Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmI7YBcACgkQMUZtbf5S
IrveSBAAmSNJlUK6vPsnNzs7IhsZnfI/AUjm2TCLZnlhKttbpI4A/4Pohk33V7RS
FGX7f8kjEfhUwrIiLDgeCnztNHRECrCmk6aZc/jLEvecmTauJ+f6kjShkDY/wix+
AkPHmrZnQeLPAEVuljDdV+sL6ik08+zQL7PazIYHsaSKKC0MGQptRwcri8PLRAKE
KPBAhVhleq2rAZ/ntprSN52F4Af6rpFTrPIWuN8Bqdbc9dy5094LT0mpOOWYvgr3
/DLvvAPuLemwyIQkjWknVKBRUAQcmNPC+BY3J8K3LRaiNhekGqOFan46BfqP+k2J
6DWu0Qrp2yWt4BMOeEToZR5rA6v5suUAMIBu8PRZIDkINXQMlIxHfGjZyNm0rVfw
7edNri966yus9OdzwPa32MIG3oC6PnVAwYCJAjjBMNS8sSIkp7wgHLkgWN4UFe2H
K/e6z8TLF4UQ+zFM0aGI5WZ+9QqWkTWEDF3R3OhdFpGrznna0gxmkOeV2YvtsgxY
cbS0vV9Zj73o+bYzgBKJsw/dAjyLdXoHUGvus26VLQ78S/VGunVKtItwoxBAYmZo
krW964qcC89YofzSi8RSKLHuEWtNWZbVm8YXr75u6jpr5GhMBu0CYefLs+BuZcxy
dw8c69cGneVbGZmY2J3rBhDkchbuICl8vdUPatGrOJAoaFdYKuw=
=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good. This
was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly
tricky and error-prone code.
There is a small merge conflict against a parisc cleanup, the
solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel. The
hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
There are some obvious conflicts against changes to the removed
files.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks.
-----BEGIN PGP SIGNATURE-----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=vtCN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
Whenever llc_ui_bind() and/or llc_ui_autobind()
took a reference on a netdevice but subsequently fail,
they must properly release their reference
or risk the infamous message from unregister_netdevice()
at device dismantle.
unregister_netdevice: waiting for eth0 to become free. Usage count = 3
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: 赵子轩 <beraphin@gmail.com>
Reported-by: Stoyan Manolov <smanolov@suse.de>
Link: https://lore.kernel.org/r/20220323004147.1990845-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure that no bridge masters are ever considered for MST info
dumping. MST states are only supported on bridge ports, not bridge
masters - which br_mst_info_size relies on.
Fixes: 122c29486e ("net: bridge: mst: Support setting and reporting MST port states")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Link: https://lore.kernel.org/r/20220322133001.16181-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DSA ports are stacked devices, so they use dev_mc_add() to sync their
address list to their lower interface (DSA master). But they are also
hardware devices, so they program those addresses to hardware using the
__dev_mc_add() sync and unsync callbacks.
Unfortunately both cannot work at the same time, and it seems that the
multicast addresses which are already present on the DSA master, like
33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes)
are synced to the master via dev_mc_sync(), but not to hardware by
__dev_mc_sync().
This happens because both the dev_mc_sync() -> __hw_addr_sync_one()
code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate
on the same variable: ha->sync_cnt, in a way that causes the "sync"
method (dsa_slave_sync_mc) to no longer be called.
To fix the issue we need to work with the API in the way in which it was
intended to be used, and therefore, call dev_uc_add() and friends for
each individual hardware address, from the sync and unsync callbacks.
Fixes: 5e8a1e03aa ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB")
Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() of all filesystems to alloc_inode_sb().
Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4]
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler build,
from the fast-headers tree - including placeholder *_api.h headers for
later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Z8uT
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler
build, from the fast-headers tree - including placeholder *_api.h
headers for later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per
node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
sched/headers: ARM needs asm/paravirt_api_clock.h too
sched/numa: Fix boot crash on arm64 systems
headers/prep: Fix header to build standalone: <linux/psi.h>
sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
cgroup: Fix suspicious rcu_dereference_check() usage warning
sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
sched/deadline,rt: Remove unused functions for !CONFIG_SMP
sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
sched/deadline: Remove unused def_dl_bandwidth
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
sched/tracing: Don't re-read p->state when emitting sched_switch event
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
sched/cpuacct: Remove redundant RCU read lock
sched/cpuacct: Optimize away RCU read lock
sched/cpuacct: Fix charge percpu cpuusage
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-03-21 v2
We've added 137 non-merge commits during the last 17 day(s) which contain
a total of 143 files changed, 7123 insertions(+), 1092 deletions(-).
The main changes are:
1) Custom SEC() handling in libbpf, from Andrii.
2) subskeleton support, from Delyan.
3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao.
4) Fix net.core.bpf_jit_harden race, from Hou.
5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub.
6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami.
The arch specific bits will come later.
7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri.
8) Enable non-atomic allocations in local storage, from Joanne.
9) Various var_off ptr_to_btf_id fixed, from Kumar.
10) bpf_ima_file_hash helper, from Roberto.
11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits)
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
bpftool: Fix a bug in subskeleton code generation
bpf: Fix bpf_prog_pack when PMU_SIZE is not defined
bpf: Fix bpf_prog_pack for multi-node setup
bpf: Fix warning for cast from restricted gfp_t in verifier
bpf, arm: Fix various typos in comments
libbpf: Close fd in bpf_object__reuse_map
bpftool: Fix print error when show bpf map
bpf: Fix kprobe_multi return probe backtrace
Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"
bpf: Simplify check in btf_parse_hdr()
selftests/bpf/test_lirc_mode2.sh: Exit with proper code
bpf: Check for NULL return from bpf_get_btf_vmlinux
selftests/bpf: Test skipping stacktrace
bpf: Adjust BPF stack helper functions to accommodate skip > 0
bpf: Select proper size for bpf_prog_pack
...
====================
Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- NFSv3 support in NFSD is now always built
- Added NFSD support for the NFSv4 birth-time file attribute
- Added support for storing and displaying sockaddrs in trace points
- NFSD now recognizes RPC_AUTH_TLS probes
Performance improvements:
- Optimized the svc transport enqueuing mechanism
- Added micro-optimizations for the duplicate reply cache
Notable bug fixes:
- Allocation of the NFSD file cache hash table is more reliable
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmI3XNkACgkQM2qzM29m
f5dNERAAqJ/nzfVp2H5BKLszJ7p/s13wFqbW719Rzymzl6/tUUHOqIsVdBsJsa/b
BdZQLLDwa6ZB5zOAnC6FosRKYu4lwixOOf94pC6a9ZDD/glYVKF8mZG+RZXPAy16
g3JUOi/bcyHXv0ZUhbv7DqW+HHM+owPP4vlNJ9ChiiLr/Xdp8NBKj+4Qtn/wcAo+
Xuvx7fU/5Mbemh+dd5mWker4afHvpt9V6U6s04m5LiTPPnHVnxmeyekJGUCOY0QO
cm/6SPNDqyn/VEfM/SRxEnLE9QcHRhZo/4PKRGF4wYolcviIogbILE1M7Ig/r/Gv
6Du2kcRAhyZ3zgWnu799Ivn3Q6IrVjxZwqmsi7YHURTwYKyZtxYsUk0MCBcpnxrE
WyTS2onpElbMop3viKCnQdpIetbsHnUNg3udUV6ugbdCbnZuhUw5B/d6x0o8ZWDE
C0f+jnX+GnBstn0vkcj2H0+VQTd5hUJtXMrooI42ODJoboQRZcmePwoXjqCmw3sy
PXTxLZC/5+4zNHGUuz4Pq4V7FKr4nHhDzaW4ZDO3mILx4ahceotulY1B/yoBUu8o
/LAhu2kJ6nFQkmpzdrGzPeOstgJYHm9CaitRvMzg+NJxEAJdebypdQDbX5iNpgfW
MDXH4n8eIqroTlQ/mQYEV0EbC7BaTqSCL6rQdcrcFUPu9n4Fcno=
=5nac
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"New features:
- NFSv3 support in NFSD is now always built
- Added NFSD support for the NFSv4 birth-time file attribute
- Added support for storing and displaying sockaddrs in trace points
- NFSD now recognizes RPC_AUTH_TLS probes
Performance improvements:
- Optimized the svc transport enqueuing mechanism
- Added micro-optimizations for the duplicate reply cache
Notable bug fixes:
- Allocation of the NFSD file cache hash table is more reliable"
* tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (30 commits)
nfsd: fix using the correct variable for sizeof()
nfsd: use correct format characters
NFSD: prevent integer overflow on 32 bit systems
NFSD: prevent underflow in nfssvc_decode_writeargs()
fs/lock: documentation cleanup. Replace inode->i_lock with flc_lock.
