Rework the I/O accounting for bio based drivers to use ->bi_bdev. This
means all drivers can now simply use bio_start_io_acct to start
accounting, and it will take partitions into account automatically. To
end I/O account either bio_end_io_acct can be used if the driver never
remaps I/O to a different device, or bio_end_io_acct_remapped if the
driver did remap the I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to reassign ->bi_bdev when remapping the
partition-relative block number to the device wide one, as all the
information required by the drivers comes from the gendisk anyway.
Keeping the original ->bi_bdev alive will allow to greatly simplify
the partition-away I/O accounting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge a few checks for whole devices vs partitions to streamline the
sanity checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change the policy so that a BLKROSET on the whole device also affects
partitions. To quote Martin K. Petersen:
It's very common for database folks to twiddle the read-only state of
block devices and partitions. I know that our users will find it very
counter-intuitive that setting /dev/sda read-only won't prevent writes
to /dev/sda1.
The existing behavior is inconsistent in the sense that doing:
# blockdev --setro /dev/sda
# echo foo > /dev/sda1
permits writes. But:
# blockdev --setro /dev/sda
<something triggers revalidate>
# echo foo > /dev/sda1
doesn't.
And a subsequent:
# blockdev --setrw /dev/sda
# echo foo > /dev/sda1
doesn't work either since sda1's read-only policy has been inherited
from the whole-disk device.
You need to do:
# blockdev --rereadpt
after setting the whole-disk device rw to effectuate the same change on
the partitions, otherwise they are stuck being read-only indefinitely.
However, setting the read-only policy on a partition does *not* require
the revalidate step. As a matter of fact, doing the revalidate will blow
away the policy setting you just made.
So the user needs to take different actions depending on whether they
are trying to read-protect a whole-disk device or a partition. Despite
using the same ioctl. That is really confusing.
I have lost count how many times our customers have had data clobbered
because of ambiguity of the existing whole-disk device policy. The
current behavior violates the principle of least surprise by letting the
user think they write protected the whole disk when they actually
didn't.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 20bd1d026a ("scsi: sd: Keep disk read-only when re-reading
partition") addressed a long-standing problem with user read-only
policy being overridden as a result of a device-initiated revalidate.
The commit has since been reverted due to a regression that left some
USB devices read-only indefinitely.
To fix the underlying problems with revalidate we need to keep track
of hardware state and user policy separately.
The gendisk has been updated to reflect the current hardware state set
by the device driver. This is done to allow returning the device to
the hardware state once the user clears the BLKROSET flag.
The resulting semantics are as follows:
- If BLKROSET sets a given partition read-only, that partition will
remain read-only even if the underlying storage stack initiates a
revalidate. However, the BLKRRPART ioctl will cause the partition
table to be dropped and any user policy on partitions will be lost.
- If BLKROSET has not been set, both the whole disk device and any
partitions will reflect the current write-protect state of the
underlying device.
Based on a patch from Martin K. Petersen <martin.petersen@oracle.com>.
Reported-by: Oleksii Kurochko <olkuroch@cisco.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201221
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only a single caller can end up in bdev_read_only, so move the check
there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=CClj
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Missing CRC32 selections (Arnd)
- Fix for a merge window regression with bdev inode init (Christoph)
- bcache fixes
- rnbd fixes
- NVMe pull request from Christoph:
- fix a race in the nvme-tcp send code (Sagi Grimberg)
- fix a list corruption in an nvme-rdma error path (Israel Rukshin)
- avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
- add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
- fix two compiler warnings in nvme-fcloop (James Smart)
- don't call sleeping functions from irq context in nvme-fc (James Smart)
- remove an unused argument (Max Gurtovoy)
- remove unused exports (Minwoo Im)
- Use-after-free fix for partition iteration (Ming)
- Missing blk-mq debugfs flag annotation (John)
- Bdev freeze regression fix (Satya)
- blk-iocost NULL pointer deref fix (Tejun)
* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
bcache: check unsupported feature sets for bcache register
bcache: fix typo from SUUP to SUPP in features.h
bcache: set pdev_set_uuid before scond loop iteration
blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
block/rnbd-clt: avoid module unload race with close confirmation
block/rnbd: Adding name to the Contributors List
block/rnbd-clt: Fix sg table use after free
block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
block/rnbd: Select SG_POOL for RNBD_CLIENT
block: pre-initialize struct block_device in bdev_alloc_inode
fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
nvme: remove the unused status argument from nvme_trace_bio_complete
nvmet-rdma: Fix list_del corruption on queue establishment failure
nvme: unexport functions with no external caller
nvme: avoid possible double fetch in handling CQE
nvme-tcp: Fix possible race of io_work and direct send
nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
...
Showing the hctx flags for when BLK_MQ_F_TAG_HCTX_SHARED is set gives
something like:
root@debian:/home/john# more /sys/kernel/debug/block/sda/hctx0/flags
alloc_policy=FIFO SHOULD_MERGE|TAG_QUEUE_SHARED|3
Add the decoding for that flag.
Fixes: 32bc15afed ("blk-mq: Facilitate a shared sbitmap per tagset")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure that bdgrab() is done on the 'block_device' instance before
referring to it for avoiding use-after-free.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+825f0f9657d4e528046e@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BFQ computes number of tags it allows to be allocated for each request type
based on tag bitmap. However it uses 1 << bitmap.shift as number of
available tags which is wrong. 'shift' is just an internal bitmap value
containing logarithm of how many bits bitmap uses in each bitmap word.
Thus number of tags allowed for some request types can be far to low.
Use proper bitmap.depth which has the number of tags instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When initializing iocost for a queue, its rqos should be registered before
the blkcg policy is activated to allow policy data initiailization to lookup
the associated ioc. This unfortunately means that the rqos methods can be
called on bios before iocgs are attached to all existing blkgs.
While the race is theoretically possible on ioc_rqos_throttle(), it mostly
happened in ioc_rqos_merge() due to the difference in how they lookup ioc.
The former determines it from the passed in @rqos and then bails before
dereferencing iocg if the looked up ioc is disabled, which most likely is
the case if initialization is still in progress. The latter looked up ioc by
dereferencing the possibly NULL iocg making it a lot more prone to actually
triggering the bug.
* Make ioc_rqos_merge() use the same method as ioc_rqos_throttle() to look
up ioc for consistency.
* Make ioc_rqos_throttle() and ioc_rqos_merge() test for NULL iocg before
dereferencing it.
* Explain the danger of NULL iocgs in blk_iocost_init().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jonathan Lemon <bsd@fb.com>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big
core two fixes are for power management ("block: Do not accept any
requests while suspended" and "block: Fix a race in the runtime power
management code") which finally sorts out the resume problems we've
occasionally been having. To make the resume fix, there are seven
necessary precursors which effectively renames REQ_PREEMPT to REQ_PM,
so every "special" request in block is automatically a power
management exempt one. All of the non-PM preempt cases are removed
except for the one in the SCSI Parallel Interface (spi) domain
validation which is a genuine case where we have to run requests at
high priority to validate the bus so this becomes an autopm get/put
protected request.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX+98LyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYvLAP9K+HBT
Lrkt3VWc9gq6F36+QH/SeW8IyXGaj77ysFHXxwD/UambRjRK8IA24mvf9sWeLLj6
p8CqCHUkCXqP48IiymE=
=NHrx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
This was missed in 021a24460d. Leads to the numeric value of
QUEUE_FLAG_NOWAIT (i.e. 29) showing up in
/sys/kernel/debug/block/*/state.
Fixes: 021a24460d
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update copyrights for files that have gotten some major rewrites lately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With force threaded interrupts enabled, raising softirq from an SMP
function call will always result in waking the ksoftirqd thread. This is
not optimal given that the thread runs at SCHED_OTHER priority.
Completing the request in hard IRQ-context on PREEMPT_RT (which enforces
the force threaded mode) is bad because the completion handler may
acquire sleeping locks which violate the locking context.
Disable request completing on a remote CPU in force threaded mode.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It will be helpful to trace the iocg's whole state, including active and
idle state. And we can easily expand the original iocost_iocg_activate
trace event to support a state trace class, including active and idle
state tracing.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's guaranteed that no request is in flight when a hctx is going
offline. This warning is only triggered when the wq's CPU is hot
plugged and the blk-mq is not synced up yet.
As this state is temporary and the request is still processed
correctly, better remove the warning as this is the fast path.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This series consists of the usual driver updates (ufs, qla2xxx,
smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
cleanups, a major power management rework and a load of assorted minor
updates. There are a few core updates (formatting fixes being the big
one) but nothing major this cycle.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
hwhOv6Uto89gLCWSEz8=
=KUPT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/XgdYQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjTBD/4me2TNvGOogbcL0b1leAotndJ7spI/IcFM
NUMNy3pOGuRBcRjwle85xq44puAjlNkZE2LLatem5sT7ZvS+8lPNnOIoTYgfaCjt
PhKx2sKlLumVm3BwymYAPcPtke4fikGG15Mwu5nX1oOehmyGrjObGAr3Lo6gexCT
tQoCOczVqaTsV+iTXrLlmgEgs07J9Tm93uh2cNR8Jgroxb8ivuWeUq4YgbV4kWk+
Y8XvOyVE/yba0vQf5/hHtWuVoC6RdELnqZ6NCkcP/EicdBecwk1GMJAej1S3zPS1
0BT7GSFTpm3YUHcygD6LRmRg4I/BmWDTDtMi84+jLat6VvSG1HwIm//qHiCJh3ku
SlvFZENIWAv5LP92x2vlR5Lt7uE3GK2V/5Pxt2fekyzCth6mzu+hLH4CBPQ3xgyd
E1JqIQ/ilbXstp+EYoivV5x8yltZQnKEZRopws0EOqj1LsmDPj9XT1wzE9RnB0o+
PWu/DNhQFhhcmP7Z8uLgPiKIVpyGs+vjxiJLlTtGDFTCy6M5JbcgzGkEkSmnybxH
7lSanjpLt1dWj85FBMc6fNtJkv2rBPfb4+j0d1kZ45Dzcr4umirGIh7wtCHcgc83
brmXSt29hlKHseSHMMuNWK8haXcgAE7gq9tD8GZ/kzM7+vkmLLxHJa22Qhq5rp4w
URPeaBaQJw==
=ayp2
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
-----BEGIN PGP SIGNATURE-----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=zo4w
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
- migrate_disable/enable() support which originates from the RT tree and
is now a prerequisite for the new preemptible kmap_local() API which aims
to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=Oz1V
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
Delay to wait for queue running is milli second unit which is passed to
delayed work via msecs_to_jiffies() which is to convert milliseconds to
jiffies.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update mis-named argument description of blk_mq_map_queue(). This patch
also updates description that argument to software queue percpu context.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
tagset->set is allocated from blk_mq_alloc_tag_set() rather than being
reallocated. This patch added a helper to make its meaning explicitly
which is to allocate rather than to reallocate.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_queue_enter() accepts BLK_MQ_REQ_PM requests independent of the runtime
power management state. Now that SCSI domain validation no longer depends
on this behavior, modify the behavior of blk_queue_enter() as follows:
- Do not accept any requests while suspended.
