There are three bugs in this code:
1) If we ccp_init_data() fails for &src then we need to free aad.
Use goto e_aad instead of goto e_ctx.
2) The label to free the &final_wa was named incorrectly as "e_tag" but
it should have been "e_final_wa". One error path leaked &final_wa.
3) The &tag was leaked on one error path. In that case, I added a free
before the goto because the resource was local to that block.
Fixes: 36cf515b9b ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Reported-by: "minihanshen(沈明航)" <minihanshen@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: John Allen <john.allen@amd.com>
Tested-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new CCP/PSP PCI device ID and corresponding entry in the dev_vdata
struct.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To support runtime PM, use the function 'pci_set_power_state' to change
the power state. Therefore, method _PS0 or _PR0 needs to be filled by
platform. So check whether the method is supported, if not, print a
prompt information.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To avoid repeatedly obtaining 'qm' from 'filp', parameter passing of
debugfs function directly use 'qm' instead of 'filp'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Accelerator devices support runtime PM to reduce power consumption.
This patch adds the runtime PM suspend/resume callbacks to the
accelerator devices.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The accelerator devices support runtime PM, when device is in suspended, an
exception will occur if reading registers. Therefore, this patch uses
'debugfs_create_file' instead of 'debugfs_create_regset32' to create
debugfs file, and then the driver can get the device status before
reading the register.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the endian configuration of the hardware is abnormal, it will
cause the SEC engine is faulty that reports empty message. And it
will affect the normal function of the hardware. Currently the soft
configuration method can't restore the faulty device. The endian
needs to be configured according to the system properties. So fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Because the algs registration process has added a judgment.
So need to add the judgment for the abnormal exiting process.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the VF is newer than the PF, it decides whether it is compatible or
not. In case it is compatible, store that information in the
vf.compatible flag in the accel_dev structure.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Suggested-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_iov_putmsg() is only used inside the intel_qat module
therefore should not be exported.
Remove EXPORT_SYMBOL for the function adf_iov_putmsg().
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a race condition during shutdown in adf_disable_sriov() where
both the PF and the VF drivers are loaded on the host system.
The PF notifies a VF with a "RESTARTING" message due to which the VF
starts an asynchronous worker to stop and shutdown itself.
At the same time the PF calls pci_disable_sriov() which invokes the
remove() routine on the VF device driver triggering the shutdown flow
again.
This change fixes the problem by ensuring that the VF flushes the worker
that performs stop()/shutdown() before these two functions are called in
the remove(). To make sure that no additional PV/VF messages are
processed by the VF, interrupts are disabled before flushing the
workqueue.
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All QAT GEN2 devices share the same register offset for masking interrupts,
so they don't need any complex device specific infrastructure.
Remove this function in favor of a constant in order to simplify the code.
Also, future generations may require a more complex device specific
handling, making the current approach obsolete anyway.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently all the functions related to the activation of the PFVF
protocol, both on PF and VF, include the direction specific "vf2pf"
name.
Replace the existing naming schema with:
- a direction agnostic naming, that applies to both PF and VF, for the
function pointer ("pfvf")
- a direction specific naming schema for the implementations ("pf2vf" or
"vf2pf")
In particular this patch renames:
- adf_pf_enable_vf2pf_comms() in adf_enable_pf2vf_comms()
- enable_vf2pf_comms() in enable_pfvf_comms()
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make sure all the steps in the initialization sequence are complete
before any completion event notification.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move IOV functions at the end of hw_data so that PFVF functions related
functions are group together.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
At start and shutdown, VFs notify the PF about their state. These
notifications are carried out through a message exchange using the PFVF
protocol.
Function names lead to believe they do perform init or shutdown logic.
This is to fix the naming to better reflect their purpose.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the PF interrupt handler, the interrupt is disabled for a set of VFs
by writing to the interrupt source mask register, ERRMSK.
The interrupt is re-enabled in the bottom half handler by writing to the
same CSR. This is done through the functions enable_vf2pf_interrupts()
and disable_vf2pf_interrupts() which perform a read-modify-write
operation on the ERRMSK registers to mask and unmask the source of
interrupt.
There can be a race condition where the top half handler for one VF
interrupt runs just as the bottom half for another VF is about to
re-enable the interrupt. Depending on whether the top or bottom half
updates the CSR first, this would result either in a spurious interrupt
or in the interrupt not being re-enabled.
This patch protects the access of ERRMSK with a spinlock.
The functions adf_enable_vf2pf_interrupts() and
adf_disable_vf2pf_interrupts() have been changed to acquire a spin lock
before accessing and modifying the ERRMSK registers. These functions use
spin_lock_irqsave() to disable IRQs and avoid potential deadlocks.
In addition, the function adf_disable_vf2pf_interrupts_irq() has been
added. This uses spin_lock() and it is meant to be used in the top half
only.
