Add two sysfs node: core_id, config_id, user can read them to fetch the
HW product information.
Also, use memset to initialize config_id, rather than quirky C syntax.
Courtesy of Nathan Chancellor <natechancellor@gmail.com>.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
[Merged Nathan's patch that uses memset to initialize config_id into
original patch as the fixes tag changed due to rebase, reworded the
commit to reference the merged patch]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
It's mandatory and considered core state since ioctls rely on this
working.
Thanks to Laurent for pointing out this gap.
v2: Clarify to "atomic drivers" only.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190506144629.5976-1-daniel.vetter@ffwll.ch
Remove duplicate headers which are included twice.
Signed-off-by: Jagadeesh Pagadala <jagdsh.linux@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Dave Airlie <airlied@linux.ie>
[danvet: drop changes to panel-raspberrypi, they break the build]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1556906293-128921-1-git-send-email-jagdsh.linux@gmail.com
virtio_gpu_fence_emit() always returns 0, since it
has no error paths.
Consequently no calls for virtio_gpu_fence_emit()
use the return value, and it can be removed.
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190506091034.30289-1-robert.foss@collabora.com
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It was changed to GFP_ATOMIC in commit ec2f0577c (add & use
virtio_gpu_queue_fenced_ctrl_buffer) because the allocation happened
with a spinlock held. That was no longer true after commit
9fdd90c0f (add virtio_gpu_alloc_fence()).
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190429221021.159784-1-olvaffe@gmail.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Robert Foss <robert.foss@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For most drivers, drm_fence_init is followed by drm_fence_emit
immediately. But for our driver, they are done separately. We also
don't know the fence seqno until drm_fence_emit.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190429220825.156644-2-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is motivated by having meaningful ftrace events, but it also
fixes use cases where dma_fence_is_later is called, such as in
sync_file_merge.
In other drivers, fence creation and cmdbuf submission normally
happen atomically,
mutex_lock();
fence = dma_fence_create(..., ++timeline->seqno);
submit_cmdbuf();
mutex_unlock();
and have no such issue. But in our driver, because most ioctls
queue commands into ctrlq, we do not want to grab a lock. Instead,
we set seqno to 0 when a fence is created, and update it when the
command is finally queued and the seqno is known.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190429220825.156644-1-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The DMA masks need to be set correctly before any DMA API activity kicks
off, and the current point in panfrost_probe() is way too late in that
regard. since panfrost_mmu_init() has already set up a live address
space and DMA-mapped MMU pagetables. We can't set masks until we've
queried the appropriate value from MMU_FEATURES, but as soon as
reasonably possible after that should suffice.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/64361b929a5c61d2ab9580262ecb3d369164cfcb.1556195258.git.robin.murphy@arm.com
-misc-next-fixes.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlzMmCIACgkQlvcN/ahK
BwqHEwf+LNISngz8pjHWljiaOQGfMHhE2LHR55C4ncF8bFUD82k7zVwxEm0Ls7b9
xnmoGGTnG46viUoZDcZsWcy/BkEYbEQ7aTsaexDJ1w9SeMDh0OKrlPlsSJjKXDGL
mUM8zVaRnKuFCwTmh3O0GPLV2iNyTwjPiIXBwcif2/ZLWpCrzwZqv4bgiiSo+eOD
+12qL9h+MdlTWXvLCroMe44o2QNnKukkkGUAaT/oQloJPhe8hzEU9WloY+5VgGaH
IZ0mPcDz5QjU6OflmHrH6XSpcp5UdRsgks7ws9+zdACiPeS/XNgpnqPSIi/EXGtK
vgIkSe0SAFH87iRihjN+5bHEhK9fug==
=c8P8
-----END PGP SIGNATURE-----
Merge panfrost-fixes into drm-misc-next-fixes
Merging some panfrost fixes as well as one rockchip fix that _just_
missed feature freeze.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
If there is a match in the HW DB, the function is left early, before
inititalizing the idle mask. Fix this by doing the init earlier, as
only old GPUs, not present in the HW DB need a different idle mask.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Also reject TDRs if another one already running.
v2:
Stop all schedulers across device and entire XGMI hive before
force signaling HW fences.
