This patch adds support for a new boolean 'inter_set' field in struct
icc_provider. Setting it to 'true' enables calling '->set' for
inter-provider node pairs. All existing users of the interconnect
framework allocate this structure with kzalloc, and are therefore
unaffected by this change.
This makes it easier for hierarchies like exynos-bus, where every bus
is probed separately and registers a separate interconnect provider, to
model constraints between buses.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200521122841.8867-4-s.nawrocki@samsung.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
This patch relaxes the condition in of_icc_get_from_provider() so that
it is no longer required to set '#interconnect-cells' to <1> in the DT,
and therefore it is not required to supply dummy node IDs in the
'interconnects' property when node IDs are dynamically generated rather
than hardcoded (statically allocated).
In case of the devfreq driver for exynos-bus, node IDs are dynamically
allocated and '#interconnect-cells' is always zero.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20200521122841.8867-3-s.nawrocki@samsung.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
This patch makes the above function public (for use in exynos-bus devfreq
driver).
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20200521122841.8867-2-s.nawrocki@samsung.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
- Add support for interconnect bandwidth to the OPP core (Georgi
Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
- Add support for regulator enable/disable to the OPP core (Kamil
Konieczny).
- Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
- Make the tegra186 cpufreq driver set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
- Prevent the ACPI power management from using power resources
with devices where the list of power resources for power state
D0 (full power) is missing (Rafael Wysocki).
- Annotate a hibernation-related function with __init (Christophe
JAILLET).
-----BEGIN PGP SIGNATURE-----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=p5eu
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are operating performance points (OPP) framework updates mostly,
including support for interconnect bandwidth in the OPP core, plus a
few cpufreq changes, including boost support in the CPPC cpufreq
driver, an ACPI device power management fix and a hibernation code
cleanup.
Specifics:
- Add support for interconnect bandwidth to the OPP core (Georgi
Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
- Add support for regulator enable/disable to the OPP core (Kamil
Konieczny).
- Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
- Make the tegra186 cpufreq driver set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
- Prevent the ACPI power management from using power resources with
devices where the list of power resources for power state D0 (full
power) is missing (Rafael Wysocki).
- Annotate a hibernation-related function with __init (Christophe
JAILLET)"
* tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Avoid using power resources if there are none for D0
cpufreq: CPPC: add SW BOOST support
cpufreq: change '.set_boost' to act on one policy
PM: hibernate: Add __init annotation to swsusp_header_init()
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
Pull operating performance points (OPP) framework changes for v5.8
from Viresh Kumar:
"This contains:
- support for interconnect bandwidth in the OPP core (Georgi Djakov,
Saravana Kannan, Sibi Sankar, Viresh Kumar).
- support for regulator enable/disable (Kamil Konieczny).
This is based on three patches from the interconnect tree which
shall get merged via Greg's tree."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
interconnect: Remove unused module exit code from core
interconnect: Disallow interconnect core to be built as a module
interconnect: Add of_icc_get_by_index() helper function
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
Expose the bandwidth information as well via debugfs.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
These are the interconnect changes for the 5.8-rc1 merge window:
Core changes:
- Convert the framework core from tristate to bool to make handling
dependencies between other core frameworks easier
- Add of_icc_get_by_index()
- Add devm_of_icc_get() helper function
- Add icc_enable() and icc_disable() helpers
New drivers:
- Platform driver for NXP i.MX8MM SoC
- Platform driver for NXP i.MX8MN SoC
- Platform driver for NXP i.MX8MQ SoC
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-----BEGIN PGP SIGNATURE-----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=+f9u
-----END PGP SIGNATURE-----
Merge tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next
Georgi writes:
interconnect changes for 5.8
These are the interconnect changes for the 5.8-rc1 merge window:
Core changes:
- Convert the framework core from tristate to bool to make handling
dependencies between other core frameworks easier
- Add of_icc_get_by_index()
- Add devm_of_icc_get() helper function
- Add icc_enable() and icc_disable() helpers
New drivers:
- Platform driver for NXP i.MX8MM SoC
- Platform driver for NXP i.MX8MN SoC
- Platform driver for NXP i.MX8MQ SoC
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: Remove unused module exit code from core
interconnect: Disallow interconnect core to be built as a module
interconnect: Add of_icc_get_by_index() helper function
interconnect: Add helpers for enabling/disabling a path
interconnect: imx: Fix return value check in imx_icc_node_init_qos()
interconnect: imx: Add platform driver for imx8mn
interconnect: imx: Add platform driver for imx8mq
interconnect: imx: Add platform driver for imx8mm
interconnect: Add imx core driver
dt-bindings: interconnect: Add bindings for imx8m noc
interconnect: Add devm_of_icc_get() as exported API for users
This is an immutable branch shared with the OPP tree. It contains also
the patches to convert the interconnect framework from tristate to bool
after Greg agreed with that. This will make the integration between
the OPP layer and interconnect much easier.
