Граф коммитов

495411 Коммитов

Автор SHA1 Сообщение Дата
Michael S. Tsirkin 46506da5f3 virtio_pci: add an option to disable legacy driver
Useful for testing device virtio 1 compatibility.
Based on patch by Rusty - couldn't resist putting
that flying car joke in there!

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:59 +10:30
Michael S. Tsirkin 0327642337 virtio_pci: drop Kconfig warnings
The ABI *is* stable, and has been for a while now.
Drop Kconfig warning saying that it's not guaranteed
to work.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:59 +10:30
Michael S. Tsirkin b2a6d51ddf virtio_pci: Kconfig grammar fix
This drivers -> this driver.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:58 +10:30
Michael S. Tsirkin 3c7322405d virtio_rng: drop extra empty line
makes code look a bit prettier.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:58 +10:30
Michael S. Tsirkin 43b4f721ce virtio_ring: coding style fix
Most of our code has
struct foo {
}

Fix one instances where ring is inconsistent.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:57 +10:30
Michael S. Tsirkin bb6ec57600 virtio_blk: coding style fixes
Most of our code has
struct foo {
}

Fix two instances where blk is inconsistent.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:57 +10:30
Michael S. Tsirkin 25e65e4efc virtio_balloon: coding style fixes
Most of our code has
struct foo {
}

Fix two instances where balloon is inconsistent.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:56 +10:30
Michael S. Tsirkin d3f5f06560 virtio_pci_modern: support devices with no config
Virtio 1.0 spec lists device config as optional.
Set get/set callbacks to NULL. Drivers can check that
and fail gracefully.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:55 +10:30
Michael S. Tsirkin 3909213cfd virtio_pci_modern: reduce number of mappings
We don't know the # of VQs that drivers are going to use so it's hard to
predict how much memory we'll need to map. However, the relevant
capability does give us an upper limit.
If that's below a page, we can reduce the number of required
mappings by mapping it all once ahead of the time.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:55 +10:30
Rusty Russell 89461c4a12 virtio_pci: macros for PCI layout offsets
QEMU wants it, so why not?  Trust, but verify.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-01-21 16:28:54 +10:30
Michael S. Tsirkin 1fcf0512c9 virtio_pci: modern driver
Lightly tested against qemu.

One thing *not* implemented here is separate mappings
for descriptor/avail/used rings. That's nice to have,
will be done later after we have core support.

This also exposes the PCI layout to userspace, and
adds macros for PCI layout offsets:

QEMU wants it, so why not?  Trust, but verify.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-01-21 16:28:53 +10:30
Rusty Russell 71d70c266c virtio-pci: define layout for virtio 1.0
Based on patches by Michael S. Tsirkin <mst@redhat.com>, but I found it
hard to follow so changed to use structures which are more
self-documenting.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-01-21 16:28:51 +10:30
Michael S. Tsirkin ff31d2e285 virtio_pci: move probe/remove code to common
Most of initialization is device-independent.
Let's move it to common.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:51 +10:30
Sasha Levin 2bd56afd44 virtio_pci: drop useless del_vqs call
Device VQs were getting freed twice: once in every device's removal
functions, and then again in virtio_pci_legacy_remove().  The ones in
devices are called first, so drop the useless second call.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:50 +10:30
Michael S. Tsirkin 8cfc99b583 s390: add pci_iomap_range
Virtio drivers should map the part of the range they need, not
necessarily all of it.
To this end, support mapping ranges within BAR on s390.
Since multiple ranges can now be mapped within a BAR, we keep track of
the number of mappings created, and only clear out the mapping for a BAR
when this number reaches 0.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:49 +10:30
Michael S. Tsirkin eb29d8d2aa pci: add pci_iomap_range
Virtio drivers should map the part of the BAR they need, not necessarily
all of it.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:49 +10:30
Michael S. Tsirkin 54cfe08b5f mn10300: drop dead code
pci-iomap.c was (apparently, mistakenly) reintroduced as part of
commit 83c2dc15ce
    MN10300: Handle cacheable PCI regions in pci_iomap()
probably as side-effect of forward-porting the patch
from an old kernel.

It's not really needed: the generic pci_iomap does the right thing here.

The new file isn't compiled so it's safe to drop.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: trivial@kernel.org
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:48 +10:30
Michael S. Tsirkin 2d9becc1e0 virtio/balloon: verify device has config space
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/balloon needs config space access so make it
fail gracefully if not there.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:48 +10:30
Michael S. Tsirkin 8cab3cd6ad virtio/scsi: verify device has config space
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/scsi needs config space access so make it
fail gracefully if not there.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:47 +10:30
Michael S. Tsirkin 6ba422489b virtio/net: verify device has config space
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/net needs config space access so make it
fail gracefully if not there.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:47 +10:30
Michael S. Tsirkin 011f0e7a69 virtio/console: verify device has config space
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/console needs config space access so make it
fail gracefully if not there.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:46 +10:30
Michael S. Tsirkin a4379fd841 virtio/blk: verify device has config space
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/blk needs config space access so make it
fail gracefully if not there.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:45 +10:30
Michael S. Tsirkin 7754f53e94 virtio/9p: verify device has config space
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/9p needs config space access so make it
fail gracefully if not there.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:45 +10:30
Michael S. Tsirkin 7f870c81a0 virtio_pci: drop virtio_config dependency
virtio_pci does not depend on virtio_config:
let's not include it, users can pull it in as necessary.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21 16:28:44 +10:30
Linus Torvalds b97f880c83 Merge branch 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:

 - Bartlomiej will be co-maintaining PATA portion of libata.  git
   workflow will stay the same.