- Only process power management requests while suspending or resuming.
Submitting BLK_MQ_REQ_PM requests to a device that is runtime suspended
causes runtime-suspended devices not to resume as they should. The request
which should cause a runtime resume instead gets issued directly, without
resuming the device first. Of course the device can't handle it properly,
the I/O fails, and the device remains suspended.
The problem is fixed by checking that the queue's runtime-PM status isn't
RPM_SUSPENDED before allowing a request to be issued, and queuing a
runtime-resume request if it is. In particular, the inline
blk_pm_request_resume() routine is renamed blk_pm_resume_queue() and the
code is unified by merging the surrounding checks into the routine. If the
queue isn't set up for runtime PM, or there currently is no restriction on
allowed requests, the request is allowed. Likewise if the BLK_MQ_REQ_PM
flag is set and the status isn't RPM_SUSPENDED. Otherwise a runtime resume
is queued and the request is blocked until conditions are more suitable.
[ bvanassche: modified commit message and removed Cc: stable because
without the previous patches from this series this patch would break
parallel SCSI domain validation + introduced queue_rpm_status() ]
Link: https://lore.kernel.org/r/20201209052951.16136-9-bvanassche@acm.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-and-tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove flag RQF_PREEMPT and BLK_MQ_REQ_PREEMPT since these are no longer
used by any kernel code.
Link: https://lore.kernel.org/r/20201209052951.16136-8-bvanassche@acm.org
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce the BLK_MQ_REQ_PM flag. This flag makes the request allocation
functions set RQF_PM. This is the first step towards removing
BLK_MQ_REQ_PREEMPT.
Link: https://lore.kernel.org/r/20201209052951.16136-3-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Can Guo <cang@codeaurora.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With the current implementation the following race can happen:
* blk_pre_runtime_suspend() calls blk_freeze_queue_start() and
blk_mq_unfreeze_queue().
* blk_queue_enter() calls blk_queue_pm_only() and that function returns
true.
* blk_queue_enter() calls blk_pm_request_resume() and that function does
not call pm_request_resume() because the queue runtime status is
RPM_ACTIVE.
* blk_pre_runtime_suspend() changes the queue status into RPM_SUSPENDING.
Fix this race by changing the queue runtime status into RPM_SUSPENDING
before switching q_usage_counter to atomic mode.
Link: https://lore.kernel.org/r/20201209052951.16136-2-bvanassche@acm.org
Fixes: 986d413b7c ("blk-mq: Enable support for runtime power management")
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Co-developed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This reverts commit b3c6a59975.
Now we can avoid nvme-loop lockdep warning of 'lockdep possible recursive locking'
by nvme-loop's lock class, no need to apply dynamically allocated lock class key,
so revert commit b3c6a5997541("block: Fix a lockdep complaint triggered by request
queue flushing").
This way fixes horrible SCSI probe delay issue on megaraid_sas, and it is reported
the whole probe may take more than half an hour.
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reported-by: Qian Cai <cai@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
flush_end_io() may be called recursively from some driver, such as
nvme-loop, so lockdep may complain 'possible recursive locking'.
Commit b3c6a5997541("block: Fix a lockdep complaint triggered by
request queue flushing") tried to address this issue by assigning
dynamically allocated per-flush-queue lock class. This solution
adds synchronize_rcu() for each hctx's release handler, and causes
horrible SCSI MQ probe delay(more than half an hour on megaraid sas).
Add new API of blk_mq_hctx_set_fq_lock_class() for these drivers, so
we just need to use driver specific lock class for avoiding the
lockdep warning of 'possible recursive locking'.
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reported-by: Qian Cai <cai@redhat.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iopoll is initially for small size, latency sensitive IO. It doesn't
work well for big IO, especially when it needs to be split to multiple
bios. In this case, the returned cookie of __submit_bio_noacct_mq() is
indeed the cookie of the last split bio. The completion of *this* last
split bio done by iopoll doesn't mean the whole original bio has
completed. Callers of iopoll still need to wait for completion of other
split bios.
Besides bio splitting may cause more trouble for iopoll which isn't
supposed to be used in case of big IO.
iopoll for split bio may cause potential race if CPU migration happens
during bio submission. Since the returned cookie is that of the last
split bio, polling on the corresponding hardware queue doesn't help
complete other split bios, if these split bios are enqueued into
different hardware queues. Since interrupts are disabled for polling
queues, the completion of these other split bios depends on timeout
mechanism, thus causing a potential hang.
iopoll for split bio may also cause hang for sync polling. Currently
both the blkdev and iomap-based fs (ext4/xfs, etc) support sync polling
in direct IO routine. These routines will submit bio without REQ_NOWAIT
flag set, and then start sync polling in current process context. The
process may hang in blk_mq_get_tag() if the submitted bio has to be
split into multiple bios and can rapidly exhaust the queue depth. The
process are waiting for the completion of the previously allocated
requests, which should be reaped by the following polling, and thus
causing a deadlock.
To avoid these subtle trouble described above, just disable iopoll for
split bio and return BLK_QC_T_NONE in this case. The side effect is that
non-HIPRI IO also returns BLK_QC_T_NONE now. It should be acceptable
since the returned cookie is never used for non-HIPRI IO.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block device drivers do not have to call blk_queue_max_hw_sectors() to
set a limit on request size if the default limit BLK_SAFE_MAX_SECTORS
is acceptable. However, this limit (255 sectors) may not be aligned
to the device logical block size which cannot be used as is for a
request maximum size. This is the case for the null_blk device driver.
Modify blk_queue_max_hw_sectors() to make sure that the request size
limits specified by the max_hw_sectors and max_sectors queue limits
are always aligned to the device logical block size. Additionally, to
avoid introducing a dependence on the execution order of this function
with blk_queue_logical_block_size(), also modify
blk_queue_logical_block_size() to perform the same alignment when the
logical block size is set after max_hw_sectors.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improves the checks on the zones of a zoned block device done in
blk_revalidate_disk_zones() by making sure that the device report_zones
method did report at least one zone and that the zones reported exactly
cover the entire disk capacity, that is, that there are no missing zones
at the end of the disk sector range.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If blk_poll() is not going to spin (i.e. @spin=false), it also must not
sleep in hybrid polling, otherwise it might be pretty suprising for
users trying to do a quick check and expecting no-wait behaviour.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out the base vrate change code into a separate function
to fimplify the ioc_timer_fn().
No functional change.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out the iocgs' state check into a separate function to
simplify the ioc_timer_fn().
No functional change.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only use the hweight based usage ratio to calculate the new
hweight_inuse of the iocg to decide if this iocg can donate some
surplus vtime.
Thus move the usage ratio calculation to the correct place to
avoid unnecessary calculation for some vtime shortage iocgs.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=o4GN
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-12-05' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Single fix for an issue with chunk_sectors and stacked devices"
* tag 'block-5.10-2020-12-05' of git://git.kernel.dk/linux-block:
block: use gcd() to fix chunk_sectors limit stacking
Restores splitting in terms of varied per-target ti->max_io_len
rather than use block core's single stacked 'chunk_sectors' limit.
- Like DM crypt, update DM integrity to not use crypto drivers that
have CRYPTO_ALG_ALLOCATES_MEMORY set.
- Fix DM writecache target's argument parsing and status display.
- Remove needless BUG() from dm writecache's persistent_memory_claim()
- Remove old gcc workaround in DM cache target's block_div() for ARM
link errors now that gcc >= 4.9 is required.
- Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range.
- Remove old, and now frowned upon, BUG_ON(in_interrupt()) in
dm_table_event().
- Remove invalid sparse annotations from dm_prepare_ioctl() and
dm_unprepare_ioctl().
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl/KonYTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWgSJCACNYEndubrROJZL+FOUQixzZQiOfphw
9Brb/XbdXWXIv7F+JV85E6olOqz7JjTGrO91uD5kwHEtVhDx5zT/GCm+5FoBrLa/
FuTphPRWNimZSU1umJe2AG9hOiDpPJJUe/wwj3QkBH2TeEHwBHblB8BkRFzxnP+p
0dGybrQBMtrH3GO65YG7qaASeBPl1+G3mVHfzViyhk1uoZL1y9pKbzPK60TkHcsa
VCGTPke5Ri3hvd85hmpDcXmyxjxZfCA8Jc/DrQ+DDEwakHoJFwlSzP7fqwHnpKHT
RDL4iOID54SViSGqzNcxlGtr/EHyN9Mom2d4Nnb0cgsRG4woCeJWJZMM
=+o1m
-----END PGP SIGNATURE-----
Merge tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM's bio splitting changes that were made during v5.9. This
restores splitting in terms of varied per-target ti->max_io_len
rather than use block core's single stacked 'chunk_sectors' limit.
- Like DM crypt, update DM integrity to not use crypto drivers that
have CRYPTO_ALG_ALLOCATES_MEMORY set.
- Fix DM writecache target's argument parsing and status display.
- Remove needless BUG() from dm writecache's persistent_memory_claim()
- Remove old gcc workaround in DM cache target's block_div() for ARM
link errors now that gcc >= 4.9 is required.
- Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range.
- Remove old, and now frowned upon, BUG_ON(in_interrupt()) in
dm_table_event().
- Remove invalid sparse annotations from dm_prepare_ioctl() and
dm_unprepare_ioctl().
* tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: remove invalid sparse __acquires and __releases annotations
dm: fix double RCU unlock in dm_dax_zero_page_range() error path
dm: fix IO splitting
dm writecache: remove BUG() and fail gracefully instead
dm table: Remove BUG_ON(in_interrupt())
dm: fix bug with RCU locking in dm_blk_report_zones
Revert "dm cache: fix arm link errors with inline"
dm writecache: fix the maximum number of arguments
dm writecache: advance the number of arguments when reporting max_age
dm integrity: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY
Commit 882ec4e609 ("dm table: stack 'chunk_sectors' limit to account
for target-specific splitting") caused a couple regressions:
1) Using lcm_not_zero() when stacking chunk_sectors was a bug because
chunk_sectors must reflect the most limited of all devices in the
IO stack.
2) DM targets that set max_io_len but that do _not_ provide an
.iterate_devices method no longer had there IO split properly.
