Make ql_pcmd() a void function and set the SCSI result directly.
[mkp: fix zeroday 'result' warning]
Link: https://lore.kernel.org/r/20210427083046.31620-21-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fix
Drop message byte setting if the host byte is already set, and translate
message bytes into the related host bytes when evaluating an overrun or
underrun.
Link: https://lore.kernel.org/r/20210427083046.31620-20-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use standard macros to set the SCSI result and drop the internal ones.
Link: https://lore.kernel.org/r/20210427083046.31620-19-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add helper to convert message byte into a host byte code.
Link: https://lore.kernel.org/r/20210427083046.31620-18-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add accessor functions for the host and status byte.
Link: https://lore.kernel.org/r/20210427083046.31620-17-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The message byte can take only two values, COMMAND_COMPLETE and ABORT. So
we can easily map ABORT to DID_ABORT and not set the message byte.
Link: https://lore.kernel.org/r/20210427083046.31620-16-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver_byte field in the result is now unused, so we can drop the
definitions.
Link: https://lore.kernel.org/r/20210427083046.31620-15-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The Xen guest might run against arbitrary backends, so the driver might
receive a status with driver_byte set. Map these errors to DID_ERROR to be
consistent with recent changes.
Link: https://lore.kernel.org/r/20210427083046.31620-14-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DRIVER_ERROR was supposed to signal an error generated by the driver, which
xen-scsiback arguably isn't. Also the driver bytes don't have a detailed
error recovery, so we should rather return DID_ERROR instead of
DRIVER_ERROR.
Link: https://lore.kernel.org/r/20210427083046.31620-13-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Set DID_TIME_OUT instead of DRIVER_TIMEOUT when a command
is finally marked as failed after error recovery.
Link: https://lore.kernel.org/r/20210427083046.31620-12-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no point in returning DID_ABORT together with DRIVER_INVALID, as
the caller couldn't care less where the abort originated. So drop the use
of DRIVER_INVALID.
Link: https://lore.kernel.org/r/20210427083046.31620-11-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the check for DRIVER_SENSE with a check for
scsi_status_is_check_condition().
Audit all callsites to ensure the SAM status is set correctly. For
backwards compability move the DRIVER_SENSE definition to sg.h, and update
sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever
SAM_STAT_CHECK_CONDITION is present.
[mkp: fix zeroday srp warning]
Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fix
Add a helper function scsi_status_is_check_condition() to encapsulate the
frequent checks for SAM_STAT_CHECK_CONDITION.
Link: https://lore.kernel.org/r/20210427083046.31620-9-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer()
to format the buffer and set the correct SCSI status.
Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return the actual error code in __scsi_execute() (which, according to the
documentation, should have happened anyway). And audit all callers to cope
with negative return values from __scsi_execute() and friends.
[mkp: resolve conflict and return bool]
Link: https://lore.kernel.org/r/20210427083046.31620-7-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_execute() will now return a negative error if there was an error prior
to command submission; evaluate that instead if checking for DRIVER_ERROR.
[mkp: build fix]
Link: https://lore.kernel.org/r/20210427083046.31620-6-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reshuffle response handling in scsi_mode_sense() to make the code easier to
follow.
[mkp: fix build]
Link: https://lore.kernel.org/r/20210427083046.31620-5-hare@suse.de
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The description for scsi_mode_sense() claims to return the number of valid
bytes on success, which is not what the code does. Additionally there is
no gain in returning the SCSI status, as everything the callers do is to
check against scsi_result_is_good(), which is what scsi_mode_sense() does
already. So change the calling convention to return a standard error code
on failure, and 0 on success, and adapt the description and all callers.
Link: https://lore.kernel.org/r/20210427083046.31620-4-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The callers of sg_scsi_ioctl() already check for negative return values, so
we can drop the usage of DRIVER_ERROR and return the error from
blk_rq_map_kern() instead.
Link: https://lore.kernel.org/r/20210427083046.31620-3-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The callers to st_scsi_execute() already check for negative return values,
so we can drop the use of DRIVER_ERROR and return the actual error code.