NFSD: Fix nfsd_breaker_owns_lease() return values
NFSD: Clean up _lm_ operation names
arch: Remove references to CONFIG_NFSD_V3 in the default configs
NFSD: Remove CONFIG_NFSD_V3
nfsd: more robust allocation failure handling in nfsd_file_cache_init
SUNRPC: Teach server to recognize RPC_AUTH_TLS
NFSD: Move svc_serv_ops::svo_function into struct svc_serv
NFSD: Remove svc_serv_ops::svo_module
SUNRPC: Remove svc_shutdown_net()
SUNRPC: Rename svc_close_xprt()
SUNRPC: Rename svc_create_xprt()
SUNRPC: Remove svo_shutdown method
SUNRPC: Merge svc_do_enqueue_xprt() into svc_enqueue_xprt()
SUNRPC: Remove the .svo_enqueue_xprt method
SUNRPC: Record endpoint information in trace log
...
In the timer callback function tipc_sk_timeout(), we're trying to
reschedule another timeout to retransmit a setup request if destination
link is congested. But we use the incorrect timeout value
(msecs_to_jiffies(100)) instead of (jiffies + msecs_to_jiffies(100)),
so that the timer expires immediately, it's irrelevant for original
description.
In this commit we correct the timeout value in sk_reset_timer()
Fixes: 6787927475 ("tipc: buffer overflow handling in listener socket")
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20220321042229.314288-1-hoang.h.le@dektech.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DSA probing is atypical because a tree of devices must probe all at
once, so out of N switches which call dsa_tree_setup_routing_table()
during probe, for (N - 1) of them, "complete" will return false and they
will exit probing early. The Nth switch will set up the whole tree on
their behalf.
The implication is that for (N - 1) switches, the driver binds to the
device successfully, without doing anything. When the driver is bound,
the ->shutdown() method may run. But if the Nth switch has failed to
initialize the tree, there is nothing to do for the (N - 1) driver
instances, since the slave devices have not been created, etc. Moreover,
dsa_switch_shutdown() expects that the calling @ds has been in fact
initialized, so it jumps at dereferencing the various data structures,
which is incorrect.
Avoid the ensuing NULL pointer dereferences by simply checking whether
the Nth switch has previously set "ds->setup = true" for the switch
which is currently shutting down. The entire setup is serialized under
dsa2_mutex which we already hold.
Fixes: 0650bf52b3 ("net: dsa: be compatible with masters which unregister on shutdown")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220318195443.275026-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During NAT, a tuple collision may occur. When this happens, openvswitch
will make a second pass through NAT which will perform additional packet
modification. This will update the skb data, but not the flow key that
OVS uses. This means that future flow lookups, and packet matches will
have incorrect data. This has been supported since
5d50aa83e2 ("openvswitch: support asymmetric conntrack").