And commit 5091cdec56 ("dm: change max_io_len() to use
blk_max_size_offset()") also caused a regression where DM no longer
supported varied (per target) IO splitting. The implication being the
potential for severely reduced performance for IO stacks that use a DM
target like dm-cache to hide performance limitations of a slower
device (e.g. one that requires 4K IO splitting).
Coming full circle: Fix all these issues by discontinuing stacking
chunk_sectors up using ti->max_io_len in dm_calculate_queue_limits(),
add optional chunk_sectors override argument to blk_max_size_offset()
and update DM's max_io_len() to pass ti->max_io_len to its
blk_max_size_offset() call.
Passing in an optional chunk_sectors override to blk_max_size_offset()
allows for code reuse of block's centralized calculation for max IO
size based on provided offset and split boundary.
Fixes: 882ec4e609 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting")
Fixes: 5091cdec56 ("dm: change max_io_len() to use blk_max_size_offset()")
Cc: stable@vger.kernel.org
Reported-by: John Dorminy <jdorminy@redhat.com>
Reported-by: Bruce Johnston <bjohnsto@redhat.com>
Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
The request_queue can trivially be derived from the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The request_queue can trivially be derived from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The request_queue can trivially be derived from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block_bio_merge tracepoint class can be reused for most bio-based
tracepoints. For that it just needs to lose the superfluous q and rq
parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_throtl_update_limit_valid() will search for descendants to see if
'LIMIT_LOW' of bps/iops and READ/WRITE is nonzero. However, they're always
zero if CONFIG_BLK_DEV_THROTTLING_LOW is not set, furthermore, a lot of
time will be wasted to iterate descendants.
Thus do nothing in blk_throtl_update_limit_valid() in such situation.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The inflight of partition 0 doesn't include inflight IOs to all
sub-partitions, since currently mq calculates inflight of specific
partition by simply camparing the value of the partition pointer.
Thus the following case is possible:
$ cat /sys/block/vda/inflight
0 0
$ cat /sys/block/vda/vda1/inflight
0 128
While single queue device (on a previous version, e.g. v3.10) has no
this issue:
$cat /sys/block/sda/sda3/inflight
0 33
$cat /sys/block/sda/inflight
0 33
Partition 0 should be specially handled since it represents the whole
disk. This issue is introduced since commit bf0ddaba65 ("blk-mq: fix
sysfs inflight counter").
Besides, this patch can also fix the inflight statistics of part 0 in
/proc/diskstats. Before this patch, the inflight statistics of part 0
doesn't include that of sub partitions. (I have marked the 'inflight'
field with asterisk.)
$cat /proc/diskstats
259 0 nvme0n1 45974469 0 367814768 6445794 1 0 1 0 *0* 111062 6445794 0 0 0 0 0 0
259 2 nvme0n1p1 45974058 0 367797952 6445727 0 0 0 0 *33* 111001 6445727 0 0 0 0 0 0
This is introduced since commit f299b7c7a9 ("blk-mq: provide internal
in-flight variant").
Fixes: bf0ddaba65 ("blk-mq: fix sysfs inflight counter")
Fixes: f299b7c7a9 ("blk-mq: provide internal in-flight variant")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: adapt for 5.11 partition change]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__bio_for_each_bvec(), __bio_for_each_segment() and bio_copy_data_iter()
fall under conditions of bvec_iter_advance_single(), which is a faster
and slimmer version of bvec_iter_advance(). Add
bio_advance_iter_single() and convert them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can just dereference the point in struct gendisk instead. Also
remove the now unused export.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of having two structures that represent each block device with
different life time rules, merge them into a single one. This also
greatly simplifies the reference counting rules, as we can use the inode
reference count as the main reference count for the new struct
block_device, with the device model reference front ending it for device
model interaction.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch the partition iter infrastructure to iterate over block_device
references instead of hd_struct ones mostly used to get at the
block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device actually needed instead of looking it up using
bdget_disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device actually needed instead of the hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use the bd_partno field in struct block_device everywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use struct block_device to lookup partitions on a disk. This removes
all usage of struct hd_struct from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allocate hd_struct together with struct block_device to pre-load
the lifetime rule changes in preparation of merging the two structures.
Note that part0 was previously embedded into struct gendisk, but is
a separate allocation now, and already points to the block_device instead
of the hd_struct. The lifetime of struct gendisk is still controlled by
the struct device embedded in the part0 hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the policy field to struct block_device and rename it to the
more descriptive bd_read_only. Also turn the field into a bool as it
is used as such.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the make_it_fail flag to struct block_device an turn it into a bool
in preparation of killing struct hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the holder_dir field to struct block_device in preparation for
kill struct hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the partition_meta_info to struct block_device in preparation for
killing struct hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the start_sect field to struct block_device in preparation
of killing struct hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the dkstats and stamp field to struct block_device in preparation
of killing struct hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the hd_struct always has a block device attached to it, there is
no need for having two size field that just get out of sync.
Additionally the field in hd_struct did not use proper serialization,
possibly allowing for torn writes. By only using the block_device field
this problem also gets fixed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To simplify block device lookup and a few other upcoming areas, make sure
that we always have a struct block_device available for each disk and
each partition, and only find existing block devices in bdget. The only
downside of this is that each device and partition uses a little more
memory. The upside will be that a lot of code can be simplified.
With that all we need to look up the block device is to lookup the inode
and do a few sanity checks on the gendisk, instead of the separate lookup
for the gendisk. For blk-cgroup which wants to access a gendisk without
opening it, a new blkdev_{get,put}_no_open low-level interface is added
to replace the previous get_gendisk use.
Note that the change to look up block device directly instead of the two
step lookup using struct gendisk causes a subtile change in behavior:
accessing a non-existing partition on an existing block device can now
cause a call to request_module. That call is harmless, and in practice
no recent system will access these nodes as they aren't created by udev
and static /dev/ setups are unusual.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case). This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use put_device to put the device instead of poking into the internals
and using kobject_put.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call disk_part_iter_exit in disk_part_iter_next instead of duplicating
the functionality.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sector_t is now always a u64, so this check is not needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a preparation patch to have minimal block layer request bio
append functionality in the context of the NVMeOF Passthru driver which
falls in the fast path and doesn't need calls from blk_rq_append_bio().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
commit 22ada802ed ("block: use lcm_not_zero() when stacking
chunk_sectors") broke chunk_sectors limit stacking. chunk_sectors must
reflect the most limited of all devices in the IO stack.
Otherwise malformed IO may result. E.g.: prior to this fix,
->chunk_sectors = lcm_not_zero(8, 128) would result in
blk_max_size_offset() splitting IO at 128 sectors rather than the
required more restrictive 8 sectors.
And since commit 07d098e6bb ("block: allow 'chunk_sectors' to be
non-power-of-2") care must be taken to properly stack chunk_sectors to
be compatible with the possibility that a non-power-of-2 chunk_sectors
may be stacked. This is why gcd() is used instead of reverting back
to using min_not_zero().
Fixes: 22ada802ed ("block: use lcm_not_zero() when stacking chunk_sectors")
Fixes: 07d098e6bb ("block: allow 'chunk_sectors' to be non-power-of-2")
Reported-by: John Dorminy <jdorminy@redhat.com>
Reported-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: John Dorminy <jdorminy@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's unnecessary to call wbt_update_limits explicitly within wbt_init,
because it will be called in the following function wbt_queue_depth_changed.
Signed-off-by: Lei Chen <lennychen@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get rid of the __call_single_node union and cleanup the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
If there is only one keyslot, then blk_ksm_init() computes
slot_hashtable_size=1 and log_slot_ht_size=0. This causes
blk_ksm_find_keyslot() to crash later because it uses
hash_ptr(key, log_slot_ht_size) to find the hash bucket containing the
key, and hash_ptr() doesn't support the bits == 0 case.
Fix this by making the hash table always have at least 2 buckets.
Tested by running:
kvm-xfstests -c ext4 -g encrypt -m inlinecrypt \
-o blk-crypto-fallback.num_keyslots=1
Fixes: 1b26283970 ("block: Keyslot Manager for Inline Encryption")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The update_bdev argument is always set to true, so remove it. Also
rename the function to the slighly less verbose set_capacity_and_notify,
as propagating the disk size to the block device isn't really
revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch the comment to talk about __register_blkdev instead of
register_blkdev and document the new probe parameter.
Fixes: 3da1a61e7046 ("block: add an optional probe callback to major_names")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that bdev_map is only used for finding gendisks, we can use
a simple xarray instead of the regions tracking structure for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a callback to the major_names array that allows a driver to override
how to probe for dev_t that doesn't currently have a gendisk registered.
This will help separating the lookup of the gendisk by dev_t vs probe
action for a not currently registered dev_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of reusing the ranges in bdev_map, add a new helper that is
called if no ranges was found. This is a first step to unpeel and
eventually remove the complex ranges structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split the block_class_lock mutex into one each to protect bdev_map
and major_names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copy and paste the kobj_map functionality in the block code in preparation
for completely rewriting it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge three hidden gendisk checks into one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that all drivers that want to hook into setting or clearing the
read-only flag use the set_read_only method, this code can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new method to allow for driver-specific processing when setting or
clearing the block device read-only state. This allows to replace the
cumbersome and error-prone override of the whole ioctl implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BLKFLSBUF is entirely contained in the block core, and there is no
good reason to give the driver a hook into processing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
disk_get_part needs to be paired with a disk_put_part.
Cc: stable@vger.kernel.org
Fixes: ef45fe470e ("blk-cgroup: show global disk stats in root cgroup io.stat")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For avoiding use-after-free on flush request, we call its .end_io() from
both timeout code path and __blk_mq_end_request().
When flush request's ref doesn't drop to zero, it is still used, we
can't mark it as IDLE, so fix it by marking IDLE when its refcount drops
to zero really.
Fixes: 65ff5cd045 ("blk-mq: mark flush request as IDLE in flush_end_io()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return if the function ended up sending an uevent or not.
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_end_request() will use the block status returned from queue_rq() as
argument, except in one instance in blk_mq_dispatch_rq_list(), where the
generic BLK_STS_IOERR is used.
Link: https://lore.kernel.org/r/20200930080256.90964-2-hare@suse.de
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mark flush request as IDLE in its .end_io(), aligning it with how normal
requests behave. The flush request stays in in-flight tags if we're not
using an IO scheduler, so we need to change its state into IDLE.
Otherwise, we will hang in blk_mq_tagset_wait_completed_request() during
error recovery because flush the request state is kept as COMPLETED.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Chao Leng <lengchao@huawei.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the bio's size reaches max_append_sectors, bio_add_hw_page returns
0 then __bio_iov_append_get_pages returns -EINVAL. This is an expected
result of building a small enough bio not to be split in the IO path.