 - sata_sil24 wasn't happy with tag ordered submission.  An option to
   restore the old tag allocation behavior is implemented for sil24.

 - a very old race condition in PIO host state machine which can trigger
   BUG fixed.

 - other driver-specific changes

* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: prevent HSM state change race between ISR and PIO
  libata: allow sata_sil24 to opt-out of tag ordered submission
  ata: pata_at91: depend on !ARCH_MULTIPLATFORM
  ahci: Remove Device ID for Intel Sunrise Point PCH
  ahci: Use dev_info() to inform about the lack of Device Sleep support
  libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  sata_dwc_460ex: fix resource leak on error path
  ata: add MAINTAINERS entry for libata PATA drivers
  libata: clean up MAINTAINERS entries
  libata: export ata_get_cmd_descript()
  ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode command.
  ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver.
2015-01-21 07:54:16 +12:00
Linus Torvalds d4b2d0061d Merge branch 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
 "The xfs folks have been running into weird and very rare lockups for
  some time now.  I didn't think this could have been from workqueue
  side because no one else was reporting it.  This time, Eric had a
  kdump which we looked into and it turned out this actually was a
  workqueue bug and the bug has been there since the beginning of
  concurrency managed workqueue.

  A worker pool ensures forward progress of the workqueues associated
  with it by always having at least one worker reserved from executing
  work items.  When the pool is under contention, the idle one tries to
  create more workers for the pool and if that doesn't succeed quickly
  enough, it calls the rescuers to the pool.

  This logic had a subtle race condition in an early exit path.  When a
  worker invokes this manager function, the function may return %false
  indicating that the caller may proceed to executing work items either
  because another worker is already performing the role or conditions
  have changed and the pool is no longer under contention.

  The latter part depended on the assumption that whether more workers
  are necessary or not remains stable while the pool is locked; however,
  pool->nr_running (concurrency count) may change asynchronously and it
  getting bumped from zero asynchronously could send off the last idle
  worker to execute work items.

  The race window is fairly narrow, and, even when it gets triggered,
  the pool deadlocks iff if all work items get blocked on pending work
  items of the pool, which is highly unlikely but can be triggered by
  xfs.

  The patch removes the race window by removing the early exit path,
  which doesn't server any purpose anymore anyway"

* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix subtle pool management issue which can stall whole worker_pool
2015-01-21 07:51:46 +12:00
Linus Torvalds 06efe0e540 Pin control fixes for the v3.19 series:
- Fix two deadlocks around the pin control mutexes,
   a long-standing issue that manifest itself in
   plug/unplug of pin controllers. (Tagged for stable.)
 
 - Handle an error path with zero functions in the
   Qualcomm pin controller.
 
 - Drop a bogus second GPIO chip added in the Lantiq
   driver.
 
 - Fix sudden IRQ loss on Rockchip pin controllers.
 
 - Register the GIT tree in MAINTAINERS.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUvhsCAAoJEEEQszewGV1zZMoP/AoewI2od036rhGKD5IqH1/F
 6khikDo6e3TbAHdx4iGWVzzFOK+V66lc4eokTIMDfxiaovcSBNqYBVdaIM/xunc0
 S7jxTGp1EdSMqyYv6L7h+EycDAZ/sfHobOWhhgV38o5fWuGI5fGzIC2Pj0kWU/vr
 sMInof+dJeSPLLYMMruQpik08tku5tuGHlPnA8knRCkZxHtHWwqYiU+zl2gfDfvO
 uC0cQm+rXtUn/m6ua0pRSjujZDyxVOkLiBHk01qfqNfCDlBgg4J9wI+HE08HWaMC
 lr03oV4nZQ91aEih16g4UgsOGnxHfDZS6EU6alCWIyUPs3LEwZ07twCk1lLAjkAu
 Jswx8bZCmbndUfcnoImgtJLT+7zU8utBpbhzHi5rmoHF0/pVA/estk1lRGanid1B
 OHg3HZv30T9xdVvZCVHUD+O4b/8HQWB8EJte5yt3Qs+B6M/N3Fw1o5+fgCTXR9C1
 zTRVu3VIOOX8IuY3rJ7DCme/b/N2kAkGAckbnOSoTx1MO4ECIAR0CCiF2eKzjwi6
 xCAeA+4aEsJXAQQqMY4UBdpgdXtc9hRW5C4iMjcbPicoZqgAJhL8kyIyuJjOgHDy
 4l6hFhFaLGEIzWMfpP7wi9y/CyZabeKq30UgInJu1GJsj7H/ZE7aPSv/vjrGyEh6
 4ukizhEn8NEhVm15SUbg
 =YGym
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Here is a (hopefully final) slew of pin control fixes for the v3.19
  series.  The deadlock fix is kind of serious and tagged for stable,
  the rest is business as usual.

