commit f00432063d upstream.
We must ensure that all sockets are closed before we call xprt_free()
and release the reference to the net namespace. The problem is that
calling fput() will defer closing the socket until delayed_fput() gets
called.
Let's fix the situation by allowing rpciod and the transport teardown
code (which runs on the system wq) to call __fput_sync(), and directly
close the socket.
Reported-by: Felix Fu <foyjog@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: a73881c96d ("SUNRPC: Fix an Oops in udp_poll()")
Cc: stable@vger.kernel.org # 5.1.x: 3be232f11a3c: SUNRPC: Prevent immediate close+reconnect
Cc: stable@vger.kernel.org # 5.1.x: 89f42494f92f: SUNRPC: Don't call connect() more than once on a TCP socket
Cc: stable@vger.kernel.org # 5.1.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Meena Shanmugam <meenashanmugam@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef3a6b7050 upstream.
When dma_buf_stats_setup() fails, it closes the dmabuf file which
results into the calling of dma_buf_file_release() where it does
list_del(&dmabuf->list_node) with out first adding it to the proper
list. This is resulting into panic in the below path:
__list_del_entry_valid+0x38/0xac
dma_buf_file_release+0x74/0x158
__fput+0xf4/0x428
____fput+0x14/0x24
task_work_run+0x178/0x24c
do_notify_resume+0x194/0x264
work_pending+0xc/0x5f0
Fix it by moving the dma_buf_stats_setup() after dmabuf is added to the
list.
Fixes: bdb8d06dfe ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs")
Signed-off-by: Charan Teja Reddy <quic_charante@quicinc.com>
Tested-by: T.J. Mercier <tjmercier@google.com>
Acked-by: T.J. Mercier <tjmercier@google.com>
Cc: <stable@vger.kernel.org> # 5.15.x+
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1652125797-2043-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a56f445f80 upstream.
This reverts commit eaa090538e.
Commit ebc002e3ee ("drm/amdgpu: don't use BACO for reset in S3")
stops using BACO for reset during suspend, so it's no longer
necessary to leave BACO enabled during suspend. This fixes
resume from suspend on the navy flounder dGPU in the ASUS ROG
Strix G513QY.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2008
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1982
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3059d9b9f6 upstream.
Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure
unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags
and modifiers which were never initialized. Garbage in those members
can cause random failures during the bringup of the fbcon.
Initializing the structure fixes random blank screens after bootup due
to flags/modifiers mismatches during the fbcon bring up.
Fixes: dabdcdc982 ("drm/vmwgfx: Switch to mode_cmd2")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd13359f54 upstream.
Ensure that the gssproxy client connects to the server from the gssproxy
daemon process context so that the AF_LOCAL socket connection is done
using the correct path and namespaces.
Fixes: 1d658336b0 ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15f03ffe4b upstream.
Since commit f1131b9c23 ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/
resume hooks are used.
These functions require the probe function to be called so that
priv can be allocated.
Otherwise, a NULL pointer dereference happens inside
kszphy_config_reset().
Cc: stable@vger.kernel.org
Fixes: f1131b9c23 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220504143104.1286960-2-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e333eed63a upstream.
Since commit f1131b9c23 ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the following
NULL pointer dereference is observed on a board with KSZ8061:
# udhcpc -i eth0
udhcpc: started, v1.35.0
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = f73cef4e
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94
Hardware name: Freescale i.MX6 SoloX (Device Tree)
PC is at kszphy_config_reset+0x10/0x114
LR is at kszphy_resume+0x24/0x64
...
The KSZ8061 phy_driver structure does not have the .probe/..driver_data
fields, which means that priv is not allocated.
This causes the NULL pointer dereference inside kszphy_config_reset().
Fix the problem by using the generic suspend/resume functions as before.
Another alternative would be to provide the .probe and .driver_data
information into the structure, but to be on the safe side, let's
just restore Ethernet functionality by using the generic suspend/resume.