However, iov_iter is not advanced in this case, causing the same pages
are filled for the bio again and again.
Fix the case by properly advancing the iov_iter for already processed
pages.
Fixes: 0512a75b98 ("block: Introduce REQ_OP_ZONE_APPEND")
Cc: stable@vger.kernel.org # 5.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Similarly to commit 457e490f2b ("blkcg: allocate struct blkcg_gq
outside request queue spinlock"), blkg_create can also trigger
occasional -ENOMEM failures at the radix insertion because any
allocation inside blkg_create has to be non-blocking, making it more
likely to fail. This causes trouble for userspace tools trying to
configure io weights who need to deal with this condition.
This patch reduces the occurrence of -ENOMEMs on this path by preloading
the radix tree element on a GFP_KERNEL context, such that we guarantee
the later non-blocking insertion won't fail.
A similar solution exists in blkcg_init_queue for the same situation.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=dFJi
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- rdma error handling fixes (Chao Leng)
- fc error handling and reconnect fixes (James Smart)
- fix the qid displace when tracing ioctl command (Keith Busch)
- don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
- fix MTDT for passthru (Logan Gunthorpe)
- blacklist Write Same on more devices (Kai-Heng Feng)
- fix an uninitialized work struct (zhenwei pi)"
- lightnvm out-of-bounds fix (Colin)
- SG allocation leak fix (Doug)
- rnbd fixes (Gioh, Guoqing, Jack)
- zone error translation fixes (Keith)
- kerneldoc markup fix (Mauro)
- zram lockdep fix (Peter)
- Kill unused io_context members (Yufen)
- NUMA memory allocation cleanup (Xianting)
- NBD config wakeup fix (Xiubo)
* tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits)
block: blk-mq: fix a kernel-doc markup
nvme-fc: shorten reconnect delay if possible for FC
nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
nvme-fc: fix error loop in create_hw_io_queues
nvme-fc: fix io timeout to abort I/O
null_blk: use zone status for max active/open
nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
nvmet: cleanup nvmet_passthru_map_sg()
nvmet: limit passthru MTDS by BIO_MAX_PAGES
nvmet: fix uninitialized work for zero kato
nvme-pci: disable Write Zeroes on Sandisk Skyhawk
nvme: use queuedata for nvme_req_qid
nvme-rdma: fix crash due to incorrect cqe
nvme-rdma: fix crash when connect rejected
block: remove unused members for io_context
blk-mq: remove the calling of local_memory_node()
zram: Fix __zram_bvec_{read,write}() locking order
skd_main: remove unused including <linux/version.h>
sgl_alloc_order: fix memory leak
lightnvm: fix out-of-bounds write to array devices->info[]
...
We don't need to check whether the node is memoryless numa node before
calling allocator interface. SLUB(and SLAB,SLOB) relies on the page
allocator to pick a node. Page allocator should deal with memoryless
nodes just fine. It has zonelists constructed for each possible nodes.
And it will automatically fall back into a node which is closest to the
requested node. As long as __GFP_THISNODE is not enforced of course.
The code comments of kmem_cache_alloc_node() of SLAB also showed this:
* Fallback to other node is possible if __GFP_THISNODE is not set.
blk-mq code doesn't set __GFP_THISNODE, so we can remove the calling
of local_memory_node().
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix this warning:
./block/bio.c:1098: WARNING: Inline emphasis start-string without end-string.
The thing is that *iter is not a valid markup.
That seems to be a typo:
*iter -> @iter
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Using "@bio's parent" causes the following waring:
./block/bio.c:10: WARNING: Inline emphasis start-string without end-string.
The main problem here is that this would be converted into:
**bio**'s parent
By kernel-doc, which is not a valid notation. It would be
possible to use, instead, this kernel-doc markup:
``bio's`` parent
Yet, here, is probably simpler to just use an altenative language:
the parent of @bio
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
fix bio splitting for bios that were deferred to the worker thread
due to a DM device being suspended.
- Remove DM core's special handling of NVMe devices now that block
core has internalized efficiencies drivers previously needed to
be concerned about (via now removed direct_make_request).
- Fix request-based DM to not bounce through indirect dm_submit_bio;
instead have block core make direct call to blk_mq_submit_bio().
- Various DM core cleanups to simplify and improve code.
- Update DM cryot to not use drivers that set
CRYPTO_ALG_ALLOCATES_MEMORY.
- Fix DM raid's raid1 and raid10 discard limits for the purposes of
linux-stable. But then remove DM raid's discard limits settings now
that MD raid can efficiently handle large discards.
- A couple small cleanups across various targets.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl+Fx1gTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWk5iB/9pONYmtfQ5oBx4jg/PU8cVYYIfOtwS
ZtItFbw7T9bkHVZ8d4hDr5LTq898cADuRD5edlR82gDOcXkiJlb5PqU39RoOTVvF
Xz87sWzHdGAK7rdnCMAc2hiX3oQOje9o7NxGeGQ/uPaNU+U/vJS0AZtEAwltocBd
j9MGESddBC636Gzbg5C0c0frikXd0am6qp6SCYJNpP5I0G2beHk2YX5Jqt9c7zMk
8kyQend5b5RvkPNWTAjkVfWUsIjwYHh6MF48ZoGvD0X3lWjIBiwyxC0UX5hSXq63
kB+nqxbXcvQLEBtJuDZ2bjyvrwzCVLpmfgLgzxOOU8fI5Q2U0zpsPaa0
=6YDu
-----END PGP SIGNATURE-----
Merge tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Improve DM core's bio splitting to use blk_max_size_offset(). Also
fix bio splitting for bios that were deferred to the worker thread
due to a DM device being suspended.
- Remove DM core's special handling of NVMe devices now that block core
has internalized efficiencies drivers previously needed to be
concerned about (via now removed direct_make_request).
- Fix request-based DM to not bounce through indirect dm_submit_bio;
instead have block core make direct call to blk_mq_submit_bio().
- Various DM core cleanups to simplify and improve code.
- Update DM cryot to not use drivers that set
CRYPTO_ALG_ALLOCATES_MEMORY.
- Fix DM raid's raid1 and raid10 discard limits for the purposes of
linux-stable. But then remove DM raid's discard limits settings now
that MD raid can efficiently handle large discards.
- A couple small cleanups across various targets.
* tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix request-based DM to not bounce through indirect dm_submit_bio
dm: remove special-casing of bio-based immutable singleton target on NVMe
dm: export dm_copy_name_and_uuid
dm: fix comment in __dm_suspend()
dm: fold dm_process_bio() into dm_submit_bio()
dm: fix missing imposition of queue_limits from dm_wq_work() thread
dm snap persistent: simplify area_io()
dm thin metadata: Remove unused local variable when create thin and snap
dm raid: remove unnecessary discard limits for raid10
dm raid: fix discard limits for raid1 and raid10
dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY
dm: use dm_table_get_device_name() where appropriate in targets
dm table: make 'struct dm_table' definition accessible to all of DM core
dm: eliminate need for start_io_acct() forward declaration
dm: simplify __process_abnormal_io()
dm: push use of on-stack flush_bio down to __send_empty_flush()
dm: optimize max_io_len() by inlining max_io_len_target_boundary()
dm: push md->immutable_target optimization down to __process_bio()
dm: change max_io_len() to use blk_max_size_offset()
dm table: stack 'chunk_sectors' limit to account for target-specific splitting
A zoned device with limited resources to open or activate zones may
return an error when the host exceeds those limits. The same command may
be successful if retried later, but the host needs to wait for specific
zone states before it should expect a retry to succeed. Have the block
layer provide an appropriate status for these conditions so applications
can distinuguish this error for special handling.
Cc: linux-api@vger.kernel.org
Cc: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=xE9E
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates for 5.10.
A few SCSI updates in here too, in coordination with Martin as they
depend on core block changes for the shared tag bitmap.
This contains:
- NVMe pull requests via Christoph:
- fix keep alive timer modification (Amit Engel)
- order the PCI ID list more sensibly (Andy Shevchenko)
- cleanup the open by controller helper (Chaitanya Kulkarni)
- use an xarray for the CSE log lookup (Chaitanya Kulkarni)
- support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
- fix nvme_ns_report_zones (Christoph Hellwig)
- add a sanity check to nvmet-fc (James Smart)
- fix interrupt allocation when too many polled queues are
specified (Jeffle Xu)
- small nvmet-tcp optimization (Mark Wunderlich)
- fix a controller refcount leak on init failure (Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni)
- major refactoring of the scanning code (Christoph Hellwig)
- MD updates via Song:
- Bug fixes in bitmap code, from Zhao Heming
- Fix a work queue check, from Guoqing Jiang
- Fix raid5 oops with reshape, from Song Liu
- Clean up unused code, from Jason Yan
- Discard improvements, from Xiao Ni
- raid5/6 page offset support, from Yufen Yu
- Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
Hannes)
- null_blk open/active zone limit support (Niklas)
- Set of bcache updates (Coly, Dongsheng, Qinglang)"
* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
md/raid5: fix oops during stripe resizing
md/bitmap: fix memory leak of temporary bitmap
md: fix the checking of wrong work queue
md/bitmap: md_bitmap_get_counter returns wrong blocks
md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
md/raid0: remove unused function is_io_in_chunk_boundary()
nvme-core: remove extra condition for vwc
nvme-core: remove extra variable
nvme: remove nvme_identify_ns_list
nvme: refactor nvme_validate_ns
nvme: move nvme_validate_ns
nvme: query namespace identifiers before adding the namespace
nvme: revalidate zone bitmaps in nvme_update_ns_info
nvme: remove nvme_update_formats
nvme: update the known admin effects
nvme: set the queue limits in nvme_update_ns_info
nvme: remove the 0 lba_shift check in nvme_update_ns_info
nvme: clean up the check for too large logic block sizes
nvme: freeze the queue over ->lba_shift updates
nvme: factor out a nvme_configure_metadata helper
...
-----BEGIN PGP SIGNATURE-----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=LzyE
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
Pull compat iovec cleanups from Al Viro:
"Christoph's series around import_iovec() and compat variant thereof"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
security/keys: remove compat_keyctl_instantiate_key_iov
mm: remove compat_process_vm_{readv,writev}
fs: remove compat_sys_vmsplice
fs: remove the compat readv/writev syscalls
fs: remove various compat readv/writev helpers
iov_iter: transparently handle compat iovecs in import_iovec
iov_iter: refactor rw_copy_check_uvector and import_iovec
iov_iter: move rw_copy_check_uvector() into lib/iov_iter.c
compat.h: fix a spelling error in <linux/compat.h>
blk_exit_queue will free elevator_data, while blk_mq_run_work_fn
will access it. Move cancel of hctx->run_work to the front of
blk_exit_queue to avoid use-after-free.