That commit failed to properly update the sw_flow_key attributes, since
it only called the ovs_ct_nat_update_key once, rather than each time
ovs_ct_nat_execute was called. As these two operations are linked, the
ovs_ct_nat_execute() function should always make sure that the
sw_flow_key is updated after a successful call through NAT infrastructure.
Fixes: 5d50aa83e2 ("openvswitch: support asymmetric conntrack")
Cc: Dumitru Ceara <dceara@redhat.com>
Cc: Numan Siddique <nusiddiq@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220318124319.3056455-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5E1v
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got a number of SELinux patches queued up, the highlights are:
- Fixup the security_fs_context_parse_param() LSM hook so it executes
all of the LSM hook implementations unless a serious error occurs.
We also correct the SELinux hook implementation so that it returns
zero on success.
- In addition to a few SELinux mount option parsing fixes, we
simplified the parsing by moving it earlier in the process.
The logic was that it was unlikely an admin/user would use the new
mount API and not have the policy loaded before passing the SELinux
options.
- Properly fixed the LSM/SELinux/SCTP hooks with the addition of the
security_sctp_assoc_established() hook.
This work was done in conjunction with the netdev folks and should
complete the move of the SCTP labeling from the endpoints to the
associations.
- Fixed a variety of sparse warnings caused by changes in the "__rcu"
markings of some core kernel structures.
- Ensure we access the superblock's LSM security blob using the
stacking-safe accessors.
- Added the ability for the kernel to always allow FIOCLEX and
FIONCLEX if the "ioctl_skip_cloexec" policy capability is
specified.
- Various constifications improvements, type casting improvements,
additional return value checks, and dead code/parameter removal.
- Documentation fixes"
* tag 'selinux-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (23 commits)
selinux: shorten the policy capability enum names
docs: fix 'make htmldocs' warning in SCTP.rst
selinux: allow FIOCLEX and FIONCLEX with policy capability
selinux: use correct type for context length
selinux: drop return statement at end of void functions
security: implement sctp_assoc_established hook in selinux
security: add sctp_assoc_established hook
selinux: parse contexts for mount options early
selinux: various sparse fixes
selinux: try to use preparsed sid before calling parse_sid()
selinux: Fix selinux_sb_mnt_opts_compat()
LSM: general protection fault in legacy_parse_param
selinux: fix a type cast problem in cred_init_security()
selinux: drop unused macro
selinux: simplify cred_init_security
selinux: do not discard const qualifier in cast
selinux: drop unused parameter of avtab_insert_node
selinux: drop cast to same type
selinux: enclose macro arguments in parenthesis
selinux: declare name parameter of hash_eval const
...
It is known that priority setting HW offload when set tls TX/RX offload
by setsockopt(). Check netdevice whether support NETIF_F_HW_TLS_TX or
not at the later stages in the whole tls_set_device_offload() process,
some memory allocations have been done before that. We must release those
memory and return error if we judge the netdevice not support
NETIF_F_HW_TLS_TX. It is redundant.
Move NETIF_F_HW_TLS_TX judgement forward, and move start_marker_record
and offload_ctx memory allocation back slightly. Thus, we can get
simpler exception handling process.
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid using "goto" jump instruction unconditionally when we
can return directly. Remove unnecessary jump instructions in
do_tls_setsockopt_conf().
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tp->rx_opt.mss_clamp is not populated, yet, during TFO send so we
rise it to the local MSS. tp->mss_cache is not updated, however:
tcp_v6_connect():
tp->rx_opt.mss_clamp = IPV6_MIN_MTU - headers;
tcp_connect():
tcp_connect_init():
tp->mss_cache = min(mtu, tp->rx_opt.mss_clamp)
tcp_send_syn_data():
tp->rx_opt.mss_clamp = tp->advmss
After recent fixes to ICMPv6 PTB handling we started dropping
PMTU updates higher than tp->mss_cache. Because of the stale
tp->mss_cache value PMTU updates during TFO are always dropped.
Thanks to Wei for helping zero in on the problem and the fix!