   - Fix two deadlocks around the pin control mutexes, a long-standing
     issue that manifest itself in plug/unplug of pin controllers.
     (Tagged for stable.)

   - Handle an error path with zero functions in the Qualcomm pin
     controller.

   - Drop a bogus second GPIO chip added in the Lantiq driver.

   - Fix sudden IRQ loss on Rockchip pin controllers.

   - Register the GIT tree in MAINTAINERS"

* tag 'pinctrl-v3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: MAINTAINERS: add git tree reference
  pinctrl: qcom: Don't iterate past end of function array
  pinctrl: lantiq: remove bogus of_gpio_chip_add
  pinctrl: Fix two deadlocks
  pinctrl: rockchip: Avoid losing interrupts when supporting both edges
2015-01-20 21:23:41 +12:00
Linus Torvalds eef8f4c2ac Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Socket addresses returned in the error queue need to be fully
    initialized before being passed on to userspace, fix from Willem de
    Bruijn.

 2) Interrupt handling fixes to davinci_emac driver from Tony Lindgren.

 3) Fix races between receive packet steering and cpu hotplug, from Eric
    Dumazet.

 4) Allowing netlink sockets to subscribe to unknown multicast groups
    leads to crashes, don't allow it.  From Johannes Berg.

 5) One to many socket races in SCTP fixed by Daniel Borkmann.

 6) Put in a guard against the mis-use of ipv6 atomic fragments, from
    Hagen Paul Pfeifer.

 7) Fix promisc mode and ethtool crashes in sh_eth driver, from Ben
    Hutchings.

 8) NULL deref and double kfree fix in sxgbe driver from Girish K.S and
    Byungho An.

 9) cfg80211 deadlock fix from Arik Nemtsov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
  s2io: use snprintf() as a safety feature
  r8152: remove sram_read
  r8152: remove generic_ocp_read before writing
  bgmac: activate irqs only if there is nothing to poll
  bgmac: register napi before the device
  sh_eth: Fix ethtool operation crash when net device is down
  sh_eth: Fix promiscuous mode on chips without TSU
  ipv6: stop sending PTB packets for MTU < 1280
  net: sctp: fix race for one-to-many sockets in sendmsg's auto associate
  genetlink: synchronize socket closing and family removal
  genetlink: disallow subscribing to unknown mcast groups
  genetlink: document parallel_ops
  net: rps: fix cpu unplug
  net: davinci_emac: Add support for emac on dm816x
  net: davinci_emac: Fix ioremap for devices with MDIO within the EMAC address space
  net: davinci_emac: Fix incomplete code for getting the phy from device tree
  net: davinci_emac: Free clock after checking the frequency
  net: davinci_emac: Fix runtime pm calls for davinci_emac
  net: davinci_emac: Fix hangs with interrupts
  ip: zero sockaddr returned on error queue
  ...
2015-01-20 18:19:31 +12:00
Linus Torvalds 2262889091 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
 "This fixes a regression that arose from the change to add a crypto
  prefix to module names which was done to prevent the loading of
  arbitrary modules through the Crypto API.

  In particular, a number of modules were missing the crypto prefix
  which meant that they could no longer be autoloaded"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: add missing crypto module aliases
2015-01-20 18:17:34 +12:00
Dan Carpenter a8c1d28ac3 s2io: use snprintf() as a safety feature
"sp->desc[i]" has 25 characters.  "dev->name" has 15 characters.  If we
used all 15 characters then the sprintf() would overflow.

I changed the "sprintf(sp->name, "%s Neterion %s"" to snprintf(), as
well, even though it can't overflow just to be consistent.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 19:42:21 -05:00
David S. Miller ef5a1ba145 Merge branch 'r8152'
Hayes Wang says:

====================
r8152: couldn't read OCP_SRAM_DATA

Read OCP_SRAM_DATA would read additional bytes and may let
the hw abnormal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 16:16:36 -05:00
hayeswang b4d99def09 r8152: remove sram_read
Read OCP register 0xa43a~0xa43b would clear some flags which the hw
would use, and it may let the device lost. However, the unit of
reading is 4 bytes. That is, it would read 0xa438~0xa43b when calling
sram_read() to read OCP_SRAM_DATA.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 16:16:32 -05:00
hayeswang 8cb3db24c8 r8152: remove generic_ocp_read before writing
For ocp_write_word() and ocp_write_byte(), there is a generic_ocp_read()
which is used to read the whole 4 byte data, keep the unchanged bytes,
and modify the expected bytes. However, the "byen" could be used to
determine which bytes of the 4 bytes to write, so the action could be
removed.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 16:16:32 -05:00
David S. Miller e60bf80615 Merge branch 'bgmac'
Hauke Mehrtens says:

====================
bgmac: some fixes to napi usage

I compared the napi documentation with the bgmac driver and found some
problems in that driver. These two patches should fix the problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 16:00:02 -05:00
Hauke Mehrtens 43f159c60a bgmac: activate irqs only if there is nothing to poll
IRQs should only get activated when there is nothing to poll in the
queue any more and to after every poll.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 15:59:57 -05:00
Hauke Mehrtens 6216642f20 bgmac: register napi before the device
napi should get registered before the netdev and not after.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 15:59:57 -05:00
David S. Miller 852c5d9c98 Merge branch 'sh_eth'
Ben Hutchings says:

====================
sh_eth fixes

I'm currently looking at Ethernet support on the R-Car H2 chip,
reviewing and testing the sh_eth driver.  Here are fixes for two fairly
obvious bugs in the driver; I will probably have some more later.