Fixes: 1b97871b50 ("blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release")
Signed-off-by: Yang Yang <yang.yang@vivo.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit 923218f616 ("blk-mq: don't allocate driver tag upfront
for flush rq"), blk_mq_submit_bio() will call blk_insert_flush()
directly to handle flush request rather than blk_mq_sched_insert_request()
in the case of elevator.
Then, all flush request either have set RQF_FLUSH_SEQ flag when call
blk_mq_sched_insert_request(), or have inserted into hctx->dispatch.
So, remove the dead code path.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since whole elevator register is protectd by sysfs_lock, we
don't need extras 'has_elevator'. Just use q->elevator directly.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit b89f625e28 ("block: don't release queue's sysfs
lock during switching elevator"), whole elevator register and
unregister function are covered by sysfs_lock. So, remove wrong
comment and add lockdep assert.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have introduced helper function blk_mq_hctx_stopped() to test
BLK_MQ_S_STOPPED.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have defined common interface blk_queue_registered() to
test QUEUE_FLAG_REGISTERED. Just use it.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elv_support_iosched() will check queue_is_mq() for us. So, remove
the redundant check to clean code.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We will register debugfs for scheduler no matter whether it have
defined callback funciton .exit_sched. So, blk_mq_exit_sched()
is always needed to unregister debugfs. Also, q->elevator should
be set as NULL after exiting scheduler.
For now, since all register scheduler have defined .exit_sched,
it will not cause any actual problem. But It will be more reasonable
to do this change.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=THH6
-----END PGP SIGNATURE-----
Merge tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- NVMe controller error path reference fix (Chaitanya)
- Fix regression with IBM partitions on non-dasd devices (Christoph)
- Fix a missing clear in the compat CDROM packet structure (Peilin)"
* tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block:
partitions/ibm: fix non-DASD devices
nvme-core: put ctrl ref when module ref get fail
block/scsi-ioctl: Fix kernel-infoleak in scsi_put_cdrom_generic_arg()
syzbot is reporting unkillable task [1], for the caller is failing to
handle a corrupted filesystem image which attempts to access beyond
the end of the device. While we need to fix the caller, flooding the
console with handle_bad_sector() message is unlikely useful.
[1] https://syzkaller.appspot.com/bug?id=f1f49fb971d7a3e01bd8ab8cff2ff4572ccf3092
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The __throtl_de/enqueue_tg() functions are only be called by
throtl_de/enqueue_tg(), thus we can just open code them to
make code more readable.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The throtl_schedule_next_dispatch() will validate if the service queue
is empty before calling update_min_dispatch_time(), and the
update_min_dispatch_time() will call throtl_rb_first(), which will
validate service queue again.
Thus we can move the service queue validation out of the
throtl_rb_first() to remove the redundant validation in the fast path.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We should move the list operation after validation.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It can not scale up in throtl_adjusted_limit() if we set bps or iops is
1, which will cause IO hang when enable low limit. Thus we should treat
1 as a illegal value to avoid this issue.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The IO latency tracking is only for LOW limit, so we should add a
validation to avoid redundant latency tracking if the LOW limit
is not valid.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only update the tg->last_finish_time when the low limitaion is
enabled, so we can move the tg->last_finish_time validation a little
forward to avoid getting the unnecessary current time stamp if the
the low limitation is not enabled.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The throtl_downgrade_state() is always used to change to LIMIT_LOW
limitation, thus remove the latter meaningless parameter which
indicates the limitation index.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is unnecessary to force request-based DM to call into bio-based
dm_submit_bio (via indirect disk->fops->submit_bio) only to have it then
call blk_mq_submit_bio().
Fix this by establishing a request-based DM block_device_operations
(dm_rq_blk_dops, which doesn't have .submit_bio) and update
dm_setup_md_queue() to set md->disk->fops to it for
DM_TYPE_REQUEST_BASED.
Remove DM_TYPE_REQUEST_BASED conditional in dm_submit_bio and unexport
blk_mq_submit_bio.
Fixes: c62b37d96b ("block: move ->make_request_fn to struct block_device_operations")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Don't error out if the dasd_biodasdinfo symbol is not available.
Cc: stable@vger.kernel.org
Fixes: 26d7e28e38 ("s390/dasd: remove ioctl_by_bdev calls")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
According to Documentation/block/stat.rst, inflight should not include
I/O requests that are in the queue but not yet dispatched to the device,
but blk-mq identifies as inflight any request that has a tag allocated,
which, for queues without elevator, happens at request allocation time
and before it is queued in the ctx (default case in blk_mq_submit_bio).
In addition, current behavior is different for queues with elevator from
queues without it, since for the former the driver tag is allocated at
dispatch time. A more precise approach would be to only consider
requests with state MQ_RQ_IN_FLIGHT.
This effectively reverts commit 6131837b1d ("blk-mq: count allocated
but not started requests in iostats inflight") to consolidate blk-mq
behavior with itself (elevator case) and with original documentation,
but it differs from the behavior used by the legacy path.
This version differs from v1 by using blk_mq_rq_state to access the
state attribute. Avoid using blk_mq_request_started, which was
suggested, since we don't want to include MQ_RQ_COMPLETE.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move blk_mq_sched_try_merge to blk-merge.c, which allows to mark
a lot of the merge infrastructure static there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Also move the definition from the public blkdev.h to the private
block/blk.h header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Also move the definition from the public blkdev.h to the private
block/blk.h header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_crypt_set_ctx() assumes its gfp_mask argument always includes
__GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed.
For now this assumption is still fine, since no callers violate it.
Making bio_crypt_set_ctx() able to fail would add unneeded complexity.
However, if a caller didn't use __GFP_DIRECT_RECLAIM, it would be very
hard to notice the bug. Make it easier by adding a WARN_ON_ONCE().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Satya Tangirala <satyat@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_crypto_rq_bio_prep() assumes its gfp_mask argument always includes
__GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed.
However, blk_crypto_rq_bio_prep() might be called with GFP_ATOMIC via
setup_clone() in drivers/md/dm-rq.c.
This case isn't currently reachable with a bio that actually has an
encryption context. However, it's fragile to rely on this. Just make
blk_crypto_rq_bio_prep() able to fail.
Suggested-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_crypt_clone() assumes its gfp_mask argument always includes
__GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed.
However, bio_crypt_clone() might be called with GFP_ATOMIC via
setup_clone() in drivers/md/dm-rq.c, or with GFP_NOWAIT via
kcryptd_io_read() in drivers/md/dm-crypt.c.
Neither case is currently reachable with a bio that actually has an
encryption context. However, it's fragile to rely on this. Just make
bio_crypt_clone() able to fail, analogous to bio_integrity_clone().
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Cc: Satya Tangirala <satyat@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All remaining callers of bdget() outside of fs/block_dev.c want to get a
reference to the struct block_device for a given struct hd_struct. Add
a helper just for that and then mark bdget static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use in compat_syscall to import either native or the compat iovecs, and
remove the now superflous compat_import_iovec.
This removes the need for special compat logic in most callers, and
the remaining ones can still be simplified by using __import_iovec
with a bool compat parameter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
scsi_put_cdrom_generic_arg() is copying uninitialized stack memory to
userspace, since the compiler may leave a 3-byte hole in the middle of
`cgc32`. Fix it by adding a padding field to `struct
compat_cdrom_generic_command`.
Cc: stable@vger.kernel.org
Fixes: f3ee6e63a9 ("compat_ioctl: move CDROM_SEND_PACKET handling into scsi")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: syzbot+85433a479a646a064ab3@syzkaller.appspotmail.com
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DM depends on these block 5.10 commits:
22ada802ed block: use lcm_not_zero() when stacking chunk_sectors
07d098e6bb block: allow 'chunk_sectors' to be non-power-of-2
021a24460d block: add QUEUE_FLAG_NOWAIT
6abc49468e dm: add support for REQ_NOWAIT and enable it for linear target
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
'f5bbbbe4d635 ("blk-mq: sync the update nr_hw_queues with
blk_mq_queue_tag_busy_iter")' introduce a bug what we may sleep between
rcu lock. Then '530ca2c9bd69 ("blk-mq: Allow blocking queue tag iter
callbacks")' fix it by get request_queue's ref. And 'a9a808084d6a ("block:
Remove the synchronize_rcu() call from __blk_mq_update_nr_hw_queues()")'
remove the synchronize_rcu in __blk_mq_update_nr_hw_queues. We need
update the confused comments in blk_mq_queue_tag_busy_iter.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Blk-mq should call commit_rqs once 'bd.last != true' and no more
request will come(so virtscsi can kick the virtqueue, e.g.). We already
do that in 'blk_mq_dispatch_rq_list/blk_mq_try_issue_list_directly' while
list not empty and 'queued > 0'. However, we can seen the same scene
once the last request in list call queue_rq and return error like
BLK_STS_IOERR which will not requeue the request, and lead that list
empty but need call commit_rqs too(Or the request for virtscsi will stay
timeout until other request kick virtqueue).
We found this problem by do fsstress test with offline/online virtscsi
device repeat quickly.
Fixes: d666ba98f8 ("blk-mq: add mq_ops->commit_rqs()")
Reported-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We found blk_mq_alloc_rq_maps() takes more time in kernel space when
testing nvme device hot-plugging. The test and anlysis as below.
Debug code,
1, blk_mq_alloc_rq_maps():
u64 start, end;
depth = set->queue_depth;
start = ktime_get_ns();
pr_err("[%d:%s switch:%ld,%ld] queue depth %d, nr_hw_queues %d\n",
current->pid, current->comm, current->nvcsw, current->nivcsw,
set->queue_depth, set->nr_hw_queues);
do {
err = __blk_mq_alloc_rq_maps(set);
if (!err)
break;
set->queue_depth >>= 1;
if (set->queue_depth < set->reserved_tags + BLK_MQ_TAG_MIN) {
err = -ENOMEM;
break;
}
} while (set->queue_depth);
end = ktime_get_ns();
pr_err("[%d:%s switch:%ld,%ld] all hw queues init cost time %lld ns\n",
current->pid, current->comm,
current->nvcsw, current->nivcsw, end - start);
2, __blk_mq_alloc_rq_maps():
u64 start, end;
for (i = 0; i < set->nr_hw_queues; i++) {
start = ktime_get_ns();
if (!__blk_mq_alloc_rq_map(set, i))
goto out_unwind;
end = ktime_get_ns();
pr_err("hw queue %d init cost time %lld ns\n", i, end - start);
}
Test nvme hot-plugging with above debug code, we found it totally cost more
than 3ms in kernel space without being scheduled out when alloc rqs for all
16 hw queues with depth 1023, each hw queue cost about 140-250us. The cost
time will be increased with hw queue number and queue depth increasing. And
in an extreme case, if __blk_mq_alloc_rq_maps() returns -ENOMEM, it will try
"queue_depth >>= 1", more time will be consumed.