Cc: stable@vger.kernel.org
Fixes: f1131b9c23 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 260364d112 upstream.
The semantics of pfn_valid() is to check presence of the memory map for a
PFN and not whether a PFN is covered by the linear map. The memory map
may be present for NOMAP memory regions, but they won't be mapped in the
linear mapping. Accessing such regions via __va() when they are
memremap()'ed will cause a crash.
On v5.4.y the crash happens on qemu-arm with UEFI [1]:
<1>[ 0.084476] 8<--- cut here ---
<1>[ 0.084595] Unable to handle kernel paging request at virtual address dfb76000
<1>[ 0.084938] pgd = (ptrval)
<1>[ 0.085038] [dfb76000] *pgd=5f7fe801, *pte=00000000, *ppte=00000000
...
<4>[ 0.093923] [<c0ed6ce8>] (memcpy) from [<c16a06f8>] (dmi_setup+0x60/0x418)
<4>[ 0.094204] [<c16a06f8>] (dmi_setup) from [<c16a38d4>] (arm_dmi_init+0x8/0x10)
<4>[ 0.094408] [<c16a38d4>] (arm_dmi_init) from [<c0302e9c>] (do_one_initcall+0x50/0x228)
<4>[ 0.094619] [<c0302e9c>] (do_one_initcall) from [<c16011e4>] (kernel_init_freeable+0x15c/0x1f8)
<4>[ 0.094841] [<c16011e4>] (kernel_init_freeable) from [<c0f028cc>] (kernel_init+0x8/0x10c)
<4>[ 0.095057] [<c0f028cc>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
On kernels v5.10.y and newer the same crash won't reproduce on ARM because
commit b10d6bca87 ("arch, drivers: replace for_each_membock() with
for_each_mem_range()") changed the way memory regions are registered in
the resource tree, but that merely covers up the problem.
On ARM64 memory resources registered in yet another way and there the
issue of wrong usage of pfn_valid() to ensure availability of the linear
map is also covered.
Implement arch_memremap_can_ram_remap() on ARM and ARM64 to prevent access
to NOMAP regions via the linear mapping in memremap().
Link: https://lore.kernel.org/all/Yl65zxGgFzF1Okac@sirena.org.uk
Link: https://lkml.kernel.org/r/20220426060107.7618-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2685027fca upstream.
There are 3 places where the cpu and node masks of the top cpuset can
be initialized in the order they are executed:
1) start_kernel -> cpuset_init()
2) start_kernel -> cgroup_init() -> cpuset_bind()
3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp()
The first cpuset_init() call just sets all the bits in the masks.
The second cpuset_bind() call sets cpus_allowed and mems_allowed to the
default v2 values. The third cpuset_init_smp() call sets them back to
v1 values.
For systems with cgroup v2 setup, cpuset_bind() is called once. As a
result, cpu and memory node hot add may fail to update the cpu and node
masks of the top cpuset to include the newly added cpu or node in a
cgroup v2 environment.
For systems with cgroup v1 setup, cpuset_bind() is called again by
rebind_subsystem() when the v1 cpuset filesystem is mounted as shown
in the dmesg log below with an instrumented kernel.
[ 2.609781] cpuset_bind() called - v2 = 1
[ 3.079473] cpuset_init_smp() called
[ 7.103710] cpuset_bind() called - v2 = 0
smp_init() is called after the first two init functions. So we don't
have a complete list of active cpus and memory nodes until later in
cpuset_init_smp() which is the right time to set up effective_cpus
and effective_mems.
To fix this cgroup v2 mask setup problem, the potentially incorrect
cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed.
For cgroup v2 systems, the initial cpuset_bind() call will set the masks
correctly. For cgroup v1 systems, the second call to cpuset_bind()
will do the right setup.
cc: stable@vger.kernel.org
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 846a3351dd upstream.
We have run into an issue that a task gets stuck in
balance_dirty_pages_ratelimited() when perform I/O stress testing.