* icc-get-by-index:
interconnect: Add of_icc_get_by_index() helper function
interconnect: Disallow interconnect core to be built as a module
interconnect: Remove unused module exit code from core
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The interconnect core is currently always built in:
menuconfig INTERCONNECT
bool "On-Chip Interconnect management support"
So remove the module_exit function and symbolically rename module_init
to device_initcall to drive home the point.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1572546532-19248-3-git-send-email-jcrouse@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Building individual drivers as modules is fine but allowing a core
framework to be built as a module makes it really complex and should be
avoided.
Whatever uses the interconnect core APIs must also be built as a module
if interconnect core is built as module, else we will see compilation
failures.
If another core framework (like cpufreq, clk, etc), that can't be built
as module, needs to use interconnect APIs then we will start seeing
compilation failures with allmodconfig configurations as the symbols
(like of_icc_get()) used in other frameworks will not be available in
the built-in image.
Disallow the interconnect core to be built as a module to avoid all
these issues.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/b789cce388dd1f2906492f307dea6780c398bc6a.1567065991.git.viresh.kumar@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
This is the same as the traditional of_icc_get() function, but the
difference is that it takes index as an argument, instead of name.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
There is a repeated pattern in multiple drivers where they want to switch
the bandwidth between zero and some other value. This is happening often
in the suspend/resume callbacks. Let's add helper functions to enable and
disable the path, so that callers don't have to take care of remembering
the bandwidth values and handle this in the framework instead.
With this patch the users can call icc_disable() and icc_enable() to lower
their bandwidth request to zero and then restore it back to it's previous
value.
Suggested-by: Evan Green <evgreen@chromium.org>
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20200507120846.8354-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
In case of error, the function of_parse_phandle() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Fixes: f0d8048525 ("interconnect: Add imx core driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20200509030214.14435-1-weiyongjun1@huawei.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add a platform driver for the i.MX8MM SoC describing bus topology.
Bandwidth adjustments is currently only supported on the DDRC and main
NOC. Scaling for the vpu/gpu/display NICs could be added in the future.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Link: https://lore.kernel.org/r/b14eef179dbd837a486619724b8033490f49db72.1586174566.git.leonard.crestez@nxp.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
This adds support for i.MX SoC family to interconnect framework.
Platform drivers can describe the interconnect graph and several
adjustment knobs where icc node bandwidth is converted to a
DEV_PM_QOS_MIN_FREQUENCY request.
The interconnect provider is probed through the main NOC device and
other adjustable nodes on the same graph are found from a
fsl,scalable-nodes phandle array property.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/r/35920e673df6c04cbbb7d877a7d4ba25fd91a784.1586174566.git.leonard.crestez@nxp.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Users can use devm version of of_icc_get() to benefit from automatic
resource release.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1586946198-13912-2-git-send-email-akashast@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Currently, if tcs_cmd_gen is called with commit=false, then
tcs_cmd::wait is left uninitialized. Since the tcs_cmd structures passed
to this function aren't zero-initialized, then we're left with random
wait values. This results in waiting for completion for more commands
than is necessary, depending on what's on the stack at the time.
Removing the unnecessary if-condition fixes this, but add an explicit
memset of the tcs_cmd structure as well to ensure predictable behavior
if more tcs_cmd members are added in the future.
Fixes: 976daac4a1 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200319231021.18108-1-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20200415130327.23059-2-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is a pull request with interconnect changes for the 5.7-rc1 merge
window. It contains just driver updates, and these are:
- Refactoring of the SDM845 driver, which is now improved to better
represent the hardware.
- New driver for SC7180 platforms.
- New driver for OSM L3 interconnect hardware found on SDM845/SC7180
platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-----BEGIN PGP SIGNATURE-----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=jHM0
-----END PGP SIGNATURE-----
Merge tag 'icc-5.7-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next
Georgi writes:
interconnect changes for 5.7
Here is a pull request with interconnect changes for the 5.7-rc1 merge
window. It contains just driver updates, and these are:
- Refactoring of the SDM845 driver, which is now improved to better
represent the hardware.
- New driver for SC7180 platforms.