Link: https://lore.kernel.org/r/20210427083046.31620-2-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
From ufshcd_transfer_req_compl():
Resetting interrupt aggregation counters first and reading the
DOOR_BELL afterward allows us to handle all the completed requests. In
order to prevent other interrupts starvation the DB is read once after
reset. The down side of this solution is the possibility of false
interrupt if device completes another request after resetting
aggregation and before reading the DB.
Prevent that ufshcd_intr() reports a false positive "Unhandled interrupt"
message if the above scenario is triggered.
Link: https://lore.kernel.org/r/20210519202058.12634-2-bvanassche@acm.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a firmware fault occurs while scanning the devices during IOC
initialization then the driver issues the hard reset operation to recover
the IOC. However, the driver is not issuing a Port enable request
message as part of hard reset operation during IOC initialization. Due to
this, the driver will not receive get any device discovery-related events
and hence devices will not be accessible.
Teach the driver to gracefully handle firmware faults while scanning for
target devices during IOC initialization. Make the driver issue a port
enable request message as part of hard reset operation. This permits
receiving device discovery-related events from the firmware after the hard
reset operation completes.
Link: https://lore.kernel.org/r/20210518051625.1596742-4-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During first half of IOC initialization (i.e. before going for device
scanning), if any firmware fault occurs then driver is aborting the IOC
initialization operation.
Modify the driver to issue a diag reset operation to recover IOC from fault
state and reinitialize the IOC.
Link: https://lore.kernel.org/r/20210518051625.1596742-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do not cancel current running firmware event work if the event type is
different from MPT3SAS_REMOVE_UNRESPONDING_DEVICES. Otherwise a deadlock
can be observed while cancelling the current firmware event work if a hard
reset operation is called as part of processing the current event.
Link: https://lore.kernel.org/r/20210518051625.1596742-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs handling function sdev_store_queue_depth() enforces that the sdev
queue depth cannot exceed shost can_queue. The initial sdev queue depth
comes from shost cmd_per_lun. However, the LLDD may manually set
cmd_per_lun to be larger than can_queue, which leads to an initial sdev
queue depth greater than can_queue.
Such an issue was reported in [0], which caused a hang. That has since been
fixed in commit fc09acb7de ("scsi: scsi_debug: Fix cmd_per_lun, set to
max_queue").
Stop this possibly happening for other drivers by capping shost cmd_per_lun
at shost can_queue.
[0] https://lore.kernel.org/linux-scsi/YHaez6iN2HHYxYOh@T590/
Link: https://lore.kernel.org/r/1621434662-173079-1-git-send-email-john.garry@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 12.8.0.10
Link: https://lore.kernel.org/r/20210514195559.119853-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FC-LS-5 specifies that a received RDF implies a possible change to fabric
supported diagnostic functions. Endpoints are to re-perform the RDF
exchange with the fabric to enable possible new features or adapt to
changes in values.
This patch adds the logic to RDF receive to re-perform the RDF exchange
with the switch.
Link: https://lore.kernel.org/r/20210514195559.119853-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Default behavior for the driver, when aborting an I/O, is to terminate the
I/O with the adapter. The adapter will initiate an ABTS to terminate the
exchange on the link and mark the exchange is terminated so that no further
use of the sgl or any traffic for the exchange is worked on. Completion on
the Abort is then posted to the driver, which as the I/O is terminated can
complete the I/O to the OS. This completion may occur prior to the ABTS
handshake completing on the wire. The ABTS handshake can take a long time
to complete with timeouts and retries reaching 60+ seconds. Note: if
retries fail, LOGO occurs.
Some devices want to ensure that the ABTS handshake fully completes (this
device has fully ack'd it) before the I/O completion is posted back to the
OS, where a failed I/O may be retried via a different path.
To support this behavior, an option was added to the driver to change I/O
completion from the Abort cmd completion to the Exchange termination (aka
ABTS) completion.
Link: https://lore.kernel.org/r/20210514195559.119853-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is encountering a crash in lpfc_free_iocb_list() while
performing initial attachment.
Code review found this to be an errant failure path that was taken, jumping
to a tag that then referenced structures that were uninitialized.
Fix the failure path.