These are not tested on any of the other supported chips.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 15:37:44 -05:00
Ben Hutchings 4f9dce230b sh_eth: Fix ethtool operation crash when net device is down
The driver connects and disconnects the PHY device whenever the
net device is brought up and down.  The ethtool get_settings,
set_settings and nway_reset operations will dereference a null
or dangling pointer if called while it is down.

I think it would be preferable to keep the PHY connected, but there
may be good reasons not to.

As an immediate fix for this bug:
- Set the phydev pointer to NULL after disconnecting the PHY
- Change those three operations to return -ENODEV while the PHY is
  not connected

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 15:37:40 -05:00
Ben Hutchings b37feed7c2 sh_eth: Fix promiscuous mode on chips without TSU
Currently net_device_ops::set_rx_mode is only implemented for
chips with a TSU (multiple address table).  However we do need
to turn the PRM (promiscuous) flag on and off for other chips.

- Remove the unlikely() from the TSU functions that we may safely
  call for chips without a TSU
- Make setting of the MCT flag conditional on the tsu capability flag
- Rename sh_eth_set_multicast_list() to sh_eth_set_rx_mode() and plumb
  it into both net_device_ops structures
- Remove the previously-unreachable branch in sh_eth_rx_mode() that
  would otherwise reset the flags to defaults for non-TSU chips

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 15:37:40 -05:00
Hagen Paul Pfeifer 9d289715eb ipv6: stop sending PTB packets for MTU < 1280
Reduce the attack vector and stop generating IPv6 Fragment Header for
paths with an MTU smaller than the minimum required IPv6 MTU
size (1280 byte) - called atomic fragments.

See IETF I-D "Deprecating the Generation of IPv6 Atomic Fragments" [1]
for more information and how this "feature" can be misused.

[1] https://tools.ietf.org/html/draft-ietf-6man-deprecate-atomfrag-generation-00

Signed-off-by: Fernando Gont <fgont@si6networks.com>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 14:52:07 -05:00
David Jeffery ce75145267 libata: prevent HSM state change race between ISR and PIO
It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to
HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE
and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().

This problem is hard to reproduce making this patch hard to verify, but this
fix will prevent the race.

I have not been able to reproduce the problem, but here is a crash dump from
a 2.6.32 kernel.

On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE:

crash> struct ata_port.hsm_task_state ffff881c1121c000
  hsm_task_state = 0

Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(),
which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value.

PID: 11053  TASK: ffff8816e846cae0  CPU: 0   COMMAND: "sshd"
 #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b
 #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92
 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510
 #3 [ffff88008ba03ac0] die at ffffffff81010e0b
 #4 [ffff88008ba03af0] do_trap at ffffffff8152ad74
 #5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95
 #6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b
    [exception RIP: ata_sff_hsm_move+317]
    RIP: ffffffff813a77ad  RSP: ffff88008ba03ca0  RFLAGS: 00010097
    RAX: 0000000000000000  RBX: ffff881c1121dc60  RCX: 0000000000000000
    RDX: ffff881c1121dd10  RSI: ffff881c1121dc60  RDI: ffff881c1121c000
    RBP: ffff88008ba03d00   R8: 0000000000000000   R9: 000000000000002e
    R10: 000000000001003f  R11: 000000000000009b  R12: ffff881c1121c000
    R13: 0000000000000000  R14: 0000000000000050  R15: ffff881c1121dd78
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd
 #8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e
 #9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0
--- <IRQ stack> ---
    [exception RIP: pipe_poll+48]
    RIP: ffffffff81192780  RSP: ffff880f26d459b8  RFLAGS: 00000246
    RAX: 0000000000000000  RBX: ffff880f26d459c8  RCX: 0000000000000000
    RDX: 0000000000000001  RSI: 0000000000000000  RDI: ffff881a0539fa80
    RBP: ffffffff8100bb8e   R8: ffff8803b23324a0   R9: 0000000000000000
    R10: ffff880f26d45dd0  R11: 0000000000000008  R12: ffffffff8109b646
    R13: ffff880f26d45948  R14: 0000000000000246  R15: 0000000000000246
    ORIG_RAX: ffffffffffffff10  CS: 0010  SS: 0018
    RIP: 00007f26017435c3  RSP: 00007fffe020c420  RFLAGS: 00000206
    RAX: 0000000000000017  RBX: ffffffff8100b072  RCX: 00007fffe020c45c
    RDX: 00007f2604a3f120  RSI: 00007f2604a3f140  RDI: 000000000000000d
    RBP: 0000000000000000   R8: 00007fffe020e570   R9: 0101010101010101
    R10: 0000000000000000  R11: 0000000000000246  R12: 00007fffe020e5f0
    R13: 00007fffe020e5f4  R14: 00007f26045f373c  R15: 00007fffe020e5e0
    ORIG_RAX: 0000000000000017  CS: 0033  SS: 002b