- New driver for OSM L3 interconnect hardware found on SDM845/SC7180
platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.7-rc1' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: qcom: Add OSM L3 support on SC7180
dt-bindings: interconnect: Add OSM L3 DT binding on SC7180
interconnect: qcom: Add OSM L3 interconnect provider support
dt-bindings: interconnect: Add OSM L3 DT bindings
interconnect: qcom: Allow icc node to be used across icc providers
interconnect: qcom: Add SC7180 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings
interconnect: qcom: sdm845: Split qnodes into their respective NoCs
interconnect: qcom: Consolidate interconnect RPMh support
dt-bindings: interconnect: Update Qualcomm SDM845 DT bindings
dt-bindings: interconnect: Add YAML schemas for QCOM bcm-voter
dt-bindings: interconnect: Convert qcom,sdm845 to DT schema
Add Operating State Manager (OSM) L3 interconnect provider support on
SC7180 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20200227105632.15041-6-sibis@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
On some Qualcomm SoCs, Operating State Manager (OSM) controls the
resources of scaling L3 caches. Add a driver to handle bandwidth
requests to OSM L3 from CPU on SDM845 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20200227105632.15041-4-sibis@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Move the icc node ids to a common header, this will allow for
referencing/linking of icc nodes to multiple icc providers on
SDM845 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20200227105632.15041-2-sibis@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add driver for the Qualcomm interconnect buses found in SC7180 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Link: https://lore.kernel.org/r/1583241493-21212-3-git-send-email-okukatla@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When we allocate memory, kasprintf() can fail and we must check its
return value.
Fixes: 05309830e1 ("interconnect: Add a name to struct icc_path")
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20200226110420.5357-2-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to better represent the hardware and its different Network-On-Chip
devices, split the sdm845 provider driver into NoC specific providers.
Remove duplicate functionality already provided by the icc rpmh and
bcm voter drivers to calculate and commit bandwidth requests to hardware.
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20200209183411.17195-6-sibis@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add bcm voter driver and add support for RPMh specific interconnect
providers which implements the set and aggregate functionalities that
translates bandwidth requests into RPMh messages. These modules provide
a common set of functionalities for all Qualcomm RPMh based interconnect
providers and should help reduce code duplication when adding new
providers.
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200228095951.15457-1-sibis@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add driver for the Qualcomm interconnect buses found in MSM8916 based
platforms. The topology consists of three NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Use IS_ERR() to ensure that the path passed to icc_set_bw() is valid.
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Now we can have a tag associated with the path. Add this information
to the interconnect_summary file, as the current information in debugfs
is incomplete.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The interconnect graphs can be difficult to understand and the current
"interconnect_summary" file doesn't even display links in any way.
Add a new "interconnect_graph" file to debugfs in the graphviz "dot"
format which describes interconnect providers, nodes and links.
The file is human-readable and can be visualized by piping through
graphviz. Example:
ssh $TARGET cat /sys/kernel/debug/interconnect/interconnect_graph \
| dot -Tsvg > interconnect_graph.svg
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Now we have a common function for standard aggregation, so let's use it,
instead of duplicating the code.
Reviewed-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Currently there is one very standard aggregation method that is used by
several drivers. Let's add this as a common function, so that drivers
could just point to it, instead of copy/pasting code.
Suggested-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The tracepoints can help with understanding the system behavior of a
given interconnect path when the consumer drivers change their bandwidth
demands. This might be interesting when we want to monitor the requested
interconnect bandwidth for each client driver. The paths may share the
same nodes and this will help to understand "who and when is requesting
what". All this is useful for subsystem drivers developers and may also
provide hints when optimizing the power and performance profile of the
system.
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When debugging interconnect things, it turned out that saving the path
name and including it in the traces is quite useful, especially for
devices with multiple paths.
For the path name we use the one specified in DT, or if we use platform
data, the name is based on the source and destination node names.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Move the interconnect framework internal structs into a separate file,
so that it can be included and used by ftrace code. This will allow us
to expose some more useful information in the traces.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
There is a new helper function for removing all nodes. Let's use it instead
of duplicating the code.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The removal of all nodes from a provider seem to be a common functionality
for all existing users and it would make sense to factor out this into a
a common helper function.
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
As we will remove items off the list using list_del(), we need to use the
safe version of list_for_each_entry().
Fixes: 4e60a9568d ("interconnect: qcom: add msm8974 driver")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20191212075332.16202-5-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we will remove items off the list using list_del(), we need to use the
safe version of list_for_each_entry().
Fixes: 5e4e6c4d3a ("interconnect: qcom: Add QCS404 interconnect provider driver")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Cc: <stable@vger.kernel.org> # v5.4
Link: https://lore.kernel.org/r/20191212075332.16202-4-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we will remove items off the list using list_del(), we need to use the
safe version of list_for_each_entry().
Fixes: b5d2f74107 ("interconnect: qcom: Add sdm845 interconnect provider driver")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://lore.kernel.org/r/20191212075332.16202-3-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20191212075332.16202-2-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We must ensure that the tag is not changed while we aggregate the
requests. Currently the icc_set_tag() is not using any locks and this
may cause the values to be aggregated incorrectly. Fix this by acquiring
the icc_lock while we set the tag.
Link: https://lore.kernel.org/lkml/20191018141750.17032-1-georgi.djakov@linaro.org/
Fixes: 127ab2cc5f ("interconnect: Add support for path tags")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
This is a struct with a trailing zero-length array of icc_node pointers
but it's allocated as if it were a single array of icc_nodes instead.