Avoid passing job_signaled to helper fnctions to keep all the decision
making about skipping HW reset in one place.
v3:
Fix SW sched. hang after non HW reset. sched.hw_rq_count has to be balanced
against it's decrement in drm_sched_stop in non HW reset case.
v4: rebase
v5: Revert v3 as we do it now in sceduler code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1555599624-12285-6-git-send-email-andrey.grodzovsky@amd.com
Problem:
Sched thread's cleanup function races against TO handler
and removes the guilty job from mirror list and we
have no way of differentiating if the job was removed from within the
TO handler or from the sched thread's clean-up function.
Fix:
Add a flag to scheduler to hint the TO handler that the guilty job needs
to be explicitly released.
v2: whitespace fix
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1555599624-12285-5-git-send-email-andrey.grodzovsky@amd.com
We now destroy finished jobs from the worker thread to make sure that
we never destroy a job currently in timeout processing.
By this we avoid holding lock around ring mirror list in drm_sched_stop
which should solve a deadlock reported by a user.
v2: Remove unused variable.
v4: Move guilty job free into sched code.
v5:
Move sched->hw_rq_count to drm_sched_start to account for counter
decrement in drm_sched_stop even when we don't call resubmit jobs
if guily job did signal.
v6: remove unused variable
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109692
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1555599624-12285-3-git-send-email-andrey.grodzovsky@amd.com
Unfortunately userspace users of this API cannot be publicly disclosed
yet.
This commit effectively disables timeline syncobj ioctls for all
drivers. Each driver wishing to support this feature will need to
expose DRIVER_SYNCOBJ_TIMELINE.
v2: Add uAPI capability check (Christian)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416125750.31370-1-lionel.g.landwerlin@intel.com
We've been somewhat inconsistent when adding the new ioctl and
returned ENODEV instead of EOPNOTSUPPORTED upon failing the syncobj
capibility.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: ea569910cb ("drm/syncobj: add transition iotcls between binary and timeline v2")
Fixes: 01d6c35783 ("drm/syncobj: add support for timeline point wait v8")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com> for the series.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416123048.2913-1-lionel.g.landwerlin@intel.com
sphinx: squash warning (Sean)
Cc: Philip Yang <Philip.Yang@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlzJ7o0ACgkQlvcN/ahK
Bwq3Dgf/SOIjcR6Kxz6f6M2qg0PfsVpHdl7P8mtaofg6DoLsmdUeYP+D6h+eINMj
rNev6QjH7NXTS9Z17Z6hTVMUkYC9pi6LlkXx/4BYF6lPnt7Jy3h4qkBch8PshtBJ
ijmrv08EEKMrEdJKKpLQ0XsBiq5AzEN3kX+Lxlic29glvmpwpkSyQomGPjDUcmBd
/nVZRc9fdHS2qU7sl0nROqm4u5tBSGyV+uDp9Jpjobr45ptJd9l23jY2/JFn3cCk
pyGGbHE67y67iqofvwZWCx4IW0zCoAHmo4TQiXGdDsYV9Be8vLajK1ui63aw1ZD4
5s/N82FgIC9cy6inGsNG1SKDMJamcQ==
=2x7W
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2019-05-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
core: restore drm mmap_range size back to 1TB (Philip)
sphinx: squash warning (Sean)
Cc: Philip Yang <Philip.Yang@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501190921.GA120430@art_vandelay
On a failed resume we may experience unrecoverable errors. Plumb the error code
through to actually let the driver fail. On a reverse-prime setup this helps the
drm subsystem to at least recover the integrated gpu.
This can especially happen with secboot timing out, leaving the hardware in a
non-functioning state.