Signed-off-by: Kanchana Velusamy <kanchanax.velusamy@intel.com>
Co-developed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Interrupt code to enable interrupts from PF does not belong to the
protocol code, so move it to the interrupt handling specific file for
better code organization.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use reinit_completion() to set to a clean state a completion variable,
used to coordinate the VF to PF request-response flow, before every
new VF request.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PF driver uses the tasklet vf2pf_bh_tasklet to schedule a workqueue
to handle the vf2vf protocol (pf2vf_resp_wq).
Since the tasklet is only used to schedule the workqueue, this patch
removes it and schedules the pf2vf_resp_wq workqueue directly for the
top half.
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename ADF_PFVF_COMPATIBILITY_VERSION in ADF_PFVF_COMPAT_THIS_VERSION
since it is used to indicate the current version of the PFVF protocol.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a chance that the PFVF handler, adf_vf2pf_req_hndl(), runs
twice for the same request when multiple interrupts come simultaneously
from different VFs.
Since the source VF is identified by a positional bit set in the ERRSOU
registers and that is not cleared until the bottom half completes, new
top halves from other VFs may reschedule a second bottom half for
previous interrupts.
This patch solves the problem in the ISR handler by not considering
sources with already disabled interrupts (and processing pending), as
set in the ERRMSK registers.
Also, move some definitions where actually needed.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT GEN2 devices suffer from a defect where the MSI interrupt can be
sent multiple times.
If the second (spurious) interrupt is handled before the bottom half
handler runs, then the extra interrupt is effectively ignored because
the bottom half is only scheduled once.
However, if the top half runs again after the bottom half runs, this
will appear as a spurious PF to VF interrupt.
This can be avoided by checking the interrupt mask register in addition
to the interrupt source register in the interrupt handler.
This patch is based on earlier work done by Conor McLoughlin.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The top half of the VF drivers handled only a source at the time.
If an interrupt for PF2VF and bundle occurred at the same time, the ISR
scheduled only the bottom half for PF2VF.
This patch fixes the VF top half so that if both sources of interrupt
trigger at the same time, both bottom halves are scheduled.
This patch is based on earlier work done by Conor McLoughlin.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_dev_init() ignores the error code reported by
enable_vf2pf_comms(). If the latter fails, e.g. the VF is not compatible
with the pf, then the load of the VF driver progresses.
This patch changes adf_dev_init() so that the error code from
enable_vf2pf_comms() is returned to the caller.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable device interrupts after the setup of the interrupt handlers.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the empty implementation of sriov_configure() and set the
sriov_configure member of the pci_driver structure to NULL.
This way, if a user tries to enable VFs on a device, when kernel and
driver are built with CONFIG_PCI_IOV=n, the kernel reports an error
message saying that the driver does not support SRIOV configuration via
sysfs.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace vf_mask type with unsigned long to avoid a stack-out-of-bound.
This is to fix the following warning reported by KASAN the first time
adf_msix_isr_ae() gets called.
[ 692.091987] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x28/0x50
[ 692.092017] Read of size 8 at addr ffff88afdf789e60 by task swapper/32/0
[ 692.092076] Call Trace:
[ 692.092089] <IRQ>
[ 692.092101] dump_stack+0x9c/0xcf
[ 692.092132] print_address_description.constprop.0+0x18/0x130
[ 692.092164] ? find_first_bit+0x28/0x50
[ 692.092185] kasan_report.cold+0x7f/0x111
[ 692.092213] ? static_obj+0x10/0x80
[ 692.092234] ? find_first_bit+0x28/0x50
[ 692.092262] find_first_bit+0x28/0x50
[ 692.092288] adf_msix_isr_ae+0x16e/0x230 [intel_qat]
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
s/Enable/Disable/ when describing 'adf_disable_aer()'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If an error occurs after a 'adf_enable_aer()' call, it must be undone by a
corresponding 'adf_disable_aer()' call, as already done in the remove
function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the DMA mask from 64 to 48 for Gen2 devices as they cannot handle
addresses greater than 48 bits.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The wrappers in include/linux/pci-dma-compat.h should go away.
Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent
and less verbose 'dma_set_mask_and_coherent()' call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
lockdep complains that in omap-aes, the list_lock is taken both with
softirqs enabled at probe time, and also in softirq context, which
could lead to a deadlock:
================================
WARNING: inconsistent lock state
5.14.0-rc1-00035-gc836005b01c5-dirty #69 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/0/7 [HC0[0]:SC1[3]:HE1:SE0] takes:
bf00e014 (list_lock){+.?.}-{2:2}, at: omap_aes_find_dev+0x18/0x54 [omap_aes_driver]
{SOFTIRQ-ON-W} state was registered at:
_raw_spin_lock+0x40/0x50
omap_aes_probe+0x1d4/0x664 [omap_aes_driver]
platform_probe+0x58/0xb8
really_probe+0xbc/0x314
__driver_probe_device+0x80/0xe4
driver_probe_device+0x30/0xc8
__driver_attach+0x70/0xf4
bus_for_each_dev+0x70/0xb4
bus_add_driver+0xf0/0x1d4
driver_register+0x74/0x108
do_one_initcall+0x84/0x2e4
do_init_module+0x5c/0x240
load_module+0x221c/0x2584
sys_finit_module+0xb0/0xec
ret_fast_syscall+0x0/0x2c
0xbed90b30
irq event stamp: 111800
hardirqs last enabled at (111800): [<c02a21e4>] __kmalloc+0x484/0x5ec
hardirqs last disabled at (111799): [<c02a21f0>] __kmalloc+0x490/0x5ec
softirqs last enabled at (111776): [<c01015f0>] __do_softirq+0x2b8/0x4d0
softirqs last disabled at (111781): [<c0135948>] run_ksoftirqd+0x34/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(list_lock);
<Interrupt>
lock(list_lock);
*** DEADLOCK ***
2 locks held by ksoftirqd/0/7:
#0: c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb+0x6c/0x260
#1: c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x2c/0xdc
stack backtrace:
CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 5.14.0-rc1-00035-gc836005b01c5-dirty #69
Hardware name: Generic AM43 (Flattened Device Tree)
[<c010e6e0>] (unwind_backtrace) from [<c010b9d0>] (show_stack+0x10/0x14)
[<c010b9d0>] (show_stack) from [<c017c640>] (mark_lock.part.17+0x5bc/0xd04)
[<c017c640>] (mark_lock.part.17) from [<c017d9e4>] (__lock_acquire+0x960/0x2fa4)
[<c017d9e4>] (__lock_acquire) from [<c0180980>] (lock_acquire+0x10c/0x358)
[<c0180980>] (lock_acquire) from [<c093d324>] (_raw_spin_lock_bh+0x44/0x58)
[<c093d324>] (_raw_spin_lock_bh) from [<bf00b258>] (omap_aes_find_dev+0x18/0x54 [omap_aes_driver])
[<bf00b258>] (omap_aes_find_dev [omap_aes_driver]) from [<bf00b328>] (omap_aes_crypt+0x94/0xd4 [omap_aes_driver])
[<bf00b328>] (omap_aes_crypt [omap_aes_driver]) from [<c08ac6d0>] (esp_input+0x1b0/0x2c8)
[<c08ac6d0>] (esp_input) from [<c08c9e90>] (xfrm_input+0x410/0x1290)
[<c08c9e90>] (xfrm_input) from [<c08b6374>] (xfrm4_esp_rcv+0x54/0x11c)
[<c08b6374>] (xfrm4_esp_rcv) from [<c0838840>] (ip_protocol_deliver_rcu+0x48/0x3bc)
[<c0838840>] (ip_protocol_deliver_rcu) from [<c0838c50>] (ip_local_deliver_finish+0x9c/0xdc)
[<c0838c50>] (ip_local_deliver_finish) from [<c0838dd8>] (ip_local_deliver+0x148/0x1b0)
[<c0838dd8>] (ip_local_deliver) from [<c0838f5c>] (ip_rcv+0x11c/0x180)
[<c0838f5c>] (ip_rcv) from [<c077e3a4>] (__netif_receive_skb_one_core+0x54/0x74)
[<c077e3a4>] (__netif_receive_skb_one_core) from [<c077e588>] (netif_receive_skb+0xa8/0x260)
[<c077e588>] (netif_receive_skb) from [<c068d6d4>] (cpsw_rx_handler+0x224/0x2fc)
[<c068d6d4>] (cpsw_rx_handler) from [<c0688ccc>] (__cpdma_chan_process+0xf4/0x188)
[<c0688ccc>] (__cpdma_chan_process) from [<c068a0c0>] (cpdma_chan_process+0x3c/0x5c)
[<c068a0c0>] (cpdma_chan_process) from [<c0690e14>] (cpsw_rx_mq_poll+0x44/0x98)
[<c0690e14>] (cpsw_rx_mq_poll) from [<c0780810>] (__napi_poll+0x28/0x268)
[<c0780810>] (__napi_poll) from [<c0780c64>] (net_rx_action+0xcc/0x204)
[<c0780c64>] (net_rx_action) from [<c0101478>] (__do_softirq+0x140/0x4d0)
[<c0101478>] (__do_softirq) from [<c0135948>] (run_ksoftirqd+0x34/0x50)
[<c0135948>] (run_ksoftirqd) from [<c01583b8>] (smpboot_thread_fn+0xf4/0x1d8)
[<c01583b8>] (smpboot_thread_fn) from [<c01546dc>] (kthread+0x14c/0x174)
[<c01546dc>] (kthread) from [<c010013c>] (ret_from_fork+0x14/0x38)
...