The reason we observed is that an I_DIRTY_PAGES inode with lots
of dirty pages is in b_dirty_time list and standard background
writeback cannot writeback the inode.
After studing the relevant code, the following scenario may lead
to the issue:
task1 task2
----- -----
fuse_flush
write_inode_now //in b_dirty_time
writeback_single_inode
__writeback_single_inode
fuse_write_end
filemap_dirty_folio
__xa_set_mark:PAGECACHE_TAG_DIRTY
lock inode->i_lock
if mapping tagged PAGECACHE_TAG_DIRTY
inode->i_state |= I_DIRTY_PAGES
unlock inode->i_lock
__mark_inode_dirty:I_DIRTY_PAGES
lock inode->i_lock
-was dirty,inode stays in
-b_dirty_time
unlock inode->i_lock
if(!(inode->i_state & I_DIRTY_All))
-not true,so nothing done
This patch moves the dirty inode to b_dirty list when the inode
currently is not queued in b_io or b_more_io list at the end of
writeback_single_inode.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: stable@vger.kernel.org
Fixes: 0ae45f63d4 ("vfs: add support for a lazytime mount option")
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220510023514.27399-1-jing.xia@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91a7cda1f4 upstream.
This fixes the following error caused by a race condition between
phydev->adjust_link() and a MDIO transaction in the phy interrupt
handler. The issue was reproduced with the ethernet FEC driver and a
micrel KSZ9031 phy.
[ 146.195696] fec 2188000.ethernet eth0: MDIO read timeout
[ 146.201779] ------------[ cut here ]------------
[ 146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c
[ 146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug
[ 146.220640] CPU: 0 PID: 571 Comm: irq/128-2188000 Not tainted 5.18.0-rc3-00080-gd569e86915b7 #9
[ 146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 146.236257] unwind_backtrace from show_stack+0x10/0x14
[ 146.241640] show_stack from dump_stack_lvl+0x58/0x70
[ 146.246841] dump_stack_lvl from __warn+0xb4/0x24c
[ 146.251772] __warn from warn_slowpath_fmt+0x5c/0xd4
[ 146.256873] warn_slowpath_fmt from phy_error+0x24/0x6c
[ 146.262249] phy_error from kszphy_handle_interrupt+0x40/0x48
[ 146.268159] kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78
[ 146.274417] irq_thread_fn from irq_thread+0xf0/0x1dc
[ 146.279605] irq_thread from kthread+0xe4/0x104
[ 146.284267] kthread from ret_from_fork+0x14/0x28
[ 146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8)
[ 146.294448] 1fa0: 00000000 00000000 00000000 00000000
[ 146.302842] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 146.311281] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 146.318262] irq event stamp: 12325
[ 146.321780] hardirqs last enabled at (12333): [<c01984c4>] __up_console_sem+0x50/0x60
[ 146.330013] hardirqs last disabled at (12342): [<c01984b0>] __up_console_sem+0x3c/0x60
[ 146.338259] softirqs last enabled at (12324): [<c01017f0>] __do_softirq+0x2c0/0x624
[ 146.346311] softirqs last disabled at (12319): [<c01300ac>] __irq_exit_rcu+0x138/0x178
[ 146.354447] ---[ end trace 0000000000000000 ]---
With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link()
calls fec_stop()/fec_restart() and both these function reset and
temporary disable the FEC disrupting any MII transaction that
could be happening at the same time.
fec_enet_adjust_link() and phy_read() can be running at the same time
when we have one additional interrupt before the phy_state_machine() is
able to terminate.
Thread 1 (phylib WQ) | Thread 2 (phy interrupt)
|
| phy_interrupt() <-- PHY IRQ
| handle_interrupt()
| phy_read()
| phy_trigger_machine()
| --> schedule phylib WQ
|
|
phy_state_machine() |
phy_check_link_status() |
phy_link_change() |
phydev->adjust_link() |
fec_enet_adjust_link() |
--> FEC reset | phy_interrupt() <-- PHY IRQ
| phy_read()
|
Fix this by acquiring the phydev lock in phy_interrupt().