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There is a spelling mistake in a nvkm_debug message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For a while, we've had the problem of i2c bus access not grabbing
a runtime PM ref when it's being used in userspace by i2c-dev, resulting
in nouveau spamming the kernel log with errors if anything attempts to
access the i2c bus while the GPU is in runtime suspend. An example:
[ 130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff
Since the GPU is in runtime suspend, the MMIO region that the i2c bus is
on isn't accessible. On x86, the standard behavior for accessing an
unavailable MMIO region is to just return ~0.
Except, that turned out to be a lie. While computers with a clean
concious will return ~0 in this scenario, some machines will actually
completely hang a CPU on certian bad MMIO accesses. This was witnessed
with someone's Lenovo ThinkPad P50, where sensors-detect attempting to
access the i2c bus while the GPU was suspended would result in a CPU
hang:
CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1
Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017
RIP: 0010:ioread32+0x2b/0x30
Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3
48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f
40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48
RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13
RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186
RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4
RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7
R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000
R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000
FS: 00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
g94_i2c_aux_xfer+0x326/0x850 [nouveau]
nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau]
__i2c_transfer+0x14b/0x620
i2c_smbus_xfer_emulated+0x159/0x680
? _raw_spin_unlock_irqrestore+0x1/0x60
? rt_mutex_slowlock.constprop.0+0x13d/0x1e0
? __lock_is_held+0x59/0xa0
__i2c_smbus_xfer+0x138/0x5a0
i2c_smbus_xfer+0x4f/0x80
i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev]
i2cdev_ioctl+0x1db/0x2c0 [i2c_dev]
do_vfs_ioctl+0x408/0x750
ksys_ioctl+0x5e/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x60/0x1e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f25317f546b
Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b
RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003
RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0
R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80
R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0
watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438]
Yikes! While I wanted to try to make it so that accessing an i2c bus on
nouveau would wake up the GPU as needed, airlied pointed out that pretty
much any usecase for userspace accessing an i2c bus on a GPU (mainly for
the DDC brightness control that some displays have) is going to only be
useful while there's at least one display enabled on the GPU anyway, and
the GPU never sleeps while there's displays running.
Since teaching the i2c bus to wake up the GPU on userspace accesses is a
good deal more difficult than it might seem, mostly due to the fact that
we have to use the i2c bus during runtime resume of the GPU, we instead
opt for the easiest solution: don't let userspace access i2c busses on
the GPU at all while it's in runtime suspend.
Changes since v1:
* Also disable i2c busses that run over DP AUX
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit 3a6536c51d ("drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE")
added a definition of ACPI_VIDEO_NOTIFY_PROBE because <acpi/video.h> didn't
supply one. Later, commit eff4a751cc ("ACPI / video: Move
ACPI_VIDEO_NOTIFY_* defines to acpi/video.h") moved ACPI_VIDEO_NOTIFY_PROBE
and other definitions to <acpi/video.h>, so the copy in nouveau_display.c
is now unnecessary.
Remove the unnecessary definition from nouveau_display.c.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the BAR initialization failed it may leave the vmm structure in an
unitialized state, leading to a null-pointer-dereference when the vmm is
dereferenced during teardown.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Check bar1's new vmm creation return value for errors.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The 50 ms default timeout waiting for vblanks is too small
for the first vblank from the ST-Ericsson MCDE display
controller over DSI. Presumably this is because the DSI
display is command-mode only and the state machine will
take some time setting up its state for the first display
update, and we hit a timeout. 100 ms makes it pass without
problems.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430093746.26485-1-linus.walleij@linaro.org
WaEnableStateCacheRedirectToCS context workaround configures the L3 cache
to benefit 3d workloads but media has different requirements.
Remove the workaround and whitelist the register to allow any userspace
configure the behaviour to their liking.
v2:
* Remove the workaround apart from adding the whitelist.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: kevin.ma@intel.com
Cc: xiaogang.li@intel.com
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418100634.984-1-tvrtko.ursulin@linux.intel.com
Fixes: f63c7b4880 ("drm/i915/icl: WaEnableStateCacheRedirectToCS")
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[tursulin: Anuj reported no GPU hangs or performance regressions with old
Mesa on patched kernel.]