Somewhere between the ata_sff_hsm_move() check and the ata_sff_host_intr() check, the value changed.
On examining the other cpus to see what else was running, another cpu was running the error handler
routines:

PID: 326    TASK: ffff881c11014aa0  CPU: 1   COMMAND: "scsi_eh_1"
 #0 [ffff88008ba27e90] crash_nmi_callback at ffffffff8102fee6
 #1 [ffff88008ba27ea0] notifier_call_chain at ffffffff8152d515
 #2 [ffff88008ba27ee0] atomic_notifier_call_chain at ffffffff8152d57a
 #3 [ffff88008ba27ef0] notify_die at ffffffff810a154e
 #4 [ffff88008ba27f20] do_nmi at ffffffff8152b1db
 #5 [ffff88008ba27f50] nmi at ffffffff8152aaa0
    [exception RIP: _spin_lock_irqsave+47]
    RIP: ffffffff8152a1ff  RSP: ffff881c11a73aa0  RFLAGS: 00000006
    RAX: 0000000000000001  RBX: ffff881c1121deb8  RCX: 0000000000000000
    RDX: 0000000000000246  RSI: 0000000000000020  RDI: ffff881c122612d8
    RBP: ffff881c11a73aa0   R8: ffff881c17083800   R9: 0000000000000000
    R10: 0000000000000000  R11: 0000000000000000  R12: ffff881c1121c000
    R13: 000000000000001f  R14: ffff881c1121dd50  R15: ffff881c1121dc60
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
--- <NMI exception stack> ---
 #6 [ffff881c11a73aa0] _spin_lock_irqsave at ffffffff8152a1ff
 #7 [ffff881c11a73aa8] ata_exec_internal_sg at ffffffff81396fb5
 #8 [ffff881c11a73b58] ata_exec_internal at ffffffff81397109
 #9 [ffff881c11a73bd8] atapi_eh_request_sense at ffffffff813a34eb

Before it tried to acquire a spinlock, ata_exec_internal_sg() called ata_sff_flush_pio_task().
This function will set ap->hsm_task_state to HSM_ST_IDLE, and has no locking around setting this
value. ata_sff_flush_pio_task() can then race with the interrupt handler and potentially set
HSM_ST_IDLE at a fatal moment, which will trigger a kernel BUG.

v2: Fixup comment in ata_sff_flush_pio_task()

tj: Further updated comment.  Use ap->lock instead of shost lock and
    use the [un]lock_irq variant instead of the irqsave/restore one.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-01-19 14:11:23 -05:00
Dan Williams 72dd299d50 libata: allow sata_sil24 to opt-out of tag ordered submission
Ronny reports: https://bugzilla.kernel.org/show_bug.cgi?id=87101
    "Since commit 8a4aeec8d "libata/ahci: accommodate tag ordered
    controllers" the access to the harddisk on the first SATA-port is
    failing on its first access. The access to the harddisk on the
    second port is working normal.

    When reverting the above commit, access to both harddisks is working
    fine again."

Maintain tag ordered submission as the default, but allow sata_sil24 to
continue with the old behavior.

Cc: <stable@vger.kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Reported-by: Ronny Hegewald <Ronny.Hegewald@online.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-19 09:10:07 -05:00
Linus Walleij dbe752a34d pinctrl: MAINTAINERS: add git tree reference
Reference my pinctrl GIT tree @kernel.org

Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-19 11:27:19 +01:00
Stephen Boyd bcd53f858d pinctrl: qcom: Don't iterate past end of function array
Timur reports that this code crashes if nfunctions is 0. Fix the
loop iteration to only consider valid elements of the functions
array.

Reported-by: Timur Tabi <timur@codeaurora.org>
Cc: Pramod Gurav <pramod.gurav@smartplayin.com>
Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Cc: Andy Gross <agross@codeaurora.org>
Fixes: 327455817a "pinctrl: qcom: Add support for reset for apq8064"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-19 11:17:45 +01:00
Linus Torvalds b62a9c2058 A slew of fixes dealing with some irritating bugs (non-regressions)
that have been around forever in the GPIO subsystem, most of them
 also tagged for stable:
 
 - A large slew of fixes from Johan Hovold who is finally testing and
   reviewing the removal path of the GPIO drivers.
 
 - Fix of_get_named_gpiod_flags() so it works as expected.
 