Fixes: c7bb4b8903 ("ipv6: tcp: drop silly ICMPv6 packet too big messages")
Reported-by: Andre Nash <alnash@fb.com>
Reported-by: Neil Spring <ntspring@fb.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220321165957.1769954-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lockdep annotation lockdep_assert_softirq_will_run() expects that
either hard or soft interrupts are disabled because both guaranty that
the "raised" soft-interrupts will be processed once the context is left.
This triggers in flush_smp_call_function_from_idle() but it this case it
explicitly calls do_softirq() in case of pending softirqs.
Revert the "softirq will run" annotation in ____napi_schedule() and move
the check back to __netif_rx() as it was. Keep the IRQ-off assert in
____napi_schedule() because this is always required.
Fixes: fbd9a2ceba ("net: Add lockdep asserts to ____napi_schedule().")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/YjhD3ZKWysyw8rc6@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the devlink core hold the instance lock during eswitch_mode
callbacks. Cheat in case of mlx5 (see the cover letter).
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'll need an explicitly locked rate node API for netdevsim
to switch eswitch mode setting to locked.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next.
This patchset contains updates for the nf_tables register tracking
infrastructure, disable bogus warning when attaching ct helpers,
one namespace pollution fix and few cleanups for the flowtable.
1) Revisit conntrack gc routine to reduce chances of overruning
the netlink buffer from the event path. From Florian Westphal.
2) Disable warning on explicit ct helper assignment, from Phil Sutter.
3) Read-only expressions do not update registers, mark them as
NFT_REDUCE_READONLY. Add helper functions to update the register
tracking information. This patch re-enables the register tracking
infrastructure.
4) Cancel register tracking in case an expression fully/partially
clobbers existing data.
5) Add register tracking support for remaining expressions: ct,
lookup, meta, numgen, osf, hash, immediate, socket, xfrm, tunnel,
fib, exthdr.
6) Rename init and exit functions for the conntrack h323 helper,
from Randy Dunlap.
7) Remove redundant field in struct flow_offload_work.
8) Update nf_flow_table_iterate() to pass flowtable to callback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In calipso_map_cat_ntoh(), in the for loop, if the return value of
netlbl_bitmap_walk() is equal to (net_clen_bits - 1), when
netlbl_bitmap_walk() is called next time, out-of-bounds memory accesses
of bitmap[byte_offset] occurs.
The bug was found during fuzzing. The following is the fuzzing report
BUG: KASAN: slab-out-of-bounds in netlbl_bitmap_walk+0x3c/0xd0
Read of size 1 at addr ffffff8107bf6f70 by task err_OH/252
CPU: 7 PID: 252 Comm: err_OH Not tainted 5.17.0-rc7+ #17
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x21c/0x230
show_stack+0x1c/0x60
dump_stack_lvl+0x64/0x7c
print_address_description.constprop.0+0x70/0x2d0
__kasan_report+0x158/0x16c
kasan_report+0x74/0x120
__asan_load1+0x80/0xa0
netlbl_bitmap_walk+0x3c/0xd0
calipso_opt_getattr+0x1a8/0x230
calipso_sock_getattr+0x218/0x340
calipso_sock_getattr+0x44/0x60
netlbl_sock_getattr+0x44/0x80
selinux_netlbl_socket_setsockopt+0x138/0x170
selinux_socket_setsockopt+0x4c/0x60
security_socket_setsockopt+0x4c/0x90
__sys_setsockopt+0xbc/0x2b0
__arm64_sys_setsockopt+0x6c/0x84
invoke_syscall+0x64/0x190
el0_svc_common.constprop.0+0x88/0x200
do_el0_svc+0x88/0xa0
el0_svc+0x128/0x1b0
el0t_64_sync_handler+0x9c/0x120
el0t_64_sync+0x16c/0x170
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous commit 7ec02f5ac8 ("ax25: fix NPD bug in ax25_disconnect")
move ax25_disconnect into lock_sock() in order to prevent NPD bugs. But
there are race conditions that may lead to null pointer dereferences in
ax25_heartbeat_expiry(), ax25_t1timer_expiry(), ax25_t2timer_expiry(),
ax25_t3timer_expiry() and ax25_idletimer_expiry(), when we use
ax25_kill_by_device() to detach the ax25 device.