(cherry picked from commit 0fc2273b9a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Power down the engine also along with disabling its DPM
functionality.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU will use this interface to power down the VCE engine.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pre-DCE12 needs special treatment for BTR / low framerate
compensation for more stable behaviour:
According to comments in the code and some testing on DCE-8
and DCE-11, DCE-11 and earlier only apply VTOTAL_MIN/MAX
programming with a lag of one frame, so the special BTR hw
programming for intermediate fixed duration frames must be
done inside the current frame at flip submission in atomic
commit tail, ie. one vblank earlier, and the fixed refresh
intermediate frame mode must be also terminated one vblank
earlier on pre-DCE12 display engines.
To achieve proper termination on < DCE-12 shift the point
when the switch-back from fixed vblank duration to variable
vblank duration happens from the start of VBLANK (vblank irq,
as done on DCE-12+) to back-porch or end of VBLANK (handled
by vupdate irq handler). We must leave the switch-back code
inside VBLANK irq for DCE12+, as before.
Doing this, we get much better behaviour of BTR for up-sweeps,
ie. going from short to long frame durations (~high to low fps)
and for constant framerate flips, as tested on DCE-8 and
DCE-11. Behaviour is still not quite as good as on DCN-1
though.
On down-sweeps, going from long to short frame durations
(low fps to high fps) < DCE-12 is a little bit improved,
although by far not as much as for up-sweeps and constant
fps.
v2: Fix some wrong locking, as pointed out by Nicholas.
v3: Simplify if-condition in vupdate-irq - nit by Nicholas.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The comparison of inserted_frame_duration_in_us against a
duration calculated from max_refresh_in_uhz is both wrong
in its math and not needed, as the min_duration_in_us value
is already cached in in_out_vrr for reuse. No need to
recalculate it wrongly at each invocation.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RGB565 support isn't restricted to just the primary plane in DC, so
also expose support for it on overlays.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: David Francis <david.francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Originally we did the amdgpu_dm_handle_vrr_transition call before
interrupts were enabled. After the interrupt toggling logic was
moved around for support enabling CRTCs with no primary planes
active this was no longer being called in the case where there
wasn't a modeset.
This fixes failures in igt@kms_vrr@* with error
"Timed out: Waiting for vblank event".
[How]
Shift them back into the loop that always ran before interrupts were
enabled.
Pull out the logic that updated VRR state into the same loop since
there's no reason these need to be split.
In the case where we're going from VRR off, no planes to VRR on, some
active planes we'll still be covered for having the VRR vupdate
handler enabled - vblank will be re-enabled at this point, it will
see that VRR is active and set the vupdate interrupt on there.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refactor dp vendor parsing int to a new function, and call it before
get_active_converter_info().
Also, add a flag to skip parsing of Display ID 2.0. Some devices fail on
readind DID2, but we shouldn't fail EDID read because of it. Add this
flag to facilitate the logic.
Signed-off-by: John Barberiz <John.Barberiz@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Different HW will need to init HUBP differently. For now, add a vtable
entry, and hook a NO-OP for DCN1.
In addition, future HW will need to access the HUBPREQ_DEBUG register
for hubp_init. Add it to the reg list.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
james qian wang (Arm Technology China)
Daniel Vetter
Jagadeesh Pagadala
Andres Rodriguez
Dave Airlie
Robert Foss
Jani Nikula
Chia-I Wu
Fabien Dessenne
Robin Murphy
Tomeu Vizoso
Sean Paul
Lucas Stach
Andrey Grodzovsky
Christian König
Lionel Landwerlin
Tobias Klausmann
Colin Ian King
Lyude Paul
Bjorn Helgaas
Jon Derrick
Linus Walleij
Tvrtko Ursulin
Evan Quan
Mario Kleiner
Nicholas Kazlauskas
John Barberiz
Charlene Liu