 - Fix an IRQ handling bug in the crystalcove driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUu4HCAAoJEEEQszewGV1zx9wP/3oREk/os8ZvWbbXnsLiJ2lf
 v7Oa0kZtIqS5zhE6MOmjEuMoKJBvIjv89n3xwydXfWN9SImhJzjYkhkVYMs8zysh
 li0AgmVzYHM3+/cuX/qtyV57WhP5WNW3B4j5WXdDQEDMvPhH3Rdbgke2cgVsuAfm
 Z+yddAwy18iqPaCy5BKc4JbHH5NWF7ntkGD5Loryt0VPZeJFiXvf6Y1qCpxRXe0k
 acj03QOBiwGJFCYGyXOJn8wjjuM/vLJ+XFchF144EUR6ECKYoMbnn+JjQURaWYrq
 ubc+B0A5fwsmWBwKcvRfPfgDwwnm3BNFK0I1R/ZvRJWRCwCxsuUmW2gnpi9PlD/G
 iQ0aCudrqBQfOLBRkDrtSMpVnD3A6pxRWx7cHAe24mx6ORNXs1EpmSgjA2mk08LL
 hr1w9tp0L4huGQ/5b9P7S6Oz+KTyH+OBQU6VKxBxJ24raDVigkSXe9YGXlbupruB
 B7JpgEdzvHp1YcBEYB8Bu+p89/NdFN4VdoSwnLKttFaPxIX+i1J4PyZaGNIhB8HI
 flIapWbbcQ4jJA9Ym7r7Vc/i3ATBoq+znq/VPNNlfPu767GLukyln3KvFHpBJVd4
 JR3zCuWwlsgz9uDPSwl1h6gIeCFiXGvxk9LWBcbjTdDKZzE4i0rqpfPU36WSFeyP
 NKUck+bcPcqKuo0EoDU6
 =ekXq
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Here is a set of fixes that mainly appeared when Johan Hovold started
  exercising the removal path of the GPIO library, dealing with
  hotplugging of GPIO controllers. Details from tag:

  A slew of fixes dealing with some irritating bugs (non-regressions)
  that have been around forever in the GPIO subsystem, most of them also
  tagged for stable:

   - A large slew of fixes from Johan Hovold who is finally testing and
     reviewing the removal path of the GPIO drivers.

   - Fix of_get_named_gpiod_flags() so it works as expected.

   - Fix an IRQ handling bug in the crystalcove driver"

* tag 'gpio-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: of: Correct error handling in of_get_named_gpiod_flags
  gpio: sysfs: fix gpio attribute-creation race
  gpio: sysfs: fix gpio device-attribute leak
  gpio: sysfs: fix gpio-chip device-attribute leak
  gpio: unregister gpiochip device before removing it
  gpio: fix sleep-while-atomic in gpiochip_remove
  gpio: fix memory leak and sleep-while-atomic
  gpio: clean up gpiochip_add error handling
  gpio: fix gpio-chip list corruption
  gpio: fix memory and reference leaks in gpiochip_add error path
  gpio: crystalcove: use handle_nested_irq
2015-01-19 05:03:13 +12:00
Linus Torvalds 66893885bb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: uinput - fix ioctl nr overflow for UI_GET_SYSNAME/VERSION
  Input: I8042 - add Acer Aspire 7738 to the nomux list
  Input: elantech - support new ICs types for version 4
  Input: i8042 - reset keyboard to fix Elantech touchpad detection
  MAINTAINERS: remove Dmitry Torokhov's alternate address
2015-01-19 04:55:23 +12:00
Linus Torvalds ec6f34e5b5 Linux 3.19-rc5 2015-01-18 18:02:20 +12:00
Linus Torvalds d0ac5d8e67 ARM: SoC fixes
We've been sitting on our fixes branch for a while, so this batch is
 unfortunately on the large side.
 
 A lot of these are tweaks and fixes to device trees, fixing various bugs
 around clocks, reg ranges, etc. There's also a few defconfig updates
 (which are on the late side, no more of those).
 
 All in all the diffstat is bigger than ideal at this time, but the nothing
 in here seems particularly risky.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUudSXAAoJEIwa5zzehBx3WmkP/RDPvMHGllPxZ7jDTBK2scGY
 U0zg3zeIKbJANke8BZNaYNnYmLtvOcwiqA80CsOE23+l1zv2tSf8v/je1dENFmzr
 rHahs1ZAQ2fv5k1NCazOxkeTcu5frcDujoHkDVo2b4ofLzhlTYP5UEkapLBdihrB
 KLGCXynjmMLXDViLw7mhaM0gZOxyyO3CTaBUJeLPWqTpy26LliFdJfDxe+oa+dx9
 CX3YbfKKHJ9ENFwHB6oLk0cQy1eLieWTcYJk06wUsCdcsoZmWySiaWpLFb9MIyoT
 eLqT4k8cNMNdB49GNvwZz7NxbG9RetzNd5Ixglr9NodB3mNxpW3PyU3lxrRUSc4X
 6Ij9rgFWwfRKlmCFZnHF5mxSx7z4NoBQJWsVBB4EFjfyX8eVkZ+Gu82gK6V/2HNa
 vpMAqmNCM99VXx4nsoiNBpYVShAgXxC0r8D5MKNaITZ/Z7tarJe/M2JDnxyR+r5L
 DCyjj3swQ21hKMv8FFXkOSfXir9v9bQg5KMeA7HNPCsKjvcWxpHGQdVZVkGQ3D8J
 umFsForMr3AY0G+HtmP+ntVEEB8g8AiTQgiC7gyfAKhJhjMd/vYmJdsVvsXk2SL/
 yh1y08f46FFasbVR2TTYPt6njj4FdcbDDsB5ks2gBpkb4qjutoMlNRDOYbfoN7eX
 VTacVVRJy4ftSLeNnN70
 =lJPi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "We've been sitting on our fixes branch for a while, so this batch is
  unfortunately on the large side.