Link: https://lore.kernel.org/all/20220422152612.GA510015@francesco-nb.int.toradex.com/
Fixes: c974bdbc3e ("net: phy: Use threaded IRQ, to allow IRQ from sleeping devices")
cc: <stable@vger.kernel.org>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220506060815.327382-1-francesco.dolcini@toradex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1809c30b6e upstream.
The impact of this regression is the same for resume that I saw on
thaw: the kernel hangs and nothing except SysRq rebooting can be done.
Fixes regression in commit cbe6c3a8f8 ("net: atlantic: invert deep
par in pm functions, preventing null derefs"), where I disabled deep
pm resets in suspend and resume, trying to make sense of the
atl_resume_common() deep parameter in the first place.
It turns out, that atlantic always has to deep reset on pm
operations. Even though I expected that and tested resume, I screwed
up by kexec-rebooting into an unpatched kernel, thus missing the
breakage.
This fixup obsoletes the deep parameter of atl_resume_common, but I
leave the cleanup for the maintainers to post to mainline.
Suspend and hibernation were successfully tested by the reporters.
Fixes: cbe6c3a8f8 ("net: atlantic: invert deep par in pm functions, preventing null derefs")
Link: https://lore.kernel.org/regressions/9-Ehc_xXSwdXcvZqKD5aSqsqeNj5Izco4MYEwnx5cySXVEc9-x_WC4C3kAoCqNTi-H38frroUK17iobNVnkLtW36V6VWGSQEOHXhmVMm5iQ=@protonmail.com/
Reported-by: Jordan Leppert <jordanleppert@protonmail.com>
Reported-by: Holger Hoffstaette <holger@applied-asynchrony.com>
Tested-by: Jordan Leppert <jordanleppert@protonmail.com>
Tested-by: Holger Hoffstaette <holger@applied-asynchrony.com>
CC: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Manuel Ullmann <labre@posteo.de>
Link: https://lore.kernel.org/r/87bkw8dfmp.fsf@posteo.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f95a7472d upstream.
The bug is here:
ret = i40e_add_macvlan_filter(hw, ch->seid, vdev->dev_addr, &aq_err);
The list iterator 'ch' will point to a bogus position containing
HEAD if the list is empty or no element is found. This case must
be checked before any use of the iterator, otherwise it will
lead to a invalid memory access.
To fix this bug, use a new variable 'iter' as the list iterator,
while use the origin variable 'ch' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 1d8d80b4e4 ("i40e: Add macvlan support on i40e")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220510204846.2166999-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87fd2b091f upstream.
Even if some IOMMU has registered itself on the platform "bus", that
doesn't necessarily mean it provides translation for the device we
care about. Replace iommu_present() with a more appropriate check.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added cc for stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org # v5.0+
Link: https://patchwork.freedesktop.org/patch/msgid/70d40ea441da3663c2824d54102b471e9a621f8a.1649168494.git.robin.murphy@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21d1d19289 upstream.
With very limited vram on svga3 it's difficult to handle all the surface
migrations. Without gbobjects, i.e. the ability to store surfaces in
guest mobs, there's no reason to support intermediate svga2 features,
especially because we can fall back to fb traces and svga3 will never
support those in-between features.
On svga3 we wither want to use fb traces or screen targets
(i.e. gbobjects), nothing in between. This fixes presentation on a lot
of fusion/esxi tech previews where the exposed svga3 caps haven't been
finalized yet.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2cd80dbd35 ("drm/vmwgfx: Add basic support for SVGA3")
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4e61fc031 upstream.
Patch series "mm/memory-failure: rework fix on huge_zero_page splitting".
This patch (of 2):
This reverts commit d173d5417f.