[ 428.428771] nvme nvme0: pci function 10000:01:00.0
[ 428.428798] nvme 10000:01:00.0: enabling device (0000 -> 0002)
[ 428.428806] pcieport 10000:00:00.0: can't derive routing for PCI INT A
[ 428.428809] nvme 10000:01:00.0: PCI INT A: no GSI
[ 432.593374] [4688:kworker/u33:8 switch:663,2] queue depth 30, nr_hw_queues 1
[ 432.593404] hw queue 0 init cost time 22883 ns
[ 432.593408] [4688:kworker/u33:8 switch:663,2] all hw queues init cost time 35960 ns
[ 432.595953] nvme nvme0: 16/0/0 default/read/poll queues
[ 432.595958] [4688:kworker/u33:8 switch:700,2] queue depth 1023, nr_hw_queues 16
[ 432.596203] hw queue 0 init cost time 242630 ns
[ 432.596441] hw queue 1 init cost time 235913 ns
[ 432.596659] hw queue 2 init cost time 216461 ns
[ 432.596877] hw queue 3 init cost time 215851 ns
[ 432.597107] hw queue 4 init cost time 228406 ns
[ 432.597336] hw queue 5 init cost time 227298 ns
[ 432.597564] hw queue 6 init cost time 224633 ns
[ 432.597785] hw queue 7 init cost time 219954 ns
[ 432.597937] hw queue 8 init cost time 150930 ns
[ 432.598082] hw queue 9 init cost time 143496 ns
[ 432.598231] hw queue 10 init cost time 147261 ns
[ 432.598397] hw queue 11 init cost time 164522 ns
[ 432.598542] hw queue 12 init cost time 143401 ns
[ 432.598692] hw queue 13 init cost time 148934 ns
[ 432.598841] hw queue 14 init cost time 147194 ns
[ 432.598991] hw queue 15 init cost time 148942 ns
[ 432.598993] [4688:kworker/u33:8 switch:700,2] all hw queues init cost time 3035099 ns
[ 432.602611] nvme0n1: p1
So use this patch to trigger schedule between each hw queue init, to avoid
other threads getting stuck. It is not in atomic context when executing
__blk_mq_alloc_rq_maps(), so it is safe to call cond_resched().
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Three fixes: one in drivers (lpfc) and two for zoned block devices.
The latter also impinges on the block layer but only to introduce a
new block API for setting the zone model rather than fiddling with the
queue directly in the zoned block driver.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX29mRyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishabnAP48vMYD
/cjyGAJfq/0k/U/t6pRPc5tUm89LOWcOJz0SjwD/YXcQNz7mx8MxnypAV1jbWXR7
iyWkPMYVc4EJh7oTARE=
=SQhI
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes: one in drivers (lpfc) and two for zoned block devices.
The latter also impinges on the block layer but only to introduce a
new block API for setting the zone model rather than fiddling with the
queue directly in the zoned block driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: sd_zbc: Fix ZBC disk initialization
scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks
scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported
An iocg may have 0 debt but non-zero delay. The current debt forgiveness
logic doesn't act on such iocgs. This can lead to unexpected behaviors - an
iocg with a little bit of debt will have its delay canceled through debt
forgiveness but one w/o any debt but active delay will have to wait out
until its delay decays out.
This patch updates the debt handling logic so that it treats delays the same
as debts. If either debt or delay is active, debt forgiveness logic kicks in
and acts on both the same way.
Also, avoid turning the debt and delay directly to zero as that can confuse
state transitions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Debt forgiveness logic was counting the number of consecutive !busy periods
as the trigger condition. While this usually works, it can easily be thrown
off by temporary fluctuations especially on configurations w/ short periods.
This patch reimplements debt forgiveness so that:
* Use the average usage over the forgiveness period instead of counting
consecutive periods.
* Debt is reduced at around the target rate (1/2 every 100ms) regardless of
ioc period duration.
* Usage threshold is raised to 50%. Combined with the preceding changes and
the switch to average usage, this makes debt forgivness a lot more
effective at reducing the amount of unnecessary idleness.
* Constants are renamed with DFGV_ prefix.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Debt sets the initial delay duration which is decayed over time. The current
debt reduction halved the debt but didn't change the delay. It prevented
future debts from increasing delay but didn't do anything to lower the
existing delay, limiting the mechanism's ability to reduce unnecessary
idling.
Reset iocg->delay to 0 after debt reduction so that iocg_kick_waitq()
recalculates new delay value based on the reduced debt amount.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Debt reduction was blocked if any iocg was short on budget in the past
period to avoid reducing debts while some iocgs are saturated. However, this
ends up unnecessarily blocking debt reduction due to temporary local
imbalances when the device is generally being underutilized, while also
failing to block when the underlying device is overwhelmed and the usage
becomes low from high latency.
Given that debt accumulation mostly happens with swapout bursts which can
significantly deteriorate the underlying device's latency response, the
current logic is not great.
Let's replace it with ioc->busy_level based condition so that we block debt
reduction when the underlying device is being saturated. ioc_forgive_debts()
call is moved after busy_level determination.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Debt reduction logic is going to be improved and expanded. Factor it out
into ioc_forgive_debts() and generalize the comment a bit. No functional
change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add QUEUE_FLAG_NOWAIT to allow a block device to advertise support for
REQ_NOWAIT. Bio-based devices may set QUEUE_FLAG_NOWAIT where
applicable.
Update QUEUE_FLAG_MQ_DEFAULT to include QUEUE_FLAG_NOWAIT. Also
update submit_bio_checks() to verify it is set for REQ_NOWAIT bios.
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to go through the hd_struct to find the partition number.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a littler helper to make the somewhat arcane bd_contains checks a
little more obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-5.10/block: (140 commits)
bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flag
bdi: invert BDI_CAP_NO_ACCT_WB
bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag
mm: use SWP_SYNCHRONOUS_IO more intelligently
bdi: remove BDI_CAP_SYNCHRONOUS_IO
bdi: remove BDI_CAP_CGROUP_WRITEBACK
block: lift setting the readahead size into the block layer
md: update the optimal I/O size on reshape
bdi: initialize ->ra_pages and ->io_pages in bdi_init
aoe: set an optimal I/O size
bcache: inherit the optimal I/O size
drbd: remove dead code in device_to_statistics
fs: remove the unused SB_I_MULTIROOT flag
block: mark blkdev_get static
PM: mm: cleanup swsusp_swap_check
mm: split swap_type_of
PM: rewrite is_hibernate_resume_dev to not require an inode
mm: cleanup claim_swapfile
ocfs2: cleanup o2hb_region_dev_store
dasd: cleanup dasd_scan_partitions
...
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the
backing_dev_info shared between the block drivers and the writeback code.
To help untangling the dependency replace it with a queue flag and a
superblock flag derived from it. This also helps with the case of e.g.
a file system requiring stable writes due to its own checksumming, but
not forcing it on other users of the block device like the swap code.
One downside is that we an't support the stable_pages_required bdi
attribute in sysfs anymore. It is replaced with a queue attribute which
also is writable for easier testing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just checking SB_I_CGROUPWB for cgroup writeback support is enough.
Either the file system allocates its own bdi (e.g. btrfs), in which case
it is known to support cgroup writeback, or the bdi comes from the block
layer, which always supports cgroup writeback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drivers shouldn't really mess with the readahead size, as that is a VM
concept. Instead set it based on the optimal I/O size by lifting the
algorithm from the md driver when registering the disk. Also set
bdi->io_pages there as well by applying the same scheme based on
max_sectors. To ensure the limits work well for stacking drivers a
new helper is added to update the readahead limits from the block
limits, which is also called from disk_stack_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set up a readahead size by default, as very few users have a good
reason to change it. This means code, ecryptfs, and orangefs now
set up the values while they were previously missing it, while ubifs,
mtd and vboxsf manually set it to 0 to avoid readahead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Richard Weinberger <richard@nod.at> [ubifs, mtd]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blkdev_get_by_dev instead of open coding it using bdget_disk +
blkdev_get, and split the code to read the partition table into a
separate helper to make it a little more obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can only scan for partitions on the whole disk, so move the flag
from struct block_device to struct gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is possible, albeit more unlikely, for a block device to have a non
power-of-2 for chunk_sectors (e.g. 10+2 RAID6 with 128K chunk_sectors,
which results in a full-stripe size of 1280K. This causes the RAID6's
io_opt to be advertised as 1280K, and a stacked device _could_ then be
made to use a blocksize, aka chunk_sectors, that matches non power-of-2
io_opt of underlying RAID6 -- resulting in stacked device's
chunk_sectors being a non power-of-2).
Update blk_queue_chunk_sectors() and blk_max_size_offset() to
accommodate drivers that need a non power-of-2 chunk_sectors.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Like 'io_opt', blk_stack_limits() should stack 'chunk_sectors' using
lcm_not_zero() rather than min_not_zero() -- otherwise the final
'chunk_sectors' could result in sub-optimal alignment of IO to
component devices in the IO stack.
Also, if 'chunk_sectors' isn't a multiple of 'physical_block_size'
then it is a bug in the driver and the device should be flagged as
'misaligned'.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bmd is allocated using kmalloc in bio_alloc_map_data, so make sure
is_null_mapped is properly initialized to false for the !null_mapped
case.
Fixes: f3256075ba ("block: remove the BIO_NULL_MAPPED flag")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.
the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x;
@@
x =
- kzalloc
+ kmalloc
(...)
...
sg_init_table(x,...)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When CONFIG_BLK_DEV_ZONED is disabled, allow using host-aware ZBC disks as
regular disks. In this case, ensure that command completion is correctly
executed by changing sd_zbc_complete() to return good_bytes instead of 0
and causing a hang during device probe (endless retries).
When CONFIG_BLK_DEV_ZONED is enabled and a host-aware disk is detected to
have partitions, it will be used as a regular disk. In this case, make sure
to not do anything in sd_zbc_revalidate_zones() as that triggers warnings.
Since all these different cases result in subtle settings of the disk queue
zoned model, introduce the block layer helper function
blk_queue_set_zoned() to generically implement setting up the effective
zoned model according to the disk type, the presence of partitions on the
disk and CONFIG_BLK_DEV_ZONED configuration.