One of the race conditions that cause null pointer dereferences can be
shown as below:
(Thread 1) | (Thread 2)
ax25_connect() |
ax25_std_establish_data_link() |
ax25_start_t1timer() |
mod_timer(&ax25->t1timer,..) |
| ax25_kill_by_device()
(wait a time) | ...
| s->ax25_dev = NULL; //(1)
ax25_t1timer_expiry() |
ax25->ax25_dev->values[..] //(2)| ...
... |
We set null to ax25_cb->ax25_dev in position (1) and dereference
the null pointer in position (2).
The corresponding fail log is shown below:
===============================================================
BUG: kernel NULL pointer dereference, address: 0000000000000050
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc6-00794-g45690b7d0
RIP: 0010:ax25_t1timer_expiry+0x12/0x40
...
Call Trace:
call_timer_fn+0x21/0x120
__run_timers.part.0+0x1ca/0x250
run_timer_softirq+0x2c/0x60
__do_softirq+0xef/0x2f3
irq_exit_rcu+0xb6/0x100
sysvec_apic_timer_interrupt+0xa2/0xd0
...
This patch moves ax25_disconnect() before s->ax25_dev = NULL
and uses del_timer_sync() to delete timers in ax25_disconnect().
If ax25_disconnect() is called by ax25_kill_by_device() or
ax25->ax25_dev is NULL, the reason in ax25_disconnect() will be
equal to ENETUNREACH, it will wait all timers to stop before we
set null to s->ax25_dev in ax25_kill_by_device().
Fixes: 7ec02f5ac8 ("ax25: fix NPD bug in ax25_disconnect")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous commit d01ffb9eee ("ax25: add refcount in ax25_dev to
avoid UAF bugs") and commit feef318c85 ("ax25: fix UAF bugs of
net_device caused by rebinding operation") increase the refcounts of
ax25_dev and net_device in ax25_bind() and decrease the matching refcounts
in ax25_kill_by_device() in order to prevent UAF bugs, but there are
reference count leaks.
The root cause of refcount leaks is shown below:
(Thread 1) | (Thread 2)
ax25_bind() |
... |
ax25_addr_ax25dev() |
ax25_dev_hold() //(1) |
... |
dev_hold_track() //(2) |
... | ax25_destroy_socket()
| ax25_cb_del()
| ...
| hlist_del_init() //(3)
|
|
(Thread 3) |
ax25_kill_by_device() |
... |
ax25_for_each(s, &ax25_list) { |
if (s->ax25_dev == ax25_dev) //(4) |
... |
Firstly, we use ax25_bind() to increase the refcount of ax25_dev in
position (1) and increase the refcount of net_device in position (2).
Then, we use ax25_cb_del() invoked by ax25_destroy_socket() to delete
ax25_cb in hlist in position (3) before calling ax25_kill_by_device().
Finally, the decrements of refcounts in ax25_kill_by_device() will not
be executed, because no s->ax25_dev equals to ax25_dev in position (4).
This patch adds decrements of refcounts in ax25_release() and use
lock_sock() to do synchronization. If refcounts decrease in ax25_release(),
the decrements of refcounts in ax25_kill_by_device() will not be
executed and vice versa.
Fixes: d01ffb9eee ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Fixes: 87563a043c ("ax25: fix reference count leaks of ax25_dev")
Fixes: feef318c85 ("ax25: fix UAF bugs of net_device caused by rebinding operation")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_DEBUG_INFO_BTF is disabled, bpf_get_btf_vmlinux can return a
NULL pointer. Check for it in btf_get_module_btf to prevent a NULL pointer
dereference.