The commit d173d5417f ("mm/memory-failure.c: skip huge_zero_page in
memory_failure()") explicitly skips huge_zero_page in memory_failure(), in
order to avoid triggering VM_BUG_ON_PAGE on huge_zero_page in
split_huge_page_to_list().
This works, but Yang Shi thinks that,
Raising BUG is overkilling for splitting huge_zero_page. The
huge_zero_page can't be met from normal paths other than memory
failure, but memory failure is a valid caller. So I tend to replace
the BUG to WARN + returning -EBUSY. If we don't care about the
reason code in memory failure, we don't have to touch memory
failure.
And for the issue that huge_zero_page will be set PG_has_hwpoisoned,
Yang Shi comments that,
The anonymous page fault doesn't check if the page is poisoned or
not since it typically gets a fresh allocated page and assumes the
poisoned page (isolated successfully) can't be reallocated again.
But huge zero page and base zero page are reused every time. So no
matter what fix we pick, the issue is always there.
Finally, Yang, David, Anshuman and Naoya all agree to fix the bug, i.e.,
to split huge_zero_page, in split_huge_page_to_list().
This reverts the commit d173d5417f ("mm/memory-failure.c: skip
huge_zero_page in memory_failure()"), and the original bug will be fixed
by the next patch.
Link: https://lkml.kernel.org/r/872cefb182ba1dd686b0e7db1e6b2ebe5a4fff87.1651039624.git.xuyu@linux.alibaba.com
Fixes: d173d5417f ("mm/memory-failure.c: skip huge_zero_page in memory_failure()")
Fixes: 6a46079cf5 ("HWPOISON: The high level memory error handler in the VM v7")
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Suggested-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 620239d9a3 upstream.
Currently when we create a file, we spin up an xattr buffer to send
along with the create request. If we end up doing an async create
however, then we currently pass down a zero-length xattr buffer.
Fix the code to send down the xattr buffer in req->r_pagelist. If the
xattrs span more than a page, however give up and don't try to do an
async create.
Cc: stable@vger.kernel.org
URL: https://bugzilla.redhat.com/show_bug.cgi?id=2063929
Fixes: 9a8d03ca2e ("ceph: attempt to do async create when possible")
Reported-by: John Fortin <fortinj66@gmail.com>
Reported-by: Sri Ramanujam <sri@ramanujam.io>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1bfdbc7da upstream.
The XON1/XOFF1 character registers are at offset 0xa0 and 0xa8
respectively, so we cannot use the definition in serial_port.h.
Fixes: bdbd0a7f8f ("serial: 8250-mtk: modify baudrate setting")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427132328.228297-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb0b197aad upstream.
On MediaTek SoCs, the UART IP is 16550A compatible, but there are some
specific quirks: we are declaring a register shift of 2, but this is
only valid for the majority of the registers, as there are some that
are out of the standard layout.
Specifically, this driver is using definitions from serial_reg.h, where
we have a UART_EFR register defined as 2: this results in a 0x8 offset,
but there we have the FCR register instead.
The right offset for the EFR register on MediaTek UART is at 0x98,
so, following the decimal definition convention in serial_reg.h and
accounting for the register left shift of two, add and use the correct
register address for this IP, defined as decimal 38, so that the final
calculation results in (0x26 << 2) = 0x98.
Fixes: bdbd0a7f8f ("serial: 8250-mtk: modify baudrate setting")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427132328.228297-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 401fb66a35 upstream.
If an irq is pending when devm_request_irq() is called, the irq
handler will cause a NULL pointer access because initialisation
is not done yet.
Fixes: 9d7ee0e28d ("tty: serial: lpuart: avoid report NULL interrupt")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Indan Zupancic <Indan.Zupancic@mep-info.com>
Link: https://lore.kernel.org/r/20220505114750.45423-1-Indan.Zupancic@mep-info.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe503887ee upstream.
platform_get_irq() returns non-zero IRQ number on success,
negative error number on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: ad7fcbc308 ("slimbus: qcom: Add Qualcomm Slimbus controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220429164917.5202-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26a08f8bad upstream.