  A lot of these are tweaks and fixes to device trees, fixing various
  bugs around clocks, reg ranges, etc.  There's also a few defconfig
  updates (which are on the late side, no more of those).

  All in all the diffstat is bigger than ideal at this time, but nothing
  in here seems particularly risky"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  reset: sunxi: fix spinlock initialization
  ARM: dts: disable CCI on exynos5420 based arndale-octa
  drivers: bus: check cci device tree node status
  ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288
  ARM: nomadik: fix up leftover device tree pins
  ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
  ARM: at91/dt: sam9263: Add missing clocks to lcdc node
  ARM: at91: sama5d3: dt: correct the sound route
  ARM: at91/dt: sama5d4: fix the timer reg length
  ARM: exynos_defconfig: Enable LM90 driver
  ARM: exynos_defconfig: Enable options for display panel support
  arm: dts: Use pmu_system_controller phandle for dp phy
  ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
  ARM: dts: berlin: correct BG2Q's SM GPIO location.
  ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
  ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
  ARM: dts: Revert disabling of smc91x for n900
  ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
  ARM: dts: dra7-evm: fix qspi device tree partition size
  ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
  ...
2015-01-18 18:00:40 +12:00
Daniel Borkmann 2061dcd6bf net: sctp: fix race for one-to-many sockets in sendmsg's auto associate
I.e. one-to-many sockets in SCTP are not required to explicitly
call into connect(2) or sctp_connectx(2) prior to data exchange.
Instead, they can directly invoke sendmsg(2) and the SCTP stack
will automatically trigger connection establishment through 4WHS
via sctp_primitive_ASSOCIATE(). However, this in its current
implementation is racy: INIT is being sent out immediately (as
it cannot be bundled anyway) and the rest of the DATA chunks are
queued up for later xmit when connection is established, meaning
sendmsg(2) will return successfully. This behaviour can result
in an undesired side-effect that the kernel made the application
think the data has already been transmitted, although none of it
has actually left the machine, worst case even after close(2)'ing
the socket.

Instead, when the association from client side has been shut down
e.g. first gracefully through SCTP_EOF and then close(2), the
client could afterwards still receive the server's INIT_ACK due
to a connection with higher latency. This INIT_ACK is then considered
out of the blue and hence responded with ABORT as there was no
alive assoc found anymore. This can be easily reproduced f.e.
with sctp_test application from lksctp. One way to fix this race
is to wait for the handshake to actually complete.

The fix defers waiting after sctp_primitive_ASSOCIATE() and
sctp_primitive_SEND() succeeded, so that DATA chunks cooked up
from sctp_sendmsg() have already been placed into the output
queue through the side-effect interpreter, and therefore can then
be bundeled together with COOKIE_ECHO control chunks.

strace from example application (shortened):

socket(PF_INET, SOCK_SEQPACKET, IPPROTO_SCTP) = 3
sendmsg(3, {msg_name(28)={sa_family=AF_INET, sin_port=htons(8888), sin_addr=inet_addr("192.168.1.115")},
           msg_iov(1)=[{"hello", 5}], msg_controllen=0, msg_flags=0}, 0) = 5
sendmsg(3, {msg_name(28)={sa_family=AF_INET, sin_port=htons(8888), sin_addr=inet_addr("192.168.1.115")},
           msg_iov(1)=[{"hello", 5}], msg_controllen=0, msg_flags=0}, 0) = 5
sendmsg(3, {msg_name(28)={sa_family=AF_INET, sin_port=htons(8888), sin_addr=inet_addr("192.168.1.115")},
           msg_iov(1)=[{"hello", 5}], msg_controllen=0, msg_flags=0}, 0) = 5
sendmsg(3, {msg_name(28)={sa_family=AF_INET, sin_port=htons(8888), sin_addr=inet_addr("192.168.1.115")},
           msg_iov(1)=[{"hello", 5}], msg_controllen=0, msg_flags=0}, 0) = 5
sendmsg(3, {msg_name(28)={sa_family=AF_INET, sin_port=htons(8888), sin_addr=inet_addr("192.168.1.115")},
           msg_iov(0)=[], msg_controllen=48, {cmsg_len=48, cmsg_level=0x84 /* SOL_??? */, cmsg_type=, ...},
           msg_flags=0}, 0) = 0 // graceful shutdown for SOCK_SEQPACKET via SCTP_EOF
close(3) = 0

tcpdump before patch (fooling the application):