While kernel test robot only complained about this specific case, let's
also check for NULL in other call sites of bpf_get_btf_vmlinux.
Fixes: 9492450fd2 ("bpf: Always raise reference in btf_get_module_btf")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220320143003.589540-1-memxor@gmail.com
In commit 9a69e2b385 ("bpf: Make remote_port field in struct
bpf_sk_lookup 16-bit wide") the remote_port field has been split up and
re-declared from u32 to be16.
However, the accompanying changes to the context access converter have not
been well thought through when it comes big-endian platforms.
Today 2-byte wide loads from offsetof(struct bpf_sk_lookup, remote_port)
are handled as narrow loads from a 4-byte wide field.
This by itself is not enough to create a problem, but when we combine
1. 32-bit wide access to ->remote_port backed by a 16-wide wide load, with
2. inherent difference between litte- and big-endian in how narrow loads
need have to be handled (see bpf_ctx_narrow_access_offset),
we get inconsistent results for a 2-byte loads from &ctx->remote_port on LE
and BE architectures. This in turn makes BPF C code for the common case of
2-byte load from ctx->remote_port not portable.
To rectify it, inform the context access converter that remote_port is
2-byte wide field, and only 1-byte loads need to be treated as narrow
loads.
At the same time, we special-case the 4-byte load from &ctx->remote_port to
continue handling it the same way as do today, in order to keep the
existing BPF programs working.
Fixes: 9a69e2b385 ("bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220319183356.233666-2-jakub@cloudflare.com
Currently, local storage memory can only be allocated atomically
(GFP_ATOMIC). This restriction is too strict for sleepable bpf
programs.
In this patch, the verifier detects whether the program is sleepable,
and passes the corresponding GFP_KERNEL or GFP_ATOMIC flag as a
5th argument to bpf_task/sk/inode_storage_get. This flag will propagate
down to the local storage functions that allocate memory.
Please note that bpf_task/sk/inode_storage_update_elem functions are
invoked by userspace applications through syscalls. Preemption is
disabled before bpf_task/sk/inode_storage_update_elem is called, which
means they will always have to allocate memory atomically.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220318045553.3091807-2-joannekoong@fb.com
The flowtable object is already passed as argument to
nf_flow_table_iterate(), do use not data pointer to pass flowtable.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
Example 1: (System.map)
ffffffff832fc78c t init
ffffffff832fc79e t init
ffffffff832fc8f8 t init
Example 2: (initcall_debug log)
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 15 usecs
calling init+0x0/0x60 @ 1
initcall init+0x0/0x60 returned 0 after 2 usecs
calling init+0x0/0x9a @ 1
initcall init+0x0/0x9a returned 0 after 74 usecs
Fixes: f587de0e2f ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check if we can elide the load. Cancel if the new candidate
isn't identical to previous store.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The fib expression stores to a register, so we can't add empty stub.
Check that the register that is being written is in fact redundant.
In most cases, this is expected to cancel tracking as re-use is
unlikely.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check if the destination register already contains the data that this
tunnel expression performs. This allows to skip this redundant operation.
If the destination contains a different selector, update the register
tracking information. This patch does not perform bitwise tracking.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check if the destination register already contains the data that this
xfrm expression performs. This allows to skip this redundant operation.
If the destination contains a different selector, update the register
tracking information.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check if the destination register already contains the data that this
socket expression performs. This allows to skip this redundant
operation. If the destination contains a different selector, update the
register tracking information.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The immediate expression might clobber existing data on the registers,
cancel register tracking for the destination register.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check if the destination register already contains the data that this
osf expression performs. Always cancel register tracking for jhash since
this requires tracking multiple source registers in case of
concatenations. Perform register tracking (without bitwise) for symhash
since input does not come from source register.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Allow to recycle the previous output of the OS fingerprint expression
if flags and ttl are the same.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Random and increment are stateful, each invocation results in fresh output.