The omap-des and omap-sham drivers appear to have a similar issue.
Fix this by using spin_{,un}lock_bh() around device list access in all
the probe and remove functions.
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
omap_crypto_cleanup() currently copies data from sg to orig if either
copy flag is set. However OMAP_CRYPTO_SG_COPIED means that sg refers
to the same pages as orig, truncated to len bytes. There is no need
to copy in this case.
Only copy data if the OMAP_CRYPTO_DATA_COPIED flag is set.
Fixes: 74ed87e7e7 ("crypto: omap - add base support library for common ...")
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the type of probe argument in functions which implement reset
methods from int to bool to make the context and intent clear.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com
Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Most reset methods are of the form "pci_*_reset(dev, probe)". pcie_flr()
was an exception because it relied on a separate pcie_has_flr() function
instead of taking a "probe" argument.
Add "pcie_reset_flr(dev, probe)" to follow the convention. Remove
pcie_has_flr().
Some pcie_flr() callers that did not use pcie_has_flr() remain.
[bhelgaas: commit log, rework pcie_reset_flr() to use dev->devcap directly]
Link: https://lore.kernel.org/r/20210817180500.1253-3-ameynarkhede03@gmail.com
Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Kunpeng930 hpre device supports dynamic clock gating. When doing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables hpre dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 sec device supports dynamic clock gating. When doing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables sec dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 zip device supports dynamic clock gating. When executing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables zip dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kfree_sensitive is a kernel API to clear sensitive information
that should not be leaked to other future users of the same memory
objects and free the memory. Its function is the same as the
combination of memzero_explicit and kfree. Thus, we can replace the
combination APIs with the single kfree_sensitive API.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The commit 97f9ac3db6 ("crypto: ccp - Add support for SEV-ES to the
PSP driver") added support to allocate Trusted Memory Region (TMR)
used during the SEV-ES firmware initialization. The TMR gets locked
during the firmware initialization and unlocked during the shutdown.
While the TMR is locked, access to it is disallowed.
Currently, the CCP driver does not shutdown the firmware during the
kexec reboot, leaving the TMR memory locked.
Register a callback to shutdown the SEV firmware on the kexec boot.
Fixes: 97f9ac3db6 ("crypto: ccp - Add support for SEV-ES to the PSP driver")
Reported-by: Lucas Nussbaum <lucas.nussbaum@inria.fr>
Tested-by: Lucas Nussbaum <lucas.nussbaum@inria.fr>
Cc: <stable@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit b0a3d8986a ("crypto: omap-sham - Use pm_runtime_irq_safe()") added
the use of pm_runtime_irq_safe() as pm_runtime_get_sync() was called
from a tasklet.
We now use the crypto engine queue instead of a custom queue since
commit 33c3d434d91 ("crypto: omap-sham - convert to use crypto engine").
We want to drop the use of pm_runtime_irq_safe() in general as it takes a
permanent usage count on the parent device causing issues for power
management.
Based on testing with CONFIG_DEBUG_ATOMIC_SLEEP=y, modprobe omap-sham,
followed by modprobe tcrypt sec=1 mode=423, I have not been able to
reproduce the scheduling while atomic issue seen earlier with current
kernels and we can just drop the call to pm_runtime_irq_safe().
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Let's get rid of the suspend and resume calls to runtime PM as these calls
do not idle the hardware. The runtime suspend has been disabled for
system suspend since commit 88d26136a2 ("PM: Prevent runtime suspend
during system resume").
Instead of runtime PM, the system suspend and resume functions should call
driver internal shared functions to idle the hardware as needed.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
FLAGS_INIT is now unused and we can just use standard runtime PM
functions instead.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We should pair the usage of pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend().
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Let's only initialize dd->req after omap_sham_hw_init() in case of
errors.
Looks like leaving dd->req initialized on omap_sham_hw_init() errors is
is not causing issues though as we return on errors. So this patch can be
applied as clean-up.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We should not clear FLAGS_DMA_ACTIVE before omap_sham_update_dma_stop() is
done calling dma_unmap_sg(). We already clear FLAGS_DMA_ACTIVE at the
end of omap_sham_update_dma_stop().
The early clearing of FLAGS_DMA_ACTIVE is not causing issues as we do not
need to defer anything based on FLAGS_DMA_ACTIVE currently. So this can be
applied as clean-up.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dan Carpenter
Linus Torvalds
John Allen
Weili Qian
Kai Ye
Giovanni Cabiddu
Ahsan Atta
Marco Chiappero
Kanchana Velusamy
Svyatoslav Pankratov
Christophe JAILLET
Ben Hutchings
Amey Narkhede
Sebastian Andrzej Siewior
Jason Wang
Brijesh Singh
Tony Lindgren