22:33:36.306142 IP 192.168.1.114.41462 > 192.168.1.115.8888: sctp (1) [INIT] [init tag: 3879023686] [rwnd: 106496] [OS: 10] [MIS: 65535] [init TSN: 3139201684]
22:33:36.316619 IP 192.168.1.115.8888 > 192.168.1.114.41462: sctp (1) [INIT ACK] [init tag: 3345394793] [rwnd: 106496] [OS: 10] [MIS: 10] [init TSN: 3380109591]
22:33:36.317600 IP 192.168.1.114.41462 > 192.168.1.115.8888: sctp (1) [ABORT]

tcpdump after patch:

14:28:58.884116 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [INIT] [init tag: 438593213] [rwnd: 106496] [OS: 10] [MIS: 65535] [init TSN: 3092969729]
14:28:58.888414 IP 192.168.1.115.8888 > 192.168.1.114.35846: sctp (1) [INIT ACK] [init tag: 381429855] [rwnd: 106496] [OS: 10] [MIS: 10] [init TSN: 2141904492]
14:28:58.888638 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [COOKIE ECHO] , (2) [DATA] (B)(E) [TSN: 3092969729] [...]
14:28:58.893278 IP 192.168.1.115.8888 > 192.168.1.114.35846: sctp (1) [COOKIE ACK] , (2) [SACK] [cum ack 3092969729] [a_rwnd 106491] [#gap acks 0] [#dup tsns 0]
14:28:58.893591 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [DATA] (B)(E) [TSN: 3092969730] [...]
14:28:59.096963 IP 192.168.1.115.8888 > 192.168.1.114.35846: sctp (1) [SACK] [cum ack 3092969730] [a_rwnd 106496] [#gap acks 0] [#dup tsns 0]
14:28:59.097086 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [DATA] (B)(E) [TSN: 3092969731] [...] , (2) [DATA] (B)(E) [TSN: 3092969732] [...]
14:28:59.103218 IP 192.168.1.115.8888 > 192.168.1.114.35846: sctp (1) [SACK] [cum ack 3092969732] [a_rwnd 106486] [#gap acks 0] [#dup tsns 0]
14:28:59.103330 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [SHUTDOWN]
14:28:59.107793 IP 192.168.1.115.8888 > 192.168.1.114.35846: sctp (1) [SHUTDOWN ACK]
14:28:59.107890 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [SHUTDOWN COMPLETE]

Looks like this bug is from the pre-git history museum. ;)

Fixes: 08707d5482df ("lksctp-2_5_31-0_5_1.patch")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 23:52:20 -05:00
Linus Torvalds 12ba8571ab Small number of fixes for clock drivers and a single null pointer
dereference fix in the framework core code. The driver fixes vary from
 fixing section mismatch warnings to preventing machines from hanging
 (and preventing developers from crying).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUuuT0AAoJEDqPOy9afJhJTCIP/iZ2AtnG/5mbYR8i7FzfSR8y
 gm+vpTvKAhIkWxj1DNUMtSTRBvfxO8xpnsXJ4BibIhmtO8yJbYI8LIEycIJ4TcWC
 4s0MDQsaMGVEfSI8K+OoFsXI+WzU1j28le2yYE6oHVuLe7gdLnpx6sheNdnL0XxX
 sv8HoI/pTFpw0jI20EZUcX/pEELGWlAZN9NCpW74cbVl/wusvV20CYG5n879Sg8n
 Zl26wXusys83+0mFgs6+Kvpeuxo78XXveTSvB+aJ5VEWDfm10kE5bqyo6iOL0rpI
 luGIMf6Uufq6+1Hzp8whgE59FOvugNjay3OR+pz7P+gWk1Ea5c9qXpBtg3gEtjF9
 JoMpjPSXAnGgjhJsuZhO4+z23OhpB+FcuC1x6EcL0i6iqpzbNpJTYa8eNMOOt8FR
 h3YCzr32IHZ6a2YutCuEdof8d9GZ5I2r8G9p8ezv7CJEBHIrLVTyu3xELwN9Ijuj
 p83716w0NU2avN2N6nF2sAF26UJhG/GbmQWkOSnj2cmeDI5xxnClJD/3etgtIaIj
 RA/WLVfUscszR52IZ2V56KKTrRJkNz04Zsx803yNZKXkNIrJ+I04xBAvQETKk24f
 fImY65mkJWC8iAErEKHYZi8WxdHAu5xRYwL34HvIfpDAsHvqHNZBltYTee6HuM2k
 wbD42D8XsOoBfZwg07RF
 =B+t3
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux

Pull clock driver fixes from Mike Turquette:
 "Small number of fixes for clock drivers and a single null pointer
  dereference fix in the framework core code.

  The driver fixes vary from fixing section mismatch warnings to
  preventing machines from hanging (and preventing developers from
  crying)"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: fix possible null pointer dereference
  Revert "clk: ppc-corenet: Fix Section mismatch warning"
  clk: rockchip: fix deadlock possibility in cpuclk
  clk: berlin: bg2q: remove non-exist "smemc" gate clock
  clk: at91: keep slow clk enabled to prevent system hang
  clk: rockchip: fix rk3288 cpuclk core dividers
  clk: rockchip: fix rk3066 pll lock bit location
  clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri
  clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host
2015-01-18 15:29:11 +12:00