This allocates too much memory at probe time but shouldn't have any
noticeable effect. Both sdm845 and qcs404 are affected.
Fix by replacing kcalloc with kzalloc and using the "struct_size" macro.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes: 5e4e6c4d3a ("interconnect: qcom: Add QCS404 interconnect provider driver")
Link: https://lore.kernel.org/linux-pm/a7360abb6561917e30bbfaa6084578449152bf1d.1569348056.git.leonard.crestez@nxp.com/
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The macro to generate a Bus Controller Manager (BCM) TCS command is used
by the interconnect driver but might also be interesting to other
drivers that need to construct TCS commands for sub processors so move
it out of the sdm845 specific file and into the header.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
There is one compilation error when CONFIG_INTERCONNECT_QCOM_QCS404=y and
CONFIG_INTERCONNECT_QCOM_SMD_RPM=y, as well as CONFIG_COMPILE_TEST=y,
but CONFIG_QCOM_SMD_RPM is not set, logs as below:
drivers/interconnect/qcom/smd-rpm.o: In function `qcom_icc_rpm_smd_send':
smd-rpm.c:(.text+0xe4): undefined reference to `qcom_rpm_smd_write'
Makefile:1071: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1
This is because
INTERCONNECT_QCOM_QCS404 depends on QCOM_SMD_RPM || COMPILE_TEST.
Here CONFIG_COMPILE_TEST=y, so CONFIG_INTERCONNECT_QCOM_SMD_RPM
is selected. If CONFIG_QCOM_SMD_RPM is not set, then
qcom_rpm_smd_write() is not defined, and compilation error happen.
Fix this by removing COMPILE_TEST from CONFIG_INTERCONNECT_QCOM_QCS404.
Fixes: 5e4e6c4d3a ("interconnect: qcom: Add QCS404 interconnect provider driver")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add driver for the interconnect buses found in Qualcomm QCS404-based
platforms. The topology consists of three NoCs that are controlled by
a remote processor. This remote processor collects the aggregated
bandwidth for each master-slave pairs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
On some Qualcomm SoCs, there is a remote processor, which controls some of
the Network-On-Chip interconnect resources. Other CPUs express their needs
by communicating with this processor. Add a driver to handle communication
with this remote processor.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add support for wake and sleep commands by using a tag to indicate
whether or not the aggregate and set requests fall into execution
state specific bucket.
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Introduce an optional callback in interconnect provider drivers. It can be
used for implementing actions, that need to be executed before the actual
aggregation of the bandwidth requests has started.
The benefit of this for now is that it will significantly simplify the code
in provider drivers.
Suggested-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Consumers may have use cases with different bandwidth requirements based
on the system or driver state. The consumer driver can append a specific
tag to the path and pass this information to the interconnect platform
driver to do the aggregation based on this state.
Introduce icc_set_tag() function that will allow the consumers to append
an optional tag to each path. The aggregation of these tagged paths is
platform specific.
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When consumers report their bandwidth needs with icc_set_bw(), it's
possible that the requested amount of bandwidth is not available or just
the new configuration fails to apply on some path. In this case revert to
the previous configuration and propagate the error back to the consumers
to let them know that bandwidth is not available, hardware is busy or
whatever error is returned by the interconnect platform driver.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce Qualcomm SDM845 specific provider driver using the
interconnect framework.
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a functionality to provide information about the current constraints
per each node and provider.
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we support only platform data for specifying the interconnect
endpoints. As now the endpoints are hard-coded into the consumer driver
this may lead to complications when a single driver is used by multiple
SoCs, which may have different interconnect topology.
To avoid cluttering the consumer drivers, introduce a translation function
to help us get the board specific interconnect data from device-tree.
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces a new API to get requirements and configure the
interconnect buses across the entire chipset to fit with the current
demand.
The API is using a consumer/provider-based model, where the providers are
the interconnect buses and the consumers could be various drivers.
The consumers request interconnect resources (path) between endpoints and
set the desired constraints on this data flow path. The providers receive
requests from consumers and aggregate these requests for all master-slave
pairs on that path. Then the providers configure each node along the path
to support a bandwidth that satisfies all bandwidth requests that cross
through that node. The topology could be complicated and multi-tiered and
is SoC specific.
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Artur Świgoń
Linus Torvalds
Rafael J. Wysocki
Viresh Kumar
Greg Kroah-Hartman
Georgi Djakov
Jordan Crouse
Wei Yongjun
ChenTao
Leonard Crestez
Akash Asthana
Mike Tipton
Sibi Sankar
Odelu Kukatla
David Dai
Krzysztof Kozlowski
Brian Masney
Mao Wenan
Bjorn Andersson
Thomas Gleixner
Yangtao Li