Link: https://lore.kernel.org/r/20200915073347.832424-2-damien.lemoal@wdc.com
Fixes: b72053072c ("block: allow partitions on host aware zone devices")
Cc: <stable@vger.kernel.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do not need check the bps or iops limitation if bps or iops is unlimited.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The tg_may_dispatch() will call tg_with_in_bps_limit() and
tg_with_in_iops_limit() to check if we can dispatch a bio or
not, which will calculate bps/iops limitation multiple times.
But tg_may_dispatch() is always called under queue lock, which
means the bps/iops limitation will not change in tg_may_dispatch().
So we can calculate the bps/iops limitation only once, and pass
them to tg_with_in_bps_limit() and tg_with_in_iops_limit() to
avoid calculating bps/iops limitation repeatedly.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'throtl_grp_quantum' and 'throtl_quantum' are both read-only
variables, thus better to use readable macros instead of static
variables, which can also save some spaces for .bss area.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
adjust_inuse_and_calc_cost() is responsible for reducing the amount of
donated weights dynamically in period as the budget runs low. Because we
don't want to do full donation calculation in period, we keep latching up
inuse by INUSE_ADJ_STEP_PCT of the active weight of the cgroup until the
resulting hweight_inuse is satisfactory.
Unfortunately, the adj_step calculation was reading the active weight before
acquiring ioc->lock. Because the current thread could have lost race to
activate the iocg to another thread before entering this function, it may
read the active weight as zero before acquiring ioc->lock. When this
happens, the adj_step is calculated as zero and the incremental adjustment
loop becomes an infinite one.
Fix it by fetching the active weight after acquiring ioc->lock.
Fixes: b0853ab4a2 ("blk-iocost: revamp in-period donation snapbacks")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Conceptually, root_iocg->hweight_donating must be less than WEIGHT_ONE but
all hweight calculations round up and thus it may end up >= WEIGHT_ONE
triggering divide-by-zero and other issues. Bound the value to avoid
surprises.
Fixes: e08d02aa5f ("blk-iocost: implement Andy's method for donation weight updates")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These functions can be used to enable iostat for partitions on devices
like md, bcache.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
-----BEGIN PGP SIGNATURE-----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=J16G
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix a regression in bdev partition locking (Christoph)
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
* tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block:
block: Set same_page to false in __bio_try_merge_page if ret is false
nvme-fabrics: allow to queue requests for live queues
block: only call sched requeue_request() for scheduled requests
nvme-tcp: cancel async events before freeing event struct
nvme-rdma: cancel async events before freeing event struct
nvme-fc: cancel async events before freeing event struct
nvme: Revert: Fix controller creation races with teardown flow
block: restore a specific error code in bdev_del_partition
NVMe shares tagset between fabric queue and admin queue or between
connect_q and NS queue, so hctx_may_queue() can be called to allocate
request for these queues.
Tags can be reserved in these tagset. Before error recovery, there is
often lots of in-flight requests which can't be completed, and new
reserved request may be needed in error recovery path. However,
hctx_may_queue() can always return false because there is too many
in-flight requests which can't be completed during error handling.
Finally, nothing can proceed.
Fix this issue by always allowing reserved tag allocation in
hctx_may_queue(). This is reasonable because reserved tags are supposed
to always be available.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: David Milburn <dmilburn@redhat.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
scsi/sg.h is included more than once, Remove the one that isn't
necessary.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The test and the explaination of the patch as bellow.
Before test we added more debug code in blkg_async_bio_workfn():
int count = 0
if (bios.head && bios.head->bi_next) {
need_plug = true;
blk_start_plug(&plug);
}
while ((bio = bio_list_pop(&bios))) {
/*io_punt is a sysctl user interface to control the print*/
if(io_punt) {
printk("[%s:%d] bio start,size:%llu,%d count=%d plug?%d\n",
current->comm, current->pid, bio->bi_iter.bi_sector,
(bio->bi_iter.bi_size)>>9, count++, need_plug);
}
submit_bio(bio);
}
if (need_plug)
blk_finish_plug(&plug);
Steps that need to be set to trigger *PUNT* io before testing:
mount -t btrfs -o compress=lzo /dev/sda6 /btrfs
mount -t cgroup2 nodev /cgroup2
mkdir /cgroup2/cg3
echo "+io" > /cgroup2/cgroup.subtree_control
echo "8:0 wbps=1048576000" > /cgroup2/cg3/io.max #1000M/s
echo $$ > /cgroup2/cg3/cgroup.procs
Then use dd command to test btrfs PUNT io in current shell:
dd if=/dev/zero of=/btrfs/file bs=64K count=100000
Test hardware environment as below:
[root@localhost btrfs]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0-31
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 2
NUMA node(s): 2
Vendor ID: GenuineIntel
With above debug code, test command and test environment, I did the
tests under 3 different system loads, which are triggered by stress:
1, Run 64 threads by command "stress -c 64 &"
[53615.975974] [kworker/u66:18:1490] bio start,size:45583056,8 count=0 plug?1
[53615.975980] [kworker/u66:18:1490] bio start,size:45583064,8 count=1 plug?1
[53615.975984] [kworker/u66:18:1490] bio start,size:45583072,8 count=2 plug?1
[53615.975987] [kworker/u66:18:1490] bio start,size:45583080,8 count=3 plug?1
[53615.975990] [kworker/u66:18:1490] bio start,size:45583088,8 count=4 plug?1
[53615.975993] [kworker/u66:18:1490] bio start,size:45583096,8 count=5 plug?1
... ...
[53615.977041] [kworker/u66:18:1490] bio start,size:45585480,8 count=303 plug?1
[53615.977044] [kworker/u66:18:1490] bio start,size:45585488,8 count=304 plug?1
[53615.977047] [kworker/u66:18:1490] bio start,size:45585496,8 count=305 plug?1
[53615.977050] [kworker/u66:18:1490] bio start,size:45585504,8 count=306 plug?1
[53615.977053] [kworker/u66:18:1490] bio start,size:45585512,8 count=307 plug?1
[53615.977056] [kworker/u66:18:1490] bio start,size:45585520,8 count=308 plug?1
[53615.977058] [kworker/u66:18:1490] bio start,size:45585528,8 count=309 plug?1
2, Run 32 threads by command "stress -c 32 &"
[50586.290521] [kworker/u66:6:32351] bio start,size:45806496,8 count=0 plug?1
[50586.290526] [kworker/u66:6:32351] bio start,size:45806504,8 count=1 plug?1
[50586.290529] [kworker/u66:6:32351] bio start,size:45806512,8 count=2 plug?1
[50586.290531] [kworker/u66:6:32351] bio start,size:45806520,8 count=3 plug?1
[50586.290533] [kworker/u66:6:32351] bio start,size:45806528,8 count=4 plug?1
[50586.290535] [kworker/u66:6:32351] bio start,size:45806536,8 count=5 plug?1
... ...
[50586.299640] [kworker/u66:5:32350] bio start,size:45808576,8 count=252 plug?1
[50586.299643] [kworker/u66:5:32350] bio start,size:45808584,8 count=253 plug?1
[50586.299646] [kworker/u66:5:32350] bio start,size:45808592,8 count=254 plug?1
[50586.299649] [kworker/u66:5:32350] bio start,size:45808600,8 count=255 plug?1
[50586.299652] [kworker/u66:5:32350] bio start,size:45808608,8 count=256 plug?1
[50586.299663] [kworker/u66:5:32350] bio start,size:45808616,8 count=257 plug?1
[50586.299665] [kworker/u66:5:32350] bio start,size:45808624,8 count=258 plug?1
[50586.299668] [kworker/u66:5:32350] bio start,size:45808632,8 count=259 plug?1
3, Don't run thread by stress
[50861.355246] [kworker/u66:19:32376] bio start,size:13544504,8 count=0 plug?0
[50861.355288] [kworker/u66:19:32376] bio start,size:13544512,8 count=0 plug?0
[50861.355322] [kworker/u66:19:32376] bio start,size:13544520,8 count=0 plug?0
[50861.355353] [kworker/u66:19:32376] bio start,size:13544528,8 count=0 plug?0
[50861.355392] [kworker/u66:19:32376] bio start,size:13544536,8 count=0 plug?0
[50861.355431] [kworker/u66:19:32376] bio start,size:13544544,8 count=0 plug?0
[50861.355468] [kworker/u66:19:32376] bio start,size:13544552,8 count=0 plug?0
[50861.355499] [kworker/u66:19:32376] bio start,size:13544560,8 count=0 plug?0
[50861.355532] [kworker/u66:19:32376] bio start,size:13544568,8 count=0 plug?0
[50861.355575] [kworker/u66:19:32376] bio start,size:13544576,8 count=0 plug?0
[50861.355618] [kworker/u66:19:32376] bio start,size:13544584,8 count=0 plug?0
[50861.355659] [kworker/u66:19:32376] bio start,size:13544592,8 count=0 plug?0
[50861.355740] [kworker/u66:0:32346] bio start,size:13544600,8 count=0 plug?1
[50861.355748] [kworker/u66:0:32346] bio start,size:13544608,8 count=1 plug?1
[50861.355962] [kworker/u66:2:32347] bio start,size:13544616,8 count=0 plug?0
[50861.356272] [kworker/u66:7:31962] bio start,size:13544624,8 count=0 plug?0
[50861.356446] [kworker/u66:7:31962] bio start,size:13544632,8 count=0 plug?0
[50861.356567] [kworker/u66:7:31962] bio start,size:13544640,8 count=0 plug?0
[50861.356707] [kworker/u66:19:32376] bio start,size:13544648,8 count=0 plug?0
[50861.356748] [kworker/u66:15:32355] bio start,size:13544656,8 count=0 plug?0
[50861.356825] [kworker/u66:17:31970] bio start,size:13544664,8 count=0 plug?0
Analysis of above 3 test results with different system load:
>From above test, we can see more and more continuous bios can be plugged
with system load increasing. When run "stress -c 64 &", 310 continuous
bios are plugged; When run "stress -c 32 &", 260 continuous bios are
plugged; When don't run stress, at most only 2 continuous bios are
plugged, in most cases, bio_list only contains one single bio.
How to explain above phenomenon:
We know, in submit_bio(), if the bio is a REQ_CGROUP_PUNT io, it will
queue a work to workqueue blkcg_punt_bio_wq. But when the workqueue is
scheduled, it depends on the system load. When system load is low, the
workqueue will be quickly scheduled, and the bio in bio_list will be
quickly processed in blkg_async_bio_workfn(), so there is less chance
that the same io submit thread can add multiple continuous bios to
bio_list before workqueue is scheduled to run. The analysis aligned with
above test "3".
When system load is high, there is some delay before the workqueue can
be scheduled to run, the higher the system load the greater the delay.
So there is more chance that the same io submit thread can add multiple
continuous bios to bio_list. Then when the workqueue is scheduled to run,
there are more continuous bios in bio_list, which will be processed in
blkg_async_bio_workfn(). The analysis aligned with above test "1" and "2".