Link: https://lore.kernel.org/r/20210514195559.119853-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a link bounce happens, there is a possibility that responses to
requests posted prior to the link bounce could be received. This is
problematic as the counter to track reglogin completion after link up can
become out of sync with the real state.
As there is no reason to process a request made in a prior link up context,
eliminate all the disturbance by tagging the request with the event_tag
maintained by the SLI Port for the link. The event_tag will change on every
link state transition. As long as the tag matches the current event_tag,
the response can be processed. If it doesn't match, just discard the
response.
Link: https://lore.kernel.org/r/20210514195559.119853-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During link bounce testing, RPI counts were seen to differ from the number
of nodes. For fabric and domain controllers, a temporary RPI is assigned,
but the code isn't registering it. If the nodes do go away, such as on link
down, the temporary RPI isn't being released.
Change the way these two fabric services are managed, make them behave like
any other remote port. Register the RPI and register with the transport.
Never leave the nodes in a NPR or UNUSED state where their RPI is in limbo.
This allows them to follow normal dev_loss_tmo handling, RPI refcounting,
and normal removal rules. It also allows fabric I/Os to use the RPI for
traffic requests.
Note: There is some logic that still has a couple of exceptions when the
Domain controller (0xfffcXX). There are cases where the fabric won't have a
valid login but will send RDP. Other times, it will it send a LOGO then an
RDP. It makes for ad-hoc behavior to manage the node. Exceptions are
documented in the code.
Link: https://lore.kernel.org/r/20210514195559.119853-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When lpfc is handling a solicited and unsolicited PLOGI with another
initiator, the remote initiator is never recovered. The node for the
initiator is erroneouosly removed and all resources released.
In lpfc_cmpl_els_plogi(), when lpfc_els_retry() returns a failure code, the
driver is calling the state machine with a device remove event because the
remote port is not currently registered with the SCSI or NVMe
transports. The issue is that on a PLOGI "collision" the driver correctly
aborts the solicited PLOGI and allows the unsolicited PLOGI to complete the
process, but this process is interrupted with a device_rm event.
Introduce logic in the PLOGI completion to capture the PLOGI collision
event and jump out of the routine. This will avoid removal of the node.
If there is no collision, the normal node removal will occur.
Fixes: 52edb2caf6 ("scsi: lpfc: Remove ndlp when a PLOGI/ADISC/PRLI/REG_RPI ultimately fails")
Cc: <stable@vger.kernel.org> # v5.11+
Link: https://lore.kernel.org/r/20210514195559.119853-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is crashing due to a bad pointer during driver load due in an
adisc acc receive routine. The driver is missing node get/put in the
mbx_resume_rpi paths.
Fix by adding the proper gets and puts into the resume_rpi path.
Link: https://lore.kernel.org/r/20210514195559.119853-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An 'unexpected timeout' message may be seen in a point-2-point topology.
The message occurs when a PLOGI is received before the driver is notified
of FLOGI completion. The FLOGI completion failure causes discovery to be
triggered for a second time. The discovery timer is restarted but no new
discovery activity is initiated, thus the timeout message eventually
appears.
In point-2-point, when discovery has progressed before the FLOGI completion
is processed, it is not a failure. Add code to FLOGI completion to detect
that discovery has progressed and exit the FLOGI handling (noop'ing it).
Link: https://lore.kernel.org/r/20210514195559.119853-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When processing an NVMe ERSP IU which didn't match the optimized CQE-only
path, the status was being left to the WQE status. WQE status is non-zero
as it is indicating a non-optimized completion that needs to be handled by
the driver.
Fix by clearing the status field when falling into the non-optimized
case. Log message added to track optimized vs non-optimized debug.
Link: https://lore.kernel.org/r/20210514195559.119853-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While testing NPIV and watching logins and used RPI levels, it was seen the
used RPI count was much higher than the number of remote ports discovered.
Code inspection showed that remote port removals on any NPIV instance are
releasing the RPI, but not performing an UNREG_RPI with the adapter thus
the reference counting never fully drops and the RPI is never fully
released. This was happening on NPIV nodes due to a log of fabric ELS's to
fabric addresses. This lack of UNREG_RPI was introduced by a prior node
rework patch that performed the UNREG_RPI as part of node cleanup.
