The current VME bus error handler adds errors to the bridge error list.
vme_master_{read,write} then traverses that list to look for relevant
errors.
Such scheme didn't work well for accesses going through vme_master_mmap
because they would also allocate a vme_bus_error, but have no way to do
vme_clear_errors call to free that memory.
This changes the error handling process to be other way around: now
vme_master_{read,write} defines a window in VME address space that will
catch possible errors. VME bus error interrupt only traverses these
windows and marks those that had errors in them.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Also changes vme_bus_error_handler to take generic address modifier code
instead of raw contents of a device-specific attribute register.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error handling code found in tsi148 is not device specific. In fact it
already relies on shared vme_bus_error struct and vme_bridge.vme_errors
field. The other bridge driver could reuse this code if it is shared.
This introduces a slight behavior change: vme error message won't be
triggered in a rare case when err_chk=1 and kmalloc fails.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Universe II allows PCI address grannularity of 4K or 64K depending on
the window id. tsi148 only supports 64K. Existing driver implementations
are validating window size against this grannularity and then use that
very size as alignment parameter to pci_bus_alloc_resource. This
constraint is excessive, alignment by granularity should be enough.
This changes alignment constraint from size to a fixed constraint of
64K.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function can return negative value.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was observed that setting TIF_MEMDIE before sending SIGKILL at
oom_kill_process() allows memory reserves to be depleted by allocations
which are not needed for terminating the OOM victim.
This patch reverts commit 6bc2b856bb ("staging: android: lowmemorykiller:
set TIF_MEMDIE before send kill sig"), for oom_kill_process() was updated
to send SIGKILL before setting TIF_MEMDIE.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove obd_export_nid2str as it is defined but not used anymore.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare lustre_fs_type, do_lcfg, lustre_fill_super, lustre_put_lsi,
lustre_init_lsi, lustre_start_simple, server_name2index and
server_name2fsname as static since they are used only in this
particular file.Also remove corresponding declarations from header
files.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare obd_init_checks as static since it is used only in this
particular file.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare obd_export_nid2str and obd_zombie_impexp_cull as static
since they are used only in this particular file. Also remove the
corresponding declarations from header file
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare ptlrpc_register_bulk as static since it is used only in this
particular file.Also remove the declaration from header file
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare req_capsule_init_area and req_capsule_field_present as static
since they are used only in this particular file. Also remove the
corresponding declarations from header files.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare ptlrpc_pinger_remove_timeouts as static since it is used
only in this particular file.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare ptl_get_pid as static since it is used only in this particular
file. Also remove declaration from corresponding header file
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare ptlrpc_nrs_policy_register as static since it is used
only in this particular file. Also remove corresponding declaration
from header files.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_root field in the bus type struct has been replaced by a
new mechanism to identify the root dprc. Remove all references
to dev_root.
Signed-off-by: Itai Katz <itai.katz@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a counter to track the number of root DPRCs.
When this counter is greater then 0 it means that at least
one root DPRC device exists.
Signed-off-by: Itai Katz <itai.katz@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support multiple root dprcs, instead of relying on the
dev_root field of the bus type struct, instead create a
function to traverse to the root dprc and return a pointer
to the device struct
Signed-off-by: Itai Katz <itai.katz@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of relying on assumptions about fields in data
structures, abstract the test for whether a dprc is a root
dprc into a function.
Signed-off-by: Itai Katz <itai.katz@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add function to test for existence of an fsl-mc bus instance
instead of doing this by looking directly at a field in the
bus type struct.
Signed-off-by: Itai Katz <itai.katz@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
do_key() is no longer needed.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes a cursor positioning hack that no longer seems to be required.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Registration of visorinput_open() and visorinput_close() for each device
allow us to eliminate unnecessary activity when nobody in user-land
cares.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BUS_HOST wasn't really appropriate, so I changed to BUS_VIRTUAL, which is
what virtio uses.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just a simple search and replace in the comments.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Multi-line comments were modified to conform to kernel conventions:
/*
* multi-line
* comments
*/
doc-test /** */ for some comments was removed.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This also gave me a warning with the assignment:
visorinput_dev->keycode = visorkbd_keycode;
because input_dev->keycode is NOT static but visorkbd_keycode now is, so
I went ahead and also added logic to stash away non-static copies of
visorkbd_keycode[] and visorkbd_ext_keycode[] within visorinput_devdata,
and use the copy to assign to visorinput_dev->keycode. This change is
also technically required, because user-space can remap keys, and we
don't want this to be shared with the other keyboard devices running on
the same system.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to be more consistent with kernel conventions used elsewhere,
I have re-ordered declarations in visorinput.c to follow this general
order (where possible):
* #defines
* struct/enum/union declarations
* static declarations (const if possible for all of them)
* forward function declarations where absolutely necessary
Exceptions were made for the static declarations like the driver
declaration, given that it depends on previously-defined callbacks.
So such declarations are at the end of visorinput.c.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
keyboardchannel.h and mousechannel.h are now included within
visorinput.c directly.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This visorhid driver provides a Human Interface Device, but is not at all
using HID, the protocol. It's a plain input driver, so for clarity, it is
being renamed to visorinput.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of all ELSE_AFTER_BRACE type errors reported by checkpatch.pl.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes blank lines before close brace '}'
CHECK: Blank lines aren't necessary before a close brace '}'
drivers/staging/wilc1000/host_interface.c:5366:
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces s32Error with result to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes return type of host_int_wait_msg_queue_idle from s32
to int. s32Error gets return value from wilc_mq_send that has return
type of int. It should be changed return type of
host_int_wait_msg_queue_idle by int as well as data type of s32Error.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces hWFIDrv with wfi_drv that is first argument of
host_int_set_mac_chnl_num to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces u8ChNum with channel that is second argument of
host_int_set_mac_chnl_num to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces s32Error with result to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes NULL comparison style to use ! operator found by
checkpatch.pl
CHECK: Comparison to NULL could be written "!pstrWFIDrv"
drivers/staging/wilc1000/host_interface.c:5324:
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes return type of host_int_set_mac_chnl_num from s32 to
int. s32Error gets return value from wilc_mq_send function that
has return type of int. It should be changed return type of
host_int_set_mac_chnl_num function by int as well as data type of
s32Error.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Kalinkin
Andrzej Hajda
Geliang Tang
Tetsuo Handa
Shraddha Barke
H Hartley Sweeten
Itai Katz
Malcolm Priestley
Tim Sell
Martin Kletzander
Chaehyun Lim