According to test, we can get io performance improved with the patch,
especially when system load is higher. Another optimazition is to use
the plug only when bio_list contains at least 2 bios.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Like check_disk_changed, except that it does not call ->revalidate_disk
but leaves that to the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we hit the UINT_MAX limit of bio->bi_iter.bi_size and so we are anyway
not merging this page in this bio, then it make sense to make same_page
also as false before returning.
Without this patch, we hit below WARNING in iomap.
This mostly happens with very large memory system and / or after tweaking
vm dirty threshold params to delay writeback of dirty data.
WARNING: CPU: 18 PID: 5130 at fs/iomap/buffered-io.c:74 iomap_page_release+0x120/0x150
CPU: 18 PID: 5130 Comm: fio Kdump: loaded Tainted: G W 5.8.0-rc3 #6
Call Trace:
__remove_mapping+0x154/0x320 (unreliable)
iomap_releasepage+0x80/0x180
try_to_release_page+0x94/0xe0
invalidate_inode_page+0xc8/0x110
invalidate_mapping_pages+0x1dc/0x540
generic_fadvise+0x3c8/0x450
xfs_file_fadvise+0x2c/0xe0 [xfs]
vfs_fadvise+0x3c/0x60
ksys_fadvise64_64+0x68/0xe0
sys_fadvise64+0x28/0x40
system_call_exception+0xf8/0x1c0
system_call_common+0xf0/0x278
Fixes: cc90bc6842 ("block: fix "check bi_size overflow before merge"")
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yang Yang reported the following crash caused by requeueing a flush
request in Kyber:
[ 2.517297] Unable to handle kernel paging request at virtual address ffffffd8071c0b00
...
[ 2.517468] pc : clear_bit+0x18/0x2c
[ 2.517502] lr : sbitmap_queue_clear+0x40/0x228
[ 2.517503] sp : ffffff800832bc60 pstate : 00c00145
...
[ 2.517599] Process ksoftirqd/5 (pid: 51, stack limit = 0xffffff8008328000)
[ 2.517602] Call trace:
[ 2.517606] clear_bit+0x18/0x2c
[ 2.517619] kyber_finish_request+0x74/0x80
[ 2.517627] blk_mq_requeue_request+0x3c/0xc0
[ 2.517637] __scsi_queue_insert+0x11c/0x148
[ 2.517640] scsi_softirq_done+0x114/0x130
[ 2.517643] blk_done_softirq+0x7c/0xb0
[ 2.517651] __do_softirq+0x208/0x3bc
[ 2.517657] run_ksoftirqd+0x34/0x60
[ 2.517663] smpboot_thread_fn+0x1c4/0x2c0
[ 2.517667] kthread+0x110/0x120
[ 2.517669] ret_from_fork+0x10/0x18
This happens because Kyber doesn't track flush requests, so
kyber_finish_request() reads a garbage domain token. Only call the
scheduler's requeue_request() hook if RQF_ELVPRIV is set (like we do for
the finish_request() hook in blk_mq_free_request()). Now that we're
handling it in blk-mq, also remove the check from BFQ.
Reported-by: Yang Yang <yang.yang@vivo.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to the naming used by the other entries so that we can use the
QUEUE_RW_ENTRY helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add two helpers macros to avoid boilerplate code for the queue sysfs
entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mdadm relies on the fact that deleting an invalid partition returns
-ENXIO or -ENOTTY to detect if a block device is a partition or a
whole device.
Fixes: 08fc1ab6d7 ("block: fix locking in bdev_del_partition")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we usually free the hctx->sched_data by e->type->ops.exit_hctx(),
and no users will use blk_mq_sched_free_hctx_data() function.
Remove it.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Discarding blocks and buffers under a mounted filesystem is hardly
anything admin wants to do. Usually it will confuse the filesystem and
sometimes the loss of buffer_head state (including b_private field) can
even cause crashes like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 4 PID: 203778 Comm: jbd2/dm-3-8 Kdump: loaded Tainted: G O --------- - - 4.18.0-147.5.0.5.h126.eulerosv2r9.x86_64 #1
Hardware name: Huawei RH2288H V3/BC11HGSA0, BIOS 1.57 08/11/2015
RIP: 0010:jbd2_journal_grab_journal_head+0x1b/0x40 [jbd2]
...
Call Trace:
__jbd2_journal_insert_checkpoint+0x23/0x70 [jbd2]
jbd2_journal_commit_transaction+0x155f/0x1b60 [jbd2]
kjournald2+0xbd/0x270 [jbd2]
So if we don't have block device open with O_EXCL already, claim the
block device while we truncate buffer cache. This makes sure any
exclusive block device user (such as filesystem) cannot operate on the
device while we are discarding buffer cache.
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: fix !CONFIG_BLOCK error in truncate_bdev_range()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=8fvz
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
High CPU utilization on "native_queued_spin_lock_slowpath" due to lock
contention is possible for mq-deadline and bfq IO schedulers
when nr_hw_queues is more than one.
It is because kblockd work queue can submit IO from all online CPUs
(through blk_mq_run_hw_queues()) even though only one hctx has pending
commands.
The elevator callback .has_work for mq-deadline and bfq scheduler considers
pending work if there are any IOs on request queue but it does not account
hctx context.
Add a per-hctx 'elevator_queued' count to the hctx to avoid triggering
the elevator even though there are no requests queued.
[jpg: Relocated atomic_dec() in dd_dispatch_request(), update commit message per Kashyap]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For when using a shared sbitmap, no longer should the number of active
request queues per hctx be relied on for when judging how to share the tag
bitmap.
Instead maintain the number of active request queues per tag_set, and make
the judgement based on that.
Originally-from: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The per-hctx nr_active value can no longer be used to fairly assign a share
of tag depth per request queue for when using a shared sbitmap, as it does
not consider that the tags are shared tags over all hctx's.
For this case, record the nr_active_requests per request_queue, and make
the judgement based on that value.
Co-developed-with: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-mq.h and blk-mq-tag.h include on each other, which is less than ideal.
Locate hctx_may_queue() to blk-mq.h, as it is not really tag specific code.
In this way, we can drop the blk-mq-tag.h include of blk-mq.h
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some SCSI HBAs (such as HPSA, megaraid, mpt3sas, hisi_sas_v3 ..) support
multiple reply queues with single hostwide tags.
In addition, these drivers want to use interrupt assignment in
pci_alloc_irq_vectors(PCI_IRQ_AFFINITY). However, as discussed in [0],
CPU hotplug may cause in-flight IO completion to not be serviced when an
interrupt is shutdown. That problem is solved in commit bf0beec060
("blk-mq: drain I/O when all CPUs in a hctx are offline").
However, to take advantage of that blk-mq feature, the HBA HW queuess are
required to be mapped to that of the blk-mq hctx's; to do that, the HBA HW
queues need to be exposed to the upper layer.
In making that transition, the per-SCSI command request tags are no
longer unique per Scsi host - they are just unique per hctx. As such, the
HBA LLDD would have to generate this tag internally, which has a certain
performance overhead.
However another problem is that blk-mq assumes the host may accept
(Scsi_host.can_queue * #hw queue) commands. In commit 6eb045e092 ("scsi:
core: avoid host-wide host_busy counter for scsi_mq"), the Scsi host busy
counter was removed, which would stop the LLDD being sent more than
.can_queue commands; however, it should still be ensured that the block
layer does not issue more than .can_queue commands to the Scsi host.
To solve this problem, introduce a shared sbitmap per blk_mq_tag_set,
which may be requested at init time.
New flag BLK_MQ_F_TAG_HCTX_SHARED should be set when requesting the
tagset to indicate whether the shared sbitmap should be used.
Even when BLK_MQ_F_TAG_HCTX_SHARED is set, a full set of tags and requests
are still allocated per hctx; the reason for this is that if tags and
requests were only allocated for a single hctx - like hctx0 - it may break
block drivers which expect a request be associated with a specific hctx,
i.e. not always hctx0. This will introduce extra memory usage.
This change is based on work originally from Ming Lei in [1] and from
Bart's suggestion in [2].
[0] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/
[1] https://lore.kernel.org/linux-block/20190531022801.10003-1-ming.lei@redhat.com/
[2] https://lore.kernel.org/linux-block/ff77beff-5fd9-9f05-12b6-826922bace1f@huawei.com/T/#m3db0a602f095cbcbff27e9c884d6b4ae826144be
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce pointers for the blk_mq_tags regular and reserved bitmap tags,
with the goal of later being able to use a common shared tag bitmap across
all HW contexts in a set.
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass hctx/tagset flags argument down to blk_mq_init_tags() and
blk_mq_free_tags() for selective init/free.
For now, make it include the alloc policy flag, which can be evaluated
when needed (in blk_mq_init_tags()).
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the tags are allocated in blk_mq_init_tags(), it's better practice
to free in that same function upon error, rather than a callee which is to
init the bitmap tags (blk_mq_init_tags()).
[jpg: Split from an earlier patch with a new commit message]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function does not set the depth, but rather transitions from
shared to non-shared queues and vice versa.
So rename it to blk_mq_update_tag_set_shared() to better reflect
its purpose.
[jpg: take out some unrelated changes in blk_mq_init_bitmap_tags()]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BLK_MQ_F_TAG_SHARED actually means that tags is shared among request
queues, all of which should belong to LUNs attached to same HBA.
So rename it to make the point explicitly.
[jpg: rebase a few times, add rnbd-clt.c change]
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only virtio_blk and xen-blkfront set the revalidate argument to true,
and both do not implement the ->revalidate_disk method. So switch
to the helper that just updates the size instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bd_invalidate with a new BDEV_NEED_PART_SCAN flag in a bd_flags
variable to better describe the condition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig
Linus Torvalds
John Garry
Ming Lei
Jan Kara
Tejun Heo
Andres Freund
Sebastian Andrzej Siewior
Baolin Wang
Daniel Wagner
Minwoo Im
Alan Stern
Bart Van Assche
Jeffle Xu
Damien Le Moal
Pavel Begunkov
Mike Snitzer
Yu Kuai
Chaitanya Kulkarni
Lei Chen
Ingo Molnar
Peter Zijlstra
Eric Biggers
Hannes Reinecke
Naohiro Aota
Gabriel Krisman Bertazi
Mauro Carvalho Chehab
Xianting Tian
Keith Busch
Yang Yang
Yufen Yu
Tetsuo Handa
Gustavo A. R. Silva
Peilin Ye
yangerkun
Jens Axboe
Julia Lawall
Song Liu
Tian Tao
Ritesh Harjani
Omar Sandoval
Kashyap Desai