Граф коммитов

21 Коммитов

Автор SHA1 Сообщение Дата
Vinod Koul 897fe40e52 soundwire: add a blank line between functions
For improving code readability it helps to have a blank line between
function so add when missing.

Checkpatch complains:
CHECK: Please use a blank line after function/struct/union/enum
declarations

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02 17:17:51 +02:00
Vinod Koul 7d3b3cdfd1 soundwire: fix more typos
Found few more typos in the code, fix them

CHECK: 'and and' may be misspelled - perhaps 'and'?
CHECK: 'smaple' may be misspelled - perhaps 'sample'?

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02 17:17:51 +02:00
Vinod Koul 62f0cec3b0 soundwire: more alignment fixes
Found few more issues reported checkpatch on code alignment so fix those
as well in the soundwire core.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02 17:17:51 +02:00
Vinod Koul fa358bb536 soundwire: remove empty line before/after braces
Linux code style doesn't expect empty lines before or after braces and
gives warning:

CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Blank lines aren't necessary before a close brace '}'

Fix these instances in soundwire core

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02 17:17:50 +02:00
Pierre-Louis Bossart 17ed5bef49 soundwire: add missing newlines in dynamic debug logs
For some reason the newlines are not used everywhere. Fix as needed.

Reported-by: Joe Perches <joe@perches.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02 17:16:29 +02:00
Pierre-Louis Bossart 1fe74a5e41 soundwire: stream: fix alignment issues
Use Linux style

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02 17:16:28 +02:00
Pierre-Louis Bossart a25eab2991 soundwire: stream: remove useless initialization of local variable
no need to reset return value.

Detected with cppcheck:
[drivers/soundwire/stream.c:332]: (style) Variable 'ret' is assigned a
value that is never used.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-04-14 15:33:26 +05:30
Shreyas NC 9b5c132a1e soundwire: keep track of Masters in a stream
A multi link bankswitch can be done if the hardware supports and
the stream is handled by multiple Master(s).

This preparatory patch adds support to track m_rt in a stream.
Modifying m_rt_count and usage is added as part of the next patch.

Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-27 09:49:48 +05:30
Shreyas NC ce6e74d008 soundwire: Add support for multi link bank switch
In cases of multiple Masters in a stream, synchronization
between multiple Master(s) is achieved by performing bank switch
together and using Master methods.

Add sdw_ml_bank_switch() to wait for completion of bank switch.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-27 09:49:48 +05:30
Vinod Koul 48949722ce soundwire: Handle multiple master instances in a stream
For each SoundWire stream operation, we need to parse master
list and operate upon all master runtime.

This is a preparatory patch to do the boilerplate conversion
of stream handling from single master runtime to handle a
list of master runtime. The code to support bank switch for
multiple master instances is added in the next patch.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-27 09:49:48 +05:30
Sanyog Kale 0c4a1049cf soundwire: Add support to lock across bus instances
Currently, the stream concept is limited to single Master and one
or more Codecs.

This patch extends the concept to support multiple Master(s)
sharing the same reference clock and synchronized in the hardware.
Modify sdw_stream_runtime to support a list of sdw_master_runtime
for the same. The existing reference to a single m_rt is removed
in the next patch.

Typically to lock, one would acquire a global lock and then lock
bus instances. In this case, the caller framework(ASoC DPCM)
guarantees that stream operations on a card are always serialized.
So, there is no race condition and hence no need for global lock.

Bus lock(s) are acquired to reconfigure the bus while the stream
is set-up.
So, we add sdw_acquire_bus_lock()/sdw_release_bus_lock() APIs which
are used only to reconfigure the bus.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-27 09:49:48 +05:30
Sanyog Kale 8d6ccf5ceb soundwire: Fix acquiring bus lock twice during master release
As part of sdw_stream_remove_master(), sdw_stream_remove_slave() is called
which results in bus lock being acquired twice.

So, fix it by performing specific Slave remove operations in
sdw_release_master_stream() instead of calling sdw_stream_remove_slave().

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-27 09:49:48 +05:30
Shreyas NC 3fef1a2259 soundwire: Fix incorrect exit after configuring stream
In sdw_stream_add_master() after the Master ports are configured,
the stream is released incorrectly.

So, fix it by avoiding stream release after configuring the Master
for the stream.
While at it, rename the label appropriately.

Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-27 09:49:48 +05:30
Shreyas NC 0aebe40bae soundwire: Fix duplicate stream state assignment
For a SoundWire stream it is expected that a Slave is added to the
stream before Master is added.

So, move the stream state to CONFIGURED after the first Slave is
added and remove the stream state assignment for Master add.
Along with these changes, add additional comments to explain the same.

Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-27 09:49:48 +05:30
Mauro Carvalho Chehab 34962fb807 docs: Fix more broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.

Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:11:26 -03:00
Sanyog Kale 5c3eb9f7bd soundwire: Add stream configuration APIs
Add APIs for prepare, enable, disable and de-prepare stream.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11 21:47:06 +05:30
Sanyog Kale 99b8a5d608 soundwire: Add bank switch routine
SoundWire supports two registers banks. So, program the alternate bank
with new configuration and then performs bank switch.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11 21:47:05 +05:30
Sanyog Kale 79df15b7d3 soundwire: Add helpers for ports operations
Add helpers to configure, prepare, enable, disable and
de-prepare ports.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11 21:47:05 +05:30
Sanyog Kale f8101c74aa soundwire: Add Master and Slave port programming
Master and Slave port registers need to be programmed for each port
used in a stream. Add the helpers for port register programming.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11 21:47:04 +05:30
Sanyog Kale bbe7379d80 soundwire: Add support for port management
Add Soundwire port data structures and APIS for initialization
and release of ports.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11 21:47:04 +05:30
Sanyog Kale 89e590535f soundwire: Add support for SoundWire stream management
This patch adds APIs and relevant stream data structures
for initialization and release of stream.

Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11 21:47:03 +05:30