Add the device id for the HPLM930Display which is a PL2303GC based
device.
Signed-off-by: Scott Chen <scott@labau.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbc126ae38 upstream.
Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
In this case the remove callback even returns early without stopping the
tcpm worker thread and various timers. A work scheduled on the work
queue, or a firing timer after tcpci_remove() returned probably results
in a use-after-free situation because the regmap and driver data were
freed. So better make sure that tcpci_unregister_port() is called even
if disabling the irq failed.
Also emit a more specific error message instead of the i2c core's
"remove failed (EIO), will be ignored" and return 0 to suppress the
core's warning.
This patch is (also) a preparation for making i2c remove callbacks
return void.
Fixes: 3ba76256fc ("usb: typec: tcpci: mask event interrupts when remove driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220502080456.21568-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01e01f5c89 upstream.
cdc-wdm tracks whether a response reading request is in-progress and
blocks the next request from being sent until the previous request is
completed. As soon as last user closes the cdc-wdm device file, the
driver cancels any ongoing requests, resets the pending response
counter, but leaves the response reading in-progress flag
(WDM_RESPONDING) untouched.
So if the user closes the device file during the response receive
request is being performed, no more data will be obtained from the
modem. The request will be cancelled, effectively preventing the
WDM_RESPONDING flag from being reseted. Keeping the flag set will
prevent a new response receive request from being sent, permanently
blocking the read path. The read path will staying blocked until the
module will be reloaded or till the modem will be re-attached.
This stuck has been observed with a Huawei E3372 modem attached to an
OpenWrt router and using the comgt utility to set up a network
connection.
Fix this issue by clearing the WDM_RESPONDING flag on the device file
close.
Without this fix, the device reading stuck can be easily reproduced in a
few connection establishing attempts. With this fix, a load test for
modem connection re-establishing worked for several hours without any
issues.
Fixes: 922a5eadd5 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device")
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit edd5f60c34 upstream.
The current implementation activates the mux if it was restarted and opens
the control channel if the mux was previously closed and we are now acting
as initiator instead of responder, which is the default setting.
This has two issues.
1) No mux is activated if we keep all default values and only switch to
initiator. The control channel is not allocated but will be opened next
which results in a NULL pointer dereference.
2) Switching the configuration after it was once configured while keeping
the initiator value the same will not reopen the control channel if it was
closed due to parameter incompatibilities. The mux remains dead.
Fix 1) by always activating the mux if it is dead after configuration.
Fix 2) by always opening the control channel after mux activation.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220504081733.3494-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd442e5ba3 upstream.
'len' is decreased after each octet that has its EA bit set to 0, which
means that the value is encoded with additional octets. However, the final
octet does not decreases 'len' which results in 'len' being one byte too
long. A buffer over-read may occur in tty_insert_flip_string() as it tries
to read one byte more than the passed content size of 'data'.
Decrease 'len' also for the final octet which has the EA bit set to 1 to
write the correct number of bytes from the internal receive buffer to the
virtual tty.
Fixes: 2e124b4a39 ("TTY: switch tty_flip_buffer_push")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220504081733.3494-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 447ee1516f upstream.
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes: 5930cb3511 ("serial: driver for Conexant Digicolor USART")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 280abe14b6 upstream.
The unused part precedes the new range spanned by the start, end parameters
of vmemmap_use_new_sub_pmd(). This means it actually goes from
ALIGN_DOWN(start, PMD_SIZE) up to start.
Use the correct address when applying the mark using memset.
Fixes: 8d400913c2 ("x86/vmemmap: handle unpopulated sub-pmd ranges")
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220509090637.24152-2-ken@codelabs.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c237566b78 upstream.
Due to the scheduler allocates the optimal bandwidth for FS ISOC endpoints,
this may be not enough actually and causes data transfer error, so come up
with an estimate that is no less than the worst case bandwidth used for
any one mframe, but may be an over-estimate.
