocol fix to sync w/ GDB
- Fix MIDR-based PMU probing for old 32-bit SMP systems
(OMAP4/Realview)
- Minor tweaks to the fault handling path"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kgdb: Match pstate size with gdbserver protocol
arm64: spinlock: Ensure forward-progress in spin_unlock_wait
arm64: spinlock: fix spin_unlock_wait for LSE atomics
arm64: spinlock: order spin_{is_locked,unlock_wait} against local locks
arm: pmu: Fix non-devicetree probing
arm64: mm: mark fault_info table const
arm64: fix dump_instr when PAN and UAO are in use
Three patches queued up:
* Fix for ARM-SMMU to add a missing iommu-ops callback which is
required by common iommu code
* Fix for the rockchip iommu where the wrong MMUs got the
commands
* A regression fix for the Intel VT-d driver. The regression
only showed up on X58 chipsets with more than one iommu. These
chipsets seem to require that QI is enabled on all IOMMUs
before it can be used.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=CrjN
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Three patches queued up:
- Fix for ARM-SMMU to add a missing iommu-ops callback which is
required by common iommu code
- Fix for the rockchip iommu where the wrong MMUs got the commands
- A regression fix for the Intel VT-d driver. The regression only
showed up on X58 chipsets with more than one iommu. These chipsets
seem to require that QI is enabled on all IOMMUs before it can be
used"
* tag 'iommu-fixes-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Enable QI on all IOMMUs before setting root entry
iommu/rockchip: Fix zap cache during device attach
iommu/arm-smmu: Wire up map_sg for arm-smmu-v3
Older btrfs-progs/mkfs.btrfs sets 4096 as the stripesize. Hence
restricting stripesize to be equal to sectorsize would cause super block
validation to return an error on architectures where PAGE_SIZE is not
equal to 4096.
Hence as a workaround, this commit allows stripesize to be set to 4096
bytes.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduced in 2c1984f244 ("btrfs: build fixup for
qgroup_account_snapshot") as temporary bisectability build fixup.
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes a problem introduced in commit 2f3165ecf1
"btrfs: don't force mounts to wait for cleaner_kthread to delete one or more subvolumes".
open_ctree eventually calls btrfs_replay_log which in turn calls
btrfs_commit_super which tries to lock the cleaner_mutex, causing a
recursive mutex deadlock during mount.
Instead of playing whack-a-mole trying to keep up with all the
functions that may want to lock cleaner_mutex, put all the cleaner_mutex
lockers back where they were, and attack the problem more directly:
keep cleaner_kthread asleep until the filesystem is mounted.
When filesystems are mounted read-only and later remounted read-write,
open_ctree did not set fs_info->open and neither does anything else.
Set this flag in btrfs_remount so that neither btrfs_delete_unused_bgs
nor cleaner_kthread get confused by the common case of "/" filesystem
read-only mount followed by read-write remount.
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Alex Vesker
Jason Gunthorpe
Markus Elfring
Mark Bloch
Mustafa Ismail
Yuval Shaia
Roland Dreier
Bart Van Assche
Linus Torvalds
Olof Johansson
Lee Jones
William Breathitt Gray
Greg Kroah-Hartman
Rafael J. Wysocki
Hans de Goede
Chris Mason
Chandan Rajendra
David Sterba
Zygo Blaxell