Cancel register tracking for these two expressions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
its enough to export the meta get reduce helper and then call it
from nft_meta_bridge too.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In most cases, nft_lookup will be read-only, i.e. won't clobber
registers. In case of map, we need to cancel the registers that will
see stores.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check if the destination register already contains the data that this ct
expression performs. This allows to skip this redundant operation. If
the destination contains a different selector, update the register
tracking information.
Export nft_expr_reduce_bitwise as a symbol since nft_ct might be
compiled as a module.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Output of expressions might be larger than one single register, this might
clobber existing data. Reset tracking for all destination registers that
required to store the expression output.
This patch adds three new helper functions:
- nft_reg_track_update: cancel previous register tracking and update it.
- nft_reg_track_cancel: cancel any previous register tracking info.
- __nft_reg_track_cancel: cancel only one single register tracking info.
Partial register clobbering detection is also supported by checking the
.num_reg field which describes the number of register that are used.
This patch updates the following expressions:
- meta_bridge
- bitwise
- byteorder
- meta
- payload
to use these helper functions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Skip register tracking for expressions that perform read-only operations
on the registers. Define and use a cookie pointer NFT_REDUCE_READONLY to
avoid defining stubs for these expressions.
This patch re-enables register tracking which was disabled in ed5f85d422
("netfilter: nf_tables: disable register tracking"). Follow up patches
add remaining register tracking for existing expressions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The function sets the pernet boolean to avoid the spurious warning from
nf_ct_lookup_helper() when assigning conntrack helpers via nftables.
Fixes: 1a64edf54f ("netfilter: nft_ct: add helper set support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
as of commit 4608fdfc07
("netfilter: conntrack: collect all entries in one cycle")
conntrack gc was changed to run every 2 minutes.
On systems where conntrack hash table is set to large value, most evictions
happen from gc worker rather than the packet path due to hash table
distribution.
This causes netlink event overflows when events are collected.
This change collects average expiry of scanned entries and
reschedules to the average remaining value, within 1 to 60 second interval.
To avoid event overflows, reschedule after each bucket and add a
limit for both run time and number of evictions per run.
If more entries have to be evicted, reschedule and restart 1 jiffy
into the future.
Reported-by: Karel Rericha <karel@maxtel.cz>
Cc: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-03-19
1) Delete duplicated functions that calls same xfrm_api_check.
From Leon Romanovsky.
2) Align userland API of the default policy structure to the
internal structures. From Nicolas Dichtel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When a netlink message is received, netlink_recvmsg() fills in the address
of the sender. One of the fields is the 32-bit bitfield nl_groups, which
carries the multicast group on which the message was received. The least
significant bit corresponds to group 1, and therefore the highest group
that the field can represent is 32. Above that, the UB sanitizer flags the
out-of-bounds shift attempts.
Which bits end up being set in such case is implementation defined, but
it's either going to be a wrong non-zero value, or zero, which is at least
not misleading. Make the latter choice deterministic by always setting to 0
for higher-numbered multicast groups.
To get information about membership in groups >= 32, userspace is expected
to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO
socket option.
[0] https://lwn.net/Articles/147608/
The way to trigger this issue is e.g. through monitoring the BRVLAN group:
# bridge monitor vlan &
# ip link add name br type bridge
Which produces the following citation:
UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19
shift exponent 32 is too large for 32-bit type 'int'
Fixes: f7fa9b10ed ("[NETLINK]: Support dynamic number of multicast groups per netlink family")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/2bef6aabf201d1fc16cca139a744700cff9dcb04.1647527635.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds
Jakub Kicinski
Eric Dumazet
Tobias Waldekranz
Vladimir Oltean
Muchun Song
Hoang Le
Aaron Conole
Ziyang Xuan
Sebastian Andrzej Siewior
David S. Miller
Wang Yufen
Duoming Zhou
Kumar Kartikeya Dwivedi
Jakub Sitnicki
Joanne Koong
Pablo Neira Ayuso
Randy Dunlap
Florian Westphal
Phil Sutter
Petr Machata