Fixes: 451d391258 ("usb: xhci-mtk: update fs bus bandwidth by bw_budget_table")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220512064931.31670-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee8348496c upstream.
Commit 863771a28e ("powerpc/32s: Convert switch_mmu_context() to C")
moved the switch_mmu_context() to C. While in principle a good idea, it
meant that the function now uses the stack. The stack is not accessible
from real mode though.
So to keep calling the function, let's turn on MSR_DR while we call it.
That way, all pointer references to the stack are handled virtually.
In addition, make sure to save/restore r12 on the stack, as it may get
clobbered by the C function.
Fixes: 863771a28e ("powerpc/32s: Convert switch_mmu_context() to C")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220510123717.24508-1-graf@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 581dd69830 upstream.
Device drivers may decide to not load firmware when probed to avoid
slowing down the boot process should the firmware filesystem not be
available yet. In this case, the firmware loading request may be done
when a device file associated with the driver is first accessed. The
credentials of the userspace process accessing the device file may be
used to validate access to the firmware files requested by the driver.
Ensure that the kernel assumes the responsibility of reading the
firmware.
This was observed on Android for a graphic driver loading their firmware
when the device file (e.g. /dev/mali0) was first opened by userspace
(i.e. surfaceflinger). The security context of surfaceflinger was used
to validate the access to the firmware file (e.g.
/vendor/firmware/mali.bin).
Previously, Android configurations were not setting up the
firmware_class.path command line argument and were relying on the
userspace fallback mechanism. In this case, the security context of the
userspace daemon (i.e. ueventd) was consistently used to read firmware
files. More Android devices are now found to set firmware_class.path
which gives the kernel the opportunity to read the firmware directly
(via kernel_read_file_from_path_initns). In this scenario, the current
process credentials were used, even if unrelated to the loading of the
firmware file.
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Cc: <stable@vger.kernel.org> # 5.10
Reviewed-by: Paul Moore <paul@paul-moore.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20220502004952.3970800-1-tweek@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 20ce30fb47 ]
Ignore compatible strings for the IPA virt drivers that were removed in
commits 2fb251c265 ("interconnect: qcom: sdx55: Drop IP0
interconnects") and 2f3724930e ("interconnect: qcom: sc7180: Drop IP0
interconnects") so that the sync state logic can kick in again.
Otherwise all the interconnects in the system will stay pegged at max
speeds because 'providers_count' is always going to be one larger than
the number of drivers that will ever probe on sc7180 or sdx55. This
fixes suspend on sc7180 and sdx55 devices when you don't have a
devicetree patch to remove the ipa-virt compatible node.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Alex Elder <elder@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: 2fb251c265 ("interconnect: qcom: sdx55: Drop IP0 interconnects")
Fixes: 2f3724930e ("interconnect: qcom: sc7180: Drop IP0 interconnects")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220427013226.341209-1-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8161345dd ]
In commit 190cc82489 ("tcp: change source port randomizarion at
connect() time"), the table_perturb[] array was introduced and an
index was taken from the port_offset via hash_32(). But it turns
out that hash_32() performs a multiplication while the input here
comes from the output of SipHash in secure_seq, that is well
distributed enough to avoid the need for yet another hash.
Suggested-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c2c8f03a5 ]
Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately
identify a client by forcing it to emit only 40 times more connections
than there are entries in the table_perturb[] table. The previous two
improvements consisting in resalting the secret every 10s and adding
randomness to each port selection only slightly improved the situation,
and the current value of 2^8 was too small as it's not very difficult
to make a client emit 10k connections in less than 10 seconds.
Thus we're increasing the perturb table from 2^8 to 2^16 so that the
same precision now requires 2.6M connections, which is more difficult in
this time frame and harder to hide as a background activity. The impact
is that the table now uses 256 kB instead of 1 kB, which could mostly
affect devices making frequent outgoing connections. However such
components usually target a small set of destinations (load balancers,
database clients, perf assessment tools), and in practice only a few
entries will be visited, like before.