To resolve the issue, do the following:
- Restore the RPI release code, but move the location to so that it is in
line with the new node cleanup design.
- NPIV ports now release the RPI and drop the node when the caller sets
the NLP_RELEASE_RPI flag.
- Set the NLP_RELEASE_RPI flag in node cleanup which will trigger a
release of RPI to free pool.
- Ensure there's an UNREG_RPI at LOGO completion so that RPI release is
completed.
- Stop offline_prep from skipping nodes that are UNUSED. The RPI may
not have been released.
- Stop the default RPI handling in lpfc_cmpl_els_rsp() for SLI4.
- Fixed up debugfs RPI displays for better debugging.
Fixes: a70e63eee1 ("scsi: lpfc: Fix NPIV Fabric Node reference counting")
Link: https://lore.kernel.org/r/20210514195559.119853-2-jsmart2021@gmail.com
Cc: <stable@vger.kernel.org> # v5.11+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an RTPG fails, we can't infer anything wrt. the state of the ports in
the port group except that we were unable to reach the one port on which
the RTPG had failed. "offline" is just a secondary port state, which means
that we can't infer the state of any port in the PG from the failure (in
fact, even the failed port might still be in "active/optimized" primary
port access state).
Therefore, when we encounter an RTPG failure, we should retry the RTPG on a
different port. This avoids falsely setting port states to offline for
unreachable ports. To do this, ports on which an RTPG has failed are
temporarily set to "disabled" to avoid repeating the failed I/O on the same
target port. Once the RTPG has either succeeded on one port or failed on
all ports of the PG, the ports are enabled again.
Link: https://lore.kernel.org/r/20210514153214.5626-1-mwilck@suse.com
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable rval is set to QLA_SUCCESS but this value is never read as it is
overwritten later on. Hence it is a redundant assignment and can be
removed.
Clean up the following clang-analyzer warning:
drivers/scsi/qla2xxx/qla_init.c:4359:2: warning: Value stored to 'rval'
is never read [clang-analyzer-deadcode.DeadStores].
Link: https://lore.kernel.org/r/1620643206-127930-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don't populate the const array granularity_tbl on the stack but instead
make it static. Makes the object code smaller by 190 bytes:
Before:
text data bss dec hex filename
25563 6908 0 32471 7ed7 ./drivers/scsi/ufs/ufs-exynos.o
After:
text data bss dec hex filename
25213 7068 0 32281 7e19 ./drivers/scsi/ufs/ufs-exynos.o
(gcc version 10.3.0)
Link: https://lore.kernel.org/r/20210505190104.70112-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove leading spaces before tabs in Kconfig file(s) by running the
following command:
$ find drivers/scsi -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'
Link: https://lore.kernel.org/r/20210517095835.81733-1-juergh@canonical.com
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/target/target_core_user.c:1424:9-10: WARNING: return of 0/1 in function 'tcmu_handle_completions' with return type bool
Return statements in functions returning bool should use
true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Link: https://lore.kernel.org/r/20210515230358.GA97544@60d1edce16e0
Fixes: 9814b55cde ("scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found")
CC: Bodo Stroesser <bostroesser@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The comments in the enum ufs_pm_level definition are redundant. Remove the
comments from the ufs_pm_level enum and use designated initializers in the
ufs_pm_lvl_states[] definition instead.
Link: https://lore.kernel.org/r/20210519202058.12634-3-bvanassche@acm.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After commit 6c11dc0604 ("scsi: hisi_sas: Fix IRQ checks") we have the
error codes returned by platform_get_irq() ready for the propagation
upsream in interrupt_init_v1_hw() -- that will fix still broken deferred
probing. Let's propagate the error codes from devm_request_irq() as well
since I don't see the reason to override them with -ENOENT...
Link: https://lore.kernel.org/r/49ba93a3-d427-7542-d85a-b74fe1a33a73@omp.ru
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke
Hannes Reinecke
Bart Van Assche
Suganath Prabu S
John Garry
James Smart
Martin Wilck
Jiapeng Chong
Colin Ian King
Wei Ming Chen
Keoseong Park
Zhen Lei
Juerg Haefliger
kernel test robot
Sergey Shtylyov
zuoqilin