A live test at 1 million connections per second showed no performance
difference from the previous value.
Reported-by: Moshe Kol <moshe.kol@mail.huji.ac.il>
Reported-by: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e926147618 ]
We'll need to further increase the size of this table and it's likely
that at some point its size will not be suitable anymore for a static
table. Let's allocate it on boot from inet_hashinfo2_init(), which is
called from tcp_init().
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca7af04025 ]
Here we're randomly adding between 0 and 7 random increments to the
selected source port in order to add some noise in the source port
selection that will make the next port less predictable.
With the default port range of 32768-60999 this means a worst case
reuse scenario of 14116/8=1764 connections between two consecutive
uses of the same port, with an average of 14116/4.5=3137. This code
was stressed at more than 800000 connections per second to a fixed
target with all connections closed by the client using RSTs (worst
condition) and only 2 connections failed among 13 billion, despite
the hash being reseeded every 10 seconds, indicating a perfectly
safe situation.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dfa9b438e ]
In order to limit the ability for an observer to recognize the source
ports sequence used to contact a set of destinations, we should
periodically shuffle the secret. 10 seconds looks effective enough
without causing particular issues.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e9b70ae92 ]
Amit Klein suggests that we use different parts of port_offset for the
table's index and the port offset so that there is no direct relation
between them.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2d057560b ]
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e5300 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2069624dac ]
As noted elsewhere, various GPON SFP modules exhibit non-standard
TX-fault behaviour. In the tested case, the Huawei MA5671A, when used
in combination with a Marvell mv88e6085 switch, was found to
persistently assert TX-fault, resulting in the module being disabled.
This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the
module to function.
Change from v1: removal of erroneous return statment (Andrew Lunn)
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b800528b97 ]
In xemaclite_open() function we are setting the max speed of
emaclite to 100Mb using phy_set_max_speed() function so,
there is no need to write the advertising registers to stop
giga-bit speed and the phy_start() function starts the
auto-negotiation so, there is no need to handle it separately
using advertising registers. Remove the phy_read and phy_write
of advertising registers in xemaclite_open() function.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b202ee218 ]
gcc-12 shows a lot of array bound warnings on s390. This is caused
by the S390_lowcore macro which uses a hardcoded address of 0.
Wrapping that with absolute_pointer() works, but gcc no longer knows
that a 12 bit displacement is sufficient to access lowcore. So it
emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a
single load/store instruction. As s390 stores variables often
read/written in lowcore, this is considered problematic. Therefore
disable -Warray-bounds on s390 for gcc-12 for the time being, until
there is a better solution.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/yt9dzgkelelc.fsf@linux.ibm.com
Link: https://lore.kernel.org/r/20220422134308.1613610-1-svens@linux.ibm.com
Link: https://lore.kernel.org/r/20220425121742.3222133-1-svens@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa22125c57 ]
Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust
Naoya Horiguchi
Charan Teja Reddy
Alex Deucher
Zack Rusin
Fabio Estevam
Mike Rapoport
Waiman Long
Jing Xia
Francesco Dolcini
Manuel Ullmann
Xiaomeng Tong
Robin Murphy
Xu Yu
Jeff Layton
AngeloGioacchino Del Regno
Indan Zupancic
Miaoqian Lin
Sven Schwermer
Ethan Yang
Scott Chen
ChiYuan Huang
Uwe Kleine-König
Sergey Ryazanov
Daniel Starke
Yang Yingliang
Adrian-Ken Rueegsegger
Chunfeng Yun
Alexander Graf
Thiébaud Weksteen
Stephen Boyd
Willy Tarreau
Eric Dumazet
Matthew Hagan
Shravya Kumbham
Ajit Kumar Pandey
Sven Schnelle
Mark Brown